Holocene and Pleistocene fringing reef growth and the role of accommodation space and exposure to waves and currents (Bora Bora,Society Islands,French Polynesia)

Holocene fringing reef development around Bora Bora is controlled by variations in accommodation space (as a function of sea‐level and antecedent topography) and exposure to waves and currents. Subsidence ranged from 0 to 0·11 m kyr^?1, and did not create significant accommodation space. A windward fringing reef started to grow 8·7 kyr bp , retrograded towards the coast over a Pleistocene fringing reef until ca 6·0 kyr bp , and then prograded towards the lagoon after sea‐level had reached its present level. The retrograding portion of the reef is dominated by corals, calcareous algae and microbialite frameworks; the prograding portion is largely detrital. The reef is up to 13·5 m thick and accreted vertically with an average rate of 3·12 m kyr^?1. Lateral growth amounts to 13·3 m kyr^?1. Reef corals are dominated by an inner Pocillopora assemblage and an outer Acropora assemblage. Both assemblages comprise thick crusts of coralline algae. Palaeobathymetry suggests deposition in 0 to 10 m depth. An underlying Pleistocene fringing reef formed during the sea‐level highstand of Marine Isotope Stage 5e, and is also characterized by the occurrence of corals, coralline algal crusts and microbialites. A previously investigated, leeward fringing reef started to form contemporaneously (8·78 kyr bp ), but is thicker (up to 20 m) and solely prograded throughout the Holocene. A shallow Pocillopora assemblage and a deeper water Montipora assemblage were identified, but detrital facies dominate. At the Holocene reef base, only basalt was recovered. The Holocene windward–leeward differences are a consequence of less accommodation space on the eastern island side that eventually led to a more complex reef architecture. As a result of higher rates of exposure and flushing, the reef framework on the windward island side is more abundant and experienced stronger cementation. In the Pleistocene, the environmental conditions on the leeward island side were presumably unfavourable for fringing reef growth.     

Beach erosion under rising sea‐level modulated by coastal geomorphology and sediment availability on carbonate reef‐fringed island coasts

This study addresses gaps in understanding the relative roles of sea‐level change, coastal geomorphology and sediment availability in driving beach erosion at the scale of individual beaches. Patterns of historical shoreline change are examined for spatial relationships to geomorphology and for temporal relationships to late‐Holocene and modern sea‐level change. The study area shoreline on the north‐east coast of Oahu, Hawaii, is characterized by a series of kilometre‐long beaches with repeated headland‐embayed morphology fronted by a carbonate fringing reef. The beaches are the seaward edge of a carbonate sand‐rich coastal strand plain, a common morphological setting in tectonically stable tropical island coasts. Multiple lines of geological evidence indicate that the strand plain prograded atop a fringing reef platform during a period of late‐Holocene sea‐level fall. Analysis of historical shoreline changes indicates an overall trend of erosion (shoreline recession) along headland sections of beach and an overall trend of stable to accreting beaches along adjoining embayed sections. Eighty‐eight per cent of headland beaches eroded over the past century at an average rate of ?0·12 ± 0·03 m yr^?1. In contrast, 56% of embayed beaches accreted at an average rate of 0·04 ± 0·03 m yr^?1. Given over a century of global (and local) sea‐level rise, the data indicate that embayed beaches are showing remarkable resiliency. The pattern of headland beach erosion and stable to accreting embayments suggests a shift from accretion to erosion particular to the headland beaches with the initiation of modern sea‐level rise. These results emphasize the need to account for localized variations in beach erosion related to geomorphology and alongshore sediment transport in attempting to forecast future shoreline change under increasing sea‐level rise.     

Aggradation and carbonate accumulation of Holocene Norwegian cold‐water coral reefs

Cold‐water coral ecosystems present common carbonate factories along the Atlantic continental margins, where they can form large reef structures. There is increasing knowledge on their ecology, molecular genetics, environmental controls and threats available. However, information on their carbo‐nate production and accumulation is still very limited, even though this information is essential for their evaluation as carbonate sinks. The aim of this study is to provide high‐resolution reef aggradation and carbonate accumulation rates for Norwegian cold‐water coral reefs from various settings (sunds, inner shelf and shelf margin). Furthermore, it introduces a new approach for the evaluation of the cold‐water coral preservation within cold‐water coral deposits by computed tomography analysis. This approach allows the differentiation of various kinds of cold‐water coral deposits by their macrofossil clast size and orientation signature. The obtained results suggest that preservation of cold‐water coral frameworks in living position is favoured by high reef aggradation rates, while preservation of coral rubble prevails by moderate aggradation rates. A high degree of macrofossil fragmentation indicates condensed intervals or unconformities. The observed aggradation rates with up to 1500 cm kyr^?1 exhibit the highest rates from cold‐water coral reefs so far. Reef aggradation within the studied cores was restricted to the Early and Late Holocene. Available datings of Norwegian cold‐water corals support this age pattern for other fjords while, on the shelf, cold‐water coral ages are reported additionally from the early Middle Holocene. The obtained mean carbonate accumulation rates of up to 103 g cm^?2 kyr^?1 exceed previous estimates of cold‐water coral reefs by a factor of two to three and by almost one order of magnitude to adjacent sedimentary environments (shelf, slope and deep sea). Only fjord basins locally exhibit carbonate accumulation rates in the range of the cold‐water coral reefs. Furthermore, cold‐water coral reef carbonate accumulation rates are in the range of tropical reef carbonate accumulation rates. These results clearly suggest the importance of cold‐water coral reefs as local, maybe regional to global, carbonate sinks.     

Contradicting Barrier Reef relationships for Darwin’s Evolution of reef types

The Darwinian progressive subsidence model for the evolution of fringing reefs, barrier reefs and atolls has been generally accepted following the indisputable proof of subsidence provided by drilling results in the Pacific. Nonetheless, there are data that do not fit the expectations of the model, such as the similar lagoon depths of barrier reefs and atolls as opposed to the subsidence theory’s implicit prediction that atolls should have significantly greater depths. In contrast, a great deal of evidence supports the influence of meteoric solution on barrier reef morphology. For example, the maximum lagoon depth of 56 modern barrier reefs is statistically correlated with the lagoon catchment area for modern annual rainfall. These modern rainfall patterns would seem to be a reasonable proxy for relative geographic differences in glacial lowstand rainfall, even though the absolute amounts of such rainfall are unknown. The correlation therefore suggests the importance of Pleistocene subaerial solution in contributing to barrier reef morphology. Further support for antecedent influence occurs in the form of barrier reef passes in which the depth of the reef pass is correlated with onshore drainage volumes. On a larger scale, the Cook Island of Mangaia provides evidence that solution can produce barrier reef morphology independent of reef development. In contrast, there are no examples of the subsidence-predicted lagoon transition of fringing reefs to barrier reefs to atolls. Moreover, the common occurrence of fringing reefs within barrier reefs negates subsidence as a causal factor in their ‘presumed progressive evolutionary development. Consequently, the evidence to date suggests that a solution morphology template has been accentuated by reef construction to produce the diagnostic barrier reef morphology we see today. The importance of subsidence would seem to be in accounting for the overall thickness of the resulting carbonate caps of oceanic examples and in contributing to lagoon depth variation among the larger continental entities.

---

     

Late Pliocene to Holocene platform evolution in northern Belize, and comparison with coeval deposits in southern Belize and the Bahamas

Lithostratigraphy, depositional facies architecture, and diagenesis of upper Pliocene to Holocene carbonates in northern Belize are evaluated based on a ca 290 m, continuous section of samples from a well drilled on Ambergris Caye that can be linked directly to outcrops of Pleistocene limestone, and of overlying Holocene sediments. Upper Pliocene outer‐ramp deposits are overlain unconformably by Pleistocene and Holocene reef‐rimmed platforms devoid of lowstand siliciclastics. Tectonism controlled the location of the oldest Pleistocene platform margin and coralgal barrier reef, and periodically affected deposition in the Holocene. A shallow, flat‐topped, mostly aggradational platform was maintained in the Holocene by alternating periods of highstand barrier‐reef growth and lowstand karstification, differential subsidence, and the low magnitude of accommodation space increases during highstands. Facies in Pleistocene rocks to the lee of the barrier reef include: (i) outer‐shelf coralgal sands with scattered coral patch reefs; (ii) a shoal–water transition zone comprising nearshore skeletal and oolitic sands amidst scattered islands and tidal flats; and (iii) micritic inner‐shelf deposits. Four glacio‐eustatically forced sequences are recognized in the Pleistocene section, and component subtidal cycles probably include forced cycles and autocycles. Excluding oolites, Holocene facies are similar to those in the Pleistocene and include mud‐mounds, foraminiferal sand shoals in the inner shelf, and within the interiors of Ambergris and surrounding cayes, mangrove swamps, shallow lagoons, and tidal and sea‐marginal flats. Meteoric diagenesis of Pliocene and Pleistocene rocks is indicated by variable degrees of mineralogic stabilization, generally depleted whole‐rock δ¹⁸O and δ¹³C values, and meniscus and whisker‐crystal cements. Differences in the mineralogy and geochemistry of the Pliocene and Pleistocene rocks are attributed to variable extent of meteoric alteration. Dolomitization in the Pliocene carbonates may have begun syndepositionally and continued into the marine shallow‐burial environment. Positive dolomite δ¹⁸O and δ¹³C values suggest precipitation from circulating, near‐normal marine fluids that probably were modified somewhat by methanogenesis. Sedimentologic and diagenetic attributes of the Pliocene–Pleistocene rocks in the study area are similar to those in the Bahamas with which they share a common history of sea‐level fluctuations and climate change.     

Mixed carbonates and siliciclastics in the Quaternary of southern Belize: Pleistocene turning points in reef development controlled by sea‐level change

The Belize barrier and atoll reefs represent one of the largest reef structures in the Atlantic Ocean. The southern shelf of Belize is a classic location of a modern mixed carbonate–siliciclastic system. Whereas knowledge of the Holocene deposits in the area is extensive, data on the Pleistocene system are fragmentary. Open questions include: (i) the nature of the reef foundations (carbonate versus siliciclastics); (ii) the ages of the deposits including the initiation of the barrier reef; and (iii) the response of the mixed system to sea‐level fluctuations. The results of a study of borings on the southern Belize shelf are presented here. Six, up to 105 m long borings were made to better understand the history of this important mixed system. Uranium‐series dating in the Pleistocene was not possible because of diagenetic alteration; however, lithostratigraphy, strontium isotopes and calcareous nannofossil biostratigraphy were used to constrain stratigraphic ages. Results support the contention that the Quaternary development in Belize was quite similar to that of other major barrier reefs such as the Florida Reef Tract and, further afield, the Great Barrier and the New Caledonian Barrier Reefs. All of these barrier reefs are mixed carbonate–siliciclastic systems and significant reef growth only began after the onset of high‐amplitude, eccentricity‐controlled sea‐level changes and as late as during the exceptionally long and warm marine isotope stage 11, some 400 ka. In Belize, Early Pleistocene sections at bases of borings include mollusc‐rich wackestones, rare coral packstones and marls, which were deposited under low to moderate energy conditions in a ramp setting before ca 900 ka, during the high sea‐levels of marine isotope stage 25 and possibly earlier (marine isotope stage 31 or 37). The Belize shelf was subaerially exposed for most of the mid‐Pleistocene and was dominated by siliciclastic sedimentation, possibly during marine isotope stages 24 to 12 when highstands were comparatively low. Continuous reefs at the shelf margin were developing during highstands. In the Late Pleistocene, beginning with the long and high highstand of marine isotope stage 11 (some 400 ka), the southern shelf was flooded entirely and carbonates started to dominate once more. Reefs developed on top of siliciclastic deposits on the shelf. A continuous barrier reef came into existence and largely developed on top of carbonates at the shelf margin. During Late Pleistocene lowstands, siliciclastics presumably no longer reached the shelf margin because of the topographic high of the barrier reef platform. The Quaternary Belize example may serve as a model for reconstructing ancient mixed systems in icehouse worlds, however, any extrapolations are limited by the fact that fast‐growing Scleractinian reef‐builders had not yet evolved in the Palaeozoic.     

Significance of shallow core transects for reef models and sea‐level curves,Heron Reef,Great Barrier Reef

A sequence of shallow reef cores from Heron Reef, Great Barrier Reef, provides new insights into Holocene reef growth models. Isochron analysis of a leeward core transect suggests that the north‐western end of Heron Reef reached current sea‐level by ca 6·5 kyr bp and then prograded leeward at a rate of ca 19·6 m/kyr between 5·1 kyr and 4·1 kyr bp (pre‐1950) to the present reef margin. A single short core on the opposing margin of the reef is consistent with greater and more recent progradation there. Further to the east, one windward core reached modern sea‐level by ca 6·3 kyr bp , suggesting near ‘keep‐up’ behaviour at that location, but the opposing leeward margin behind the lagoon reached sea‐level much more recently. Hence, Heron Reef exhibited significantly different reef growth behaviour on different parts of the same margin. Mean reef accretion rates calculated from within 20 m of one another in the leeward core transect varied between ca 2·9 m and 4·7 m/kyr depending on relative position in the prograding wedge. These cores serve as a warning regarding the use of isolated cores to inform reef growth rates because apparent aggradation at any given location on a reef varies depending on its location relative to a prograding margin. Only transects of closely spaced cores can document reef behaviour adequately so as to inform reef growth models and sea‐level curves. The cores also emphasize potential problems in U‐series dates for corals within a shallow (ca 1·5 m) zone beneath the reef flat. Apparent age inversions restricted to that active diagenetic zone may reflect remobilization and concentration of Th in irregularly distributed microbialites or biofilms that were missed during sample vetting. Importantly, the Th‐containing contaminant causes ages to appear too old, rather than too young, as would be expected from younger cement.     

Postglacial growth history of a French Polynesian barrier reef tract, Tahiti, central Pacific

The internal structure and growth pattern of Tahiti reefs over the last 14 ka is reconstructed using sedimentological, morphological and palaeobiological data coupled with radiometric dates in drill cores through the modern barrier reef. Flooding of the volcaniclastic deposits or the karst surface of a Pleistocene reef started at ≈ 14 ka BP, and coral growth began shortly after inundation. The sequence in the Tahiti barrier-reef edge has formed predominantly through long-term keep-up growth controlled by stable environmental conditions, while the adjacent backreef deposits did not start to accumulate before sea-level stabilization, around 6 ka. The dominance of Porites communities and the coeval occurrence of branching gracile Lithophyllum in the lowermost part of the postglacial reef sequence (14–11 ka) suggest the prevalence of uniformly moderate- to low-energy conditions and/or growth in slightly deeper waters all over the drilled area during the early reef stages. During the last 11 ka, the reef frameworks developed in a high-energy environment, at maximum water depths of 5–6 m, and were dominated by an Acropora robusta/danai–Hydrolithon onkodes association; the local interlayering of other coralgal assemblages (dominated by tabular Acropora or domal Porites ) reflects distinct diversification stages, resulting either from the palaeotopographic control of the substrate or from slight and episodic environmental changes.     

Impact of environmental parameters on coral reef development and drowning: Forward modelling of the last deglacial reefs from Tahiti (French Polynesia; IODP Expedition #310)

The sedimentological and chronological analysis of the last deglacial reef sequences of Tahiti (French Polynesia), drilled during the Integrated Ocean Drilling Program Expedition 310, provide a high‐resolution data set allowing a well‐constrained forward modelling study. This study represents the first attempt to model in three dimensions the coral reef development of Tahiti during the last deglacial sea‐level rise (23 000 to 6000 cal yr bp ) using the software dionisos developed by IFP Energies nouvelles. It allows the testing of the reconstructed last deglacial sea‐level curve and the different environmental parameters (for example, wave energy and sediment fluxes) that could have influenced the reef development. These last deglacial reef sequences form two prominent ridges occurring seaward of the living barrier reef that consist of successive submerged reefs. These reefs have been prone to drowning because the window of maximum carbonate production rate is inhibited by high water turbidity (sediment supply from a nearby river), shallow depth of wave action and substrate availability. These factors, combined with rapid sea‐level rise, have driven the growth of retrograding reef pinnacles. Local factors (substratum nature, sediment supply and wave energy) were the main processes that induced the drowning of the inner ridge, whereas interplay of local and global factors (acceleration of the sea‐level rise) was responsible for the drowning of the outer ridge. This particular acceleration of sea‐level rise of 16 m between 14·6 ka and 14 ka bp corresponds to meltwater pulse 1A.     

Helium-uranium dating of corals from Middle Pleistocene Barbados reef tracts

By He-U dating of corals from elevated Pleistocene reef tracts on Barbados, we have extended back to the Middle Pleistocene the high sea stand chronology previously deduced by Th²³⁰-U dating. Six samples from the first major reef tract complex older than the 200,000-yr complex gave ages of 350,000 ± 25,000 yr B.P. Two corals from the crest of Second High Cliff, an unusually large escarpment occurring approximately midway in the terrace sequence, gave concordant ages of 480,000 and 500,000 yr. Unrecrystallized corals from older reefs gave ages ranging back to 650,000 yr.The results date episodes of high sea stands at 350,000 and 500,000 yr B.P.     

Large earthquakes kill coral reefs at the north-west Gulf of Aqaba

Down‐faulting at the north‐west margins of the Gulf of Aqaba is inferred to have triggered a catastrophic sedimentary event at 2.3 ka that killed the Elat fringing coral reef. Whereas segments of the Holocene reef were perfectly fossilized and preserved beneath a veneer of siliciclastic sediments, other segments were abraded, settled by nomads, and later re‐submerged under 4 m of water. Repeated damage triggered by down‐throwing earthquakes degenerate the fringing reefs of the north‐west end of the gulf. Conversely, on the north‐eastern and southern parts of the gulf, where earthquakes uplift the margins, modern reefs are thriving, attached to uplifted fossil reef terraces. Therefore, coastal subsidence moderates the development of fringing coral reefs during the late Holocene sea‐level stand still.     

台湾恒春半岛的隆起珊瑚礁台地

台湾本岛南端的恒春半岛,出露隆起珊瑚礁石灰岩和现代珊瑚礁海岸。隆起珊瑚礁石灰岩在地貌上的表现是多阶的台地。最高的公园面可达海拔300m,依次向下,是海拔约100～160m的笼仔埔面,海拔70～80m的埔顶面以及海拔10～20m的垦丁面。在恒春半岛的西侧,珊瑚礁台地面已经倾斜,因此高度的表现不同。ESR及¹⁴C定年表明,抬升的更新世珊瑚礁台地形成于0.5Ma B.P.前后及0.13Ma B.P.两时期;海拔10～20m的全新世珊瑚礁台地约形成于6 000a B.P.的时期。这些证据显示了地质时期里全球变迁的蛛丝马迹。     

Sea-level and reef accretion history of Marine Oxygen Isotope Stage 7 and late Stage 5 based on age and facies of submerged late Pleistocene reefs,Oahu, Hawaii

In situ Pleistocene reefs form a gently sloping nearshore terrace around the island of Oahu. TIMS Th–U ages of in situ corals indicate that most of the terrace is composed of reefal limestones correlating to Marine Oxygen Isotope Stage 7 (MIS 7, ~ 190–245 ka). The position of the in situ MIS 7 reef complex indicates that it formed during periods when local sea level was ~ 9 to 20 m below present sea level. Its extensiveness and geomorphic prominence as well as a paucity of emergent in situ MIS 7 reef-framework deposits on Oahu suggest that much of MIS 7 was characterized by regional sea levels below present. Later accretion along the seaward front of the terrace occurred during the latter part of MIS 5 (i.e., MIS 5a–5d, ~ 76–113 ka). The position of the late MIS 5 reefal limestones is consistent with formation during a period when local sea level was below present. The extensiveness of the submerged Pleistocene reefs around Oahu compared to the relative dearth of Holocene accretion is due to the fact that Pleistocene reefs had both more time and more accommodation space available for accretion than their Holocene counterparts.     

Microborer ichnocoenoses in Quaternary corals from New Caledonia: reconstructions of paleo-water depths and reef growth strategies in relation to environmental changes

Coral reef growth and development depend on several environmental factors, including tectonic and climatic parameters and local ecological drivers. Reef growth is especially sensitive to sea-level variations. Paleo-water depth reconstructions are essential tools used to determine reef growth patterns during different periods of reef growth. Assemblages of corals and/or coralline algae have been commonly used in such paleodepth reconstructions. This study shows that using microendolith ichnocoenoses can sometimes provide better accuracy than traditional coralgal analyses, particularly in the depth-range 0–10 m where coralgal assemblages usually show broad distribution ranges. Holocene and Pleistocene cores from two barrier reef sites on the west coast of Grande Terre in New Caledonia are examined here. Holocene reef development at these sites feature examples of microendolith ichnocoenoses that document rapid environmental changes and small sea-level variations of about 2–5 m in amplitude, and record these changes with more accuracy than coral and coralline algae assemblages which are highly dependant on the hydrodynamic energy of the setting. During the Pleistocene, which was less chronologically constrained, the microendolith ichnocoenoses also reflect paleo-water depths and reef-growth patterns at different periods of reef history.     

Aeolian sediment transport and deposition in a modern high‐latitude glacial marine environment

Aeolian sand and dust in polar regions are transported offshore over sea ice and released to the ocean during summer melt. This process has long been considered an important contributor to polar sea floor sedimentation and as a source of bioavailable iron that triggers vast phytoplankton blooms. Reported here are aeolian sediment dispersal patterns and accumulation rates varying between 0·2 g m^?2 yr^?1 and 55 g m^?2 yr^?1 over 3000 km² of sea ice in McMurdo Sound, south‐west Ross Sea, adjacent to the largest ice free area in Antarctica. Sediment distribution and the abundance of southern McMurdo Volcanic Group‐derived glass, show that most sediment originates from the McMurdo Ice Shelf and nearby coastal outcrops. Almost no sediment is derived from the extensive ice free areas of the McMurdo Dry Valleys due to winnowed surficial layers shielding sand‐sized and silt‐sized material from wind erosion and because of the imposing topographic barrier of the north‐south aligned piedmont glaciers. Southerly winds of intermediate strength (ca 20 m sec^?1) are primarily responsible for transporting sediment northwards and offshore. The results presented here indicate that sand‐sized sediment does not travel more than ca 5 km offshore, but very‐fine sand and silt grains can travel >100 km from source. For sites >10 km from the coast, the mass accumulation rate is relatively uniform (1·14 ± 0·57 g m^?2 yr^?1), three orders of magnitude above estimated global atmospheric dust values for the region. This uniformity represents a sea floor sedimentation rate of only 0·2 cm kyr^?1, well below the rates of >9 cm kyr^?1 reported for biogenic‐dominated sedimentation measured over much of the Ross Sea. These results show that, even for this region of high‐windblown sediment flux, aeolian processes are only a minor contributor to sea floor sedimentation, excepting areas proximal to coastal sources.     

Complex coastal change in response to autogenic basin infilling: An example from a sub‐tropical Holocene strandplain

Thick bay‐fill sequences that often culminate in strandplain development serve as important sedimentary archives of land–ocean interaction, although distinguishing between internal and external forcings is an ongoing challenge. This study employs sediment cores, ground‐penetrating radar surveys, radiocarbon dates, palaeogeographic reconstructions and hydrodynamic modelling to explore the role of autogenic processes – notably a reduction in wave energy in response to coastal embayment infilling – in coastal evolution and shoreline morphodynamics. Following a regional 2 to 4 m highstand at ca 5·8 ka, the 75 km² Tijucas Strandplain in southern Brazil built from fluvial sediments deposited into a semi‐enclosed bay. Holocene regressive deposits are underlain by fluvial sands and a Pleistocene transgressive–regressive sequence, and backed by a highstand barrier‐island. The strandplain is immediately underlain by 5 to 16 m of seaward‐thickening, fluvially derived, Holocene‐age, basin‐fill mud. Several trends are observed from the landward (oldest) to the seaward (youngest) sections of the strandplain: (i) the upper shoreface and foreshore become finer and thinner and shift from sand‐dominated to mud‐dominated; (ii) beachface slopes decrease from >11° to ca 7°; and (iii) progradation rates increase from 0·4 to 1·8 m yr^?1. Hydrodynamic modelling demonstrates a correlation between progressive shoaling of Tijucas Bay driven by sea‐level fall and sediment infilling and a decrease in onshore wave‐energy transport from 18 to 4 kW m^?1. The combination of allogenic (sediment supply, falling relative sea‐level and geology) and autogenic (decrease in wave energy due to bay shoaling) processes drove the development of a regressive system with characteristics that are rare, if not unique, in the Holocene and rock records. These findings demonstrate the complexities in architecture styles of highstand and regressive systems tracts. Furthermore, this article highlights the diverse internal and external processes and feedbacks responsible for the development of these intricate marginal marine sedimentary systems.     

High energy coralgal-stromatolite frameworks from Holocene reefs (Tahiti, French Polynesia)

Drill cores from Holocene reefs on Tahiti (French Polynesia) reveal a framework composed of massive branching acroporids encrusted by coralline algae associated with sessile vermetid gastropods and arborescent foraminifers. Laminated micritic crusts form coatings over coral branches or, more commonly, over related encrusting organisms throughout the cored reef sections; these crusts appear as a major structural and volumetric component of the reef framework. The microbial nature of these micritic crusts is inferred from their typical organic growth forms and geometry, the occurrence of microbial remains and stable isotope measurements. The reef communities accumulated at depths less than 5 m below mean sea level in a high energy environment throughout vertical growth from 7140 ± 170 yr bp to the present. The nature of the involved benthic communities, stable isotope data and high calcification rates of microbially encrusted corals strongly suggest that local environmental conditions have been optimal for reef development for the last 7000 years. The causes of the predominance of microbial communities over actual encrusters (red algae, foraminifers) remain problematic and could be related to short term fluctuations in ecological parameters. Microbial micritic crusts seemingly played a prominent role in protecting the coralgal colonies from bioeroders and grazers and, possibly, in strengthening the framework, due to rapid lithification. The record of similar microbial crusts in other Quaternary reef tracts suggests that microbial communities may have played a more prominent role in Quaternary reefs than presently recognized.     

Holocene reef sequences and geochemistry, Britomart Reef, central Great Barrier Reef, Australia

Holocene reef development was investigated by coring on Britomart Reef, a mid-shelf reef, 23 km long and 8 km wide situated 120 km north of Townsville in the central Great Barrier Reef (GBR). Two holes were drilled, Britomart 1 on a lagoon patch reef, and Britomart 2 on the windward reef crest. The Holocene reef (25·5 m) is the thickest yet recorded in the GBR and overlies an uneven substrate of weathered Pleistocene limestone. Mineralogical and geochemical analyses show that magnesian calcite and aragonite were converted to low Mg-calcite below the Holocene-Pleistocene disconformity. Corals above the interface have 7500–8500 ppm Sr, but 1650–1500 ppm just below it, decreasing to 400–800 ppm downwards. The intermediate Sr values could be due to partial replacement of aragonite by calcite or higher original Sr content in the corals. Three units are recognized in the Holocene: (1) coral boundstone unit, (2) coral framestone unit, and (3) coral rudstone unit. The coral boundstone unit forms the top 5 m of both cores and is algal-bound coral rubble similar to the present reef top. The coral framestone unit is composed of massive head corals Diploastrea heliopora and Porites sp., and is currently forming in patch reefs situated in the lagoon and along the reef front. The coral rudstone unit comprises coral rudstone and floatstone with unabraded, and unbound, coral clasts in muddy matrix. This matrix may be up to 30% sponge chips. Radiocarbon dating indicates the reef grew more rapidly under the lagoon than under the reef front from 7000 to 5000 yr BP. The rate of reef growth matched existing estimates of sea-level rise, but lagged approximately 1000 years (5–10 m) behind it. Most of the reef mass accumulated between 8500 and 5000 yr BP as a mound of debris, perhaps stabilized by seagrasses or algae. Accretion of the reef top in a windward direction between 5000 and 3000 yr BP created the present, steep reef-front profile.     

High‐resolution reconstruction of a coastal barrier system: impact of Holocene sea‐level change

This study presents a detailed reconstruction of the sedimentary effects of Holocene sea‐level rise on a modern coastal barrier system. Increasing concern over the evolution of coastal barrier systems due to future accelerated rates of sea‐level rise calls for a better understanding of coastal barrier response to sea‐level changes. The complex evolution and sequence stratigraphic framework of the investigated coastal barrier system is reconstructed using facies analysis, high‐resolution optically stimulated luminescence and radiocarbon dating. During the formation of the coastal barrier system starting 8 to 7 ka rapid relative sea‐level rise outpaced sediment accumulation. Not before rates of relative sea‐level rise had decreased to ca 2 mm yr^?1 did sediment accumulation outpace sea‐level rise. From ca 5·5 ka, rates of regionally averaged sediment accumulation increased to 4·3 mm yr^?1 and the back‐barrier basin was filled in. This increase in sediment accumulation resulted from retreat of the barrier island and probably also due to formation of a tidal inlet close to the study area. Continued transgression and shoreface retreat created a distinct hiatus and wave ravinement surface in the seaward part of the coastal barrier system before the barrier shoreline stabilized between 5·0 ka and 4·5 ka. Back‐barrier shoreline erosion due to sediment starvation in the back‐barrier basin was pronounced from 4·5 to 2·5 ka but, in the last 2·5 kyr, barrier sedimentation has kept up with and outpaced sea‐level. In the last 0·4 kyr the coastal barrier system has been prograding episodically. Sediment accumulation shows considerable variation, with periods of rapid sediment deposition and periods of non‐deposition or erosion resulting in a highly punctuated sediment record. The study demonstrates how core‐based facies interpretations supported by a high‐resolution chronology and a well‐documented sea‐level history allow identification of depositional environments, erosion surfaces and hiatuses within a very homogeneous stratigraphy, and allow a detailed temporal reconstruction of a coastal barrier system in relation to sea‐level rise and sediment supply.