Syn‐rift sequence development in a fault‐controlled embayment (Early Permian Irwin River Coal Measures,Northern Perth Basin,Western Australia)

Stratigraphic patterns and sequence development in tectonically active extensional basins remain poorly documented in comparison with passive‐margin settings. Rift basin fills are generally characterized by coarsening‐upward trends in response to the rapid creation of accommodation by extensional faulting, and the progressive filling of graben during more quiescent periods. The Early Permian Irwin River Coal Measures in the Northern Perth Basin (Western Australia) record a complex stratigraphic arrangement of conglomerate, sandstone, mudstone and coal, and have been attributed to delta plain depositional environments that developed in a cool–temperate climatic setting during syn‐rift activity. Sedimentary analysis of outcrop and core data from the fault‐bounded Irwin Terrace is used to distinguish nine facies associations reflecting deposition in braided rivers, fixed‐anastomosed channel belts, tide‐influenced coastal environments and storm‐affected distal bays. The broader depositional system is interpreted as a morphologically asymmetrical tide‐dominated embayment with a fluvial and wave influence. The stratigraphic architecture of the Irwin River Coal Measures was strongly influenced by the evolving rift basin margin. Fault reactivation of the major basin‐bounding Darling Fault in the early syn‐rift phase caused footwall uplift and the inception of transverse palaeo‐valleys occupied by braided fluvial systems. Fault block subsidence during the subsequent balanced, backstepping and drowning phases resulted in a dominantly retrogradational stacking pattern indicating progressive flooding of marginal‐marine areas and culminating in deposition of distal marine elements. In the active rift basin, it is proposed that preservation of a shallow‐marine syn‐rift sequence was promoted by the geomorphological confinement of the embayed system increasing tidal current acceleration and hampering transgressive ravinement. The proposed sequence model demonstrates that transgressive successions can develop in the early syn‐rift phase in response to footwall uplift and tectonic subsidence. The syn‐rift sequence recording the filling of an embayment on a rift basin margin may be applied in similar tectonic and/or depositional contexts worldwide.     

Delta-fed turbidites in a lacustrine rift basin: the Eocene Dongying depression,Bohai Bay Basin,East China

Sediment avalanche from delta ramp is one of the significant development mechanisms for a turbidite system in a lacustrine basin. To advance our understanding of deep-water sedimentary processes in a lacustrine delta ramp, delta-fed turbidites in the Eocene Dongying depression of the Bohai Bay Basin were studied using core data, 3-D seismic data and well log data. Sandy debris flows, muddy debris flows, mud flows, turbidity currents, slides, sandy slumps and muddy slumps were interpreted based on the identification of lithofacies. Data indicates that deep-water sedimentary processes in the study area were dominated by debris flows and slumps, which accounted for ～68% and 25% (in thickness) of total gravity flow deposits, respectively; turbidity-current deposits only accounted for ～5%. Mapping of turbidites showed that most were deposited after short-distance transportation (<20 km), restricted by the scale of deep-water areas and local topography. Channels, depositional lobes, debris flow tongues, muddy turbiditic sheets, slides and slumps were identified in a delta-fed ramp system. Slides and slumps were dominant at the base of slopes or at the hanging walls of growth faults with strong tectonic activity. Channels and depositional lobes developed in gentle, low-lying areas, where sediments were transported longer distances. Sand-rich sediment supply, short-distance transportation and local topography were crucial factors that controlled sedimentation of this ramp system. Channels generally lacked levees and only produced scattered sandstones because of possible hydroplaning of debris flow and unstable waterways. In addition to lobes, debris flow tongues could also be developed in front of channels. These findings have significant implications for hydrocarbon exploration of deep-water sandstone fed by deltas in a lacustrine basin.     

Stratigraphic responses to a major tectonic event in a foreland basin: the Ecuadorian Oriente Basin from Eocene to Oligocene times

The Eocene to Oligocene sediments of the Ecuadorian Oriente Basin record two kinds of second-order stratigraphic response to the tectonic evolution. Lower Eocene shows evidences of local scale syntectonic deposits. This tectonic activity can be related to right lateral convergent movements inverting pre-cretaceous extensional structures. Upper Eocene and Oligocene sediments are integrated as the expression of an isostatic rebound characterizing a basin scale syntectonic deposition. This response is evidenced by a reciprocal architecture of the depositional sequences identified in the sedimentary formations. These data have allowed us to propose a new geodynamic model for the Paleogene evolution of the Oriente Basin.     

断陷湖盆差异湖侵过程与层序格架下沉积体系特征响应: 以霸县凹陷古近系沙河街组为例*

断陷湖盆充填演化过程中发生的多期差异湖侵,控制了层序格架及其内部沉积体系类型和分布。基于霸县凹陷的三维地震资料,结合800口探井钻/测井、岩心及古生物等资料,在明确古近系湖盆演化过程的基础上,以沙河街组三段和一段为研究目标,分析差异湖侵作用过程中的层序结构及层序格架下的沉积差异特征。研究结果表明,沙三段沉积时期的缓慢湖侵过程中发育断坡—坡折层序结构,以多期退积型三角洲、扇三角洲沉积为主,形成厚层优质烃源岩。沙一段沉积时期的快速湖侵过程中,形成弯折—宽缓坡型层序结构样式,发育混积滩坝、小型近岸水下扇(扇三角洲)沉积。根据上述研究结果,认为断陷湖盆差异沉降控制了层序结构样式,古地貌和物源供给调节岩相的空间分布,湖盆不同演化阶段层序结构和沉积体系都存在显著的差异。在此基础上,建立差异湖侵作用下沉积体系特征的响应模型,可为同类型盆地中的油气勘探特别是岩性油气藏的勘探提供借鉴。     

Differential transgression of rift basin and characteristic response of sedimentary system within sequence framework: An example from the Paleogene Shahejie Formation in Baxian sag,Bohai Bay Basin

Multi-stage differential transgression controls sequence architecture and its sedimentary type and distribution during the tectonic evolution of lacustrine rift basin. Combined with the seismic data of the Baxian sag as well as drilling,logging,core and paleontological materials from 800 exploration wells,the study targeted the Members 1 and 3 of the Shahejie Formation to analyze sequence architecture and sedimentological difference within the sequence framework during the differential lake transgression,based on the investigation of the Paleogene lake basin evolution. The results showed that the fault slope-break slope architecture was well developed with back-stepping deltas and fan deltas during the slow lake transgression of the Member 3 of Shahejie Formation,in which forms thick high quality source rocks. The flexural-gentle slope architecture was well developed with mixed beach bar and small scale nearshore subaqueous fans(fan deltas)during the rapid transgression of the Member 1 of Shahejie Formation. The differential subsidence controlled the sequence architecture,paleogeomorphology and provenance supply,regulating the spatial lithological distribution. And there are significant differences in sequence architecture and sedimentary system during the different evolution stages of the lake basin. On this basis,the response model of sedimentary system characteristics under differential lacustrine transgression is established,which can be used for reference for oil and gas exploration,especially for lithologic oil and gas reservoir in the same type of basin.     

Active synsedimentary tectonism on a mixed carbonate–siliciclastic continental margin: third‐order sequence stratigraphy of a ramp to basin transition,lower Sekwi Formation,Selwyn Basin,Northwest Territories,Canada

The lower part of the Early Cambrian Sekwi Formation in the Selwyn Basin of the Northwest Territories, Canada, is composed of two regional, unconformity‐bounded sequences, S0 and S1, which record the first widespread carbonate deposition during the initial Palaeozoic transgression onto the western margin of Laurentia. These Early Cambrian sequences are unique to the western North American Cordillera, representing the only record of primarily deep‐water deposition on a tectonically active, mixed carbonate–siliciclastic ramp during this period. More specifically, the geometry of the Sekwi ramp changed during deposition of S0 and S1, from a shallowly dipping homoclinal ramp during the S0 transgressive systems tract to a steeply dipping tectonically modified ramp during the early highstand systems tract of S0. The steeply dipping ramp profile of S0 was preserved into the early transgressive systems tract of S1. The Sekwi ramp returned to a gently sloping ramp during the late highstand systems tract of S1 and remained so throughout the remainder of Sekwi deposition. The evolving shape of the Sekwi ramp is attributed to syndepositional ‘down to the basin’ faulting during deposition of both S0 and S1 and is recorded by: (i) the westward thickening, irregular geometries of S0 and S1; (ii) geographical restriction of deep‐water facies (including sediment gravity flow deposits); (iii) the presence of large allochthonous blocks; and (iv) the clast composition of sediment gravity flow deposits. Sediment gravity flow deposits play an unusually important role in the sequence stratigraphic interpretation of the lower Sekwi Formation, as they delineate depositional packages, including the maximum flooding zone, the transitions between portions of systems tracts, and the inferred locations of syntectonic extensional faults. Syntectonic faults increased accommodation basinward of an extensive ooid‐shoal complex that developed along the Sekwi ramp crest, greatly influencing sequence geometry and initiating the downslope motion of sediment gravity flows. The syndepositional faulting probably was a continuation of extension that began during the latest Neoproterozoic rifting of western Laurentia. The composition of sediment gravity flow deposits track changing accommodation space on the lower Sekwi ramp and can be used to differentiate systems tracts that probably were related more to tectonism than eustasy.     

Early Cretaceous trachybasalt-trachyte-trachyrhyolitic volcanism in the Nyalga basin (Central Mongolia): sources and evolution of continental rift magmas

As shown by geological, mineralogical, and isotope geochemical data, trachybasaltic-trachytic-trachyrhyolitic (TTT) rocks from the Nyalga basin in Central Mongolia result from several eruptions of fractionated magmas within a short time span at about 120 Ma. Their parental basaltic melts formed by partial melting of mantle peridotite which was metasomatized and hydrated during previous subduction events. Basaltic trachyandesites have high TiO₂ and K₂O, relatively high P₂O₅, and low MgO contents, medium ⁸⁷Sr/⁸⁶Sr(₀) ratios (0.70526-0.70567), and almost zero or slightly negative ε_Nd(T) values. The isotope geochemical signatures of TTT rocks are typical of Late Mesozoic basaltic rocks from rift zones of Mongolia and Transbaikalia. The sources of basaltic magma at volcanic centers of Northern and Central Asia apparently moved from a shallower and more hydrous region to deeper and less hydrated lithospheric mantle (from spinel to garnet-bearing peridotite) between the Late Paleozoic and the latest Mesozoic. The geochemistry and mineralogy of TTT rocks fit the best models implying fractional crystallization of basaltic trachyandesitic, trachytic, and trachyrhyodacitic magmas. Mass balance calculations indicate that trachytic and trachydacitic magmas formed after crystallization of labradorite-andesine, Ti-augite, Sr-apatite, Ti-magnetite, and ilmenite from basaltic trachyandesitic melts. The melts evolved from trachytic to trachyrhyodacitic and trachyrhyolitic compositions as a result of prevalent crystallization of K-Na feldspar, with zircon, chevkinite-Ce, and LREE-enriched apatite involved in fractionation. Trachytic, trachyrhyodacitic, and trachyrhyolitic residual melts were produced by the evolution of compositionally different parental melts (basaltic trachyandesitic, trachytic, and trachyrhyodacitic, respectively), which moved to shallower continental crust and accumulated in isolated chambers. Judging by their isotopic signatures, the melts assimilated some crustal material, according to the assimilation and fractional crystallization (AFC) model.     

Unconventional distribution of facies in a continental rift basin: the Pliocene–Pleistocene Mangas Basin, south-western New Mexico, USA

The Pliocene–Early Pleistocene Mangas Basin in SW New Mexico, USA, was a N–NW-trending full graben that changed southward to an eastward-tilted half graben. Unlike the facies distribution predicted in existing models, the half-graben part of the Mangas Basin was characterized by broad alluvial fans derived from the footwall scarp, smaller hangingwall-derived alluvial fans, and a shallow, closed lake (Lake Buckhorn) that locally lapped onto the hangingwall hills. The distribution of facies within the full-graben part of the Mangas Basin was also unlike that predicted in current models, primarily because of a broad belt of alluvial-fan sediment derived from the eastern footwall scarp and a narrow belt of axial-fluvial sediment adjacent to the western footwall scarp. The distribution of facies in the Mangas Basin does not appear to have been controlled by the eastward tilt of the floor of the half graben or ‘see-saw’ motion of the floor of the full graben, as predicted by existing models, but rather by the large size of the alluvial fans on the eastern side of the basin. These fans were derived from large, high-relief catchments on the footwall scarp of the Mogollon Mountains, the uplift of which began during Early Miocene. This example illustrates how earlier uplift and drainage development in a mountain range may influence facies distribution in a younger extensional basin.     

The Eocene Southern Vancouver Island Orocline — a response to seamount accretion and the cause of fold-and-thrust belt and extensional basin formation

A deflection of the fault controlled southwestern coastline of Vancouver Island suggests the presence of a minor orocline, with a Southern Crustal Block (south of Barkley Sound–Alberni Inlet) rotated 20° counterclockwise relative to a Northern Fixed Crustal Block about a pole of rotation located northeast of Port Alberni. In this paper two models of orocline development, one of pure block rotation and one of pure bending, are proposed. The predictions of these models are tested against available geological maps, structural orientation data, identified regions of extension and contraction, and paleomagnetic data. Structural orientation and paleomagnetic data are consistent with 18° of post-Late Cretaceous counter clockwise rotation of the Southern Crustal Block relative to the Northern Fixed Crustal Block. A southward increase in the magnitude of rotation evident in the structural orientation data argues for a model of bending. Both bending and block rotation models predict the development of a zone of contraction along the northeast margin of the Southern Crustal Block, coincident with the location of the Eocene Cowichan fold-and-thrust belt, that diminishes northward toward the pole of rotation. As predicted, the fold-and-thrust belt is characterized by a northerly decrease in the amount of shortening, from >30% at the south end of the thrust belt, to 0% shortening north of Port Alberni. The northerly decrease in shortening is complemented by a north to south change in structural style from cylindrical to conical folds, and finally to planar, undeformed strata. The model of block rotation predicts the presence of a zone of extension extending southwest from the zone of rotation, coincident with the location of Eocene extensional structures within Barkley Sound and with horst and graben structures in the offshore Eocene to Miocene Tofino basin. Extension is less than predicted by a model of pure block rotation and suggests that much of the oroclinal rotation was accommodated by bending. Timing constraints indicate that orocline development was coeval with, and resulted from, the Eocene accretion of seamounts of the Crescent terrane. These findings demonstrate that oroclinal orogeny, the buckling of a linear crustal beam about vertical axes of rotation, can significantly impact the geometry, structure and character of an orogenic belt, even where the buckles are minor (<20° of rotation).     

Late Carboniferous–Early Permian Sequence Stratigraphy and Depositional Evolution in the Northeast Ordos Basin, North China

Sequence stratigraphical analysis was applied to the Upper Carboniferous–Lower Permian sedimentary succession of the northeastern Ordos Basin, north China based on data acquired from ten entire logging curves and eight outcrops. The facies framework of the lithostratigraphical unit, the Taiyuan Formation comprises seven facies in two facies associations, varying from fluvio-delta to shelf-barrier islands. The facies are presented within a chronostratigraphical framework, linked by systems tract, which in turn are limited by flooding surfaces and sequence boundaries. Six third-order depositional sequences are recognised, bounded by six type 2 unconformities. An upwards-shallowing epicontinental sea sedimentary model is created, which consists of a sandstone, coal seam and carbonate succession.     

Climatic and tectonic controls on carbonate deposition in syn‐rift siliciclastic fluvial systems: A case of microbialites and associated facies in the Late Jurassic

This work provides new insights to assess the factors controlling carbonate deposition in the siliciclastic fluvial systems of rift basins. Sedimentological and stable‐isotope data of microbialites and associated carbonate facies, along with regional geological information, are shown to reveal the influence of climate and tectonics on the occurrence and attributes of carbonate deposits in these settings. The Vega Formation – a 150 m thick Lower Kimmeridgian siliciclastic fluvial sequence in Asturias Province (northern Spain) – constitutes a candidate for this approach. This unit includes varied facies (stromatolites; rudstones, packstones and wackestones containing oncoids, intraclasts, charophytes and shell bioclasts; marlstones and polygenic calcareous conglomerates) that formed in a low‐gradient fluvial–lacustrine system consisting of shallow, low‐sinuosity oncoid‐bearing channels and pools within marshy areas, with sporadic coarse alluvial deposition. The sedimentological attributes indicate common erosion by channel overflow and rapid lateral changes of subenvironments caused by water‐discharge variations. The carbonate fluvial–lacustrine system developed near uplifted marine Jurassic rocks. The occurrence of the system was conditioned by normal faults (active during the deposition of the unit) that favoured: (i) springs of HCO₃–Ca‐rich water from a Rhaetian–Sinemurian carbonate rock aquifer; and (ii) carbonate deposition in areas partially isolated from the adjacent siliciclastic fluvial system. The microbialite δ¹³C and δ¹⁸O values support deposition in a hydrologically open system, fed by ambient‐temperature meteoric water, with riparian vegetation. Three types of lamination in the stromatolites and oncoids reflect distinct morphological types of cyanobacterial communities. The textural pattern of lamination parallels δ¹³C and δ¹⁸O changes, suggesting short‐term cycles of precipitation and temperature. A moderately to strongly contrasted seasonal and/or pluriannual precipitation regime is inferred from the cyclic δ¹³C pattern of the lamination and from the discontinuous and asymmetrical growth of oncoids. Thus, the isotopic and sedimentological attributes of the carbonate deposits were linked to short‐term climate changes associated with semi‐arid conditions, consistent with the studied climatic zone.     

Sequence stratigraphy of a Late Devonian ramp-situated reef system in the Western Canada Sedimentary Basin: dynamic responses to sea-level change and regressive reef development

The Alexandra Formation, located in the Northwest Territories of Canada, is formed of a Late Devonian (Frasnian) reef system that developed on a gently sloping, epicontinental ramp in the Western Canada Sedimentary Basin. High‐resolution sequence stratigraphic analysis of its deposits delineates two reef complexes that are separated by a Type I sequence boundary. The second reef complex developed on the outer ramp, basinward of the first, after sea‐level fell ≈17 m. Stratigraphic complexity of the second reef complex was a result of its initiation during forced regression, and its development through an entire cycle of sea‐level rise followed by sea‐level fall. Its highstand systems tract was not characterized by high rates of carbonate production or sediment shedding. Rather, these features took place as sea‐level fell, after its highstand systems tract. The sequence stratigraphic framework of this regressive reef system highlights a number of depositional parameters that differ from high‐relief, shelf‐situated reef systems with steep, narrow margins. These have implications for understanding the controls on the development of ramp‐situated reef systems, and the nature of reef systems with gently sloping profiles. This study demonstrates that the development of stromatoporoid reef systems may be far more complex than generally realized, and that high‐resolution sequence stratigraphy may provide the tools for better understanding of complex, often enigmatic, aspects of these systems.     

Styles of interaction between aeolian,fluvial and shallow marine environments in the Pennsylvanian to Permian lower Cutler beds,south‐east Utah,USA

The Pennsylvanian to Permian lower Cutler beds comprise a 200 m thick mixed continental and shallow marine succession that forms part of the Paradox foreland basin fill exposed in and around the Canyonlands region of south‐east Utah. Aeolian facies comprise: (i) sets and compound cosets of trough cross‐bedded dune sandstone dominated by grain flow and translatent wind‐ripple strata; (ii) interdune strata characterized by sandstone, siltstone and mudstone interbeds with wind‐ripple, wavy and horizontal planar‐laminated strata resulting from accumulation on a range of dry, damp or wet substrate‐types in the flats and hollows between migrating dunes; and (iii) extensive, near‐flat lying wind‐rippled sandsheet strata. Fluvial facies comprise channel‐fill sandstones, lag conglomerates and finer‐grained overbank sheet‐flood deposits. Shallow marine facies comprise carbonate ramp limestones, tidal sand ridges and bioturbated marine mudstones. During episodes of sand sea construction and accumulation, compound transverse dunes migrated primarily to the south and south‐east, whereas south‐westerly flowing fluvial systems periodically punctuated the dune fields from the north‐east. Several vertically stacked aeolian sequences are each truncated at their top by regionally extensive surfaces that are associated with abundant calcified rhizoliths and bleaching of the underlying beds. These surfaces record the periodic shutdown and deflation of the dune fields to the level of the palaeo‐water‐table. During episodes of aeolian quiescence, fluvial systems became more widespread, forming unconfined braid‐plains that fed sediment to a coastline that lay to the south‐west and which ran approximately north‐west to south‐east for at least 200 km. Shallow marine systems repeatedly transgressed across the broad, low‐relief coastal plain on at least 10 separate occasions, resulting in the systematic preservation of units of marine limestone and calcarenite between units of non‐marine aeolian and fluvial strata, to form a series of depositional cycles. The top of the lower Cutler beds is defined by a prominent and laterally extensive marine limestone that represents the last major north‐eastward directed marine transgression into the basin prior to the onset of exclusively non‐marine sedimentation of the overlying Cedar Mesa Sandstone. Styles of interaction between aeolian, fluvial and marine facies associations occur on two distinct scales and represent the preserved expression of both small‐scale autocyclic behaviour of competing, coeval depositional systems and larger‐scale allocyclic changes that record system response to longer‐term interdependent variations in climatic and eustatic controlling mechanisms. The architectural relationships and system interactions observed in the lower Cutler beds demonstrate that the succession was generated by several cyclical changes in both climate and relative sea‐level, and that these two external controls probably underwent cyclical change in harmony with each other in the Paradox Basin during late Pennsylvanian and Permian times. This observation supports the hypothesis that both climate and eustasy were interdependent at this time and were probably responding to a glacio‐eustatic driving mechanism.     

Fission‐track dating of a tephra layer related to Poti‐Malal and Seguro drifts in the Río Grande basin,Mendoza, Argentina

Two old drift units called Poti‐Malal and Seguro have been differentiated in the Río Grande basin based on relative‐age criteria, stratigraphical relationships, morphology and fission‐track dating. A tephra dated at 0.226 ± 0.025 Ma was deposited on the Poti‐Malal drift and underlies the Seguro outwash, which is inferred to equate with marine oxygen isotope stage 6. The stratigraphical position and age suggest that the tephra post‐dates the Poti‐Malal glaciation and that it is older than the Seguro drift. The Poti‐Malal glaciation must be at least as old as Early–Middle Pleistocene, and the Seguro glaciation is assigned to the penultimate glaciation. The tephra unit may have been deposited during marine oxygen isotope stage 7. Copyright © 2002 John Wiley & Sons, Ltd.     

Depositional systems and sequence stratigraphy analysis of the Upper Callovian to Tithonian sediments in the Central and Western Kopet‐Dagh Basin,Northeast Iran

Upper Callovian to Tithonian (late Jurassic) sediments represent an important hydrocarbon reservoir in the Kopet‐Dagh Basin, NE Iran. These deposits consist mainly of limestone, dolostone, and calcareous mudstone with subordinate siliciclastic interbeds. Detailed field surveys, lithofacies and facies analyses at three outcrop sections were used to investigate the depositional environments and sequence stratigraphy of the Middle to Upper Jurassic interval in the central and western areas of the basin. Vertical and lateral facies changes, sedimentary fabrics and structures, and geometry of carbonate bodies resulted in recognition of various carbonate facies related to tidal flats, back‐barrier lagoon, shelf‐margin/shelf‐margin reef, slope and deep‐marine facies belts. These facies were accompanied by interbedded beach and deep marine siliciclastic petrofacies. Field surveys, facies analysis, parasequences stacking patterns, discontinuity surfaces, and geometries coupled with relative depth variation, led to the recognition of six third‐order depositional sequences. The depositional history of the study areas can be divided into two main phases. These indicate platform evolution from a rimmed‐shelf to a carbonate ramp during the late Callovian–Oxfordian and Kimmeridgian–Tithonian intervals, respectively. Significant lateral and vertical facies and thickness changes, and results obtained from regional correlation of the depositional sequences, can be attributed to the combined effect of antecedent topography and differential subsidence related to local tectonics. Moreover, sea‐level changes must be regarded as a major factor during the late Callovian–Tithonian interval. Copyright © 2015 John Wiley & Sons, Ltd.     

The infill of a supradetachment(?) basin: the continental to shallow-marine Upper Permian succession in the Dolomites and Carnia (Italy)

In the Dolomites and Carnia (eastern Southern Alps), the Upper Permian succession is represented by red beds of Val Gardena Sandstone, grading upwards and eastwards into the evaporitic and carbonate deposits of the Bellerophon Formation.

An overall transgressive pattern is shown by the general trend of the depositional setting, which evolved from flashy alluvial fans, through multiple-channel bedload rivers, mixed-load sinuous rivers, terminal fans, coastal sabkha and evaporitic lagoon, to a shallow, low-gradient marine ramp. The inferred fluvial regime was subject to rapid and erratic fluctuations in discharge. Palaeosols are represented by calcic soils, and suggest a warm to hot, semi-arid or dry subhumid climate with strongly seasonal rainfall. Vertic features are associated with more inland alluvial complexes: they are missing in the terminal-fan deposits, suggesting greater aridity in lowland (coastal) areas.

The Bellerophon Fm. consists of two units: a lower evaportte-bearing unit, deposited in a barred basin, and an upper shallow-marine carbonate unit, laid down on a very low-energy, low-gradient ramp.

Five third-order sequences and the lower part of a sixth sequence, collectively showing a backstepping pattern, have been identified in the succession. Due to the presence of a very low-gradient ramp margin, and the consequent ineffectiveness of relative sea-level falls in producing large-scale erosion in coastal areas, it is suggested that, rather than eustatic changes, degradational episodes marking sequence boundaries in the red-bed succession reflect changes in the climate-modulated intrinsic variables of discharge and sediment supply, and/or tectonic uplift.

Base level rises in, red-bed sequences are recorded by upward change from thick channel-belt sandstone bodies with an often high connectedness ratio, to progressively thinner channel deposits, ranging from isolated ribbons to channel-belt sandstone bodies potentially reaching high width/thickness ratios, encased in a comparably greater volume of overbank fines. This trend is thought to reflect the change from a confined geomorphic setting, with a limited area of potential avulsion, to an unrestricted setting with rivers free to move extensively; in addition, it documents the transition from an inland fluvial system with laterally migrating perennial or semi-perennial channels, to an ephemeral network of randomly migrating and frequently avulsing small terminal-fan distributaries, through a drastic downstream decrease in channel depth and discharge.

Identification of key sequence-stratigraphic relationships within the red-bed succession was mostly aided by the presence of easily recognizable and regionally correlated marine and marginal marine bed packages, traceable landwards into alluvial deposits showing faint traces of tidal activity, interpreted as the equivalent of marine maximum-flooding sediments. They may grade upwards into progradational fluvial packages showing basinward increase in thickness.

The Upper Permian deposits of the Southern Alps are considered part of an Upper Permian-Lower Triassic, second-order, structurally controlled sequence. The location of the basin on a thickened, previously active crust, affected by thermal perturbance after the last stages of the Variscan orogeny, the relatively reduced thickness of the basin fill, and predominantly long, transverse drainage networks, mostly derived from the denuded Insubric footwall, all suggest that sedimentation took place in a supradetachment basin, with a major detachment fault located in the palaeo-Insubric belt.     

Forced regressive deposits of a deglaciation sequence: Example from the Late Quaternary succession in the Lake Saint‐Jean basin (Québec,Canada)

Differentiating between forced regressive deposits from deglacial periods in high latitude domains and forced regressive deposits from the onset of glacial periods in low latitude domains is fundamental for the accurate interpretation of glacial cycles within the geological record and then for the reconstruction of palaeogeography and palaeo‐climate. A forced regressive deglacial sequence is documented from the Lake Saint‐Jean basin (Québec, Canada). In this area, the Late Pleistocene to Holocene sediments have recorded the Laurentide ice sheet retreat accompanied by the invasion of marine waters (Laflamme Gulf) from ca 12·9 cal kyr bp . Subsequently, fluvio‐deltaic and coastal prograding wedges were deposited; they followed the base‐level fall due to glacio‐isostatic rebound. This succession, representing a transition from glacial to post‐glacial periods within a previously glaciated area, was investigated through recent mapping, preserved landforms, facies analysis, and new optical stimulated luminescence and radiocarbon dates. Three basin‐scale geological sections share a common lower part made of isolated ice‐contact fan deposits overlying bedrock. Throughout the entire basin, ice‐contact fans are capped by glacimarine muds. Above, fluvial and coastal prograding systems were deposited and evolved through four steps: (i) deltaic systems progressively increased in width; (ii) coastal influence on sedimentation increased; (iii) hydrographic drainage systems became more organised; and (iv) deltas graded from steep (Gilbert delta) to low‐angle foresets (mouth‐bar delta). Deposited during the base‐level fall from glacio‐isostatic rebound, the complete succession has been designated as a single falling stage system tract referred to as a deglacial falling stage system tract. It is representative of a deglaciation sequence in areas previously covered by ice during glacial periods (i.e. medium to high latitude domains). Diagnostic criteria are provided to identify such a deglacial falling stage system tract in the geological record, which may aid identification of previously unknown glacial cycles.