The traveltime perturbations for seismic body waves in factorized anisotropic inhomogeneous media

The traveltime perturbation equations for the quasi-compressional and the two quasi-shear waves propagating in a factorized anisotropic inhomogeneous (FAI) media are derived. The concept of FAI media simplifies considerably these equations. In the FAI medium, the density normalized elastic parameters a _ijkl ( X _i ) can be described by the relation a _ijkl ( X _i) = f ²( x _i ) A _ijkl, where A _ijkl are constants, independent of coordinates x _i and f ²( x _i) is a continuous smooth function of x _i . The types of anisotropy ( A _ijkl ) and inhomogeneity [ f ( x _i)] are not restricted. The traveltime perturbations of individual seismic body waves ( q ^P , qS 1 and qS 2) propagating in the FAI medium depend, of course, both on the structural pertubations [δ f ²( x _i)] and on the anisotropy perturbations (δ A _ijkl ), but both these effects are fully separated. The perturbation equations for the time delay between the two qS -waves propagating in the FAI medium are simplified even more. If the unperturbed (background) medium is isotropic, the perturbation of the time delay does not depend on the structural perturbations (δ f ²( x _i) at all. This striking result, valid of course only in the framework of first-order perturbation theory, will simplify considerably the interpretation of the time delay between the two split qS -waves in inhomogeneous anisotropic media. Numerical examples are presented.     

A uniformly valid asymptotic representation of normal mode multiplet spectra on a laterally heterogeneous Earth

Summary. A new asymptotic formula is obtained for the spectrum of an isolated normal mode multiplet _nS_l or _nT_l , with n ≪ l , on a laterally heterogeneous Earth. The principal feature of this formula is that it is uniformly valid on the Earth's surface, including near the epicentre and its antipode. The formal conditions for its validity are that | δm / m ₀|≪ 1 and s _max≪ l ≪ s _min| δm / m ₀|^–1, where | δm / m ₀| is the relative magnitude of the lateral heterogeneity, and s _min and s _max are the minimum and maximum significant degrees in its spherical harmonic expansion. As well as providing a basis for the geographical interpretation of near-epicentral or near-antipodal long-period recordings, the new formula also unifies the asymptotic theory and adds insight into the phenomena which govern the details of multiplet spectra in general.     

A note on the surface volume change of shallow earthquakes

Summary. This note presents an exact analytical formula for determining the magnitude of coseismic surface volume change (δ V ) of earthquake faults in a half-space. For a Poisson solid, the formula is remarkably simple; δ V = M _zz |8μ, where M _zz is one of the moment tensor elements of the source. Maximum δ V values derive from dip slip on faults plunging 45°. For these events, surface volume changes of 0.0001 and 4.3 km³ can be expected for magnitude 5 and 8 earthquakes respectively. All of the coseismic surface volume change is recovered in the interseismic period through relaxation of the Earth and rebound of the surface. A useful rule of thumb for estimating the magnitude of vertical rebound in 45° dip slip events is δ h _p=Δ s /24, where Δ s is the coseismic slip on the fault.     

Palaeomagnetism of Dhar traps and drift of the subcontinent during the Deccan volcanism

Summary. Palaeomagnetic investigations were carried out on nine lava flows around the Dhar region, which constitute the northern part of the Deccan traps. The stability of remanent magnetism of these specimens was analysed by an alternating magnetic field, thermal demagnetization and memory tests. Six flows exhibited characteristic components of magnetization, with a mean direction of D =143°, I =+46° ( K = 107.1, α₉₅=5.5°). This gives a VGP located at 29° N, 67° W (δ_p=4.5°, δ_m= 7.0°). The lower site with normal magnetization and the upper five sites with reverse magnetization indicate a geomagnetic field reversal during the initial phases of Deccan volcanism in the Early Tertiary period. A rapid northward migration of about 18° in latitude and a simultaneous anticlockwise rotation of 37° is calculated for the subcontinent.     

Three-dimensional VP and VP /VS models of the upper crust in the Friuli area (northeastern Italy)

3-D images of P velocity and P - to S -velocity ratio have been produced for the upper crust of the Friuli area (northeastern Italy) using local earthquake tomography. The data consist of 2565 P and 930 S arrival times of high quality. The best-fitting V _P and V _P / V _S 1-D models were computed before the 3-D inversion. V _P was measured on two rock samples representative of the investigated upper layers of the Friuli crust. The tomographic V _P model was used for modelling the gravity anomalies, by converting the velocity values into densities along three vertical cross-sections. The computed gravity anomalies were optimized with respect to the observed gravity anomalies. The crust investigated is characterized by sharp lateral and deep V _P and V _P / V _S anomalies that are associated with the complex geological structure. High V _P / V _S values are associated with highly fractured zones related to the main faulting pattern. The relocated seismicity is generally associated with sharp variations in the V _P / V _S anomalies. The V _P images show a high-velocity body below 6 km depth in the central part of the Friuli area, marked also by strong V _P / V _S heterogeneities, and this is interpreted as a tectonic wedge. Comparison with the distribution of earthquakes supports the hypothesis that the tectonic wedge controls most of the seismicity and can be considered to be the main seismogenic zone in the Friuli area.     

Palaeomagnetism of the Fongen-Hyllingen gabbro complex, southern Scandinavian Caledonides; plate rotation or polar shift?

Summary. Palaeomagnetic results are presented from the c . 160 km² Caledonian synorogenic layered Fongen-Hyllingen gabbro complex (of probable late Silurian age) located about 75 km SE of Trondheim, Norway, in the allochthonous Seve-Kdli Nappe Complex. A total of 80 oriented samples from eight sites in the northern part of the gabbro were investigated. After detailed af demagnetization two stable high coercivity components emerge: one with a well defined NW direction with D =325°, I =−21° (α₉₅=8°, N =8), and another, less well defined, probably younger, SW direction with D = 237°, I = 6° (α₉₅= 9°, N = 8). Correction for dip of these two directions gives D = 329°, I =−7° (α₉₅= 10°) and D = 238°, I =−11° (α₉₅= 12°), respectively. The corresponding pole positions are P ₁ : 19° N, 225° E and P ₂: 19° S, 308° E, respectively. The reversed pole -P ₂ of the SW direction lies close to other NW European palaeomagnetic poles of Caledonian, Upper Silurian-Lower Devonian age. However, the dominant pole PI is far away from these, and could be due to a late Caledonian geomagnetic excursion of considerable duration; or it could record a c . 90° rotation around a vertical axis of a crustal block within the Scandinavian Caledonides. Block rotation could have been related to nappe translation, although geological observations do not at present appear to support the occurrence of such an event.     

Palaeoclimatic record from a loess–soil profile in northeastern Bulgaria—II. Correlation with global climatic events during the Pleistocene

Magnetic susceptibility ( χ ) variations and the behaviour of the ratio of susceptibility to saturation magnetization ( χ/J _s ) along the loess/palaeosol section at Koriten (NE Bulgaria) are used to deduce climatic changes during the Pleistocene in southeastern Europe. A good correlation of susceptibility variations with the astronomically tuned oxygen isotope record from ODP site 677 enables us to propose a more precise dating of the upper part of the Bulgarian loess complex. Close correspondence between susceptibility and δ ^{1 8} O records demonstrates the global significance of the palaeoclimatic signal recorded, although differences in relative amplitudes of χ and χ/J _s and δ ^{1 8} O create difficulties in making quantitative estimates of the climatic humidity in the past. The role of local factors affecting the palaeoclimatic mineral magnetic record deduced from the profile studied in Bulgaria is discussed.     

Some comments on the descriptions of the polarization states of waves

Summary. Procedures are developed for specifying the polarization characteristics of n -dimensional waves, and in particular three-dimensional waves of geophysical interest. We show that when a wave is in a pure state or is totally polarized, all the polarization information can be represented by a single vector u in an n -dimensional unitary space. Simple measures of the degree of polarization of the wave are constructed from the characteristic equation of the spectral matrix S . These measures are functions only of the scalar invariants of S and consequently S need not be diagonalized. If S represents a purely polarized wave, the unitary vector which contains the polarization information about the wave can be obtained directly from S using any 2 n – 1 equations of n ² possible equations. By multiplying by a phase-factor this unitary vector can be written in the form u = r ₁+ i r ₂ where r ₁ and r ₂ are orthogonal vectors in a real space. For an elliptically polarized wave, r ₁ and r ₂ locate the major and minor axes of the ellipse, and the ellipticity is given by the ratio of their magnitudes. The polarization parameters of ULF magnetic waves at the Earth's surface are computed from one set of five equations ( n = 3) and compared with parameters calculated using established techniques.     

On the linear relation between mb and Ms for discrimination between explosions and earthquakes

Summary. The statistical capability of the m _b: M _s discriminant for the discrimination of earthquake and explosion populations is examined by application of discriminant functions to a group of 83 explosions and 72 earthquakes in Eurasia. Equations are derived for the probability that an event is an earthquake or an explosion. The positive sign of DIS in the decision index equation, DIS _i = 34.3383 – 11.9569 mb _t + 7.1161 M _si , indicates that the event i is an earthquake. Its negative sign indicates that event i is an explosion. The probability of correct classification for an event, P _i , is related to its DIS _i value, by P _i = [1-exp (DIS _i )]⁻¹, where a large, positive DIS indicates a high probability that an event is an earthquake and a large, negative DIS indicates a high probability that an event is an explosion. The discrimination line M _s = 1.680 m _b– 4.825, or m _b= 0.595 M _s+ 2.872 very successfully separates the explosion population from the earthquake population. The points on this line have an equal chance of being an earthquake or an explosion; moreover, for any event, the distance parallel to the M _s-axis from the point representing that event in the m _b: M _s plane to this line is a measure of the probability for the correct classification of that event.     

Focal mechanisms of recent earthquakes in the Southern Korean Peninsula

We evaluate the stress field in and around the southern Korean Peninsula with focal mechanism solutions, using the data collected from 71 earthquakes ( M_L = 1.9–5.2) between 1999 and 2004. For this, the hypocentres were relocated and well-constrained fault plane solutions were obtained from the data set of 1270 clear P -wave polarities and 46 SH / P amplitude ratios. The focal mechanism solutions indicate that the prevailing faulting types in South Korea are strike-slip-dominant-oblique-slip faultings with minor reverse-slip component. The maximum principal stresses (σ₁) estimated from fault-slip inversion analysis of the focal mechanism solutions show a similar orientation with E–W trend (269°–275°) and low-angle plunge (10°–25°) for all tectonic provinces in South Korea, consistent with the E–W trending maximum horizontal stress (σ_Hmax) of the Amurian microplate reported from in situ stress measurements and earthquake focal mechanisms. The directions of the intermediate (σ₂) and minimum (σ₃) principal stresses of the Gyeongsang Basin are, however, about 90 deg off from those of the other tectonic provinces on a common σ₂–σ₃ plane, suggesting a permutation of σ₂ and σ₃. Our results incorporated with those from the kinematic studies of the Quaternary faults imply that NNW- to NE-striking faults (dextral strike-slip or oblique-slip with a reverse-slip component) are highly likely to generate earthquakes in South Korea.     

Magnetic fabric and its significance in the Florianópolis dyke swarm, southern Brazil

Magnetic fabric was determined by applying the anisotropy from the low-field magnetic susceptibility (AMS) technique in 62 mafic dykes from the Mesozoic Florianópolis (Santa Catarina Island) dyke swarm, southern Brazil. These dykes cut the crystalline basement rocks, which are mainly Proterozoic. They are vertical or subvertical in dip and trend mainly NE, although NW-trending dykes are also found. Dykes are tholeiitic in composition and are geochemically similar to those from the Ponta Grossa swarm. Thicknesses vary from 0.3 to 60 m. Polished sections show that titanomagnetites carry the AMS in these dykes. Hysteresis parameters show that the magnetic minerals fall in the PSD range. Two types of magnetic fabric are recognized. Type I is characterized by K ₁- K ₂ parallel to the dyke wall, representing magma flow within the dykes; type II, with K ₁- K ₃ parallel to the dyke wall, was found in four dykes. Type I is found in 94 per cent of the dykes, and approximately 20 per cent of these have K ₁ inclinations of less than 30°, suggesting horizontal or subhorizontal flow. About 80 per cent have K ₁ inclinations of greater than 30°, due to inclined to vertical flow. The comparison of AMS studies from both the Florianópolis and the Ponta Grossa dykes suggests a source position closer to Santa Catarina Island than the Ponta Grossa arch.     

A normal approximation to the Fisher distribution

Summary. A simple normal approximation is given for the joint probability density function of the polar coordinates (θ, φ) of a random vector following the Fisher distribution with arbitrary mean direction (θ₀, φ₀). Two important applications of this approximation are discussed, and conditions for the validity of the approximation are investigated and summarized.     

Surface motion of a fluid planet induced by impacts

In order to approximate the free-surface motion of an Earth-sized planet subjected to a giant impact, we have described the excitation of body and surface waves in a spherical compressible fluid planet without gravity or intrinsic material attenuation for a buried explosion source. Using the mode summation method, we obtained an analytical solution for the surface motion of the fluid planet in terms of an infinite series involving the products of spherical Bessel functions and Legendre polynomials. We established a closed form expression for the mode summation excitation coefficient for a spherical buried explosion source, and then calculated the surface motion for different spherical explosion source radii a (for cases of   a / R = 0.001  to 0.035, R is the radius of the Earth) We also studied the effect of placing the explosion source at different radii r ₀ (for cases of   r ₀/ R = 0.90  to 0.96) from the centre of the planet. The amplitude of the quasi-surface waves depends substantially on a / R , and slightly on   r ₀/ R   . For example, in our base-line case,   a / R = 0.03, r ₀/ R = 0.96  , the free-surface velocity above the source is 0.26 c , whereas antipodal to the source, the peak free surface velocity is 0.19 c . Here c is the acoustic velocity of the fluid planet. These results can then be applied to studies of atmosphere erosion via blow-off caused by asteroid impacts.     

The solution of the inverse gravity potential problem for cylindrical bodies

Summary. The inverse gravity potential problem consists in the determination of the form and the density of the body by its exterior gravity potential. We describe two similar classes of bodies for which this problem has a unique constructive solution.
(1) The first class contains the cylindrical bodies with finite length, arbitrary form of section and ρ( R , ø, z) =ρ₁( z )ρ₂( R , ø) density distribution, where z is the cylindrical coordinate; R , ø are the polar coordinates in a section plane. This class is important for prospecting geophysics in that it allows us to determine in a unique and constructive way, the function ρ₁( R , ø), the length, form and orientation of the cylinder if we know the function ρ₁( z ) and the exterior potential. The classical moment problem of functions is the basis for the solution of this problem.
(2) The analogous problem for the class of the spherical cylinders, or bodies bounded by arbitrary similar sections of two different concentric spheres and the radial lateral surface, appears when bodies of planetary size are studied. (An example of these bodies would be the Moon mascons.) The density distribution of these cylinders is ρ(τ, θ, ø) =ρ₁(τ)ρ₂(θ, ø) where τ, θ, ø are the spherical coordinates. The function ρ₁(θ, ø), length and form of spherical sections can be uniquely determined by exterior potential if we know the function ρ₁(τ). We propose a new constructive method for harmonic continuation of the gravity potential into the region containing the perturbing masses for the solution of the problem.     

Magnetotelluric response of a uniformly stratified earth containing a magnetized layer

Summary The magnetotelluric (MT) response is studied of a uniformly stratified earth which contains a magnetized layer. The impedance as a function of the layer parameters (resistivity, ρ permeability, μ and thickness h ) is discussed. The MT response from a layer (μ, ρ, h ) is equivalent to that from a layer (μ/μ_r=μ₀, μ_rρ, μ_r h ) where μ_r is the relative permeability of the layer. Thus the effect of a magnetized layer is to make it apppear μ_r times more resistive and μ_r times thicker than an unmagnetized equivalent layer. Master curves of apparent resistivity and phase are computed for three-layer models with varying permeability associated with varying resistivity in each layer. An example of MT field data is presented in which the most reasonable interpretation is that a magnetized layer exists beneath the observatory site.     

A comment on depths of sources of anomalies in the Earth's gravity field

Summary. One method to determine the depths of sources of anomalies in the Earth's gravity field is to plot log [(2 n + 1) σ _n ] versus n where σ _n is the n th term in the amplitude spectrum of the Earth's gravitational potential. This procedure assumes that the amplitude spectrum of the anomalous density variations does not vary with n. Such an assumption may not apply to the Earth.     

Coupled normal-mode sensitivity to inner-core shear velocity and attenuation

We have studied the response of normal modes to perturbations in inner-core shear velocity and attenuation, using fully coupled mode synthetics. Our results indicate that (i) mode pairs   _n S _l – _{n ±1} S _l   are strongly coupled by anelasticity, (ii) this coupling causes shear velocity perturbations to strongly affect the Q values of modes through exchange of inner-core characteristics, (iii) there is no evidence for a weakly attenuating inner core in shear, and (iv) the discrepancy between attenuation models returned from normal modes and body waves is small. These results suggest that inversions for inner-core attenuation and shear velocity should be performed simultaneously and should take account of the strong cross-coupling due to attenuation.     

Regional variations of heat flow differences with depth in Alberta, Canada

Summary. Differences between estimated average heat flow values for the Mesozoic and Cenozoic formations ( Q ₁) and estimated average heat flow values for the Palaeozoic formations below the erosional unconformity ( Q ₂) are calculated for the Alberta part of the western Canadian sedimentary basin. Significant heat flow differences exist for these two intervals and the map of Δ Q = Q ₁– Q ₂ shows that Q ₂ is generally greater than Q ₁ in the western and south-western part of Alberta, while in the northern part of the province Q ₂ is generally less than Q ₁. The regional variations of Δ Q are large, with standard deviation of 26 mW m⁻² and average value –13.5 mW m⁻². A regional trend of Δ Q correlates with topographic relief and the hydraulic head variations in the basin. It is shown that there is a heat flow increase with depth in water recharge areas and a decrease in heat flow with depth in the low topographic elevation water discharge areas when comparing the average heat flow in Mesozoic + Cenozoic and Palaeozoic formations.     

Tidal gravity in Britain: tidal loading and the spatial distribution of the marine tide

Summary. Tidal gravity measurements have been made at six sites in Britain with two nulled LaCoste and Romberg Earth tide gravitymeters. The M ₂ observations from these and two further sites are compared with calculations of the tidal loading from the seas around the British Isles and the major oceans. Models of the M ₂ marine tides are convolved with Green's functions for appropriate radially stratified Earth models. The differences between the M ₂ observations and the theoretical calculations are less than 0.6 μ gals and it is shown that these differences contain further information concerning the errors in the marine tide models. The M ₂ marine tides on the north-west European continental shelf are reasonably well known and this allows a useful test of the feasibility of using tidal gravity measurements for the inverse ocean tide problem in areas where the ocean tides are less well known. The differential gravity loading signal between pairs of gravity stations is shown to be important for considerations of the uniqueness and accuracy of the inverse problem. M ₂ tidal gravity loading maps for the British Isles and Europe have been produced which are of use in making corrections to various geodetic measurements.     

An experimental study of the intensity and stability of thermoremanent magnetization acquired by synthetic monodomain titanomagnetite substituted by aluminium

Summary. Titanomagnetites of composition Fe_2.4-δAl_δTi_0.6O₄ and Fe_2.6-δAl_δTi_0–4O₄(δ=0, 0.1 and 0.2 in both cases) were prepared in the monodomain state by pulverization of sintered synthetic material. In low fields, the thermoremanence (TRM) was found to be linear with inducing field and of high enough intensity to account for typical natural remanent magnetizations of fresh submarine basalts. The higher field TRM acquisition curves follow the Néel model curve for an assemblage of non-interacting identical particles in a general way only, the differences being due to interactions, or the range of particle blocking temperatures and volumes or other features of the samples not included in the model. The unblocking temperatures of low field TRM lie in a narrow range below the Curie point. The low field TRM is very resistant to alternating field demagnetization and provides a very striking illustration of the strength of the TRM mechanism in preserving a stable record of a weak magnetic field. The result of a Lowrie-Fuller test on the material is consistent with the monodomain state.