山西省太原组和山西组煤的煤岩特征分析

在收集和整理大量山西省煤岩资料的基础上,分析了该省太原组和山西组煤的显微煤岩组分,并对各煤田太原组和山西组煤的R0,max的变化规律进行了研究。研究表明：山西省太原组和山西组煤中显微组分一般以镜质组为主,并且有从北向南有不断增加的趋势,惰质组次之,其趋势与镜质组相反,壳质组最少;太原组反射率值在0.6%～3.9%,整体上呈北低南高、西低东高的趋势,煤级从中煤级煤Ⅰ到高煤级煤Ⅱ都有赋存;山西组反射率值在0.6%～4.2%,其反射率变化趋势和煤级赋存特征与山西组类似。研究结果为评价和利用山西省的煤炭资源提供了依据。     

Studies of the relationship between coal petrology and grinding properties

The maceral and microlithotype composition of selected coals has been investigated with respect to the grinding properties, specifically Hardgrove grindability index (HGI), of the coals. The study expands upon previous investigations of HGI and coal petrology by adding the dimension of the amount and composition of the microlithotypes. Coal samples, both lithotypes and whole channels, were selected from restricted rank ranges based on vitrinite maximum reflectance: 0.75–0.80% R_max, 0.85–0.90% R_max and 0.95–1.00% R_max. In this manner, the influence of petrographic composition can be isolated from the influence of rank. Previous investigations of high volatile bituminous coals demonstrated that, while rank is an important factor in coal grindability, the amount of liptinite and liptinite-rich microlithotypes is a more influential factor. In this study, we provide further quantitative evidence for the influence of microlithotypes on HGI and, ultimately, on pulverizer performance.     

Coal petrology of coal seams from the Leão-Butiá Coalfield, Lower Permian of the Paraná Basin, Brazil — Implications for coal facies interpretations

In the Leão-Butiá Coalfield, Rio Grande do Sul the coal seams occur in the Rio Bonito Formation, Guatá Group, Tubarão Supergroup of the Paraná Basin, Brazil and are of Permian (Artinskian–Kungurian) age.This study is the first detailed investigation on the coal petrographic characterization of the coal-bearing sequence in relation to the depositional settings of the precursor mires, both in terms of whole seam characterization and in-seam variations. The study is based on the analyses of nine coal seams (I2, CI, L4, L3, L2, L1, S3, S2, S1), which were selected from core of borehole D-193, Leão-Butiá and represent the entire coal-bearing sequence.The interpretation of coal facies and depositional environment is based on lithotype, maceral and microlithotype analyses using different facies-critical petrographic indices, which were displayed in coal facies diagrams. The seams are characterized by the predominance of dull lithotypes (dull, banded dull). The dullness of the coal is attributed to relatively high mineral matter, inertinite and liptinite contents. The petrographic composition is dominated by vitrinite (28–70 vol.% mmf) and inertinite (> 30 vol.% mmf) groups. Liptinite contents range from 7 to 30 vol.% (mmf) and mineral matter from 4–30 vol.%. Microlithotypes associations are dominated by vitrite, duroclarite, carbominerite and inertite. It is suggested that the observed vertical variations in petrographic characteristics (lithotypes, microlithotypes, macerals, vitrinite reflectance) were controlled by groundwater level fluctuations in the ancient mires due to different accommodation/peat accumulation rates.Correlation of the borehole strata with the general sequence-stratigraphical setting suggests that the alluvial fan system and the coal-bearing mudstone succession are linked to a late transgressive systems tract of sequence 2. Based on average compositional values obtained from coal facies diagrams, a deposition in a limno-telmatic to limnic coal facies is suggested.     

Petrographic characteristics and depositional conditions of Permian coals of Pench, Kanhan, and Tawa Valley Coalfields of Satpura Basin, Madhya Pradesh, India

This paper attempts to characterize the coals of Satpura Gondwana basin using a large number of pillar coal samples drawn from the working coal mines of Pench, Kanhan, and Tawa (Pathakhera) Valley Coalfields of this basin. This westernmost Gondwana basin of Peninsular India is graben/half-graben type and occupies an area of 12 000 km² with sedimentary fills (>5000 m) ranging in age from Permian to Cretaceous. The Barakar Formation (Permian) is exclusively coal-bearing with a total coal reserve of nearly 2000 Mt. The results show that the coals of this basin are equally rich in inertinite (22.8–58.7%, 24.5–62.0% mmf basis) and vitrinite (24.4–52.4%, 24.4–56.0% mmf basis). The concentration of liptinite ranges from 8.8% to 23.2% (9.0–26.0% mmf basis). The dominant microlithotypes of these coals are inertite and vitrite with comparatively low concentrations of vitrinertite and clarite. The vitrinite reflectance (Rom% values) suggests that the Pench Valley (0.30–0.58%) coals are subbituminous C to high volatile C bituminous in rank, while the Kanhan and Tawa Valley coals (0.52–0.92%) are subbituminous A to high volatile A bituminous in rank. The localized enhancement of rank in the latter two basins has been attributed to the extraneous heat flow from deep-seated igneous intrusions in the basin. The microlithotype composition of these coals is suggestive of their evolution in limno-telmatic zones, under fluvio-lacustrine control with the development of upper deltaic and lower deltaic conditions near the fresh water lacustrines. The floral input is characteristic of forest swamps with intermittent floods, leading to the development of reed moor and open moor facies, particularly in the Pench Valley basin. The Gelification Index (GI) and Tissue Preservation Index (TPI) are suggestive of terrestrial origin with high tree density. Further, moderately high GI and exceedingly high telovitrinite based TPI along with high ash content, particularly for the coals of Kanhan and Tawa Valley Coalfields, are indicative of the recurrence of drier conditions in the forested swamps. Furthermore, lateral variation in TPI values is indicative of increase in the rate of subsidence vis-à-vis depth of the basin from east to west (Pench to Tawa Valley Coalfield). The Ground Water Index (GWI) suggests that these coals have evolved in mires under ombotrophic to mesotrophic hydrological conditions. The Vegetation Index (VI) values are indicative of the dominance of herbaceous plants in the formation of Pench Valley coals and comparatively better forest input in the formation of Kanhan and Tawa Valley coals.     

Application of electron paramagnetic resonance spectroscopy to examination of carbonized coal blends

Paramagnetic centers in two- and three-component coal blends carbonized at 1000 °C were studied by X-band (9.3 GHz) electron paramagnetic resonance (EPR) technique. The blends were prepared from three different Polish coals with carbon contents [wt.%]: 88.66, 86.21, and 82.67, respectively. The aim of this work was to compare EPR parameters and concentrations of paramagnetic centers in the initial and carbonized coal samples. Furthermore the spin–spin and spin–lattice interactions were characterized.EPR spectra were measured with magnetic modulation 100 kHz and microwave power 0.7 mW. Amplitudes and linewidths of EPR spectra were obtained. g-Factors were calculated from resonance condition. Concentrations of paramagnetic centers in the samples were determined. Influence of microwave power in the range 0.7–70 mW on EPR spectra was analyzed.All the studied samples revealed paramagnetism. Unpaired electrons are localized in the same atoms, because similar g-values in the range 2.0035–2.0038 were obtained for all the original samples. The EPR parameters of coal blends were additive in comparison with the parent coals. EPR spectra strongly changed after carbonization of the coal samples. Narrower EPR lines were measured for the original coal samples than for carbonized ones. We detected lower concentrations of paramagnetic centers in carbonized three-component coal blends than in two-component carbonized blends. EPR lines of the studied carbonized blends were not saturated at the microwave power used, which suggests fast spin–lattice relaxation processes in the samples. EPR examination proved chemical interactions between coal constituents during carbonization of coal blends.     

Organic petrology and source rock potential of sediments in the Eromanga Basin, South Australia

Cuttings and cores from the Poolowanna 1 well, Eromanga Basin, South Australia (in which oil was discovered in Lower Jurassic reservoirs) and the Macumba 1 well (no oil) have been analyzed petrographically to assess the nature of the coals and dispersed organic matter present. The Jurassic and Cretaceous coals have medium to high vitrinite contents, low to relatively high exinite, and medium to low inertinite contents. The dispersed organic matter has comparatively less vitrinite, more exinite and/or more inertinite than the associated coals. The microlithotype compositions of the coals indicate that the original vegetation was largely woody in character and was buried before much oxidation had occurred.The Jurassic sediments contain up to 2% dispersed organic matter by volume, 0–75% of which is exinite, including alginite. Vitrinite reflectances range from 0.5 to 0.7%. Where sufficiently mature, the Jurassic sediments are good potential source rocks for hydrocarbons.Statistical testing of the analytical results for the Jurassic Poolowanna Formation using Kendall's τ as a measure of dependence shows that there is a significant association between the macerals in coal and dispersed organic matter. The ratio of exinite to inertinite in dispersed organic matter is reasonably well predicted by the corresponding ratio in the associated coal.     

Petrological, organic geochemical and geochemical characteristics of coal from the Soko mine, Serbia

A petrological, organic geochemical and geochemical study was performed on coal samples from the Soko Mine, Soko Banja basin, Serbia. Ten coal and two carbonaceous clay samples were collected from fresh, working faces in the underground brown coal mine from different parts of the main coal seam. The Lower Miocene, low-rank coal of the Soko Mine is a typical humic coal with huminite concentrations of up to 76.2 vol.%, liptinite less than 14 vol.% and inertinite less than 11 vol.%. Ulminite is the most abundant maceral with variable amounts of densinite and clay minerals. Sporinite and resinite are the most common macerals of the liptinite group. Inertodetrinite is the most abundant maceral of the inertinite group. The mineral-bituminous groundmass identified in some coal samples, and carbonaceous marly clay, indicate sub-aquatic origin and strong bacterial decomposition. The mean random huminite reflectance (ulminite B) for the main coal seam is 0.40 ± 0.05% Rr, which is typical for an immature to early mature stage of organic matter.The extract yields from the coal of the Soko Banja basin ranges from 9413 to 14,096 ppm, in which alkanes constituted 1.0–20.1%, aromatics 1.3–14.7%, asphaltenes 28.1–76.2% and resins 20.2–43.5%. The saturated hydrocarbon fractions included n-C₁₅ to n-C₃₂, with an odd carbon number that predominate in almost all the samples. The contents of n-C₂₇ and n-C₂₉ alkanes are extremely high in some samples, as a contribution of epicuticular waxes from higher plants. Acyclic isoprenoid hydrocarbons are minor constituents in the aliphatic fraction, and the pristane/phytane (Pr/Ph) ratio varies between 0.56 and 3.13, which implies anaerobic to oxic conditions during sedimentation. The most abundant diterpanes were abietane, dehydroabietane and 16α(H)-phyllocladane. In samples from the upper part of the coal seam, diterpanes are the dominant constituents of the alkane fraction. Polycyclic alkanes of the triterpane type are important constituents of alkane fractions. The occurrence of ββ- and αβ-type hopanes from C₂₇ to C₃₁, but without C₂₈, is typical for the Soko Banja coals.The major and trace elements in the coal were analysed using X-ray fluorescence (XRF), and inductively coupled plasma-mass spectrometry (ICP-MS). In comparison with world lignites, using the geometric mean value, the coal from the Soko Banja Basin has a high content of strontium (306.953 mg/kg). Higher values than the world lignites were obtained for Mo (3.614 mg/kg), Ni (8.119 mg/kg), Se (0.884 mg/kg), U (2.642 mg/kg) and W (0.148 mg/kg). Correlation analysis shows inorganic affinity for almost all the major and trace elements, except for S, which has an organic affinity.     

Petrological evolution of the Paleogene coal deposits of Jammu, Jammu and Kashmir, India

A detailed macro- and micro-petrological investigation of 8 coal seam profiles of Eocene age from the sub-Himalayan zone of Jammu was undertaken in order to characterize them petrographically and to focus on their evolution. The quantitative data suggest that these coals are vitrinite rich, with low concentrations of inertinite and rare occurrences of liptinite. According to microlithotype concentration these coals may be characterized as vitrinite rich, with minor amounts of clarite, vitrinertite and trimacerite. The dominant minerals are clays, siderite and pyrite (occurring mostly as disseminations, cavity filling and in framboidal state). These coals are vitric in type, low volatile bituminous in rank and ashy in grade.The petrographic character and the presence of teleutospores suggest that, similar to other Tertiary coal deposits in the world, the angiosperm flora contributed chiefly to the development of coal facies in the area. The maceral and microlithotype composition shows that these coals originated from the low forest and undisturbed (in situ) peat in foreland basins under limno-telmatic depositional conditions. The water was brackish with regular influxes of fresh water.     

Petrographic characteristics and depositional conditions of Eocene coals of platform basins, Meghalaya, India

The coal deposits of Meghalaya occur in the Lakadong Sandstone (25–250 m thick) of Eocene age. The coal-bearing formations are understood to have been deposited over platform areas in estuarine and lagoonal environments and subjected to recurrent marine transgressions and regressions during the Eocene period. There are three major groups of coalfields in Meghalaya, viz. Garo Hills (West Daranggiri and Siju Coalfields), Khasi Hills (Langrin and Mawlong–Shella Coalfields) and minor coalfields (Laitryngew, Cherrapunji and Bapung Coalfields). Pillar coal samples have been collected from 10 seams at 15 locations and have been subjected to a detailed petrographic examination for their characterization. An effort has been made to trace the path of their evolution based on coal petrography-based models. The quantitative petrographic analysis shows that these coals are vitrinite rich (45.0–92.9%, mean 73.4% mmf basis) with low concentration of inertinite (0.0–13.8%, mean 3.0% mmf basis), whereas the liptinite occurs in appreciable concentration (5.5–53.1%, mean 22.5% mmf basis). Further, these coals are rich in vitrite (51.6–100%, mean 78.3% mmf basis). The volatile matter (from 38.5% to 70.0%, d.a.f.) and vitrinite reflectance (Rom from 0.37% to 0.68%) characterize these coals, as per German (DIN) and North American classification, approximately as sub-bituminous ‘C' to high volatile ‘C' bituminous. The occurrence of teleutospore (single, double and triple celled) suggests that these coals have originated from a characteristic Tertiary flora. The maceral and microlithotype composition in the coal petrography-based depositional models suggest that the coals of Garo Hills were formed in reed to open water swamps in telmatic to limnic conditions. The coals of Khasi Hills were dominated by forest swamps and telmatic to limno-telmatic conditions. In addition, the occurrence of large-size resins suggests prolific growth of conifers in the swamps.     

Petrology of oligocene coal, makum coalfield, assam, Northeast India

There are five workable coal beds in the Tikak Parbat Formation of the Barail Group in the Makum coalfield, Tinsukia District, Assam. Two of these beds, 18 and 6 m thick, are persistent across the field. The coal is high volatile bituminous B/C, has excellent coking properties, and is of great importance as a blending coal to improve the coking properties of the lower-quality Gondwanan coals.These coals are bimacerites as vitrinertite or trimacerites as duroclarite. Virtrinite predominates with minor amounts of other macerals and minerals. The high percentage of vitrinite indicates that the bark and woody tissues were the dominant contributors to the precursor peat. These peats were strongly decomposed under anaerobic conditions as indicated by the abundance of the collinite type of vitrinite.     

On the effects of petrographic composition on coalbed methane sorption

The effect of petrographic composition on the methane sorption capacity has been determined for a suite of coals and organic-rich shales. Subbituminous and bituminous coals were separated into bright and dull lithotypes by hand-picking. The methane sorption capacities range between 0.5 and 23.9 cm³/g at a pressure of 6 MPa. The low volatile bituminous Canmore coal and the anthracite sample have the highest capacities with the “natural coke” having the lowest. For low-rank coals there is no significant difference between bright and dull samples except for one coal with the dull sample having a greater sorption capacity than its bright equivalent. For higher-rank coals, the bright samples have a greater methane capacity than the dull samples and the difference between sample pairs increases with rank. The boghead coal samples have the highest sorption capacities in the liptinite-rich coals suite and are higher than subbituminous to medium volatile bituminous samples. Pore size distribution indicates that methane is held as solution gas in liptinite-rich coals and by physical sorption in micropores in liptinite-poor coals. These contrasting processes illustrate that liptinite-rich samples need to be independently assessed. The positive relationship between reactive inertinite content and methane sorption capacity occurs within the subbituminous to medium volatile bituminous coals because the reactive inertinite is structurally similar to vitrinite and have a higher microporosity than non-reactive inertinite. Reactivity of inertinite should be assessed in CBM studies of dull coals to provide a better understanding of petrographic composition effects on methane capacity.     

Relationship between the technical parameters of cokes produced from blends of three Polish coals of different coking ability

The demand for metallurgical coke for blast furnaces is forcing the coking industry to look for new sources of coking coals. The physical and chemical parameters of coals used in coking blends determine the quality (reactivity and strength) of the finished cokes. This study examines the technical properties of the cokes produced from various blends of three Polish coals with different coking. These coals were collected from three mines: Zofiówka, Szczygłowice, and Krupiński (Upper Silesian Coal Basin, Poland). The coal charges were coked in the laboratory scale, at temperatures of up to 1000 °C, in an inert atmosphere. The coke reactivity (index CRI) and the coke strength after reaction (CSR) were measured and correlated to the properties of parent coals using statistical analysis. The result of this study shows strong relationships between the concentration of the best coking coal (Zofiówka) in the blend and the CRI and CSR of the resulting coke. The CRI and CSR parameters for cokes obtained from single coals and from their blends show the additive character. This study also confirms the linear relationship between CRI and CSR parameters of the cokes.     

The role of coal petrographic characteristics in evaluating the non-coking nature of the coals of ramagundam and Kothagudem coalfields,Godavari Valley Basin,Andhra Pradesh,India

The maceral and microlithotype compositions of coals representative of the different coal seams of the Ramagundam and Kothagudem coalfields, Godavari Valley Basin, are compared with those of the Ib River, Talcher, South Karanpura, Hura, and Brahmani coalfields. The vitrite + clarite—“Intermidiates”—durite + fusite + shale (<20%) triangular diagram places these coals in the area of non-coking coals, clearly distinct from the coking and semi-coking coals. The vitrinite reflectance is low (R_ormoil^aver: 0.38–0.71%), far below the coking-coal range. Thus, based on petrographic composition and rank, these coals are of non-coking nature. A triangular diagram is proposed delineating the coking, semi-coking and non-coking coal areas for the Gondwana coals of India.     

The thermal decomposition studies of three Polish bituminous coking coals and their blends

The objective of this work was to investigate the thermal decomposition of various bituminous coal blends. Three Polish coals of varying rank (82.7, 86.2 and 88.7 wt.% carbon content) and caking ability (weak, moderate and strong) were collected from the Krupiński, Szczygłowice and Zofiówka mines, respectively. These coals were used to prepare binary and ternary blends. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA) were used. The weight loss and heat flow during pyrolysis, and storage/loss elastic modulus measured as a function of increasing temperature were related to the caking ability of coals. Parameters determined with the TGA and the DSC methods in the binary and ternary blends were correlated with the proportion of strongly-caking-coal concentration in the blend. The weight loss of coal blends was found to be additive parameter. The DSC thermograms of binary blends were found to be different from those of the ternary blends, which suggests a different course for this blend pyrolysis.     

Anomalous gold contents in brown coals and peat in the south-eastern region of the Western-Siberian platform

One hundred twenty-two samples of Jurassic and Paleogene brown coals and 1254 peat samples from the south-eastern region of the Western-Siberian platform were analyzed for gold by the neutron-activation method. Mean content of Au in Jurassic coals is 30 ± 8 ppb, in Paleogene coals is 10.6 ± 4.8 ppb, and in peat is 6 ± 1.4 ppb. Concentrations of gold as high as 4.4 ppm were found in coal ash and 0.48 ppm in the peat ash. Coal beds with anomalous gold contents were found at Western-Siberian platform for the first time.Negative correlation between gold and ash yield in coals and peat and highest gold concentrations were found in low-ash and ultra-low-ash coals and peat. Primarily this is due to gold's association with organic matter.For the investigation of mode of occurrence of Au in peat the bitumen, water-soluble and high-hydrolyzed substances, humic acids, cellulose and lignin were extracted from it. It was determined that in peat about 95% of gold is combined with organic matter. Forty to sixty percent of Au is contained in humic acids and the same content is in lignin. Bitumens, water-soluble and high-hydrolyzed substances contain no more than 1% of general gold quantity in peat.The conditions of accumulation of high gold concentrations were considered. The authors suggest that Au accumulation in peat and brown coals and the connection between anomalous gold concentrations and organic matter in low-ash coals and peat can explain a biogenic–sorption mechanism of Au accumulation. The sources of formation of Au high concentration were various Au–Sb, Au–Ag Au–As–Sb deposits that are abundant in the Southern and South-Eastern peripheries of the coal basin.     

Chemical and petrographical characterization of feed coal, fly ash and bottom ash from the Figueira Power Plant, Paraná, Brazil

The aim of the present study is the petrographic and chemical characterization of the coal at the Figueira Power Plant, Paraná, Brazil, prior and after the beneficiation process and the chemical characterization of fly and bottom ashes generated in the combustion process.Petrographic characterization was carried out through maceral analysis and vitrinite reflectance measurements. Chemical characterization included proximate analysis, determination of calorific value and sulphur content, ultimate analysis, X-ray diffraction, X-ray fluorescence, Inductively Coupled Plasma — Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma — Atomic Emission Spectrometry (ICP-AES) analysis, and determination of Total Organic Carbon (TOC) content.Vitrinite reflectance analyses indicate a high volatile B/C bituminous coal (0.61 to 0.73% Rrandom). Maceral analyses show predominance of the vitrinite maceral group (51.6 to 70.9 vol.%, m.m.f). Except of the Run of mine (ROM) coal sample, the average calorific value of the coals is 5205 kcal/kg and ash yields range from 21.4 to 38.1 wt.%. The mineralogical composition (X-ray diffraction) of coals includes kaolinite, quartz, plagioclase and pyrite, whereas fly and bottom ashes are composed by mullite, ettringite, quartz, magnetite, and hematite. Analyses of major elements from coal, fly and bottom ashes indicate a high SiO₂, Al₂O₃, and Fe₂O₃ content. Trace elements analysis of in-situ and ROM coals by ICP-MS and ICP-AES show highest concentration in Zn and As. Most of the toxic elements such as As, Cd, Cr, Mo, Ni, Pb, and Zn are significantly reduced by coal beneficiation. Considering the spatial distribution of trace elements in the beneficiated coal samples, which were collected over a period of three months, there appears to be little variation in Cd and Zn concentrations, whereas trace elements such as As, Mo, and Pb show a larger variation.In the fly and bottom ashes, the highest concentrations of trace elements were determined for Zn and As. When compared with trace element concentrations in the feed coal, fly ashes show a significant enrichment in most trace elements (As, B, Be, Cd, Co, Cr, Cu, Li, Mn, Mo, Ni, Pb, Sb, Tl, and Zn), suggesting a predominantly volatile nature for these elements. In contrast, Sn is distributed evenly within the different ash types, whereas U shows depleted concentration in both bottom and fly ash samples.According to the International Classification of in-seam coals the Cambuí coals are of para/ortho bituminous rank of low grade (except for the ROM sample), and are characterized by the predominance of vitrinite macerals.     

煤层显微煤岩类型与裂隙分布的关系

综合利用显微地层学和统计学方法,以河东煤田中北部8^#煤层为例,研究了煤层显微煤岩类型与煤层裂隙分布的关系。结果表明,裂隙在不同显微煤岩类型煤体中的分布存在较大的差异,同时裂隙分布的位置与显微煤岩类型的组合序列有关。其结果对煤层气资源评价和煤层渗透性预测具有重要的指导意义。     

Properties of thermally metamorphosed coal from Tanjung Enim Area, South Sumatra Basin, Indonesia with special reference to the coalification path of macerals

Thermally metamorphosed Tertiary age coals from Tanjung Enim in South Sumatra Basin have been investigated by means of petrographic, mineralogical and chemical analyses. These coals were influenced by heat from an andesitic igneous intrusion. The original coal outside the metamorphosed zone is characterized by high moisture content (4.13–11.25 wt.%) and volatile matter content (> 40 wt.%, daf), as well as less than 80 wt.% (daf) carbon and low vitrinite reflectance (VR_max = 0.52–0.76%). Those coals are of subbituminous and high volatile bituminous rank. In contrast the thermally metamorphosed coals are of medium-volatile bituminous to meta-anthracite rank and characterized by low moisture content (only < 3 wt.%) and volatile matter content (< 24 wt.%, daf), as well as high carbon content (> 80 wt.%, daf) and vitrinite reflectance (VR_max = 1.87–6.20%). All the studied coals have a low mineral matter content, except for those which are highly metamorphosed, due to the formation of new minerals.The coalification path of each maceral shows that vitrinite, liptinite and inertinite reflectance converge in a transition zone at VR_max of around 1.5%. Significant decrease of volatile matter occurs in the zone between 0.5% and 2.0% VR_max. A sharp bend occurs at VR_max between 2.0% and 2.5%. Above 2.5%, the volatile matter decreases only very slightly. Between VR_r = 0.5% and 2.0%, the carbon content of the coals is ascending drastically. Above 2.5% VR_r, the carbon content becomes relatively stable (around 95 wt.%, daf).Vitrinite is the most abundant maceral in low rank coal (69.6–86.2 vol.%). Liptinite and inertinite are minor constituents. In the high rank coal, the thermally altered vitrinite composes 82.4–93.8 vol.%. Mosaic structures can be recognized as groundmasss and crack fillings. The most common minerals found are carbonates, pyrite or marcasite and clay minerals. The latter consist of kaolinite in low rank coal and illite and rectorite in high rank coal. Change of functional groups with rank increase is reflected most of all by the increase of the ratio of aromatic C–H to aliphatic C–H absorbances based on FTIR analysis. The Oxygen Index values of all studied coals are low (OI < 5 mg CO₂/g TOC) and the high rank coals have a lower Hydrogen Index (< 130 mg HC/g TOC) than the low rank coals (about 300 mg HC/g TOC). T_max increases with maturity (420–440 °C for low rank coals and 475–551 °C for high rank coals).Based on the above data, it was calculated that the temperature of contact metamorphism reached 700–750 °C in the most metamorphosed coal.     

Mineralogy and geochemistry of boehmite-rich coals: New insights from the Haerwusu Surface Mine, Jungar Coalfield, Inner Mongolia, China

Boehmite-rich coal of Pennsylvanian age was discovered earlier at the Heidaigou Surface Mine, Jungar Coalfield, Inner Mongolia, China. This paper reports new results on 29 bench samples of the no. 6 coal from a drill core from the adjacent Haerwusu Surface Mine, and provides new insights into the origin of the minerals and elements present. The results show that the proportion of inertinite in the no. 6 coal is higher than in other Late Paleozoic coals in northern China. Based on mineral proportions (boehmite to kaolinite ratio) and major element concentrations in the coal benches of the drill core, the no. 6 coal may be divided into five sections (I to V). Major minerals in Sections I and V are kaolinite. Sections II and IV are mainly kaolinite with a trace of boehmite, and Section III is high in boehmite. The boehmite is derived from bauxite in the weathered surface (Benxi Formation) in the sediment-source region. The no. 6 coal is rich in Al₂O₃ (8.89%), TiO₂ (0.47%), Li (116 μg/g), F (286 μg/g), Ga (18 μg/g), Se (6.1 μg/g), Sr (350 μg/g), Zr (268 μg/g), REEs (172 μg/g), Pb (30 μg/g), and Th (17 μg/g). The elements are classified into five associations by cluster analysis, i.e. Groups A, B, C, D, and E. Group A (ash–SiO₂–Al₂O₃–Na₂O–Li) and Group B (REE–Sc–In–Y–K₂O–Rb–Zr–Hf–Cs–U–P₂O₅–Sr–Ba–Ge) are strongly correlated with ash yield and mainly have an inorganic affinity. The elements that are negatively or less strongly correlated with ash yield (with exceptions of Fe₂O₃, Be, V, and Ni) are grouped in the remaining three associations: Group C, Se–Pb–Hg–Th–TiO₂–Bi–Nb–Ta–Cd–Sn; Group D, Co–Mo–Tl–Be–Ni–Sb–MgO–Re–Ga–W–Zn–V–Cr–F–Cu; and Group E, S–As–CaO–MnO–Fe₂O₃. Aluminum is mainly distributed in boehmite, followed by kaolinite. The high correlation coefficients of the Li–ash, Li–Al₂O₃, and Li–SiO₂ pairs indicate that Li is related to the aluminosilicates in the coal. The boehmite-rich coal is high in gallium and F, which occur in boehmite and the organic matter. Selenium and Pb are mainly in epigenetic clausthalite fillings in fractures. The abundant rare earth elements in the coal benches were supplied from two sources: the bauxite on the weathered surface of the Benxi Formation and from adjacent partings by groundwater leaching during diagenesis. The light rare earth elements (LREEs) are more easily leached from the partings and incorporated into the organic matter than the heavy REEs, leading to a higher ratio of LREEs to HREEs in the coal benches than in the overlying partings.     

Evolution of optical properties of vitrinite, sporinite and semifusinite in response to heating under inert conditions

The objective of the study was to characterize changes of reflectance, reflectance anisotropy and reflectance indicating surface (RIS) shape of vitrinite, sporinite and semifusinite subjected to thermal treatment under inert conditions. Examination was performed on vitrinite, liptinite and inertinite concentrates prepared from channel samples of steam coal (R_r = 0.70%) and coking coal (R_r = 1.25%), collected from seam 405 of the Upper Silesian Coal Basin. The concentrates were heated at temperatures of 400–1200 °C for 1 h time in an argon atmosphere.All components examined in this study: vitrinite, sporinite and semifusinite as well as matrix of vitrinite and liptinite cokes, despite of rank of their parent coal, show, in general, the most important changes of reflectance value and optical anisotropy when heated at 500 °C, 800 °C (with the exception of bireflectance value of sporinite) and 1200 °C.After heating the steam coal at 1200 °C, the vitrinite and the semifusinite reveal similar reflectances, whereas the latter a slightly stronger anisotropy. Sporinite and matrix of liptinite coke have lower reflectances but anisotropy (R_bi and R_am values) similar to those observed for vitrinite and semifusinite. However, at 1000 °C sporinite and matrix of liptinite coke have the highest reflectivity of the studied components. The RIS at 1200 °C is the same for all components.The optical properties of the three macerals in the coking coal become similar after heating at 1000 °C. Coke obtained at 1200 °C did not contain distinguishable vitrinite grains. At 1200 °C semifusinite and vitrinite coke matrix have highest R_r values among the examined components. Maximum reflectance (R_max) reach similar values for vitrinite and sporinite, slightly lower for semifusinite. Matrix of liptinite coke and matrix of vitrinite coke have considerably stronger anisotropy (R_bi and R_am values) than other components. RIS at 1200 °C is also similar for all components.