The Romagna Apennines,Italy: an eroded duplex

The study of clast composition carried out on the alluvial gravels of the Romagna Apennines of northern Italy has provided evidence for an extensive covering of allochthonous units (Ligurian nappe and Epiligurian succession) above the Miocene foredeep deposits (Marnoso‐Arenacea Formation), which has been subsequently eroded during the Late Miocene–Pleistocene uplift. This result is confirmed by the burial history outlined in the Marnoso‐Arenacea Formation through vitrinite reflectance and apatite fission‐track analyses. The Romagna Apennines represent, therefore, a regional tectonic window where the thrust system that displaced the Marnoso‐Arenacea Formation crops out. The geometric relations between this thrust system and the basal thrust of the Ligurian nappe, exposed at the boundaries of the Romagna Apennines (Sillaro Zone and Val Marecchia klippe), are consistent with a duplex structure. Thus, the Romagna Apennines thrust system is an eroded duplex. The duplex roof‐thrust corresponds to the surface of the synsedimentary overthrust of the Ligurian nappe on the Marnoso‐Arenacea Formation; the floor‐thrust is located in the pelagic pre‐foredeep deposits (Schlier Formation). Copyright © 2001 John Wiley & Sons, Ltd.     

Tectonics and quaternary evolution of the Northern Apennines watershed area (upper course of Arno and Tiber rivers,Italy)

This work examines the connection between Quaternary tectonics and erosion/incision processes in the primary Tuscan‐Romagna watershed of the Northern Apennines, which essentially coincides with the topographic culmination of the Nero Unit structural ridge. Tectonic and geomorphic information were collected in the area where this ridge is crossed by the upper Tiber River course forming a deep gorge. Structural analysis and field mapping have revealed that the region experienced polyphase tectonics with superposed thrust folding events identifiable both at the map and mesoscopic scales. Hinterland‐SSW‐verging thrusts and thrust‐related folds deformed the whole thrust pile during the latest deformation phase. Backthrusts/backfolds controlled the development of intermountain basins nearby the main watershed during the Early Pleistocene and seemingly deformed, in the Tiber gorge, a low‐relief landscape developed in the Early Pleistocene (ca. 1.1 Ma). Successively, the upper Tiber River course area and Apennines axial zone underwent a generalized uplift, which is manifested by the deep incision of palaeo‐morphologies. This proposed sequence of events correlates well with the major geodynamic change of the Apennines revealed by an acceleration of uplift rates in the Middle–Late Pleistocene. This latter event may also correlate with increased rates of river incision recorded in Europe as a consequence of uplift and/or climate change. Copyright © 2008 John Wiley & Sons, Ltd.     

Upper crust “boudinage” during post-collisional Miocene extension in Tuscany: Insights from the southern part of the Larderello geothermal area (Northern Apennines,Italy)

A geological study carried out in the southern part of the Larderello geothermal area (Northern Apennines) provides new information on the development mechanism and timing of the earlier extensional structures that formed during the Miocene post-collisional tectonics which affected the orogen. Staircase low-angle normal faults (LANFs) affected a multilayered thickened upper crust after the collisional stage, producing the lateral segmentation of the Tuscan Nappe, the deeper non-metamorphic tectonic unit of the Northern Apennines in the Tuscan area. The tectonic history recorded in two Tuscan Nappe discontinuous bodies revealed that the LANFs took place during the Middle–Late Miocene, displacing collisional structures developed from the Late Oligocene. These Tuscan Nappe bodies are delimited by detachment faults located at the base, within the Tuscan evaporites, and at the top within the Ligurian Units. Their western and eastern margins coincide with east-dipping ramps. These structures and the Tuscan Nappe bodies were later dissected by Pliocene–Quaternary high-angle normal faults. The reconstructed deformation history implies that the Tuscan Nappe bodies are extensional horses developed through an earlier asymmetrical east-dipping extensional duplex system, involved in block faulting during the later, Pliocene-Quaternary, stage of extension.     

龙门山冲断带北段前锋带新生代构造变形

龙门山北段前锋构造的地震剖面解释和前缘盆地内沉积地层的磁组构研究表明前锋构造中发育两期构造挤压作用,即整体强烈的晚三叠世变形和由北向南逐渐减弱的弱新生代构造变形。受这两期构造挤压作用的控制,龙门山北段前锋构造中发育上、下两套构造层,地表构造为晚三叠世时期形成,而深部隐伏构造则形成于新生代。北部的矿山梁和天井山构造几何学上表现为一个双重构造,浅层是一个晚三叠世形成的断层转折褶皱;深层是新生代形成的多个逆冲岩片叠置所构成的隐伏堆垛背斜;南部的青林口和中坝构造主体表现为叠瓦状逆冲,前锋构造是断层转折褶皱和断层传播褶皱。新生代构造冲断位移量以及造成早期构造抬升由北向南逐渐减小,反映新生代变形强度由北向南的减弱。磁组构研究表明新生代变形从龙门山冲断带边缘到盆地内部,磁组构从铅笔状磁组构到初始变形磁组构并逐渐过渡到沉积磁组构。由南向北磁组构由初始变形磁组构转变为铅笔状磁组构,说明应变越来越强,从而进一步证明了龙门山前锋新生代构造的弱变形作用和变形强度的北强南弱分布特征。     

南大巴山冲断构造及其剪切挤压动力学机制

南大巴山是一个形成于T3－K1，滑脱深度小于8－10km 的扬于板块北缘薄皮冲断锲它主要由发育在显生宙地层中台阶状逆断层及断层相关褶皱构成的逆冲岩席、双重推覆体和冲起构造等组成。变形扩展以前列式为主。经平衡地质剖面制作，因冲断南大巴山地壳缩短率平均达49.3％。并以每年约1.28mm 的速率总体缩短约64km，它的成因受控于秦岭碰撞造山过程中扬于板块北缘A型俯冲所提供挤压应力，在向南扩展时，由于古大陆边缘形态不一所诱发的右旋剪切挤压动力学机制。     

Influence of syn-sedimentary faults on orogenic structures in a collisional belt: Insights from the inner zone of the Northern Apennines (Italy)

This paper discusses the possible influence of syn-sedimentary structures on the development of orogenic structures during positive tectonic inversion in the inner Northern Apennines (Italy). Examples from key areas located in southern Tuscany provided original cartographic, structural and kinematics data for Late Oligocene-Early Miocene thrusts, organized in duplex systems, verging in the opposite direction of the foreland propagation (back-thrusts), which affected the Late Triassic-Oligocene sedimentary succession of the Tuscan Domain, previously affected by pre-orogenic structures. These latter consist of mesoscopic-to cartographic-scale Jurassic syn-sedimentary normal faults and extensional structures, which gave rise to effective stratigraphic lateral variation and mechanical heterogeneities. Structural analysis of both syn-sedimentary faults and back-thrusts were therefore compared in order to discuss the possible role of the pre-existing anisotropies in influencing the evolution of the back-thrusts. As a result, it can be reasonably proposed that back-thrusts trajectories and stacking pattern were controlled by relevant syn-sedimentary normal faults; these latter were reactivated, in some cases, if properly oriented. Such an issue adds new inputs for discussing the potential role of structural inheritance during tectonic inversions, and helps to better understand the processes suitable for the development of back-thrusts in the inner zones of orogenic belts, as it is the case of the inner Northern Apennines.     

The effects of pre-existing normal faults on thrust ramp development: An example from the northern Apennines,Italy

The Umbria-Marche foreland fold-and-thrust belt in the northern Apennines of Italy provides excellent evidence to test the hypothesis of synsedimentary-structural control on thrust ramp development. This orogenic belt consists of platform and pelagic carbonates, Late Triassic to Miocene in age, whose deposition was controlled by significant synsedimentary extension. Normal faulting, mainly active from Jurassic through Late Cretaceous-Paleogene time, resulted in significant lateral thickness variability within the related stratigraphic sequences. By Late Miocene time the sedimentary cover was detached from the underlying basement and was deformed by east-verging folds and west-dipping thrusts. Two restored balanced cross sections through the southernmost part of the belt show a coincidence between the early synsedimentary normal faults and the late thrust fault ramps. These evidences suggest that synsedimentary tectonic structures, such as faults and the related lithological lateral changes, can be regarded as mechanically important controlling factors in the process of thrust ramp development during positive tectonic inversion processes.     

Stratigraphy,age and petrography of the Beni Issef successions (External Rif; Morocco): Insights for the evolution of the Maghrebian Chain

In the Beni Issef Massif, nearly 30 km west of Chefchaouen (Morocco), the thickest post-nappe succession within the Rifian sector of the Maghrebian Chain seals the tectonic contact between the Intrarifian External Tanger and Loukkos Units, related to the Rifian External Domain. This succession is very important for the reconstruction of the deformation timing of the Rifian Maghrebids. The age of its base, in fact, is an important constraint for defining an upper boundary to the stacking of both the Intrarifian and Maghrebian Flysch Basin Units, because clasts fed by the Melloussa and Numidian Flysch Nappes are abundant in the conglomerate layers. Field and biostratigraphic analyses pointed out the presence of a Lower Beni Issef Fm, unconformable on the Intrarifian External Tanger and Loukkos Units, and an Upper Beni Issef Fm, unconformable on both the Intrarifian Units and the Lower Beni Issef Fm. The Lower Beni Issef Fm, 150 m thick, consists of lenticular conglomerates with huge blocks in a marly-clayey matrix, followed by marls and minor sandstones. It deposited in a siliciclastic platform, shows a fining upward trend and is affected by metre- to hectometre-sized, locally reversed, folds. Samples collected 45–50 m above the base of the formation resulted not older than Late Tortonian in age, but an older age for the base of the formation cannot be excluded. The Upper Beni Issef Fm, up to 550 m thick, starts with coarse conglomerates followed by medium- to coarse-grained well-bedded sandstones and by grey-blue marls and mudrocks. It indicates deposition in a channelized marine delta, with evolution towards pro-delta pelites, and shows sub-horizontal or gently dipping beds towards the east. Biostratigraphic data indicate a probable Messinian age for this formation. The composition of the arenites of both Lower Beni Issef and Upper Beni Issef Fms is quartzolithic and all samples show a notable content of monocrystalline well-rounded quartz and sedimentary lithic fragments. Detrital modes, all falling in the Quartzose Recycled and Transitional Recycled fields, suggest a provenance from recycling of sedimentary successions, easily recognizable in the Flysch Basin and External Units, mainly the Numidian Nappe sandstones. A Tortonian age of the Lower Beni Issef Fm would agree with the Late Serravallian age of the uppermost beds of the External Tanger Unit and indicate that the most probable age for the stacking of the Intrarifian Units falls in the Late Serravallian-Middle Tortonian time span. The Lower Beni Issef Fm was involved in a compressive tectonic phase testified by north-south striking folds. Later, probably during Messinian, the Upper Beni Issef Fm deposited in a younger intramontane basin, resting on both the Intrarifian Units and the Lower Beni Issef Fm. Successively, the Upper Beni Issef Fm was passively transported piggyback on top of the fold and thrust belt during later tectonic evolution of the Rifian Maghrebids. This tectonic evolution results quite similar to that recognized in the Tellian and Sicilian Maghrebids and also in the southern Apennines.     

Synorogenic basins of central Cuba and collision between the Caribbean and North American plates

The synorogenic basins of central Cuba formed in a collision-related system. A tectono-stratigraphic analysis of these basins allows us to distinguish different structural styles along the Central Cuban Orogenic Belt. We recognize three distinct structural domains: (1) the Escambray Metamorphic Complex, (2) the Axial Zone, and (3) the Northern Deformation Belt. The structural evolution of the Escambray Metamorphic Complex includes a latest Cretaceous compressional phase followed by a Palaeogene extensional phase. Contraction created an antiformal stack in a subduction environment, and extension produced exhumation in an intra-arc setting. The Axial Zone was strongly deformed and shortened from the latest Cretaceous to Eocene. Compression occurred in an initial phase and subsequent transpressive deformation took place in the middle Eocene. The Northern Deformation Belt consists of a thin-skinned thrust fault system formed during the Palaeocene to middle Eocene; folding and faulting occurred in a piggyback sequence with tectonic transport towards the NNE. In the Central Cuban Orogenic Belt, some major SW–NE structures are coeval with the Cuban NW–SE striking folds and thrusts, and form tectonic corridors and/or transfer faults that facilitated strain-partitioning regime attending the collision. The shortening direction rotated clockwise during deformation from SSW–NNE to WSW–ENE. The synchronicity of compression in the north with extension in the south is consistent with the opening of the Yucatan Basin; the evolution from compression–extension to transpression is in keeping with the increase in obliquity in the collision between the Caribbean and North American plates.     

Luminescence dating of Late Pleistocene faults as evidence of uplift and active tectonics in Sardinia,W Mediterranean

Precise dating of the activity of Late Pleistocene to Holocene neo‐tectonic structures is crucial to quantify the rate of deformation in low‐seismicity regions. Sardinia is a relatively stable continental fragment set in the middle of the tectonically active Western Mediterranean belt. This paper provides evidences of significant uplift of northwest Sardinia that support an ongoing tectonic activity since the Marine Isotopic Stage 7 (MIS 7; ca. 220 ka). In particular, it documents for the first time Late Pleistocene to Holocene tectonics based on luminescence dating of travertine sealing a major NNE‐SSW fault.     

山西太古代——中生代构造应力场

本文采用历史分析与力学分析相结合的原则,研究山西太古代至中生代五次主要构造运动的形变特征、主应力方向及分布规律。中太古代晚期（阜平运动）以SSW向挤压为主;晚太古代末期（五台运动）、早元古代末期（吕粱运动）和侏罗纪（燕山运动）受SE—SEE向挤压;白垩纪（四川运动）以SSW向挤压为特征。五次构造运动的最大主压应力均呈近水平方向。     

Differential Hydrocarbon Accumulation Controlled by Structural Styles along the Southern and Northern Tianshan Thrust Belt

The Kuqa and the Southern Junggar foreland thrust belts, which lie to the southern and northern Tianshan, respectively, were formed under a strong compressional tectonic setting. Due to the differential propagation and deformation under the control of the décollement horizon, the structural deformation styles differ in the Kuqa and Southern Junggar thrust belts. Imbricated stacking is developed in the Kuqa thrust belt, forming a piggyback imbricated pattern of faulted anticline and fault-block structural assemblage dominated by salt structures. In contrast, wedge-shaped thrusts are developed in Southern Junggar, mainly forming vertical laminated patterns of multi-wedge-structure stacks strongly influenced by the décollement horizons. The different deformation patterns and structural styles of the north and south of Tian Shan control the contrasting characteristics of hydrocarbon accumulation in the foreland thrust belts of the Kuqa and the Southern Junggar thrust belts, including the variance in the hydrocarbon trap types, pathway systems and hydrocarbon-bearing horizons. Proven by the hydrocarbon accumulation research and exploration achievements, recent exploration targets should focus on sub-salt piggyback imbricated structural patterns in the Kuqa and the deep laminated patterns in the Southern Junggar thrust belt.     

雪峰山西部中生代厚皮逆冲推覆构造样式与变形特征研究

雪峰山厚皮逆冲推覆构造带位于扬子地块东南缘,由南向北,主构造线走向由北北东向渐变为北东东向,形成向北西突出的弧形。构造带内基底新元古界板溪群大面积出露,这些基底出露的原因和构造方式是华南中生代大地构造分析的核心问题之一。以野外构造解析为基础,结合相关地球物理资料解释,对雪峰山西部逆冲推覆构造的构造样式与变形序列进行了系统的解析。结果表明,雪峰山构造带从印支期开始发育由南东向北西的大规模的逆冲推覆构造,逆冲断层在近地表向南东陡倾,向下逐渐收敛于基底内的滑脱断层之上。基底新元古界板溪群及早古生界均卷入了推覆构造,同时逆冲覆盖于中生代地层之上,形成厚皮构造,并造成了基底板溪群的大面积出露。     

Tectonic role of ophiolite-bearing terranes in the development of the Southern Apennines orogenic belt

New data on ophiolite-bearing terranes of the Liguride Complex, together with some information on the terranes of the Sicilide Complex, result in a better understanding of the role and tectonic significance of these units in the construction of the Southern Apennines orogenic belt. The Liguride Complex is composed of two main tectonic units overlain by a thick turbiditic sequence of Late Oligocene-Middle Miocene age. The uppermost one (Frido Unit) is a polydeformed and polymetamorphosed sequence, composed of two tectonic subunits of shales and calc-schists, respectively, containing blocks of ophiolite, garnet gneiss, amphibolites and granitoids. This unit is thrust over the un-metamorphosed terranes (Calabro–Lucano Flysch Unit) consisting of a broken formation with blocks of Late Jurassic ophiolite and their sedimentary cover, Cretaceous-Eocene pelagic sediments and Late Oligocene volcaniclastic deposits. The Frido Unit underwent HP/LT metamorphism (P= 8–10 Kb; T= 400–500 °C) resulting in glaucophane and lawsonite assemblages in the ophiolitic rocks and aragonite in the meta-limestones and calc-schists, followed by greenschist fades metamorphism (P= 4 Kb; T= 300–350 °C). From a structural point of view units of the Liguride Complex comprise structures developed at different structural levels, indicating progressive non-coaxial deformation in response to tectonic transport towards the N-NE. The ophiolite-bearing terranes of the Liguride Complex can be considered as a remnant of an accretionary complex in which the Calabro Lucano Flysch Unit represents the toe of the wedge where frontal accretion processes occur and the Frido Unit is a deeper portion. Emplacement of the Frido Unit is explained as being due to formation of a deep duplex structure during the early stage of continental collision processes. The polarity of tectonic transport provides new evidence that the Liguride Complex represents a suture zone between the Apulian and the Calabrian blocks. The age of collision appears to be not older than late Oligocene. The allochtonous terranes of the Liguride and Sicilide Complexes, therefore, represent a complete accretionary wedge which records, first, subduction of the Neotethys ocean beneath the Calabrian (Europe) continental margin and, later, continental collision with the African block.     

Structural development of the Neogene Radicondoli–Volterra and adjoining hinterland basins in Western Tuscany (Northern Apennines,Italy)

This paper presents a geological–structural study of some Neogene hinterland basins of the Northern Apennines, located on the Tyrrhenian side of the chain. These basins developed on the already delineated thrust-fold belt from middle–late Tortonian times. Their evolution has been commonly referred to an extensional tectonic regime, related to the opening of the Tyrrhenian Sea. New data have allowed us to hypothesize a different tectonic evolution for the chain, where compressive tectonics plays a major role both in the external and in the hinterland area. In this frame, the hinterland area located west of a major outcropping crustal thrust (Mid-Tuscany Metamorphic Ridge) has been the target of a geological–structural investigation. The field mapping and structural analysis has been focused on the syntectonic sediments of the Radicondoli–Volterra basin as well as on adjoining minor basins. These basins commonly display a synclinal structure and are generally located in between basement culminations, probably corresponding to thrust anticlines. Sediments of the hinterland basins have been affected by compressive deformation and regional unconformities separate stratigraphic units due to the activity of basement thrusts. In the study area, normal faulting either accommodates the thrusting processes or post-dates compressive deformation. A chronology of faulting and a six-stage evolution of this area are presented, providing further insights for the Neogene tectonic evolution of the Northern Apennines. Copyright © 1998 John Wiley & Sons, Ltd.     

Alpine tectonics in the Calabrian–Peloritan belt (southern Italy): New 40Ar/39Ar data in the Aspromonte Massif area

This study provides new ⁴⁰Ar/³⁹Ar geochronological constraints on the age of the Alpine tectonics in the Aspromonte Massif (southern part of the Calabrian–Peloritan belt). This massif exposes the upper units of the Calabride Complex which originated from the European continental margin. The Calabride Complex was incorporated in the Alpine orogenic wedge and then integrated into the Apennines and Maghrebides fold-and-thrust belts. Throughout the Calabride Complex there is evidence for a two stage tectonic history, which remains however rather poorly dated: Alpine nappe stacking is followed by extensional reworking along the former thrust contacts or along new detachment surfaces. Our new ages suggest that exhumation of the uppermost units, which accompanied nappe stacking, probably started at 45 Ma and that the deepest units were almost completely exhumed at 33 Ma. This kinematics probably corresponds to syn-orogenic extension while the end of exhumation is clearly related to the extensional tectonics dated at 28.6 Ma along detachment structures.Our geochronological data reveal a very short lag time between accretional and extensional processes in this part of the Mediterranean Alpine orogenic belt. The direction of extension, when the units are restored to their initial position (i.e. before the opening of the Western Mediterranean basins and the bending of the arc) is NNE–SSW. Such a direction does not fit with the eastward slab-retreat model generally put forward to explain extension in the Western Mediterranean. In contrast, we provide evidence for roughly N–S middle Oligocene extension in the accretionary prism, not previously described in this part of the Mediterranean domain.     

Lower Oligocene thrust-system in the epi-Ligurian succession: evidence from the Enza Valley (northern Apennines,Italy)

Within the lower part (Upper Eocene-Oligocene) of the epi-Ligurian succession, outcropping in the Emilian side of the northern Apennines (Enza Valley), duplications by thrust tectonics were recognized through the systematic integration of field geology with calcareous nannofossil biostratigraphy. This thrust system, derived from the overthrusting of two thrust-sheets over a footwall, is unconformably overlain by a Rupelian succession. The thrust structure of the Enza Valley, affected by a subsequent wide overturned syncline together vith the unconformable succession, shows a remarkable Lower Oligocene contractional tectonics, previously not recognized in the northern Apennines.The comparison of this thrust system with other outcropping areas of the epi-Ligurian succession makes probable the wide-spread occurrence of the Lower Oligocene tectonics in the uppermost structural levels of the chain (epi-Ligurian domain).In a regional tectonic framework, the Rupelian thrust tectonics affecting the epi-Ligurian succession can be related to the Lower Oligocene closure of the innermost portion of the Subligurian basin (Aveto-Petrignacola Formation) due to the NE-verging overthrusting of the External Ligurian Units. In this context the unconformable succession of the Enza Valley seems correlable with the basal portion of the Subligurian Eratica Sandstone (Rupelian-Chattian) which unconformably overlies a deformed substratum (Mesoalpine Phase).     

Extensional deformation structures within a convergent orogen: The Val di Lima low-angle normal fault system (Northern Apennines,Italy)

A low-angle extensional fault system affecting the non metamorphic rocks of the carbonate dominated Tuscan succession is exposed in the Lima valley (Northern Apennines, Italy). This fault system affects the right-side-up limb of a kilometric-scale recumbent isoclinal anticline and is, in turn, affected by superimposed folding and late-tectonic high-angle extensional faulting.The architecture of the low-angle fault system has been investigated through detailed structural mapping and damage zone characterization. Pressure-depth conditions and paleofluid evolution of the fault system have been studied through microstructural, mineralogical, petrographic, fluid inclusion and stable isotope analyses. Our results show that the low-angle fault system was active during exhumation of the Tuscan succession at about 180°C and 5 km depth, with the involvement of low-salinity fluids. Within this temperature - depth framework, the fault zone architecture shows important differences related to the different lithologies involved in the fault system and to the role played by the fluids during deformation. In places, footwall overpressuring influenced active deformation mechanisms and favored shear strain localization.Our observations indicate that extensional structures affected the central sector of the Northern Apennines thrust wedge during the orogenic contractional history, modifying the fluid circulation through the upper crust and influencing its mechanical behavior.     

塔里木盆地东南缘新生代构造变形特征研究

塔里木盆地东南缘新生代变形特征研究对探讨阿尔金构造带新生代的活动特征及阿尔金构造带与西昆仑构造带的相互作用具有重要意义。本文在野外地质调查的基础上,结合地球物理和沉积学资料,探讨了塔里木盆地东南缘的新生代变形及演化特征。塔里木盆地东南缘新生代构造变形受西昆仑构造带、阿尔金构造带和车尔臣断裂带的控制,且变形由西向东减弱。西南部的构造样式主要表现为受西昆仑向北冲断作用控制的冲断构造;东南部为受阿尔金断层走滑作用控制的走滑-冲断构造;而北部则为受车尔臣断层走滑作用控制的基底卷入走滑-冲断构造。中新世,盆地东南缘受西昆仑构造带大规模的冲断活动影响,导致民丰山前盆地挠曲沉降和冲断层发育,而车尔臣断裂仅有微弱活动;上新世开始,构造变形扩展到整个研究区,不仅西昆仑构造带和车尔臣断裂带表现出强烈变形,而且阿尔金断层走滑作用强烈,导致北侧次级断层的强烈走滑冲断作用和若羌山前挤压挠曲盆地的形成。新生代时期,西昆仑构造带北向冲断作用要早于阿尔金构造带的走滑变形,阿尔金构造带的走滑作用对西昆仑构造带北向冲断构造有强烈的改造。     

The Ligurian Helminthoid flysch units of the Emilian Apennines: stratigraphic and petrographic features,paleogeographic restoration and structural evolution

Abstract

This work deals with the Cretaceous-Tertiary Helminthoid flysch successions of the Emilian Apennines and related basal complexes (Mt. Caio, Val Baganza, Solignano, Mt. Venere-Monghidoro and Mt. Cassio Units): it is based on an integrated approach which included stratigraphic, petrographic and structural observations. Detailed stratigraphic sections measured in the various successions evidenced the specific features of the different flysch formations. The main framework composition analysis of the arenites pointed out a partly ‘oceanic’ alimentation for the Mt. Caio Flysch Fm; the Mt. Venere-Monghidoro, and Mt. Cassio Flysch Fms have been alimented exclusively by a terrigenous detritus mainly derived from continental basement source areas. The heavy mineral assemblage of the Mt. Caio Flysch Fm is characterized by picotite, that of the Mt. Venere-Monghidoro, Solignano and Mt. Cassio Flysch Fms commonly contains straurolite, garnet and chloritoid, generally considered to be typical products of the Adriatic continental margin. The calcareous nannofossils biostratigraphy indicated that the flysch sedimentation started during the Late Campanian and ended between the Paleocene (Mt. Cassio Flysch Fm and Mt. Venere-Monghidoro Fms) and the Middle Eocene (Mt. Caio Flysch Fm). We propose a schematic paleogeographic restoration for the External Ligurian Domain which implies a more internal position for the Mt. Caio succession and a more external one for the Mt. Venere-Monghidoro and Mt. Cassio successions. The Helminthoid flyschs sedimented after and during deformation and subduction phases in perched and fore-arc basins partly overlying the marginal part of the Adriatic plate. The External Ligurian nappes’ stacking consists, in the study area, from the bottom, of the following units: Caio Unit, Val Baganza Ophiolitic Unit, Monghidoro Unit, Cassio Unit. This pile of thrust-nappes, sealed by the Epiligurian succession, has been already realized before Late Eocene. In our opinion it was generated by a frontal west-verging frontal accretion process (offscraping), which let the flysch successions remain, in this phase, quite undeformed. This westverging thrusting phase, starting from the Middle-Late Eocene, has been followed by an important folding event which generated striking hectometric and kilometric ‘Apenninic’ reverse folds, sometimes associated with NE-verging thrust surfaces. The Oligocene and post-Oligocene evolution is characterized by a block-translation of the Ligurian staking over the Subligurian, Tuscan and Umbrian Domains, associated with a new generation of minor thrusts and thrust related Apenninic folds. © 2000 Éditions scientifiques et médicales Elsevier SAS