Dating faulted alluvial fans with cosmogenic 10Be in the Gurvan Bogd mountain range (Gobi-Altay, Mongolia): climatic and tectonic implications

The Gurvan Bogd mountain range is a fault system characterized by strong earthquakes (M ∼ 8) separated by long periods of quiescence. Further to the previous works in the area, our study provides new data concerning the tectonic and climatic processes in the Gobi-Altay. To quantify the slip rates along the faults, we dated offset alluvial fans analysing the in situ produced ¹⁰Be along profiles at depth. The slip rates along the Bogd strike–slip fault and its associated thrust faults over the Upper Pleistocene–Holocene period are 0.95 ± 0.29 mm yr⁻¹ and comprised between 0.12 ± 0.02 and 0.13 ± 0.02 mm yr⁻¹, respectively. The surfaces ages account for a cyclic formation of the fans over the past ∼360 ka, in correlation with the terminations of the marine isotope stages 2, 6, 8 and 10.     

米仓山构造转换带特征及转换模式

米仓山构造带被北东走向的龙门山陆内复合造山带及北北西走向的大巴山前陆冲断带夹持于其间,两个构造带平面上组成一个“八”字形构造,空间上为一个向北收敛,向南发散背倾型的Ⅰ型三角带构造.在两大构造带前展式扩展变形晚期的过程中,米仓山则起到调节这两大构造带构造平衡的作用,因此为一构造转换带.米仓山构造转换带由北向南可以分为基底...     

塔里木巴楚隆起北缘吐木休克楔形基底卷入构造

石油地震资料揭示出塔里木盆地中央巴楚隆起为结晶基底和古生代地层相对隆升区,多数地区缺失中新生界,顶部为第四系陆相碎屑岩不整合覆盖隐伏隆起。在隆起南北两侧构造变形比较强烈,均发育基底卷入的逆冲构造和古生界内逆冲构造。运用断层相关褶皱理论,通过对研究区的二维地震测网解释及钻井标定,综合研究得出巴楚隆起北侧吐木休克卷入基底逆冲断层倾向南,向北逆冲,前寒武系基底到早古生代地层被错断。新生代时期的生长地层特征指示基底卷入构造于古近纪、中新世-上新世和更新世均有活动。构造分析表明基底卷入构造于中生代末期还有一次活动,说明吐木休克构造由多期构造运动形成。向北逆冲的吐木休克基底断层和盖层褶皱构造的向南反冲逆冲断层或滑脱断层共同组成基底卷入楔形构造,楔形点同时位于基底和盖层中。盖层构造以中寒武统膏岩为滑动面,向南逆冲,发育断层扩展或滑脱背斜构造。基底断层和盖层滑脱断层在剖面上组成典型的楔形构造几何形态,平面上形成三角形构造。地震剖面综合解释成果图显示,吐木休克弧形逆冲构造东部盖层反冲构造,即基底卷入楔形构造表现较为清楚,向西则表现不太明显,但地震反射波组(地层转折)指示盖层中仍存在这些反冲构造。纵向地震剖面和联络地震剖面均显示出存在该类构造。吐木休克基底卷入断层弧形构造顶部位移最大,盖层变形相对最小;向东西两侧基底断层位移逐渐减小,盖层构造位移相应逐渐增加。研究认为,塔里木巴楚隆起系挤压作用下,刚性地壳发生挠曲而形成的变形区带。     

Structural Characteristics and Formation Mechanism in the Micangshan Foreland,South China

Lying at the junction of the Dabashan, Longmenshan and Qinling mountains, the Micangshan Orogenic Belt coupled with a basin is a duplex structure and back-thrust triangular belt with little horizontal displacement, small thrust faults and continuous sedimentary cover. On the basis of 3D seismic data, and through sedimentary and structural research, the Micangshan foreland can be divided into five subbelts, which from north to south are: basement thrust, frontal thrust, foreland depression-back-thrust triangle, foreland fold belt or anticline belt, and the Tongjiang Depression. Along the direction of strike from west to east, the arcuate structural belt of Micangshan can be divided into west, middle and east segments. During the collision between the Qinling and Yangtze plates, the Micangshan Orogenic Belt was subjected to the interaction of three rigid terranes: Bikou, Foping, and Fenghuangshan (a.k.a. Ziyang) terranes. The collision processes of rigid terranes controlled the structural development of the Micangshan foreland, which are: (a) the former collision between the Micangshan-Hannan and Bikou terranes forming the earlier rudiments of the structure; and (b) the later collision forming the main body of the structural belt. The formation processes of the Micangshan Orogenic Belt can be divided into four stages: (1) in the early stage of the Indosinian movement, the Micangshan-Hannan Rigid Terrane was jointed to the Qinling Plate by the clockwise subduction of the Yangtze Plate toward the Qinling Plate; (2) since the late Triassic, the earlier rudiments of the Tongnanba and Jiulongshan anticlines and corresponding syncline were formed by compression from different directions of the Bikou, Foping and Micangshan-Hannan terranes; (3) in the early stage of the Himalayan movement, the Micangshan-Hannan Terrane formed the Micangshan Nappe torwards the foreland basin and the compression stresses were mainly concentrated along both its flanks, whereas the Micangshan-Hannan Terrane wedged into the Qinling Orogenic Belt with force; (4) in the late stage of the Himalayan movement, the main collision of the Qinling Plate made the old basement rocks of the terrane uplift quickly, to form the Micangshan Orogenic Belt. The Micangshan foreland arcuate structure was formed due to the non-homogeneity of terrane movement.     

Control of syntectonic erosion and sedimentation on kinematic evolution of a multidecollement fold and thrust zone: Analogue modeling of folding in the southern subandean of Bolivia

Several analogue modeling studies have been conducted during the past fifteen years with the aim to discuss the effects of sedimentation and erosion on Foreland Fold and Thrust Belt, among which a few have analyzed these processes at kilometric scale (Malavieille et al., 1993; Nalpas et al., 1999; Barrier et al., 2002; Pichot and Nalpas, 2009). The influence of syn-deformation sedimentation and erosion on the structural evolution of FFTB has been clearly demonstrated. Here, we propose to go further in this approach by the study of a more complex system with a double decollement level. The natural study case is the Bolivian sub-Andean thrust and fold belt, which present all the required criteria, such as the double decollement level. A set of analogue models performed under a CT-scan have been used to test the influence of several parameters on a fold and thrust belt system, among which: (i) the spatial variation of the sediment input, (ii) the spatial variation of the erosion rate, (iii) the relative distribution of sedimentation between foreland and hinterland. These experiments led to the following observations:

• 1. The upper decollement level acts as a decoupling level in case of increased sedimentation rate: it results in the verticalization of the shallower part (above the upper decollement level), while the deeper parts are not impacted.
• 2. Similarly, the increase of the erosion rate involves the uplift of the deeper part (below the upper decollement level), whereas the shallower parts are not impacted.
• 3. A high sedimentation rate in the foreland involves a fault and fold vergence reversal, followed by a back-thrusting of the shallower part.
• 4. A high sedimentation rate in the hinterland favours thrust development toward the foreland in the shallower parts.

     

Rates and causes of recent global sea-level rise inferred from long tide gauge data records

Tide gauge data at seven sites of the Permanent Service for Mean Sea Level (PSMSL), with information for relative sea-level during the past 140–200 yr, were analyzed to examine the rates and causes of the global sea-level rise (GSLR) during the twentieth century. By subtracting linear trends for relative sea-level rise during the past 100 yr from the observed data, we get the apparent GSLRs of ∼1 mm yr⁻¹ for five sites around the Baltic Sea and Brest. The rate for San Francisco is significantly larger than this, with an optimum value ∼2 mm yr⁻¹. The spatial difference of ∼1 mm yr⁻¹ between these sites is reasonably explained by the recent melting of the Greenland ice sheet with an equivalent sea-level rise of ∼1 mm yr⁻¹. The predicted relative sea-level change for this melting scenario is 0.5 mm yr⁻¹ at sites around the Baltic Sea and Brest, and 1.5 mm yr⁻¹ for San Francisco. The residuals between observations and predictions, ∼0.5 mm yr⁻¹ at all sites, may be contributed by thermal expansion of seawater and/or other melting sources. These results suggest the rate of twentieth-century GSLR to be 1.5 mm yr⁻¹.     

The Uplift of the Longmenshan Thrust Belt and Subsidence of the West Sichuan Foreland Basin

Based on fission track dating of apatite, and measurement of vitrinite reflectance of rock samples from the Longmenshan (Longmen Mountain)area and the West Sichuan foreland basin and computer modelling it is concluded that (l)the Songpan-Garze fold belt has uplifted at least by 3-4 km with an uplift rate of no less than 0.3-0.4 mm/a since 10 Ma B.P.; (2) the Longmenshan thrust nappe belt has uplifted at least by 5-6 km with an uplift rate of more than 0.5- 0.6 mm /a since 10 Ma B.P.; (3) the Longmenshan detachment belt has uplifted by 1 - 2 km at a rate of 0.016-0.032 mm/a since 60 Ma B.P.; (4) the West Sichuan foreland basin has uplifted by 1.7-3 km at a rate of 0.028-0.05 mm/a since 60 Ma B.P.; (5) the uplift rate of the area on the west side of the Beichuan-Yingxiu-Xiaoguanzi fault for the last 10 Ma is 40 times as much as that on its east side; (6) the uplifting of the the Songpan - Garze fold belt and the subsidence of the West Sichuan foreland basin 60 Ma ago exhibit a mirro-image correlation, i.e     

Sedimentary facies and soft-sediment deformation structures in the late miocene-pliocene Middle Siwalik subgroup,eastern Himalaya,Darjiling District,India

The Himalayan fold-and-thrust belt has propagated from its Tibetan hinterland to the southern foreland since ∼55 Ma. The Siwalik sediments (∼20 - 2 Ma) were deposited in the frontal Himalayan foreland basin and subsequently became part of the thrust belt since ∼ 12 Ma. Restoration of the deformed section of the Middle Siwalik sequence reveals that the sequence is ∼325 m thick. Sedimentary facies analysis of the Middle Siwalik rocks points to the deposition of the Middle Siwalik sediments in an alluvial fan setup that was affected by uplift and foreland-ward propagation of Greater and Lesser Himalayan thrusts. Soft-sediment deformation structures preserved in the Middle Siwalik sequence in the Darjiling Himalaya are interpreted to have formed by sediment liquefaction resulting from increased pore-water pressure probably due to strong seismic shaking. Soft-sediment structures such as convolute lamination, flame structures, and various kinds of deformed cross-stratification are thus recognized as palaeoseismic in origin. This is the first report of seismites from the Siwalik succession of Darjiling Himalaya which indicates just like other sectors of Siwalik foreland basin and the present-day Gangetic foreland basin that the Siwalik sediments of this sector responded to seismicity.     

The Punjab foreland basin of Pakistan: a reinterpretation of zircon fission‐track data in the light of Miocene hinterland dynamics

Sedimentary basins represent an archive of tectonic events of the hinterland source regions. By determining the variation in sediment lagtime over time, events can be distinguished which may no longer be available as the source has been eroded. In regions characterized by rapid exhumation this is most often the case but the erosion products form a record of these events. Detrital zircon fission‐track ages from sediments of the Siwalik basin, Pakistan, originally presented by Cerveny et al. (New Perspectives in Basin Analysis, Springer‐Verlag, New York, 1988, p. 43), have been reinvestigated and reinterpreted using a revised methodological approach. Detrital age populations were determined from different stratigraphic levels and were correlated through time in order to assess the change in lag time over the stratigraphic section. This information was combined with the many new ages from the hinterland to further interpret events in the source region. The new investigation suggests that steady‐state evolution has not always existed. An overall trend of exhumation increasing by 0.1 mm Myr^?1 (from 0.9 to 2.65 mm yr^?1) from 18 Ma to the present is evident with a major exception of a net pulse between 11.7 and 10.9 Ma associated with an increase in sedimentation increasingly rich in hornblende. Earlier studies suggested that at this time the source of the sediments was the presently outcropping Kohistan Arc. We are able to demonstrate that this cannot be so but was rather the rapidly exhuming Nanga‐Parbat Haramosh syntaxis (> 2 mm yr^?1) coevally with transpressional displacement along the Main Karakorum Thrust, whereby the overlying Kohistan Arc sequences were removed. Furthermore, comparison of our detrital thermochronological data set with another one from the same basin and one from another foreland basin to the east, in NW India suggest that the Himalayan orogenesis was probably not synchronous for the late Early–Middle Miocene. Overall, regions that undergoes today's rapid uplift may be useless to reconstruct earlier phases of exhumation as the levels that may have yielded such info were eroded and deposited into the adjacent basin(s). Such scenario is reproducible in most orogens as in the Himalaya in NW Pakistan stressing the high potential of detrital thermochronological studies to trace hinterland dynamics. Terra Nova, 18, 248–256, 2006     

Identification of an underfilled foreland basin system in the Upper Devonian of the Central Pyrenees: implications for the Hercynian orogeny

A foreland basin succession has been identified in the Frasnian of the Central Pyrenees. This succession comprises a carbonate-dominated transgressive system which recorded the cratonward migration of the foreland basin subsidence, and siliciclastic depocenters which recorded the progression of the thrust-fold deformation. The foreland basin system has always been maintained in deep-marine environments, i.e., at an underfilled depositional state. It was associated with a thrust wedge which descended toward a deep-marine hinterland, i.e., with a type of orogenic wedge usually related to subduction zones. The Frasnian foreland basin system differs from the one known in the Carboniferous which evolved to overfilled depositional state and was associated with a thrust wedge rising toward a mountainous hinterland. Consequently, the Hercynian orogeny in the Pyrenees seems to result first, from a Frasnian thrusting controlled by a subduction zone located north of the Pyrenees, and second, from a Carboniferous thrusting controlled by the surrection of a frontal thrust belt in the Pyrenees. The association of underfilled foreland basin systems and hinterland-dipping thrust wedges, as exemplified in the Frasnian of the Pyrenees, can be interpreted as illustrative of the initial stages of thrust-wedge growth in deep-marine settings.     

Structural Characteristics and Formation Mechanism in the Micangshan Foreland,South China

Lying at the junction of the Dabashan,Longmenshan and Qinling mountains,the Micangshan Orogenic Belt coupled with a basin is a duplex structure and back-thrust triangular belt with little horizontal displacement,small thrust faults and continuous sedimentary cover.On the basis of 3D seismic data,and through sedimentary and structural research,the Micangshan foreland can be divided into five subbelts,which from north to south are:basement thrust,frontal thrust,foreland depression-back-thrust triangle,fore...     

Extensional tectonic activity in the cratonward parts (peripheral bulge) of the Ganga Plain foreland basin,India

Flexural subsidence of the Indian lithosphere created the foreland basin in front of the emerging Himalayan mountain belt. The continued northward push of the Indian plate and thrust sheet loading in the Himalayan orogen caused an up-warping along its cratonward margin, in the form of a regional gentle bulge. In the cratonward peripheral bulge small-scale to moderate size deformation features, e.g., gentle folds (up-arching of the sediment layers), extensional normal faults and uplifted tilted blocks, and incised river channels with 20-60-m-high cliffs, developed. Cliff sections of many rivers in this cratonward part of the foreland basin expose deposits of latest Pleistocene-Holocene age and show evidences of active tectonics in the last few thousand years: vertical uplift leading to deep incision of the river system, development of prominent fractures cutting through the sedimentary succession, bending and tilting of the strata, and tilted blocks. In the Late Quaternary relaxation phase of the Himalayan orogen-foreland, there is increased vertical tectonic activity in the region of the peripheral bulge. The vertical uplift in this part of the Ganga Plain foreland basin caused the rivers (including the axial rivers) to make further deep incision without shifting from their courses. During periods of increased tectonic activity in the Himalayan region, i.e., the addition of thrust slices more rapidly, probably caused the maximum down-bending in the proximal part of the Ganga plain foreland basin. The high amplitude and asymmetric nature of this foreland basin is partly controlled by extensional tectonism.     

Rapid cooling of the Yanshan Belt,northern China: Constraints from 40Ar/39Ar thermochronology and implications for cratonic lithospheric thinning

The Yanshan Orogenic Belt is located in the northern part of the North China Craton (NCC), which lost ∼120 km of lithospheric mantle during Phanerozoic tectonic reactivation. Mesozoic magmatism in the Yanshan fold-and-thrust belt began at 195–185 Ma (Early Jurassic), with most of the granitic plutons being Cretaceous in age (138–113 Ma). Along with this magmatism, multi-phase deformational structures, including multiple generations of folds, thrust and reverse faults, extensional faults, and strike-slip faults are present in this belt. Previous investigations have mostly focused on geochemical and isotopic studies of these magmatic rocks, but not on the thermal history of the Mesozoic plutons. We have applied ⁴⁰Ar/³⁹Ar thermochronology to biotites and K-feldspars from several Lower Cretaceous granitic plutons to decipher the cooling and uplift history of the Yanshan region. The biotite ⁴⁰Ar/³⁹Ar ages of these plutons range from 107 to 123 Ma, indicating that they cooled through about 350 °C at that time. All the K-feldspar step-heating results modeled using multiple diffusion domain theory yield similarly rapid cooling trends, although beginning at different times. Two rapid cooling phases have been identified at ca. 120–105 and 100–90 Ma. The first phase of rapid cooling occurred synchronously with widespread extensional deformation characterized by the formation of metamorphic core complexes, A-type magmatism, large-scale normal faults, and the development of half-graben basins. This suggests rapid exhumation took place in an extensional regime and was a shallow-crustal-level response to lithospheric thinning of the NCC. The second phase of rapid cooling was probably related to the regional uplift and unroofing of the Yanshan Belt, which is consistent with the lack of Upper Cretaceous sediments in most of the Yanshan region.     

Geomorphic evidence of active deformation and uplift in a modern continental wedge-top–foredeep transition: Example of the eastern Ecuadorian Andes

The eastern Ecuadorian Andes appear as a fold-and-thrust belt adjacent to a continental foredeep represented by one of the world's largest tropical alluvial megafans, the Pastaza megafan, debouching into the Amazonian lowland. The apex of the Pliocene–Pleistocene megafan situated in the present-day wedge top (Subandean Zone) has been cut by an erosion surface, the western part of which has been uplifted of 500 m along the frontal thrust, forming a poorly dissected plateau, the Mera plateau. This erosion surface erased most of the previous fluvial landscape but preserved a large thrust-related anticlinal hinge deforming less erodible underlying strata, the Mirador fold and smaller-sized anticlines. This surface has been then incised by two antecedent major rivers, the Pastaza and the Napo, and few tributaries. The plateau edge is marked by a series of large scale gently sloping landslides clustered along a 70 km long concave eastward line associated with the frontal thrust fault. The newly formed immature rivers issued from the landslides or sourced within east-dipping remnants of the erosion surface downstream of the landslide line constitute the greatest part of the streams feeding the Ecuadorian Amazonian basin. At 70 to 100 km from the landslide line, the drainage abruptly changes from highly immature to mature with a well-defined hinge line representing the outer limit of landslide and tectonic control. The diversions of the Pastaza River indicate ongoing fold growth since at least the late Pleistocene in the Eastern Cordillera, and the early Holocene in the Mera plateau. The preserved terraces of the Pastaza valley are all degradational and are ascribed to periods of tectonic (seismic) activity alternating with periods of tectonic quiescence or decreased seismic activity rather than to climatic events. ¹⁴C dating of the plateau erosion surface and of the upper Pastaza terraces indicates that the minimum average incision rate since 18,000 years BP varies locally in the upper Pastaza valley from 0.5 to 0.67 cm year⁻¹ , increasing from 18,000 years BP to now. A comparison of these incision rates with fold-and-thrust fault uplift rates indicates that incision in the upper Pastaza valley was a result of rapid uplift (up to 1 cm year⁻¹) along the Mirador fold-and-thrust which caused a restoration of the local equilibrium profile of the upper reach, combined with smaller local fault uplift along the westernmost thrust faults. The uplift of the whole Mera plateau with respect to the upper Amazonian basin gives a minimum average uplift rate of 2.8 cm year⁻¹ since 18,000 years BP. The overall uplift of the Mera plateau and the Eastern Cordillera is likely to have been caused by a regional-scale low angle thrust ramp emerging as the frontal thrust fault.     

青藏高原东缘龙门山前陆逆冲带复合结构与生长

位于青藏高原东缘的北东向龙门山逆冲带,研究已经证明是中生代与新生代前陆复合扩展和生长的结果。然而,2008年5·12汶川地震地表破裂、余震和滑坡等的单向和分段迁移现象,对龙门山复合逆冲带的结构认识提出了挑战。文章在已有研究成果基础上,针对龙门山复合生长下构建的特殊结构进行了野外调查和构造解析。结果表明,以中生代与新生代两期前陆逆冲带复合生长为基础,龙门山复合逆冲带具有特殊的、主要由前陆逆冲楔叠加后形成的复合结构,而且这种复合逆冲楔具有分级和时序特征;中生代前陆逆冲楔是以逆冲断层-褶皱为特征,并分别组合形成碧口厚皮逆冲推覆体、唐王寨薄皮逆冲推覆体和龙王庙逆冲推覆体,总体从晚三叠世以前开始,至~160 Ma向南递进扩展生长;新生代前陆逆冲楔由逆冲断层和逆冲岩片组成,分为约35~10 Ma和10 Ma以来两个阶段,向南东向递进扩展生长,并可能与川西盆地东侧龙泉山构造相连通。因此,龙门山逆冲带具有前陆逆冲带和生长过程的双重复合结构。      

Migration and shortening rates in the northern Apennines,Italy: implications for seismic hazard

Is compression across the northern Apennine fold‐and‐thrust system (Italy) still active? To address this question, we quantified the long‐term rates of migration and shortening of the system along with the measurement errors. Our approach integrates structural geology, seismicity patterns, and statistical treatment of tectonic activity. On the basis of recently published surface and subsurface data, we found a migration rate of 8.85 ± 0.61 mm yr⁻¹. The inception age of individual fold structures follow closely this average rate, indicating that the system has been migrating at a constant rate for the past 17 Myr. Cumulative shortening of the system also increases linearly through time at 2.93 ± 0.31 mm yr⁻¹. The location of the youngest structures in the easternmost portion of the system coincides with a significant peak of seismic moment released by historical earthquakes. We conclude that not only these easternmost thrusts are still active, but also that they generate earthquakes.     

塔里木盆地中南部麻扎塔格逆冲—褶皱带变形特征及其意义

麻扎塔格地区地层、地貌及构造变形特征的研究,对于认识塔里木盆地新生代构造演化过程、塔里木—西昆仑的盆山耦合关系、新构造运动对塔里木油气资源分布的影响以及塔克拉玛干沙漠的气候、环境变化都具有重要意义。本文通过卫星照片解译、野外变形观察、剖面实测、地球物理资料解释等手段,对该地区晚新生代的构造特征进行了研究,确定了麻扎塔格构造带为典型的逆冲—褶皱带,并探讨了麻扎塔格逆冲—褶皱带的构造指向、活动时限、隆升速率及缩短速率、东西方向的延伸等问题,取得如下认识:1)麻扎塔格逆冲—褶皱带为西昆仑山前陆褶皱冲断带的前缘部位,和田河气田就是处在逆冲前锋背斜顶部,晚新生代变形作用已明显地改造了塔里木盆地南部及中部的古生代和中生代构造,并促成了和田河气田的形成;2)麻扎塔格山在中新世末(约7 Ma)和中更新世(约780 ka B.P.)经历了两次构造隆升,后一次形成了麻扎塔格逆冲—褶皱带和麻扎塔格山现今的地貌特征;3)估算出麻扎塔格逆冲—褶皱带中更新世以来的隆升速率约为0.26～0.4 mm/a,缩短速率约为0.9 mm/a;4)认为麻扎塔格逆冲—褶皱带向西应与同属西昆仑山前褶皱—冲断带前缘的喀什背斜相连,东端的突然消失可能是由于东段和田河附近存在北东—南西向的走滑断层造成。     

库车前陆冲断带克拉苏构造带变形影响因素分析——基于离散元数值模拟研究

在解释库车前陆冲断带克拉苏构造带三维地震剖面的基础上,采用离散元数值模拟手段、单因素变量控制方法,通过六组模拟对比实验,探讨挤压背景下应变速率大小和作用时间、盐岩展布形态、先存盐底辟、基底先存断裂以及基底古隆起等因素,对库车前陆冲断带克拉苏构造带变形的影响。离散元数值模拟结果表明:相比于应变速率大小,应力作用时间对冲断带变形的影响更为显著,变形缩短率相同时导致挤压隆升幅度更大,可达70.25%,向前传播距离均更远,横向上变形范围可达73.82%,盐下层叠瓦状逆冲断裂倾角更小。先存底辟主要影响挤压端垂向变形规模,使得隆升幅度更大。先存断裂主要影响挤压端水平方向变形范围,挤压变形水平传播更远。基底古隆起和盐岩展布形态对克拉苏构造带变形也具有重要影响,基底隆起前沿形成应力集中带,盐岩在此聚集形成构造三角带。由于盐岩的分隔作用,盐上层变形相对较弱,靠近挤压端发育背斜和冲断构造,向盆地方向逐渐变为宽缓的向斜构造。     

Implications of the fault scaling law for the growth of topography: mountain ranges in the broken foreland of north-east Tibet

A fault scaling law suggests that, over eight orders of magnitude, fault length L is linearly related to maximum displacement D. Individual faults may therefore retain a constant ratio of D/L as they grow. If erosion is minor compared with tectonic uplift, the length and along‐strike relief of young mountain ranges should thus reflect fault growth. Topographic profiles along the crests of mountain ranges in the actively deforming foreland of north‐east Tibet exhibit a characteristic shape with maximum height near their centre and decreasing elevation toward the tips. We interpret the along‐strike relief of these ranges to reflect the slip distribution on high‐angle reverse faults. A geometric model illustrates that the lateral propagation rate of such mountain ranges may be deciphered if their length‐to‐height ratio has remained constant. As an application of the model, we reconstruct the growth of the Heli Shan using a long‐term uplift rate of ～1.3 mm yr^?1 derived from ²¹Ne and ¹⁰Be exposure dating.     

Gravity change, geoid change and remaining postglacial uplift of Fennoscandia

The result obtained hitherto on the Fennoscandian land uplift gravity line indicates that the postglacial uplift process might be more complicated than a pure horizontal flow of mantle (‘Bouguer model’). Simple formulae, valid for a more arbitrary model, are developed for the change of the geoid and for the remaining land uplift. Numerical applications yield a geoid change of about 0.4 mm yr^-1 and a remaining land uplift of the order of 50 m, but the latter quantity is very difficult to determine with reasonable accuracy.