Combined seismic reflection and refraction profiling in southwest Germany - detailed velocity mapping by the refraction survey

Summary. Within the framework of site survey studies of the Deep Drilling Program of the Fedral Republic of Germany (KTB), coincident deep-seismic reflection and refraction experiments in the Black Forest, southwest Germany, were carried out. The simultaneous interpretation of the reflection and the refraction data reveals in particular both a strong velocity reduction in the upper crust and a laterally varying laminated structure of the lower curst. Additional refraction lines result in a three-dimensional crustal model which shows two distinct crustal types of different seismic properties. These crustal types seem to correlate with the major geologic units of Southwest Germany. Variations of Poisson's ratio derived from clearly recorded shear wave data show a similar trend.     

Results of deep reflection seismic profiling in the Oberpfalz (Bavaria)

Summary. In order to investigate the target area of the Continental Deep Drilling (KTB) in the Oberpfalz a network of six seismic reflection lines was acquired in 1985 using the Vibroseis technique. The average length of these lines was 50 km. In addition, the 185 km long NW/SE striking line DEKORP 4 with its short appendix line 4-Q of 40 km length was acquired with the same technique. The results reveal a strongly structured upper crust. This is in contrast with previous surveys in the German Variscides which show a poorly reflective upper crust and a strongly reflective lower crust. Except for the S part of DEKORP 4 in the Oberpfalz area the Mono is only weakly reflective. In addition to the Vibroseis survey 96 shots along line DEKORP 4 were recorded by conventional reflection techniques and by portable reflection and refraction stations from university institutes and geological surveys in order to obtain wide-angle reflection and expanding spread data.     

Synoptic interpretation of seismic reflection and refraction data

Summary. The structure of the upper lithosphere beneath southern Germany, northern Switzerland and west-central Utah (U.S.A.) has been investigated in detail by various geophysical methods. A synoptic interpretation of travel time and amplitude data obtained in seismic refraction and wide-angle reflection surveys, combined with near-normal incidence reflection observations, now permits the elucidation of the fine structure in a more quantitative and unified manner. With this scheme it is possible to unambiguously identify low-velocity zones and to deduce velocity gradients if reliable amplitude information is included in the inversion process.     

The seismic structure of thinned continental crust in the northern Bay of Biscay

Summary. The stretching and thinning of the continental crust, which occurs during the formation of passive continental margins, may cause important changes in the velocity structure of such crust. Further, crust attenuated to a few kilometres' thickness, can be found underlying 'oceanic' water depths. This paper poses the question of whether thinned continental crust can be distinguished seismically from normal oceanic crust of about the same thickness. A single seismic refraction line shot over thinned continental crust as part of the North Biscay margin transect in 1979 was studied in detail. Tau— p inversion suggested that there are differences between oceanic and continental crust in the lower crustal structure. This was confirmed when synthetic seismograms were calculated. The thinned continental crust (β± 7.0) exhibits a two-gradient structure in the non-sedimentary crust with velocities between 5.9 and 7.4 km s⁻¹; an upper 0.8 s⁻¹ layer overlies a 0.4 s⁻¹ layer. No layer comparable to oceanic layer 3 was detected. The uppermost mantle also contains a low-velocity zone.     

Deep seismic reflection profiles across the western Barents Sea

Summary. The continental crust beneath the western Barents Sea has been acoustically imaged down to Moho depths in a large scale deep seismic reflection experiment. A first-order pattern of crustal reflectivity has been established and the thickness of the crust determined. A number of features with important implications for the tectonics of the area have been discovered. The results are presented in the form of two transects.     

Coincident seismic reflection/refraction studies of the continental lithosphere: a global review

Summary. Vertical-incidence reflection profiling has identified several characteristic features of the continental Iithosphere including a generally transparent upper crust, a reflective lower crust, reflections from the crust-mantle boundary, and a commonly transparent upper mantle. The underlying physical causes of these characteristic features remain poorly understood. This review summarizes additional information brought to bear on the physical properties of these characteristic crustal structures through the use of coincident wide-angle refraction profiling.     

The Asturian Basin within the North Iberian margin (Bay of Biscay): seismic characterisation of its geometry and its Mesozoic and Cenozoic cover

The distribution and structure of the Mesozoic and Cenozoic cover within the central part of the North Iberian Margin (Bay of Biscay) is analysed based on a dense set of 2D seismic reflection lines and logs. The integration of well data allows the recognition of seven seismostratigraphic units and the construction of a surface that illustrates the 3D morphology of this area at the time of the Jurassic rifting. The study zone comprises what is known as Le Danois Bank, a basement high, and the Asturian Basin, one of the sedimentary basins originated during the Iberian rifting at the end of the Paleozoic. Its development continued with the oceanisation of the Bay of Biscay as a failed arm of the Atlantic rift; later, during the Cenozoic, a drastic change in tectonic regime induced the partial closure of Biscay and building up the Cantabrian?Pyrenean chain along the northern border of Iberia. This compressional period left its imprint in the Asturian Basin sediments in the form of a mild inversion and general uplift. The geometry of the basin bottom appears as an asymmetric bowl thinning out towards the edges, with a main E‐W depocenter, separated by E‐W striking faults from a secondary one. Those bounding faults show twisted trends in the north, interpreted as a consequence of the compressional period, when a transfer zone in a N‐S direction formed between the two E‐W striking deformation fronts in Biscay. This study shows that the transfer zone extends further to the west, reaching the longitude of Le Danois Bank. The maximum thickness of the filling within the Asturian Basin is estimated in more than 10 km, deeper than assessed in previous studies. The recognition of frequent halokynetic structures at this longitude is another observation worth to remark. Based on this study, it is suggested that the basin formed on top of a distal basement block of stretched crust limiting with the hyperextended rifted domain of Biscay. This location largely conditioned its deformation during the late compression.     

Application of stacking and inversion techniques to three-dimensional wide-angle reflection and refraction seismic data of the Eastern Alps

We present new methods for the interpretation of 3-D seismic wide-angle reflection and refraction data with application to data acquired during the experiments CELEBRATION, 2000 and ALP 2002 in the area of the Eastern Alps and their transition to the surrounding tectonic provinces (Bohemian Massif, Carpathians, Pannonian domain, Dinarides). Data was acquired on a net of arbitrarily oriented seismic lines by simultaneous recording on all lines of seismic waves from the shots, which allows 2-D and 3-D interpretations. Much (80%) of the data set consists of crossline traces. Low signal to noise (S/N) ratio in the area of the young orogens decreases the quality of travel time picks. In these seismically heterogeneous areas it is difficult to assign clearly defined arrivals to the seismic phases, in particular on crossline record sections.
In order to enhance the S/N ratio, signal detection and stacking techniques have been applied to enhance the Pg -, Pn - and PmP phases. Further, inversion methods have been developed for the interpretation of WAR/R-data, based on automated 1-D inversion ( Pg ) and the application of the delay time concept ( Pn ). The results include a 3-D velocity model of the crust based on Pg waves, time and depth maps of the Moho and a Pn -velocity map. The models based on stacked data are robust and provide a larger coverage, than models based on travel time picks from single-fold (unstacked) traces, but have relatively low resolution, especially near the surface. They were used as the basis for constructing models with improved resolution by the inversion of picks from single-fold data. The results correlate well with geological structures and show new prominent features in the Eastern Alps area and their surrounds. The velocity distribution in the crust has strong lateral variations and the Moho in the investigation area appears to be fragmented into three parts.     

Isostasy of the Northern Bay of Biscay Continental Margin

Summary. Spectral analysis of eight marine gravity profiles and seven SEASAT profiles, combined with corresponding bathymetric data over the Northern Bay of Biscay origin, yield identical admittance functions for wavelengths greater than 120 km. the resulting admittance function has been interpreted in terms of an Airy model of compensation for wavelengths greater than 250 km and in terms of an elastic plate model of compensation for shorter wavelengths. the Airy model corresponds to a crustal thickness variation across the margin. the plate model with an elastic thickness of 8 km is associated with the regional compensation of a sedimentary load which was probably emplaced during and just after rifting.     

Deep seismic reflection evidence for the role of extension in the evolution of continental crust

Summary. Deep seismic reflection profiling, as well as geologic studies, indicate that extensional basins are a common feature of continental crust. The wide-spread occurrence of extensional basins, combined with published models on the effects of extension on lower crustal rocks, suggests that extensional processes play an important role in the evolution of continental crust. Extension is now recognized to have been the last major tectonic event to affect approximately 50% of the United States. This observation and (he preservation of extensional features in areas which have experienced subsequent episodes of compression, suggests that extensional processes may lead to a strengthening of continental crust. In areas of active extension such as the western United States, seismic and petrologic data, as well as theoretical modeling of heat flow data, suggests that the lower crust may be predominantly intrusive igneous material emplaced during extension and that the present Mohorovicic discontinuity formed during extension. Although the interpretation of the various data is somewhat speculative, we suggest that the volume of continental material in some areas has doubled as a result of extension. Thus, extension may result in the addition of a significant amount of new material to the continents.