On the mechanism of the generation of seismic “nails”

The spatial and temporal peculiarities of seismic “nails” are analyzed. Some nails are related to strong earthquakes, or volcanic eruptions, while some do not show any coincidence with any fault zone or other tectonic structures. In some cases, poorly expressed trends in the depths of earthquake occurrence sequences occur. Based on the calculation of the Hurst exponent, a stable tendency in the order sequence for the depths of hypocenters that form a nail has been revealed. This tendency is consistent with self-organization models, which demonstrate positive feedback during interactions between fluid flows and tectonic deformations and have been used to explain the earthquake generation mechanism. The peculiarities of changes in earthquake numbers on the day when a nail is formed agree well with the acoustical emission dynamics during earthquake triggering through water injections, based on the long-term experimental data. The most probable mechanism that generates the seismic nails that are not related to strong earthquakes is seismic activation under the effects of fluids.     

Assessment of the statistical earthquake hazard parameters for NW Turkey

We performed a probabilistic analysis of earthquake hazard input parameters, NW Turkey covers Gelibolu and Biga Peninsulas, and its vicinity based on four seismic sub-zones. The number of earthquakes with magnitude M ≥ 3.0 occurred in this region for the period between 1912 and 2007 is around 5130. Four seismic source sub-zones were defined with respect to seismotectonic framework, seismicity and fault geometry. The hazard perceptibility characterization was examined for each seismic source zone and for the whole region. The probabilities of earthquake recurrences were obtained by using Poisson statistical distribution models. In order to determine the source zones where strong and destructive earthquakes may occur, distribution maps for a, b and a/b values were calculated. The hazard scaling parameters (generally known as a and b values) in the computed magnitude–frequency relations vary in the intervals 4.28–6.58 and 0.59–1.13, respectively, with a RMS error percentage below 10 %. The lowest b value is computed for sub-zone three indicating the predominance of large earthquakes mostly at Gelibolu (Gallipoli) and north of Biga Peninsula (southern Marmara region), and the highest b value is computed for sub-zone two Edremit Bay (SW Marmara region). According to the analysis of each seismic sub-zone, the greatest risk of earthquake occurrence is determined for the triangle of Gelibolu–Tekirda? western part of Marmara Sea. Earthquake occurrence of the largest magnitude with 7.3 within a 100-year period was determined to be 46 % according to the Poisson distribution, and the estimated recurrence period of years for this region is 50 ± 12. The seismic hazard is pronounced high in the region extending in a NW–SE direction, north of Edremit Bay, west of Saros Bay and Yenice Gönen (southern Marmara region) in the south. High b values are generally calculated at depths of 5–20 km that can be expressed as low seismic energy release and evaluated as the seismogenic zone.     

Source parameters of earthquakes in the reservoir-triggered seismic (RTS) zone of Koyna–Warna, Western India

New empirical relations are derived for source parameters of the Koyna–Warna reservoir-triggered seismic zone in Western India using spectral analysis of 38 local earthquakes in the magnitude range M _L 3.5–5.2. The data come from a seismic network operated by the CSIR-National Geophysical Research Institute, India, during March 2005 to April 2012 in this region. The source parameters viz. seismic moment, source radius, corner frequency and stress drop for the various events lie in the range of 10¹³–10¹⁶ Nm, 0.1–0.4 km, 2.9–9.4 Hz and 3–26 MPa, respectively. Linear relationships are obtained among the seismic moment (M ₀), local magnitude (M _L), moment magnitude (M _w), corner frequency (fc) and stress drop (?σ). The stress drops in the Koyna–Warna region are found to increase with magnitude as well as focal depths of earthquakes. Interestingly, accurate depths derived from moment tensor inversion of earthquake waveforms show a strong correlation with the stress drops, seemingly characteristic of the Koyna–Warna region.     

Andean earthquakes triggered by the 2010 Maule,Chile (Mw 8.8) earthquake: Comparisons of geodetic,seismic and geologic constraints

The Maule, Chile, (M_w 8.8) earthquake on 27 February 2010 triggered deformation events over a broad area, allowing investigation of stress redistribution within the upper crust following a mega-thrust subduction event. We explore the role that the Maule earthquake may have played in triggering shallow earthquakes in northwestern Argentina and Chile. We investigate observed ground deformation associated with the M_w 6.2 (GCMT) Salta (1450 km from the Maule hypocenter, 9 h after the Maule earthquake), M_w 5.8 Catamarca (1400 km; nine days), M_w 5.1 Mendoza (350 km; between one to five days) earthquakes, as well as eight additional earthquakes without an observed geodetic signal. We use seismic and Interferometric Synthetic Aperture Radar (InSAR) observations to characterize earthquake location, magnitude and focal mechanism, and characterize how the non-stationary, spatially correlated noise present in the geodetic imagery affects the accuracy of our parameter estimates. The focal mechanisms for the far-field Salta and Catamarca earthquakes are broadly consistent with regional late Cenozoic fault kinematics. We infer that dynamic stresses due to the passage of seismic waves associated with the Maule earthquake likely brought the Salta and Catamarca regions closer to failure but that the involved faults may have already been at a relatively advanced stage of their seismic cycle. The near-field Mendoza earthquake geometry is consistent with triggering related to positive static Coulomb stress changes due to the Maule earthquake but is also aligned with the South America-Nazca shortening direction. None of the earthquakes considered in this study require that the Maule earthquake reactivated faults in a sense that is inconsistent with their long-term behavior.     

Variation of singularity of earthquake-size distribution with respect to tectonic regime

Frequency-size relation of earthquakes in a region can be approximated by the Gutenberg-Richter law(GR). This power-law model involves two parameters: a-value measuring seismic activity or earthquake productivity, and b-value describing the relation between frequencies of small and large earthquakes.The spatial and temporal variations of these two parameters, especially the b-value, have been substantially investigated. For example, it has been shown that b-value depends inversely on differential stress. The b-value has also been utilized as earthquake precursor in large earthquake prediction.However, the physical meaning and properties of b-value including its value range still remain as an open fundamental question. We explore the property of b-value from frequency-size GR model in a new form which relates average energy release and probability of large earthquakes. Based on this new form of GR relation the b-value can be related to the singularity index(1-2/3 b) of fractal energy-probability power-law model. This model as applied to the global database of earthquakes with size M ≥ 5 from 1964 to 2015 indicates a systematic increase of singularity from earthquakes occurring on mid-ocean ridges, to those in subduction zones and in collision zones.     

Analyses of Seismic Deformation at the Kibyra Roman Stadium,Southwest Turkey

The ancient city of Kibyra in southwest Turkey has the potential to reveal the location and date of historical earthquakes. The most compelling evidence for earthquake faulting is observed in the city's Roman stadium. Damage related to seismic shaking is characterized by systematically collapsed columns, dilated and collapsed walls, and by rotated and displaced blocks in the stadium. Detailed archaeoseismological observations suggest that Kibyra was affected by earthquakes that were also recorded in historical earthquake catalogs. Although there is no historical record of a large earthquake after the 5th century A.D., Optically stimulated luminescence (OSL) dating of deposits under the collapsed blocks suggests a later seismic event. OSL results indicate that another large event occurred in southwest Turkey, probably around the 10–11th century A.D., and caused extensive damage (I_o = VIII‐IX) to the Kibyra stadium.     

Do faults preserve a record of seismic slip: A second opinion

Exhumed fault zones offer insights into deformation processes associated with earthquakes in unparalleled spatial resolution; however it can be difficult to differentiate seismic slip from slow or aseismic slip based on evidence in the rock record. Fifteen years ago, Cowan (1999) defined the attributes of earthquake slip that might be preserved in the rock record, and he identified pseudotachylyte as the only reliable indicator of past earthquakes found in ancient faults. This assertion was based on models of frictional heat production (Sibson, 1975, 1986) providing evidence for fast slip. Significant progress in fault rock studies has revealed a range of reaction products which can be used to detect frictional heating at peak temperatures less than the melt temperature of the rock. In addition, features formed under extreme transient stress conditions associated with the propagating tip of an earthquake rupture can now be recognized in the rock record, and are also uniquely seismic. Thus, pseudotachylyte is no longer the only indicator of fossilized earthquake ruptures.We review the criteria for seismic slip defined by Cowan (1999), and we determine that they are too narrow. Fault slip at rates in the range 10⁻⁴−10¹ m/s is almost certainly dynamic. This implies that features reproduced in experiments at rates as low as 10⁻⁴ m/s may be indicators of seismic slip. We conclude with a summary of the rock record of seismic slip, and lay out the current challenges in the field of earthquake geology.     

Seismicity of Gujarat

Paper describes tectonics, earthquake monitoring, past and present seismicity, catalogue of earthquakes and estimated return periods of large earthquakes in Gujarat state, western India. The Gujarat region has three failed Mesozoic rifts of Kachchh, Cambay, and Narmada, with several active faults. Kachchh district of Gujarat is the only region outside Himalaya-Andaman belt that has high seismic hazard of magnitude 8 corresponding to zone V in the seismic zoning map of India. The other parts of Gujarat have seismic hazard of magnitude 6 or less. Kachchh region is considered seismically one of the most active intraplate regions of the World. It is known to have low seismicity but high hazard in view of occurrence of fewer smaller earthquakes of M????6 in a region having three devastating earthquakes that occurred during 1819 (M _w7.8), 1956 (M _w6.0) and 2001 (M _w7.7). The second in order of seismic status is Narmada rift zone that experienced a severely damaging 1970 Bharuch earthquake of M5.4 at its western end and M????6 earthquakes further east in 1927 (Son earthquake), 1938 (Satpura earthquake) and 1997 (Jabalpur earthquake). The Saurashtra Peninsula south of Kachchh has experienced seismicity of magnitude less than 6.     

Multi-scale imaging of a slow active fault zone: contribution for improved seismic hazard assessment in the Swiss Alpine foreland

Seismic hazard assessment of slow active fault zones is challenging as usually only a few decades of sparse instrumental seismic monitoring is available to characterize seismic activity. Tectonic features linked to the observed seismicity can be mapped by seismic imaging techniques and/or geomorphological and structural evidences. In this study, we investigate a seismic lineament located in the Swiss Alpine foreland, which was discussed in previous work as being related to crustal structures carrying in size the potential of a magnitude M 6 earthquake. New, low-magnitude (?2.0 ≤ M_L ≤ 2.5) earthquake data are used to image the spatial and temporal distribution of seismogenic features in the target area. Quantitative and qualitative analyses are applied to the waveform dataset to better constrain earthquakes distribution and source processes. Potential tectonic features responsible for the observed seismicity are modelled based on new reinterpretations of oil industry seismic profiles and recent field data in the study area. The earthquake and tectonic datasets are then integrated in a 3D model. Spatially, the seismicity correlates over 10–15 km with a N–S oriented sub-vertical fault zone imaged in seismic profiles in the Mesozoic cover units above a major decollement on top of the mechanically more rigid basement and seen in outcrops of Tertiary series east of the city of Fribourg. Observed earthquakes cluster at shallow depth (<4 km) in the sedimentary cover. Given the spatial extend of the observed seismicity, we infer the potential of a moderate size earthquake to be generated on the lineament. However, since the existence of along strike structures in the basement cannot be excluded, a maximum M 6 earthquake cannot be ruled out. Thus, the Fribourg Lineament constitutes a non-negligible source of seismic hazard in the Swiss Alpine foreland.     

Seismic hazard monitoring in Kamchatka and its applications to the M = 6.6 earthquake of 6 October 1987

The earthquake of 6 October 1987 (M = 6.6), which occurred near the Shipunsky Cape, Kamchatka, was the largest crustal event in the vicinity of the main city of Kamchatka — Petropavlovsk-Kamchatsky — during the last three decades. It was followed by numerous aftershocks. This earthquake allowed us to test the effectiveness of the seismic hazard monitoring in Kamchatka, including the seismological, geodetic and hydrogeochemical surveys. The seismic survey provided the location and source nature of the main shock and aftershocks and the seismic environment of the main shock. The geodetic and hydrogeochemical surveys have yielded data on the response to earthquakes of the Earth's surface deformations, water level, and chemical elements concentration in the underground water. As a result, the following data were obtained:

u

The earthquake of 6 October had a seismic moment 4–10 E18 Nm, thrust type of faulting and the source volume of 20 × 20 × 10 km³. The maximum intensity was VI–VII (MSK-64 scale) and maximum acceleration 88 cm/s².

Before this event, a relative increase in the number of the upper mantle (depth more than 100 km) moderate magnitude earthquakes during 5 years and a one-year period of seismic quiescence for small shallow earthquakes, were recognized. Significant anomalies in HCO₃ and H₃BO₃ concentrations in the underground waters were observed in the wells a week before the main shock.

     

A comparative study of the main factors controlling geohazards induced by 10 strong earthquakes in Western China since the Wenchuan earthquake in 2008

Determining the main controlling factors of earthquake-triggered geohazards is a prerequisite for studying earthquake geohazards and post-disaster emergency response. By studying these factors, the geomorphic and geological factors controlling the nature, condition, and distribution of earthquake-induced geohazards can be analyzed. Such insights facilitate earthquake disaster prediction and emergency response planning.The authors combined field investigations and spatial data analysis to examine...     

Surface deformation related to the 2008 Wenchuan earthquake,and mountain building of the Longmen Shan,eastern Tibetan Plateau

The 12 May 2008 M_s 8.0 Wenchuan earthquake, China, was one of largest continental thrusting events worldwide. Based on interpretations of post-earthquake high-resolution remote sensing images and field surveys, we investigated the geometry, geomorphology, and kinematics of co-seismic surface ruptures, as well as seismic and geologic hazards along the Longmen Shan fold-and-thrust belt. Our results indicate that the Wenchuan earthquake occurred along the NE–SW-trending Yingxiu–Beichuan and Guanxian–Anxian faults in the Longmen Shan fold-and-thrust belt. The main surface rupture zones along the Yingxiu–Beichuan and Guanxian–Anxian fault zones are approximately 235 and 72 km in length, respectively. These sub-parallel ruptures may merge at depth. The Yingxiu–Donghekou surface rupture zone can be divided into four segments separated by discontinuities that appear as step-overs or bends in map view. Surface deformation is characterized by oblique reverse faulting with a maximum vertical displacement of approximately 10 m in areas around Beichuan County. Earthquake-related disasters (e.g., landslides) are linearly distributed along the surface rupture zones and associated river valleys.The Wenchuan earthquake provides new insights into the nature of mountain building within the Longmen Shan, eastern Tibetan Plateau. The total crustal shortening accommodated by this great earthquake was as much as 8.5 m, with a maximum vertical uplift of approximately 10 m. The present results suggest that ongoing mountain building of the Longmen Shan is driven mainly by crustal shortening and uplift related to repeated large seismic events such as the 2008 Wenchuan earthquake. Furthermore, rapid erosion within the Longmen Shan fold-and-thrust belt occurs along deep valleys and rupture zones following the occurrence of large-scale landslides triggered by earthquakes. Consequently, we suggest that crustal shortening related to repeated great seismic events, together with isostatic rebound induced by rapid erosion-related unloading, is a key component of the geodynamics that drive ongoing mountain building on the eastern Tibetan Plateau.     

Low b-value prior to the Indo-Myanmar subduction zone earthquakes and precursory swarm before the May 1995 M 6.3 earthquake

Some 455 events (m_b ⩾ 4.5) in the Indo-Myanmar subduction zone are compiled using the ISC/EHB/NEIC catalogues (1964–2011) for a systematic study of seismic precursors, b-value and swarm activity. Temporal variation of b-value is studied using the maximum likelihood method beside CUSUM algorithm. The b-values vary from 0.95 to 1.4 for the deeper (depth ⩾60 km) earthquakes, and from 0.85 to 1.3 for the shallower (depth <60 km) earthquakes. A sudden drop in the b-value, from 1.4 to 0.9, prior to the occurrence of larger earthquake(s) at the deeper depth is observed. It is also noted that the CUSUM gradient reversed before the occurrence of larger earthquakes. We further examined the seismicity pattern for the period 1988–1995 within a radius of 150 km around the epicentre (latitude: 24.96°N; longitude: 95.30°E) of a deeper event M 6.3 of May 6, 1995 in this subduction zone. A precursory swarm during January 1989 to July 1992 and quiescence during August 1992 to April 1995 are identified before this large earthquake. These observations are encouraging to monitor seismic precursors for the deeper events in this subduction zone.     

Tectonic structures across the East African Rift based on the source parameters of the 20 May 1990 M7.2 Sudan earthquake

Earthquakes in Kenya are common along the Kenya Rift Valley because of the slow divergent movement of the rift and hydrothermal processes in the geothermal fields. This implies slow but continuous radiation of seismic energy, which relieves stress in the subsurface rocks. On the contrary, the NW-SE trending rift/fault zones such as the Aswa-Nyangia fault zone and the Muglad-Anza-Lamu rift zone are the likely sites of major earthquakes in Kenya and the East African region. These rift/fault zones have been the sites of a number of strong earthquakes in the past such as the M _w = 7.2 southern Sudan earthquake of 20 May 1990 and aftershocks of M _w = 6.5 and 7.1 on 24 May 1990, the 1937 M _s = 6.1 earthquake north of Lake Turkana close to the Kenya-Ethiopian border, and the 1913 M _s = 6.0 Turkana earthquake, among others. Source parameters of the 20 May 1990 southern Sudan earthquake show that this earthquake consists of only one event on a fault having strike, dip, and rake of 315°, 84°, and ?3°. The fault plane is characterized by a left-lateral strike slip fault mechanism. The focal depth for this earthquake is 12.1 km, seismic moment M _o = 7.65 × 10¹⁹ Nm, and moment magnitude, M _w = 7.19 (?7.2). The fault rupture started 15 s earlier and lasted for 17 s along a fault plane having dimensions of ?60 km × 40 km. The average fault dislocation is 1.1 m, and the stress drop, ?σ, is 1.63 MPa. The distribution of historical earthquakes (M _w ≥ 5) from southern Sudan through central Kenya generally shows a NW-SE alignment of epicenters. On a local scale in Kenya, the NW–SE alignment of epicenters is characterized by earthquakes of local magnitude M _l ≤ 4.0, except the 1928 Subukia earthquake (M _s = 6.9) in central Kenya. This NW–SE alignment of epicenters is consistent with the trend of the Aswa-Nyangia Fault Zone, from southern Sudan through central Kenya and further southwards into the Indian Ocean. We therefore conclude that the NW–SE trending rift/fault zones are sites of strong earthquakes likely to pose the greatest earthquake hazard in Kenya and the East African region in general.     

Tectonic setting and geological manifestations of the 2003 Altai earthquake

Geological and geomorphic manifestations of the source of the earthquake that occurred in the southern Gorny Altai on September 27, 2003, are described. This earthquake, the strongest over the entire history of seismological observations, caused damage to buildings and structures in the Chuya and Kurai basins and was accompanied by exposure of its source at the surface with formation of a system of seismic ruptures trending in the northwestern direction. The linear zone of seismic rupture was traced for more than 70 km on the northern slopes of the North Chuya and South Chuya ranges, and a developed network of related splays was found. The secondary (gravitational and vibrational) seismic dislocations were expressed as downfalls, landslides, and gryphons in the pleistoseist zone. These dislocations occur over an area of approximately 90 × 25 km² that broadly coincides with the region of quakes having intensities of IX–VII. The paleoseismogeological investigations performed in the source region of the 2003 earthquake have shown that seven seismic events with M = 7.0–8.0 occurred in its source over the last 5000 years with a 500-to 900-year recurrence period. The study of the tectonic setting of the earthquake source in the Gorny Altai has allowed northward tracing of the main seismically active zones of the Mongolian and Gobi Altai, where earthquakes with a magnitude M > 7.0 occurred repeatedly, in particular, during the 20th century, and combination of all mountain systems of the Greater Altai into a common high-magnitude seismotectonic province.     

Site response of the Ganges basin inferred from re-evaluated macroseismic observations from the 1897 Shillong, 1905 Kangra,and 1934 Nepal earthquakes

We analyze previously published geodetic data and intensity values for the M _s = 8.1 Shillong (1897), M _s = 7.8 Kangra (1905), and M _s = 8.2 Nepal/Bihar (1934) earthquakes to investigate the rupture zones of these earthquakes as well as the amplification of ground motions throughout the Punjab, Ganges and Brahmaputra valleys. For each earthquake we subtract the observed MSK intensities from a synthetic intensity derived from an inferred planar rupture model of the earthquake, combined with an attenuation function derived from instrumentally recorded earthquakes. The resulting residuals are contoured to identify regions of anomalous intensity caused primarily by local site effects. Observations indicative of liquefaction are treated separately from other indications of shaking severity lest they inflate inferred residual shaking estimates. Despite this precaution we find that intensites are 1–3 units higher near the major rivers, as well as at the edges of the Ganges basin. We find evidence for a post-critical Moho reflection from the 1897 and 1905 earthquakes that raises intensities 1–2 units at distances of the order of 150 km from the rupture zone, and we find that the 1905 earthquake triggered a substantial subsequent earthquake at Dehra Dun, at a distance of approximately 150 km. Four or more M = 8 earthquakes are apparently overdue in the region based on seismic moment summation in the past 500 years. Results from the current study permit anticipated intensities in these future earthquakes to be refined to incorporate site effects derived from dense macroseismic data.     

Probabilities of earthquake occurrences in Mainland Southeast Asia

The frequency–magnitude distributions of earthquakes are used in this study to estimate the earthquake hazard parameters for individual earthquake source zones within the Mainland Southeast Asia. For this purpose, 13 earthquake source zones are newly defined based on the most recent geological, tectonic, and seismicity data. A homogeneous and complete seismicity database covering the period from 1964 to 2010 is prepared for this region and then used for the estimation of the constants, a and b, of the frequency–magnitude distributions. These constants are then applied to evaluate the most probable largest magnitude, the mean return period, and the probability of earthquake of different magnitudes in different time spans. The results clearly show that zones A, B, and E have the high probability for the earthquake occurrence comparing with the other seismic zones. All seismic source zones have 100 % probability that the earthquake with magnitude ≤6.0 generates in the next 25 years. For the Sagaing Fault Zone (zones C), the next Mw 7.2–7.5 earthquake may generate in this zone within the next two decades and should be aware of the prospective Mw 8.0 earthquake. Meanwhile, in Sumatra-Andaman Interplate (zone A), an earthquake with a magnitude of Mw 9.0 can possibly occur in every 50 years. Since an earthquake of magnitude Mw 9.0 was recorded in this region in 2004, there is a possibility of another Mw 9.0 earthquake within the next 50 years.     

Known and unknown earthquakes through some European periodicals of the eighteenth century

Since the eighteenth century, pioneer seismologists have used information from the periodical press to compile their lists of European earthquakes. A systematic reading of three eighteenth century periodicals –Gaceta de Madrid (1701–1750), Gazeta de Lisboa (1715–1751) and Mercure de France (1732–1763) – has been carried out in the frame of the EC project ‘Review of Historical Seismicity in Europe (RHISE)’. The retrieval of earthquake records provides data on European and Mediterranean earthquakes. Sources and records are here analysed to verify their reliability and to understand the significance of the earthquake information they supply. Special attention has been paid to earthquakes that affected Italian territory, by means of a comparison between records and space-time, intensity parameters of the Italian seismic catalogue: this comparison shows that about 45% of the earthquakes mentioned by the periodicals are unknown in the Italian catalogue, and that 30% of them are damaging earthquakes.     

The October 6, 2008 Mw 6.3 magnitude Damxung earthquake,Yadong-Gulu rift,Tibet, and implications for present-day crustal deformation within Tibet

A Mw 6.3 magnitude earthquake occurred on October 6, 2008 in southern Damxung County within the N–S trending Yangyi graben, which forms the northern section of the Yadong-Gulu rift of south-central Tibet. The earthquake had a maximum intensity of IX at the village of Yangyi (also Yangying) (29°43.3′N; 90°23.6′E) and resulted in 10 deaths and 60 injured in this sparsely populated region. Field observations and focal mechanism solutions show normal fault movement occurred along the NNE-trending western boundary fault of the Yangyi graben, in agreement with the felt epicenter, pattern of the isoseismal contours, and distribution of aftershocks. The earthquake and its tectonic relations were studied in detail to provide data on the seismic hazard to the nearby city of Lhasa.The Damxung earthquake is one of the prominent events along normal and strike-slip faults that occurred widely about Tibet before and after the 2008 Mw 7.9 magnitude Wenchuan earthquake. Analysis of these recent M ? 5.0 earthquake sequences demonstrate a kinematic relation between the normal, strike-slip, and reverse causative fault movements across the region. These earthquakes are found to be linked and the result of eastward extrusion of two large structural blocks of central Tibet. The reverse and oblique-slip surface faulting along the Longmenshan thrust belt at the eastern margin of the Tibetan Plateau causing the Wenchuan earthquake, was the result of eastward directed compression and crustal shortening due to the extrusion. Prior to it, east–west extensional deformation indicated by normal and strike-slip faulting events across central Tibet, had led to a build up of the compression to the east. The subsequent renewal of extensional deformational events in central Tibet appears related to some drag effect due to the crustal shortening of the Wenchuan event. Unraveling the kinematical relation between these earthquake swarms is a very helpful approach for understanding the migration of strong earthquakes across Tibet.     

Late Holocene great earthquakes and relative sea‐level change at Kenai,southern Alaska

Kenai, located on the west coast of the Kenai Peninsula, Alaska, subsided during the great earthquake of AD 1964. Regional land subsidence is recorded within the estuarine stratigraphy as peat overlain by tidal silt and clay. Reconstructions using quantitative diatom transfer functions estimate co‐seismic subsidence (relative sea‐level rise) between 0.28±0.28 m and 0.70±0.28 m followed by rapid post‐seismic recovery. Stratigraphy records an earlier co‐seismic event as a second peat‐silt couplet, dated to ～1500–1400 cal. yr BP with 1.14±0.28 m subsidence. Two decimetre‐scale relative sea‐level rises are more likely the result of glacio‐isostatic responses to late Holocene and Little Ice Age glacier expansions rather than to co‐seismic subsidence during great earthquakes. Comparison with other sites around Cook Inlet, at Girdwood and Ocean View, helps in constructing regional patterns of land‐level change associated with three great earthquakes, AD 1964, ～950–850 cal. yr BP and ～1500–1400 cal. yr BP. Each earthquake has a different spatial pattern of co‐seismic subsidence which indicates that assessment of seismic hazard in southern Alaska requires an understanding of multiple great earthquakes, not only the most recent. All three earthquakes show a pre‐seismic phase of gradual land subsidence that marked the end of relative land uplift caused by inter‐seismic strain accumulation. Copyright © 2005 John Wiley & Sons, Ltd.