Pressure-temperature-fluid constraints for the Emmaville-Torrington emerald deposit, New South Wales, Australia: Fluid inclusion and stable isotope studies

The Emmaville-Torrington emeralds were first discovered in 1890 in quartz veins hosted within a Permian metasedimentary sequence, consisting of meta-siltstones, slates and quartzites intruded by pegmatite and aplite veins from the Moule Granite. The emerald deposit genesis is consistent with a typical granite-related emerald vein system. Emeralds from these veins display colour zonation alternating between emerald and clear beryl. Two fluid inclusion types are identified: three-phase (brine+vapour+halite) and two-phase (vapour+liquid) fluid inclusions. Fluid inclusion studies indicate the emeralds were precipitated from saline fluids ranging from approximately 33 mass percent NaCl equivalent. Formational pressures and temperatures of 350 to 400 °C and approximately 150 to 250 bars were derived from fluid inclusion and petrographic studies that also indicate emerald and beryl precipitation respectively from the liquid and vapour portions of a two-phase (boiling) system. The distinct colour zonations observed in the emerald from these deposits is the first recorded emerald locality which shows evidence of colour variation as a function of boiling. The primary three-phase and primary two-phase FITs are consistent with alternating chromium-rich ??striped?? colour banding. Alternating emerald zones with colourless beryl are due to chromium and vanadium partitioning in the liquid portion of the boiling system. The chemical variations observed at Emmaville-Torrington are similar to other colour zoned emeralds from other localities worldwide likely precipitated from a boiling system as well.     

Proximal and distal styles of pegmatite-related metasomatic emerald mineralization at Ianapera,southern Madagascar

The Ianapera emerald deposit is located in the Neoproterozoic Vohibory Block of southern Madagascar. The local geology consists of intercalated migmatitic gneissic units and calcareous metasedimentary rocks, containing boudinaged metamorphosed mafic/ultramafic lenses, all intruded by pegmatite veins. These units occur near the hinge of the tightly folded Ianapera antiform, within a few kilometers of the Ampanihy shear zone. Emerald mineralization is hosted by metasomatic phlogopite veins, and bodies developed within the mafic/ultramafic rocks. Based on field and textural relationships, we distinguish proximal and distal styles of mineralization. Proximal mineralization occurs at the contact of pegmatite veins with mafic/ultramafic units; in the distal style, pegmatites are not observed. Three types of emeralds could be distinguished, mainly on the basis of color and mineral zoning. Some of these emeralds have the most Al-depleted and Cr-rich composition ever recorded. Another characteristic feature to the Ianapera deposit and, to our knowledge, yet unreported, is the association of some emeralds with scapolite in metasomatised mafic rocks. Mineral inclusions are common in most emeralds and include phlogopite, carbonates, barite, K-feldspar, quartz, pyrite, zircon, monazite, bastnaesite, phenakite, plus Fe and Cr oxides. However, feldspar and rare earth element-bearing minerals occur predominantly in proximal emeralds, which also have a more incompatible trace-element signature than distal emeralds. We propose a model related to syn- to post-tectonic magmatic-hydrothermal activity. Pegmatitic bodies intruded units of the Ianapera antiform probably during tectonic relaxation. Exsolution of fluids rich in halogens and incompatible elements from the cooling pegmatites caused hydrothermal metasomatism of Cr-bearing mafic/ultramafic rocks in direct contact with the pegmatites. Local fracturing favored fluid infiltration, permitting the formation of distal mineralization. Emerald composition was controlled by the chemistry of the host rock. The presence of carbonate mineral inclusions in the emeralds and the high F-activity indicated by elevated F-contents in newly formed minerals suggest transport of Be as a fluoride-carbonate complex. It seems likely that beryl formation was triggered by precipitation of F-rich phlogopite, which removed the complexing ligand from the fluid.     

Isotope and fluid inclusion geochemistry of the Cangyuan Pb-Zn-Ag polymetallic deposit in Yunnan,SW China

The Cangyuan Pb-Zn-Ag polymetallic deposit is located in the Baoshan Block, southern Sanjiang Orogen. The orebodies are hosted in low-grade metamorphic rocks and skarn in contact with Cenozoic granitic rocks. Studies on fluid inclusions (FIs) of the deposit indicate that the ore-forming fluids are CO₂-bearing, NaCl-H₂O. The initial fluids evolved from high temperatures (462–498 °C) and high salinities (54.5–58.4 wt% NaCl equiv) during the skarn stage into mesothermal (260–397 °C) and low salinities (1.2–9.5 wt% NaCl equiv) during the sulfide stage. The oxygen and hydrogen isotopic compositions (δ¹⁸O_H2O: 2.7–8.8‰; δD: −82 to −120‰) suggest that the ore-forming fluids are mixture of magmatic fluids and meteoric water. Sulfur isotopic compositions of the sulfides yield δ³⁴S values of −2.3 to 3.2‰; lead isotopic compositions of ore sulfides are similar to those of granitic rocks, indicating that the sulfur and ore-metals are derived from the granitic magma. We propose that the Cangyuan Pb-Zn-Ag deposit formed from magmatic hydrothermal fluids. These Cenozoic deposits situated in the west of Lanping-Changdu Basin share many similarities with the Cangyuan in isotopic compositions, including the Laochang, Lanuoma and Jinman deposits. This reveals that the Cenozoic granites could have contributed to Pb-Zn-Cu mineralization in the Sanjiang region despite the abundance of Cenozoic Pb-Zn deposits in the region, such as the Jingding Pb-Zn deposit, that is thought to be of basin brine origin.     

Geological Evolution of Selected Granitic Pegmatites in Myanmar (Burma): Constraints from Regional Setting,Lithology, and Fluid-Inclusion Studies

Pegmatite deposits commonly occur in the 1500 km long, N-S-trending, tungstentin-bearing granitoid belt in Myanmar. Pegmatites are emplaced as veins and dikes that cut granitoid, migmatite, granitoid gneiss, gneiss, and schist. The pegmatite veins and dikes are mostly 2 to 5 meters wide and 30 to 150 meters long, and some are traceable over a distance of 300 meters.

The pegmatites are composed of quartz, orthoclase, albite, microcline microperthite, and muscovite, with minor biotite, tourmaline, beryl, garnet, topaz, lepidolite, magnetite, wolframite, cassiterite, and rare columbite. They are commonly zoned, feldspars and muscovite being more abundant in the center and quartz more common at the margin. The zoning pattern is rather distinct in the pegmatite body, where tourmaline is present. The light-colored felsic minerals are confined to the core zone and the dark-colored tourmaline crystals to the outer zone.

Numerous fluid inclusions have been found in quartz, topaz, and beryl. Most of the inclusions are rounded to elliptical, with a variable degree of liquid filling. All inclusions are aqueous, two-phase (liquid and vapor) inclusions with no daughter minerals. Homogenization temperatures of 173 fluid inclusions were measured in this study.

Geothermometric studies indicate that the pegmatites were formed over a homogeniza-tion temperature range of 230° to 410°C. Salinities of fluid inclusions in pegmatite minerals yielded from 1.0 to 10.8 NaCl equiv. wt‰. Topaz and quartz single crystals (several cm across) from the Sakangyi pegmatite provide an opportunity to extract the fluids trapped in these minerals. The Na/K ratios of the fluid inclusions in two topaz samples were 3.0 to 4.9, and those of two quartz samples were 2.9 to 10.5, suggesting the presence of substantial potassium in the pegmatite-forming fluids. In this study, evidence for phase separation of the pegmatite-forming fluids was not observed. The post-magmatic, hydrothermal fluids responsible for the pegmatite veins evidently emanated from cooling S-type granitoids, with which they are spatially associated.     

SWIR ASTER band ratios for lithological mapping and mineral exploration: a case study from El Hudi area, southeastern desert, Egypt

This study aims to discriminate and to map the basement rocks as well as the barite mineralization exposed at El Hudi area, Southeastern Desert, Egypt using the processed short-wave infrared bands of advanced space-borne thermal emission and reflection radiometer (ASTER) in collaboration with the field verification and petrographic analysis. El Hudi area is covered dominantly by the Late Precambrian high-grade metamorphic complex of metasedimentary rocks (gneisses, schists, migmatites, and minor amphibolites) which are intruded by the younger granitoids. Nubian sandstones unconformably overlie the basement outcrops and occur as a remnant caps. The metasedimentary rocks cover the area of interest forming a belt of biotite gneisses and migmatites intercalated with hornblende biotite schists and minor amphibolites. Their exposures exhibit well-foliated and banded structures. The metasedimentary rocks have gray and dark gray image signatures on the ASTER band ratio image 8/5, which correspond to biotite gneiss, migmatites, and hornblende biotite schists, respectively. Presence of absorption feature near band 8 (2.295 – 2.365 μm) for the chlorite alteration product is probably responsible for the lowering of the 8/5 band ratio value and the dark gray image signature exhibited by hornblende biotite schists. The granitoid rocks in El Hudi area are late to postorogenic younger granitoids including three main rock types, Abu Aggag granites, El Hudi garnetiferous muscovite granites, and coarse-grained biotite granites. The acidic dykes are cutting across the granitoids and the gneisses and they form a highly elevated ridges and peaks showing sharp contact with the invaded rocks. Abu Aggag granites are highly dissected by great number of both strike- and dip-slip faults as well as joints trending in NNW–SSE, NNE–SSW, N–S, ENE–WSW, and WNW–ESE directions. On 7/8 band ratio image, Abu Aggag granites have dark gray image signature whereas postgranitic dykes have white image signature. Under the microscope, Abu Aggag granites are homogenous medium to coarse-grained rocks composed mainly of quartz, plagioclase, microcline, and biotite. Zircon, apatite, and opaques are accessories, while chlorite, kaolinite, and epidote are secondary minerals. Presence of absorption feature around band 7 (2.235–2.285 μm) for the kaolinite mineral may be responsible for the dark gray image signature exhibited by Abu Aggag granites. El Hudi garnetiferous muscovite granites are hosting El Hudi barite veins which extend mainly in NNW–SSE and NW–SE. Garnetiferous muscovite granites have gray image signature on 5/4 band ratio image whereas pegmatites and postgranitic dykes have black image signature. Barite veins can be distinguished within garnetiferous muscovite granites by their dark gray image signature on 5/4 band ratio image. The spectral reflectance curve of barite exhibits absorption feature around 2.1 μm (band 5), which leads to lower the ratio value and yields the dark image signature to barite veins. The above-described ASTER band ratio images were integrated into one false-color composite image (8/5:R; 5/4G; and 7/8B) which was used to produce 1:100,000 geological map for El Hudi area and to locate the barite mineralization.     

Geologic and fluid inclusion studies of ten types of tungsten ore deposits in South China

There are 10 types of tungsten ore deposits in South China: granite, porphyry, volcanic, pegmatite, skarn, greisen, wolframite-quartz ± microcline veins, stratabound, ferberite-quartz veins and placer. Most are chronologically related to Yenshanian granites. Integrated field, mineralogic, fluid inclusion and geochemical studies were undertaken to determine the characteristics and origin of the ores. Most of the tungsten ore deposits are also spatially related to Yenshanian granites. These granites include several intrusions, isotopically dated at 160–180 m. y. and 70–100 m. y. The concentration of trace elements, especially W Mo, Sn, Ta, Nb, Li, and F are relatively high in the granites. In the granites of South China, the average WO₃ is 4.35 ppm, but in Yenshanian granites, which are the youngest of these, the average WO₃ is 5.16 ppm. In the youngest of Yenshanian granites, a light mica-albite granite has been identified, whose average WO₃ is as high as 242.3 ppm. From this line of evidence, the tungsten ore deposits in South China are considered to be genetically related to Yenshanian granites. Wolframite-sulfide-quartz veins and scheelite skarns provide the bulk of the reserves and production. There are many different kinds of alteration associated with the different tungsten ore deposits, but the principal ones are silicification, greisenization, potash-feldspathization and chloritization. Four types of fluid inclusions were found:

1. Liquid-rich;
2. Gas-rich;
3. Liquid CO₂-bearing;
4. Polyphase with daughter minerals.

Most common are type I inclusions. Type IV fluid inclusions only appeared in the porphyry and skarns. In skarns, type IV inclusions are evidently confined to the early stage, i.e., the simple silicate stage, but in the later scheelite mineralization stage, only types I and III inclusions occurred. Types II and III were found in the wolframite-quartz-sulfide veins, especially at the top of the veins. Homogenization temperature and salinity were determined on the inclusions, and the pressure of formation was estimated from the inclusions. The homogenization temperatures of some of these types of tungsten ore deposits are as follows: porphyry, 386°C; greisen, 244–301°C; granite, 220°C; wolframite-sulfide-quartz veins, 240–310°C; wolframite-microcline-quartz veins, 267–325°C; stratabound, 219°C; and ferberite-quartz veins. 142°C. The salinity of fluid inclusions in the wolframite-sulfide-quartz veins type was only 5–10% equiv. NaCl. The pressures of formation, determined from the tomperature of homogenization, volume and density of phases in H₂O-CO₂ inclusions, from veins in three different wolframite-sulfide-quartz deposits, were 450, 550, and 750 atm., respectively. Most of the tungsten ore deposits were formed between 220°C and 390°C, with the porphyry highest and the ferberite-quartz veins type lowest. In the wolframite sulfide-quartz veins, four stages can be recognized: oxide-silicate; wolframitequartz-beryl; wolframite-quartz-sulfide; and carbonate. Throughout this sequence, the salinity and temperature decrease, e. g., from 293°C to 129°C. It is concluded that these particular tungsten deposits were formed from a dilute water solution at moderate to high temperatures and at moderate pressures.     

Geological and Fluid Inclusion Constraints on Gold Deposition Processes of the Dayingezhuang Gold Deposit,Jiaodong Peninsula,China

The Dayingezhuang gold deposit, hosted mainly by Late Jurassic granitoids on Jiaodong Peninsula in eastern China, contains an estimated 170 t of gold and is one of the largest deposits within the Zhaoping fracture zone. The orebodies consist of auriferous altered pyrite–sericite–quartz granites that show Jiaojia-type (i.e., disseminated and veinlet) mineralization. Mineralization and alteration are structurally controlled by the NE- to NNE-striking Linglong detachment fault. The mineralization can be divided into four stages: (K-feldspar)–pyrite–sericite–quartz, quartz–gold–pyrite, quartz–gold–polymetallic sulfide, and quartz–carbonate, with the majority of the gold being produced in the second and third stages. Based on a combination of petrography, microthermometry, and laser Raman spectroscopy, three types of fluid inclusion were identified in the vein minerals: NaCl–H2O (A-type), CO2–H2O–NaCl (AC-type), and pure CO2 (PC-type). Quartz crystals in veinlets that formed during the first stage contain mainly AC-type fluid inclusions, with rare PC-type inclusions. These fluid inclusions homogenize at temperatures of 251°C–403°C and have low salinities of 2.2–9.4 wt% NaCl equivalent. Quartz crystals that formed in the second and third stages contain all three types of fluid inclusions, with total homogenization temperatures of 216°C–339°C and salinities of 1.8–13.8 wt% NaCl equivalent for the second stage and homogenization temperatures of 195°C–321°C and salinities of 1.4–13.3 wt% NaCl equivalent for the third stage. In contrast, quartz crystals that formed in the fourth stage contains mainly A-type fluid inclusions, with minor occurrences of AC-type inclusions; these inclusions have homogenization temperatures of 106°C–287°C and salinities of 0.5–7.7 wt% NaCl equivalent. Gold in the ore-forming fluids may have changed from Au(HS)0 as the dominant species under acidic conditions and at relatively high temperatures and fO2 in the early stages, to Au(HS)2– under neutral-pH conditions at lower temperatures and fO2 in the later stages. The precipitation of gold and other metals is inferred to be caused by a combination of fluid immiscibility and water–rock interaction.     

Immiscibilty between silicate magma and aqueous fluids in Egyptian rare-metal granites: melt and fluid inclusions study

Rare-metal granites of Nuweibi and Abu Dabbab, central Eastern Desert of Egypt, have mineralogical and geochemical specialization. These granites are acidic, slightly peraluminous to metaaluminous, Li–F–Na-rich, and Sn–Nb–Ta-mineralized. Snowball textures, homogenous distribution of rock-forming accessory minerals, disseminated mineralization, and melt inclusions in quartz phenocrysts are typical features indicative of their petrographic specialization. Geochemical characterizations are consistent with low-P-rare metal granite derived from highly evolved I-type magma in the late stage of crystallization. Melt and fluid inclusions were studied in granites, mineralized veins, and greisen. The study revealed that at least two stages of liquid immiscibility played an important role in the evolution of magma–hydrothermal transition as well as mineral deposition. The early stage is melt/fluid case. This stage is represented by the coexistence of type-B melt and aqueous-CO₂ inclusions in association with topaz, columbite–tantalite, as well as cassiterite mineral inclusions. This stage seems to have taken place at the late magmatic stage at temperatures between 450 °C and 550 °C. The late magmatic to early hydrothermal stage is represented by vapor-rich H₂O and CO₂ inclusions, sometimes with small crystallized silicic melt in greisen and the outer margins of the mineralized veins. These inclusions are associated with beryl, topaz, and cassiterite mineralization and probably trapped at 400 °C. The last stage of immiscibility is fluid–fluid and represented by the coexisting H₂O-rich and CO₂-rich inclusions. Cassiterite, wolframite ± chalcopyrite, and fluorite are the main mineral assemblage in this stage. The trapping temperature was estimated between 200 °C and 350 °C. The latest phase of fluid is low-saline, low-temperature (100–180 °C), and liquid-rich aqueous fluid.     

Geological and fluid inclusion studies of the Dongpo tungsten skarn ore deposit,China

The Dongpo tungsten ore deposit, the largest scheelite skarn deposit in China, is located at the contact of a 172-m. y. biotite granite with a Devonian marble. The mineralization associated with the granite includes W, Bi-Mo, Cu-Sn and Pb-Zn ores. Several W mineralization stages are shown by the occurrence of ore in massive skarn deposits and in later cross-cutting veins. The high garnet/pyroxene ratio, the hedenbergite and diopside-rich pyroxene and the andradite-rich garnet show the deposit belongs to the oxidized skarn type. Detailed fluid inclusion studies of granite, greisen, skarn and vein samples reveal three types of fluid inclusion: (1) liquid-rich, (2) gas-rich and (3) inclusions with several daughter minerals. Type (3) is by far the most common in both skarn and vein samples. The dominant daughter mineral in fluid inclusions is rhembic, highly birefringent, and does not dissolve on heating even at 530°C. We assume that this mineral is calcite. The liquid phase in most of the fluid inclusions has low to moderate salinities: 0–15 wt. %; in a few has higher salinities (30–40 wt. % NaCl equivalent). The homogenization temperatures of inclusions in the skarn stage range from 350°C to 530°C, later tungsten mineralization-stage inclusions homogenize between 200°C and 300°C, as do inclusions in veins. Fluid inclusions in granite and greisen resemble those of the late tungsten mineralization stage, with low salinity and homogenization temperatures of 200°–360°C. The tungsten-forming fluids are probably a mixture that came from biotite granite and the surrounding country rocks.     

Gold potential of the volcanoplutonic zones in the southeastern Siberian Platform and physicochemical conditions of the deposit formation

Numerous gold deposits and occurrences were recognized in the regions of tectonomagmatic activation in the southeastern Siberian Platform. They are located in four metallogenic zones: the Ket-Kap (skarns, quartz veins, and stockworks; gold-bearing lodes in silicitolites; and argillisite-sericite metasomatites), Ulkan (clayey-micaceous metasomatites, quartz veins), Preddzhugdzhur (quartz veins, skarns, and sericite-hydromicaceous metasomatites), and Uda (sericite-hydromicaceous metasomatites). The skarn mineralization is of Meosozoic age, while the mineralization in the quartz veins, quartz-hydromicaceous metasomatites, and quartz-sulfide veins may have a Meosozoic, Paleozoic, or Late Paleozoic age. The highest temperatures were determined for the ore formation in the Preddzhugdzhur skarns (500–715 °C) and the hydrothermal-metasomatic rocks of the Ket-Kap zone (510–530 °C). The composition of gas-liquid inclusions in the minerals of these rocks is dominated by aqueous Na, K, and Ca chloride solutions with salinity up to 40 wt % NaCl equiv; fluid contains CO₂. Quartz veins and stockworks of the Ket-Kap zone were formed under high (up to 465°C) and moderate temperatures and salinity up to 32 wt % NaCl equiv. Sometimes, the minerals in these rocks contain inclusions of low-density CO₂. The gold-bearing veins of the Preddzhugdzhur zone formed at 225–230°C and salinity of 1–2 wt % NaCl equiv. The ore-bearing solutions in the gold-bearing veins of the Ulkan zone are characterized by a potassium-sodium-chlorine composition and salinity of 2–10 wt % NaCl equiv., and the temperature of their formation was 220–280 °C.     

The Durulgui rare-metal granite‒pegmatite system in the eastern Transbaikal region: Petrological and geochronological aspects

The Durulgui granite?pegmatite system unites the Dedova Gora granite massif and pegmatite field with the Chalotskoe beryl deposit. New geochronological data on micas from porphyric biotite granites, fine-grained biotite granites, two-mica granites, and Be-bearing pegmatites are discussed. The plateau age of 128.5(±1.5)–131.2(±1.5) should be considered as indicating the formation time of the granite?pegmatite system as a whole. The age of the system implies the possibility of its formation owing to several magmatic pulses. This assumption concerns porphyric and fine-grained biotite granites and two-mica and muscovite granites, the contact between which is locally sharp. At the same time, the succession “two-mica granites → muscovite granites → granite?pegmatites → microcline pegmatites → microcline?albite pegmatites → albite pegmatites” demonstrates gradual facies transitions between rocks, which indicates their emplacement during a single magmatic pulse.     

Genesis of the Fuxing porphyry Cu deposit in Eastern Tianshan,China: Evidence from fluid inclusions and C–H–O–S–Pb isotope systematics

The Fuxing porphyry Cu deposit is a recently discovered deposit in Eastern Tianshan, Xinjiang, northwestern China. The Cu mineralization is associated with the Fuxing plagiogranite porphyry and monzogranite, mainly presenting as various types of hydrothermal veins or veinlets in alerted wall rocks, with potassic, chlorite, phyllic, and propylitic alteration developed. The ore-forming process can be divided into four stages: stage I barren quartz veins, stage II quartz–chalcopyrite–pyrite veins, stage III quartz–polymetallic sulfide veins and stage IV quartz–calcite veins. Four types of fluid inclusions (FIs) can be distinguished in the Fuxing deposit, including hypersline (H-type), vapor-rich two-phase (V-type), liquid-rich two-phase (L-type), and trace amounts of pure vapor inclusions (P-type), but only the stage I quartz contains all types of FIs. The stages II and III quartz have two types of FIs, with exception of H- and P-types. In stage IV quartz minerals, only the L-type inclusions can be observed. The FIs in quartz of stages I, II, III and IV are mainly homogenized at temperatures of 357–518 °C, 255–393 °C, 234–322 °C and 145–240 °C, with salinities of 1.9–11.6 wt.% NaCl equiv., 1.6–9.6 wt.% NaCl equiv., 1.4–7.7 wt.% NaCl equiv. and 0.9–3.7 wt.% NaCl equiv., respectively. The ore-forming fluids of the Fuxing deposit are characterized by high temperature, moderate salinity and relatively oxidized condition. Carbon, hydrogen and oxygen isotopic compositions of quartz indicate that the ore-forming fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials were derived from a deep-seated magma source. The Cu mineralization in the Fuxing deposit occurred at a depth of ~ 1 km, and the changes of oxygen fugacity, decompression boiling, and local mixing with meteoric water were most likely critical for the formation of the Fuxing Cu deposit.     

Chronology and Geochemistry of the Berezitovoe Polymetallic Gold Deposit in Eastern Siberia, Russia and its Geological Significance

The Berezitovoe deposit is a large-sized Au-Ag-Zn-Pb deposit in the east of the SelengaStanovoi superterrane, Russia. Au-Ag orebodies are hosted by tourmaline-garnet-quartz-muscovite metasomatic rocks; Zn-Pb orebodies are hosted by granodiorites, porphyritic granites and tourmalinegarnet-quartz-muscovite metasomatic rocks. These orebodies are surrounded by wall rocks dominated by the Tukuringra Complex granodiorites, porphyritic granites, and gneissic granodiorites. The alteration includes silicification and garnet, sericitization chloritization, carbonatization and kaollinization. LA-ICP-MS U-Pb zircon dating indicates that the gold mineralization can be divided into two stages in the Berezitovoe polymetallic gold deposit(at 363.5 ± 1.5 Ma, and133.4± 0.5).Hornblende-plagioclase gneisses of the Mogocha Group in the study area underwent Paleoproterozoic metamorphism(at 1870 ± 7.8 and 2400 ± 13 Ma), gneissic granodiorite of the Tukuringra Complex yields a late Paleozoic magmatic age(at 379.2 ± 1.1 Ma),and subalkaline porphyritic granitoid of the Amudzhikan Complex yield late Mesozoic magmatic ages(133-139 and 150-163 Ma). Granodiorites of the Tukuringra Complex in the study area have high concentrations of SiO_2(average of 60.9 wt%), are aluminum-oversaturated(average A/CNK of 1.49), are enriched in the large ion lithophile elements(e.g.,K, Rb, and Ba), U, Th, and Pb, are depleted in high field strength elements(e.g., Ta, Nb, and Ti), and have slightly negative Eu and no Ce anomalies in chondrite-normalized rare earth element diagrams.Fluid inclusions from quartz veins include three types: aqueous two-phase, CO_2-bearing three-phase,and pure CO_2. Aqueous two-phase inclusions homogenize at 167℃-249℃ and have salinities of 4.32%-9.47% NaCl equivalent, densities of 0.86-0.95 g/cm~3, and formed at depths of 0.52-0.94 km. In comparison, the C0_2-bearing three-phase inclusions have homogenization temperatures of 265℃-346℃,salinities of 7.14%-11.57% NaCl equivalent, and total densities of 0.62-0.67 g/cm~3. The geochemical and zircon U-Pb data and the regional tectonic evolution of the study area, show that the Berezitovoe polymetallic gold deposit formed in an island arc or active continental margin setting, most probably related to late Paleozoic subduction of Okhotsk Ocean crust beneath the Siberian Plate.     

Petrographic and microthermometrical studies of emeralds in the ‘Garimpo’ of Capoeirana,Nova Era,Minas Gerais State,Brazil

Petrographic investigations in the area of the Capoeirana emerald deposit, Minas Gerais State, revealed two main lithostructural units. The first unit is comprised of gneissic rocks of granitic composition belonging to the basement complex, and the second is composed of a highly weathered metasedimentary-metavolcanic sequence represented by metapelitic schists, amphibolites, schists derived from ultramafic rocks, and quartzites. Quartz and pegmatoid veins appear near the contacts between the gneissic rocks and the mineralization metasedimentary-metavolcanic sequence. The emerald mineralization is dominantly concentrated within the intercalations of meta-ultramafic schists near the contact of the pegmatoid veins. Microthermometric studies of the fluid inclusions of the emerald grains indicate that crystallization occurred in the pressure and temperature ranges of 2000 to 2750 bar and 450 to 650 °C, respectively. These data suggest that the mineralizing solutions have had a late hydrothermal-pneumatolytic origin characterized by low pressures, suggestive of the paragenesis talc + tremolite + carbonate + biotite-phlogopite + chlorite of the emerald wall rocks.     

Geology,Fluid Inclusion Characteristics and H–O–C Isotopes of Large Lijiagou Pegmatite Spodumene Deposit in Songpan–Garze Fold Belt,Eastern Tibet: Implications for ore Genesis

The large, newly discovered Lijiagou pegmatite spodumene deposit, is located southeast of the Ke'eryin pegmatite ore field, in the central Songpan–Garze Fold Belt (SGFB), Eastern Tibet. The Lijiagou albite spodumene pegmatites are unzoned, granite‐pegmatites of the subtype LCT (Lithium, Cesium, and Tantalum) and consist of medium‐ to coarse‐grained spodumene, lepidolite, microcline, albite, quartz, muscovite, and accessory amounts of beryl, cassiterite, columbite–tantalite and zircon. Secondary fluid inclusions in quartz and spodumene include two‐phase aqueous inclusions (V + L), mono‐phase vapor inclusions (V); three‐phase CO₂‐rich CO₂–H₂O inclusions (CO₂ + V + L) and less abundant liquid inclusions (L). The homogenization temperature of the fluid inclusions are low (257.3 to 204.3°C in early stage, 250.3 to 199.6°C in middle stage, 218.7 to 200.6°C in late stage). Fluid inclusions were formed during the long cooling period from the temperature of the pegmatite emplacement. Liquid–vapor–gas boiling was extensive during the middle and late stages. The salinity of the corresponding stages are 15.4 to 13.0 wt.% NaCl equiv., 12.5 to 9.1 wt.% NaCl equiv. and 9.8 to 7.8 wt.% NaCl equiv., respectively. δ¹⁸O values of fluid are 7.2 to 5.2‰, 5.6 to 3.9‰ and 2.7 to −0.2‰ from early to late stages; and δD range from −75.1 to −76.8‰, −59.0 to −73.5‰ and −61.6 to −85.5‰ respectively. The δ¹³C of CO₂ values are −5.6 to −6.6‰, −8.5 to −19.9‰, −11.8 to −18.7‰ from early to late stages, suggesting that CO₂ in the fluids were probably sourced from a magmatic system, possibly with some mixing of CO₂ dissolved in groundwater. δD and δ¹⁸O values of fluid indicate that the fluids were originally magmatic water and mixed with some meteoric water in late stage. The magma evolution sequence in the Ke'eryin orefield, from the central two‐mica granite through the Lijiagou deposit out to the distal pegmatites, with the ages gradually decreasing, indicates that the Ke'eryin complex rocks are the product of multistage magmatic activity. The large Lijiagou spodumene deposit is a typical magmatic, fractional crystallization related pegmatite deposit.     

Evolution of mineralizing fluids of cassiterite–wolframite and fluorite deposits from Mueilha tin mine area, Eastern Desert of Egypt, evidence from fluid inclusion

Sn–W deposit of the Mueilha mine is one of many other Sn–W deposits in the Eastern desert of Egypt that associated with albite granite. Two forms of Sn–W mineralizations are known at the Mueilha Sn-mine area, namely fissure filling quartz veins and greisen. Cassiterite and/or wolframite, sheelite, and beryl are the main ore minerals in the greisen and quartz veins. Subordinate chalcopyrite and supergene malachite and limonite are also observed in the mineralized veins. To constrain the P–T conditions of the Sn–W mineralizations, fluid inclusions trapped in quartz and cassiterite, have been investigated. The following primary fluid inclusion types are observed: CO₂-rich, two-phase (L?+?V) aqueous, and immiscible three-phase (H₂O–CO₂) inclusions. Low temperature and low salinity secondary inclusions were also detected in the studied samples. Microthermometric results revealed that Sn–W deposition seem to have taken place due to immiscibility at temperature between 260°C and 340°C, and estimated pressure between 1.2 to 2.2 kb. Microthermometric results of fluid inclusions in fluorite from fluorite veins illustrated that fluorite seems to be deposited due to mixing of two fluids at minimum temperature 140°C and 180°C, and estimated minimum pressure at 800 bars.     

云南麻栗坡祖母绿的矿物包裹体特征研究

采用偏光显微镜薄片观察、电子探针及背散射图像、阴极发光等方法,分别对伟晶岩矿脉和顺层剪切带矿脉两种产出状态的云南麻栗坡祖母绿进行了系统的包裹体特征研究。结果表明,云南麻栗坡祖母绿具有产地特征的包裹体有黑色镁电气石、含钒的白云母、具有环带的钾长石、毒砂、镁质黑云母、白钨矿包裹体。伟晶岩脉和顺层剪切带中的祖母绿均含有钾长石、钠长石、电气石、萤石、祖母绿(绿柱石)、黑云母、榍石、磷灰石、黄铁矿、绿泥石、绿帘石包裹体。白云母、方解石、石英、锆石、毒砂、闪锌矿、方铅矿、透辉石仅出现在伟晶岩脉中的祖母绿包裹体中;而白钨矿仅出现在顺层剪切带中的祖母绿包裹体中。对云南不同产状祖母绿矿物包裹体的研究不仅对祖母绿的产地鉴定具有宝石学意义,也对揭示云南麻栗坡祖母绿的成因类型具有重要意义。     

Fluid Inclusion Studies of Comb Quartz and Stibnite at the Hishikari Au–Ag Epithermal Deposit,Japan

Fluid inclusion microthermometry was conducted on late‐stage barren comb quartz and the latest stibnite at the Hishikari deposit to characterize the hydrothermal activity responsible for vein formation. Eight fluid inclusion assemblages (i.e. fluid inclusions trapped at the same time, ‘FIAs’) were studied to determine the formation fluid temperatures and salinities for the comb quartz in the Shosen No. 2 vein, Sanjin ore zone, and the stibnite in the Seisen No. 1–1 vein, Yamada ore zone. The average homogenization temperatures (the formation temperatures) of the seven FIAs from the comb quartz were between 207 and 230°C, while the average homogenization temperature (the formation temperature) of an FIA from the stibnite was 113°C. The measured fluid salinities of the seven FIAs from the comb quartz were low, ranging between 0.0 and 1.1 wt% NaCl equiv., indicating that dilute fluids were responsible for the comb quartz formation. By comparison with previous microthermometric data, the formation temperatures of the studied comb quartz were higher than those of columnar adularia and comb quartz at most other veins (generally around 200°C) but were similar to those of columnar adularia at Keisen veins (230°C) in the same ore zone. The higher formation temperatures both in the Shosen and the Keisen veins in the Sanjin ore zone indicate that the fractures corresponding to the vein system at the Sanjin ore zone were main conduits for hot ascending fluids. The low formation temperature of stibnite in the latest stage (113°C) indicates that stibnite precipitation occurred during a waning stage of hydrothermal activity. Combined with previous thermodynamic data on antimony solubilities, the large discrepancy between the formation temperature of the comb quartz (200–230°C) and that of the stibnite suggests that the stibnite may have precipitated as a result of a drastic cooling of the hydrothermal system.     

Genesis of the Proterozoic Mangabeira tin–indium mineralization,Central Brazil: Evidence from geology,petrology, fluid inclusion and stable isotope data

The Mangabeira deposit is the only known Brazilian tin mineralization with indium. It is hosted in the Paleo- to Mesoproterozoic Mangabeira within-plate granitic massif, which has geochemical characteristics of NYF fertile granites. The granitic massif is hosted in Archean to Paleoproterozoic metasedimentary rocks (Ticunzal formation), Paleoproterozoic peraluminous granites (Aurumina suite) and a granite–gneiss complex. The mineralized area comprises evolved Li-siderophyllite granite, topaz–albite granite, Li–F-rich mica greisens and a quartz–topaz rock, similar to topazite. Two types of greisens are recognized in the mineralized area: zinnwaldite greisen and Li-rich muscovite greisen, formed by metasomatism of topaz–albite granite and Li-siderophyllite granite, respectively. Cassiterite occurs in the quartz–topaz rock and in the greisens. Indium minerals, such as roquesite (CuInS₂), yanomamite (InAsO₄·2H₂O) and dzhalindite (In(OH₃)), and In-rich cassiterite, sphalerite, stannite group minerals and scorodite are more abundant in the quartz–topaz rock, and are also recognized in albitized biotite granite and in Li-rich muscovite greisen. The host rocks and mineralized zones were subsequently overprinted by the Brasiliano orogenic event.Primary widespread two-phase aqueous and rare coeval aqueous-carbonic fluid inclusions are preserved in quartz from the topaz–albite granite, in quartz and topaz from the quartz–topaz rock and in cassiterite from the Li-rich muscovite greisen. Eutectic temperatures are − 25 °C to − 23 °C, allowing modeling of the aqueous fluids in the system H₂O–NaCl(–KCl). Rare three-phase H₂O–NaCl fluid inclusions (45–50 wt.% NaCl equiv.) are restricted to the topaz–albite granite. Salinities and homogenization temperatures of the aqueous and aqueous-carbonic fluid inclusions decrease from the topaz–albite granite (15–20 wt.% NaCl equiv.; 400 °C–450 °C), to the quartz–topaz rock (10–15 wt.% NaCl equiv.; 250 °C–350 °C) and to the greisen (0–5 wt.% NaCl equiv.; 200 °C–250 °C). Secondary fluid inclusions have the same range of salinities as the primary fluid inclusions, and homogenize between 150 and 210 °C.The estimated equilibrium temperatures based on δ¹⁸O of quartz–mica pairs are 610–680 °C for the topaz–albite granite and 285–370 °C for the Li-rich muscovite greisens. These data are coherent with measured fluid inclusion homogenization temperatures. Temperatures estimated using arsenopyrite geothermometry yield crystallization temperatures of 490–530 °C for the quartz–topaz rock and 415–505 °C for the zinnwaldite greisens. The fluids in equilibrium with the topaz–albite granite have calculated δ¹⁸O and δD values of 5.6–7.5‰ and − 67 to − 58‰, respectively. Estimated δ¹⁸O and δD values are mainly 4.8–7.9‰ and − 60 to − 30‰, respectively, for the fluids in equilibrium with the quartz–topaz rock and zinnwaldite greisen; and 3.4–3.9‰ and − 25 to − 17‰, respectively, for the Li-rich muscovite greisen fluid. δ³⁴S data on arsenopyrite from the quartz–topaz rock vary from − 1.74 to − 0.74‰, consistent with a magmatic origin for the sulfur. The integration of fluid inclusion with oxygen isotopic data allows for estimation of the minimum crystallization pressure at ca. 770 bar for the host topaz–albite granite, which is consistent with its evolved signature.Based on petrological, fluid inclusion and isotope data it is proposed that the greisens and related Mangabeira Sn–In mineralization had a similar hydrothermal genesis, which involved exsolution of F-rich, Sn–In-bearing magmatic fluids from the topaz–albite granite, early formation of the quartz–topaz rock and zinnwaldite greisen, progressive cooling and Li-rich muscovite greisen formation due to interaction with meteoric water. The quartz–topaz rock is considered to have formed in the magmatic-hydrothermal transition. The mineralizing saline and CO₂-bearing fluids are interpreted to be of magmatic origin, based on the isotopic data and paragenesis, which has been documented as characteristic of the tin mineralization genetically related to Proterozoic within-plate granitic magmatism in the Goias Tin Province, Central Brazil.     

Metasomatism of ferroan granites in the northern Aravalli orogen,NW India: geochemical and isotopic constraints,and its metallogenic significance

The late Palaeoproterozoic (1.72–1.70 Ga) ferroan granites of the Khetri complex, northern Aravalli orogen, NW India, were extensively metasomatised ~900 Ma after their emplacement, at around 850–830 Ma by low-temperature (ca. 400 °C) meteoric fluids that attained metamorphic character after exchanging oxygen with the surrounding metamorphic rocks. Albitisation is the dominant metasomatic process that was accompanied by Mg and Ca metasomatism. A two-stage metasomatic model is applicable to all the altered ferroan intrusives. The stage I is represented by a metasomatic reaction interface that developed as a result of transformation of the original microcline–oligoclase (An_12–14) granite to microcline–albite (An_1–3) granite, and this stage is rarely preserved. In contrast, the stage II metasomatic reaction front, where the microcline-bearing albite granite has been transformed to microcline-free albite granite, is readily recognisable in the field and present in most of the intrusives. Some of them lack an obvious reaction interface due to the presence of stage II albite granites only. When studied in isolation, these intrusives were incorrectly classified and their tectonic setting was misinterpreted. Furthermore, our results show that the mafic mineralogy of metasomatised granites has a significant impact on the characterisation of such rocks in the magmatic classification and discrimination diagrams. Nevertheless, the stage I metasomatised granites can be appropriately characterised in these diagrams, whereas the characterisation of the stage II granites will lead to erroneous interpretations. The close spatial association of these high heat producing ferroan granites with iron oxide–copper–gold (IOCG), U and REE mineralisation in the region indicates a genetic link between the metasomatism and the mineralisation. World-class IOCG, U and REE deposits are associated with metasomatised ferroan granites, suggesting that such a relationship may act as a critical first-order exploration target for undiscovered mineral deposits.