硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

砂金中金、银、硅、铁、铜、铋、砷的测定

金含量较高，采用高铈盐容量法。铁、铜、银采有原子吸收，硅采用等离子光谱，铋和砷采用氩化物原子荧光法测定。     

形变、畸变、应变、变形

形变、畸变、应变和变形等词汇是连续介质力学中描述物体变形的、最基本的术语,它们包含着不同的概念,我国力学家们对这些力学中最基本的概念都有着明确的含义。物体在外力的作用下要发生两种运动,一种运动是物体在空间位置的变化,我们叫刚性运动,另一种运动是物体自身形状和大小的变化,称力变形。     

吨、公吨、短吨、长吨

吨(ton),重量单位,与公吨(tonne)同,其通用符号为t。1公吨=1t=1000kg。欧洲大陆及不用英语的各国常用。短吨(short ton),美国常用,其符号为shton,1sh ton=2000磅(pound)=907.18486kg。磅为英制重量单位,其符号为1b,1b=0.45359237kg。长吨(1ong ton),英国常用,1长吨=2240 1b=1016.047kg。     

ICP-OES法测定煤样中磷、铜、铅、锌、镉、铬、镍、钴等元素

采用硝酸—氢氟酸—高氟酸混合体系,微波消解样品,用ICP-OES法测定煤样中微量元素P、Cu、Pb、Zn、Cr、Dd、Ni、Co,快速简便、准确度高。     

中国气象局兰州干旱气象研究所开放、流动、竞争、协作

实行开放式的办所策略，加强对外学术交流和科技合作，广泛吸纳国内外最新研究成果，瞄准世界前沿领域，不断拓宽研究领域，提升科技竞争力。干旱所设立了“干旱气象科学研究基金”，面向国内外相关科研机构开放。以甘肃省干旱气候变化与减灾重点实验室为合作平台，初步实现了产学研的结合，实现了科技资源的优化配置。积极参加各类高水平的国际国内学术会议，邀请国外专家学者来所开展学术交流和访问，与澳大利亚气象局等国外机构签署了国际合作协议。     

深孔电极发射光谱法测定地质样品中Be、B、Pb、Mo、Sn、Cu、Ag、Zn

本法是在样品中加入适量的缓冲剂,使难发挥元素Be形成易挥发的氟化物,与B、Pb、Mo、Sn、Cu、Ag、Zn等元素在同一时间内蒸发,利用深电孔极的分馏效应,有效地降低光谱背景以及被测元素的检出限。加入内标元素,提高了方法的准确度和精密度。采用深孔电极,取样量大,代表性好。一次摄谱,同时检测多个元素,大大提高了工作效率,又减少了测试费用。方法操作简便,适合于大批量样品的测试。检出限ω(B)/10-6分别达到:Be:0.50、B:0.91、Sn:0.50、Ag:0.02等,均满足《覆盖区多目标地球化学调查样品测试及质量监控暂行规定》规定。     

中、哈、俄、乌、土、阿、吉、塔8国合作编图计划继续进行

2001年10月25日至11月30日,中欧亚岩相—古地理、构造、复原及地质生态图集编辑委员会和执行负责人会议分别在阿拉木图、比什凯克和莫斯科举行.来自中国、哈萨克斯坦、俄罗斯、乌孜别克斯坦、阿塞拜疆和吉尔吉斯斯坦的24位专家到会.中国新疆地质矿产勘查开发局专家董连慧、宋志齐和侯启尧参加了阿拉木图会议,会议由哈萨克斯坦南哈地质公司自然资源研究所主持,召集人为该所地质学家O.A.费多连科. 会议最终校定了已编辑完成的《中欧亚岩相—古地理、构造、复原及地质生态图集》,对提出的问题共同作出了修改方案,该图集2000年曾在巴西召开的第…     

应用发射光谱法测定银、硼、铅、钼、锡

介绍了采用以电弧为光源的发射光谱法测定银、硼、铅、钼、锡的应用过程;认为通过对仪器的适当改造,应用现代的研究成果,可以快速提升实验室检测能力。     

Roles of xenomelts,xenoliths, xenocrysts,xenovolatiles, residues,and skarns in the genesis,transport, and localization of magmatic Fe-Ni-Cu-PGE sulfides and chromite

Most sulfide-rich magmatic Ni-Cu-(PGE) deposits form in dynamic magmatic systems by partial melting S-bearing wall rocks with variable degrees of assimilation of miscible silicate and volatile components, and generation of barren to weakly-mineralized immiscible Fe sulfide xenomelts into which Ni-Cu-Co-PGE partition from the magma. Some exceptionally-thick magmatic Cr deposits may form by partial melting oxide-bearing wall rocks with variable degrees of assimilation of the miscible silicate and volatile components, and generation of barren Fe ± Ti oxide xenocrysts into which Cr-Mg-V ± Ti partition from the magma. The products of these processes are variably preserved as skarns, residues, xenoliths, xenocrysts, xenomelts, and xenovolatiles, which play important to critical roles in ore genesis, transport, localization, and/or modification. Incorporation of barren xenoliths/autoliths may induce small amounts of sulfide/chromite to segregate, but incorporation of sulfide xenomelts or oxide xenocrysts with dynamic upgrading of metal tenors (PGE > Cu > Ni > Co and Cr > V > Ti, respectively) is required to make significant ore deposits. Silicate xenomelts are only rarely preserved, but will be variably depleted in chalcophile and ferrous metals. Less dense felsic xenoliths may aid upward sulfide transport by increasing the effective viscosity and decreasing the bulk density of the magma. Denser mafic or metamorphosed xenoliths may also increase the effective viscosity of the magma, but may aid downward sulfide transport by increasing the bulk density of the magma. Sulfide wets olivine, so olivine xenocrysts may act as filter beds to collect advected finely dispersed sulfide droplets, but other silicates and xenoliths may not be wetted by sulfides. Xenovolatiles may retard settling of – or in some cases float – dense sulfide droplets. Reactions of sulfide melts with felsic country rocks may generate Fe-rich skarns that may allow sulfide melts to fractionate to more extreme Cu-Ni-rich compositions. Xenoliths, xenocrysts, xenomelts, and xenovolatiles are more likely to be preserved in cooler basaltic magmas than in hotter komatiitic magmas, and are more likely to be preserved in less dynamic (less turbulent) systems/domain/phases than in more dynamic (more turbulent) systems/domains/phases. Massive to semi-massive Ni-Cu-PGE and Cr mineralization and xenoliths are often localized within footwall embayments, dilations/jogs in dikes, throats of magma conduits, and the horizontal segments of dike-chonolith and dike-sill complexes, which represent fluid dynamic traps for both ascending and descending sulfides/oxides. If skarns, residues, xenoliths, xenocrysts, xenomelts, and/or xenovolatiles are present, they provide important constraints on ore genesis and they are valuable exploration indicators, but they must be included in elemental and isotopic mass balance calculations.     

Coprecipitation of Ti,Mo, Sn and Sb with fluorides and application to determination of B,Ti, Zr,Nb, Mo,Sn, Sb,Hf and Ta by ICP-MS

We examined the coprecipitation behavior of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides under two different fluoride forming conditions: at < 70 °C in an ultrasonic bath (denoted as the ultrasonic method) and at 245 °C using a Teflon bomb (denoted as the bomb method). In the ultrasonic method, small amounts of Ti, Mo and Sn coprecipitation were observed with 100% Ca and 100% Mg fluorides. No coprecipitation of Ti, Mo, Sn and Sb in Ca–Al–Mg fluorides occurred when the sample was decomposed by the bomb method except for 100% Ca fluoride. Based on our coprecipitation observations, we have developed a simultaneous determination method for B, Ti, Zr, Nb, Mo, Sn, Sb, Hf and Ta by Q-pole type ICP-MS (ICP-QMS) and sector field type ICP-MS (ICP-SFMS). 9–50 mg of samples with Zr–Mo–Sn–Sb–Hf spikes were decomposed by HF using the bomb method and the ultrasonic method with B spike. The sample was then evaporated and re-dissolved into 0.5 mol l^− 1 HF, followed by the removal of fluorides by centrifuging. B, Zr, Mo, Sn, Sb and Hf were measured by ID method. Nb and Ta were measured by the ID-internal standardization method, based on Nb/Mo and Ta/Mo ratios using ICP-QMS, for which pseudo-FI was developed and applied. When 100% recovery yields of Zr and Hf are expected, Nb/Zr and Ta/Hf ratios may also be used. Ti was determined by the ID-internal standardization method, based on the Ti/Nb ratio from ICP-SFMS. Only 0.053 ml sample solution was required for measurement of all 9 elements. Dilution factors of ≤ 340 were aspirated without matrix effects. To demonstrate the applicability of our method, 4 carbonaceous chondrites (Ivuna, Orgueil, Cold Bokkeveld and Allende) as well as GSJ and USGS silicate reference materials of basalts, andesites and peridotites were analyzed. Our analytical results are consistent with previous studies, and the mean reproducibility of each element is 1.0–4.6% for basalts and andesites, and 6.7–11% for peridotites except for TiO₂.     

Partition coefficients of Hf,Zr, and REE between zircon,apatite, and liquid

Concentration ratios of Hf, Zr, and REE between zircon, apatite, and liquid were determined for three igneous compositions: two andesites and a diorite. The concentration ratios of these elements between zircon and corresponding liquid can approximate the partition coefficient. Although the concentration ratios between apatite and andesite groundmass can be considered as partition coefficients, those for the apatite in the diorite may deviate from the partition coefficients. The HREE partition coefficients between zircon and liquid are very large (100 for Er to 500 for Lu), and the Hf partition coefficient is even larger. The REE partition coefficients between apatite and liquid are convex upward, and large (D=10–100), whereas the Hf and Zr partition coefficients are less than 1. The large differences between partition coefficients of Lu and Hf for zircon-liquid and for apatite-liquid are confirmed. These partition coefficients are useful for petrogenetic models involving zircon and apatite.     

深部矿井水煤共采水文地质数值分析

针对兖州煤田下组煤深部开采受奥灰高承压水威胁以及当地大型煤化工企业生产用水量大的现状,在已进行的水文地质勘探及放水试验基础上,评价奥灰富水性,并采用有限差分法进行奥灰疏水降压数值模拟研究,提出水煤共采观点。研究结果表明:兖州煤田深部奥灰水压高,合理布置水煤共采孔,可以实现奥灰水位的有效疏降,疏降中心区水位最大降深可达110 m,突水系数显著下降,提高了下组煤开采的安全性;同时可提供煤化工43200 m3/d的供水量,能达到可持续的、水资源保护性的供水效果,实现下组煤的水煤共采。     

Distribution of Cu,Co, As,and Fe in mine waste,sediment, soil,and water in and around mineral deposits and mines of the Idaho Cobalt Belt,USA

The distribution of Cu, Co, As and Fe was studied downstream from mines and deposits in the Idaho Cobalt Belt (ICB), the largest Co resource in the USA. To evaluate potential contamination in ecosystems in the ICB, mine waste, stream sediment, soil, and water were collected and analyzed for Cu, Co, As and Fe in this area. Concentrations of Cu in mine waste and stream sediment collected proximal to mines in the ICB ranged from 390 to 19,000 μg/g, exceeding the USEPA target clean-up level and the probable effect concentration (PEC) for Cu of 149 μg/g in sediment; PEC is the concentration above which harmful effects are likely in sediment dwelling organisms. In addition concentrations of Cu in mine runoff and stream water collected proximal to mines were highly elevated in the ICB and exceeded the USEPA chronic criterion for aquatic organisms of 6.3 μg/L (at a water hardness of 50 mg/L) and an LC50 concentration for rainbow trout of 14 μg/L for Cu in water. Concentrations of Co in mine waste and stream sediment collected proximal to mines varied from 14 to 7400 μg/g and were highly elevated above regional background concentrations, and generally exceeded the USEPA target clean-up level of 80 μg/g for Co in sediment. Concentrations of Co in water were as high as in 75,000 μg/L in the ICB, exceeding an LC50 of 346 μg/L for rainbow trout for Co in water by as much as two orders of magnitude, likely indicating an adverse effect on trout. Mine waste and stream sediment collected in the ICB also contained highly elevated As concentrations that varied from 26 to 17,000 μg/g, most of which exceeded the PEC of 33 μg/g and the USEPA target clean-up level of 35 μg/g for As in sediment. Conversely, most water samples had As concentrations that were below the 150 μg/L chronic criterion for protection of aquatic organisms and the USEPA target clean-up level of 14 μg/L. There is abundant Fe oxide in streams in the ICB and several samples of mine runoff and stream water exceeded the chronic criterion for protection of aquatic organisms of 1000 μg/L for Fe. There has been extensive remediation of mined areas in the ICB, but because some mine waste remaining in the area contains highly elevated Cu, Co, As and Fe, inhalation or ingestion of mine waste particulates may lead to human exposure to these elements.     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

Dielectric constants of apatite,epidote, vesuvianite,and zoisite,and the oxide additivity rule

The dielectric constants and dielectric loss values of 4 Ca-containing minerals were determined at 1 MHz using a two-terminal method and empirically determined edge corrections. The results are: vesuvianitel κ′ _a=9.93 tan δ=0.006 κ′ _c=9.79 tan δ=0.005 vesuvianitel κ′ _a=10.02 tan δ=0.002 κ′ _c=9.85 tan δ=0.003 zoisite1 κ′ _a =10.49 tan δ=0.0006 κ′ _b =15.31 tan δ=0.0008 κ′ _c=9.51 tan δ=0.0008 zoisite2 κ′ _a =10.55 tan δ=0.0011 κ′ _b =15.45 tan δ=0.0013 κ′ _c=9.39 tan δ=0.0008 epidote κ′ ₁₁= 9.52 tan δ=0.0008 κ′ ₂₂=17.1 tan δ=0.0009 κ′ ₃₃= 9.37 tan δ=0.0006 fluorapatite1 κ′ _a =10.48 tan δ=0.0008 κ′ _c = 8.72 tan δ=0.0114 fluorapatite2 κ′ _a =10.40 tan δ=0.0010 κ′ _c=8.26 tan δ=0.0178 The deviation (δ) between measured dielectric polarizabilities as determined from the Clausius-Mosotti equation and those calculated from the sum of oxide polarizabilities according to α _D (mineral)=∑ α _D (oxides) for vesuvianite is ～ 0.5%. The large deviations of epidote and zoisite from the additivity rule with Δ=+ 10.1 and + 11.7%, respectively, are attributed to “rattling” Ca ions. The combined effects of both a large F thermal parameter and possible F-ion conductivity in fluorapatite are believed to be responsible for Δ=+2–3%. Although variation of oxygen polarizability with oxygen molar volume (V_o) is believed to affect the total polarizabilities, the variation of V_o in these Ca minerals is too small to observe the effect.     

Comparative study of As,Cd, Cu,Cr, Mg,Mn, Ni,Pb and Zn concentrations between sediment and water from estuary and port

The contents of As, Cd, Cu, Cr, Mg, Mn, Ni, Pb and Zn have been determined in sediment and water samples from Valle de las Garzas estuary and Port Manzanillo (Colima, Mexico) using ICP-AES. The concentrations of these elements were used for a comparative study to determine the distribution of heavy metals and to evaluate which elements reflect natural or anthropogenic backgrounds. For this purpose, seven sampling points were selected: Four of them correspond to the lagoon, and three were situated in the port. Statistical analysis of the mineral content was assessed. Initially, data comparison was assessed by statistical tests for each variable. Principal component analysis was then applied considering the influence of all variables at the same time by obtaining the distribution of samples according to their scores in the principal component space. In this way, four studies were carried out: (1) study of sediments collected during the dry season; (2) study of sediments collected during the rainy season; (3) comparative study between sediments from rainy and dry season; and (4) study of water composition collected during rainy season. From the results of the performed analyses, it can be concluded that metals distribution pattern reflected natural and anthropogenic backgrounds (e.g., sediments from the lagoon, situated at the beginning of the rain channel, presented high contents of Zn and Cu, perhaps related to anthropogenic activities or the influence of igneous sediments).