Geochemical,and stable and radiogenic isotope records in Devonian and Early Carboniferous carbonates from Valle de Tena,central Pyrenees (Spain): evidence for their diagenetic environments

Mineralogical, textural and geochemical investigations were made to determine the post-depositional evolution of Devonian and Early Carboniferous carbonates from Valle de Tena. The carbonate association is made up of low-Mg calcite, which occurs as micrite, spar cements, neomorphic patches and spar filling veinlets. Non-stoichiometric dolomite and ankerite occur as cements (dolomite also as replacements) in the Middle Devonian, post-dating calcite types. All these phases pre-date tectonic stylolites, indicating compaction after stabilization of the carbonate minerals. Strontium concentrations indicate that Early Devonian and Early Carboniferous micrites initially precipitated as aragonite; Middle and Late Devonian micrites precipitated as high-Mg calcites. Both precursors were diagenetically stabilized to low-Mg calcites through interaction with meteoric waters in phreatic environments. Trace elements in dolomite and ankerite indicate precipitation from Sr-enriched meteoric water. All studied carbonates, except Middle Devonian limestones, precipitated in reducing environments, which favoured incorporation of Fe and Mn. Late calcite generations precipitated from more saline waters than micrites. Light ¹⁸O values in micrites suggest alteration mainly in meteoric-phreatic environments. The dolomites and ankerites precipitated from more ¹⁸O-depleted fluids than the calcites, suggesting a greater contribution from meteoric waters. Variations in ¹³C of micrites represent primary secular trends, according to published ¹³C variations. The ¹³C oscillations within each succession probably relate to sea-level oscillations. Strontium isotopes also point to a meteoric origin of diagenetic fluids. Model calculations suggest that O and Sr isotopes equilibrated between calcites and fluid at relatively low water/rock ratios, whereas C isotopic signatures are inherited from limestones.     

Void-filling deposits in karst terrains of isolated oceanic islands: a case study from Tertiary carbonates of the Cayman Islands

Caves, fossil mouldic cavities, sinkholes and solution-widened joints are common in the Cayman and Pedro Castle members of the Bluff Formation (Oligocene-Miocene) on Grand Cayman and Cayman Brac because they have been subjected to repeated periods of karst development over the last 30 million years. Many voids contain a diverse array of sediments and/or precipitates derived from marine or terrestrial environs, mineral aerosols, and groundwater. Exogenic sediment was transported to the cavities by oceanic storm waves, transgressive seas, runoff following tropical rain storms and/or in groundwater. At least three periods of deposition were responsible for the occlusion of voids in the Cayman and Pedro Castle members. Voids in the Cayman Member were initially filled or partly filled during the Late Oligocene and Early Miocene. This was terminated with the deposition of the Pedro Castle Member in the Middle Miocene. Subsequent exposure led to further karst development and void-filling sedimentation in both the Cayman and Pedro Castle members. Speleothems are notably absent. The void-filling deposits formed during these two periods, which were predominantly marine in origin, were pervasively dolomitized along with the host rock 2–5 million years ago. The third period of void-filling deposition, after dolomitization of the Bluff Formation, produced limestone, various types of breccia, terra rossa, speleothemic calcite and terrestrial oncoids. Most of these deposits formed since the Sangamon highstand 125 000 years ago. Voids in the present day karst are commonly filled or partly filled with unconsolidated sediments. Study of the Bluff Formation of Grand Cayman and Cayman Brac shows that karst terrains on isolated oceanic islands are characterized by complex successions of void-filling deposits that include speleothems and a variety of sediment types. The heterogenetic nature of these void-filling deposits is related to changes in sea level and climatic conditions through time.     

Application of a solute transport model under variable velocity conditions in a conduit flow aquifer: Olalde karst system, Basque Country, Spain

A model based on numerical solutions, which allows for solving the dispersion equation under variable recharge and velocity conditions, is developed to simulate solute transport in conduit flow aquifers during flow recession periods. As an example, the evolution of a tracer in the little known karst conduit that links the sinking stream of Oma valley to the Olalde spring is investigated in the karstic region of Santa Eufemia-Ereñozar (Basque Country, Spain). The model, with different hypothetical structures, allows for obtaining series of tracer breakthrough curves, which are fitted to experimental data using an optimization algorithm. These results, although they can be used to simulate the tracer evolution between the two points considered, do not allow for determining the internal structure and spatial disposition of contributions in the aquifer.     

Sedimentology of Quaternary perched springline and paludal tufas: criteria for recognition, with examples from Guadalajara Province, Spain

Outcrop‐scale geometries and bed relationships of ambient temperature freshwater carbonates are poorly understood because many described tufas have been dismantled by erosion and present only part of a particular depositional model. At the field scale, four end‐member models encompass the tufa continuum: (1) perched springline; (2) paludal; (3) fluvial; and (4) lacustrine tufas. Individual bed types can occur with variable dominance within several of these models, but one or more beds are characteristically dominant only within a single tufa model, so it can be differentiated from relatively isolated outcrop fragments. Two models (perched springline tufas and paludal tufas) are known in outline only in the literature despite being present within the Quaternary deposits of most karstic regions. Perched springline tufas generally form lobate, fan‐shaped mound morphologies on hillslopes and develop from single or multiple spring resurgences. Mature deposits show a subhorizontal top and a steep face on the downflow side. The steep outer zones of tufa mounds may be developed into cascades with moss curtains or can be dominated by shallow rimstone pools according to face angle. Tufa deposits lying downslope of the mounds are usually detrital in nature, especially if some dismantling of the mound has occurred. The relatively thin subhorizontal lobe‐top deposits commonly contain organic‐rich deposits. Paludal tufas develop predominantly in waterlogged valley bottom situations, where line‐sourced waters emerge from valley side and bottom aquifers. Lime mud precipitation predominates in these sites. Mud is deposited as subhorizontal laminites that thin towards the valley axis and downstream of resurgences. Tufa spring‐mounds may form where lesser volumes of water are involved. Individual tussocks (phytoherm cushions) of grasses and rushes are the most diagnostic feature of the model, but sapropels and peats may be intercalated. Diagenesis in both models is rapid. Lithification of individual beds is virtually instantaneous and always occurs before the decay of the associated living vegetation. The resulting highly porous and permeable fabrics remain fresh in Holocene tufas, but aggrading neomorphism and partial spar infill of vegetation moulds is common in older deposits. Dissolution in many perched springline tufas is small scale. Many large cavities are primary, but with later coatings of speleothems. Early removal of organics from paludal tufas is responsible for autobrecciation and differential compaction.     

储层成岩产物对于油气运移的指示意义——以塔里木盆地群苦恰克构造带东河塘组为例

泥盆系东河塘组下段砂岩储层是塔里木盆地群苦恰克构造带内重要的勘探层系,有关储层内油气充注方向与富集规律的研究目前仍未有统一认识.研究层段内碳酸盐胶结物(主要为白云石和铁白云石胶结物)分布较为广泛,其中作为早成岩阶段产物的白云石胶结物的含量在平面上呈现出自东向西依次增加的趋势;而铁白云石胶结物则以交代先期形成白云石胶结物的形式产出于中成岩阶段,略滞后于储层内的油气充注,其胶结程度在平面上呈现出自东向西依次减弱的分布规律.铁白云石胶结物作为反映储层内较强还原环境的指示性矿物,其在储层内的分布规律也承担着判明油气运移方向或富集规律的“责任”,而其上述分布规律为研究区储层内油气自东向西充注提供了全新的判定依据.     

Rheological control on the tectonic evolution of a continental suture zone: the Variscan example from NW Iberia (Spain)

The Variscan continental suture zone exposed in NW Iberia is examined to uncover the long-lived rheological control exerted by the strata deposited over the external parts of Gondwana on its geodynamic evolution. The suture occurs within a set of allochthonous terranes whose limits were taken as domain boundaries to interpret the Variscan stacking of Paleozoic continental domains and retrodeform the resulting nappe pile. The suture zone formed due to closure of ocean basins located between Gondwana and Laurussia during the Late Paleozoic and consists of relics of oceanic and transitional crust. The suture zone exhibits a tabular to lens shape due to repeated tectonic events dominated by non-coaxial deformation (thrusts and low-angle normal faults). Thrusting and normal faulting also involved the margins of the continents bounding the suture. The structure of the continental blocks, however, is dominated by folds, particularly large nappe folds with pronounced superimposed flattening. The upper part of the basal allochthonous units comprises a rheologically incompetent domain below the suture zone. This domain is typified by the carbonaceous-rich strata, which are probably Ordovician–Silurian sediments based on U–Pb detrital zircon populations. The rheology of this layer determined the location of the first accretionary thrust that initiated the Late Devonian subduction of the Gondwana margin below the suture zone. By favoring fault development, the upper sequence of the basal allochthonous units as a whole influenced the exhumation of deep-seated continental crust, the transference of the suture zone over Gondwana, and the re-equilibration of the resulting overthickened crust.     

Absence of overall feedback in a benthic estuarine community: A system potentially buffered from impacts of biological invasions

Species introductions are among the most dramatic human-induced impacts on aquatic and terrestrial ecosystems around the world. Stability patterns of an estuarine benthic community were investigated through guild interaction models representing the community before and after human-mediated species invasions. The study area was Yaquina Bay, a developed estuary on the central Oregon coast, U.S., where at least 12 species of nonindigenous invertebrates have been inadvertently introduced. Three of the introduced species (the polychaetes Hobsonia florida and Pseudopolydora kempi and the cumacean Nippoleucon hinumensis) are probably among the 10 most abundant invertebrate species in the intertidal benthic community. To estimate effects and potential risks of species introductions on the native community we constructed 2 types of community models based on functional-group interactions, namely, activity guild models and trophic guild models. In both cases we observed that overall feedback has a strong tendency towards zero in pre-invasion and post-invasion models. We generated 12,000 random models of similar size and could not detect this tendency. We suggest that the weak or absent overall feedback in this community may be an ecological property and not an intrinsic property of large systems as such. The reduced response to input from either invertebrate invasions or removal of native top predators, may to some extent buffer the community from such impacts. Alternative guild models suggested increased risk of stability decline in the invaded community even after accounting for potential complexity effects on stabllity. Further species introductions in this intermediately invaded estuary should be avoided.     

Improved regional groundwater flow modeling using drainage features: a case study of the central northern karst aquifer system of Puerto Rico (USA)

In northern Puerto Rico (USA), subsurface conduit networks with unknown characteristics, and surface features such as springs, rivers, lagoons and wetlands, drain the coastal karst aquifers. In this study, drain lines connecting sinkholes and springs are used to improve the developed regional model by simulating the drainage effects of conduit networks. Implemented in an equivalent porous media (EPM) approach, the model with drains is able to roughly reproduce the spring discharge hydrographs in response to rainfall. Hydraulic conductivities are found to be scale dependent and significantly increase with higher test radius, indicating scale dependency of the EPM approach. Similar to other karst regions in the world, hydraulic gradients are steeper where the transmissivity is lower approaching the coastline. This study enhances current understanding of the complex flow patterns in karst aquifers and suggests that using a drainage feature improves modeling results where available data on conduit characteristics are minimal.     

Combined use of natural and artificial tracers to determine the hydrogeological functioning of a karst aquifer: the Villanueva del Rosario system (Andalusia,southern Spain)

Analysis of natural responses of karst springs provides information on the behavior of the aquifers they drain. Detailed monitoring and qualitative and quantitative analyses of natural responses, and environmental—total organic carbon (TOC), NO₃ ^?, Cl^? and intrinsic fluorescence—and artificial (fluorescent dye) tracers, in the water drained by Villanueva del Rosario spring (southern Spain), suggest the existence of a conduit flow system with rapid flows and very short transit times of water through the aquifer. This is in agreement with uranine and eosin breakthrough curves and with simple numerical models done using these data. However, due to the low capacity for natural regulation, not all the recharge effects are simultaneously transmitted to the spring water; given a single input, the system modulates and transfers hydrodynamic variations faster than variations of chemical composition and of water temperature. Additionally, time lags between maximum concentrations of natural and artificial tracers show that the global system response (including diffuse infiltration) is faster and more sensitive than that produced from infiltration concentrated at a single point on the surface (sinkholes).     

Inversion of a transfer system into lateral ramps: An example from the South-Central Pyrenees (Spain)

Field work in the South-Central Pyrenees suggests that omission contacts (i.e. younger over older rocks) occur at the base of the Cadí unit (Cadí thrust), and pass laterally into thrusts. This change occurs across tear faults which are present in the hangingwall of the Cadí thrust sheet and which controlled the deposition of Upper Cretaceous sediments (Adraén formation). Detailed mapping in the contact area between the Nogueres and Cadí units has shown that the actual thrust geometry in the study area is controlled by preexisting normal and transfer faults which developed in an already compressional context. Lateral ramps or tear faults develop depending on the angle between the pre-existing extensional transfer fault and the thrust transport direction.     

Imprints of hydrocarbon-bearing basinal fluids on a karst system: mineralogical and fluid inclusion studies from the Buda Hills,Hungary

Calcite veins and related sulphate–sulphide mineralisation are common in the Buda Hills. Also, abundant hypogenic caves are found along fractures filled with these minerals pointing to the fact that young cave-forming fluids migrated along the same fractures as the older mineralising fluids did. The studied vein-filling paragenesis consists of calcite, barite, fluorite and sulphides. The strike of fractures is consistent—NNW–SSE—concluding a latest Early Miocene maximum age for the formation of fracture-filling minerals. Calcite crystals contain coeval primary, hydrocarbon-bearing- and aqueous inclusions indicating that also hydrocarbons have migrated together with the mineralising fluids. Hydrocarbon inclusions are described here for the first time from the Buda Hills. Mixed inclusions, i.e., petroleum with ‘water-tail’, were also detected, indicating that transcrystalline water migration took place. The coexistence of aqueous and petroleum inclusions permitted to establish the entrapment temperature (80°C) and pressure (85 bar) of the fluid and thus also the thickness of sediments, having been eroded since latest Early Miocene times, was calculated (800 m). Low salinity of the fluids (<1.7 NaCl eq. wt%) implies that hydrocarbon-bearing fluids were diluted by regional karst water. FT-IR investigations revealed that CO₂ and CH₄ are associated with hydrocarbons. Groundwater also contains small amounts of HC and related gases on the basin side even today. Based on the location of the paleo- and recent hydrocarbon indications, identical migration pathways were reconstructed for both systems. Hydrocarbon-bearing fluids are supposed to have migrated north-westward from the basin east to the Buda Hills from the Miocene on.     

Covariance of C- and O-isotopes with magnetic susceptibility as a result of burial diagenesis of sandstones and carbonates: an example from the Lower Devonian La Vid Group,Cantabrian Zone,NW Spain

The burial diagenesis of sandstones, limestones, and dolostones of the Lower Devonian La Vid Group in the Cantabrian Zone (NW Spain) reveal a covariance of carbon and oxygen isotope values with magnetic susceptibility. Also, strontium isotopes, and to a minor degree Fe, follow this trend. The main carriers of the magnetic susceptibility appear to be diagenetic Fe-carbonates, i.e., siderite, ferroan dolomite, and ankerite, which occur as cements in primary and secondary voids, as well as in fractures. In some layers, especially at the top of the succession there occurs additionally secondary Fe-chlorite and pyrite. The Fe-carbonates were formed during upward migration of a reducing, iron-bearing, petroliferous fluid that was depleted in ¹³C and carried radiogenic Sr. Similar geochemical covariance and/or correlations can be expected in other sedimentary successions affected by the migration of petroliferous formation fluids.     

Initial assessment of recharge areas for large karst springs: a case study from the central Zagros Mountains,Iran

Sousan Spring emerges from the Keyno Anticline, Zagros Mountains (Iran), and the mean annual discharge is ~24 m³/s. Geological and hydrochemical evaluations suggest that the spring recharge is from the limestone Ilam-Sarvak Formation (Cretaceous) but the Mafaroon Fault, a major thrust feature, influences the regional groundwater flow path by juxtaposing other strata. Geological, geochemical, stable isotope and water balance studies were employed to interpret this behavior. Using the isotope data, the sources and elevations of the recharge area were found. Temporal variations of the isotopic data were compared with variations of electrical conductivity (EC). Unexpectedly, high EC was associated with a relative increase of discharge and depletion of δ¹⁸O. Several hypotheses were investigated and approximate water balance studies employed for validation. It was found that an elongated catchment on the Keyno Anticline plus a lesser catchment on a pair of parallel anticlines recharge the aquifer. While the long groundwater flow path along the Keyno Anticline plus guidance by Mafaroon Fault and the adjacent Garou shaly strata lead to increased EC in the Sousan Spring at the end of the dry season, a flow pulse from two adjoining anticlines (Mahalbakh and Shirgoon) arrives at the same time to increase the discharge and deplete the δ¹⁸O signal. Apparently the spring did not experience true base flow conditions during the recorded hydrological year. Although the spring response to specific precipitation events was similar to typical karst aquifers, standard interpretation of recession curves and related coefficients will not be practical at Sousan.     

Implications for the lithospheric structure of Cambay rift zone,western India:Inferences from a magnetotelluric study

Broad-band and long-period magnetotelluric(MT) data were acquired along an east-west trending traverse of nearly 200 km across the Kachchh,Cambay rift basins,and Aravalli-Delhi fold belt(ADFB),western India.The regional strike analysis of MT data indicated an approximate N59°E geoelectric strike direction under the traverse and it is in fair agreement with the predominant geological strike in the study area.The decomposed transverse electric(TE)-and transverse magnetic(TM)-data modes were inverted using a nonlinear conjugate gradient algorithm to image the electrical lithospheric structure across the Cambay rift basin and its surrounding regions.These studies show a thick(～1-5 km) layer of conductive Tertiary-Mesozoic sediments beneath the Kachchh and Cambay rift basins.The resistive blocks indicate presence of basic/ultrabasic volcanic intrusives,depleted mantle lithosphere,and different Precambrian structural units.The crustal conductor delineated within the ADFB indicates the presence of fluids within the fault zones,sulfide mineralization within polyphase metamorphic rocks,and/or Aravalli-Delhi sediments/metasediments.The observed conductive anomalies beneath the Cambay rift basin indicate the presence of basaltic underplating,volatile(CO_2,H_2 O) enriched melts and channelization of melt fractions/fluids into crustal depths that occurred due to plume-lithosphere interactions.The variations in electrical resistivity observed across the profile indicate that the impact of Reunion plume on lithospheric structures of the Cambay rift basin is more dominant at western continental margin of India(WCMI) and thus support the hypothesis proposed by Campbell Griffiths about the plume-lithosphere interactions.     

郯庐断裂带南段两侧花岗岩地球化学特征:对大别造山带中-下地壳流动的限定

大别造山带形成于印支期华南、华北板块陆-陆碰撞过程中。大别造山带造山后发生了山根减薄,其可能的动力学机制为岩石圈拆沉或中-下地壳的塑性流动。为了检验大别造山带是否在造山后发生过中-下地壳流动,本次工作从对比郯庐断裂带南段两侧大别造山带及洪镇、月山地区花岗岩地球化学特征入手,对同样位于郯庐断裂带南段东侧的徐桥岩体开展地球化学研究,为大别造山带造山后是否经历过中-下地壳流动提供证据。本次工作对徐桥岩体的研究表明,该岩体侵位时间为127Ma左右;具有较高的Si O_2和全碱含量;明显富集Rb、Th、U、Pb等大离子亲石元素(LILE),亏损Nb、Ta、Ti等高场强元素(HFSE);稀土元素配分图解中表现为轻稀土富集和重稀土亏损的右倾配分模式,具有较弱的Eu负异常。徐桥岩体的地球化学特征与造山带东侧的月山岩体类似,且与下扬子地区沿江地区侵入岩基本一致。但同样位于造山带东侧的洪镇岩体,其地球化学特征与月山、徐桥岩体明显不同,而与大别造山带一致的地球化学特征,说明两者可能具有相似的源区。基于以上分析,笔者推断洪镇花岗岩的物质来源可能为大别造山带加厚的地壳。而大别造山带东侧出现造山带地壳物质的现象表明造山带在造山后发生过地壳的塑形流动。由于大别造山带中-下地壳物质穿过郯庐断裂带南段,表明郯庐断裂带造山后大规模左行平移事件应发生于大别造山带地壳流动变形之前。     

Nine requirements for the origin of Earth's life:Not at the hydrothermal vent,but in a nuclear geyser system

The origin of life on Earth remains enigmatic with diverse models and debates.Here we discuss essential requirements for the first emergence of life on our planet and propose the following nine requirements:(1)an energy source(ionizing radiation and thermal energy);(2)a supply of nutrients(P.K.REE.etc.);(3)a supply of life-constituting major elements;(4)a high concentration of reduced gases such as CH_4,HCN and NH_3;(5)dry-wet cycles to create membranes and polymerize RNA;(6)a non-toxic aqueous environment;(7)Na-poor water;(8)highly diversified environments,and(9)cyclic conditions,such as dayto-night,hot-to-cold etc.Based on these nine requirements,we evaluate previously proposed locations for the origin of Earth's life,including:(1)Darwin's "warm little pond",leading to a "prebiotic soup" for life;(2)panspermia or Neo-panspermia(succession model of panspermia);(3)transportation from/through Mars;(4)a deepsea hydrothermal system;(5)an on-land subduct ion-zone hot spring,and(6)a geyser systems driven by a natural nuclear reactor.We conclude that location(6)is the most ideal candidate for the o rigin point for Earth's life because of its efficiency in continuously supplying both the energy and the necessary materials for life,thereby maintaining the essential "cradle" for its initial development.We also emphasize that falsifiable working hypothesis provides an important tool to evaluate one of the biggest mysteries of the universe-the origin of life.     

An evaluation of models for the kinematic evolution of thrust and fold belts: structural analysis of a transverse fault zone in the Front Ranges of the Canadian Rockies north of Banff,Alberta

The prevailing ‘piggyback’ conceptual model for the kinematics of ‘thin-skinned’ thrust and fold belts maintains that the main faults develop sequentially from the hinterland to the foreland, and from the top to the bottom of the accretionary wedge. Moreover, it presumes that when younger thrust faults originate, overlying older thrust faults become inactive and are carried forward passively. This appears to contradict the prevailing mechanical model for the evolution of ‘thin-skinned’ thrust and fold belts, the critical Coulomb wedge model, which requires that lateral growth of the wedge must be accompanied by vertical thickening of the wedge. Crosscutting relationships along a transverse fault zone in the Front Ranges of the Canadian Rockies north of Banff, Alberta, and patterns of overprinting of thrust-related folding on pre-existing thrust sheets, demonstrate substantial overlap in the times of displacement on four major thrust faults in this part of the Front Ranges. The presumption that displacement on one major thrust fault ends when displacement on a younger underlying thrust begins is a fallacy. There is no contradiction between the ‘piggyback’ conceptual kinematic model and the critical Coulomb wedge mechanical model for the evolution of ‘thin-skinned’ foreland thrust and fold belts. The main faults do originate sequentially from the hinterland to the foreland, and from the top to the bottom of the evolving wedge; but displacement occurs simultaneously on several major faults.     

Integration of outcrop and borehole image logs for high-resolution facies interpretation: example from a fluvial fan in the Ebro Basin, Spain

Electrical borehole image logs yield high-resolution information about variations in micro-resistivity along the borehole wall. To interpret these variations in terms of sedimentary structures and lithofacies types, calibration with real rock is needed. Normally, the only real rock available is core, and this only provides one-dimensional information. In this paper, the interpretation of fluvial facies types from borehole image logs was established by direct comparison with outcrops. Four fluvial facies associations were established in an outcrop study of a low net-to-gross fluvial succession: (i) meandering rivers, (ii) braided rivers, (iii) crevasse deltas, and (iv) crevasse splays. The lithofacies characteristics and palaeocurrent distributions of each fluvial facies association were established. Two 200 m deep wells were drilled behind the cliff face outcrops. One well was cored to a depth of 150 m and borehole image logs were recorded in both wells. The wells were correlated with the outcrop. The borehole image logs were analysed by their vertical colour succession and the dipmeter pattern. Image log facies were established, and these were interpreted in terms of the fluvial facies associations encountered in the corresponding outcrops. The study of borehole image logs yields a set of diagnostic criteria for a detailed fluvial facies interpretation and the establishment of depositional trends, and thus provides a powerful tool for the direct interpretation of fluvial facies in a reservoir setting.     

Long bone histology of a eusuchian crocodyliform from the Upper Cretaceous of Spain: Implications for growth strategy in extinct crocodiles

The long bone histology of a Late Cretaceous eusuchian crocodyliform from the Iberian Peninsula reveals clear variations in the cortical structure which reflects changes in the speed of bone deposition (i.e., skeletal growth) related to ontogeny. The presence of secondary woven-fibred bone tissue in the perimedullar region of the cortex, and the existence of an external fundamental system in the most external periostic cortex, which is a proxy for somatic maturity and effective cessation of growth, challenges the former idea that the growth strategy of extinct crocodylians fit in the typical ectotherm condition, according to which these animals grew slowly during life under an indeterminate growth strategy. The analysed specimen lived for a minimum of 16 years and the highest preserved apposition rates took place in an advanced ontogenetic stage. The study suggests that the general aspects of the modern crocodylian growth strategy were already in place in some lineages by the Cretaceous.     

Petrogenesis of chromites from the Manipur ophiolite belt,NE India: evidence for a supra-subduction zone setting prior to Indo-Myanmar collision

The Manipur ophiolite belt within the Western Ophiolite Belt of the Indo-Myanmar Ranges (IMR), consists of tectonised to massive serpentinised peridotite, dunite pods, chromitite pods/lenses, cumulates, dykes, volcanic rocks and pelagic sediments. Chromitite pods and lenses hosted in peridotitic mantle rocks show magmatic textures, post magmatic brecciation and ferritchromitisation. Electron microprobe analyses show two types of massive chromitite, with one group having high-Cr (Cr# 75–76), medium-Al (Al₂O₃ 12.2–12.4 wt%) chromites (Sirohi-type) and the other group (Gamnom-type) having a wide range of compositions with generally lower Cr and higher Al (Cr# 65–71, Al₂O₃ 15.7–19 wt%). Accessory chromites in peridotitic mantle rocks have consistently low Cr (Cr# 38–39) and high Al (Al₂O₃ 34–35 wt%), whereas chromites in dunite pods have intermediate compositions (Cr# ~60; Al₂O₃ 20.7–21.2 wt%). The chromite chemistry suggests moderate (20 %) partial melting of the tectonised mantle harzburgite. The estimated Al₂O_3melt, (FeO/MgO)_melt and TiO_2melt for the Sirohi-type chromites indicate boninitic parentage, whereas chromite compositions from the Gamnom area suggest mixed boninitic—island arc tholeiitic magmas. The compositions of magmatic chromites suggest that the Manipur ophiolite was formed in a supra-subduction zone (SSZ) setting.