The ratio between corner frequencies of source spectra of <Emphasis Type="Italic">P</Emphasis>- and <Emphasis Type="Italic">S</Emphasis>-waves—a new discriminant between earthquakes and quarry blasts

This study analyzes and compares the P- and S-wave displacement spectra from local earthquakes and explosions of similar magnitudes. We propose a new approach to discrimination between low-magnitude shallow earthquakes and explosions by using ratios of P- to S-wave corner frequencies as a criterion. We have explored 2430 digital records of the Israeli Seismic Network (ISN) from 456 local events (226 earthquakes, 230 quarry blasts, and a few underwater explosions) of magnitudes Md?=?1.4–3.4, which occurred at distances up to 250 km during 2001–2013 years. P-wave and S-wave displacement spectra were computed for all events following Brune’s source model of earthquakes (1970, 1971) and applying the distance correction coefficients (Shapira and Hofstetter, Teconophysics 217:217–226, 1993; Ataeva G, Shapira A, Hofstetter A, J Seismol 19:389-401, 2015), The corner frequencies and moment magnitudes were determined using multiple stations for each event, and then the comparative analysis was performed.The analysis showed that both P-wave and especially S-wave displacement spectra of quarry blasts demonstrate the corner frequencies lower than those obtained from earthquakes of similar magnitudes. A clear separation between earthquake and explosion populations was obtained for ratios of P- to S-wave corner frequency f ₀(P)/f ₀(S). The ratios were computed for each event with corner frequencies f ₀ of P- and S-wave, which were obtained from the measured f ₀ ^I at individual stations, then corrected for distance and finally averaged. We obtained empirically the average estimation of f ₀(P)/f ₀(S)?=?1.23 for all used earthquakes, and 1.86 for all explosions. We found that the difference in the ratios can be an effective discrimination parameter which does not depend on estimated moment magnitude M _w .The new multi-station Corner Frequency Discriminant (CFD) for earthquakes and explosions in Israel was developed based on ratios P- to S-wave corner frequencies f ₀(P)/f ₀(S), with the empirical threshold value of the ratio for Israel as 1.48.     

Long-period irregular pulsations under the conditions of a quiet magnetosphere

Simultaneous observations of high-latitude long-period irregular pulsations at frequencies of 2.0–6.0 mHz (ipcl) and magnetic field disturbances in the solar wind plasma at low geomagnetic activity (Kp ~ 0) have been studied. The 1-s data on the magnetic field registration at Godhavn (GDH) high-latitude observatory and the 1-min data on the solar wind plasma and IMF parameters for 2011–2013 were used in an analysis. Ipcl (irregular pulsations continuous, long), which were observed against a background of the IMF Bz reorientation from northward to southward, have been analyzed. In this case other solar wind plasma and IMF parameters, such as velocity V, density n, solar wind dynamic pressure P = ρV² (ρ is plasma density), and strength magnitude B, were relatively stable. The effect of the IMF Bz variation rate on the ipcl spectral composition and intensity has been studied. It was established that the ipcl spectral density reaches its maximum (~10–20 min) after IMF Bz sign reversal in a predominant number of cases. It was detected that the ipcl average frequency (f) is linearly related to the IMF Bz variation rate (ΔBz/Δt). It was shown that the dependence of f on ΔBz/Δt is controlled by the α = arctan(By/Bx) angle value responsible for the MHD discontinuity type at the front boundary of magnetosphere. The results made it possible to assume that the formation of the observed ipcl spectrum, which is related to the IMF Bz reorientation, is caused by solar wind plasma turbulence, which promotes the development of current sheet instability and surface wave amplification at the magnetopause.     

Winter anomaly of the <Emphasis Type="Italic">E</Emphasis>-layer critical frequency in the nighttime auroral zone

Analysis of the annual variation of the E-layer critical frequency median foE in the nighttime (22?02 LT) auroral zone by the data of several stations of the Northern Hemisphere has shown the median maximum in winter and minimum in summer, even though the summer contribution of solar radiation to foE is greater. Thus, a new phenomenon was discovered—an foE median winter anomaly in the nighttime auroral zone. Its amplitude (ratio of winter to summer foE figures) can reach 10–15%; however, this anomaly was weakly expressed and statistically insignificant at particular stations located in the auroral zone. The winter anomaly is more distinct for foE _avr, the median of the E-layer critical frequency foE caused by the auroral source of atmospheric ionization, i.e., excluding the solar radiation contribution to foE. For foE _avr, the amplitude of the winter anomaly can reach 15–20%. Based on the qualitative analysis, it has been found that foE winter anomaly is stipulated by the winter/summer asymmetry of energy flow of accelerated electrons, which induce discrete aurorae in the nighttime auroral zone.     

An adaptive modal pushover analysis procedure (<Emphasis Type="Italic">VMPA</Emphasis>-<Emphasis Type="Italic">A</Emphasis>) for buildings subjected to bi-directional ground motions

A new modal pushover analysis procedure (VMPA-A) is developed and implemented in MATLAB code for three-dimensional buildings subjected to bidirectional ground motions. VMPA-A uses stepwise force patterns to represent changes in the dynamic characteristics because of the accumulated structural damages. The hybrid-spectrum concept is introduced to account for the bidirectional ground motion effects. Due to enactments of the equal displacement rule and the secant stiffness-based linearization process, nonlinear analysis is performed for specific displacement targets without stipulation of full modal capacity curves for each mode. Horizontal components of an earthquake record are considered simultaneously, and the consistency between the force and displacement vectors for each mode is provided. These are the main advantages of the proposed procedure against modal pushover analysis (MPA). An existing 21-story reinforced concrete building is analyzed to exemplify VMPA-A. The response parameters such as displacements, story drifts, internal forces, strains, etc. are discussed by comparing the results of VMPA-A with nonlinear time history analyses, which is accepted as the “exact solution”. Though consistent demand estimations are obtained for story drifts, displacements and deformations, some conservative results are obtained for story shears.     

Seismic source zoning and maximum credible earthquake prognosis of the Greater Kashmir Territory,NW Himalaya

We present the seismic source zoning of the tectonically active Greater Kashmir territory of the Northwestern Himalaya and seismicity analysis (Gutenberg-Richter parameters) and maximum credible earthquake (m _max) estimation of each zone. The earthquake catalogue used in the analysis is an extensive one compiled from various sources which spans from 1907 to 2012. Five seismogenic zones were delineated, viz. Hazara-Kashmir Syntaxis, Karakorum Seismic Zone, Kohistan Seismic Zone, Nanga Parbat Syntaxis, and SE-Kashmir Seismic Zone. Then, the seismicity analysis and maximum credible earthquake estimation were carried out for each zone. The low b value (<1.0) indicates a higher stress regime in all the zones except Nanga Parbat Syntaxis Seismic Zone and SE-Kashmir Seismic Zone. The m _max was estimated following three different methodologies, the fault parameter approach, convergence rates using geodetic measurements, and the probabilistic approach using the earthquake catalogue and is estimated to be M _w 7.7, M _w 8.5, and M _w 8.1, respectively. The maximum credible earthquake (m _max) estimated for each zone shows that Hazara Kashmir Syntaxis Seismic Zone has the highest m _max of M _w 8.1 (±0.36), which is espoused by the historical 1555 Kashmir earthquake of M _w 7.6 as well as the recent 8 October 2005 Kashmir earthquake of M _w 7.6. The variation in the estimated m _max by the above discussed methodologies is obvious, as the definition and interpretation of the m _max change with the method. Interestingly, historical archives (～900 years) do not speak of a great earthquake in this region, which is attributed to the complex and unique tectonic and geologic setup of the Kashmir Himalaya. The convergence is this part of the Himalaya is distributed not only along the main boundary faults but also along the various active out-of-sequence faults as compared to the Central Himalaya, where it is mainly adjusted along the main boundary fault.     

Behavior of Parameters of Enhancements in the Nighttime Electron Concentration in the Ionospheric <Emphasis Type="Italic">F</Emphasis>2 Layer

We have analyzed the behavior of the F2 layer parameters during nighttime periods of enhanced electron concentration by the results of vertical sounding of the ionosphere carried out with five-minute periodicity in Almaty (76°55′ E, 43°15′ N) in 2001–2012. The results are obtained within the frameworks of the unified concept of different types of ionospheric plasma disturbances manifested as variations in the height and half-thickness of the layer accompanied by an increase and decrease of N _m F2 at the moments of maximum compression and expansion of the layer. A good correlation is found between height h _Am , which corresponds to the maximum increase, and layer peak height h _m F, while h _Am is always less than h _m F. The difference between h _Am and h _m F linearly increases with increasing h _m F. Whereas the difference is ~38 km for h _m F = 280 km, it is ~54 km for h _m F = 380 km. Additionally, the correlation is good between the increase in the electron concentration in the layer maximum ΔN _m and the maximum enhancement at the fixed height ΔN; the electron concentration enhancement in the layer maximum is about two to three times lower than its maximum enhancement at the fixed height.     

Earthquake hazard and risk assessment based on Unified Scaling Law for Earthquakes: Greater Caucasus and Crimea

We continue applying the general concept of seismic risk analysis in a number of seismic regions worldwide by constructing regional seismic hazard maps based on morphostructural analysis, pattern recognition, and the Unified Scaling Law for Earthquakes (USLE), which generalizes the Gutenberg-Richter relationship making use of naturally fractal distribution of earthquake sources of different size in a seismic region. The USLE stands for an empirical relationship log₁₀N(M, L)?=?A?+?B·(5 – M)?+?C·log₁₀L, where N(M, L) is the expected annual number of earthquakes of a certain magnitude M within a seismically prone area of linear dimension L. We use parameters A, B, and C of USLE to estimate, first, the expected maximum magnitude in a time interval at seismically prone nodes of the morphostructural scheme of the region under study, then map the corresponding expected ground shaking parameters (e.g., peak ground acceleration, PGA, or macro-seismic intensity). After a rigorous verification against the available seismic evidences in the past (usually, the observed instrumental PGA or the historically reported macro-seismic intensity), such a seismic hazard map is used to generate maps of specific earthquake risks for population, cities, and infrastructures (e.g., those based on census of population, buildings inventory). The methodology of seismic hazard and risk assessment is illustrated by application to the territory of Greater Caucasus and Crimea.     

Simulating and mapping the risk of surge floods in multiple typhoon scenarios: a case study of Yuhuan County,Zhejiang Province,China

We propose a scenario-based method for simulating and mapping the risk of surge floods for use by local authorities concerned with public safety and urban planning in coastal areas. Focusing on the triad of hazard, vulnerability and adaptation capability, we estimate the comprehensive risk and display its spatial distribution using the raster calculation tool in ArcGIS. The detailed methodology is introduced via a case study of Yuhuan, an island county in Zhejiang Province, China, which is frequently affected by typhoon storm surges. First, we designed 24 typhoon scenarios and modeled the flood process in each scenario using the hydrodynamic module of MIKE 21. Second, flood depth and area were used for hazard assessment; an authorized indicator system of land use categories and a survey of emergency shelters were used for vulnerability and adaptation capability assessment, respectively; and a quantified model was used for assessment of the comprehensive risk. Lastly, we used the GIS raster calculation tool for mapping the risk of storm surges in multiple typhoon scenarios. Our principal findings are as follows: (1) Seawalls are more likely to be overtopped or destroyed by more severe storm surges with increasing typhoon intensity. (2) Most of the residential areas with inadequate emergency shelters are highly vulnerable to flood events. (3) As projected in the risk mapping, if an exceptional typhoon with a central pressure of 915 or 925 hPa made a landfall in Yuhuan, a wide range of areas would be flooded and at high risk. (4) Determining optimal strategies based on identification of risk-inducing factors is the most effective way of promoting safe and sustainable development in coastal cities.     

Precursor times of abnormal <Emphasis Type="Italic">b</Emphasis>-values prior to mainshocks

Seismic observations exhibit the presence of abnormal b-values prior to numerous earthquakes. The time interval from the appearance of abnormal b-values to the occurrence of mainshock is called the precursor time. There are two kinds of precursor times in use: the first one denoted by T is the time interval from the moment when the b-value starts to increase from the normal one to the abnormal one to the occurrence time of the forthcoming mainshock, and the second one denoted by T _p is the time interval from the moment when the abnormal b-value reaches the peak one to the occurrence time of the forthcoming mainshock. Let T* be the waiting time from the moment when the abnormal b-value returned to the normal one to the occurrence time of the forthcoming mainshock. The precursor time, T (usually in days), has been found to be related to the magnitude, M, of the mainshock expected in a linear form as log(T)?=?q?+?rM where q and r are the coefficient and slope, respectively. In this study, the values of T, T _p , and T* of 45 earthquakes with 3?≤?M?≤?9 occurred in various tectonic regions are compiled from or measured from the temporal variations in b-values given in numerous source materials. The relationships of T and T _p , respectively, versus M are inferred from compiled data. The difference between the values of T and T _p decreases with increasing M. In addition, the plots of T*/T versus M, T* versus T, and T* versus T-T* will be made and related equations between two quantities will be inferred from given data.     

A different method for interpretation of magnetic anomalies due to 2-D dipping dikes

In this study a new method is presented to determine model parameters from magnetic anomalies caused by dipping dikes. The proposed method is applied by employing only the even component of the anomaly. First, the maximum of the even component is divided to its value at any distance x in order to obtain S1. Then, theoretical even component values are computed for the minimal depth (h) and half-width (b) values. S2 is obtained by dividing their maximum to the value computed for the same distance x. A set of S2 values is calculated by slowly increasing the half-width, and h and b for the S2 closest to S1 are determined. The same procedure is repeated by increasing the depth. The determined b values are plotted against the corresponding values of h. After repeating the process and plotting curves for different distances, it is possible to determine the actual depth and half-width values.     

Understanding single-station ground motion variability and uncertainty (sigma): lessons learnt from EUROSEISTEST

Accelerometric data from the well-studied valley EUROSEISTEST are used to investigate ground motion uncertainty and variability. We define a simple local ground motion prediction equation (GMPE) and investigate changes in standard deviation (σ) and its components, the between-event variability (τ) and within-event variability (φ). Improving seismological metadata significantly reduces τ (30–50%), which in turn reduces the total σ. Improving site information reduces the systematic site-to-site variability, φ _S2S (20–30%), in turn reducing φ, and ultimately, σ. Our values of standard deviations are lower than global values from literature, and closer to path-specific than site-specific values. However, our data have insufficient azimuthal coverage for single-path analysis. Certain stations have higher ground-motion variability, possibly due to topography, basin edge or downgoing wave effects. Sensitivity checks show that 3 recordings per event is a sufficient data selection criterion, however, one of the dataset’s advantages is the large number of recordings per station (9–90) that yields good site term estimates. We examine uncertainty components binning our data with magnitude from 0.01 to 2 s; at smaller magnitudes, τ decreases and φ _SS increases, possibly due to κ and source-site trade-offs Finally, we investigate the alternative approach of computing φ _SS using existing GMPEs instead of creating an ad hoc local GMPE. This is important where data are insufficient to create one, or when site-specific PSHA is performed. We show that global GMPEs may still capture φ _SS , provided that: (1) the magnitude scaling errors are accommodated by the event terms; (2) there are no distance scaling errors (use of a regionally applicable model). Site terms (φ _S2S ) computed by different global GMPEs (using different site-proxies) vary significantly, especially for hard-rock sites. This indicates that GMPEs may be poorly constrained where they are sometimes most needed, i.e., for hard rock.     

Critical frequencies <Emphasis Type="Italic">foF</Emphasis>2 as an indicator of trends in thermospheric dynamics

The time variations in three parameters during the last decades are considered. R(foF2) is the correlation coefficient between the nighttime and daytime values of foF2 for the same day. Stable trends are found for the minimum (R(foF2)(max)) and maximum (R(foF2)(min)) values of R(foF2) during a year. The foF2(night)/foF2(day) ratio demonstrates both, negative and positive trends, and the trend sign depends on the inclination I and declination D of the magnetic field. The correlation coefficient r(h, fo) between foF2 and the 100 hP level in the stratosphere demonstrates a decrease (in the years of maximum and minimum solar activity) from the 1980s to the 1990s. The trends in all three groups of data are considered under the assumption of long-term changes in the circulation in the upper atmosphere.     

Limits of transversely isotropic elastic parameters for the existence of classical Rayleigh waves

Solutions of P-SV equations of motion in a homogeneous transversely isotropic elastic layer contain a factor exp(±ν _j z), where z is the vertical coordinate and j?=?1, 2. For computing Rayleigh wave dispersion in a multi-layered half space, ν _j is computed at each layer. For a given phase velocity (c), ν _j becomes complex depending on the transversely isotropic parameters. When ν _j is complex, classical Rayleigh waves do not exist and generalised Rayleigh waves propagate along a path inclined to the interface. We use transversely isotropic parameters as α _H , β _V , ξ, ? and η and find their limits beyond which ν _j becomes complex. It is seen that ν _j depends on ? and η, but does not depend on ξ. The complex ν _j occurs when ? is small and η is large. For a given c/β _V , the region of complex ν _j in a ? -η plane increases with the increase of α _H /β _V . Further, for a given α _H /β _V , the complex region of ν _j increases significantly with the decrease of c/β _V . This study is useful to compute dispersion parameters of Rayleigh waves in a layered medium.     

Sampling uncertainties and source <Emphasis Type="Italic">b</Emphasis> likelihood for the Gutenberg-Richter <Emphasis Type="Italic">b</Emphasis> value from the Aki-Utsu method

The Aki-Utsu method of Gutenberg-Richter (G-R) b value estimation is often misapplied so that estimations not using the G-R histogram are often meaningless because they are not based on adequate samples. We propose a method to estimate the likelihood Pr(b?b _m , N, M ₁, M ₂) that an observed b _m estimate, based on a sample of N magnitudes within an [M ₁????≤?ΔM/2,?M ₂?+?ΔM/2) range, where ΔM?=?0.1 is the usual rounding applied to magnitudes, is due to a “true” source b value, b, and use these likelihoods to estimate source b ranges corresponding to various confidence levels. As an example of application of the method, we estimate the b values before and after the occurrence of a 7.4-magnitude earthquake in the Mexican subduction zone, and find a difference of 0.82 between them with 100% confidence that the b values are different.     

Improved random noise attenuation using <Emphasis Type="Italic">f</Emphasis>−<Emphasis Type="Italic">x</Emphasis> empirical mode decomposition and local similarity

Conventional f?x empirical mode decomposition (EMD) is an effective random noise attenuation method for use with seismic profiles mainly containing horizontal events. However, when a seismic event is not horizontal, the use of f?x EMD is harmful to most useful signals. Based on the framework of f?x EMD, this study proposes an improved denoising approach that retrieves lost useful signals by detecting effective signal points in a noise section using local similarity and then designing a weighting operator for retrieving signals. Compared with conventional f?x EMD, f?x predictive filtering, and f?x empirical mode decomposition predictive filtering, the new approach can preserve more useful signals and obtain a relatively cleaner denoised image. Synthetic and field data examples are shown as test performances of the proposed approach, thereby verifying the effectiveness of this method.     

Selecting time windows of seismic phases and noise for engineering seismology applications: a versatile methodology and algorithm

Seismic signal windowing is the preliminary step for many analysis procedures in engineering seismology (standard spectral ratio, quality factor, general inversion techniques, etc.). Moreover a noise window is often necessary for the data quality control through the signal-to-noise verification. Selecting the noise window can be challenging when large heterogeneous datasets are considered, especially when they include short pre-event noise signals. This study proposes a fully automatic and configurable (i.e., with default parameters that can also be user-defined) algorithm to windowing the noise and the P, S, coda and full signal once the P-wave (T _P ) and S-wave (T _S ) first arrivals are known. An application example is given on a KiK-net dataset. A Matlab language implementation of this algorithm is proposed as an online resource.     

Frictional and viscous effects on the nucleation phase of an earthquake

We study the frictional and viscous effects on earthquake nucleation, especially for the nucleation phase, based on a one-degree-of-freedom spring-slider model with friction and viscosity. The frictional and viscous effects are specified by the characteristic displacement, U _c, and viscosity coefficient, η, respectively. Simulation results show that friction and viscosity can both lengthen the natural period of the system and viscosity increases the duration time of motion of the slider. Higher viscosity causes a smaller amplitude of lower velocity motion than lower viscosity. A change of either U _c (under large η) or η (under large U _c) from a large value (U _ch for U _c and η _h for η) to a small one (U _cl for U _c and η _l for η) in two stages during sliding can result in a clear nucleation phase prior to the P-wave. The differences δU _c = U _ch ? U _cl and δη = η _h ? η _l are two important factors in producing a nucleation phase. The difference between the nucleation phase and the P-wave increases with either δU _c or δη. Like seismic observations, the peak amplitude of P-wave, which is associated with the earthquake magnitude, is independent upon the duration time of nucleation phase. A mechanism specified with a change of either η or U _c from a larger value to a smaller one due to temporal variations in pore fluid pressure and temperature in the fault zone based on radiation efficiency is proposed to explain the simulation results and observations.     

Shape and position of Earth’s bow shock near-lunar orbit based on ARTEMIS data

Earth’s bow shock is the result of interaction between the supersonic solar wind and Earth’s magnetopause. However, data limitations mean the model of the shape and position of the bow shock are based largely on near-Earth satellite data. The model of the bow shock in the distant magnetotail and other factors that affect the bow shock, such as the interplanetary magnetic field (IMF) B_y, remain unclear. Here, based on the bow shock crossings of ARTEMIS from January 2011 to January 2015, new coefficients of the tail-flaring angle α of the Chao model (one of the most accurate models currently available) were obtained by fitting data from the middle-distance magnetotail (near-lunar orbit, geocentric distance -20R_E>X>-50R_E). In addition, the effects of the IMF B_y on the flaring angle α were analyzed. Our results showed that: (1) the new fitting coefficients of the Chao model in the middle-distance magnetotail are more consistent with the observed results; (2) the tail-flaring angle α of the bow shock increases as the absolute value of the IMF B_y increases. Moreover, positive IMF B_y has a greater effect than negative IMF B_y on flaring angle. These results provide a reference for bow shock modeling that includes the IMF B_y.     

An experimental study on variation of <Emphasis Type="Italic">b</Emphasis> value during deformation of rock samples with different structural models

A preliminary study of b value of rocks with two kinds of structural models has been made on the base of a new acoustic emission recording system. It shows that b value of the sample decreases obviously when the sample with compressive en echelon faults changes into a tensile one after interchange occurs between stress axis σ ₁ and σ ₂. A similar experiment is observed when the sample with tensile en echelon faults changes into that with a bend fault after two segments of the en echelon fault linking up. These facts indicate that the variation of b value may contain the information of the regional dominant structural model. Therefore, b-value analyses could be a new method for studying regional dominant structural models.