Quantifying particle aggregation in sediments

Sediments often occur as non‐normal size distributions composed of discrete, partially aggregated particle populations. These populations reflect provenance, dispersal pathways and their depositional environments. Recent experimental laboratory studies describing mud flocculation in turbulent marine systems prompted this investigation of the potential of aggregates to record size‐sensitive transport dynamics in a terrestrial fluvial system. Here, sediment‐size distributions in their natural condition of particle–aggregate mixtures are analysed by parametric statistics. A practical and freely available decompositional approach is outlined and field tested, which allows sediment to be viewed in both its conventional particulate form and as its naturally occurring mixture of transport‐stable aggregates and elementary particles. From a sequence of upward‐fining slack water couplets in the Flinders Ranges, South Australia, it is demonstrated that the characteristics, provenance and depositional history of fine‐grained sediments consisting of particle‐aggregate mixtures can best be understood fully by quantifying aggregation.     

Burial and infilling of a karst in Papua New Guinea by road erosion sediments

The anthropogenic impact on karst in Papua New Guinea is briefly introduced and a specific case is presented detailing the effect of road erosion sediments on a small karst. The karst is in the perennially humid tropics and covered with primary rain forest. The road was placed high above the karst on steep friable rock and traverses several of its catchments. The changes to and the rate of burial of parts of the karst and the infilling of the caves are described. The karst drainage has altered, and there is increased water storage. The sediment build-up ceased in less than a year due to vegetation and stabilization of the road embankments. It is concluded that any construction within a catchment leading to a karst should be assessed as to its impact on the karst.     

Chemical characterization of fractionated humic acids from lake and marine sediments

Humic acids from Recent lacustrine and marine sediments were divided into five components by extractions with organic solvents and characterized by elementary composition, ultraviolet, visible and infrared absorption spectra and n.m.r. spectra. The results suggest that sedimentary humic acids have a cyclic structure (40–50% of the total carbon), which is considered to be alicyclic rather than aromatic. No marked differences except for an absorption near 410 mμ were observed between humic acids from lake and marine sediments.     

Suitability of monosaccharides as markers for particle identification in carbonate sediments*†

The identification of the remains of organisms contributing to carbonate sediments by means of scanning electron-microscopy is limited to particles of the 2–20 μm size class. Mineralogy and the content of Mg, Sr and trace elements alone are usually insufficient to solve the problem of identification, especially in the differentiation between algal and coral aragonite. The organic matrix of calcareous organisms consists of stable biopolymers such as polysaccharides and glycoproteins which are intimately associated with the carbonate skeleton. Analysis of these hydrolysed compounds gives rise to characteristic arrays of monosaccharides which provide independent criteria for producer identification. The calcareous green algae Halimeda, Penicillus and Udotea show high xylose and low fucose levels. Xylose and fucose levels are elevated in the red algae Amphiroa but only fucose is prominent in the brown algae Padina. The corals Oculina, Porites, Millipora and Montastrea are relatively rich in fucose and show little or no xylose. In the bivalves Arca, Codakia and in Argopecten mannose may be characteristic. Analysis of artificial and natural sediments demonstrates that coral and algal aragonite can be distinguished on the basis of the total sugar concentration and respective xylose and fucose levels. The applicability of the technique in comparison to geochemical and mineralogical methods has been demonstrated for surface sediments from varying water depths of Harrington Sound, Bermuda.     

Geotechnical characterization of marine sediments in the Ulleung Basin,East Sea

The geotechnical characteristics of Ulleung Basin sediments are explored using depressurized samples obtained at 2100 m water depth and 110 m below the sea floor. Geotechnical index tests, X-ray diffraction, and SEM images were obtained to identify the governing sediment parameters, chemical composition and mineralogy. We use an instrumented multi-sensor oedometer cell to determine the small-strain stiffness, zero-lateral strain compressibility and electromagnetic properties, and a triaxial device to measure shear strength. SEM images show a sediment structure dominated by microfossils, with some clay minerals that include kaolinite, illite, and chlorite. The preponderant presence of microfossils determines the high porosity of these sediments, defines their microstructure, and governs all macroscale properties. The shear wave velocity increases as the vertical effective stress increases; on the other hand, porosity, permittivity, electrical conductivity, and hydraulic conductivity decrease with increasing confinement. All these parameters exhibit a bi-linear response with effective vertical stress due to the crushable nature of microfossils. Well-established empirical correlations used to evaluate engineering parameters do not apply for these diatomaceous sediments which exhibit higher compressibility than anticipated based on correlations with index properties. Settlements will be particularly important if gas production is attempted using depressurization because this approach will cause both hydrate dissociation and increase in effective stress.     

Water quality characterization of road runoff in urban area of Guangzhou, China

Many kinds of pollutants such as suspended solid, oil and grease and heavy metals were enriched in urban road runoff, they can significantly degrade quality of the receiving water and affect hydro-ecosystem. Road runoff water quality was investigated in a typical city of South China-Guangzhou and it was found that road runoff from this city was seriously polluted than the investigation results carried out in other countries, water quality of them was assigned to V type according to Chinese surface water quality criteria. Some water quality parameters COD, SS, TP, Cu, Cr and Zn were highly correlated, indicating that these pollutants have the same sources or attached themselves to the others. In the six monitored heavy metals, Cr, Ni and Zn were mainly of particulate-bounded phase;     

The concept of a equilibrium surface applied to particle sources and contaminant distributions in estuarine sediments

Studies have shown that many chemically-reactive contaminants become associated with fine particles in coastal waters and that the rate, patterns, and extent of contaminant accumulation within estuarine systems are extremely variable. In this paper, we briefly review our findings concerning the accumulation patterns of contaminants in several estuarine systems along the eastern coastline of the United States, and have applied a well-established concept in geology, that is “an equilibrium profile,” to explain the observed large variations in these patterns. We show that fine-particle deposition is the most important factor affecting contaminant accumulation in estuarine areas, and that accumulation patterns are governed by physical processes acting to establish or maintain a sediment surface in dynamic equilibrium with respect to sea level, river discharge, tidal currents, and wave activity. Net long-term particle and particle-associated contaminant accumulations are negliglible in areas where the sediment surface has attained “dynamic equilibrium” with the hydraulic regime. Contaminant, accumulation in these areas primarily occurs by the exchange of contaminant-poor sedimentary particles with contaminant-rich suspended particles during physical or biological mixing of the surface sediment. Virtually the entire estuarine particulate and contaminant load bypasses these “equilibrium” areas to accumulate at extremely rapid in relatively small areas that are temporally out of equilibriums as a result of natural processes or human activities. These relatively small areas serve as major sinks for particles from riverine and marine sources, and for biogenic carbon formed in situ within estuaries or on the inner shelf.     

Molecular characterization of dissolved organic matter in pore water of continental shelf sediments

Dissolved organic matter (DOM) in sediment pore water is a complex molecular mixture reflecting various sources and biogeochemical processes. In order to constrain those sources and processes, molecular variations of pore water DOM in surface sediments from the NW Iberian shelf were analyzed by ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) and compared to river and marine water column DOM. Weighted average molecular element ratios of oxygen to carbon ((O/C)_wa) and hydrogen to carbon ((H/C)_wa) provided general information about DOM sources. DOM in local rivers was more oxygenated ((O/C)_wa 0.52) and contained less hydrogen ((H/C)_wa 1.15) than marine pore water DOM (mean (O/C)_wa 0.50, mean (H/C)_wa 1.26). The relative abundance of specific compound groups, such as highly oxygenated aromatic compounds or nitrogen-bearing compounds with low H/C ratios, correspond to a high concentration of lignin phenols (160 μg/g sediment dry weight) and a high TOC/TN ratio (13.3) in the sedimentary organic matter and were therefore assigned to terrestrial sources. The lower degree of unsaturation and a higher relative abundance of nitrogen-bearing compounds in the pore water DOM reflected microbial activity within the sediment. One sampling site on the shelf with a high sediment accumulation, and a humic-rich river sample showed a wide range of sulfur compounds in the DOM, accompanied by a higher abundance of lipid biomarkers for sulfate-reducing bacteria, probably indicating early diagenetic sulfurization of organic matter.     

The influence of particle size variations on the magnetic properties of sediments from the north-eastern Irish Sea

This paper considers the magnetic properties of a range of recent and contemporary sediments from the north eastern part of the Irish Sea. Principal component ordinations of the results show a close link between magnetic property variations and particle size. The magnetic properties of a subset of samples, particles sized by a combination of sieving and pipette analysis, confirm that variations in ferrimagnetic (‘magnetite’) grain size parallel those in particle size, despite the fact that the magnetic grains in the fine grades have diameters 1–2 orders of magnitude smaller than those of the particle size fraction in which they occur. This is best explained by postulating that the fine magnetic grains occur in the clay fraction but are present in declining concentrations in the coarser grades up to 4ø as an artefact of the pipette method. Most samples have a biomodal distribution of magnetic minerals, with a coarse mode associated with heavy minerals in the sands or coarse silts, and a fine mode in the clays. Magnetic susceptibility (x) and saturation isothermal remanent magnetization (SIRM) largely pick out the coarse mode where present; anhysteretic remanent magnetization (ARM) largely picks out the fine mode. The results open up the possibility of normalizing samples from these environments for particle size and, more specifically, clay content, by means of ARM or ARM/x values. The most likely source for the uniform and almost exclusive stable single domain magnetite, which dominates the magnetic properties of the clays, is thought to be bacterial magnetosomes. The measurements as a whole do not appear to hold much promise for discriminating sediment source types.     

Experimental insights into laser diffraction particle sizing of fine‐grained sediments for use in palaeoceanography

Grain‐size measurements of fine‐grained sediments based on laser diffraction may contain spurious information due to the over‐estimation of the size and proportion of platy particles. Consequently, some regard the use of laser diffraction particle sizing in palaeoceanography inappropriate. Here, it is shown experimentally that such concerns are not warranted. Laser diffraction particle sizing is known to be fast, precise and allows for detailed particle sizing over a broad size range; it is therefore potentially a very powerful technique if the complications associated with it can be overcome. As most sediments are mixtures of different components transported by different mechanisms, inferences of past environmental parameters require decomposition of the grain‐size record in question. Useful decomposition can only be performed if changes in the contribution of the components are registered predictably by the measuring device. This study reports on mixing experiments which show that the Fritsch A22 laser diffraction particle sizer does indeed register small changes in the contribution of the mixing components in a predictable way. Mixing proportions estimated from the measurements do, however, differ from the initial mixing proportions, but these can be converted with only small errors. Application of the conversion equations to a North Atlantic grain‐size record that showed consistent slowdown of deep‐ocean circulation in response to millennial scale ice‐rafting events during the last glacial does not quantitatively affect the original inferences. Laser diffraction particle sizing of fine‐grained sediments therefore yields reproducible and useful data for palaeoceanographic reconstructions.     

Mobilisation of traffic-derived trace metals from road corridors into coastal stream and estuarine sediments,Cairns, northern Australia

This investigation revealed the presence of traffic-derived metals within road, stream and estuarine sediments collected from a coastal catchment, northern Australia. Studied road sediments displayed variable total metal concentrations (median Cd, Cu, Pb, Pd, Pt, Ni and Zn values: 0.19, 42.6, 67.5, 0.064, 0.104, 36.7 and 698 mg/kg, respectively). The distinctly elevated Zn values are due to abundant tyre rubber shreds (as verified by SEM-EDS and correlation analysis). By comparison to the road sediments, background stream sediments taken upstream from roads have relatively low median Pb, Pd, Pt and Zn concentrations (7.3 mg/kg Pb, 0.01 mg/kg Pd, 0.012 mg/kg Pt, 62 mg/kg Zn). Stream and estuarine sediment samples collected below roads have median values of 21.8 mg/kg Pb, 0.014 mg/kg Pd, 0.021 mg/kg Pt and 71 mg/kg Zn, and exhibit ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb ratios that appear on a mixing line between the isotopically distinct background stream sediments and the road sediments. Thus, mobilisation of dusts and sediments from road surfaces has resulted in relatively elevated Pb, Pd, Pt and Zn concentrations and non-radiogenic Pb isotope ratios in local coastal stream and estuarine sediments. The investigation demonstrates that traffic-derived metals enter coastal stream and estuary sediments at the fringe of the Great Barrier Reef lagoon.     

Variations in chemical composition and particle size of dune sediments along the west coast of Jutland,Denmark

Geochemical and textural variations in frontal dune sediments along the western coast of Jutland, Denmark, have been investigated in order to identify possible sediment ‘provinces’ and transport pathways. An understanding of sediment sources and sinks is important for both for an understanding of the nature of sedimentary environments and for applied coastal engineering and management purposes. Four coastal sectors were identified on the basis of geochemical composition. One sector is compositionally different from the other three units, having higher concentrations of the trace elements Ni, Cr, V, Sc, Zn, Pb, Ba, Zr and many rare earth elements. Dune sediments on this section of coast also have higher Al₂O₃ to K₂O ratios and lower Al₂O₃ to Fe₂O₃ ratios, reflecting a lower content of feldspar and higher content of heavy minerals. It is inferred that different, or additional, sediment source(s) have supplied sediment to this section of coast. Beach nourishment has contributed to the observed compositional differences, but previous data obtained from the Lodbjerg area indicate that aeolian sands on this section of coast naturally have a relatively high Si, Fe and Ti content, reflecting high quartz / feldspar ratio and relatively high content of heavy minerals, compared with those on other sections of the coast. Frontal dunes along the most northern section show high abundances of K₂O, Rb and Ba, reflecting a relatively high K-feldspar content derived from local sources. Alongshore trends were also identified in the mean particle size and sorting of the frontal dunes, although there is no direct correspondence with the observed geochemical differences. Three coastal units can be identified on the basis of particle size. Frontal dune sediments in the middle section are relatively coarser and less well-sorted than those to the north and south, probably reflecting both the addition of beach nourishment material and greater exposure to strong westerly winds, which are a capable of transporting a wide range of particle sizes. The three units defined on this basis do not correlate directly with the units defined on the basis of geochemical composition.     

Mineral magnetic characterization of the Godavari river sediments: Implications to Deccan basalt weathering

Mineral magnetic analysis including thermo-magnetic studies and clay mineralogy on bed load and floodplain sediments from the Godavari river indicate distinct mineral assemblages. The floodplain sediments up to the delta region are characterised by unimodal ferrimagnetic mineralogy marked by the presence of maghemite and single domain magnetites derived from Deccan basalts. On the other hand the bed loads show varied magnetic mineral assemblages depicting greater local mixing from the non-basaltic bedrock province. The temperature dependent magnetic susceptibility and clay mineralogy of the floodplain samples show titanomagnetites (Fe₃O₄-Fe₂TiO₄), maghemite (χ _LF-Fe₂O₃) and smectite that are characteristic of the Deccan Volcanic Province (DVP). Presence of this ferrimagnetically dominant unimodal assemblage up to the delta region and probably into the Bay of Bengal off the Godavari river is attributed to extensive chemical weathering of the basalt. The quantitative approach of mineral magnetism, therefore, can be used to study the paleomonsoon variability and its relation to Deccan basalt weathering from the Godavari-Bengal fan system.     

基于非均质地层参数表征的颗粒流模型构建

非均质地层参数的获取与表征方法是浅层地质体改造的重要依据。基于非均质地层的地质建模,表征具有随机不确定性和模糊不确定性的土体表观参数和物理力学参数。利用 Weibull 分布统计描述局部地层信息,并应用Diamond-Square分形插值方法,结合差分盒子维计算非均质地层分形维数,进一步合理演算整体地层参数。采用PFC3D数值模拟软件,结合马尔科夫链蒙特卡洛方法采样数据,对非均质地层块石颗粒及土颗粒进行建模。通过非均质地层模拟结果,发现其破坏过程与应力应变曲线要比均质土体复杂得多,由于块石大颗粒的含量、分布特性对土样力学性质影响显著。本文建模方法有助于非均质地层参数表征研究。     

Early diagenesis of organic matter in recent Black Sea sediments: characterization and source assessment

The organic matter in 9 recent (not more than 250 years old) and ‘organic-rich’ sediments from the southern Black Sea shelf and upper slope have been characterized semi-quantitatively by Pyrolysis/Gas Chromatography/Mass Spectrometry (PY/GC/MS) and¹³C Cross Polarization Magic Angle Spinning Nuclear Magnetic Resonance (CPMAS-NMR) spectrometry. The organic matter of 7 of the studied sediments was found to be ligno-carbohydrate with a proteinaceous component, one sediment appeared to contain oxidized coal dust and one contained thiophenes in association with pyrite. The ligno component is derived from grasses and soft wood lignin. Material entrapped in an anoxic environment contained the highest proportions of carbohydrate and protein. All the samples had suffered diagenesis as is generally shown by the attachment of carboxyl groups and the removal of methoxyl groups. The evidence suggests that diagenesis occurred whilst the particles traversed the oxic water column.     

Rock-magnetic characterization of early, redoxomorphic diagenesis in turbiditic sediments from the Madeira Abyssal Plain

Rock‐magnetic measurements of two sediment cores from the Madeira Abyssal Plain (MAP), north Atlantic, are used to investigate post‐depositional changes in the concentration, grain size and composition of magnetic minerals in the sediments that have occurred within organic‐rich turbidite horizons. The changes are associated with an initial stage of suboxic (reductive) diagenesis, following depletion of porewater O₂, and a later stage of oxidative diagenesis associated with the slow descent of an oxidation front through the sediment, as a result of diffusion of O₂ from the overlying sea water. The turbidites are of late Quaternary age (δ¹⁸O stages 1–3) and derive both from different sites on the NW African continental margin, and from the flanks of the Canary Islands. Thus, the turbidites are variable compositionally, especially in terms of carbonate, detrital magnetic mineral and organic carbon content. Diagenetic changes in these sediments have been identified using solid‐phase geochemical data (U, Mn, C_org and CaCO₃) reported previously in more than one study. Rock‐magnetic parameters of the sediments, when expressed on a carbonate‐free basis, reveal that significant depletion of detrital ferrimagnetic iron (Fe²⁺/Fe³⁺) oxide grains has occurred within organic‐rich turbidites during redoxomorphic diagenesis. Normalized quotients of magnetic parameters also show that reductive diagenesis is a ferrimagnetic grain size‐selective process, but it has a minimal effect on the canted‐antiferromagnetic Fe³⁺ oxides in the sediment. Such components, if present, therefore become relatively enriched in magnetic assemblages as the ferrimagnetic grains are dissolved progressively, and bulk magnetic concentration is thus depleted. There is clear evidence in both cores for the existence of ultrafine ferrimagnetic grains at depth within the suboxic zone of the organic‐rich turbidites, beneath both active and fossil oxidation fronts. These grains are most probably associated with populations of live magnetotactic bacteria, which commonly inhabit such organic‐rich horizons and play a part in the chain of bacterially mediated reactions normally associated with suboxic diagenesis. These results show that simple and rapid rock‐magnetic techniques can be used to characterize early diagenetic processes involving iron phases in deep‐sea sediments, at least as effectively as more laborious, time‐consuming and sample‐destructive geochemical measurements.     

Geochemical characterization of soils, sediments and waters around active and abandoned dumpsites in Lagos

In developing countries, large amounts of wastes are dumped daily in open dumping sites without proper management. This practice usually causes enhanced concentration of metallic ions in environmental media within and beyond the vicinity of such dumps with attendant adverse environmental and health risks. Hence the aim of this study is to assess and elucidate the physico- and metallic ions concentrations in three environmental media （soils, sediments and waters） around active （Ojota） and abandoned （Isolo） dumpsites in Lagos and also to do a comparative study with reference to possible environmental and health impacts. A total of eighty samples comprising water, sediments and topsoils were collected around the two dumpsites. The soil and sediment were dried, disaggregated and sieved to 〈75 μm fraction for analysis of the metallic ions using aqua-regia digestion technique and Inductively Coupled Plasma Mass Spectrometry （ICP-MS）. The analysis of metallic ions and cations in water was carried out using Inductively Coupled Plasma-Optical Emission Spectrometry （ICP-OES） while unacidified water samples were analyzed for anions concentrations using the DIONEX DX-120 Ion Chromatography techniques. Analytical results show that pH, NO3, Fe, Mn and Na in most of the water samples are above WHO and EPA standards. Also there are relatively strong correlations between NO3 and Cl, SO4, Coliform, TDS and EC which are an indicator of water contamination especially in the direction of groundwater flow. The mean values of the significant metallic ions present in the water samples include Cu （16.29 and 38.0）, Zn （535.71 and 667.0）, A1 （0.27 and 0.19）, Ba （42.86 and 55.0）, Sr （80.0 and 136.0） and B （118.7 and 160.2） for active （Ojota） and abandoned （Isolo） dnmpsites respectively. Soil samples revealed varied concentrations with the estimated average contamination factors of 3.86 and 5.71 （As）, 1.60 and 1.93 （Mo）, 3.41 and 4.24 （Zn）, 0.93 and 2.23 （Cu）, 7.71 and 12.64 （Pb）, 8.71 and 9.21（Cd） for both active and abandoned sites respectively. All these metals with Ag are also significant and follow the same trend in the sediments. Ag, Bi, Sb, Ga, Sc, Mn, Ga and La in soil samples are only significant for samples close to the dnmpsites while Bi, Be, Sb, Co, Cu, La and Cr are significant for sediments taken downstream. Most of the metallic ions show significant enrichment in both soil and sediments while A1, B, Ba and Sr are only significant in water.     

Phospholipid ester-linked fatty acids composition of size-fractionated particles at the top ocean surface

Surface microlayer and subsurface water samples were collected at an oligotrophic Mediterranean site during a diel cycle. The composition of phospholipid ester-linked fatty acids (PLFA) was determined in size-fractionated particles (0.2–0.7 μm; 0.7–200 μm) in order to characterize the major contributors of organic matter to different size fractions. GF/F-retained particles (0.7–200 μm) from the surface microlayer were consistently enriched in PLFA relative to the underlying water. Molecular markers revealed a substantial difference in biological assemblages in both particle sizes. The larger particles were dominated by dinoflagellates, cyanobacteria, microzooplankton and attached bacteria, whereas particles filtered through GF/F and collected on 0.2 μm porosity Durapore filters (0.2–0.7 μm) were mostly bacteria and heterotrophic flagellates. Bacterial PLFA associated with 0.7–200 μm particles were more abundant than those in the 0.2–0.7 μm particles. Specific markers in the branched series appeared more representative of bacteria of smaller particle size.     

地质标准物质粒度测量与表征的现代方法

地质标准物质是地质材料分析的计量标准,在分析质量监控、仪器校准和分析方法评价中发挥着重要作用。地质标准物质大多为粉体材料,而粒度是粉体材料的一项重要特性指标。长期以来,地质标准物质的粒度一直采用过筛法检测;近年来在超细标准物质研制中引入了以激光粒度仪为代表的现代粒度分析方法,并以直观的粒度分布图和简洁的特征粒度来表达分析结果,大大提升了粉体地质标准物质粒度特性的测量及表征水平。在此工作基础上,测量了正在广泛使用的典型地质标准物质的粒度分布,获得了前所未知的粒度分布信息,为这些标准物质的正确使用和取样不确定度评价提供了有益的资料。简单地介绍了检测粉体材料颗粒特性的现代方法,讨论了地质分析与粒度分析在概念上的差异,并就今后地质标准物质乃至地质分析样品的粒度检测与表征方法提出了建议。