Epigenetic dolomitization of the Přaídolí formation (Upper Silurian), the Barrandian basin,Czech Republic: implications for burial history of Lower Paleozoic strata

Stratabound epigenetic dolomite occurs in carbonate facies of the Barrandian basin (Silurian and Devonian), Czech Republic. The most intense dolomitization is developed in bioclastic calcarenites within the transition between micritic limestone and shaledominated Přídolí and Lochkov formations deposited on a carbonate slope. Medium-crystalline (100–400 μm), inclusion-rich, xenotopic matrix dolomite (δ ¹⁸O=−4.64 to −3.40‰ PDB;δ ¹³C=+1.05 to +1.85‰ PDB) which selectively replaced most of the bioclastic precursor is volumetrically the most important dolomite type. Coarse crystalline saddle dolomite (δ ¹⁸O=−8.04 to −5.14‰ PDB;δ ¹⁸C=+0.49 to +1.49 PDB) which precipitated in fractures and vugs within the matrix dolomite represents a later diagenetic dolomitization event. In some vugs, saddle dolomite coprecipitated with petroleum inclusion-rich authigenic quartz crystals and minor sulfides which, in turn, were post-dated by semisolid asphaltic bitumen. The interpretation of the dolomitization remains equivocal. Massive xenotopic dolomite, although generally characteristic of a deeper burial setting, may have been formed by a recrystallization of an earlier, possibly shallow burial dolomite. Deeper burial recrystallization by reactive basinal pore fluids that presumably migrated through the more permeable upper portion of the Přídolí sequence appears as a viable explanation for this dolomitization overprint. Saddle dolomite cement of the matrix dolomite is interpreted as the last dolomitization event that occurred during deep burial at the depth of the oil window zone. The presence of saddle dolomite, the fluid inclusion composition of associated quartz crystals, and vitrinite paleogeothermometry of adjacent sediments imply diagenetic burial temperatures as high as 160°C. Although high geothermal gradients in the past or the involvement of hydrothermally influenced basinal fluids can account for these elevated temperatures, burial heating beneath approximately 3-km-thick sedimentary overburden of presumably post-Givetian strata, no longer preserved in the basin, appears to be the most likely interpretation. This interpretaion may imply that the magnitude of post-Variscan erosion in the Barrandian area was substantially greater than previously thought.     

Isotopic constraints on growth conditions of multiphase calcite–pyrite–barite concretions in Carboniferous mudstones

Carbonate concretions in the Lower Carboniferous Caton Shale Formation contain diagenetic pyrite, calcite and barite in the concretion matrix or in different generations of septarian fissures. Pyrite was formed by sulphate reduction throughout the sediment before concretionary growth, then continued to form mainly in the concretion centres. The septarian calcites show a continuous isotopic trend from δ¹³C=?28·7‰ PDB and δ¹⁸O=?1·6‰ PDB through to δ¹³C=?6·9‰ PDB and δ¹⁸O=?14·6‰ PDB. This trend arises from (1) a carbonate source initially from sulphate reduction, to which was added increasing contributions of methanogenic carbonate; and (2) burial/temperature effects or the addition of isotopically light oxygen from meteoric water. The concretionary matrix carbonates must have at least partially predated the earliest septarian cements, and thus used the same carbonate sources. Consequently, their isotopic composition (δ¹³C=?12·0 to ?10·1‰ PDB and δ¹⁸O=?5·7 to ?5·6‰ PDB) can only result from mixing a carbonate cement derived from sulphate reduction with cements containing increasing proportions of carbonate from methanogenesis and, directly or indirectly, also from skeletal carbonate. Concretionary growth was therefore pervasive, with cements being added progressively throughout the concretion body during growth. The concretions contain barite in the concretion matrix and in septarian fissures. Barite in the earlier matrix phase has an isotopic composition (δ³⁴S=+24·8‰ CDT and δ¹⁸O=+16·4‰ SMOW), indicating formation from near‐surface, sulphate‐depleted porewaters. Barites in the later septarian phase have unusual isotopic compositions (δ³⁴S=+6 to +11‰ CDT and δ¹⁸O=+8 to +11‰ SMOW), which require the late addition of isotopically light sulphate to the porewaters, either from anoxic sulphide oxidation (using ferric iron) or from sulphate dissolved in meteoric water. Carbon isotope and biomarker data indicate that oil trapped within septarian fissures was derived from the maturation of kerogen in the enclosing sediments.     

Stable isotope evidence for the origin of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel

The oxygen isotope compositions of diagenetic carbonate minerals from the Lower Jurassic Inmar Formation, southern Israel, have been used to identify porewater types during diagenesis. Changes in porewater composition can be related to major geological events within southern Israel. In particular, saline brines played an important role in late (Pliocene-Pleistocene) dolomitization of these rocks. Diagenetic carbonates included early siderite (δ¹⁸O_SMOW=+24.4 to +26.5‰δ¹³C_PDB=?1.1 to +0.8‰), late dolomite, ferroan dolomite and ankerite (δ¹⁸O_SMOW=+18.4 to +25.8‰; δ¹³C_PDB=?2.1 to +0.2‰), and calcite (δ¹⁸O_SMOW=+21.3 to +32.6‰; δ¹³C_PDB=?4.2 to + 3.2‰). The petrographic and isotopic results suggest that siderite formed early in the diagenetic history at shallow depths. The dolomitic phases formed at greater depths late in diagenesis. Crystallization of secondary calcite spans early to late diagenesis, consistent with its large range in isotopic values. A strong negative correlation exists between burial depth (temperature) and the oxygen isotopic compositions of the dolomitic cements. In addition, the δ¹⁸O values of the dolomitic phases in the northern Negev and Judea Mountains are in isotopic equilibrium with present formation waters. This behaviour suggests that formation of secondary dolomite post-dates the tectonic activity responsible for the present relief of southern Israel (Upper Miocene to Pliocene) and that the dolomite crystallized from present formation waters. Such is not the case in the Central Negev. In that locality, present formation waters have much lower salinities and δ¹⁸O values, indicating invasion of freshwater, and are out of isotopic equilibrium with secondary dolomite. Recharge of the Inmar Formation by meteoric water in the Central Negev occurred in the Pleistocene, and halted formation of dolomite.     

塔深1井寒武系白云岩储层同位素流体地球化学示踪

通过对塔里木盆地沙雅隆起阿克库勒凸起东部塔深1井寒武系白云岩岩石学特征及成岩成因分析,影响塔深1井寒武系地层流体改变主要成岩有准同生期、埋藏期和后期热液改造期等.塔深1井寒武系白云岩及充填孔、洞、缝内方解石的氧、碳、锶同位素地球化学特征表明:准生期白云岩δ~(13)C_(PDB)值(0.9‰～1.8‰)偏正、δ~(18)C_(PDB)值(-10.1‰～-4.2‰)偏负反映准同生期泥微晶白云石成因属于高盐度的海水使得碳酸盐泥发生白云石化;埋藏期白云岩碳、氧随重结晶作用加强,白云岩晶粒由细向粗变化值随埋深增加,由于同位素分馏作用而偏负,δ~(18)C_(PDB)值(-10.02‰～-5.7‰)呈明显的下降,但δ~(13)C_(PDB)值(-1.4‰～0‰)组成变化不大;后期热液白云岩在热液作用下δ~(18)C_(PDB)值普遍低于-10‰(δ~(18)C_(PDB)/‰-13.1～-9.4,δ~(13)C_(PDB)/‰-2～-0.647);基质方解石δ~(18)C_(PDB)值为-10.1‰～-10.13‰,δ~(13)C_(PDB)值为-1.48‰～-1.62‰;充填孔洞缝粗-巨晶方解石δ~(18)C_(PDB)值为-10.89‰～-14.28‰,δ~(13)C_(PDB)值为-2‰～-3.09‰,反映准同生期→埋藏期→后期热液晶粒大小由泥微晶→细晶→中晶→粗晶氧碳同位素值逐渐变小偏负,据~(87)Sr/~(86)Sr(0.707 284～0.746 888)值均远高于现今海洋中海水的锶同位素组成(0.708)及围岩的锶同位素(0.707 284),说明鞍形白云石以及方解石结晶时的孔隙流体不是残余在岩石孔隙中的同生期海水,而是外来的富含锶的流体,也就是深部热液流体.渗透回流白云石化、埋藏白云石化和高温热液白云石化等特征表明白云岩形成于超盐度、埋藏和高温热液等3种不同的环境,因此影响储层形成与分布,从而影响对白云岩的勘探.     

Diagenesis and reservoir quality of the Aldebaran Sandstone, Denison Trough, east-central Queensland, Australia

The Lower Permian Aldebaran Sandstone is the principal hydrocarbon reservoir in the Denison Trough (Bowen Basin), east-central Queensland, Australia. It accumulated in a wide range of fluvio-deltaic and nearshore marine environments. Detailed petrological study of the unit by thin section, X-ray diffraction, scanning electron microscopy, electron microprobe and isotopic analysis reveals a complex diagenetic history which can be directly related to depositional environment, initial composition and burial-temperature history. Early diagenetic effects included the precipitation of pyrite, siderite and illite-smectite rims (δ¹⁸O (SMOW) =+8.9 to + 11.3‰). Deep burial effects included physico-chemical compaction and the formation of quartz overgrowths, siderite (δ¹³C(PDB) =?34.0 to + 11.5‰, δ¹⁸O =?0.7 to +22.7‰), illite/illite-smectite and ankerite (δ¹³C=?9.3 to ?4.9‰) δ¹⁸O=+ 7.6 to + 14.4‰). Involved fluids were in part ‘connate meteoric’ water derived from compaction of the underlying freshwater Reids Dome beds. Important post-maximum burial effects, controlled by deep meteoric influx from the surface, were ankerite and labile grain dissolution and formation of kaolinite (δ¹⁸O=+7.8 to +8.9‰, δD=?115 to ?99‰), calcite (δ¹³C=?9.5 to +0.9‰, δ¹⁸O=+9.0 to +20.0‰) and dawsonite (δ¹³C=?4.0 to +2.3‰, δ¹⁸O=+9.8 to +19.8‰), the formation of dawsonite reflecting eventual stagnation of the aquifer. Entrapment of contained hydrocarbons was a relatively recent event which may be continuing today. Reservoir quality varies from marginal to good in the west to poor in the east, with predictable trends being directly linked to depositional environment and diagenesis.     

Origin and modification of Cambrian dolomites (Red Heart Dolomite and Arthur Creek Formation), Georgina Basin, central Australia

The Early to Middle Cambrian Red Heart Dolomite and lower Arthur Creek Formation of the southern portion of the Georgina Basin, Australia, is an entirely dolomitized succession of shallow-water evaporitic mudflat and deeper-water subtidal lithologies. Three types of dolomite have been identified and are interpreted as: (1) syndepositional dolomite; (2) regional replacement dolomite; and (3) void-filling dolomite (cement). Syndepositional dolomite, derived from saline pore fluids developed in a sabkha environment, is a minor dolomite type with very fine crystal mosaics and has a mottled, non-zoned cathodoluminescence. The widespread regional replacement dolomite ranges from fine- to medium-crystalline forming mainly planar-s and non-planar-a crystal mosaics, and displays blotchy, mottled, non-zoned cathodoluminescence. Void-filling dolomite commonly forms planar-s to planar-e, medium to very coarse crystal mosaics. Rare non-planar-c, very coarsely crystalline saddle dolomite also exists. Void-filling dolomite has a successively zoned cathodoluminescence pattern from non-, to brightly, to dully luminescent. Geochemically, the syndepositional dolomite has δ¹⁸O (PDB) values ranging between ? 5.3 and ? 8.6%_o. Regional replacement dolomites exhibit a wide range of δ¹⁸O values from ? 3.3 to ? 10.9%_o whereas void-filling dolomite has δ¹⁸O values ranging from ? 10.8 to ? 14.3%_o. All three dolomite types have similar δ¹³C (PDB) values, in the range between +1.7 and ?1.7%_o. Three initial dolomitization episodes are interpreted: (1) a sabkha stage, forming the syndepositional dolomite and dolomitizing the evaporitic mudflat lithologies; (2) a brine-reflux stage, replacing the subtidal lithologies; and (3) a burial stage, forming the void-filling dolomite type. Final dolomite stabilization occurred during burial, at elevated temperatures, in the presence of basinal fluids, resulting in progressive recrystallization and stabilization of the earlier-formed syndepositional and replacement dolomites. Both textural and geochemical evolution should be taken into account when studying the origin of dolomites, based on their present geochemical composition. Sulphates are represented by very fine-crystalline syndepositional anhydrite in association with the syndepositional dolomite, and coarse to very coarse anhydrite cement. Evaportic mudflat (sabkha) and burial environments are inferred for the origin of the former and the latter anhydrite types, respectively. Evaporite dissolution breccias, indicative of the former presence of evaporites, are common throughout the succession.     

塔里木盆地塔北、塔中地区寒武系—奥陶系碳酸盐岩中鞍形白云石胶结物特征

通过对塔里木盆地中、北部地区寒武系—奥陶系碳酸盐岩的研究,发现鞍形白云石胶结物发育比较普遍,常见于孔洞或裂缝之中,乳白色,晶体粗大,晶面弯曲或呈阶梯状,镜下波状消光,晶体内部常见微裂缝,常与热液矿物共生。本文对28个鞍形白云石样品进行了碳、氧、锶同位素测试,结果显示鞍形白云石的δ~(13)C和δ~(18)O值分别介于-2.446‰～0.686‰和-9.101‰～-5.117‰之间,~(87)Sr/~(86)Sr值介于0.708 6～0.710 2之间;流体包裹体测温分析表明,鞍形白云石中气—液两相包裹体的均一温度(T_h)介于121～159.5℃之间,但集中分布在135～145℃之间;根据最后冰融点温度(T_m)求得的白云岩化流体盐度介于21.3%～23.1%之间。这些数据表明,该类型白云石形成于热卤水(盐度是海水的5～8倍)之中。塔里木盆地鞍形白云石与世界范围内其它盆地的鞍形白云石的碳、氧同位素特征基本相似,但其~(87)Sr/~(86)Sr值相对偏低。导致这一现象的原因可能是鞍形白云石形成于来自深部的岩浆热液流体之中,这些流体伴随岩浆侵位或通过切穿基底的深大断裂及其与之相连的次级断裂系统从深部直接进入碳酸盐岩地层中,未经过碎屑岩输导层的长时间运移,所以导致其中形成的鞍形白云石~(87)Sr/~(86)Sr值偏低。     

塔里木盆地寒武-奥陶系白云岩储层类型与分布特征

塔里木盆地寒武-奥陶系白云岩是台盆区最重要的储层之一,发育4种类型:①潮坪白云岩。以含膏泥晶白云岩为主,石膏溶孔及白云岩砾间孔发育,发育于潮间-潮上坪蒸发环境。白云石表现为MgO-CaO呈线性正相关、低Mg/Ca值及高∑REE值、锶同位素值分布在0.7085～0.7100之间,略高于同期海水值0.7090、阴极发光不发光或暗色光。储层分布主要受沉积相控制,发育于中下寒武统地层;②蒸发台地白云岩。以藻丘及颗粒灰岩选择性白云石化为特征,发育铸模孔、膏溶孔和残留粒间孔,白云石Mg/Ca值变化范围大、δ13C、δ18O值相对偏正、分别大于2‰和-4‰、阴极发光发较亮红光。储层主要发育于台内靠近台缘一侧;③埋藏白云岩。发育细晶、中晶及粗晶白云岩,以晶间孔及晶间溶孔为主,δ18O值偏负在-5‰～-10‰(PDB)之间,87Sr/86Sr值相对较大,为0.7090～0.7110,阴极发光以发暗棕褐色、紫色光为主。埋藏白云岩储层发育主要受成岩相控制,但也表现出与沉积相具有相关性,这是因为物性好的台缘、台内礁滩体及有裂缝沟通构成的开放体系更有利于埋藏白云石化作用发生;④热液白云岩。以受热液改造的结晶白云岩为特征,往往伴生热液矿物,白云石δ18O值异常偏负、一般小于-9‰(PDB)、阴极发光多发明亮红光、稀土元素标准化配分曲线中Eu出现正异常、出现高于地层背景值的异常高温包裹体;主要发育在具有上覆隔挡层的不整合面之下地层及大断裂发育带附近。上述四类白云岩在规模与分布上有不同,但都可预测。埋藏和热液白云岩规模较大,受原始沉积相带和成岩流体来源双重约束。潮坪和蒸发台地白云岩规模可变性较大,可由沉积环境重建,结合成岩相研究预测评价。     

Petrographic and Geochemicial Characteristics of the K?z?loren Formation (Upper Triassic-Lower Jurassic) in the Akp?nar (Konya, Turkey) Area

This paper describes the occurrence of dolomite and the mechanism of dolomitization of the Upper Triassic-Lower Jurassic K?z?loren Formation in the autochthonous Bolkardag? unit of the middle Taurus Mountains in south western Turkey. Dolomites were analyzed for geochemical, isotopic and crystallographic variation. Dolomites occur as a replacement of precursor carbonate and cement. The dolomite crystals range from <10 to ~1000 μm existing as both replacements and cements. Sr concentrations range between 84 and 156 ppm, and the molar Sr/Ca ratios of dolomitizing fluids are estimated to range between 0.0066 to 0.013 ratios. Dolomites are Ca-rich (with average CaCO3 and MgCO3 equal to 56.43 and 43.57 mol%, respectively) and they are non-stoichiometric, with an average Sr=116 ppm, Na=286 ppm, Mn=81 ppm, Fe=1329 ppm, and δ18O and δ13C ranges from –0.6‰ to –6.1‰ Pee Dee Belemnite [PDB], and +1.2 to +3.9‰ PDB. The North American Shale Composition [NASC]-normalized rare earth element (REE) values of the both limestone and dolomite sample groups show very similar REE patterns characterized by small positive Eu (mean=1.32 and mean=1.42, respectively) and slightly or considerably negative Ce (mean=0.61 and mean=0.72, respectively) anomalies and a clear depletion in all REE species. The K?z?loren Formation dolomites have been formed as early diagenetic from mixing zone fluids at the tidal-subtidal environment and at the late diagenetic from basinal brines at the shallow-deep burial depths.     

Petrography and geochemistry of early-stage, fine- and medium-crystalline dolomites in the Middle Devonian Presqu'ile Barrier at Pine Point, Canada

The petrography and geochemistry of fine- and medium-crystalline dolomites of the Middle Devonian Presqu’ile barrier at Pine Point (Western Canada Sedimentary Basin) are different from those of previously published coarse-crystalline and saddle dolomites that are associated with late-stage hydrothermal fluids. Fine-crystalline dolomite consists of subhedral to euhedral crystals, ranging from 5 to 25 μm (mean 8 μm). The dolomite interbedded with evaporitic anhydrites that occur in the back-barrier facies in the Elk Point Basin. Fine-crystalline dolomite has δ¹⁸Ο values between ?1·6 to –3·8‰ PDB and ⁸⁷Sr/⁸⁶Sr ratios from 0·7079–0·7081, consistent with derivation from Middle Devonian seawater. Its Sr concentrations (55–225 p.p.m., mean 105 p.p.m.) follow a similar trend to modern Little Bahama seawater dolomites. Its rare earth element (REE) patterns are similar to those of the limestone precursors. These data suggest that this fine-crystalline dolomite formed from Middle Devonian seawater at or just below the sea floor. Medium-crystalline dolomite in the Presqu’ile barrier is composed of anhedral to subhedral crystals (150–250 μm, mean 200 μm), some of which have clear rims toward the pore centres. This dolomite occurs mostly in the southern lower part of the barrier. Medium-crystalline dolomite has δ¹⁸O values between ?3·7 to ?9·4‰ PDB (mean ?5·9‰ PDB) and ⁸⁷Sr/⁸⁶Sr ratios from 0·7081–0·7087 (mean 0·7084); Sr concentrations from 30 to 79 p.p.m. (mean 50 p.p.m.) and Mn content from 50 to 253 p.p.m. (mean 161 p.p.m.); and negative Ce anomalies compared with those of marine limestones. The medium-crystalline dolomite may have formed either (1) during shallow burial at slightly elevated temperatures (35–40 °C) from fluids derived from burial compaction, or, more likely (2) soon after deposition of the precursor sediments by Middle Devonian seawater derived from the Elk Point Basin. These results indicate that dolomitization in the Middle Devonian Presqu’ile barrier occurred in at least two stages during evolution of the Western Canada Sedimentary Basin. The geochemistry of earlier formed dolomites may have been modified if the earlier formed dolomites were porous and permeable and water/rock ratios were large during neomorphism.     

Fibrous calcite from the Ordovician of Tennessee: preservation of marine oxygen isotopic composition and its implications

Three categories of fibrous calcite from early to middle Caradoc platform-marginal buildups in east Tennessee can be delineated using cathodoluminescent microscopy, minor element chemistry and stable C-O isotopic composition. Bright luminescent fibrous cement has elevated Mn (>1000 p.p.m.), negative δ¹³C and intermediate δ¹⁸O values relative to other types of fibrous calcite. This cement reflects fibrous calcite that interacted with reducing Mn-rich fluids. Dully luminescent fibrous cement has elevated Fe (>400 p.p.m.), positive δ¹³C and negative δ¹⁸O values relative to other fibrous cements. This cement was stabilized by burial fluids. Nonluminescent fibrous cement has low Mn and Fe (generally below 400 p.p.m.) and positive δ¹³C and δ¹⁸O values relative to other types of fibrous calcite. The latter cement is interpreted to be the best material for determining the isotopic composition of calcite precipitated in equilibrium with early to middle Caradoc seawater, which is δ¹³C=1% PDB and δ¹⁸O=?4 to ?5‰ PDB. Results from this study and Ashgillian brachiopods indicate that the average δ¹⁸O composition of the Ordovician ocean, during nonglacial periods, was probably never more negative than ?3‰ SMOW. Assuming an Ordovician seawater δ¹⁸O value of ?1‰ SMOW, Holston Formation fibrous cements would have precipitated at temperatures between 27 and 36 °C, which is near the upper temperature limit for metazoans. A seawater δ¹⁸O value of ?2‰ SMOW yields temperatures ranging from 23 to 31 °C, while a ?3‰ SMOW value yields temperatures of 18–26 °C.     

The diagenesis of the late Dinantian Derbyshire-East Midland carbonate shelf, central England

Carbonate cements in late Dinantian (Asbian and Brigantian) limestones of the Derbyshire carbonate platform record a diagenetic history starting with early vadose meteoric cementation and finishing with burial and localized mineral and oil emplacement. The sequence is documented using cement petrography, cathodoluminescence, trace element geochemistry and C and O isotopes. The earliest cements (Pre-Zone 1) are locally developed non-luminescent brown sparry calcite below intrastratal palaeokarsts and calcretes. They contain negligible Fe, Mn and Sr but up to 1000 ppm Mg. Their isotopic compositions centre around δ¹⁸O =?8.5‰, δ¹³C=?5.0‰. Calcretes contain less ¹³C. Subsequent cements are widespread as inclusion-free, low-Mg, low-Fe crinoid overgrowths and are described as having a‘dead-bright-dull’cathodoluminescence. The‘dead’cements (Zone 1) are mostly non-luminescent but contain dissolution hiatuses overlain by finely detailed bright subzones that correlate over several kilometres. Across‘dead'/bright subzones there is a clear trend in Mg (500–900 ppm), Mn (100–450 ppm) and Fe (80-230 ppm). Zone 1 cements have isotopic compositions centred around δ¹⁸O =?8.0‰ and δ¹³C=?2.5‰. Zone 2 cement is bright, thin and complexly subzoned. It is geochemically similar to bright subzones of Zone 1 cements. Dull Zone 3 cement pre-dates pressure dissolution and fills 70% or more of the pore space. It generally contains little Mn, Fe and Sr but can have more than 1000 ppm Mg, increasing stratigraphically upwards. The δ¹⁸O compositions range from ?5.5 to ?15‰ and the δ¹³C range is ?1 to + 3.2^0/00. Zone 4 fills veins and stylolite seams in addition to pores. It is synchronous with Pb, Ba, F ore mineralization and oil migration. Zone 4 is ferroan with around 500 ppm Fe, up to 2500 ppm Mg and up to 1500 ppm Mn. Isotopic compositions range widely; δ¹⁵O =?2.7 to ?9‰ and δ¹³C=?3.8 to+2.50‰. Unaltered marine brachiopods suggest a Dinantian seawater composition around δ¹⁵O = 0‰ (SMOW), but vital isotopic effects probably mask the original δ¹³C (PDB) value. Pre-Zone 1 calcites are meteoric vadose cements with light soil-derived δ¹³C and light meteoric δ¹⁸O. An unusually fractionated‘pluvial’δ¹⁵O(SMOW) value of around — 6‰ is indicated for local Dinantian meteoric water. Calcrete δ¹⁸O values are heavier through evaporation. Zone 1 textures and geochemistry indicate a meteoric phreatic environment. Fe and Mn trends in the bright subzones indicate stagnation, and precipitation occurred in increments from widespread cyclically developed shallow meteoric water bodies. Meteoric alteration of the rock body was pervasive by the end of Zone 1 with a general resetting of isotopic values. Zone 3 is volumetrically important and external sources of water and carbonate are required. Emplacement was during the Namurian-early Westphalian by meteoric water sourced at a karst landscape on the uplifted eastern edge of the Derbyshire-East Midland shelf. The light δ¹⁸O values mainly reflect burial temperatures and an unusually high local heat flow, but an input of highly fractionated hinterland-derived meteoric water at the unconformity is also likely. Relatively heavy δ¹³C values reflect the less-altered state of the source carbonate and aquifer. Zone 4 is partly vein fed and spans burial down to 2000 m and the onset of tectonism. Light organic-matter-derived δ¹³C and heavy δ¹⁸O values suggest basin-derived formation water. Combined with textural evidence of geopressures, this relates to local high-temperature ore mineralization and oil migration. Low water-to-rock ratios with host-rock buffering probably affected the final isotopic compositions of Zone 4, masking extremes both of temperature and organic-matter-derived CO₂.     

渤海湾盆地黄河口凹陷沙河街组白云岩成因机理

为了研究渤海湾盆地黄河口凹陷沙河街组白云岩成因机理,通过岩心观察、薄片鉴定、阴极发光、X衍射、扫描电镜、背散射、碳氧同位素等方法,分析白云石岩石学、形貌学和同位素地球化学特征.结果表明,白云岩呈黄棕色,发育大量溶蚀孔和高岭石、燧石等矿物,δ13C值为-0.50‰~4.58‰,δ18O值为-14.58‰~-2.19‰,总体具有δ13C低正值,δ18O负值的特点.泥晶白云石,由微米级球状白云石和白云石化蓝细菌组成,亚微米级孔隙发育,见薄片状细菌丝和草莓状黄铁矿;纤维状白云石环边胶结物充填在溶蚀孔洞或围绕颗粒表面生长;菱形白云石,漂浮状分散在孔隙中.准同生期,硫酸盐还原菌的催化作用形成球形白云石;随后,受大气淡水淋滤,在湖底成岩环境微生物影响下形成纤维状白云石环边胶结物;浅埋藏期,由于埋藏白云岩化形成菱形白云石.这为古老湖相白云岩微生物成因提供具体实例,且对该地区勘探提供参考.      

Multistage hydrothermal dolomites in the Middle Devonian (Givetian) carbonates from the Guilin area, South China

Pervasive dolomites occur preferentially in the stromatoporoid biostromal (or reefal) facies in the basal Devonian (Givetian) carbonate rocks in the Guilin area, South China. The amount of dolomites, however, decreases sharply in the overlying Frasnian carbonate rocks. Dolostones are dominated by replacement dolomites with minor dolomite cements. Replacement dolomites include: (1) fine to medium, planar‐e floating dolomite rhombs (Rd1); (2) medium to coarse, planar‐s patchy/mosaic dolomites (Rd2); and (3) medium to very coarse non‐planar anhedral mosaic dolomites (Rd3). They post‐date early submarine cements and overlap with stylolites. Two types of dolomite cements were identified: planar coarse euhedral dolomite cements (Cd1) and non‐planar (saddle) dolomite cements (Cd2); they post‐date replacement dolomites and predate late‐stage calcite cements that line mouldic vugs and fractures. The replacement dolomites have δ¹⁸O values from ?13·7 to ?9·7‰ VPDB, δ¹³C values from ?2·7 to + 1·5‰ VPDB and ⁸⁷Sr/⁸⁶Sr ratios from 0·7082 to 0·7114. Fluid inclusion data of Rd3 dolomites yield homogenization temperatures (T_h) of 136–149 °C and salinities of 7·2–11·2 wt% NaCl equivalent. These data suggest that the replacive dolomitization could have occurred from slightly modified sea water and/or saline basinal fluids at relatively high temperatures, probably related to hydrothermal activities during the latest Givetian–middle Fammenian and Early Carboniferous times. Compared with replacement dolomites, Cd2 cements yield lower δ¹⁸O values (?14·2 to ?9·3‰ VPDB), lower δ¹³C values (?3·0 to ?0·7‰ VPDB), higher ⁸⁷Sr/⁸⁶Sr ratios (≈ 0·7100) and higher T_h values (171–209 °C), which correspond to trapping temperatures (T_r) between 260 and 300 °C after pressure corrections. These data suggest that the dolomite cements precipitated from higher temperature hydrothermal fluids, derived from underlying siliciclastic deposits, and were associated with more intense hydrothermal events during Permian–Early Triassic time, when the host dolostones were deeply buried. The petrographic similarities between some replacement dolomites and Cd2 dolomite cements and the partial overlap in ⁸⁷Sr/⁸⁶Sr and δ¹⁸O values suggest neomorphism of early formed replacement dolomites that were exposed to later dolomitizing fluids. However, the dolomitization was finally stopped through invasion of meteoric water as a result of basin uplift induced by the Indosinian Orogeny from the early Middle Triassic, as indicated by the decrease in salinities in the dolomite cements in veins (5·1–0·4 wt% NaCl equivalent). Calcite cements generally yield the lowest δ¹⁸O values (?18·5 to ?14·3‰ VPDB), variable δ¹³C values (?11·3 to ?1·2‰ VPDB) and high T_h values (145–170 °C) and low salinities (0–0·2 wt% NaCl equivalent), indicating an origin of high‐temperature, dilute fluids recharged by meteoric water in the course of basin uplift during the Indosinian Orogeny. Faults were probably important conduits that channelled dolomitizing fluids from the deeply buried siliciclastic sediments into the basal carbonates, leading to intense dolomitization (i.e. Rd3, Cd1 and Cd2).     

Dolomitization of Quaternary reef limestone, Aitutaki, Cook Islands

Six holes were drilled to depths of 30–69 m in the shallow lagoon of Aitutaki in the southern Cook Islands. One hole encountered pervasively dolomitized reef limestones at 36 m subbottom depth, which extended to the base of the drilled section at 69·3 m. This hole was drilled near the inner edge of the present barrier reef flat on the flank of a seismically defined subsurface ridge. Both the morphology and biofacies indicate that this ridge may represent an outer reef crest. Mineralogy, porosity and cementation change in concert downhole through three zones. Zone 1, 0–9 m, is composed of primary skeletal aragonite and calcite with minor void-filling aragonite and magnesian calcite cement of marine phreatic origin. Zone 2, 9–36 m, is composed of replacement calcite and calcite cement infilling intergranular, intragranular, mouldic and vuggy porosity. Stable isotopes (mean δ¹⁸O=—5·4‰ PDB for carbonate; δD =—50‰ SMOW for fluid inclusions) support the petrographic evidence indicating that sparry calcite cements formed in predominantly freshwater. Carbon isotope values of —4·0 to —11·0‰ for calcite indicate that organic matter and seawater were the sources of carbon. Zone 3, 36–69·3 m, is composed of replacement dolostone, consisting of protodolomite with, on average, 7 mol% excess CaCO₃ and broad and weak ordering X-ray reflections at 2·41 and 2·54 A. The fine-scale replacement of skeletal grains and freshwater void-filling cements by dolomite did not significantly reduce porosity. Stable isotopes (mean δ¹⁸O=+2·6‰₀ PDB for dolomite; maximum δD =—27‰ SMOW for fluid inclusions) and chemical composition indicate that the dolomite probably formed from seawater, although formation in the lower part of a mixed freshwater-seawater zone, with up to 40% freshwater contribution, cannot be completely ruled out. The carbon (δ¹³C=2·7‰) and magnesium were derived from seawater. Low-temperature hydrothermal iron hydroxides and associated transition metals occur in void space in several narrow stratigraphic intervals in the limestone section that was replaced by dolomite. The entire section of dolomite is also enriched in these transition metals. The metals dispersed throughout the dolostone section were introduced at the time of dolomitization by a different and later episode of hydrothermal circulation than the one(s) that produced the localized deposits near the base of the section. The primary reef framework is considered to have been deposited during several highstands of sea level. Following partial to local recrystallization of the limestone, a single episode of dolomitization occurred. Both tidal and thermal pumping drove large quantities of seawater through the porous rocks and perhaps maintained a wide mixing zone. However, the isotopic, geochemical and petrographic data do not clearly indicate the extent of seawater mixing.     

塔东北库鲁克塔格中上寒武统白云岩岩石学、地球化学特征与成因探讨——与加拿大西部盆地惠而浦(Whirlpoolpoint)剖面对比

通过对比研究塔里木盆地东北缘库鲁克塔格隆起的乌里格孜塔格剖面与加拿大西部盆地寒武系白云岩的岩石学、地球化学及流体包裹体等特征,阐明了前者经历了三次主要白云岩(化)作用事件.①成岩早期-浅埋藏的粉细晶白云岩作用,Sr为42.75×10-6,Mn为315×10-6 ～506×10-6,Fe为0.2650％ ～0.403％;δ13 CpDB=一0.47‰ ～-0.28‰,δ18OPDB=-7.3‰ ～-7.43‰,87Sr/86Sr=0.71085;平均REE=18.84×10-6,δEu平均为0.66、δCe平均为0.81,估算的形成温度分别为47.6℃和55.12℃;②中(深)埋藏的细晶及中(粗)晶白云岩化作用;Sr为56.27×10-6,Mn为312×10-6,Fe为0.13％;δ13CPDB=-1.5‰,δ18OPDB=-8.5‰,87Sr/86Sr=0.7100; REE=18.08×10-6,δEu平均为0.72、δCe平均为0.77,盐水包裹体中的均一温度平均为108.34℃,盐度变化为4％～13.7％ NaCleqv;③沿裂隙或溶洞形成的粗-巨晶或鞍形的热液白云岩(石)交代充填:Sr为29.1×10-6 ～49.9×10-6,Mn为498×10-6～754×10-6,Fe为0.15％ ～ 1.14％;平均δ13 CPDB=-0.48‰,δ18OPDB=-8.82‰,87Sr/86Sr=0.70996;平均REE=15.08×10-6,δEu平均为0.70、δCe平均为0.78;鞍形白云石中的盐水包裹体的均一温度120～150℃,盐度为5％ ～ 12％ NaCleqv;溶洞中的粗-巨晶白云岩盐水包裹体的均一温度140～180℃,盐度为5％ ～ 18％ NaCleqv;与西加盆地惠而浦(Whirlpool point)剖面典型的热液白云岩相比较,乌里格孜塔格剖面中寒武系白云岩中缝洞中的粗-巨晶及鞍形白云石中的碳氧同位素、稀土总量、轻重稀土比均要高,但有序度、δEu、δCe、盐水包裹体形成温度及盐度相对低;因而推断它与西加盆地典型的岩浆期后热液来源不同,其流体来源于沿深部伸展走滑断裂-再循环地层热卤水,与海西晚期或燕山期-喜马拉雅期强烈挤压后弱伸展引起的二期或以上的压扭-走滑构造有关.     

Dolomitization of the Capitan Formation forereef facies (Permian, west Texas and New Mexico): seepage reflux revisited

Abstract Interpretation of seepage reflux dolomitization is commonly restricted to intervals containing evaporites even though several workers have modelled reflux of mesosaline brines. This study looked at the partially dolomitized forereef facies of the Capitan Formation to test the extent of reflux dolomitization and evaluate the possible role of the near‐backreef mesosaline carbonate lagoon as an alternative source of dolomitizing fluids. The Capitan Formation forereef facies ranges from 10% to 90% dolomite. Most of the dolomite is fabric preserving and formed during early burial after marine cementation, before and/or during evaporite cementation and before stylolitization. Within the forereef facies, dolomite follows depositional units, with debris‐flow and grain‐flow deposits the most dolomitized and turbidity‐current deposits the least. The amount of dolomite increases with stratigraphic age and decreases downslope. Within the reef facies, dolomite is restricted to haloes around fractures and primary cavities except where the reef facies lacks marine cements and, in contrast, is completely dolomitized. This dolomite distribution supports dolomitization by sinking fluids. Oxygen isotopic values for fabric‐preserving dolomite (δ¹⁸O = 0·9 ± 1·0‰, N = 101) support dolomitization by sea water to isotopically enriched sea water. These values are closer to the near‐backreef dolomite (δ¹⁸O = 2·1 ± 0·7‰, N = 48) than the hypersaline backreef dolomite (δ¹⁸O = 3·6 ± 0·9‰, N = 11). Therefore, the fabric‐preserving dolomite is consistent with dolomitization during seepage reflux of mainly mesosaline brines derived from the near‐backreef carbonate lagoon. The occurrence of mesosaline brine reflux in the Capitan Formation has important implications for dolomitization in forereef facies and elsewhere. First, any area with a restricted carbonate lagoon may be dolomitized by refluxing brines even if there are no evaporite facies present. Secondly, such brines may travel significant distances vertically provided permeable pathways (such as fractures) are present. Therefore, the absence of immediately overlying evaporite or restricted facies is not sufficient cause to eliminate reflux dolomitization from consideration.     

Ordovician low- to intermediate-Mg calcite marine cements from Sweden: marine alteration and implications for oxygen isotopes in Ordovician seawater

Petrography demonstrates the presence of three types of fibrous calcite cement in buildup deposits of the Kullsberg Limestone (middle Caradoc), central Sweden. Translucent fibrous calcite has intrinsic blue luminescence (CL) indicative of pure calcite. This cement has 2–5 mol% MgCO₃, low Mn and Fe (≤ 100 p.p.m.), and is considered to be slightly altered to unaltered, primary low- to intermediate-Mg calcite. Grey turbid fibrous calcite has variable but generally low MgCO₃ content (most analyses <2 mol%) and variable CL response, with Mn and Fe concentrations up to 1200 and 500 p.p.m., respectively. The heterogeneous characteristics of this variety of fibrous calcite are caused by diagenetic alteration of a translucent fibrous calcite precursor. Light-brown turbid fibrous calcite has low MgCO₃ (near 1 mol%) and variable Mn (up to 800 p.p.m.) and Fe (up to 500 p.p.m.) concentrations, with an abundance of bright luminescent patches, which formed during alteration caused by reducing diagenetic fluids. The δ¹³C and δ¹⁸O values of all fibrous calcite form a tight field (δ¹³C=1·7 to 3·1‰ PDB, δ¹⁸O= ? 2·6 to ? 4·1‰ PDB) compared with fibrous calcite isotope values from other units. Fibrous calcite δ¹⁸O values are larger than adjacent meteoric or burial cements, which have δ¹⁸O δ ? 8‰ PDB. Consequently, most diagenetic alteration of Kullsberg fibrous calcite is interpreted to have occurred in the marine diagenetic realm. First-generation equant and bladed calcite cements, which pre-date fibrous calcite, are interpreted as unaltered, low-Mg calcite marine cements based on δ¹³C and δ¹⁸O data (δ¹³C = 2·3 to 2·7‰ PDB, δ¹⁸O= ? 2·8 to ? 3·5‰ PDB). Unlike fibrous cement, which reflects global sea water chemistry, first-generation equant and bladed calcite are indicators of localized modification of seawater chemistry in restricted settings. Kullsberg abiotic marine cements have larger δ¹⁸O values than most Caradoc marine precipitates from equatorial Laurentia. Positive Kullsberg δ¹⁸O values are attributed to lower seawater temperatures and/or slightly elevated salinity on the Baltic platform relative to seawater from which other marine precipitates formed.     

Changes in carbon and oxygen isotope composition during limestone diagenesis

The calcite fossils of the Derbyhaven Beds, Isle of Man, have δ¹³C values (+ 1·8 PDB) similar to modern, shallow-water marine skeletons, but the δ¹⁸O values (?6·1 PDB) are much lighter than modern skeletons. The light oxygen values indicate either re-equilibration with isotopically light water before cementation started, or Carboniferous sea water with δ¹⁸O of ?6‰. Aragonite dissolution was followed by precipitation of zoned calcite cement. In this cement, up to six intracrystalline zones, recognized in stained thin sections, show isotopic variation. Carbon varies from + 3-8 to + 1-2‰. and oxygen from ? 2-6 to ? 12-4‰. with decreasing age of the cement. This trend is attributed to increasing temperature and to isotopic evolution of the pore waters during burial. The zoned calcite is sequentially followed by dolomite and kaolinite cements which continue the trend towards light isotopic values. This trend is continued with younger, fault-controlled dolomite, and is terminated by vein-filling calcite and dolomite. The younger calcite, interpreted as a near-surface precipitate from meteoric waters, is unrelated to the older sequence of carbonates and has distinctly different carbon isotope ratios: δ¹³C ? 6-8‰.     

Dolomitization of the Devonian Swan Hills Formation, Rosevear Field, Alberta, Canada

The Swan Hills Formation (Middle-Upper Devonian) of the Western Canada Basin is host to several NW-SE-trending gas fields developed in massive replacement dolostone. One of these, the Rosevear Field, contains two major dolostone trends along opposing margins of a marine channel that penetrates into a platform-reef complex. Dolostones consist predominantly of branching and bulbous strdmatoporoid floatstones and rudstones with well-developed moldic and vuggy porosity. Replacement dolomite is coarsely crystalline (100-600 μm), inclusion-rich, composed of euhedral through anhedral crystals and has a blotchy to homogeneous red cathodoluminescence. Geochemically, replacement dolomite is characterized by (i) nearly stoichiometric composition (50.1-51.1 mol% CaCO₃), (ii) negative δ¹⁸O values (mean=-7.5‰, PDB) and (iii) variable ⁸⁷Sr/⁸⁶Sr ratios ranging from values similar to Late Devonian-Early Mississippian seawater (～0.7082) to radiogenic compositions comparable to saddle dolomite cements (>0.7100). Dolomitization began after widespread precipitation of early, equant calcite spar and after the onset of pressure solution, implying that replacement dolomite formed in a burial environment. Oxygen isotope data suggest that dolomite formed at 35-75°C, temperatures reached during burial in Late Devonian through Jurassic time, at minimum depths of 450 m. The linear NW-SE orientation of most dolomite fields in the Swan Hills Formation is suggestive of fault control on fluid circulation. Two models are proposed for fault-controlled circulation of dolomitizing fluids at the Rosevear Field. In the first, compaction-driven, updip fluid migration occurred in response to basin tilting commencing in the Late Palaeozoic. Deep basinal fluids migrating updip were focused into channel-margin sediments along fault conduits. The second model calls upon fault-controlled convective circulation of (i) warm Devonian-Mississippian seawater or (ii) Middle Devonian residual evaporitic brines. The overlap in ⁸⁷Sr/⁸⁶Sr and δ¹⁸O compositions, and similar cathodoluminescence properties between replacement and saddle dolomites provide evidence for neomorphism of some replacement dolomite. Quantitative modelling of Sr and O isotopes and Sr abundances suggests partial equilibration of some replacement dolomite with hot radiogenic brines derived during deep burial of the Swan Hills Formation in the Late Cretaceous-Palaeocene. Interaction of replacement dolomite with deep brines led to enrichment in ⁸⁷Sr while leaving δ¹⁸O similar to pre-neomorphism values.