Multiple Foliations Defined by Different Sillimanite Crystal Habits,Partial Melting and the Late Metamorphic Development of the Cannington Ag-Pb-Zn Deposit,Northeast Australia

A succession of foliations defined by different sillimanite-bearing structural fabrics suggests that the macroscopic, isoclinal synform that dominates the geometry of the Cannington Ag-Pb-Zn deposit, northwest Queensland, Australia formed during D₂. The five foliations in this succession, S₁ to S₅, are defined by aligned sillimanite with habits ranging from individual crystals in S₁ through S₄ to clusters of fibrolite in S₅ in both the matrix and as inclusion trails within garnet and gahnite (Zn-rich spinel) porphyroblasts. S₁, S₃ and S₅ formed as sub-horizontal foliations, whereas S_1a, S₂ and S₄ formed sub-vertically. Foliation intersection/inflexion axes (FIAs) within garnet and gahnite porphyroblasts preserve a succession of trends that shifts from W-E to N-S. This succession indicates that this region experienced N-S followed by W-E bulk crustal shortening. N-S shortening occurred during D₁and D_1a, and W-E shortening occurred from D₂ to D₅. Prismatic and rhombic sillimanite produced during D₁-D₄ accompanied prograde metamorphism to ca. 634 62°C and 4.8 1.3 kbar. The coexistence of fibrous, prismatic and rhombic sillimanite resulted from post peak metamorphic reactivation of the early foliations during D₅. The synformal D₂ fold was intensified during D₄ by W-E bulk shortening. Local partial melting occurred after D₁ in the appropriate bulk rock compositions, based on calculation of P-T pseudosections in the chemical systems KFMASH, KFMASHTO, NCKFMASH and MnNCKFMASH. Zn mineralization related to gahnite growth occurred during D₃ through D₄, and was redistributed by partial melting into structural and rheological sites during D₄ and D₅shearing.     

Regional slaty cleavage formation and fold axis rotation by re-use and reactivation of pre-existing foliations: the Fiery Creek Slate Belt, North Queensland

A deformation history, comprised of six separate deformation events of differing intensity, has affected the rocks of the South Palmer River region of the the Hodgkinson Province, north Queensland. Within this region, a zone of pervasive slaty cleavage, herein termed the Fiery Creek Slate Belt, has developed as a result of the superposition of fabrics formed during several of these events. The most important processes in the formation of this composite cleavage were the re-use and reactivation of the favourably oriented, steep, N-S-trending S₂ foliation by the intense fourth deformation event, D₄. This produced micro-, meso- and macroscopic folds in an originally shallow S₃ foliation, produced during the intervening D₃ deformation, with an axial planar S₂–S₄ foliation. The D₄ stretching lineation, L⁴₄, plunges subvertically to steeply north and indicates that shear during D₄ was oriented steeply north-south. In the Fiery Creek Slate Belt, D₂ fold axes are interpreted to have formed in much shallower orientations than their present moderately N-S-plunging to subvertical orientations. We consider this to be a result of D₄ shear, which caused variable degrees of rotation of D₂ fold axes toward the D₄ stretching lineation due to subparallelism of the bulk shortening directions of the D₂ and D₄ events. Near-total destruction of the pre-D₄ foliations during slaty cleavage formation has produced a misleading impression of a simple deformation history. There is no relationship between metamorphic grade and intensity of slaty cleavage development.     

西藏南冈底斯叶巴火山弧的构造-地层属性及其演化

南冈底斯岩浆岩带出露的一套早—中侏罗世火山-沉积建造经历了多期构造变形,致使这套火山-沉积层序发生了强烈的面理置换,形成了典型的构造-岩石地层。依据造山带地层划分方法将叶巴火山弧厘定为叶巴岩群,并根据内部岩性组合特征和构造变形特征将其进一步划分为邦堆岩组、叶巴岩组、甲玛岩组。运用构造解析原理划分了3期构造变形事件。第一期构造变形为脆-韧性剪切变形,剪切方式为纯剪占优的一般剪切变形,透入性面理S₁普遍置换层理S₀(S₁∥S₀),伴生倾伏向85°~100°陡倾的拉伸线理,运动学指示顶面朝西运动,存在左行和右行两个方向的剪切旋转碎斑共存的现象;EBSD实验结果显示变形的温度≤380 ℃,石英颗粒细粒化明显,重结晶方式为亚颗粒旋转重结晶;⁴⁰Ar-³⁹Ar年代学结果表明该期构造变形时代约为79 Ma,其可能代表新特提斯洋板片低角度(平板式)俯冲引起在弧后挤压背景下形成的挤出构造。第二期构造变形表现为S₁面理发生纵弯褶皱变形形成的轴面劈理S₂,轴面产状倾向北或南,倾角40°~70°,枢纽向西或北西西倾伏;结合区域地质演化特征,认为其可能是在晚白垩世(79~68 Ma)南北向持续的挤压应力条件下,南冈底斯弧后盆地整体向上挤出,引发上地壳缩短、加厚进而导致褶皱作用的发生。第三期主要为浅层次膝折构造和近东西向正断层,最大主压应力方向为铅直向,最小主压应力方向(伸展方向)为近南北向;结合区域构造演化特征,认为该期变形可能代表渐新世末—中新世初期(23.74~21.1 Ma),印度岩石圈或青藏高原岩石圈或两者组合的拆沉作用引起冈底斯岩基隆升(主要动力学机制)和GCT活动并共同作用导致近南北向伸展滑覆事件发生。     

滇西澜沧江构造带中-南段澜沧群变质变形期次及Ar-Ar年代学约束

澜沧群变质变形过程的厘定有助于揭示澜沧江构造带的演化历史.通过对双江-惠民地区出露的中-低绿片岩相变质岩系与高压变质岩系的"构造-变质"双重解析,发现澜沧群变质岩系:（1）以挤压体制下的褶劈理S₂为区域性面理,浅变质岩系中石英脉条带代表的面理S₁与层理S₀产状一致,并在第2期强烈压扁后与S₂近平行;（2）构造样式与变质变形期次在研究区域内基本一致,表现为二叠纪-三叠纪两期次中深构造层次透入性变形为侏罗纪-新生代浅-表层次变形所叠加;（3）高压变质岩记录了两个期次的深层次构造变形,电气石与石榴石变斑晶具有明显的两阶段生长模式,核部（M_1aD_1a）可能代表了峰期榴辉岩相变质作用,边部代表折返过程中的蓝片岩相（M_1bD_1b）阶段.高压变质岩与浅变质岩第2期（M₂D₂）构造层次及变形样式一致,代表折返后的挤压拼贴过程,两者的剪切型褶劈理S₂均指示上盘S向的剪切滑动.结合新生代三江地区发生的近90°块体旋转,恢复第2期为上盘指向E的逆冲剪切作用.通过对幸福变质石英砂岩白云母、小黑江多硅白云母和蓝闪石的40Ar-39Ar定年,以及对前人小黑江蓝闪石40Ar-39Ar年龄的重新解释,共厘定出澜沧群4个构造阶段:（1）高压变质岩第1期晚期（D_1b）蓝片岩相变质作用（~250 Ma）;（2）第2期（M₂D₂）中层次挤压（215~214 Ma）;（3）浅变质岩系第3期早期（D_3a）N-S向纵弯褶皱（111.9~103.7 Ma）与晚期（D_3b）逆冲（~82.28 Ma）;（4）第4期近E-W向纵弯褶皱（新生代,很可能晚于59.18 Ma）.      

Episodic porphyroblast growth in the Fleur de Lys Supergroup, Newfoundland: timing relative to the sequential development of multiple crenulation cleavages

Inclusion trails in garnet and albite porphyroblasts in the Fleur de Lys Supergroup preserve successive generations of microstructures, some of which correlate with equivalent microstructures in the matrix. Microstructure–porphyroblast relationships provide timing constraints on a succession of seven crenulation cleavages (S1–S7) and five stages of porphyroblast growth. Significant destruction and alteration of early fabrics has occurred during the microstructural development of the rock mass. Garnet porphyroblasts grew episodically through four growth stages (G1–G4) and preserve a succession of five fabrics (S1–S5) as inclusion trails. Garnet growth during each of the four growth phases did not occur on all pre-existing porphyroblasts, resulting in contrasting growth histories between individual garnet porphyroblasts from the same outcrop. Albite porphyroblasts grew during a single stage of growth and have overgrown microstructures continuous with the matrix. The garnet and albite porphyroblast inclusion trails record a succession of crenulation cleavages without any rotation of the porphyroblasts relative to other porphyroblasts in the population.
Complex microstructural histories are best resolved by preparing multiple oriented thin sections from a large number of samples of different rock types within the area of study. The succession of matrix foliations must be understood, as it provides the most useful time-frame against which to measure the relative timing of phases of porphyroblast growth. Comparable microstructures must be identified in different porphyroblasts and in the rock matrix.     

Episodic gravitational collapse and migration of the mountain chain during orogenic roll‐on in the Himalayas

An ～W–E belt of maximum bulk horizontal shortening (the orogen core) moved North relative to the overlying crust to form the Himalayan Syntaxes due to roll‐on of this portion of the Indian plate. This displacement occurred below a lengthy succession of gently dipping decollements that formed episodically at a depth of ～30 km along the orogen core due to numerous periods of gravitational collapse and spreading of the overlying ductile crust. Successively developed basal decollements were deformed when continued bulk horizontal shortening of the orogen core below reasserted dominance over the effects of gravitational collapse above causing refolding about steeply dipping axial planes. This resulted in northwards migration of the orogen core above depths of ～30 km causing rocks metamorphosing at depths of ～22 km on the north side of the orogen core to be moved to its south side with no change in depth as roll‐on progressed. Garnet porphyroblasts record this lengthy history of lateral migration across the orogen within their inclusion trails. The ～6.4 kbar average pressures accompanying it were obtained from the Mn, Fe and Ca contents of successive garnet cores. Garnet grew at depths of ～22 km until movement towards the surface initiated on successively developed decollements that accommodated the volume constraints of gravitational collapse and spreading on both sides of the orogen. The speed of extrusional displacement increased the further the rocks migrated from the orogen core developing mylonitic schists around the porphyroblasts. This truncated inclusion trails against all matrix foliations as the porphyroblasts were carried towards the surface. Indeed, these rocks were multiply deformed during at least four distinct periods of deformation after mylonitization began and prior to exposure above the Main Central Thrust (MCT). Three or more sub‐vertical and sub‐horizontal foliations were formed during each of the five changes in FIA trend (foliation inflection/intersection axes in porphyroblasts) preserved in these rocks. The inclusion trail asymmetries and P‐T of garnet core growth accompanying each FIA reveal that the first four changes in FIA trend, which define periods of tectonism about one direction of horizontal bulk shortening (relative plate motion), occurred on the north side of the orogen core. The fifth occurred on the south side of the orogen core and the switch in shear sense on gently dipping foliation planes that resulted from this shift to the south eventually led to the development of the MCT. When magnetic anomaly 22 that formed in the Southern Indian Ocean Ridge is taken into account, these five changes in FIA trend correlate markedly with changes in the motion of India relative to a constant Eurasia from 50 to c. 25 Ma. They reveal that Eurasia moved NNW during FIAs 1, 3 and 4 and SSE during FIA 5 when the shear sense on gently dipping foliations switched to top to the S. They suggest collision of India with Eurasia took place at 50 Ma, immediately prior to the development of FIA 1.     

Porphyroblast inclusion trails: the key to orogenesis

Detailed microstructural analysis of inclusion trails in hundreds of garnet porphyroblasts from rocks where spiral-shaped inclusion trails are common indicates that spiral-shaped trails did not form by rotation of the growing porphyroblasts relative to geographic coordinates. They formed instead by progressive growth by porphyroblasts over several sets of near-orthogonal foliations that successively overprint one another. The orientations of these near-orthogonal foliations are alternately near-vertical and near-horizontal in all porphyroblasts examined. This provides very strong evidence for lack of porphyroblast rotation.
The deformation path recorded by these porphyroblasts indicates that the process of orogenesis involves a multiply repeated two-stage cycle of: (1) crustal shortening and thickening, with the development of a near-vertical foliation with a steep stretching lineation; followed by (2) gravitational instability and collapse of this uplifted pile with the development of a near-horizontal foliation, gravitational spreading, near-coaxial vertical shortening and consequent thrusting on the orogen margins. Correlation of inclusion trail overprinting relationships and asymmetry in porphyroblasts with foliation overprinting relationships observed in the field allows determination of where the rocks studied lie and have moved within an orogen. This information, combined with information about chemical zoning in porphyroblasts, provides details about the structural/metamorphic ( P-T-t ) paths the rocks have followed.
The ductile deformation environment in which a porphyroblast can rotate relative to geographic coordinates during orogenesis is spatially restricted in continental crust to vertical, ductile tear/transcurrent faults across which there is no component of bulk shortening or transpression.     

北喜马拉雅E-W向伸展变形时限:来自藏南错那洞穹隆Ar-Ar年代学证据

特提斯喜马拉雅带以广泛发育近E-W向和近S-N向断裂以及北喜马拉雅片麻岩穹隆带为典型特征.藏南错那洞穹隆位于特提斯喜马拉带的东部,是近两年新发现并厘定的穹隆构造.该穹隆从外向内主要由3部分组成:上部单元（盖层）、中部单元（滑脱系）和下部单元（核部）,其中滑脱系主要由一套强烈变形的片岩、伟晶岩、花岗岩、大理岩和矽卡岩组成,片岩包括含石榴石云母片岩、含石榴石十字石云母片岩、含蓝晶石石榴石十字石片岩、含矽线石蓝晶石石榴石片岩和云母石英片岩.野外构造变形特征表明滑脱系为一条强烈变形的韧性剪切带,发育大量的鞘褶皱、"Z"形揉褶皱和眼球状构造、石榴石的旋转碎斑、S-C组构和压力影构造.错那洞穹隆记录了4期构造变形:第1期由北向南的逆冲挤压构造、第2期由南向北的韧性伸展构造、第3期近E-W向的韧性伸展构造变形和第4期成穹后的脆性垮塌构造.通过对滑脱系中含石榴石云母片岩的白云母进行Ar-Ar同位素测年,获得坪年龄为14.0±0.2 Ma,等时线年龄为13.7±0.5 Ma,二者基本一致,同时微观构造特征显示石英呈亚颗粒旋转重结晶（SGR）,其韧性变形的温度为450~550℃,该变形温度高于白云母的封闭温度.因此,白云母Ar-Ar坪年龄（14.0±0.2 Ma）代表错那洞穹隆近E-W向伸展变形的时间,也即近S-N向桑日-错那裂谷的活动时间.结合构造变形和年代学特征,认为错那洞穹隆是STDS向北伸展拆离的主导机制叠加后期近E-W向韧性伸展活动的结果.      

浙西南遂昌—大柘地区八都岩群印支期变质变形序列

浙西南遂昌-大柘地区八都岩群在印支期变质事件影响下发生变质变形,通过详细野外调查和岩相学研究,可将其划分为3期变质变形序列：S₁变形期,NW向片麻理记录的残留紧闭褶皱,共生矿物组合为石榴子石变斑晶及其内部定向分布的包裹体矿物,石榴子石+黑云母+石英（泥质）和石榴子石+角闪石+斜长石+石英（长英质）;S₂变形期,区域性宽缓褶皱及NE向缓倾透入性片麻理,共生矿物组合为石榴子石变斑晶及定向分布的基质矿物,矽线石+石榴子石+黑云母+石英+斜长石±钾长石（泥质）和石榴子石+钾长石+斜长石+黑云母+石英（长英质）;S₃变形期,NE向陡倾透入性片麻理及韧脆性断裂大部分被花岗斑岩脉填充,共生矿物组合为石榴子石变斑晶及其周围退变矿物,石榴子石+矽线石+堇青石+斜长石+黑云母+石英±钾长石（泥质）和角闪石+斜长石+黑云母+钛铁矿（长英质）。结合前人研究成果,八都岩群印支期变质事件峰期变质程度达到麻粒岩相,显示顺时针近等温降压（ITD）型的p-T演化轨迹,S₁-S₃变质变形反映出从俯冲碰撞到快速折返冷却的演化过程,伴随S₃同期侵位的花岗斑岩锆石U-Pb定年结果,将该演化过程完成时间约束在229.7 Ma,可能是浙西南地区对印支期古特提斯洋域内印支-华南-华北板块之间俯冲-碰撞过程的响应。     

Deformation History of the Kunavaram Complex, Eastern Ghats Belt, India: Implications for Alkaline Magmatism Along the Indo-Antarctica Suture

The Kunavaram alkaline complex is a NE-SW trending elongate body located along a major lineament, the Sileru Shear Zone (SSZ) that is regarded as a Proterozoic suture related to Indo-Antarctica collision. The complex is hosted within migmatitic quartzofeldspathic gneisses, mafic granulites retrogressed to amphibolites, and quartzites. The structural evolution of the country rocks and the alkaline complex are similar. The first phase of deformation, D₁, produces a pervasive segregation banding (S₁) in all rock units within and outside the complex. A second deformation phase D₂ isoclinally folded S₁ along subvertical axial planes with shallow plunging axes. F₂ isoclinal folds are ubiquitous in the country rocks and the eastern extremity of the complex. In the interior of the alkaline body, D₂ strain decreases and S₁ is commonly subhorizontal. While amphibolite to granulite facies conditions prevailed during deformation, post-D₂ annealing textures testify to persisting high grade conditions. In the west, a NNE-SSW trending dextral shear zone with strike-slip sense (D₃) truncates the complex. Within this shear zone, quartzofeldspathic country rocks are plastically deformed, while hornblende-K-feldspar assemblages of the complex are retrogressed to biotite and plagioclase. Warping related to D₃ shears also resulted in fold interference patterns on the subhorizontal S₁ foliation in low D₂ strain domains. Based on its steep dip, north-easterly trend, and non-coaxial nature with dextral strike-slip sense, the D₃ shear zone can be correlated with the SSZ. Since this shear zone, i.e., the SSZ, is not associated with primary igneous fabrics and resulted in solid state deformation of the complex, it cannot be considered as a conduit for alkaline magmatism, but is probably responsible for the post-tectonic disposition of the pluton.     

Tertiary to recent oblique convergence and wrenching of the Central Dinarides: Constraints from a palaeostress study

The late Eocene to Neogene tectonic evolution of the Dinarides is characterised by shortening and orogen-parallel wrenching superposed on the late Cretaceous and Eocene double-vergent orogenic system. The Central Dinarides exposes NW-trending tectonic units, which were transported towards the Adria/Apulian microcontinent during late Cretaceous–Palaeogene times. These units were also affected by subsequent processes of late Palaeogene to Neogene shortening, Neogene extension and subsidence of intramontane sedimentary basins and Pliocene–Quaternary surface uplift and denudation. The intramontane basins likely relate to formation of the Pannonian basin. Major dextral SE-trending strike-slip faults are mostly parallel to boundaries of major tectonic units and suggest dextral orogen-parallel wrenching of the whole Central Dinarides during the Neogene indentation of the Apulian microplate into the Alps and back-arc type extension in the Pannonian basin. These fault systems have been evaluated with the standard palaeostress techniques. We report four palaeostress tensor groups, which are tentatively ordered in a succession from oldest to youngest: (1) Palaeostress tensor group 1 (D₁) of likely late Eocene age indicates E–W shortening accommodated by reverse and strike-slip faults. (2) Palaeostress tensor group 2 (D₂) comprises N/NW-trending dextral and W/WSW-trending sinistral strike-slip faults, as well as WNW-striking reverse faults. These indicate NE–SW contraction and subordinate NW–SE extension related to Oligocene to early Miocene shortening of the Dinaric orogenic wedge. (3) Palaeostress tensor group 3a (D_3a) comprises mainly NW-trending normal faults, which indicate early/middle Miocene NE–SW extension related to syn-rift extension in the Pannonian basin. The subsequent palaeostress tensor group 3b (D_3b) includes NE-trending, SE-dipping normal faults indicating NW–SE extension, which is likely related to further extension in the Pannonian basin. (4) Palaeostress tensor group 4 (D₄) is characterised by mainly NW-trending dextral and NE-trending sinistral strike-slip faults. Together, with some E-trending reverse faults, they indicate roughly N–S shortening and dextral wrenching during late Miocene to Quaternary. This is partly consistent with the present-day kinematics, with motion of the Adriatic microplate constrained by GPS data and earthquake focal mechanisms. The north–north-westward motion and counterclockwise rotation of the Adriatic microplate significantly contribute the shortening and present-day wrenching in the Central Dinarides.     

The development of spiral‐shaped inclusion trails during multiple metamorphism and folding

Three periods of mineral growth and three generations of spiral‐shaped inclusion trails have been distinguished within folded rocks of the Qinling‐Dabie Orogen, China, using the development of three successive and differently trending sets of foliation intersection axes preserved in porphyroblasts (FIAs). This progression is revealed by the consistent relative sequence of changes in FIA trends from the core to rim of garnet porphyroblasts in samples with multiple FIAs. The first and second formed sets of FIAs trend oblique to the axial planes of macroscopic folds that dominate the outcrop pattern in this region. The porphyroblasts containing these FIAs grew prior to the development of the macroscopic folds, yet the FIAs do not change orientation across the fold hinges. The youngest formed FIAs (set 3) lie subparallel to the axial planes of these folds and the porphyroblasts containing these FIAs formed in part as the folds developed. The deformation associated with all three generations of spiral‐shaped inclusion trails in garnet porphyroblasts involved the formation of subhorizontal and subvertical foliations against porphyroblast rims accompanied by periods of garnet growth; pervasive structures have not necessarily formed in the matrix away from the porphyroblasts. The macroscopic folds are heterogeneously strained from limb to limb, doubly plunging and have moderately dipping axial planes. The consistent orientation of Set 1 FIAs indicates that the development of spiral‐shaped inclusion trails in porphyroblasts with FIAs belonging to Set 2 did not involve rotation of the previously formed porphyroblasts. The consistent orientation of Sets 1 and 2 FIAs indicate that the development of spiral‐shaped inclusion trails in porphyroblasts with FIAs belonging to Set 3 did not involve rotation of the previously formed porphyroblasts during folding. This requires a fold mechanism of progressive bulk inhomogeneous shortening and demonstrates that spiral‐shaped inclusion trails can form outside of shear zones.     

The tectono‐metamorphic evolution of the Balcooma Metamorphic Group,north‐eastern Australia: a multidisciplinary approach

The sequential growth of biotite, garnet, staurolite, kyanite, andalusite, cordierite and fibrolitic sillimanite, their microstructural relationships, foliation intersection axes preserved in porphyroblasts (FIAs), geochronology, P–T pseudosection (MnNCKFMASH system) modelling and geothermobarometry provide evidence for a P–T–t–D path that changes from clockwise to anticlockwise with time for the Balcooma Metamorphic Group. Growth of garnet at ～530 °C and 4.6 kbar during the N–S‐shortening event that formed FIA 1 was followed by staurolite, plagioclase and kyanite growth. The inclusions of garnet in staurolite porphyroblasts that formed during the development of FIAs 2 and 3 plus kyanite growth during FIA 3 reflect continuous crustal thickening from c. 443 to 425 Ma during an Early Silurian Benambran Orogenic event. The temperature and pressure increased during this time from ～530 °C and 4.6 kbar to ～630 °C and 6.2 kbar. The overprinting of garnet‐, staurolite‐ and kyanite‐bearing mineral assemblages by low‐pressure andalusite and cordierite assemblages implies ～4‐kbar decompression during Early Devonian exhumation of the Greenvale Province.     

北京西山白垩纪-古近纪多期次构造叠加作用:以周口店黄院奥陶系变形为例

北京西山中新生代多期次变形强烈,是探讨华北板块构造演化的重要窗口.构造解析及EBSD组构分析表明,黄院奥陶系发育4个期次变形,第2期NE-SW向挤压变形为主体构造样式.第1期为顶面指向SEE的简单剪切,透入性面理S₁已基本置换层理S₀,伴生110°~120°缓倾拉伸线理;自北向南,第2期变形可划分为纵弯褶皱亚带和逆冲剪切亚带,褶皱倒伏趋势和剪切条带显示上盘向SW逆冲;第3期为沿面理S₂发生的NNW向正断层式滑脱,第4期为近N-S向陡倾正断层系.依据卷入变形的闪长岩脉最年轻锆石U-Pb年龄峰值（~116 Ma）,结合区域地质资料,认为:（1）黄院奥陶系第1期SEE向剪切时代为早白垩世晚期;（2）第2期晚白垩世NE-SW向挤压变形形成于燕山运动晚期,可能与蒙古-鄂霍茨克洋关闭之后的陆陆汇聚相关.      

http://www.sciencedirect.com/science/article/pii/S1674987112000060

The Khondalite Belt within the Inner Mongolia Suture Zone（IMSZ） in the North China Craton is a classic example for Paleoproterozoic ultrahigh-temperature（UHT） metamorphism.Here we report new spinel-bearing metapelitic granulites from a new locality at Xumayao within the southern domain of the IMSZ.Petrological studies and thermodynamic modeling of the spinel+quartz-bearing assemblage shows that these rocks experienced extreme metamorphism at UHT conditions.Spinel occurs in two textural settings:（1） high X_Zn（Zn/（Mg+Fe^Ⅱ+Zn）=0.071-0.232） spinel with perthitic K-feld-spar. sillimanite and quartz in the rock matrix;and（2） low X_Zn（0.045—0.070） spinel as inclusions within garnet porphyroblasts in association with quartz and sillimanite. Our phase equilibria modeling indicates two main stages during the metamorphic evolution of these rocks:（1） near-isobaric cooling from 975℃to 875℃around 8 kbar.represented by the formation of garnet porphyroblasts from spinel and quartz;and（2）cooling and decompression from 850℃.8 kbar to below 750℃.6.5 kbar,represented by the break-down of garnet.The spinel+quartz assemblage is considered to have been stable at peak metamorphisni.formed through the break-down of cordierite.indicating a near isothermal compression process.Our study confirms the regional extent of UHT metamorphisni within the IMSZ associated with the Paleoproterozoic subduction-collision process.     

Lack of porphyroblast rotation in the Otago schists, New Zealand: implications for crenulation cleavage development, folding and deformation partitioning

Porphyroblasts of garnet and plagioclase in the Otago schists have not rotated relative to geographic coordinates during non-coaxial deformation that post-dates their growth. Inclusion trails in most of the porphyroblasts are oriented near-vertical and near-horizontal, and the strike of near-vertical inclusion trails is consistent over 3000 km². Microstructural relationships indicate that the porphyroblasts grew in zones of progressive shortening strain, and that the sense of shear affecting the geometry of porphyroblast inclusion trails on the long limbs of folds is the same as the bulk sense of displacement of fold closures. This is contrary to the sense of shear inferred when porphyroblasts are interpreted as having rotated during folding.
Several crenulation cleavage/fold models have previously been developed to accommodate the apparent sense of rotation of porphyroblasts that grew during folding. In the light of accumulating evidence that porphyroblasts do not generally rotate, the applicability of these models to deformed rocks is questionable.
Whether or not porphyroblasts rotate depends on how deformation is partitioned. Lack of rotation requires that progressive shearing strain (rotational deformation) be partitioned around rigid heterogeneities, such as porphyroblasts, which occupy zones of progressive shortening or no strain (non-rotational deformation). Therefore, processes operating at the porphyroblast/matrix boundary are important considerations. Five qualitative models are presented that accommodate stress and strain energy at the boundary without rotating the porphyroblast: (a) a thin layer of fluid at the porphyroblast boundary; (2) grain-boundary sliding; (3) a locked porphyroblast/matrix boundary; (4) dissolution at the porphyroblast/matrix boundary, and (5) an ellipsoidal porphyroblast/shadow unit.     

Combining compositional zoning and foliation intersection axes (FIAs) in garnet to quantitatively determine early P-T-t paths in multiply deformed and metamorphosed schists: north central Massachusetts,USA

Quantitative compositional and microstructural analysis of garnet porphyroblasts in kyanite–staurolite–garnet grade rocks from the northeastern flank of the Pelham dome, north central Massachusetts, distinguishes the effects of Acadian deformation and metamorphism from extensive overprinting Alleghanian shearing. The P–T conditions and the metamorphic path during the Acadian were determined using samples preserving well defined stages in a lengthy tectonic history revealed by a succession of five foliation intersection axis trends preserved within porphyroblasts (FIAs). This Acadian succession extends at least 120 km to the north into rocks where no evidence has been found of an Alleghanian overprint. For each sample where garnet first nucleated during one of these stages in the tectonic history, the PT of core growth was determined by plotting the intersection of the Mn, Fe and Ca isopleths calculated for the core composition on a P–T pseudosection for that sample using THERMOCALC. Combining the PT data from all these samples indicates that the temperature and pressure increased throughout Acadian orogenesis, causing episodic garnet growth. During the Alleghanian, locally intense shearing, especially against the margin of the Pelham dome, formed the dominant schistosity, which truncated all foliations defined by inclusion trails in porphyroblasts and obliterated all remains of Acadian deformation and metamorphism in the rock matrix. Shearing was accompanied by near complete homogenization of the compositional zoning in garnet porphyroblasts and an associated apparent increase in the temperature of the matrix to 700°C in those rocks lying directly adjacent to the Pelham dome, and resulted from the rocks of the Northfield syncline being thrust a large distance southwards over the gneisses in the dome.     

Spiral and staircase inclusion trail axes within garnet and staurolite porphyroblasts from schists of the Bolton Syncline, Connecticut: timing of porphyroblast growth and the effects of fold development

In the Littleton Formation, garnet porphyroblasts preserve three generations of growth that occurred before formation of the Bolton Syncline. Inclusion trails of foliations overgrown by these porphyroblasts are always truncated by the matrix foliation suggesting that garnet growth predated the matrix foliation. In contrast, many staurolite porphyroblasts grew synchronously with formation of the Bolton Syncline. However, local rim overgrowths of the matrix foliation suggest that some staurolite porphyroblasts continued to grow after development of the fold during younger crenulation producing deformations. The axes of curvature or intersection of foliations defined by inclusion trails inside the garnet porphyroblasts lie oblique to the axial plane of the Bolton Syncline but do not change orientation across it. This suggests the garnets were not rotated during the subsequent deformation associated with fold development or during even younger crenulation events. Three samples also contain a different set of axes defined by curvature of inclusion trails in the cores of garnet porphyroblasts suggesting a protracted history of garnet growth. Foliation intersection axes in staurolite porphyroblasts are consistently orientated close to the trend of the axial plane of the Bolton Syncline on both limbs of the fold. In contrast, axes defined by curvature or intersection of foliations in the rims of staurolite porphyroblasts in two samples exhibit a different trend. This phase of staurolite growth is associated with a crenulation producing deformation that postdated formation of the Bolton Syncline. Measurement of foliation intersection axes defined by inclusion trails in both garnet and staurolite porphyroblasts has enabled the timing of growth relative to one another and to the development of the Bolton Syncline to be distinguished in rocks where other approaches have not been successful. Consistent orientation of foliation intersection axes across a range of younger structures suggests that the porphyroblasts did not rotate relative to geographical coordinates during subsequent ductile deformation. Foliation intersection axes in porphyroblasts are thus useful for correlating phases of porphyroblastic growth in this region.     

Reaction textures in calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica: implications for the retrograde P–T path

Calc-silicate granulites from the Bolingen Islands, Prydz Bay, East Antarctica, exhibit a sequence of reaction textures that have been used to elucidate their retrograde P–T path. The highest temperature recorded in the calc-silicates is represented by the wollastonite- and scapolite-bearing assemblages which yield at least 760°C at 6 kbar based on experimental results. The calc-silicates have partially re-equilibrated at lower temperatures (down to 450°C) as evidenced by the successive reactions: (1) wollastonite + scapolite + calcite = garnet + CO₂, (2) wollastonite + CO₂= calcite + quartz, (3) wollastonite + plagioclase = garnet + quartz, (4) scapolite = plagioclase + calcite + quartz, (5) garnet + CO₂+ H₂O = epidote + calcite + quartz, and (6) clinopyroxene + CO₂+ H₂O = tremolite + calcite + quartz.
The reaction sequence observed indicates that a CO₂ was relatively low in the wollastonite-bearing rocks during peak metamorphic conditions, and may have been further lowered by local infiltration of H₂O from the surrounding migmatitic gneisses on cooling. Fluid activities in the Bolingen calc-silicates were probably locally variable during the granulite facies metamorphism, and large-scale CO₂ advection did not occur.
A retrograde P–T path, from the sillimanite stability field ( c. 760°C at 6 kbar) into the andalusite stability field ( c. 450°C at <3 kbar), is suggested by the occurrence of secondary andalusite in an adjacent cordierite–sillimanite gneiss in which sillimanite occurs as inclusions in cordierite.     

Two-stage growth of porphyroblastic biotite and garnet in the Barrovian metapelites of the Imjingang belt, central Korea

Porphyroblastic biotite and garnet in the Barrovian metapelites of the Imjingang belt, Korea, were investigated to unravel the sequence and mechanism of mineral growth. Poikiloblastic biotite contains straight inclusion trails (S_i) discontinuous to the major foliation, and develops clear zones at the grain margin. These microstructures suggest an initial growth of biotite between two contractional deformations (D_n−1 and D_n) followed by an overgrowth during D_n. Although garnet poikiloblasts contain variable S_i patterns, their major growth is likely to have occurred during D_n on the basis of compositional relationships among variable garnet types. Early poikiloblasts of both minerals were formed by chemical replacement of the matrix that consisted mainly of chlorite, muscovite and quartz. Subsequent growth of biotite was governed by a crack-filling mechanism, and was accompanied by the production of extensional cracks inside or around biotite, providing fluid pathways. The overgrowth of garnet was favoured at the biotite–garnet interface, and the consequence was a partial replacement of inclusion-poor garnet after biotite subsequent to D_n. In addition, clear zones and pressure shadows as well as the matrix around biotite porphyroblasts were replaced by garnet, suggesting an inheritance of various pre-existing microstructures in the S_i pattern of garnet. Further attention is thus required for any attempt to delineate the microstructural interaction between deformation and metamorphism, particularly in a sample containing early-grown porphyroblasts. Microstructural evidence for the two-stage growth of biotite and garnet is present up to the kyanite zone, indicating that this growth mechanism is prevalent during progressive metamorphism of Barrovian metapelites.