Interaction of flexural shear,S–C fabrics,and oblique shear during folding of micaceous quartzite

This paper investigates the geometry, microstructure, and c-axis fabrics of an outcrop scale, micaceous quartzite fold produced under greenschist facies metamorphic conditions in the Moeda quartzite, Quadrilátero Ferrı́fero granite–greenstone terrain, southeastern Brazil. The fold limbs show development of opposed S–C fabrics and asymmetric quartz c-axis fabrics compatible with flexural slip along the fold surface. Towards the fold hinge, there is an increasing presence of oblique shear bands (here named S-bands) which gradually change to crenulations within the hinge zone. The oblique S-bands are interpreted to have formed through connection of several S-planes, increasing accommodation of antithetical shear along these S-planes and offset of the initial C-planes at intermediate stages of folding. This mechanism represents a kinematic inversion in the role played by the two sets of foliations in S–C structures. Our observations support flexural slip for early stages of folding. However, with progressive closure of the fold, the flexural slip mechanism involves increasing contributions from oblique shear on the S-bands, thus approximating an intermediate situation between flexural slip and passive folding (shear parallel to the axial plane).     

The reliability of asymmetric c-axis fabrics of quartz to determine sense of vorticity

Asymmetric c-axis fabrics of quartz are commonly used to determine sense of vorticity in ductile shear zones. This method seems to work if the fabric pattern resembles a model fabric proposed by Lister and Hobbs (1980). Usually, however, c-axis fabrics are rather vague. The reliability of such vague fabrics was tested in a major shear zone with known sense of vorticity. Only 62% of the c-axis fabrics predict the correct sense. Great care should therefore be taken in applying this method to determine sense of vorticity.     

Coupled micro-faulting and pressure solution creep overprinted on quartz schist deformed by intracrystalline plasticity during exhumation of the Sambagawa metamorphic rocks,southwest Japan

In the Sambagawa schist, southwest Japan, while ductile deformation pervasively occurred at D₁ phase during exhumation, low-angle normal faulting was locally intensive at D₂ phase under the conditions of frictional–viscous transition of quartz (c. 300 °C) during further exhumation into the upper crustal level. Accordingly, the formation of D₂ shear bands was overprinted on type I crossed girdle quartz c-axis fabrics and microstructures formed by intracrystalline plasticity at D₁ phase in some quartz schists. The quartz c-axis fabrics became weak and finally random with increasing shear, accompanied by the decreasing degree of undulation of recrystallized quartz grain boundaries, which resulted from the increasing portion of straight grain boundaries coinciding with the interfaces between newly precipitated quartz and mica. We interpreted these facts as caused by increasing activity of pressure solution: the quartz grains were dissolved mostly at platy quartz–mica interface, and precipitated with random orientation and pinned by mica, thus having led to the obliteration of existing quartz c-axis fabrics. In the sheared quartz schist, the strength became reduced by the enhanced pressure solution creep not only due to the reduction of diffusion path length caused by increasing number of shear bands, but also to enhanced dissolution at the interphase boundaries.     

青海可可西里北缘韧性剪切带的显微构造特征

在可可西里北缘发现的糜棱岩化带,经显微构造研究确定为韧性剪切带。此带发育流劈理及拉伸线理。糜棱岩化花岗岩和糜棱岩化石英脉中的石英发育亚晶粒构造、位错构造和动态重结晶,长石主要发育机械双晶。石英c轴组构属韧性剪切带中的典型形式,石英变形以位错蠕变机制和位错滑移机制共存为特征,石英的动态重结晶作用是由亚晶粒旋转机制形成。长石的变形主要是通过机械双晶实现的。此韧性剪切带形成时的温度约400℃,差异应力约30MPa,应变速率约1.9×10^-13s^-1.     

Fabric development during shear deformation in the Main Central Thrust Zone, NW-Himalaya, India

Quartz microfabrics and associated microstructures have been studied on a crustal shear zone—the Main Central Thrust (MCT) of the Himalaya. Sampling has been done along six traverses across the MCT zone in the Kumaun and Garhwal sectors of the Indian Himalaya. The MCT is a moderately north-dipping shear zone formed as a result of the southward emplacement of a part of the deeply rooted crust (that now constitutes the Central Crystalline Zone of the Higher Himalaya) over the less metamorphosed sedimentary belt of the Lesser Himalaya. On the basis of quartz c- and a-axis fabric patterns, supported by the relevant microstructures within the MCT zone, two major kinematic domains have been distinguished. A noncoaxial deformation domain is indicated by the intensely deformed rocks in the vicinity of the MCT plane. This domain includes ductilely deformed and fine-grained mylonitic rocks which contain a strong stretching lineation and are composed of low-grade mineral assemblages (muscovite, chlorite and quartz). These rocks are characterized by highly asymmetric structures/microstructures and quartz c- and a-axis fabrics that indicate a top-to-the-south sense that is compatible with south-directed thrusting for the MCT zone. An apparently coaxial deformation domain, on the other hand, is indicated by the rocks occurring in a rather narrow belt fringing, and structurally above, the noncoaxial deformation domain. The rocks are highly feldspathic and coarse-grained gneisses and do not possess any common lineation trend and the effects of simple shear deformation are weak. The quartz c-axis fabrics are symmetrical with respect to foliation and lineation. Moreover, these rocks contain conjugate and mutually interfering shear bands, feldspar/quartz porphyroclasts with long axes parallel to the macrosopic foliation and the related structures/microstructures, suggesting deformation under an approximate coaxial strain path.On moving towards the MCT, the quartz c- and a-axis fabrics become progressively stronger. The c-axis fabric gradually changes from random to orthorhombic and then to monoclinic. In addition, the coaxial strain path gradually changes to the noncoaxial strain path. All this progressive evolution of quartz fabrics suggests more activation of the basal, rhomb and a slip systems at all structural levels across the MCT.     

Quartz c-axis fabric development and large-scale post-nappe folding (Wandfluhhorn Fold,Penninic nappes)

Quartz c-axis fabrics have been investigated within a suite of quartz veins and monomineralic layers around a major post-nappe fold hinge (the Wandfluhhorn Fold) in the Bosco area (Swiss-Italian border) within the lower Penninic nappes.Two kinematic domains which are separated by the axial plane trace of the Wandfluhhorn Fold are recognized; on the lower limb the measured quartz c-axis fabric asymmetry indicates a sense of shear in which the overlying layers move to the southwest (i.e. top-to-SW) whereas on the upper limb the shear sense is reversed with the top moving to northeast. The shear direction (N60°E–N80°E), however, is constant in both areas and oblique to an older stretching lineation as well as to the D₃ fold hinge. Such a distribution of asymmetric quartz c-axis fabrics and the constant orientation of their interpreted shear direction, which is apparent only from the fabric data and not from field evidence, indicates fabric development pre- or early syn-Wandfluhhorn folding, with subsequent folding and modification of the existing textures and possibly rotation of the initial fold axis.An overall westward-directed shear has been suggested for the whole of the Lepontine Alps. However, this study demonstrates that this simple general pattern has been modified locally by later folding. It also demonstrates that the dominant lineation may be a finite stretching lineation due to more than one phase of deformation and is not necessarily related to any particular transport direction.     

Thermomechanics of an extensional shear zone,Raft River metamorphic core complex,NW Utah

A detailed structural and microstructural analysis of the Miocene Raft River detachment shear zone (NW Utah) provides insight into the thermomechanical evolution of the continental crust during extension associated with the exhumation of metamorphic core complexes. Combined microstructural, electron backscattered diffraction, strain, and vorticity analysis of the very well exposed quartzite mylonite show an increase in intensity of the rock fabrics from west to east, along the transport direction, compatible with observed finite strain markers and a model of ``necking'' of the shear zone. Microstructural evidence (quartz microstructures and deformation lamellae) suggests that the detachment shear zone evolved at its peak strength, close to the dislocation creep/exponential creep transition, where meteoric fluids played an important role on strain hardening, embrittlement, and eventually seismic failure.Empirically calibrated paleopiezometers based on quartz recrystallized grain size and deformation lamellae spacing show very similar results, indicate that the shear zone developed under stress ranging from 40 MPa to 60 MPa. Using a quartzite dislocation creep flow law we further estimate that the detachment shear zone quartzite mylonite developed at a strain rates between 10⁻¹² and 10⁻¹⁴ s⁻¹. We suggest that a compressed geothermal gradient across this detachment, which was produced by a combination of ductile shearing, heat advection, and cooling by meteoric fluids, may have triggered mechanical instabilities and strongly influenced the rheology of the detachment shear zone.     

Strain path partitioning within thrust sheets: microstructural and petrofabric evidence from the Moine Thrust zone at Loch Eriboll,northwest Scotland

Quartz c axis fabrics and microstructures have been investigated within a suite of quartzites collected from the Loch Eriboll area of the Moine Thrust zone and are used to interpret the detailed processes involved in fabric evolution. The intensity of quartz c axis fabrics is directly proportional to the calculated strain magnitude. A correlation is also established between the pattern of c axis fabrics and the calculated strain symmetry.Two kinematic domains are recognized within one of the studied thrust sheets which outcrops immediately beneath the Moine Thrust. Within the upper and central levels of the thrust sheet coaxial deformation is indicated by conjugate, mutually interfering shear bands, globular low strain detrital quartz grains whose c axes are aligned sub-parallel to the principal finite shortening direction (Z) and quartz c axis fabrics which are symmetric (both in terms of skeletal outline and intensity distribution) with respect to mylonitic foliation and lineation. Non-coaxial deformation is indicated within the more intensely deformed and recrystallized quartzites located near the base of the thrust sheet by single sets of shear bands and c axis fabrics which are asymmetric with respect to foliation and lineation.Tectonic models offering possible explanations for the presence of kinematic (strain path) domains within thrust sheets are considered.     

Unusual transition in quartzite dislocation creep regimes and crystal slip systems in the aureole of the Eureka Valley–Joshua Flat–Beer Creek pluton, California: a case for anhydrous conditions created by decarbonation reactions

Microstructures and quartz c-axis fabrics were analyzed in five quartzite samples collected across the eastern aureole of the Eureka Valley–Joshua Flat–Beer Creek composite pluton. Temperatures of deformation are estimated to be 740±50 °C based on a modified c-axis opening angle thermometer of Kruhl (J. Metamorph. Geol. 16 (1998) 142). In quartzite layers located closest (140 m) to the pluton-wall rock contact, flattened detrital grains are plastically deformed and partially recrystallized. The dominant recrystallization process is subgrain rotation (dislocation creep regime 2 of Hirth and Tullis (J. Struct. Geol. 14 (1992) 145)), although grain boundary migration (dislocation creep regime 3) is also evident. Complete recrystallization occurs in quartzite layers located at a distance of 240 m from the contact, and coincides with recrystallization taking place dominantly through grain boundary migration (regime 3). Within the quartzites, strain is calculated to be lowest in the layers closest to the pluton margin based on the aspect ratios of flattened detrital grains.The c-axis fabrics indicate that a slip operated within the quartzites closest to the pluton-wall rock contact and that with distance from the contact the operative slip systems gradually switch to prism [c] slip. The spatial inversion in microstructures and slip systems (apparent “high temperature” deformation and recrystallization further from the pluton-contact and apparent “low temperature” deformation and recrystallization closer to the pluton-contact) coincides with a change in minor phase mineral content of quartzite samples and also in composition of the surrounding rock units. Marble and calc-silicate assemblages dominate close to the pluton-wall rock contact, whereas mixed quartzite and pelite assemblages are dominant further from the contact.We suggest that a thick marble unit located between the pluton and the quartzite layers acted as a barrier to fluids emanating from the pluton. Decarbonation reactions in marble layers interbedded with the inner aureole quartzites and calc-silicate assemblages in the inner aureole quartzites may have produced high X_CO2 (water absent) fluids during deformation. The presence of high X_CO2 fluid is inferred from the prograde assemblage of quartz+calcite (and not wollastonite)+diopside±K-feldspar in the inner aureole quartzites. We suggest that it was these “dry” conditions that suppressed prism [c] slip and regime 3 recrystallization in the inner aureole and resulted in a slip and regime 2 recrystallization, which would normally be associated with lower deformation temperatures. In contrast, the prograde assemblage in the pelite-dominated outer part of the aureole is biotite+K-feldspar. These “wet” pelitic assemblages indicate fluids dominated by water in the outer part of the aureole and promoted prism [c] slip and regime 3 recrystallization. Because other variables could also have caused the spatial inversion of c-axis fabrics and recrystallization mechanisms, we briefly review those variables known to cause a transition in slip systems and dislocation creep regimes in quartz. Our conclusions are based on a small number of samples, and therefore, the unusual development of crystal fabrics and microstructures in the aureole to the EJB pluton suggests that further study is needed on the effect of fluid composition on crystal slip system activity and recrystallization mechanisms in naturally deformed rocks.     

Fabric signature of subglacial till deformation, Breidamerkurjökull, Iceland

The foreland of Breidamerkurjökull, Iceland, is the only locality where tills known to have undergone subglacial deformation are exposed. Till on the foreland has a two-tiered structure, consisting of a dilatant upper horizon c 0.5 m thick and a compact lower till; these horizons correspond to the ductile deforming A horizon and the brittle-ductile B horizon observed below the glacier by G. S. Boulton and co-workers. The relationship between known strain history and a variety of macrofabric elements is examined for these two genetic facies of deformation till. The upper horizon exhibits variable a-axis fabrics and abundant evidence for clast re-alignment, reflecting ductile flow and rapid clast response to transient strains. In contrast, the lower horizon has consistently well organized a-axis fabrics with a narrow range of dip values, recording clast rotation into parallel with strain axes during brittle or brittle-ductile shear. The data indicate that till strain history imparts identifiable macrofabric signatures, providing important analogues to guide the interpretation of Pleistocene tills.     

A natural example of crystal-plastic deformation enhancing the incorporation of water into quartz

Water content of quartz in and around a greenschist facies mylonitic shear zone located in the western Adirondacks was analyzed by micro-FTIR spectroscopy. The shear zone is within a pegmatitic dike, which cuts across a granitic gneiss. The thickness of the shear zone varies along strike from 15 cm wide and encompassing all of the pegmatite dike at its northern most exposure to 5 cm wide approximately 10 m south, along strike. Microstructures, including quartz ribbons and recrystallized grains, indicate quartz and feldspar within the mylonite underwent dislocation creep. Infrared spectral analysis was carried out using a Nicolet micro-FTIR on mylonitic quartz ribbons, pegmatitic quartz and gneissic quartz. A small aperture size (56 μm by 50 μm) for the IR beam allowed optically clear regions of the quartz grains to be analyzed without any contribution from grain boundaries. The smallest dimension of the quartz ribbons is 0.3 mm, whereas the pegmatitic quartz has a grain size of 3 to 5 cm. Results show mylonitic quartz ribbons contain the most water (320 H:10⁶ Si average, range of 50 to 1120 H:10⁶ Si); pegmatite quartz contains much less water (30 H:10⁶ Si average, range of 20–40 H:10⁶ Si) and the gneissic quartz contained an intermediate amount (200 H:10⁶ Si average, range of 20 to 870 H:10⁶ Si). These data indicate that water was preferentially incorporated into the deformed quartz ribbons.     

Quartz <Emphasis Type="Italic">c</Emphasis>-axis texture mapping of mylonitic metapelite with rod structures (Calabria,southern Italy): Clues for hidden shear flow direction

This quantitative microstructural study deals with textures of quartz domains within a mylonitized metapelite collected near a thrust surface corresponding to the tectonic contact between two metamorphic units, which crop out in the Aspromonte Massif, southern Calabria (Italy). The sample investigated lacks a mesoscopic stretching lineation. Therefore, quartz c-axis fabrics were investigated in two mutually orthogonal thin sections (a) parallel to the quartz rod lineation and perpendicular to the foliation (YZ plane) and (b) perpendicular to the quartz rods and perpendicular to the foliation (XZ plane); the data were generated using classical (manual measurements of quartz c-axis using U-stage) and modern methods (Computer Integrated Polarization microscopy). Both these sections show oblique foliations at ca. 40° from the main shear plane, implying that the actual X direction (stretching lineation that is absent on the mesoscopic scale) must lie between these two sections. Quartz c-axis data from the YZ section when rotated by 90° are similar with those from the XZ section. Hence, the data from the two sections are merged. These data when rotated by an angle of 50° from the direction of quartz rod lineation, gives an asymmetrical pattern indicating top-to-the-North sense of shear. This was confirmed by investigating quartz c-axis patterns in a section striking NS and perpendicular to the foliation. Based on the study it is thus concluded that this method can be used to do kinematic analysis in rocks that are devoid of stretching lineations. Apart from the above, the advantages and disadvantages of the classical and modern methods of quartz c-axis analysis are discussed.     

HT-fabrics in a garnet-bearing quartzite from Western Portugal: geodynamic implications for the Iberian Variscan Belt

ABSTRACT The study of a garnet-bearing quartzite from a major suture zone in Iberia reports an unusual high-T fabric. Quartz c -axis patterns were plotted using shaped garnet as reference axis for the finite stretch ( X -axis). The pole figures are characterized by a dominant single maximum around X together with other point maxima along the XY plane (mylonitic foliation). These patterns suggest that dominant < c > prism slip and subordinated < a > prism slip operated during quartz plastic deformation in agreement with P–T conditions for syntectonic garnet growth (4–5 kbar and 700 ± 50 °C) and, pre-dating the well-known (late) Variscan D1 event (<6 kb and 600 ± 30 °C). The geotectonic framework suggests that the fabrics were formed along the western shear margin of the Ossa-Morena Zone during the early stages of the Variscan orogeny.     

Anatomy of the Mondoñedo Nappe basal shear zone (NW Spain)

This paper analyses a major shear zone from the Iberian Hercynian belt which forms the basal thrust of the Mondoñedo Nappe. The shear zone developed by ductile deformation under amphibolite facies metamorphic conditions and later by brittle-ductile deformation in greenschists facies. Folds in the shear zone are asymmetric, very tight, 1C or similar class and frequently developing sheath geometries. The sheath folds originated by non-coaxial flow superimposed on earlier irregularities. The fabric of quartzitic rocks in the shear zone changes from bottom to top from ultramylonites through blastomylonitic rocks to non-mylonitic tectonites. c-axis fabrics vary across the shear zone, but show a dominant monoclinic symmetry. The blastomylonitic rocks include the fabrics representing the highest temperatures. The main foliation of the schists results from flattening of an earlier foliation, recording occasional microfolds. The use of different kinematic criteria has allowed an analysis of their validity as well as an assessment of movement direction towards the foreland of the orogen.     

Progressive development of quartz fabrics in a shear zone from Monte Mucrone,Sesia-Lanzo Zone,Italian Alps

Quartz c-axis fabrics are described from a shear zone in a jadeite — garnet bearing meta-granite from Monte Mucrone, in the Sesia-Lanzo Zone of the western Italian Alps. Quartz blebs in the meta-granitoid are progressively deformed into cigar shaped lenses, and are recrystallized. Fabrics measured from individual blebs show considerable variation resulting from an initial orientation effect, and are not very enlightening. A synoptic diagram, however, has a pole-free area which can be correlated with the extension direction, and an asymmetry which is consistent with the known sense of shear operating in the zone.Although the technique of preparing synoptic diagrams is rather painstaking, its use is advocated for complex fabric situations, as it may allow partial removal of problems associated with non-random initial orientation distributions.     

Relationships between strain and quartz crystallographic fabrics in the Roche Maurice quartzites of Plougastel,western Brittany

An integrated microstructural and petrofabric study of the plastically deformed and partially recrystallized Roche Maurice quartzites of Plougastel, western Brittany, has revealed a clear correlation between the pattern of c-axis fabrics displayed by detrital quartz grains and the symmetry of the calculated strain ellipsoid. In specimens with flattening (k = 0) strains, c axes lie on a small circle girdle (opening angle 28–42°) centred about the principal finite shortening direction (Z). For specimens that exhibit approximate plane strain (k = 1), cross-girdle c-axis fabrics consisting of a small circle girdle centred about Z and connected through the intermediate principal extension direction (Y) were detected.Within individual specimens c-axis fabrics of syntectonically recrystallized new quartz grains within the matrix are similar to those of detrital quartz grains. c axes of new grains located within the relatively undeformed sections of the host detrital grains are commonly orientated at angles between 10 and 40° to the host c axis and are, in addition, statistically orientated at a higher angle to Z than their host c axes. These relationships are interpreted as indicating that both host grain control and the local strain (and/or stress) field may have influenced the process of recrystallization; the relative influence of these factors is, however, unknown.Microstructural and petrofabric studies indicate that the Roche Maurice quartzites have been subjected to essentially coaxial strain histories. The role of syntectonic recrystallization in facilitating continued plastic deformation in quartzites subjected to such strain histories is considered.     

Polyhalite microfabrics in an Alpine evaporite mélange: Hallstatt,Eastern Alps

In the Hallstatt salt mine (Austria), polyhalite rocks occur in 0.5–1 m thick and several metre long tectonic lenses within the protocataclasite to protomylonite matrix of the Alpine Haselgebirge Fm.. Thin section analysis of Hallstatt polyhalites reveals various fabric types similar to metamorphic rocks of crust-forming minerals, e.g. quartz and feldspar. Polyhalite microfabrics from Hallstatt include: (1) polyhalite mylonites, (2) metamorphic reaction fabrics, (3) vein-filling, fibrous polyhalite and (4) cavity-filling polyhalite. The polyhalite mylonites contain a wide range of shear fabrics commonly known in mylonitic quartzo–feldspathic shear zones within the ductile crust and developed from a more coarse-grained precursor rock. The mylonites are partly overprinted by recrystallised, statically grown polyhalite grains. Metamorphic reaction fabrics of polyhalite fibres between blödite (or astrakhanite) [Na₂Mg(SO₄)₂.4H₂O] and anhydrite have also been found. According to previous reports, blödite may occur primarily as nodules or intergrown with löweite. Reaction fabrics may have formed by exsolution, (re-)crystallisation, parallel growth or replacement. This fabric type was only found in one sample in relation with the decomposition of blödite at ca. 61 °C in the presence of halite or slightly above, testifying, therefore, a late stage prograde fabric significantly younger than the main polyhalite formation.     

Comparison of quartz microfabric with strain in recrystallized quartzite

The relationship between quartz c-axis microfabric and strain is examined in six specimens of recrystallized quartzite conglomerate in which strain was measured using pebble shapes. Four rocks subjected to plane strain display a direct relationship between the strength of preferred orientation and the strain intensity. The c-axis distributions in these rocks, as well as a rock subjected to moderate extensional strain, are crossed-girdles with maxima near the intermediate principal strain axis and connecting girdles at acute angles to the direction of maximum shortening. A rock subjected to moderate flattening strain has several maxima clustered near the direction of maximum shortening and a weak connecting girdle through the intermediate principal strain axis.These results are generally similar to those of other studies comparing strain and tectonite fabrics and also with experimental and computer simulation studies of fabrics. The degree of preferred orientation is related to total strain, and therefore microfabrics in quartzites may be cautiously interpreted as qualitative indicators of strain intensity. Uncertainties are greater, however, for correlations of fabric patterns with shapes of the strain ellipsoid. An observed increase in recrystallized grain sizes with increasing strain suggests that flow stress was lower in the more strained rocks.     

Mylonitic microfabrics from the rocks of MCT zone in Alakhnanda valley,Garhwal Himalaya

MCT Zone of Alakhnanda valley is a major ductile shear zone in Garhwal Himalaya, which is characterised by different types of mylonite rocks. On the basis of grain size and the percentage of matrix in the rock, zones comprising protomylonite, augen mylonite, mylonite and ultramylonite have been identified. The study of microstructures, grain size and crystallographic preferred orientation of quartz c-axis fabric reveals that the rocks of the MCT zone were deformed by a combination of intracrystalline creep (power law creep) and grain boundary migration (sliding super plasticity).     

鲁西青邑韧性剪切带运动学涡度及剪切作用类型

青邑韧性剪切带是晚太古代末期发育在鲁西前寒武纪基底花岗岩中一条规模较大的韧性剪切带。剪切带NW走向,面理直立,线理水平,剪切标志反映右行剪切。石英光轴法求得运动学涡度在0．96～0．99之间变化,极摩尔圆法求得糜棱岩化岩石运动学涡度为0．91,初糜棱岩运动学涡度为0．87,糜棱岩运动学涡度为0．81,超糜棱岩运动学涡度为0．60。运动学涡度表明,剪切带剪切作用类型为一般剪切,变形初期以单剪为主,随应变的增大,运动学涡度值逐渐减小,变形的纯剪分量不断增加,最后以纯剪为主。剪切作用类型及三维参照变形分析表明,青邑韧性剪切带属加长一变宽类型的一般剪切带并且在Y轴方向上有所增长。韧性剪切在太古代末期克拉通化过程中具有加厚陆壳的作用。