The evolution of the Gulf of Corinth (Greece): an aftershock study of the 1981 earthquakes

Summary. A preliminary study of the aftershocks of three earthquakes that occurred near to Corinth (Greece) in 1981 is combined with observations of the morphology and faulting to understand the evolution of the Eastern Gulf of Corinth. The well located aftershocks form a zone 60km long and 20km wide. They do not lie on the main fault planes and are mostly located between the north-dipping faulting on which the first two earthquakes occurred and the south-dipping faulting associated with the third event. A cluster of aftershocks also lies in the footwall of the eastern end of the south-dipping fault of the third event.
Morphologically, it is observed that in the evolution of the Eastern Gulf of Corinth, antithetic faulting apparently predates the appearance of the main faulting at the surface. This evolution can be explained by motion on a deep seated, shallow angle, aseismic normal fault. A model based on such a fault also accounts for the aftershock distribution of the 1981 earthquakes.     

The diffuse transition between the Zagros continental collision and the Makran oceanic subduction (Iran): microearthquake seismicity and crustal structure

The nature of the transition between the Zagros intra-continental collision and the Makran oceanic subduction is a matter of debate: either a major fault cutting the whole lithosphere or a more progressive transition associated with a shallow gently dipping fault restricted to the crust. Microearthquake seismicity located around the transition between the transition zone is restricted to the west of the Jaz-Murian depression and the Jiroft fault. No shallow micro-earthquakes seem to be related to the NNW–SSE trending Zendan–Minab–Palami active fault system. Most of the shallow seismicity is related either to the Zagros mountain belt, located in the west, or to the NS trending Sabzevaran–Jiroft fault system, located in the north. The depth of microearthquakes increases northeastwards to an unusually deep value (for the Zagros) of 40 km. Two dominant types of focal mechanisms are observed in this region: low-angle thrust faulting, mostly restricted to the lower crust, and strike-slip at shallow depths, both consistent with NS shortening. The 3-D inversion of P traveltimes suggests a high-velocity body dipping northeastwards to a depth of 25 km. This high-velocity body, probably related to the lower crust, is associated with the deepest earthquakes showing reverse faulting. We propose that the transition between the Zagros collision and the Makran subduction is not a sharp lithospheric-scale transform fault associated with the Zendan–Minab–Palami fault system. Instead it is a progressive transition located in the lower crust. The oblique collision results in partial partitioning between strike-slip and shortening components within the shallow brittle crust because of the weakness of the pre-existing Zendan–Minab–Palami faults.     

Modelling the effect of atmospheric pressure variations on gravity

Summary. The 1973 Hawaii earthquake occurred north of Hilo, at a depth of 40 to 50km. The location was beneath the east flank of Mauna Kea, a volcano dormant historically, but active within the last 4000 yr. Aftershocks were restricted to a depth of 55–35km. The event and its aftershock sequence are located in an area not normally associated with the seismicity of the Mauna Loa and Kilauea calderas. The earthquake was a double event, the epicentres trending NE-SW. The events were of similar size and faulting mechanism. The fault plane solutions obtained by seismic waveform analysis are a strike-slip fault striking EW and dipping 55° S, the auxiliary plane a NS vertical plane with a faulting plunge of 35°. The axis of maximum compressive stress is aligned with the direction of the gravity gradient associated with the island of Hawaii. The fault plane striking EW parallels a surface feature, the Mauna Kea east rift zone. The earthquakes were clearly not associated with volcanic activity normally associated with Mauna Loa and Kilauea and may indicate a deep seated prelude to a resumption of activity at Mauna Kea.     

New seismogenic source and deep structures revealed by the 1999 Chia-yi earthquake sequence in southwestern Taiwan

In a tectonically active setting large earthquakes are always threats; however, they may also be useful in elucidating the subsurface geology. Instrumentally recorded seismicity is, therefore, widely utilized to extend our knowledge into the deeper crust, especially where basement is involved. It is because the earthquakes are triggered by underground stress changes that usually corresponding to the framework of geological structures. Hidden faults, therefore, can be recognized and their extension as well as orientation can be estimated. Both above are of relevance for assessment on seismic hazard of a region, since the active faults are supposed to be re-activated and cause large earthquakes. In this study, we analysed the 1999 October 22 earthquake sequence that occurred in southwestern Taiwan. Two major seismicity clusters were identified with spatial distribution between depths of 10 and 16 km. One cluster is nearly vertical and striking 032°, corresponding to the strike-slip Meishan fault (MSF) that generated the 1906 surface rupture. Another cluster strikes 190° and dips 64° to the west, which is interpreted as west-vergent reverse fault, in contrast to previous expectation of east vergence. Our analysis of the focal solutions of all the larger earthquakes in the 1999 sequence with the 3-D distribution of all the earthquakes over the period 1990–2004 allows us reinterpret the structural framework and suggest previously unreognized seismogenic sources in this area. We accordingly suggest: (1) multiple detachment faults are present in southwestern Taiwan coastal plain and (2) additional seismogenic sources consist of tear faults and backthrust faults in addition to sources associated with west-vergent fold-and-thrust belt.     

Modelling deformation rates in the western Gulf of Corinth: rheological constraints

The Gulf of Corinth is one of the most active extensional regions in the Mediterranean area characterized by a high rate of seismicity. However, there are still open questions concerning the role and the geometry of the numerous active faults bordering the basin, as well as the mechanisms governing the seismicity. In this paper, we use a 2-D plane strain finite element analysis to constrain the upper crust rheology by modelling the available deformation data (GPS and geomorphology). We consider a SSW–NNE cross-section of the rift cutting the main active normal faults (Aigion, West Eliki and Off-Shore faults). The models run for 650 Kyr assuming an elasto-viscoplastic rheology and 1.3 cm yr⁻¹ horizontal extension as boundary condition (resulting from GPS data). We model the horizontal and vertical deformation rates and the accumulation of plastic strain at depth, and we compare them with GPS data, with long term uplift rates inferred from geomorphology and with the distribution of seismicity, respectively. Our modelling results demonstrate that dislocation on high-angle normal faults in a plastic crustal layer plays a key role in explaining the extremely localized strain within the Gulf of Corinth. Conversely, the contribution of structures such as the antithetic Trizonia fault or the buried hypothetical subhorizontal discontinuity are not necessary to model observed data.     

Syn-sedimentary structural controls on basin deformation in the Gulf of Corinth, Greece

Abstract The Plio-Quaternary history of the Gulf of Corinth Basin has been controlled by dominantly north-south extension. The basin has an asymmetric graben geometry that is, at the present time, controlled by a master fault (the Gulf of Corinth Fault) downthrowing to the north and running offshore from the north Peloponnese coast.
Detailed structural interpretation of single-channel seismic data collected during RRS 'Shackleton' cruise 1/82 combined with onshore structural studies indicates that the basin geometry is not controlled simply by the main Gulf of Corinth Fault. The subsidence history for the uppermost 1 km of sediment can be documented using time-structure contour maps and isochron maps. These indicate that there is a general narrowing in the size of the basin with time, achieved by fault-controlled subsidence switching to antithetic faults concentrated towards the basin centre. It can also be demonstrated that growth of sediments into topographic lows is not only controlled by sea bed rupture but also by more passive sea bed flexure over 'blind' faults at depth.
The main conclusion of this study is that the 3D geometry of the Gulf of Corinth Basin changes not only spatially but also temporally. Active growth faulting and, therefore, the position of depocentres can switch across the basin and the relative importance of synthetic and antithetic faults controls the geometry of the basin, forming grabens, asymmetric grabens and half-grabens throughout the basin history.     

Fault architecture, basin structure and evolution of the Gulf of Corinth Rift, central Greece

The style of extension and strain distribution during the early stages of intra-continental rifting is important for understanding rift-margin development and can provide constraints for lithospheric deformation mechanisms. The Corinth rift in central Greece is one of the few rifts to have experienced a short extensional history without subsequent overprinting. We synthesise existing seismic reflection data throughout the active offshore Gulf of Corinth Basin to investigate fault activity history and the spatio-temporal evolution of the basin, producing for the first time basement depth and syn-rift sediment isopachs throughout the offshore rift. A major basin-wide unconformity surface with an age estimated from sea-level cycles at ca . 0.4 Ma separates distinct seismic stratigraphic units. Assuming that sedimentation rates are on average consistent, the present rift formed at 1–2 Ma, with no clear evidence for along-strike propagation of the rift axis. The rift has undergone major changes in relative fault activity and basin geometry during its short history. The basement depth is greatest in the central rift (maximum ∼3 km) and decreases to the east and west. In detail however, two separated depocentres 20–50 km long were created controlled by N- and S-dipping faults before 0.4 Ma, while since ca . 0.4 Ma a single depocentre (80 km long) has been controlled by several connected N-dipping faults, with maximum subsidence focused between the two older depocentres. Thus isolated but nearby faults can persist for timescales ca . 1 Ma and form major basins before becoming linked. There is a general evolution towards a dominance of N-dipping faults; however, in the western Gulf strain is distributed across several active N- and S-dipping faults throughout rift history, producing a more complex basin geometry.     

Seismic reflection measurements behind the Hikurangi convergent margin, southern North Island, New Zealand.

Summary. The active Australian-Pacific plate boundary passes through New Zealand. In the north, the Pacific plate subducts beneath the Australian plate with an accretionary wedge forming the eastern continental (Hikurangi) margin of the North Island. The structure of the region behind the Hikurangi margin changes from the extensional back-arc basin under central North Island to a postulated crustal downwarp under the southern North Island. A 100 km long multichannel seismic reflection profile was recorded across the region of crustal downwarp. The data show discontinuous coherent reflectors dipping westwards at the east end of the profile, and east dipping reflectors at the west end, from depths of 9 to 15 s two way time. Simple hand migration of these events indicate that the east dipping reflectors, interpreted as the base of the Australian plate crust, abut against the west dipping reflectors which are interpreted as marking the top of the subducted Pacific plate. Detailed earthquake hypocentre locations in the area show a dipping zone of high seismicity, the top of which coincides closely with the west dipping events, thus supporting this interpretation.     

The deep seismicity of the Tyrrhenian Sea

The study reappraises the deep seismicity of the Tyrrhenian Sea. Careful examination of the quality of reported hypocentres shows that the earthquakes define a zone dipping NW, about 200 km along strike, 50 km thick, and reaching a depth of about 500 km. The zone is slightly concave to the NW at a depth of 300 km, but, contrary to many previous reports, is not tightly concave, nor are there significant spatial gaps in the seismicity, which is effectively continuous with depth. Seismicity is, however, concentrated in the depth interval 250–300 km, where the dip of the seismic zone changes from 70° (above 250 km) to a more gentle dip of 45° at greater depths. Seven fault-plane solutions are available for the largest earthquakes in this depth interval, all of them consistent with a P -axis down the dip of the seismic zone, and all of them requiring movement on faults out of the plane of the subducting slab.
Two deep earthquakes near Naples lie well outside the main zone of activity; for one of which a fault-plane solution is available that has a P -axis not aligned with the dip of the seismic zone. The tightly concave slab-geometry favoured by other reports is supported mainly by the location of these events near Naples, which we think may represent deformation in a separate, probably shallower dipping, piece of subducted lithosphere.
The lack of shallow seismicity, and particularly of thrust faulting earthquakes, at the surface projection of the Benioff zone suggests that active subduction has ceased. Estimates of the convergence rate responsible for subduction in the last 10 Myr far exceed the present convergence rate of Africa and Eurasia, suggesting that the subduction was related instead to the stretching and thinning of the crust in the Tyrrhenian Sea.     

Tectono‐sedimentary evolution of the western Corinth rift (Central Greece)

The Corinth rift (Greece) is one of the world's most active rifts. The early Plio‐Pleistocene rift is preserved in the northern Peloponnese peninsula, south of the active Corinth rift. Although chronostratigraphic resolution is limited, new structural, stratigraphic and sedimentological data for an area >400 km² record early rift evolution in three phases separated by distinct episodes of extension rate acceleration and northward fault migration associated with major erosion. Minimum total N–S extension is estimated at 6.4–7.7 km. The earliest asymmetrical, broad rift accommodated slow extension (0.6–1 mm a^?1) over >3 Myrs and closed to the west. North‐dipping faults with throws of 1000–2200 m defined narrow blocks (4–7 km) with little footwall relief. A N‐NE flowing antecedent river system infilled significant inherited relief (Lower group). In the earliest Pleistocene, significant fluvial incision coincided with a 15 km northward rift margin migration. Extension rates increased to 2–2.5 mm a^?1. The antecedent rivers then built giant Gilbert‐type fan deltas (Middle group) north into a deepening lacustrine/marine basin. N‐dipping, basin margin faults accommodated throws <1500 m. Delta architecture records initiation, growth and death of this fault system over ca. 800 ka. In the Middle Pleistocene, the rift margin again migrated 5 km north. Extension rate increased to 3.4–4.8 mm a^?1. This transition may correspond to an unconformity in offshore lithostratigraphy. Middle group deltas were uplifted and incised as new hangingwall deltas built into the Gulf (Upper group). A final increase to present‐day extension rates (11–16 mm a^?1) probably occurred in the Holocene. Fault and fault block dimensions did not change significantly with time suggesting control by crustal rheological layering. Extension rate acceleration may be due to strain softening or to regional tectonic factors.     

A seismological study of normal faulting in the Demirci, Alaşehir and Gediz earthquakes of 1969–70 in western Turkey: implications for the nature and geometry of deformation in the continental crust

Summary. In this study, seismological techniques are combined with surface observations to investigate the faulting associated with three large earthquakes in western Turkey. All involved normal faulting that nucleated at 6–10 km depth with dips in the range 30–50°. The two largest earthquakes, at Alaşehir (1969.3.28) and Gediz (1970.3.28), were clearly multiple events and their seismograms indicate that at least two discrete subevents were involved in producing the observed surface faulting. In addition, their seismograms contain later, longer-period signals that are likely to represent source, not structure or propagation, complexities. These later signals can be modelled by subevents with long time functions on almost flat detachment-type faults.
As a result of these observations, we propose a model for the deformation of the lower crust, in which brittle failure of the top part occurs when high strain rates are imposed during an earthquake that ruptures right through the upper, brittle crust. Under these special circumstances, seismic motion occurs on discrete faults in the lower crust, which otherwise normally deforms by distributed creep. In the case of the normal faults studied here, motion in the uppermost lower crust takes place on shallow dipping faults that are downward continuations of the steeper faults that break to the surface. The faults thus have an overall listric geometry, flattening into a weak zone below the brittle layer at a depth that is probably dependent on the termperature gradient. This interpretation explains why detachment-type mechanisms are not seen in first motion fault plane solutions of normal faulting earthquakes, and suggests an origin for the Metamorphic Core Complexes seen in the Basin and Range Province, which probably represent flat lower crustal faults, analogous to those postulated at Alaşehir and Gediz, that have been uplifted to the surface.     

A conjugate strike-slip fault system within the extensional tectonics of Western Turkey

Three main shocks M-1, M-2 and M-3 (17 October 2005 at 05:45 UTC, M _w 5.4; 17 October at 09:46 UTC, M _w 5.8 and 20 October at 21:40 UTC, M _w 5.9) and their associated aftershocks within the Gulf of S i ğac i k, 50 km southwest of Izmir, Turkey were studied in detail. A temporary seismic network deployed during the activity allowed the hypocentre of M-3 and subsequent aftershocks to be determined with high accuracy. A relative relocation technique was used to improve the epicentres of M-1 and M-2. All three main shocks have strike-slip mechanisms which agree with the linear trends of the aftershock locations. Two distinct zones were illuminated by the aftershock locations. The zones contain clear echelon patterns with slightly different orientations from the trend of the aftershock distribution. M-2 and M-3 ruptured along of the eastern rupture zone which aligns N45°E. However the strike direction of M-1 is not clearly identified. The alignment of the two rupture zones intersect at their southern terminus at an angle of 90°. The fault zones form conjugate pair system and static triggering is considered as a probable mechanism for the sequential west to east occurrence of M-1, M-2 and M-3. This earthquake sequence provides seismological evidence for conjugate strike-slip faulting co-existing within a region dominated by north–south extension and well-developed east–west trending normal faults.     

The Corinth-Patras rift as the initial stage of continental fragmentation behind an active island arc (Greece)

Abstract During the migration of the back arc extension from central to western Greece the Corinth and Patras grabens are being formed. Orthogonal opening of these graben zones is accomplished by WNW listric normal faults and NNE transfer faults which produce an along-axis fragmentation. The listric faults show an increase in the dip of the fault plane westwards as well as a decrease in the maximum extension rate from 50% to the east in the Corinth graben, to 10% to the west in the Patras graben. Similarly, towards the west, Plio-Quaternary deposits become thinner whereas Pliocene sediments thin-out indicating a westward rift propagation.
As the back arc extension migrates westwards it is interacting or is being superimposed above another orthogonal fault system consisting of NNW and ENE normal faults. These faults have been formed during general uplift behind the orogenic front which has been migrating from western Greece to the Ionian islands. The ENE-trending Rio graben which belongs to his orthogonal system connects the Patras graben to the Corinth graben and has subsequently been active as a transfer fault between them.
Plio-Quaternary geodynamic processes in central continental Greece are quite similar to those earlier processes observed in the central Aegean region which reflect the initial stage of continental break-up behind a migrating orogenic front.     

An earthquake swarm on the Chagos—Laccadive Ridge and its tectonic implications

Summary. An unusual, isolated swarm of earthquakes occurred on the Chagos-Laccadive Ridge in the Central Indian Ocean between 1965 and 1970. Sixteen earthquakes were "located at approximately 6.0° S, 71.3°E on the steep west facing scarp of the Chagos Bank. This swarm forms the only major seismic activity in the period 1963–76 on the otherwise aseismic ridge. The mechanisms of the three largest earthquakes were studied using body- and surface-wave data. All are extremely similar shallow normal fault events on an east—west fault plane. Such faulting is difficult to reconcile with that expected from either the trend of the Chagos-Laccadive Ridge or the spreading direction at the nearby Central Indian Ridge. The swarm may have occurred at depth on a cross fracture remaining from the breakup of the Chagos Bank and the Mascarene Plateau and the formation of the present Central Indian Ridge.     

Seismicity and seismic gap in the Lesser Antilles arc and earthquake hazard in Guadeloupe

Summary. A seismic study of the Lesser Antilles arc has been carried out, first for the period 1950–1978, for which we can use local seismic networks to draw maps of instrumental seismicity, then for the period 1530–1950, for which we have catalogues of felt earthquakes. The striking feature of the spatial distribution of foci is the cluster of epicentres in the northern half of the arc; all large earthquakes ( M > 7.5) are located north of 14° latitude. Seismicity cross-sections through the arc show a variable dipping subduction zone along the arc; the deep seismic zone is steeper in the centre of the arc than on the extremity.
The time-space diagram for historical seismicity, and the evidence of a seismic gap at the east of Guadeloupe lead us to consider the northern half arc as a likely site for a large earthquake in the near future.
The seismic slip rate calculated from all major earthquakes since 1530 is of much greater value than that obtained from recent plate tectonic models, suggesting that the recurrence rate of earthquakes is more than many hundreds of years with a possible aseismic creep.     

Spherical harmonic representation of the magnetic field in the presence of a current density

Summary. We present the results of a systematic study of events with M _s > 6 in northern Chile (20–33°S), for the period between 1963 and 1971. Medium to large earthquakes near the coast of this region are of three types: (1) Interplate events at the interface between the downgoing slab and the overriding South American plate. These events can be very large reaching magnitudes greater than 8. (2) Intra-plate earthquakes 20–30 km inside the downgoing slab. They have fault mechanisms indicating extension along the dip of the slab and may have magnitudes up to 7.5. (3) Less frequent, M _s∼ 6 events that occur near the top of the downgoing slab and have thrust mechanisms with an almost horizontal E-W compressional axis. This type of mechanism is very different from that of the events of type 1 which are due to shallow dipping reverse faulting. There is a rotation of about 30° of the compressional axis in the vertical plane between events of types (1) and (3). Three groups of events near 32.5°, 25.5° and 21°s were studied in detail. Depth and mechanisms were redetermined by P -wave modelling and relative locations were obtained by a master event technique. Near 32.5°S, only events of types 1 and 2 were found in the time period of this study. At the two other sites, the three types of events were identified. This shows clearly that there are compressive stresses at the top of the slab and extension at the centre, a situation which is usually found in the areas where a double Benioff-zone has been identified in the seismicity.     

Seismic reflection imaging of active offshore faults in the Gulf of Corinth: their seismotectonic significance

High resolution seismic reflection surveys over one of the most active and rapidly extending regions in the world, the Gulf of Corinth, have revealed that the gulf is a complex asymmetric graben whose geometry varies significantly along its length. A detailed map of the offshore faults in the gulf shows that a major fault system of nine distinct faults limits the basin to the south. The northern Gulf appears to be undergoing regional subsidence and is affected by an antithetic major fault system consisting of eight faults. All these major faults have been active during the Quaternary. Uplifted coastlines along their footwalls, growth fault patterns and thickening of sediment strata toward the fault planes indicate that some of these offshore faults on both sides of the graben are active up to present. Our data ground‐truth recent models and provides actual observations of the distribution of variable deformation rates in the Gulf of Corinth. Furthermore they suggest that the offshore faults should be taken into consideration in explaining the high extension rates and the uplift scenarios of the northern Peloponnesos coast. The observed coastal uplift appears to be the result of the cumulative effect of deformation accommodated by more than one fault and therefore, average uplift rates deduced from raised fossil shorelines, should be treated with caution when used to infer individual fault slip rates. Seismic reflection profiling is a vital tool in assessing seismic hazard and basin‐formation in areas of active extension.     

Electrical conductivity and crustal structure beneath the central Hellenides around the Gulf of Corinth (Greece) and their relationship with the seismotectonics

A deep magnetotelluric sounding (MTS) investigation in the western part of the Gulf of Corinth has revealed a complex electrical image of the crustal structure. The geotectonic structure of the Parnassos unit and the Transition zone in the central Hellenides, overthrusting the Pindos zone both towards the west and towards the south, has been clearly identified by its higher resistivity and its intrinsic anisotropy related to the N–S strike of the Hellenides range. Subsequent N–S extension of the Gulf introduced another heterogeneous anisotropy characteristic that corresponds to E–W-trending normal faults on both sides of the Gulf. The 2-D modelling of the MTS results reveals the existence of a relatively conductive layer about 4 km thick at a depth greater than 10 km in the middle crust. It corresponds to a ductile detachment zone suggested by microseismic and seismic studies ( King et al . 1985 ; Rigo et al . 1996 ; Bernard et al . 1997a ). It may be attributed to the phyllite series lying between the allochthonous Hellenic nappes and the autochthonous Plattenkalk basement. Towards the east, under the Pangalos peninsula, approaching the internal Hellenides, the detachment zone could root deeply into the lower crust.
Some strong local electrical anomalies are observed, reaching the conductive layer in the middle crust, such as that under the Mamousia fault and under the front of the overthrust of the Transition zone on the Pindos zone. Other anomalies affect only the shallower zones such as that beneath the Helike fault and in the Psaromita peninsula. These shallower anomalies provide complementary information to the study of spatial and temporal variations of the seismic anisotropy in relation to the short- and long-term tectonic activity of the Gulf ( Bouin et al . 1996 ; Gamar et al . 1999 ).     

Active tectonics of an apparently aseismic region: distributed active strike-slip faulting in the Hangay Mountains of central Mongolia

We identify and describe a series of east–west left-lateral strike-slip faults (named the Songino-Margats, the Hag Nuur, the Uliastay and the South Hangay fault systems) in the Hangay mountains of central Mongolia: an area that has little in the way of recorded seismicity and which is often considered as a rigid block within the India–Eurasia collision zone. The strike-slip faults of central Mongolia constitute a previously unrecognized hazard in this part of Mongolia. Each of the strike-slip faults show indications of late Quaternary activity in the form of aligned sequences of sag-ponds and pressure-ridges developed in alluvial deposits. Total bed-rock displacements of ∼3 km are measured on both the Songino-Margats and South Hangay fault systems. Bed-rock displacements of 11 km are observed across the Hag Nuur fault. Cumulative offset across the Uliastay fault systems are unknown but are unlikely to be large. We have no quantitative constraint on the age of faulting in the Hangay. The ≤20 km of cumulative slip on the Hangay faults might, at least in part, be inherited from earlier tectonic movements. Our observations show that, despite the almost complete absence of instrumentally recorded seismicity in the Hangay, this part of Mongolia is cut through by numerous distributed strike-slip faults that accommodate regional left-lateral shear between Siberia and China. Central Mongolia is thus an important component of the India–Eurasia collision that would be overlooked in models of the active tectonics based on the distribution of seismicity. We suggest that active faults such as those identified in the Hangay of Mongolia might exist in other, apparently aseismic, regions within continental collision zones.     

Geodetic evidence for conjugate faulting during the 1988 Tennant Creek, Australia earthquake sequence

b
Repeat levelling measurements and detailed topographic profiles from the epicentral area of the 1988 January 22 Tennant Creek, Australia earthquakes are used to constrain the geometry of faulting associated with three M 6+ earthquakes. The observed elevation changes are modelled assuming elastic deformation and uniform slip on several faults. The vertical deformation data are poorly fit by a single-fault model, and require at least three distinct faults. In the preferred model, two faults on either end of the zone of surface rupture have similar orientations, but the central fault has an orientation conjugate to the flanking faults. This interpretation is consistent with the identification of the fault planes with well-defined, dipping zones of aftershock hypocentres determined with data from portable seismograph arrays. It is also consistent with the sense of surficial deformation documented by 75 topographic profiles across the scarps. However, a fourth fault associated with possible conjugate faulting in the central fault segment at the time of the second main shock is not required by the levelling data.