基于ASTER GED产品的地表发射率估算

地表发射率是地表温度反演的重要输入参数,为了解决现有地表发射率估算方法在裸露地表精度较差的问题,本文基于最新的ASTER全球地表发射率产品(ASTER GED)和基于植被覆盖度的方法(VCM),提出了一个改进的地表发射率估算方法。首先,利用ASTER GED产品求解裸土发射率,然后,利用ASTER波谱库中的植被发射率和植被覆盖度结合VCM方法计算地表发射率。利用张掖地区2012年11景ASTER TES算法反演的地表发射率产品和实测地表发射率数据进行了验证,同时利用一景Landsat 8 TIRS数据分析了对地表温度反演精度的影响。结果表明该方法估算的地表发射率整体精度较高,可以有效改进裸露地表的发射率估算精度,用于支持利用多种热红外传感器数据生产高精度的地表温度产品。     

Comparative analysis of different uni- and multi-variate methods for estimation of vegetation water content using hyper-spectral measurements

Assessment of vegetation water content is critical for monitoring vegetation condition, detecting plant water stress, assessing the risk of forest fires and evaluating water status for irrigation. The main objective of this study was to investigate the performance of various mono- and multi-variate statistical methods for estimating vegetation water content (VWC) from hyper-spectral data. Hyper-spectral data is influenced by multi-collinearity because of a large number of (independent) spectral bands being modeled by a small number of (dependent) biophysical variables. Therefore, some full spectrum methods that are known to be suitable for analyzing multi-collinear data set were chosen. Canopy spectral reflectance was obtained with a GER 3700 spectro-radiometer (400–2400 nm) in a laboratory setting and VWC was measured by calculating wet/dry weight difference per unit of ground area (g/m²) of each plant canopy (n = 95). Three multivariate statistical methods were applied to estimate VWC: (1) partial least square regression, (2) artificial neural network and (3) principal component regression. They were selected to minimize the problem related to multi-collinearity. For comparison, uni-variate techniques including narrow band ratio water index (RWI), normalized difference water index (NDWI), second soil adjusted vegetation index (SAVI2) and transferred soil adjusted vegetation index (TSAVI) were applied. For each type of vegetation index, all two-band combinations were evaluated to determine the best band combination. Validation of the methods was based on the cross validation procedure and using three statistical indicators: R², RMSE and relative RMSE. The cross-validated results identified PLSR as the regression model providing the most accurate estimates of VWC among the various methods. The result revealed that this model is highly recommended for use with multi-collinear datasets ($R_{\text{CV}}^2=0.94$, RRMSE_CV = 0.23). Principal component regression exhibited the lowest accuracy among the multivariate models ($R_{\text{CV}}^2=0.78$, RRMSE_CV = 0.41).     

Soil moisture retrieval from airborne L-band passive microwave using high resolution multispectral data

For the soil moisture retrieval from passive microwave sensors, such as ESA’s Soil Moisture and Ocean Salinity (SMOS) and the NASA Soil Moisture Active and Passive (SMAP) mission, a good knowledge about the vegetation characteristics is indispensable. Vegetation cover is a principal factor in the attenuation, scattering and absorption of the microwave emissions from the soil; and has a direct impact on the brightness temperature by way of its canopy emissions. Here, brightness temperatures were measured at three altitudes across the TERENO (Terrestrial Environmental Observatories) Rur catchment site in Germany to achieve a range of spatial resolutions using the airborne Polarimetric L-band Multibeam Radiometer 2 (PLMR2). The L-band Microwave Emission of the Biosphere (L-MEB) model which simulates microwave emissions from the soil–vegetation layer at L-band was used to retrieve surface soil moisture for all resolutions. A Monte Carlo approach was developed to simultaneously estimate soil moisture and the vegetation parameter b’ describing the relationship between the optical thickness τ and the Leaf Area Index (LAI). LAI was retrieved from multispectral RapidEye imagery and the plant specific vegetation parameter b′ was estimated from the lowest flight altitude data for crop, grass, coniferous forest, and deciduous forest. Mean values of b’ were found to be 0.18, 0.07, 0.26 and 0.23, respectively. By assigning the estimated b′ to higher flight altitude data sets, a high accuracy soil moisture retrieval was achieved with a Root Mean Square Difference (RMSD) of 0.035 m³ m⁻³ when compared to ground-based measurements.     

MODIS增强型植被指数EVI与NDVI初步比较

利用东亚地区典型地带性植被和MODIS数据，对广泛使用的植被指数NDVI和新开发的增强型植被指数EVI进行了对比分析。由MODIS开发的NDVI和EVI对干旱-半湿润环境下低覆盖植被的描述能力相似，但对湿润环境下高密度植被的描述有明显差别：NDVI年时间过程的季节性不明显，表现为全年高平的曲线；而EVI仍然有季节性，表现为钟形曲线，与月平均温度关系更密切。EVI的这一特征为研究高覆盖植被的季节性变化提供了新的思路。     

数据驱动的蒸散发遥感反演方法及产品研究进展

蒸散发是水圈、大气圈和生物圈中水分循环和能量交换的纽带。在全球尺度上,蒸散发约占陆地降水总量的60%;作为其能量表达形式,潜热通量约占地表净辐射的80%。随着通量观测技术的发展,全球长期持续的观测数据得以获取和共享,近年来基于数据驱动的蒸散发遥感反演方法取得了较好的研究进展。本文针对数据驱动的蒸散发遥感反演方法和产品,从经验回归、机器学习和数据融合3个方面展开,对现有的研究进展进行了梳理、归纳和总结,并从驱动数据、反演方法、已有产品等方面指出目前仍存在的问题和不足。未来仍需开展数据驱动的高时空分辨率的蒸散发遥感反演方法的研究,有效考虑地表温度和土壤水分等可以指示地表蒸散发短期变化的重要信息,同时加强基于过程驱动的物理模型与数据驱动的模型的结合,使两类模型能互为补充、各自发挥所长,共同推动蒸散发遥感反演研究水平的进步。     

耦合双时相与邻近像元信息的极轨卫星地表组分温度反演

与混合像元的地表温度相比,植被和土壤的组分温度具有更明确的物理意义。因此,本文提出了一种从具有广泛应用的极轨卫星地表温度产品中分离出植被和土壤组分温度的算法。该算法使用温度日变化模型作为桥梁连接极轨卫星一日内的两次观测,利用多像元数据进行模型求解,从而得到过境时刻的地表植被和土壤组分温度。论文针对MODIS数据开展了地表组分温度的反演,并利用实测站点数据和高分辨率卫星数据对反演结果进行了验证。结果表明,该算法可以提供合理的植被和土壤组分温度信息,反演温度的误差变化范围为1.4 K到2.5 K。此外,对观测时刻组合方式的分析表明该算法只需要一次白天观测和一次夜晚观测就可以得到精度较好的分离结果,并且两次观测可以来自于不同传感器,进一步表明了算法具有良好的可操作性。