Petrographic and Geochemicial Characteristics of the K?z?loren Formation (Upper Triassic-Lower Jurassic) in the Akp?nar (Konya, Turkey) Area

This paper describes the occurrence of dolomite and the mechanism of dolomitization of the Upper Triassic-Lower Jurassic K?z?loren Formation in the autochthonous Bolkardag? unit of the middle Taurus Mountains in south western Turkey. Dolomites were analyzed for geochemical, isotopic and crystallographic variation. Dolomites occur as a replacement of precursor carbonate and cement. The dolomite crystals range from <10 to ~1000 μm existing as both replacements and cements. Sr concentrations range between 84 and 156 ppm, and the molar Sr/Ca ratios of dolomitizing fluids are estimated to range between 0.0066 to 0.013 ratios. Dolomites are Ca-rich (with average CaCO3 and MgCO3 equal to 56.43 and 43.57 mol%, respectively) and they are non-stoichiometric, with an average Sr=116 ppm, Na=286 ppm, Mn=81 ppm, Fe=1329 ppm, and δ18O and δ13C ranges from –0.6‰ to –6.1‰ Pee Dee Belemnite [PDB], and +1.2 to +3.9‰ PDB. The North American Shale Composition [NASC]-normalized rare earth element (REE) values of the both limestone and dolomite sample groups show very similar REE patterns characterized by small positive Eu (mean=1.32 and mean=1.42, respectively) and slightly or considerably negative Ce (mean=0.61 and mean=0.72, respectively) anomalies and a clear depletion in all REE species. The K?z?loren Formation dolomites have been formed as early diagenetic from mixing zone fluids at the tidal-subtidal environment and at the late diagenetic from basinal brines at the shallow-deep burial depths.     

Tectonic setting and petrogenesis of the Çelebi granitoid, (Kırıkkale-Turkey) and comparison with world skarn granitoids

Many studies have shown systematic correlations between the composition of plutons worldwide and the metal content of associated skarns. This is the first report of similar correlations between the composition of Çelebi granitoid and skarns of the Çelebi district in Central Anatolia, Turkey. The Çelebi district is well known for its polymetallic Fe–W and Cu vein ores. These are hosted by calcic skarn zones. Both exoskarns (pyroxene–garnet) and endoskarns (epidote–pyroxene) occur in the district formed mainly along the granitoid contacts and along the fractures within the marble. Based on mineralogy, petrology and geochemistry, two different igneous rocks were recognized in the Çelebi granitoid, referred to as leucocratic (felsic) and mesocratic (intermediate) Çelebi granitoid. The leucocratic Çelebi occurs as dominant rock type, and is classified as granite. The mesocratic Çelebi is not widespread and is classified as adamellite, tonalite, quartz monzonite and quartz monzodiorite. The mesocratic Çelebi has I-type characteristics, and have subalkaline, calc-alkaline and metaluminous characteristics like most worldwide skarn granitoids.A post-collisional tectonic setting is proposed on the basis of field evidence, the relative timing of intrusions with respect to metamorphic and obducted ophiolitic rocks and trace element geochemistry. The high abundance of La and Ce and the enrichment of V in mafic components suggest that Çelebi granitoids are formed by partial melting of mantle rocks, but have been contaminated by interaction with continental crust involving possible magma mixing processes (i.e. mixing of coexisting felsic and mafic magmas). In the district, the mesocratic type and mafic microgranular enclaves (MME) mainly within leucocratic type represent a mafic underplating magma that was mixed with and/or injected into felsic magma of the leucocratic type.The present study shows that Fe mineralization is associated with mesocratic Çelebi type, whereas W mineralization is associated with leucocratic type. Mesocratic Çelebi granitoid is significantly different from the worldwide average of plutons associated with Fe skarns. In particular, MgO vs. SiO₂, FeOt+CaO+Na₂O/K₂O vs. SiO₂, Fe₂O₃/Fe₂O₃+FeO vs. SiO₂ and V vs. Ni vary from typical values (are lower than values typical for plutons associated with Fe skarns) for plutons associated with Fe skarns. Instead, it resembles the geochemical characteristics of plutons associated with worldwide Cu and possibly Au skarns. This suggests new exploration possibilities for copper and gold in the Çelebi district.     

Textural and mineralogical evidence for a Cadomian tectonothermal event in the eastern Mediterranean (Sandıklı-Afyon area, western Taurides, Turkey)

In the Sandıklı-Afyon area, the very low-grade metamorphic Sandıklı Basement Complex with clastic sediments and Late Neoproterozoic felsic igneous rocks are unconformably overlain by a cover succession with red continental clastic rocks, tholeiitic basalts and siliciclastic rocks with Early Cambrian trace fossils. Illite crystallinity studies reveal that both the basement and cover units were metamorphosed at high anchizonal to epizonal conditions ( 300 °C). Textural data together with the detailed evaluation of the P–T–b₀ grid, however, indicate that this thermal event has multiple phases. The first tectonothermal event was realized at pressures of  4.2 kb on the basis of b₀-data and resulted in development of blastomylonites. This is supported by the presence of dynamo-metamorphosed pebbles within the basal conglomerates of the Lower Paleozoic cover series. The second event is post-Ordovician–pre-Jurassic in age, occurred at lower pressures  3.2 kb and produced a weakly developed cleavage in the siliciclastic rocks of the cover. The mineralogical/textural data across the basement-cover boundary therefore indicate the removal of an entire metamorphic zone and thus a metamorphic hiatus.

These data suggest that the Taurides were affected by a Late Neoproterozoic event as part of the peri-Gondwana during the Cadomian orogeny.     

The deformation evaluation of Kızlaç T3A Tunnel (Osmaniye, Turkey)

This study covers the graphical analysis of deformation values measured in the Kızlaç T3A tunnel (Osmaniye, Turkey), which was built as a part of the Tarsus–Adana–Gaziantep Motorway Project. Excavation was performed through a sequence which was composed of sandstone–shale alternation, sandstone and dolerite dyke. Horizontal, longitudinal and settlement deformation values were optically read and recorded daily on a computer. These data were evaluated according to New Austrian Tunneling Method. Total deformation measurement, risky area determination and forecast of transitions between weak and stiff rock, stiff and weak rock were assessed as a result of deformation evaluation for tunnel stability, safety and economy.

The largest resultant deformation value (13 mm) was measured in the sandstone–shale alternation between chainage 500 and 550 m, which was highly weathered by groundwater and affected by local tectonic disturbance. The smallest deformation value was observed in a stiff dolerite dyke between 370 and 430 m, where at times the deformation values decreased to zero. In the sandstone, small resultant deformation values (2–4 mm) were also recorded. The 500–550-m interval of tunnel alignment had the highest risk for tunnel instability in the studied section but the deformation values (maximum 13 mm) were within the tolerable deformation range (10 cm). Small negative longitudinal deformation values decreasing between chainage 320 and 370 m and small positive longitudinal deformation values decreasing between 420 and 480 m indicate the sandstone–shale alternation (weak rock) and the dyke (stiff rock) and sandstone (stiff rock), and the sandstone–shale alternation with a fault gauge zone (weak rock), respectively. These longitudinal deformations needed probable to predict the lithological transitions ahead of the face, which in timely were used to determination of the tunnel support system.     

Insights into biaxial extensional tectonics: an examplefrom the Sandıklı Graben,West Anatolia,Turkey

West Anatolia, together with the Aegean Sea and the easternmost part of Europe, is one of the best examples of continental extensional tectonics. It is a complex area bounded by the Aegean–Cyprus Arc to the south and the North Anatolian Fault Zone (NAFZ) to the north. Within this complex and enigmatic framework, the Sandıklı Graben (10 km wide, 30 km long) has formed at the eastern continuation of the Western Anatolian extensional province at the north‐northwestward edge of the Isparta Angle. Recent studies have suggested that the horst–graben structures in West Anatolia formed in two distinct extensional phases. According to this model the first phase of extension commenced in the Early–Middle Miocene and the last, which is accepted as the onset of neotectonic regime, in Early Pliocene. However, it is controversial whether two‐phase extension was separated by a short period of erosion or compression during Late Miocene–Early Pliocene. Both field observations and kinematic analysis imply that the Sandıklı Graben has existed since the Late Pliocene, with biaxial extension on its margins which does not necessarily indicate rotation of regional stress distribution in time. Although the graben formed later in the neotectonic period, the commencement of extension in the area could be Early Pliocene (c. 5 Ma) following a severe but short time of erosion at the end of Late Miocene. The onset of the extensional regime might be due to the initiation of westward motion of Anatolian Platelet along the NAFZ that could be triggered by the higher rate of subduction at the east Aegean–Cyprus Arc in the south of the Aegean Sea. Copyright © 2003 John Wiley & Sons, Ltd.     

Site amplification at Avcılar, Istanbul

Avcılar is the suburb of Istanbul that was most heavily damaged during the August 17, 1999 M_w 7.4 Izmit earthquake. Strong ground motion caused fatalities and damage in Avcılar despite being 90 km from the epicenter. We deployed five portable seismograph stations equipped with Reftek 24-bit recorders and L4C-3D seismometers for 2 months, in order to understand why the local site response was different from elsewhere in Istanbul. A reference station was placed on a hard rock site, and the remaining four stations were placed on other geological units, in areas that had experienced varying levels of damage. We calculated frequency-dependent ground amplification curves by taking the ratios of the spectra at soft and hard rock sites. We obtained similar site response curves for most earthquakes at each site in the frequency range of 0.3–1.6 Hz, and observed no significant site amplification beyond 2.0 Hz at any site. The overall characteristics of the recorded S-waveforms and our modeling of the calculated site amplification curves are consistent with amplification as a result of trapping of seismic energy within a 100–150 m thick, low-velocity subsurface layer. We also review the applicability of microtremor measurements to estimate local site effects at Avcılar. For these data, we used ratios of spectra of horizontal to vertical components to obtain each site response. These results are compared with standard spectral ratios. These microtremor measurements provide consistent estimates of the amplification at most sites at the higher end of the frequency band, namely above 1 Hz. The results from both methods indeed agree well in this part of the frequency band. However, the microtremor method fails to detect amplification at lower frequencies, namely <1.0 Hz.     

Neotectonic structures in the area offshore of Alaçatı, Doğanbey and Kuşadası (western Turkey): evidence of strike-slip faulting in the Aegean extensional province

About 400 km of new seismic reflection data has been acquired in the study region offshore of Alaçatı, Doğanbey, and Kuşadası, which enables investigation of the active crustal deformation in this region. The deformation onshore in western Turkey is dominated by crustal extension, and clear evidence of this process is also now available from this offshore area. However, in the onshore area adjacent to this study region evidence of active right-lateral strike-slip faulting has also previously been observed. This strike-slip faulting has previously been thought only to accommodate variations in extension between adjacent normal faults. However, in the offshore area there is considerable evidence of zones of deformation, some of which may link to the strike-slip faulting onshore, suggesting that strike-slip faulting may be of greater importance in this region than previously thought.     

The genesis of the carbonatized and silicified ultramafics known as listvenites: a case study from the Mihalıççık region (Eskişehir), NW Turkey

The Mihalıççık region (Eskişehir) in NW Turkey includes an ophiolitic assemblage with a serpentinite‐matrix mélange. The serpentinites of this mélange host silica‐carbonate metasomatites which were previously named as listvenites. Our mineralogical and geochemical studies revealed that these alteration assemblages represent members of the listvenitic series, mainly the carbonate rocks, silica‐carbonate rocks and birbirites, rather than true listvenites (sensu stricto). Tectonic activity and lithology are principal factors that control the formation of these assemblages. Carbonatization and silicification of the serpentinite host‐rock is generated by CO₂, SiO₂‐rich H₂O hydrothermal fluid which includes As, Ba, Sb and Sr. Low precious metal (Au, Ag) contents of the alteration assemblages indicate lack of these metals in the fluid. Primary assemblages of the alteration are carbonate rocks that are followed by silica‐carbonate rocks and birbirites, respectively. Petrographic studies and chemical analyses suggested an alkaline and moderate to high temperature (350–400°C) fluid with low oxygen and sulphur fugacity for the carbonatization of the serpentinites. The low temperature phases observed in the subsequent silicification indicated that the fluid cooled during progressive alteration. The increasing Fe‐oxide content and sulphur phases also suggested increasing oxygen and sulphur fugacity during this secondary process and silica‐carbonate rock formation. The occurrence of birbirites is considered as a result of reactivation of tectonic features. These rocks are classified in two sub‐groups; the Group 1 birbirites show analogous rare earth element (REE) trends with the serpentinite host‐rock, and the Group 2 birbirites simulate the REE trends of the nearby tectonic granitoid slices. The unorthodox REE trend of Group 2 birbirites is interpreted to have resulted from a mobilization process triggered by the weathering solutions rather than being products of enrichment by the higher temperature hydrothermal activity. Copyright © 2006 John Wiley & Sons, Ltd.     

Late Miocene nonmarine sedimentation and formation of magnesites in the Acıgöl Basin, southwestern Anatolia, Turkey

The Late Miocene lacustrine Acıgöl Basin, SW Turkey, formed as an orogen-top, extensional half-graben, with the subaqueous accommodation controlled by the lake level and the bulk accommodation provided by active subsidence along a WSW-trending normal fault at the basin's southern margin. The basin-fill sedimentary succession consists of terminal alluvial-fan facies overlain by ephemeral lake-margin facies and perennial lake facies, with widespread fluvial facies at the top. The distal alluvial-fan facies include massive to stratified sandstones and massive mudstones with intervening nodular dolostones and incipient pedogenic horizons. The lake-margin facies are micritic magnesites passing laterally into peloidal, irregularly laminated magnesites towards the palaeolake margin and overlain by marlstones and dolostones, all with abundant evidence of episodic subaerial exposure (desiccation cracks, pedogenic features, and tepee structures). The perennial lake facies are micritic magnesites passing upwards into clayey dolostones and dolomitic or clayey marlstones. The fluvial facies capping the succession include planar cross-stratified conglomerates (channel-fill deposits), planar parallel-stratified, planar cross-stratified and rippled cross-laminated sandstones (crevasse-fill and crevasse splay deposits), and assemblages of mudstones intercalated with thin sandstone beds (overbank floodplain deposits).The sedimentological, mineralogical and geochemical data reveal large variations in the basin's hydrological regime, including short-term oscillations and bulk rise of the lake level, periodical changes in the Mg/Ca ratio and terrigenous mud supply, and a negative covariance of δ¹⁸O and δ¹³C fluctuations. The composition of terrigenous sediment and the chemistry of water supplied to the lake were controlled by the weathering, chemical leaching and erosion of the ultramafic–dolomitic bedrock in the catchment area. The bedrock yielded Mg-rich carbonate solutions that caused the deposition of Mg-carbonates in the lake.Despite short-term lake-level fluctuations, the lake's net water budget remained positive. It is suggested that the region's present-day climate and Mg-rich alkaline lakes can serve as an analogue for the climatic and hydrological conditions in the Late Miocene Acıgöl Basin.     

Dating Quaternary volcanism and incision by the River Tigris at Diyarbakır,southeast Turkey

New high‐precision Ar‐Ar dating of basalt underlying the city of Diyarbak?r, southeast Turkey, constrains the Quaternary incision history of the River Tigris, strengthening the pre‐existing chronology based on magnetostratigraphy and K‐Ar dates. The basalt, which overlies Tigris terrace gravel 70 m above the river, is part of the Karacada? shield volcano complex centred ca. 60 km to the southwest. The reverse‐magnetised Diyarbak?r basalt, one of relatively few flow units to reach the Tigris valley axis, has been dated to 1196 ± 19 ka (±2σ). Two lower terraces have been recognised in the Diyarbak?r area, 46 and 32 m above the present river, with at least one other further downstream. From this evidence the rate of Middle‐Late Pleistocene incision by the Tigris can be estimated; it probably reached ca. 0.07 mm a^?1, reflecting the characteristic global increase in uplift rates observed at that time. Copyright © 2007 John Wiley & Sons, Ltd.     

Structural investigations of (Ca,Sr)ZrO<Subscript>3</Subscript> and Ca(Sn,Zr)O<Subscript>3</Subscript> perovskite compounds

(Ca _x ,Sr_1?x )ZrO₃ and Ca(Sn _y ,Zr_1-y )O₃ solid solutions were synthesized by solid-state reaction at high temperature before to be studied by powder X-ray diffraction and Raman Spectroscopy. Diffraction data allow the distortion of the ABO₃ perovskite structure to be investigated according to cations substitution on A and B-sites. It is shown that distortion, characterized by Φ, the tilt angle of BO₆ octahedra, slightly increases with decreasing y content in Ca(Sn _y ,Zr_1?y )O₃ compounds and strongly decreases with decreasing x content in (Ca _x ,Sr_1?x )ZrO₃ compounds. Such results are discussed in view of the relative A and B cation sizes. Raman data show that vibrational spectra are strongly affected by the cation substitution on A-site; the frequencies of most vibrational modes increase with increasing x content in (Ca _x ,Sr_1?x )ZrO₃ compounds, i.e. with the decreasing mean size of the A-cation; the upper shift is observed for the 358 cm^?1 mode (?ν/?r = ?60.1 cm^?1/Å). On the other hand, the cation substitution on B-sites, slightly affect the spectra; it is shown that in most cases, the frequency of vibrational modes increases with increasing y content in Ca(Sn _y ,Zr_1?y )O₃ compounds, i.e. with the decreasing mean size of the B-cation, but that two modes (287 and 358 cm^?1) behave differently: their frequencies decrease with the decreasing mean size of the B-cation, with a shift respectively equal to +314 and +162 cm^?1/Å. Such results could be used to predict the location of different elements such as trivalent cations or radwaste elements on A- or B-site, in the perovskite structure.     

Metamorphic evolution of blueschists of the Altınekin Complex,Konya area,south central Turkey

The Altınekin Complex in south central Turkey forms part of the south‐easterly extension of the Tavşanlı Zone, a Cretaceous subduction complex formed during the closure of the Neo‐Tethys ocean. The protoliths of metamorphic rocks within the Altınekin Complex include peridotites, chromitites, basalts, ferruginous cherts and flysch‐facies impure carbonate sediments. Structurally, the complex consists of a stack of thrust slices, with massive ophiolite tectonically overlying a Cretaceous sediment‐hosted ophiolitic mélange, in turn overlying a sequence of Mesozoic sediments. Rocks within the two lower structural units have undergone blueschist–facies metamorphism. Petrographic, mineral–chemical and thermobarometric studies were undertaken on selected samples of metasedimentary and metabasic rock in order to establish the time relations of deformation and metamorphism and to constrain metamorphic conditions. Microstructures record two phases of plastic deformation, one predating the metamorphic peak, and one postdating it. Estimated peak metamorphic pressures mostly fall in the range 9–11 kbar, corresponding to burial depths of 31–38 km, equivalent to the base of a continental crust of normal thickness. Best‐fit peak metamorphic temperatures range from 375 to 450°C. Metamorphic fluids had high H₂O:CO₂ ratios. Peak metamorphic temperature/depth ratios (T/d values) were low (c. 10–14°C/km), consistent with metamorphism in a subduction zone. Lawsonite‐bearing rocks in the southern part of the ophiolitic mélange record lower peak temperatures and T/d values than epidote blueschists elsewhere in the unit, hinting that the latter may consist of two or more thrust slices with different metamorphic histories. Differences in peak metamorphic conditions also exist between the ophiolitic mélange and the underlying metasediments. Rocks of the Altınekin Complex were subducted to much shallower depths, and experienced higher geothermal gradients, than those of the NW Tavşanlı Zone, possibly indicating dramatic lateral variation in subduction style. Retrograde P–T paths in the Altınekin Complex were strongly decompressive, resulting in localized overprinting of epidote blueschists by greenschist–facies assemblages, and of lawsonite blueschists by pumpellyite–facies assemblages. The observation that the second deformation was associated with decompression is consistent with, but not proof of, exhumation by a process that involved deformation of the hanging‐wall wedge, such as gravitational spreading, corner flow or buoyancy‐driven shallowing of the subduction zone. Copyright © 2005 John Wiley & Sons, Ltd.     

The Misis–Andırın Complex: a Mid-Tertiary melange related to late-stage subduction of the Southern Neotethys in S Turkey

The Mid-Tertiary (Mid-Eocene to earliest Miocene) Misis–Andırın Complex documents tectonic-sedimentary processes affecting the northerly, active margin of the South Tethys (Neotethys) in the easternmost Mediterranean region. Each of three orogenic segments, Misis (in the SW), Andırın (central) and Engizek (in the NE) represent parts of an originally continuous active continental margin. A structurally lower Volcanic-Sedimentary Unit includes Late Cretaceous arc-related extrusives and their Lower Tertiary pelagic cover. This unit is interpreted as an Early Tertiary remnant of the Mesozoic South Tethys. The overlying melange unit is dominated by tectonically brecciated blocks (>100 m across) of Mesozoic neritic limestone that were derived from the Tauride carbonate platform to the north, together with accreted ophiolitic material. The melange matrix comprises polymict debris flows, high- to low-density turbidites and minor hemipelagic sediments.The Misis–Andırın Complex is interpreted as an accretionary prism related to the latest stages of northward subduction of the South Tethys and diachronous continental collision of the Tauride (Eurasian) and Arabian (African) plates during Mid-Eocene to earliest Miocene time. Slivers of Upper Cretaceous oceanic crust and its Early Tertiary pelagic cover were accreted, while blocks of Mesozoic platform carbonates slid from the overriding plate. Tectonic mixing and sedimentary recycling took place within a trench. Subduction culminated in large-scale collapse of the overriding (northern) margin and foundering of vast blocks of neritic carbonate into the trench. A possible cause was rapid roll back of dense downgoing Mesozoic oceanic crust, such that the accretionary wedge taper was extended leading to gravity collapse. Melange formation was terminated by underthrusting of the Arabian plate from the south during earliest Miocene time.Collision was diachronous. In the east (Engizek Range and SE Anatolia) collision generated a Lower Miocene flexural basin infilled with turbidites and a flexural bulge to the south. Miocene turbiditic sediments also covered the former accretionary prism. Further west (Misis Range) the easternmost Mediterranean remained in a pre-collisional setting with northward underthrusting (incipient subduction) along the Cyprus arc. The Lower Miocene basins to the north (Misis and Adana) indicate an extensional (to transtensional) setting. The NE–SW linking segment (Andırın) probably originated as a Mesozoic palaeogeographic offset of the Tauride margin. This was reactivated by strike-slip (and transtension) during Later Tertiary diachronous collision. Related to on-going plate convergence the former accretionary wedge (upper plate) was thrust over the Lower Miocene turbiditic basins in Mid–Late Miocene time. The Plio-Quaternary was dominated by left-lateral strike-slip along the East Anatolian transform fault and also along fault strands cutting the Misis–Andırın Complex.     

K‐Ar age determination,whole‐rock and oxygen isotope geochemistry of the post‐collisional Bizmişen and Çaltı plutons,SW Erzincan,eastern Central Anatolia,Turkey

Post‐collisional granitoid plutons intrude obducted Neo‐Tethyan ophiolitic rocks in central and eastern Central Anatolia. The Bizmişen and Çaltı plutons and the ophiolitic rocks that they intrude are overlain by fossiliferous and flyschoidal sedimentary rocks of the early Miocene Kemah Formation. These sedimentary rocks were deposited in basins that developed at the same time as tectonic unroofing of the plutons along E–W and NW–SE trending faults in Oligo‐Miocene time. Mineral separates from the Bizmişen and Çaltı plutons yield K‐Ar ages ranging from 42 to 46 Ma, and from 40 to 49 Ma, respectively. Major, trace, and rare‐earth element geochemistry as well as mineralogical and textural evidence reveals that the Bizmişen pluton crystallized first, followed at shallower depth by the Çaltı pluton from a medium‐K calcalkaline, I‐type hybrid magma which was generated by magma mixing of coeval mafic and felsic magmas. Delta ¹⁸O values of both plutons fall in the field of I‐type granitoids, although those of the Çaltı pluton are consistently higher than those of the Bizmişen pluton. This is in agreement with field observations, petrographic and whole‐rock geochemical data, which indicate that the Bizmişen pluton represents relatively uncontaminated mantle material, whereas the Çaltı pluton has a significant crustal component. Structural data indicating the middle Eocene emplacement age and intrusion into already obducted ophiolitic rocks, suggest a post‐collisional extensional origin. However, the pure geochemical discrimination diagrams indicate an arc origin which can be inherited either from the source material or from an upper mantle material modified by an early subduction process during the evolution of the Neo‐Tethyan ocean. Copyright © 2005 John Wiley & Sons, Ltd.     

Geochemical and mantle-like isotopic (Nd, Sr) composition of the Baklan Granite from the Muratdağı Region (Banaz, Uşak), western Turkey: Implications for input of juvenile magmas in the source domains of western Anatolia Eocene–Miocene granites

The (late syn)- post-collisional magmatic activities of western and northwestern Anatolia are characterized by intrusion of a great number of granitoids. Amongst them, Baklan Granite, located in the southern part of the Muratdağı Region from the Menderes Massif (Banaz, Uşak), has peculiar chemical and isotopic characteristics. The Baklan rocks are made up by K-feldspar, plagioclase, quartz, biotite and hornblende, with accessory apatite, titanite and magnetite, and include mafic microgranular enclaves (MME). Chemically, the Baklan intrusion is of sub-alkaline character, belongs to the high-K, calc-alkaline series and displays features of I-type affinity. It is typically metaluminous to mildly peraluminous, and classified predominantly as granodiorite in composition. The spider and REE patterns show that the rocks are fractionated and have small negative Eu anomalies (Eu/Eu^* = 0.62–0.86), with the depletion of Nb, Ti, P and, to a lesser extent, Ba and Sr. The pluton was dated by the K–Ar method on the whole-rock, yielded ages between 17.8 ± 0.7 and 19.4 ± 0.9 Ma (Early Miocene). The intrusion possesses primitive low initial ⁸⁷Sr/⁸⁶Sr ratios (0.70331–0.70452) and negative ε_Nd(t) values (−5.0 to −5.6). The chemical contrast between evolved Baklan rocks (SiO₂, 62–71 wt.%; Cr, 7–27 ppm; Ni, 5–11 ppm; Mg#, 45–51) and more primitive clinopyroxene-bearing monzonitic enclaves (SiO₂, 54–59 wt.%; Cr, 20–310 ppm; Ni, 10–70 ppm; Mg#, 50–61) signifies that there is no co-genetic link between host granite and enclaves. The chemical and isotopic characteristics of the Baklan intrusion argue for an important role of a juvenile component, such as underplated mantle-derived basalt, in the generation of the granitoids. Crustal contamination has not contributed significantly to their origin. However, with respect to those of the Baklan intrusion, the generation of the (late syn)- post-collisional intrusions with higher Nd(t) values from the western Anatolia require a much higher amount of juvenil component in their source domains.     

Analyse de 47 Echantillons Géochimiques de Référence par Fluorescence-X (Cu, Ga, Ni, Zn) Et par Absorption Atomique (Cu, Ni, Zn)

47 étalons géochimiques internationaux dont les huit nouveaux étalons de l'USGS ont été analysés par fluorescence-X et absorption atomique pour Ni, Cu, Zn et par fluorescence-X pour Ga.
Les auteurs développment ici pour la fluores-cence-X les problèmes concernant le choix des fonds, le calcul du fond véritable sous-jacent au pic mesuré, les impuretés des tubes et de l'appareillage. Une méthode directe sur échantillon pulvérulent, non destructive, sans aucune préparation est utilisée.
Trois systèmes de fluorescence-X utilisant deux appareillages (Philips PW 1540 et Siemens SSRS 1) et deux tubes molybdène et or sont confrontés et les moyennes comparée à celles d'une méthode d'absorption atomique par mise en solution de l'échantillon (IL 353).
Les résultats obtenus sont comparés soit aux valeurs recommandées, soit aux moyennes calculées à partir de la littérature. On discute tant les accords que les divergences.     

Uranium and Thorium Concentration and Isotopic Composition in Five Glass (BHVO‐2G,BCR‐2G,NKT‐1G,T1‐G,ATHO‐G) and Two Powder (BHVO‐2, BCR‐2) Reference Materials

Here we report uranium and thorium isotopic ratios and elemental concentrations measured in solid reference materials from the USGS (BHVO‐2G, BCR‐2G, NKT‐1G), as well as those from the MPI‐DING series (T1‐G, ATHO‐G). Specifically created for microanalysis, these naturally‐sourced glasses were fused from rock powders. They cover a range of compositions, elemental concentrations and expected isotopic ratios. The U‐Th isotopic ratios of two powdered source materials (BCR‐2, BHVO‐2) were also characterised. These new measurements via multi‐collector thermal ionisation mass spectrometry and multi‐collector inductively coupled plasma‐mass spectrometry can now be used to assess the relative performance of techniques and facilitate comparison of U‐Th data amongst laboratories in the geoscience community for in situ and bulk analyses.