Trace elements (REE) and isotopes (O,C, Sr) to characterize the metasomatic fluid sources: evidence from the skarn deposit (Fe,W, Cu) of Traversella (Ivrea,Italy)

The skarn complex of Traversella was formed at the expense of various rock types (calcic hornfels, gneiss, dolomitic marble) occurring in the contact aureole of the dioritic intrusion of Traversella (30±5 Ma). Application of phase equilibria has fixed the temperature of the primary stage of skarn formation between 550° C to 625° C. Similar applications indicate a larger range of temperature (525° C to 300° C) for the secondary stage. The different types of skarn (primary stage) are enriched in REE relative to the corresponding precursor rock (T.R.=126 ppm (protolith) to 228 ppm (inner zone) for the skarn on gneisses; T.R.=14 ppm to 71 ppm for the skarn on calcic hornfelses; T.R.=12 ppm to 200 ppm for the skarn on dolomitic marbles), but all the inner zones of these different types of skarn show a similar REE distribution with a slight LREE fractionation and no Eu anomaly. It is inferred that the primary metasomatic fluid has a parallel REE pattern. The oxygen isotope composition of water in equilibrium with the early stage of skarn at T=600° C ranges from 8.3 per mil to 8.9 per mil. At the beginning of the first hydroxylation stage (secondary stage), the fluid σ ¹⁸O remains in the range observed in the primary stage but within it, there is a sharp decrease from 8.0 per mil to 5.0 per mil. During the sulphidation stage, the fluid σ ¹⁸O decreases more gradually from 5.0 per mil to 3.0 per mil. The I _Sr of the early skarn silicates ranges from the values observed in the dolomitic marbles (0.70874 to 0.70971) to the I _Sr of the intrusion (0.70947 to 0.71064). During the secondary stage, there is a progressive increase of the minerals I _Sr up to 0.71372. The REE pattern of the primary metasomatic fluid does not put any precise constraint on the primary fluid source. On the other hand, both stable and radiogenic isotopes suggest that the early high-temperature metasomatic fluid was isotopically equilibrated with the dioritic intrusion. This implies that this early fluid is either exsolved from the crystallizing intrusion or a metamorphic water previously equilibrated with the intrusion. During the secondary stage, the replacement of the early anhydrous phases by hydrated parageneses is accompanied by the mixing with meteoric fluid as indicated by stable (σ ¹⁸O) and radiogenic (⁸⁷Sr/⁸⁶Sr) isotopes.     

Field observations of the June 30, 2001 debris flow at Acquabona (Dolomites, Italy)

On June 30, 2001, a debris flow occurred in the Acquabona Creek, a small catchment of the Eastern Dolomites, Italy. This debris flow originated shortly after an intense rainstorm, characterised by a peak intensity of 8.6 mm per 10 min; it transported a total volume of 30,000 m³, consisting of poorly sorted gravely sand with boulders up to 3 m in diameter. The sediment erosion yield rate reached as high as 20 m³/m. In order to verify the accuracy of the field measurements, the total volume of debris deposits have was calculated using three different topographic measurement techniques: 3D laser scanning, terrestrial stereo-photogrammetry survey and total topographic station survey. Data collected so far show that no debris flow has occurred at Acquabona with a rainfall intensity lower than 4.6 mm per 10 min. Channel cross section measurements indicate that debris flow velocity ranges from 2.0 to 7.2 m/s along the lower flow channel and peak discharge ranges between 22 and 300 m³/s. Field estimates of the rheological properties indicate a yield strength ranging from 2,088 to 5,313 Pa and Bingham viscosity between 70 and 337 Pa · s. It is not still possible to identify a rainfall intensity and amount threshold for debris flow triggering, but the data so far collected emphasise that debris flows do not occur with a rainfall intensity lower than 4.6 mm per 10 min.     

江西香炉山钨矿床矽卡岩矿物和成矿花岗岩地球化学特征及其指示意义

江西香炉山大型钨矿床位于长江中下游成矿带南侧新识别的钨矿带西段,为一矽卡岩型白钨矿床。矽卡岩矿体主要产于中寒武统杨柳岗组含炭质灰岩和香炉山花岗岩接触部位。香炉山花岗岩具有细粒至中粗粒结构,主要由石英、钾长石、斜长石和黑云母组成,副矿物以钛铁矿为主。香炉山花岗岩的SiO₂含量为66.37%~67.76%,并具有较高的Na₂O+K₂O（8.33%~8.57%）和A/CNK（1.31~1.35）,因此属于强过铝质花岗岩。香炉山矽卡岩矿物主要为钙铁辉石为主,而石榴石以钙铝榴石为主并有少部分锰铝-铁铝榴石,同时主要的白钨矿分布于矽卡岩晚期网脉中呈他形粒状并具有贫Mo的特征。因此,香炉山钨矿具有还原型矽卡岩钨矿的特征。黄铜矿和磁黄铁矿的δ³⁴S_CDT值分别为1.0‰~4.2‰和3.0‰~5.2‰,均呈现出典型的岩浆硫同位素的特征,同时矽卡岩后期白钨矿稀土元素的流体模拟配分形式也为右倾,与香炉山花岗岩稀土元素特征一致,表明岩浆热液流体的参与贯穿整个矽卡岩成矿过程。香炉山花岗岩具有较低但变化范围较宽的Nb/Ta（6.7~11.4）,同时具有高Rb/Ba（1.6~2.4）和Rb/Sr（5.9~7.2）,暗示壳源富粘土物质为原始岩浆的物源,并可能伴有极少量的幔源物质加入。同时香炉山花岗岩高Rb（339×10^-6~406×10^-6）和Y+Nb（49.2×10^-6~62.0×10^-6）及高Nb（15.7×10^-6~24.1×10^-6）和低Y（33.5×10^-6~43.4×10^-6）,指示其为板内花岗岩。因此,香炉山钨矿形成于板内的拉张环境。结合区域研究资料,其可能与古太平洋板块中伊扎纳吉板片与太平洋板片间的洋脊俯冲,及太平洋板片回撤有关。

     

Three-dimensional modelling of an isolated carbonate buildup (Triassic, Dolomites, Italy)

The Middle Triassic carbonate buildups of the Dolomites show facies similarities with mud mounds but display apparent architectural elements of flat‐topped carbonate platforms. In order to test whether the facies similarities to mounds are also reflected in the internal buildup architecture, a three‐dimensional modelling study of the Middle Triassic Monte Cernera buildup has been carried out. The Cernera buildup exhibits apparent geometries suggesting a mounded platform in the lower and uppermost part of the buildup, separated by an interval with apparent platform geometry and a retrogradational platform interior, which is difficult to explain with a flat top platform model. For this purpose, a number of three‐dimensional models were constructed using the three‐dimensional modelling programme petrel ^TM. Key geological horizons were constructed based on outcrop measurements, intermediate horizons were calculated in the modelling program, and the intersections of the modelled layers with a digital topography surface were displayed and compared with outcrop photographs. The models were refined stepwise until a best fit with the actual bedding architecture was achieved. The best fit model shows that the mounded geometries in the lower and uppermost part of the buildup are real architectural elements. The intermediate platform stage, about 1·5 km across, had probably retained a mounded top with a relief of up to 50 m, which is difficult to distinguish from an absolutely flat top, but necessary to explain the retrogradational platform interior. The present study shows that Monte Cernera was dominated by mounded geometries at all stages of platform development. The mounded geometry plus facies data suggest that the platform is a deep‐water accumulation, below the zone of intense wave energy, but within the photic zone. The Cernera represents a tropical buildup type, which did not have the capacity to grow into continuously wave‐swept environments because of the small size and the absence of a wave‐resistant energy barrier. Such buildup types are probably common after major crises in earth history, when reef organisms were virtually absent.     

A lacustrine record of early Holocene watershed events and vegetation history,Corvara in Badia,Dolomites (Italy)

The early–middle Holocene lacustrine succession of Corvara in Badia (Italian Dolomites, 1521 m a.s.l.) records landslides and other watershed events before the onset of human pressure. The sensitivity of this archive to relate climate change, watershed processes and vegetation dynamics in the catchment has been explored through a stratigraphic study, including the analysis of sedimentological features, magnetic properties, palaeobotanical records and radiocarbon dating. A palaeolake existed between 10.1 k and 7 k cal. yr BP and was surrounded by a dense conifer forest. Long‐term forest dynamics driven by ecological processes and by climatic conditions favourable to upward forest expansion is recorded throughout the pollen record. Within the fine clastic sedimentation, distinct layers enriched in organic debris of terrestrial origin have been attributed to instant events produced by mass movements. Their age fits the chronology of large landslide events already known in the catchment, enabling correlation of the field evidence of landslides with the lacustrine record. Landslide frequency is controlled by geological and structural factors, but it is significantly modulated by the centennial–millennial climatic phases that characterise the Holocene in the Alps. The taphonomical properties of pollen and macroremains provided valuable insight on the mechanism of watershed processes. Copyright © 2006 John Wiley & Sons, Ltd.     

Geochemistry of lamprophyres from the Western Alps,Italy: implications for the origin of an enriched isotopic component in the Italian mantle

Cenozoic lamprophyres (minettes, spessartites, kersantite) from the Western Alps, northern Italy, represent small volume, mafic melts with high Mg#s and high Ni and Cr contents. All the lamprophyres show light REE enrichment, high incompatible element contents, and Ta, Ti and Nb troughs on chondrite-normalized diagrams. Age-corrected ⁸⁷Sr/⁸⁶Sr isotopic ratios (assuming t = 30 Ma) are highly variable and range from 0.70590 to 0.71884; ¹⁴³Nd/¹⁴⁴Nd ratios range from 0.51203 to 0.51242. Pb isotopic ratios are: ²⁰⁶Pb/²⁰⁴Pb = 18.669–18.895, ²⁰⁷Pb/²⁰⁴Pb = 15.605–15.689 and ²⁰⁸Pb/²⁰⁴Pb = 38.224–39.134. ⁸⁷Sr/⁸⁶Sr ratios show a negative correlation with ¹⁴³Nd/¹⁴⁴Nd, and a positive correlation with K, Ba, and Rb as well as with Ti, Th, Ta, Nb and Zr abundances. The primitive nature of the lamprophyres, coupled with their enriched incompatible trace element and isotopic signatures, suggest derivation from a metasomatized upper mantle source. Linear arrays in isotope space and elemental data plots suggest mixing between two distinct end-members in the Italian mantle; an enriched end-member that is isotopically similar to pelagic sediments, and a significantly less enriched end-member that approaches Bulk Earth values. New isotopic data indicate that the mantle source(s) of the lamprophyres from the Western Alps contain a very high proportion of the enriched end-member. The geochemical signature of the enriched end-member is attributed to fluids or melts derived from pelagic sediments subducted during the closure of the Tethyan Ocean in the late Cretaceous to early Tertiary.     

Proposal of a method to define areas of landslide hazard and application to an area of the Dolomites, Italy

A numerical–cartographical method has been developed to create landslide hazard maps. This method allows the assigning of a rating to the various parameters which contribute to landslides. The parameters considered are: (1) erodibility and degradability of the rocks and Quaternary deposits; (2) permeability of the ground to identify areas prone to hydraulic overpressure; (3) the geometric ratio between discontinuities and slope, and thickness of Quaternary deposits; (4) angle of the slopes; and (5) land use. A thematic map is constructed for each factor considered which defines different areas through ratings, after which all the thematic maps are overlaid and the ratings added up (or multiplied). The map which is thus obtained is reclassified in order to create the final map of landslide hazard. This method, which has already been tested in various areas, has produced excellent results in this case too, allowing a map to be constructed which corresponds to the actual instability problems.     

The effect of metasomatism on the Cr-PGE mineralization in the Finero Complex, Ivrea Zone, Southern Alps

The magmatic metasomatism that was responsible for producing chromitite–dunite bodies in the unusual phlogopite peridotite of the Finero Complex in Permian to Triassic times also influenced the Cr-platinum group elements (PGE) mineralization. At least the end stages of this metasomatism are recorded in compositional zoning of chromite grains in the podiform chromitite. Metasomatic melt, with or without vapor, reacted with chromite to produce core-to-rim Cr enrichment of extant chromite grains and was concurrent with pyroxene crystallization. Under conditions of lower melt/rock ratio, metasomatism resulted in core-to-rim Al enrichment in chromite and crystallization of amphibole between chromite and clinopyroxene. This early, high-temperature metasomatism is unrelated to the later and pervasive K-metasomatism that crystallized phlogopite and was associated with the intrusion of clinopyroxenite dikes that cut the peridotite. Much later, serpentinization of olivine locally depleted chromite in Al and enriched it in Fe and formed minor amounts of magnetite.The PGE, which are present mainly as laurite inclusions in chromite, were remobilized by the early metasomatism. This resulted in substantial variation in the PGE contents of chromitites and imposed a characteristic PGE pattern in which chondrite-normalized Os, Ir, Ru and Rh contents are high but Pt and Pd contents are low. The slopes of PGE chondrite-normalized concentration patterns are systematically related to absolute PGE abundance and to rock mode. Chromitites with low modal orthopyroxene, clinopyroxene, and amphibole exhibit negative PGE slopes and contain relatively high PGE concentrations, whereas chromitites rich in these silicate minerals have positive slopes and low PGE contents.     

Porosity distribution in cyclic dolomites of the Lower Qiulitag Group (Upper Cambrian) in northwestern Tarim Basin,China

Increasing interests in hydrocarbon resources at depths have drawn greater attentions to the deeply-buried carbonate reservoirs in the Tarim Basin in China. In this study, the cyclic dolomite rocks of Upper Cambrian Lower Qiulitag Group from four outcrop sections in northwestern Tarim Basin were selected to investigate and evaluate the petrophysical properties in relation to depositional facies and cyclicity. The Lower Qiulitag Group includes ten lithofacies, which were deposited in intermediate to shallow subtidal, restricted shallow subtidal, intertidal, and supratidal environments on a carbonate ramp system. These lithofacies are vertically stacked into repeated shallowing-upward, meter-scale cycles which are further grouped into six third-order depositional sequences (Sq1 to Sq6). There are variable types of pore spaces in the Lower Qiulitag Group dolomite rocks, including interparticle, intraparticle, and fenestral pores of primary origin, inter crystal, and vuggy pores of late diagenetic modification. The porosity in the dolomites is generally facies-selective as that the microbially-originated thrombolites and stromatolites generally yield a relatively high porosity. In contrast, the high-energy ooidal grainstones generally have very low porosity. In this case, the microbialite-based peritidal cycles and peritidal cycle-dominated highstand (or regressive) successions have relatively high volumes of pore spaces, although highly fluctuating (or vertical inhomogeneous). Accordingly, the grainstone-based subtidal cycles and subtidal cycle-dominated transgressive successions generally yield extremely low porosity. This scenario indicates that porosity development and preservation in the thick dolomite successions are primarily controlled by depositional facies which were influenced by sea-level fluctuations of different orders and later diagenetic overprinting.     

New chronological and stratigraphical data on the Ivrea amphitheatre (Piedmont, NW Italy)

The Ivrea amphitheatre (IA) in NW Italy has been studied since 1850, on pedostratigraphic and morphological bases. Three stratigraphic groups of glacial sediments were distinguished. Newly recognized stratigraphic boundaries are based on interstadial/interglacial units, palaeosols and lacustrine organic layers interbedded with glacigenic deposits, and on pedostratigraphy. Mapping of morphological features and associated marginal and sub-glacial deposit facies was used to characterize and reconstruct glacial margin fluctuations. Based on the field evidence, the stratigraphical limits recognized at single sites can be interpolated over the whole amphitheatre. Ten stratigraphic units (referred to as alloformations: Afs) were distinguished and mapped. They are related to at least as many glacial episodes ranging in age from the end of the Early Pleistocene to the Late Pleistocene. The youngest three glacial units (Serra Af, Piverone Af and Ivrea Af) and one interstadial level (Alice Superiore Unit between Serra and Piverone Afs) are discussed in detail. Based on biostratigraphical and pedological, as well as sedimentological and morphological data, the Serra Af can be attributed to MIS 6 and Piverone Af to MIS 4. The ¹⁰Be surface exposure ages from two boulders (27.9±3.1, 32.4±4.0 kyr) on the Serra d’Ivrea moraine provide only a minimum age for moraine construction. The alignment of typical ice marginal landforms (moraines and kame terraces) for the more recent unit (Ivrea Af) has allowed recognition of 12 principal stadials during the LGM and Lateglacial; 6 stadials in the amphitheatre and 6 stadials in Dora Baltea Valley, and reconstruction of the nature of the last glacial retreat from the amphitheatre to the cirques. ¹⁰Be exposure ages from three boulders related to Ivrea Af are 13.1±1.0, 17.4±2.6 and 20.8±1.5 ka. The latter two ages indicate that the Dora Baltea Glacier deposited the Ivrea Af in the IA during MIS 2. The ¹⁰Be exposure ages of 14.6±1.2 and 14.0±0.9 ka from a polished bedrock surface some 15 km upstream from the amphitheatre provide a minimum age for ice decay.     

Reverse telescoping in a distal skarn system (Campiglia Marittima,Italy)

The Campiglia Marittima Fe-Cu-Zn-Pb(-Ag) skarn deposit has long been regarded as a reference example of an exoskarn showing a symmetric outward mineralogical zoning of both skarn and ore minerals with respect to an axial mafic porphyry dike. Detailed field and underground mapping, along with three-dimensional reconstruction of the geometries of skarn and magmatic bodies, integrated with new petrographic, mineralogical and geochemical data, argue against this model. The shapes of the skarn bodies and the growth versors of skarn minerals in particular, are ascribed to the focusing of metasomatic fluids in sigmoid-shaped volumes of fractured host marble. After skarn formation, a mafic magma was emplaced, forming dikelets and filling residual pockets in the skarn. Field evidence and geochemical data show that the “hot” mafic magma interacted with the previously formed Zn-Pb(-Ag) skarn, triggering textural reworking and chemical redistribution of Zn-Pb sulfides as well as contributing to a late Fe-Cu mineralization. Campiglia Marittima skarn-ore system behaved at odd: a telescoping process is recorded, yet in a reverse way.     

Lateral variations in sediment composition and bedding in Middle Triassic interplatform basins (Buchenstein Formation, southern Alps, Italy)

ABSTRACT Hemipelagic deposits are widespread in Triassic sequences of the Alpine belt and provide important data for stratigraphy and the study of bedding rhythms. The area of the western and central Dolomites of northern Italy escaped strong alpidic deformation and preserves such deposits in their original palaeogeographic setting. The Buchenstein Formation, the object of this study, was deposited in up to 1000 m deep, Middle Triassic interplatform basins, which extend over an area of 500 km² within the Dolomites. Excellent outcrops and volcaniclastic markers allow a detailed correlation of the formation in both laminated (anoxic) and bioturbated facies down to a bed scale, and show its relationship to coeval carbonate platforms. Correlation of lithostratigraphically well‐constrained intervals in the bioturbated facies reveal that lateral thickening and thinning of the deposits depends on the amount of shallow‐water debris in the succession and is a function of the distance to coeval carbonate platform sources. In the laminated background deposit, thickness variations in limestones and marls parallel the thickness variations in ash layers, and were caused by local redeposition of sediment on the basin floor. Lateral persistence of laminae indicates that bottom currents were weak in the Buchenstein basin, but were able to redeposit mud in a significant way. In the area around Seceda and Geisler (western Dolomites), a lateral transition from dark‐grey laminated to grey bioturbated to red bioturbated facies is observed, which is probably linked to local relief with different oxygenation conditions on the sea floor. A comparison shows that decimetre‐scale bedding is preserved in all facies types and that the bedding rhythm is partly the result of different cementation of the sediment during early diagenesis. Correlation of individual layers in the bioturbated facies reveals that beds are thicker and enriched in lime mud in the western part of the basin, and decrease in thickness and contain less micrite towards the east, further away from the main shallow‐water areas. Nearslope calciturbidites change gradually from distinct layers into lateral arrays of micrite nodules and bands further out in the basin. These observations point to a platform source of lime mud in the Buchenstein basin.     

Intractions of mantle and crustal magmas in the southern part of the Ivrea Zone (Italy)

In the southern part of the Ivrea Zone (Italy), the majority of the Mafic Formation is composed of: 1. amphibole-bearing gabbro; 2. a series of rocks ranging from norites to charnockites; 3. leucocratic charnockites. In the proximity of metasedimentary septa within the Mafic Formation, the igneous lithologies are in many places intimately and chaotically intermingled, giving rise to a marble-cake structure. Whole-rock chemistry, and oxygen and strontium isotopic compositions indicate that the mafic and felsic rocks are dominated by mantle and crustal sources respectively. The norite-charnockite suite may be modelled as the mixing product of basic and acid melts. Abundant plastic deformation structures suggest that mafic and hybrid rocks experienced an important tectonic event during or soon after their crystallization. Melting of crustal country rocks continued after the deformation event and produced the undeformed leucocratic charnockites. The study area exemplifies some of the possible effects of the intrusion of a large volume of basic magma into hot crust.     

Tornadoes in Southern Apulia (Italy)

Numerous tornadoes have traversed southern Apulia in the course of the last five centuries, causing severe damage and a significant loss of life. Historical chronicles and newspaper articles allowed more than 30 tornadic events to be identified; in particular, 26 of these have occurred during the last two centuries. In all, 24 small towns and villages of southern Apulia suffered on at least one occasion the disastrous effects of being hit by a tornado.Collated data reveals that tornadoes generally form from May to December, with the most powerful events taking place in the month of September, followed by October and November. Tornadoes generally cluster in the southernmost area of the region and typically follow a path leading from the south-west to the north-east. Path length were observed to vary from 8 to 73km, and widths ranging from 60 to 850m.The metereological analysis carried out for the events occurred after 1950, even if based on a limited data set, reveals a few typical meteorological scenarios associated with the development of tornadoes over Salento.In southern Apulia tornadoes can be classified from levels A2 to A4 in accordance with the Damage Area Scale.     

Geochemistry and potential use of groundwater in the Rocca Busambra area (Sicily, Italy)

In the Rocca Busambra area (mid-west Sicily, Italy), from November 1999 to July 2002, 23 water points including wells and springs were sampled and studied for their chemical and isotopic compositions. Two rain gauges were also installed at different altitudes, and rainwater was collected monthly to determine the isotopic composition. The obtained results revealed the Rocca Busambra carbonate complex as being the main recharge area on account of its high permeability value. From a chemical view point, two main groups of water can be distinguished: calcium–magnesium–bicarbonate-type and calcium–magnesium–chloride–sulphate-type waters. The first group reflects the dissolution of the carbonate rocks; the second group probably originates from circulation within flyschoid sediments. Three water wells differ from the other samples due to their relatively high Na and K content, which probably is to be referred to a marked interaction with the “Calcareniti di Corleone” formation, which is rich in glauconite [(K, Na)(Fe³⁺, Al, Mg)₂(Si, Al)₄O₁₀(OH)₂]. In accordance with WHO guidelines for drinking water (2004), almost all the samples collected can be considered drinkable, with the exception of four of them, whose NO₃ ⁻, F⁻ and Na⁺ contents exceed the limits. On the contrary, the sampled groundwater studied is basically suitable for irrigation.     

The sinkhole of Doganella (Pontina Plain,central Italy)

A case study describes the recent catastrophic subsidence of the land surface neighboring the Lepini karstic range (Lazio region). A number of sinkholes in the Pontina plain are shown on the early topographic maps (dated 1850). Their origin is natural and related to subsidence that occurred during the Holocene. A review of sinkholes in central Italy was made by Facenna and others (1993). The aim of this study is to clarify the possible relationships between tectonics and sinkhole formation. The subsidence phenomena have been related to the slow dissolution of the buried carbonate bedrock due to fluids rich in CO₂, H₂S, and SO₂, which migrate through major tectonic fractures. Lowering of piezometric levels in waterbearing formations and seismic events are also important factors as they may upset the stability of a cave system buried by unconsolidated deposits.     

Phase equilibrium modelling of the amphibolite to granulite facies transition in metabasic rocks (Ivrea Zone,NW Italy)

The development of thermodynamic models for tonalitic melt and the updated clinopyroxene and amphibole models now allow the use of phase equilibrium modelling to estimate P–T conditions and melt production for anatectic mafic and intermediate rock types at high‐T conditions. The Permian mid‐lower crustal section of the Ivrea Zone preserves a metamorphic field gradient from mid amphibolite facies to granulite facies, and thus records the onset of partial melting in metabasic rocks. Interlayered metabasic and metapelitic rocks allows the direct comparison of P–T estimates and partial melting between both rock types with the same metamorphic evolution. Pseudosections for metabasic compositions calculated in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O–TiO₂–O (NCKFMASHTO) system are presented and compared with those of metapelitic rocks calculated with consistent end‐member data and a–x models. The results presented in this study show that P–T conditions obtained by phase equilibria modelling of both metabasic and metapelitic rocks give consistent results within uncertainties, allowing integration of results obtained for both rock types. In combination, the calculations for both metabasic and metapelitic rocks allows an updated and more precisely constrained metamorphic field gradient for Val Strona di Omegna to be defined. The new field gradient has a slightly lower dP/dT which is in better agreement with the onset of crustal thinning of the Adriatic margin during the Permian inferred in recent studies.     

Different approaches to the seismic hazard of Sannio-Matese (Southern Italy)

The seismic hazard of Sannio-Matese is calculated using a new seismogenetic zoning of southern Italy of seven areas and different, azimuth-dependent, attenuation laws. Various approaches (Gumbel's first and third asymptotic distribution, Cornell) lead to similar results for the different exposure times considered (100 and 200 years) and probability levels (37 and 68%). The present seismic regulation proposed in 1980 by the Italian National Council for Researches, and based on a different approach, is, in general, confirmed by the results.     

Rainfall induced debris flows in pyroclastic deposits, Campania (southern Italy)

A combination of empirical and physically based hydrological models has been used to analyze historical data on rainfall and debris-flow occurrence in western Campania, to examine the correlation between rainfall and debris-flow events.

Rainfall data from major storms recorded in recent decades in western Campania were compiled, including daily series from several rain gauges located inside landslide areas, supplemented by hourly rainfall data from some of the principal storms.

A two-phase approach is proposed. During phase 1, soil moisture levels have been modelled as the hydrological balance between precipitation and evapotranspiration, on a daily scale, using the method of Thornthwaite [Geograph. Rev. 38 (1948) 55].

Phase 2 is related to the accumulation of surplus moisture from intense rainfall, leading to the development of positive pore pressures. These interactions take place on an hourly time scale by the “leaky barrel” (LB) model described by Wilson and Wiezoreck [Env. Eng. Geoscience, 1 (1995) 11]. In combination with hourly rainfall records, the LB model has been used to compare hydrological effects of different storms. The critical level of retained rain water has been fixed by the timing of debris-flow activity, related to recorded storm events.

New rainfall intensity–duration thresholds for debris-flow initiation in western Campania are proposed. These thresholds are related to individual rain gauge and assume a previously satisfied field capacity condition. The new thresholds are somewhat higher than those plotted by previous authors, but are thought to be more accurate and thus need less conservatism.     

Occurrence of hypogenic caves in a karst region: Examples from central Italy

The caves of the Umbria and Marche regions in central Italy are made up of three-dimensional maze systems that display different general morphologies due to the various geological and structural contexts. At the same time, the internal morphologies of the passages, galleries, and shafts present some similarity, with solutional galleries characterized by cupolas and blind pits, anastamotic passages, roof pendants, and phreatic passages situated at different levels. Some of these caves are still active, as is the case for Frassassi Gorge, Parrano Gorge, and Acquasanta Terme, with galleries that reach the phreatic zone, where there is a rising of highly mineralized water, rich in hydrosulfydric acid, and with erosion of limestone walls and the formation of gypsum. Elsewhere there are fossil caves, such as Monte Cucco and Pozzi della Piana, where large speleothems of gypsum are present 500 m or more above the regional water table. In all of these important karst systems it is possible to recognize basal input points through fracture and intergranular porosity networks at the base of the oxidizing zone in the core of the anticline, where mineralized water rises up from the Triassic evaporitic layers in small hydrogeological circuits. Different underground morphologies can derive from the presence of a water table related to an external stream or from the confined setting of the carbonate rocks, underlying low permeable sedimentary cover, where artesian conditions can occur.