共查询到20条相似文献,搜索用时 15 毫秒
1.
The solution describing the wellbore flow rate in a constant‐head test integrated with an optimization approach is commonly used to analyze observed wellbore flow‐rate data for estimating the hydrogeological parameters of low‐permeability aquifers. To our knowledge, the wellbore flow‐rate solution for the constant‐head test in a two‐zone finite‐extent confined aquifer has never been reported so far in the literature. This article is first to develop a mathematical model for describing the head distribution in the two‐zone aquifer. The Laplace domain solutions for the head distributions and wellbore flow rate in a two‐zone finite confined aquifer are derived using the Laplace transform, and their corresponding time domain solutions are then obtained using the Bromwich integral method and residue theorem. These new solutions are expressed in terms of an infinite series with Bessel functions and not straightforward to calculate numerically. A large‐time solution for the wellbore flow rate is therefore developed by employing the relationship of small Laplace variable versus large time variable and L'Hospital's rule. The result shows that the large‐time solution is identical to the steady‐state solution obtained after applying the Tauberian theorem into the Laplace domain solution. This large‐time solution can reduce to the Thiem equation in the case of no skin. Finally, the newly developed solution is used to investigate the effects of outer boundary distance and conductivity ratio on the wellbore flow rate. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
2.
Vectorized simulation of groundwater flow and contaminant transport using analytic element method and random walk particle tracking
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Groundwater contaminant transport processes are usually simulated by the finite difference (FDM) or finite element methods (FEM). However, they are susceptible to numerical dispersion for advection‐dominated transport. In this study, a numerical dispersion‐free coupled flow and transport model is developed by combining the analytic element method (AEM) with random walk particle tracking (RWPT). As AEM produces continuous velocity distribution over the entire aquifer domain, it is more suitable for RWPT than FDM/finite element methods. Using the AEM solutions, RWPT tracks all the particles in a vectorized manner, thereby improving the computational efficiency. The present model performs a convolution integral of the response of an impulse contaminant injection to generate concentration distributions due to a permanent contaminant source. The RWPT model is validated with an available analytical solution and compared to an FDM solution, the RWPT model more accurately replicates the analytical solution. Further, the coupled AEM‐RWPT model has been applied to simulate the flow and transport in hypothetical and field aquifer problems. The results are compared with the FDM solutions and found to be satisfactory. The results demonstrate the efficacy of the proposed method. 相似文献
3.
Underdamped slug tests with unsaturated‐saturated flows by considering effects of wellbore skins
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
An analytical solution is presented for the slug tests conducted in a partially penetrating well in an unconfined aquifer affected from above by an unsaturated zone. The solution considers the effects of wellbore skin and oscillatory responses on underdamped slug tests. The flow in the saturated zone is described by a two‐dimensional, axially symmetric governing equation, and the flow in the unsaturated zone above the water table by a linearized one‐dimensional Richards' equation. The unsaturated medium properties are represented by the exponential constitutive relationships. A Laplace domain solution is derived using the Laplace and finite Fourier transform and the solution in the real‐time domain is evaluated using the numerical inverse Laplace transform method. The solution derived in this study is more general and reduces to the most commonly used solutions for slug tests in their specified conditions. It is found that the unsaturated flow has a significant impact on the slug test conducted in an unconfined aquifer. The impact of unsaturated flow on such a slug test is enhanced with a larger anisotropy ratio, a shorter well screen length, a shorter distance between the well screen and the water table, or a larger well screen radius. The impact of unsaturated flow on slug tests decreases as the degree of penetration (the length of well screen) increases. For a fixed well screen length, the impact of unsaturated flow on slug tests decreases as the distance between the centre of screen and the water table increases. A large dimensionless well screen radius (>0.01) leads to significant effects of unsaturated flow on slug tests. The unsaturated flow reduces the oscillatory responses to underdamped slug tests. The unsaturated zone has significant impact on slug test under high‐permeability wellbore skin. 相似文献
4.
David Ching‐Fang Shih 《水文研究》2007,21(16):2135-2143
A semi‐analytical solution of the one‐dimensional transport for considering a three‐member decay chain in a single fracture with pulse and Heaviside input sources has been studied using the Laplace transform and its numerical inversion. The results reveal that breakthrough curves of dimensionless concentration for the decay chain of Np‐237, U‐233, and Th‐229 in the fracture can be well demonstrated in the temporal and spatial domains. The conditions with and without retardation effects are also compared. During the preliminary screening phase the solutions are suitable for performance assessment on radioactive waste disposal sites under a one‐dimensional single fracture condition. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
5.
It has been known for many years that dispersivity increases with solute travel distance in a subsurface environment. The increase of dispersivity with solute travel distance results from the significant variation of hydraulic properties of heterogeneous media and was identified in the literature as scale-dependent dispersion. This study presents an analytical solution for describing two-dimensional non-axisymmetrical solute transport in a radially convergent flow tracer test with scale-dependent dispersion. The power series technique coupling with the Laplace and finite Fourier cosine transform has been applied to yield the analytical solution to the two-dimensional, scale-dependent advection–dispersion equation in cylindrical coordinates with variable-dependent coefficients. Comparison between the breakthrough curves of the power series solution and the numerical solutions shows excellent agreement at different observation points and for various ranges of scale-related transport parameters of interest. The developed power series solution facilitates fast prediction of the breakthrough curves at any observation point. 相似文献
6.
As is frequently cited, dispersivity increases with solute travel distance in the subsurface. This behaviour has been attributed to the inherent spatial variation of the pore water velocity in geological porous media. Analytically solving the advection–dispersion equation with distance-dependent dispersivity is extremely difficult because the governing equation coefficients are dependent upon the distance variable. This study presents an analytical technique to solve a two-dimensional (2D) advection–dispersion equation with linear distance-dependent longitudinal and transverse dispersivities for describing solute transport in a uniform flow field. The analytical approach is developed by applying the extended power series method coupled with the Laplace and finite Fourier cosine transforms. The developed solution is then compared to the corresponding numerical solution to assess its accuracy and robustness. The results demonstrate that the breakthrough curves at different spatial locations obtained from the power series solution show good agreement with those obtained from the numerical solution. However, owing to the limited numerical operation for large values of the power series functions, the developed analytical solution can only be numerically evaluated when the values of longitudinal dispersivity/distance ratio eL exceed 0·075. Moreover, breakthrough curves obtained from the distance-dependent solution are compared with those from the constant dispersivity solution to investigate the relationship between the transport parameters. Our numerical experiments demonstrate that a previously derived relationship is invalid for large eL values. The analytical power series solution derived in this study is efficient and can be a useful tool for future studies in the field of 2D and distance-dependent dispersive transport. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
7.
We have investigated non‐Darcian flow to a vertical fracture represented as an extended well using a linearization procedure and a finite difference method in this study. Approximate analytical solutions have been obtained with and without the consideration of fracture storage based on the linearization procedure. A numerical solution for such a non‐Darcian flow case has also been obtained with a finite difference method. We have compared the numerical solution with the approximate analytical solutions obtained by the linearization method and the Boltzmann transform. The results indicate that the linearized solution agrees generally well with the numerical solution at late times, and underestimates the dimensionless drawdown at early times, no matter if the fracture storage is considered or not. When the fracture storage is excluded, the Boltzmann transform solution overestimates the dimensionless drawdown during the entire pumping period. The dimensionless drawdowns in the fracture with fracture storage for different values of dimensionless non‐Darcian hydraulic conductivity β approach the same asymptotic value at early times. A larger β value results in a smaller dimensionless drawdown in both the fracture and the aquifer when the fracture storage is included. The dimensionless drawdown is approximately proportional to the square root of the dimensionless time at late times. 相似文献
8.
Jui-Sheng Chen Yiu-Hsuan LiuChing-Ping Liang Chen-Wuing LiuChien-Wen Lin 《Advances in water resources》2011,34(3):365-374
Exact analytical solutions for two-dimensional advection-dispersion equation (ADE) in cylindrical coordinates subject to the third-type inlet boundary condition are presented in this study. The finite Hankel transform technique in combination with the Laplace transform method is adopted to solve the two-dimensional ADE in cylindrical coordinates. Solutions are derived for both continuous input and instantaneous slug input. The developed analytical solutions are compared with the solutions for first-type inlet boundary condition to illustrate the influence of the inlet condition on the two-dimensional solute transport in a porous medium system with a radial geometry. Results show significant discrepancies between the breakthrough curves obtained from analytical solutions for the first-type and third-type inlet boundary conditions for large longitudinal dispersion coefficients. The developed solutions conserve the solute mass and are efficient tools for simultaneous determination of the longitudinal and transverse dispersion coefficients from a laboratory-scale radial column experiment or an in situ infiltration test with a tracer. 相似文献
9.
Erick Carlier 《水文研究》2008,22(17):3500-3506
An analytical transport‐model was developed to simulate the propagation of a contaminant in one‐ and two‐dimensional transient flow in groundwater. It is proved that the distribution of concentration at a given time and for a given discharge is identical to that obtained for a different discharge if the volumetric flux of water is the same in the two cases. The results of simulations have been compared with results obtained using the MT3DMS numerical model. There is good agreement when the calculated concentrations are flux‐weighted concentrations. On the other hand, there is a notable divergence when the resident mode is considered. Resident mode concentrations express the mass per unit volume whereas flux mode concentrations express the ratio of mass flux to fluid flux. The solutions presented in this paper can thus be a useful alternative to code MT3DMS when the objective is to simulate concentrations in transient flow according to a resident mode. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
10.
A two‐dimensional semi‐analytical solution to analyse stream–aquifer interactions in a coastal aquifer where groundwater level responds to tidal effects is presented. The conceptual model considered is a two‐dimensional subsurface system with stream and coastline boundaries at right angles. The dimensional and non‐dimensional boundary value problems were solved for water level in the aquifer by successive application of Laplace and Fourier transform techniques, and the results were obtained by numerical inversion of the transformed solution. The solution was then verified by reducing the solutions to one‐dimensional known problems and comparing the results with those from previous studies. Hypothetical examples were used to examine the characteristics of water‐level variations due to the variations in stream stage and the fluctuations in tide level. Sensitivity analysis indicated that streambed leakance has no influence over the amplitude of groundwater fluctuations, but that the effect of stream stage increases with increasing leakance. Little difference was observed in the water level for different aquifer penetration ratios with narrow stream width. Increases in streambed leakance caused increases in the effect of aquifer penetration by the stream on the water level. An increased specific yield value resulted in decreased amplitude of water fluctuations and mean water level, and showed that water‐level variations due to stream and tidal boundaries are sensitive to specific yield. Copyright © 2006 John Wiley & Sons, Ltd. 相似文献
11.
12.
Simple closed‐form approximations are presented for calculating the steady‐state groundwater age distribution in two‐dimensional vertical cross sections of idealized fresh water lenses overlying salt water, for aquifers that are vertically semi‐infinite and of finite thickness. The approximations are developed on the basis of existing one‐dimensional analytical solutions for travel‐time calculation in fresh water lenses and approximate streamline formulations. The two‐dimensional age distributions based on the closed‐form solutions match convincingly with numerical simulations. As expected, notable deviations from the numerical solution are encountered at the groundwater flow divide and when submarine groundwater discharge occurs. Ratios of recharge over hydraulic conductivities are varied to explore how the magnitude of the deviations changes, and it is found that the approximate closed‐form solutions perform well over a range of conditions found in natural systems. 相似文献
13.
Stephen P. Garabedian 《Ground water》2013,51(6):927-934
A new steady‐state analytical solution to the two‐dimensional radial‐flow equation was developed for drawdown (head) conditions in an aquifer with constant transmissivity, no‐flow conditions at the top and bottom, constant head conditions at a known radial distance, and a partially completed pumping well. The solution was evaluated for accuracy by comparison to numerical simulations using MODFLOW. The solution was then used to estimate the rise of the salt water‐fresh water interface (upconing) that occurs under a pumping well, and to calculate the critical pumping rate at which the interface becomes unstable, allowing salt water to enter the pumping well. The analysis of salt water‐fresh water interface rise assumed no significant effect on upconing by recharge; this assumption was tested and supported using results from a new steady‐state analytical solution developed for recharge under two‐dimensional radial‐flow conditions. The upconing analysis results were evaluated for accuracy by comparison to those from numerical simulations using SEAWAT for salt water‐fresh water interface positions under mild pumping conditions. The results from the equation were also compared with those of a published numerical sharp‐interface model applied to a case on Cape Cod, Massachusetts. This comparison indicates that estimating the interface rise and maximum allowable pumping rate using the analytical method will likely be less conservative than the maximum allowable pumping rate and maximum stable interface rise from a numerical sharp‐interface model. 相似文献
14.
Three‐dimensional controlled‐source electromagnetic modelling with a well casing as a grounded source: a hybrid method of moments and finite element scheme
下载免费PDF全文
![点击此处可从《Geophysical Prospecting》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Steel well casings in or near a hydrocarbon reservoir can be used as source electrodes in time‐lapse monitoring using grounded line electromagnetic methods. A requisite component of carrying out such monitoring is the capability to numerically model the electromagnetic response of a set of source electrodes of finite length. We present a modelling algorithm using the finite‐element method for calculating the electromagnetic response of a three‐dimensional conductivity model excited using a vertical steel‐cased borehole as a source. The method is based on a combination of the method of moments and the Coulomb‐gauged primary–secondary potential formulation. Using the method of moments, we obtain the primary field in a half‐space due to an energized vertical steel casing by dividing the casing into a set of segments, each assumed to carry a piecewise constant alternating current density. The primary field is then substituted into the primary–secondary potential finite‐element formulation of the three‐dimensional problem to obtain the secondary field. To validate the algorithm, we compare our numerical results with: (i) the analytical solution for an infinite length casing in a whole space, excited by a line source, and (ii) a three‐layered Earth model without a casing. The agreement between the numerical and analytical solutions demonstrates the effectiveness of our algorithm. As an illustration, we also present the time‐lapse electromagnetic response of a synthetic model representing a gas reservoir undergoing water flooding. 相似文献
15.
Existing analytical solutions to 2D and 3D contaminant transport problems are limited by the mathematically convenient assumption of uniform flow. An approximate method is developed herein for coordinate mapping of 2D (vertically-averaged) transport solutions to non-uniform steady-state irrotational and divergence-free flow fields in single-layer aquifers. The method enables existing analytical transport solutions to be applied to aquifer systems with wells, non-uniform saturated thickness, surface water features, and (to a limited degree) heterogeneous hydraulic conductivity and recharge. This mass-conservative coordinate mapping approach is inexact in its approximation of the dispersion process but is still sufficiently accurate for many simple flow systems. The degree of model error is directly proportional to the variation of velocity magnitude within the domain. These mapped analytical solutions are compared to numerical simulation results and the coordinate mapping errors are investigated. The methods described herein may be used in the traditional capacity of analytical transport models, i.e., screening and preliminary site assessment, without sacrificing accuracy by assuming locally uniform flow conditions or applying an ad-hoc coordinate transformation. The solutions benefit from the traditional advantages of analytical methods, particularly the removal of artifacts due to spatial and temporal discretization: no time-stepping or numerical discretization is required. 相似文献
16.
Time–space fractional governing equations of one‐dimensional unsteady open channel flow process: Numerical solution and exploration
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Although fractional integration and differentiation have found many applications in various fields of science, such as physics, finance, bioengineering, continuum mechanics, and hydrology, their engineering applications, especially in the field of fluid flow processes, are rather limited. In this study, a finite difference numerical approach is proposed to solve the time–space fractional governing equations of 1‐dimensional unsteady/non‐uniform open channel flow process. By numerical simulations, results of the proposed fractional governing equations of the open channel flow process were compared with those of the standard Saint‐Venant equations. Numerical simulations showed that flow discharge and water depth can exhibit heavier tails in downstream locations as space and time fractional derivative powers decrease from 1. The fractional governing equations under consideration are generalizations of the well‐known Saint‐Venant equations, which are written in the integer differentiation framework. The new governing equations in the fractional‐order differentiation framework have the capability of modelling nonlocal flow processes both in time and in space by taking the global correlations into consideration. Furthermore, the generalized flow process may possibly shed light on understanding the theory of the anomalous transport processes and observed heavy‐tailed distributions of particle displacements in transport processes. 相似文献
17.
《Advances in water resources》1999,22(5):507-519
Three-dimensional analytical solutions for solute transport in saturated, homogeneous porous media are developed. The models account for three-dimensional dispersion in a uniform flow field, first-order decay of aqueous phase and sorbed solutes with different decay rates, and nonequilibrium solute sorption onto the solid matrix of the porous formation. The governing solute transport equations are solved analytically by employing Laplace, Fourier and finite Fourier cosine transform techniques. Porous media with either semi-infinite or finite thickness are considered. Furthermore, continuous as well as periodic source loadings from either a point or an elliptic source geometry are examined. The effect of aquifer boundary conditions as well as the source geometry on solute transport in subsurface porous formations is investigated. 相似文献
18.
Modelling of the groundwater flow and of tracer movement in the porous and fissured media: Chalk Aquifer (Northern part of Paris Basin,France)
下载免费PDF全文
![点击此处可从《水文研究》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Adel Zghibi Lahcen Zouhri Ismail Chenini Amira Merzougui Jamila Tarhouni 《水文研究》2016,30(12):1916-1928
A groundwater flow model has been developed in order to study the chalk aquifer of Paris Basin, based on most of the geological and hydrological available data. The numerical processes are intended to modelling the groundwater flow in the Senonian (Late Cretaceous) formations and to visualize the tracer movement in groundwater resources in the experimental site of LaSalle Beauvais (northern part Paris Basin). Both objectives were achieved as follows: (i) the comprehension of the spatial distribution of the hydraulic conductivity in the chalk aquifer taking into account the characteristics of the hydrogeological system and (ii) the use of the analytical solution for describing one‐dimensional to two‐dimensional solute transport in a unidirectional steady‐state flow tracer with scale‐dependent dispersion. Advection and diffusion mechanisms are taken into account. Comparison between the breakthrough curves of the analytical and the numerical solutions provided an excellent agreement for various ranges of scale‐related transport parameters of interest. The developed power series solution facilitates fast prediction of the breakthrough curves at each observation point. Thus, the derived new solutions are widely applicable and are very useful for the validation of numerical transport. The numerical approach is carried out by MT3DMS, a Modular 3‐D Multi‐Species Transport Model for Simulation of Advection, Dispersion, and Chemical Reactions of Contaminants in Groundwater Systems, and based on total variation‐diminishing method using the ULTIMATE algorithm. The estimation of the infected surface could constitute an approach in water management and allows to prevent the risks of pollution and to manage the groundwater resource from a durable development perspective. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
19.
Ryan T. Bailey Eric D. Morway Richard G. Niswonger Timothy K. Gates 《Ground water》2013,51(5):752-761
A numerical model was developed that is capable of simulating multispecies reactive solute transport in variably saturated porous media. This model consists of a modified version of the reactive transport model RT3D (Reactive Transport in 3 Dimensions) that is linked to the Unsaturated‐Zone Flow (UZF1) package and MODFLOW. Referred to as UZF‐RT3D, the model is tested against published analytical benchmarks as well as other published contaminant transport models, including HYDRUS‐1D, VS2DT, and SUTRA, and the coupled flow and transport modeling system of CATHY and TRAN3D. Comparisons in one‐dimensional, two‐dimensional, and three‐dimensional variably saturated systems are explored. While several test cases are included to verify the correct implementation of variably saturated transport in UZF‐RT3D, other cases are included to demonstrate the usefulness of the code in terms of model run‐time and handling the reaction kinetics of multiple interacting species in variably saturated subsurface systems. As UZF1 relies on a kinematic‐wave approximation for unsaturated flow that neglects the diffusive terms in Richards equation, UZF‐RT3D can be used for large‐scale aquifer systems for which the UZF1 formulation is reasonable, that is, capillary‐pressure gradients can be neglected and soil parameters can be treated as homogeneous. Decreased model run‐time and the ability to include site‐specific chemical species and chemical reactions make UZF‐RT3D an attractive model for efficient simulation of multispecies reactive transport in variably saturated large‐scale subsurface systems. 相似文献
20.
We have developed a new method to analyze the power law based non-Darcian flow toward a well in a confined aquifer with and without wellbore storage. This method is based on a combination of the linearization approximation of the non-Darcian flow equation and the Laplace transform. Analytical solutions of steady-state and late time drawdowns are obtained. Semi-analytical solutions of the drawdowns at any distance and time are computed by using the Stehfest numerical inverse Laplace transform. The results of this study agree perfectly with previous Theis solution for an infinitesimal well and with the Papadopulos and Cooper’s solution for a finite-diameter well under the special case of Darcian flow. The Boltzmann transform, which is commonly employed for solving non-Darcian flow problems before, is problematic for studying radial non-Darcian flow. Comparison of drawdowns obtained by our proposed method and the Boltzmann transform method suggests that the Boltzmann transform method differs from the linearization method at early and moderate times, and it yields similar results as the linearization method at late times. If the power index n and the quasi hydraulic conductivity k get larger, drawdowns at late times will become less, regardless of the wellbore storage. When n is larger, flow approaches steady state earlier. The drawdown at steady state is approximately proportional to r1−n, where r is the radial distance from the pumping well. The late time drawdown is a superposition of the steady-state solution and a negative time-dependent term that is proportional to t(1−n)/(3−n), where t is the time. 相似文献