Transects of the ancient and modern continental margins of eastern Canada

Rocks of the west flank of the northern Appalachian Orogen (miogeocline) record the history of the late Precambrian-early Paleozoic passive continental margin of Eastern North America. The ancient margin was destroyed by ophiolite obduction and arc collision during the Ordovician Taconic Orogeny. The present sinuous form of the miogeocline is interpreted to reflect ancient promontories and re-entrants of a previous orthogonal margin bounded by rifts and transforms.Four major terranes are recognized east of the miogeocline in Newfoundland and Nova Scotia. From west to east, these are the Dunnage, Gander, Avalon and Meguma. The Dunnage and Gander terranes were linked to the miogeocline during the Middle Ordovician Taconian Orogeny. The Avalon terrane arrived later, possibly during the mid-Paleozoic Acadian Orogeny. The Meguma terrane of southern Nova Scotia had docked with the Avalon terrane by Carboniferous time. The Dunnage terrane contains arc volcanics which lie above an ophiolitic substrate. The Gander terrane comprises a thick sequence of clastic sedimentary rocks, underlain by basement rocks with continental affinities. It has been interpreted as a continental margin, perhaps once on the eastern side of the Paleozoic Iapetus ocean. The Avalon terrane consists of belts of sedimentary and volcanic rocks which are probably underlain by Grenvillian basement. Its tectonic affinities are unclear. The Meguma terrane comprises a thick sequence of sediments, derived from the south-east. It is found only in southeastern Atlantic Canada. The boundaries between terranes are compressional in the west and steep, transcurrent faults in the east.The surface extent of the geological terranes is grossly correlative with deep structural zones, although no direct evidence exists for linking the two because most surface structures can be traced geophysically to only a few kilometres depth. A striking feature of the deep crustal structure is a lower, high velocity crustal layer beneath the Dunnage and Gander terranes.The modern margin of Atlantic Canada developed by rifting and by transform motion between adjacent continents. Stretching and thinning of the lithosphere, and the consequent production of basaltic magma that in places intrudes or underplates the thinned continental crust, are the most likely processes responsible for the evolution of the modern margin. These processes predict the observed deep sedimentary basins along the margin, the thinning of continental crust, and the high seismic velocities found within the ocean-continent transition zones.Rifting adjacent to Nova Scotia began in Late Triassic-Early Jurassic time between the present African and North American plates. These plate motions are also responsible for the major transform margin south of the Grand Banks. Separation between Iberia and the eastern Grand Banks occurred in mid-Cretaceous time, before the Late Cretaceous opening of the Labrador Sea. While the rifted segments of the margin exhibit deep sedimentary basins and thinned continental crust, the Grand Banks transform segment is characterized by a sharp transition zone and a relatively thin sediment cover. Numerous volcanic seamounts are built on the ocean crust adjacent to this transform segment.Mimicry of Paleozoic promontories and re-entrants by modern rift and transform margin segments, the location of Mesozoic sedimentary basins on ancestral Appalachian structures, and the reactivation and propagation of major Precambrian and Paleozoic structural boundaries during the latest phase of ocean opening attest to ancestral controls of the modern margins.The rift phase of both the ancient and modern passive margins is characterized by volcanism, mafic dike intrusion and by the development of basins filled with clastic sediments. The drift phase of both the ancient margin and the present Nova Scotia margin is marked by a change in sedimentary environment, such that carbonates replaced the rift phase clastic sediments. Two of the markers used to delineate the ancient ocean-continent transition zone; carbonate banks and steep gravity anomaly gradients, should be used with caution as the modern analogs of these markers may lie 100 km or more of this transition zone. Furthermore, it is naive to view the ancient transition as simple and narrow, for the modern margins exhibits complex transition zones between 30 and 300 km wide.In general, the evolution of the ancient and modern passive margins appear to be remarkably similar. Predictably, closing the present Atlantic will mimic the evolution of the Appalachian Orogen.     

On sheared passive continental margins

Studies in intra-continental and intra-oceanic shear zones reveal structures that may be developed during the formation of a sheared passive continental margin.During the intra-continental shear stage of margin development, rapid vertical movement of the crust may occur resulting in small, tectonically-active basins containing thick sedimentary sequences. At deeper levels in the continental crust, more plastic deformation may lead to a zone of strongly sheared rocks that widens downwards. The tectonic fabric in this zone may exert some control over the subsequent development of the continent-ocean transition under the influence of regional stresses.The thermal event related to asthenosphere upwelling at sheared margins is a transient one and thus of less effect than the event on rifted margins. Nevertheless, following the event the cooling and contraction of oceanic crust against the continent may throw the oceanic crust into tension and lead to normal, block faulting in the oceanic regions analogous to the faulting seen in oceanic fracture zones. The subsidence of oceanic crust as it ages at the margin will either drag down the adjacent continental crust or, more likely, cause the oceanic crust to slip down by normal faulting along the continent-ocean boundary. The kinds of compressional features observed in oceanic fracture zones may also occur at sheared margins.     

Structure and evolution of an obliquely sheared continental margin: Rio Muni, West Africa

Oblique-shear margins are divergent continental terrains whose breakup and early drift evolution are characterized by significant obliquity in the plate divergence vector relative to the strike of the margin. We focus on the Rio Muni margin, equatorial West Africa, where the ca. 70-km-wide Ascension Fracture Zone (AFZ) exhibits oblique–slip faulting and synrift half-graben formation that accommodated oblique extension during the period leading up to and immediately following whole lithosphere failure and continental breakup (ca. 117 Ma). Oblique extension is recorded also by strike–slip and oblique–slip fault geometry within the AFZ, and buckling of Aptian synrift rocks in response to block rotation and local transpression. Rio Muni shares basic characteristics of both rifted and transform margins, the end members of a spectrum of continental margin kinematics. At transform margins, continental breakup and the onset of oceanic spreading (drifting) are separate episodes recorded by discrete breakup and drift unconformities. Oceanic opening will proceed immediately following breakup on a rifted margin, whereas transform and oblique-shear margins may experience several tens of millennia between breakup and drift. Noncoeval breakup and drift have important consequences for the fit of the equatorial South American and African margins because, in reconstructing the configuration of conjugate continental margins at the time of their breakup, it cannot be assumed that highly segmented margins like the South Atlantic will match each other at their ocean–continent boundaries (OCBs). Well known ‘misfits’ in reconstructions of South Atlantic continental margins may be accounted for by differential timing of breakup and drifting between oblique-shear margins and their adjacent rifted segments.     

Distinct continental margins and associated stratigraphic architecture patterns during the seafloor spreading of South China Sea

In this paper we compare four types of stratigraphic architectures around the continental margins in the South China Sea (SCS) based on a plentiful of seismic profiles. The results indicate that stratigraphic patterns are not only related closely to structure regimes of peripheral of the SCS, but also are restrained by crust structure from continental crust to oceanic crust. In the extensional setting, depositional centres during the syn‐spreading stage are located in the strong extensional area. A wedge‐decrease continental crust represented by the Pearl River Mouth type is characterized by high deposition and subsidence rate during the syn‐rifting and syn‐spreading stages in the distal zone. And in the Zhongjiannan type with a continental ribbon, high deposition and subsidence rate during the syn‐rifting and syn‐spreading stages are present in the proximal zone. However, in the southern and eastern margins with compressional setting, the Liyue and Zengmu microcontinent blocks are separated from the South China with the seafloor spreading of SCS, in which a confined or relative thin syn‐spreading deposits are presence. High deposition and subsidence rate is closely related to the collision or subduction condition during the post‐spreading stage in the Liyue bank type and the Zengmu type, a huge progradational clinoforms are present along the subduction and collision margin. Therefore, this study shows distinct stratigraphic architecture in different continental rifted margins, distinct depositional and subsidence characteristics formed during the process of lithospheric rupture can provide an effective method for the study on the continental marginal sea in the western Pacific.     

The age and origin of the deepest correlative structures recognized off canada and europe

Arcuate structures in the Avalon zone of Newfoundland and its geophysically inferred extension beneath the Grand Banks are either of Precambrian age, or represent probable reactivation of Precambrian structures. A similar arcuate pattern is followed by structures that can be traced geophysically between Iberia and Prance when they are restored to their pre-Mesozoic relative position. Although the Hercynian orogeny has increased their curvature within Iberia, the arcuate structures did exist in Precambrian time. The Avalonian and Iberian structures show good correlation on pre-Mesozoic paleogeographic reconstructions of the north Atlantic, but the gravity and magnetic expression of the arcs indicates that they have a higher mafic content on the Canadian margin. With evidence for Precambrian volcanism in Newfoundland and Precambrian tension in Iberia, it is possible that both subduction and basin-and-range type rifting occurred in different parts of that Precambrian craton, Mesozoic rifting of it having taken place near the boundary between the two regimes.     

Passive margins of the North and Central Atlantic: A comparative study

The main features of the volcanic and nonvolcanic passive margins of the North and Central Atlantic are considered. The margins are compared using rather well-studied reference tectonotypes as examples. The conjugate margins of the Norwegian-Greenland region and the margins of West Iberia and Newfoundland are chosen as tectonotypes of volcanic and nonvolcanic margins, respectively. The structural and magmatic features of the margins and their preceding history are discussed. A complex of interrelated attributes is shown for each tectonotype. The Norwegian-Greenland region close to the Iceland plume is distinguished by narrow zones of stretched continental crust, rapid localization of stretching with breakup of the continent, a high rate of subsequent spreading, and intense magmatism with the formation of a thick new crust at the margin and the adjacent oceanic zone. The Iberia-Newfoundland region, remote from the plumes, is characterized by wide zones of stretched continental crust, long-term and diachronous prebreakup extension propagating northward, extremely restricted mantle melting during rifting and initial spreading, and frequent occurrence of ancient crustal complexes and serpentinized mantle rocks at the margin. Crustal faults and a thin tectonized oceanic crust appear along the margin under conditions of slow spreading. A model of hot and fast spreading with a high degree of melting in the mantle is applicable to the Norwegian-Greenland region, whereas a model of cold and slow amagmatic rifting with a long pre-breakup stretching and thinning of the lithosphere is appropriate to the Iberia-Newfoundland margins. The differences in the development of the margins is determined by the interaction of many factors: deep temperature, rheology of the underlying lithosphere, heterogeneities in the previously formed crust, and the duration and rate of stretching. All of these factors can be related to the effect of deep plumes and propagation of the extension zone toward the segments of the cold Atlantic lithosphere. Both types of margins also reveal similar features, in particular asymmetry. It is suggested that the rotation forces superimposed on the general tectonomagmatic pattern controlled by plumes could have been the cause of structural asymmetry.     

Sedimentary basins of the atlantic margin of North America

Scismic exploration has identified eight distinct basin structures along the North American Atlantic continental margin forming a chain of elongate depocenters parallel to the continental slope and interrupted by transverse basement arches and impinging oceanic fracture zones. From south to north these are: South Florida—Bahamas Basin bounded on the north by Peninsular Arch and Bahama Escarpment fracture zone; Blake Plateau Basin with Cape Fear Arch and the impinging Great Abaco and Blake Spur fracture zones; Baltimore Canyon Trough bounded by the Long Island Platform and impinging Kelvin fracture zone; Georges Bank Basin with the bounding Yarmouth Arch; Scotian Shelf Basin with Scartarie and Canso Ridges and impinging Newfoundland Ridge fracture zone; Grand Banks Troughs and the intervening horst ridges; and the East Newfoundland Basin separated by Cartwright Arch and the impinging Gibbs fracture zone from the Labrador Shelf Basin.All the basins are characterized by great depths to basement filled with from 7 to 14 km of possible Triassic, Jurassic, Cretaceous and Tertiary sediments. Basement faulting controls the basins' boundaries and the faults have affected the overlying sediments. The major boundary faults of the basins undoubtedly formed during the initial rifting of the Atlantic margin in the Jurassic or perhaps Triassic. However, throughout the Mesozoic and Cenozoic these basement faults have moved in response to different orientations of stress and strain rates produced by continued spreading of the Atlantic Ocean. As a result, the basement faults of the Atlantic Margin were apparently influenced by at least three different local stress systems, spatially overlapping but temporally independent. These are the east—west extensional Atlantic Ocean stress system, the northwest—southeast extensional White Mountain stress system, and the north-south extensional Labrador Sea stress system.Some consequences of this basic tectonic setting were differential cross-strike tilts of the basin blocks with each basin moving somewhat independent of its neighbor. The resulting buildup of the basins' sedimentary geometries reflect these tectonic tilts and varying strain rates. Correlations are found between changes in orientation and rates of Atlantic sea-floor spreading with observed major sedimentary events such as progradations, planar bedding episodes, reef platform development, regressive hiatuses, and transgressions. An understanding of this marginal geosyncline could yield a model with predictability.     

The final rifting evolution at deep magma-poor passive margins from Iberia-Newfoundland: a new point of view

In classical rift models, deformation is either uniformly distributed leading to symmetric fault bounded basins overlying stretched ductile lower crust (e.g. pure shear McKenzie model) or asymmetric and controlled by large scale detachment faulting (simple shear Wernicke model). In both cases rifting is considered as a mono-phase process and breakup is instantaneous resulting in the juxtaposition of continental and oceanic crust. The contact between these two types of crusts is often assumed to be sharp and marked by a first magnetic anomaly; and breakup is considered to be recorded as a major, basin wide unconformity, also referred to as breakup unconformity. These classical models, are currently challenged by new data from deep rifted margins that ask for a revision of these concepts. In this paper, we review the pertinent observations made along the Iberia-Newfoundland conjugate margins, which bear the most complete data set available from deep magma-poor margins. We reevaluate and discuss the polyphase nature of continental rifting, discuss the nature and significance of the different margin domains and show how they document extreme crustal thinning, retardation of subsidence and a complex transition into seafloor spreading. Although our study is limited to the Iberia-Newfoundland margins, comparisons with other margins suggest that the described evolution is probably more common and applicable for a large number of rifted margins. These new results have major implications for plate kinematic reconstructions and invite to rethink the terminology, the processes, and the concepts that have been used to describe continental rifting and breakup of the lithosphere.     

Development peculiarities of the magmatism synchronous to the formation of the North Atlantic passive margins

Magmatism synchronous to the formation of passive margins of the North Atlantic is discussed. The main features and causes of the geochemical enrichment of the primary magmas at the margins have been established. This paper is based on the published data on the Norwegian-Greenland tectonotype of volcanic margins and the West Iberia-Newfoundland tectonotype of nonvolcanic margins. In the first tectonotype the hot rifting and active magmatism gave rise to the formation of a thick crust at the margin and the adjacent oceanic zone. The second tectonotype is characterized by cold amagmatic rifting and slow initial spreading, which led to the widespread occurrence of ancient continental complexes and serpentinized mantle rocks at the margin, as well as the thin and disturbed oceanic crust nearby. In order to characterize the magmatism and initial oceanic opening, the geological and geochemical data pertaining to the reference sections chosen for each margin were compared in detail. In particular, the geochemical and isotopic data on the flood basalts and suites of parallel dikes related to the pre- and synbreakup magmatic phases were involved for the Norwegian-Greenland region. The predominance of tholeiites enriched in lithophile elements and radiogenic isotopes, as well as a significant contribution of continental material to them, are typical of the volcanic margins. No less than two enriched magma sources for the lower part of the volcanic complex are suggested, whereas a depleted or slightly enriched source is established for the upper part. A more enriched source as compared with the volcanic margins of the Norwegian-Greenland region is suggested for the low-volume magmatic manifestations at the nonvolcanic Iberian margin. The tectonic settings of margins development and their relationships with the effect of deep plumes and the propagation of the extension zone toward the cold Atlantic lithosphere are discussed.     

大陆解体与被动陆缘的演化

火山型被动陆缘是大陆解体过程中形成的一类陆缘类型,其演化过程与活动陆缘一样复杂多变。随着近年来对大陆解体过程与被动陆缘演化的深入研究,对其沉积过程、岩浆活动以及变质作用研究都有了很大的进展。陆壳减薄解体的过程有许多不同的模式,不对称的简单剪切模式可能是火山型被动陆缘的成因,其机制是软流圈隆起的最大位置从剖面上看与地壳减薄最大位置不在一条垂线上,造成软流圈上升的岩浆在解体的大陆一侧形成火山型被动陆缘。被动陆缘的沉积建造由两套沉积物组成,一套是大陆解体的裂谷阶段所形成的陆相沉积物和双模式火山岩组合,另一套是稳定陆缘的复理石组合;岩浆作用中基性岩类反应了物质直接源于上地幔的主要特点,并有部分受到地壳混染的特征;变质作用中高温低压环境主要发生在裂谷作用阶段,其特点反映了大陆解体过程中随着时间的增温和减压过程,而拆离伸展阶段则被脆性变形所代替。     

Elastic thickness estimates at northeast passive margin of North America and its implications

Global estimates of the elastic thickness (Te) of the structure of passive continental margins show wide and varying results owing to the use of different methodologies. Earlier estimates of the elastic thickness of the North Atlantic passive continental margins that used flexural modelling yielded a Te value of ~20–100 km. Here, we compare these estimates with the Te value obtained using orthonormalized Hermite multitaper recovered isostatic coherence functions. We discuss how Te is correlated with heat flow distribution and depth of necking. The E–W segment in the southern study region comprising Nova Scotia and the Southern Grand Banks show low Te values, while the zones comprising the NE–SW zones, viz., Western Greenland, Labrador, Orphan Basin and the Northern Grand Bank show comparatively high Te values. As expected, Te broadly reflects the depth of the 200–400°C isotherm below the weak surface sediment layer at the time of loading, and at the margins most of the loading occurred during rifting. We infer that these low Te measurements indicate Te frozen into the lithosphere. This could be due to the passive nature of the margin when the loads were emplaced during the continental break-up process at high temperature gradients.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

Geophysical observations bearing upon the origin of the newfoundland ridge

Multichannel reflection seismic profiles extending southward from the Grand Banks show gently dipping reflectors within “basement” features underlying the Newfoundland Ridge. These reflections appear to be from sedimentary strata, indicating that the Newfoundland Ridge is a remnant of a former sedimentary basin, rather than a ridge of oceanic crust as prescribed by plate tectonic models. Probably this feature is underlain, and to some extent surrounded by, continental crust.     

Seismic models of inner parts of the Euro-Asian continent and its margins

Analogies are drawn between continental and continental margin structures on the basis of seismic data on the crustal structure of Eurasia and its Atlantic margins. Crustal thinning from the inner parts of the continent to its margins is observed to be a general feature common to the formation of deep midland depressions and sedimentary basins of shelf zones. The latter are characterized by crustal thinning and its assimilation. These phenomena cannot be explained solely be sea-floor spreading effects in the process of active rifting and formation of oceanic crust. It appears that the main role in the formation of the margins in played by processes of mantle erosion in connection with heating at continental margins and with the migration of mantle material to the lower part of the crust.     

Seismic image of undercrusted serpentinite beneath a rifted margin

During the continental rifting the upper mantle was unroofed, and the mantle rocks were transformed into serpentinite at the ocean-continent transition of the west Galicia margin (Spain). The serpentinite layer, several km thick, extends probably eastwards, beneath the highly thinned continental crust of the margin.
The serpentinite layer was recently imaged by seismic reflection. It is discontinuously and deeply layered. As serpentinized peridotite can have densities and seismic velocities comparable to those of the lower continental crust, we suggest that undercrusting by serpentinite can play a part in building the lower seismic crust in highly stretched continental rifted areas.     

Tectonotype of nonvolcanic passive margins in the Iberia-Newfoundland region

The tectonotype of nonvolcanic passive margins is discussed on the basis of data on the conjugate margins of West Iberia and Newfoundland. Magmatic, structural, and historical aspects are considered. The Late Mesozoic structural elements related to rifting and transition to spreading are considered, as well as the Early Mesozoic sedimentary basins that begin the history of oceanic opening. The problem is set to determine the tectonic conditions of the early opening of the ocean in the framework of the chosen tectonoptype. These conditions are compared with the setting at the volcanic margins. The formation of the conjugate Iberia-Newfoundland margins is reconstructed as an asymmetric rift system developing in an almost amagmatic regime. All three segments of the margins on both sides of the ocean reveal similar features of transverse zoning with zones of the tectonized continental, transitional, and oceanic crust oriented nearly parallel to the margin. Special attention is called to the old age of the continental crust and subcontinental mantle and the absence of newly formed crystalline crust; the stadial tectonic and rheological evolution of the crust and lithospheric mantle; the specific features of the transitional zone; the serpentinization and exhumation of mantle peridotites and their role in the development of detachment at the crust-mantle interface, related listric faults and the Peridotite Ridge, attenuation of the medium, further localization of continental breakup, and the eventual development of asymmetric conjugate margins. Two papers characterizing the tectonotypes of volcanic and nonvolcanic passive margins ([2] and this paper) determine the line of further comparative analysis necessary for insights into the geodynamics of ocean opening.     

Dating Gondwanan continental crust at the Rio Grande Rise,South Atlantic

Crystalline continental rocks and associated crust‐contaminated basaltic rocks were unexpectedly dredged on the crest and at seamounts of the Rio Grande Rise, South Atlantic. Zircon U–Pb ages of one gabbro (ca. 2,200 Ma) and four granitoids (between ca. 1,430–480 Ma) indicate that the breakup of SW Gondwana left behind continental fragments of dominantly African age. These rocks may have been incorporated into the oceanic lithosphere by complex processes including rifting and interaction of the Tristan‐Gough mantle plume with hyperextended continental margins. Until ca. 80–70 Ma, the Rio Grande Rise and an old portion of the Walvis Ridge formed a conjugate pair of aseismic ridges, and the Tristan‐Gough plume was positioned at the Mid‐Atlantic Ridge. The finding of continental rock fragments in one of these conjugate pairs opens new perspectives on the mechanisms of continental break‐up, the nature of this conjugate pair, and the geodynamic evolution of rifted Gondwana margins in the South Atlantic.     

The structure of the lower crust at the Argentine continental margin, South Atlantic at 44°S

It is well established that the Argentine passive margin is of the rifted volcanic margin type. This classification is based primarily on the presence of a buried volcanic wedge beneath the continental slope, manifested by seismic data as a seaward dipping reflector sequence (SDRS). Here, we investigate the deep structure of the Argentine volcanic margin at 44°S over 200 km from the shelf to the deep oceanic Argentine Basin. We use wide-angle reflection/refraction seismic data to perform a joint travel time inversion for refracted and reflected travel times. The resulting P-wave velocity-depth model confirms the typical volcanic margin structure. An underplated body is resolved as distinctive high seismic velocity (v_p up to 7.5 km/s) feature in the lower crust in the prolongation of a seaward dipping reflector sequence. A remarkable result is that a second, isolated body of high seismic velocity (v_p up to 7.3 km/s) exists landward of the first high-velocity feature. The centres of both bodies are 60 km apart. The high-velocity lower-crustal bodies likely were emplaced during transient magmatic–volcanic events accompanying the late rifting and initial drifting stages. The lateral variability of the lower crust may be an expression of a multiple rifting process in the sense that the South Atlantic rift evolved by instantaneous breakup of longer continental margin segments. These segments are confined by transfer zones that acted as rift propagation barriers. A lower-crustal reflector was detected at 3 to 5 km above the modern Moho and probably represents the lower boundary of stretched continental crust. With this finding we suggest that the continent–ocean boundary is situated 70 km more seaward than in previous interpretations.     

Crustal structure and transform margin development south of Svalbard based on ocean bottom seismometer data

The Barents Sea is located in the northwestern corner of the Eurasian continent, where the crustal terrain was assembled in the Caledonian orogeny during Late Ordovician and Silurian times. The western Barents Sea margin developed primarily as a transform margin during the early Tertiary. In the northwestern part south of Svalbard, multichannel reflection seismic lines have poor resolution below the Permian sequence, and the early post-orogenic development is not well known here. In 1998, an ocean bottom seismometer (OBS) survey was collected southwest to southeast of the Svalbard archipelago. One profile was shot across the continental transform margin south of Svalbard, which is presented here. P-wave modeling of the OBS profile indicates a Caledonian suture in the continental basement south of Svalbard, also proposed previously based on a deep seismic reflection line coincident with the OBS profile. The suture zone is associated with a small crustal root and westward dipping mantle reflectivity, and it marks a boundary between two different crystalline basement terrains. The western terrain has low (6.2–6.45 km s⁻¹) P-wave velocities, while the eastern has higher (6.3–6.9 km s⁻¹) velocities. Gravity modeling agrees with this, as an increased density is needed in the eastern block. The S-wave data predict a quartz-rich lithology compatible with felsic gneiss to granite within and west of the suture zone, and an intermediate lithological composition to the east. A geological model assuming westward dipping Caledonian subduction and collision can explain the missing lower crust in the western block by subduction erosion of the lower crust, as well as the observed structuring. Due to the transform margin setting, the tectonic thinning of the continental block during opening of the Norwegian-Greenland Sea is restricted to the outer 35 km of the continental block, and the continent–ocean boundary (COB) can be located to within 5 km in our data. Distinct from the outer high commonly observed on transform margins, the upper part of the continental crust at the margin is dominated by two large, rotated down-faulted blocks with throws of 2–3 km on each fault, apparently formed during the transform margin development. Analysis of the gravity field shows that these faults probably merge to one single fault to the south of our profile, and that the downfaulting dominates the whole margin segment from Spitsbergen to Bjørnøya. South of Bjørnøya, the faulting leaves the continental margin to terminate as a graben 75 km south of the island. Adjacent to the continental margin, there is no clear oceanic layer 2 seismic signature. However, the top basement velocity of 6.55 km s⁻¹ is significantly lower than the high (7 km s⁻¹) velocity reported earlier from expanding spread profiles (ESPs), and we interpret the velocity structure of the oceanic crust to be a result of a development induced by the 7–8-km-thick sedimentary overburden.     

The Avalon Zone: A Pan-African terrane in the Appalachian Orogen of Canada

The Precambrian sequences of the Avalon Zone in Canada (southeastern margin of the Appalachian Orogen) are interpreted as a Pan-African orogenic belt incorporated into the Appalachian Orogen during Palaeozoic times as its southeastern margin. The Precambrian evolution of the Avalon Zone was genetically unrelated to subsequent Palaeozoic evolution. The Avalon Zone shows marked similarities in age, tectonic history, and facies development to the Pan-African belts adjacent to the West African Craton. Precambrian evolution of the zone began with circa 800 Ma rifting of a sialic gneissic basement and deposition of a Middle Proterozoic(?) carbonate-clastic cover sequence. Early crustal rifting was associated with localized partial melting and metamorphism. Limited crustal separation led to the restricted development of circa 760 Ma oceanic volcanics. Continued rifting and subsequent closure of these narrow ocean basins led to the eruption of widespread subaerial volcanic suites, block faulting, granite plutonism, and local, late Proterozoic sedimentary basin formation. Precambrian evolution of the zone terminated with the Avalonian Orogeny (circa 650-600 Ma), a deformational event, the affects of which are most evident locally along the northwestern margin of the zone. The controlling features of the Proterozoic evolution of the Avalon Zone are a series of linear intracratonic troughs and small ocean basins that formed during thinning and separation of the crust by ductile spreading, rupture, and delamination (cf. Martin and Porada 1977). The variation in degree of crustal separation led to subsequent variation in orogenesis during late Proterozoic compression. The zone marks the original westward limit of Pan-African activity and displays no apparent genetic link with the Appalachian Orogen in Canada until Devonian times.