Petrography and geochemistry of the LaPaz Icefield basaltic lunar meteorite and source crater pairing with Northwest Africa 032

Abstract— We report on the bulk composition and petrography of four new basaltic meteorites found in Antarctica—LAP (LaPaz Icefield) 02205, LAP 02224, LAP 02226, and LAP 02436—and compare the LAP meteorites to other lunar mare basalts. The LAP meteorites are coarse‐grained (up to 1.5 mm), subophitic low‐Ti basalts composed predominantly of pyroxene and plagioclase, with minor amounts of olivine, ilmenite, and a groundmass dominated by fayalite and cristobalite. All of our observations and results support the hypothesis that the LAP stones are mutually paired with each other. In detail, the geochemistry of LAP is unlike those of any previously studied lunar basalt except lunar meteorite NWA (Northwest Africa) 032. The similarities between LAP and NWA 032 are so strong that the two meteorites are almost certainly source crater paired and could be two different samples of a single basalt flow. Petrogenetic modeling suggests that the parent melt of LAP (and NWA 032) is generally similar to Apollo 15 low‐Ti, yellow picritic glass beads, and that the source region for LAP comes from a similar region of the lunar mantle as previously analyzed lunar basalts.     

Searching for nonlocal lithologies in the Apollo 12 regolith: A geochemical and petrological study of basaltic coarse fines from the Apollo lunar soil sample 12023,155

New data from a petrological and geochemical examination of 12 coarse basaltic fines from the Apollo 12 soil sample 12023,155 provide evidence of additional geochemical diversity at the landing site. In addition to the bulk chemical composition, major, minor, and trace element analyses of mineral phases are employed to ascertain how these samples relate to the Apollo 12 lithological basalt groups, thereby overcoming the problems of representativeness of small samples. All of the samples studied are low‐Ti basalts (0.9–5.7 wt% TiO₂), and many fall into the established olivine, pigeonite, and ilmenite classification of Apollo 12 basaltic suites. There are five exceptions: sample 12023,155_1A is mineralogically and compositionally distinct from other Apollo 12 basalt types, with low pigeonite REE concentrations and low Ni (41–55 ppm) and Mn (2400–2556 ppm) concentrations in olivine. Sample 12023,155_11A is also unique, with Fe‐rich mineral compositions and low bulk Mg# (=100 × atomic Mg/[Mg+Fe]) of 21.6. Sample 12023,155_7A has different plagioclase chemistry and crystallization trends as well as a wider range of olivine Mg# (34–55) compared with other Apollo 12 basalts, and shows greater similarities to Apollo 14 high‐Al basalts. Two other samples (12023,155_4A, and _5A) are similar to the Apollo 12 feldspathic basalt 12038, providing additional evidence that feldspathic basalts represent a lava flow proximal to the Apollo 12 site rather than material introduced by impacts. We suggest that at least one parent magma, and possibly as many as four separate parent magmas, are required in addition to the previously identified olivine, pigeonite, and ilmenite basaltic suites to account for the observed chemical diversity of basalts found in this study.     

Assessing the accuracy of phase equilibrium software in reproducing the liquidus multiple saturation conditions of lunar and Martian basalt compositions

Accurate computational modeling allows the use of software as a first approach to some petrological problems that typically require experimentation, but most programs have not yet been fully tested for accuracy with lunar or Martian melt compositions. The programs pMELTS, MAGPOX, and Perple_X stand out for phase equilibrium modeling, as their calibrations include experiments of lunar compositions or have precise thermodynamic constraints for similar compositions. A set of lunar mare basalts, picritic glasses, and basaltic Martian compositions with known experimentally determined multiple saturation point (MSP) conditions were used here for phase equilibrium modeling. The accuracy of each program was tested through the determination of MSPs on the liquidus of the selected compositions. This point in pressure–temperature space can be considered as a direct proxy of the stable phases and the equilibrium conditions during partial melting of mantle sources. We identify a trend in experimental data between MSP temperature and MgO, CaO, and SiO₂ concentrations, and similar trends are found in model results. However, only Perple_X is able to closely match the experimental data, despite the fact it does not accurately model ilmenite saturation for high-Ti lunar basalts. We find that pMELTS miscalculates olivine saturation for MgO-rich compositions and MAGPOX systematically underestimates MSP pressure and temperatures and can only be used when olivine is the liquidus phase. For modeling lunar or Martian basalt compositions, Perple_X can be used for optimal results, although no software is yet capable of bypassing the need to constrain MSP conditions through experimentation.     

Characterization of multiple lithologies within the lunar feldspathic regolith breccia meteorite Northeast Africa 001

Abstract– Lunar meteorite Northeast Africa (NEA) 001 is a feldspathic regolith breccia. This study presents the results of electron microprobe and LA‐ICP‐MS analyses of a section of NEA 001. We identify a range of lunar lithologies including feldspathic impact melt, ferroan noritic anorthosite and magnesian feldspathic clasts, and several very‐low titanium (VLT) basalt clasts. The largest of these basalt clasts has a rare earth element (REE) pattern with light‐REE (LREE) depletion and a positive Euanomaly. This clast also exhibits low incompatible trace element (ITE) concentrations (e.g., <0.1 ppm Th, <0.5 ppm Sm), indicating that it has originated from a parent melt that did not assimilate KREEP material. Positive Eu‐anomalies and such low‐ITE concentrations are uncharacteristic of most basalts returned by the Apollo and Luna missions, and basaltic lunar meteorite samples. We suggest that these features are consistent with the VLT clasts crystallizing from a parent melt which was derived from early mantle cumulates that formed prior to the separation of plagioclase in the lunar magma ocean, as has previously been proposed for some other lunar VLT basalts. Feldspathic impact melts within the sample are found to be more mafic than estimations for the composition of the upper feldspathic lunar crust, suggesting that they may have melted and incorporated material from the lower lunar crust (possibly in large basin‐forming events). The generally feldspathic nature of the impact melt clasts, lack of a KREEP component, and the compositions of the basaltic clasts, leads us to suggest that the meteorite has been sourced from the Outer‐Feldspathic Highlands Terrane (FHT‐O), probably on the lunar farside and within about 1000 km of sources of both Low‐Ti and VLT basalts, the latter possibly existing as cryptomaria deposits.     

An analysis of Apollo lunar soil samples 12070,889, 12030,187, and 12070,891: Basaltic diversity at the Apollo 12 landing site and implications for classification of small‐sized lunar samples

Lunar mare basalts provide insights into the compositional diversity of the Moon's interior. Basalt fragments from the lunar regolith can potentially sample lava flows from regions of the Moon not previously visited, thus, increasing our understanding of lunar geological evolution. As part of a study of basaltic diversity at the Apollo 12 landing site, detailed petrological and geochemical data are provided here for 13 basaltic chips. In addition to bulk chemistry, we have analyzed the major, minor, and trace element chemistry of mineral phases which highlight differences between basalt groups. Where samples contain olivine, the equilibrium parent melt magnesium number (Mg#; atomic Mg/[Mg + Fe]) can be calculated to estimate parent melt composition. Ilmenite and plagioclase chemistry can also determine differences between basalt groups. We conclude that samples of approximately 1–2 mm in size can be categorized provided that appropriate mineral phases (olivine, plagioclase, and ilmenite) are present. Where samples are fine‐grained (grain size <0.3 mm), a “paired samples t‐test” can provide a statistical comparison between a particular sample and known lunar basalts. Of the fragments analyzed here, three are found to belong to each of the previously identified olivine and ilmenite basalt suites, four to the pigeonite basalt suite, one is an olivine cumulate, and two could not be categorized because of their coarse grain sizes and lack of appropriate mineral phases. Our approach introduces methods that can be used to investigate small sample sizes (i.e., fines) from future sample return missions to investigate lava flow diversity and petrological significance.     

Petrogenesis of the Northwest Africa 4898 high‐Al mare basalt

Northwest Africa (NWA) 4898 is the only low‐Ti, high‐Al basaltic lunar meteorite yet recognized. It predominantly consists of pyroxene (53.8 vol%) and plagioclase (38.6 vol%). Pyroxene has a wide range of compositions (En_12–62Fs_25–62Wo_11–36), which display a continuous trend from Mg‐rich cores toward Ca‐rich mantles and then to Fe‐rich rims. Plagioclase has relatively restricted compositions (An_87–96Or_0–1Ab_4–13), and was transformed to maskelynite. The REE zoning of all silicate minerals was not significantly modified by shock metamorphism and weathering. Relatively large (up to 1 mm) olivine phenocrysts have homogenous inner parts with Fo ~74 and sharply decrease to 64 within the thin out rims (~30 μm in width). Four types of inclusions with a variety of textures and modal mineralogy were identified in olivine phenocrysts. The contrasting morphologies of these inclusions and the chemical zoning of olivine phenocrysts suggest NWA 4898 underwent at least two stages of crystallization. The aluminous chromite in NWA 4898 reveals that its high alumina character was inherited from the parental magma, rather than by fractional crystallization. The mineral chemistry and major element compositions of NWA 4898 are different from those of 12038 and Luna 16 basalts, but resemble those of Apollo 14 high‐Al basalts. However, the trace element compositions demonstrate that NWA 4898 and Apollo 14 high‐Al basalts could not have been derived from the same mantle source. REE compositions of its parental magma indicate that NWA 4898 probably originated from a unique depleted mantle source that has not been sampled yet. Unlike Apollo 14 high‐Al basalts, which assimilated KREEPy materials during their formation, NWA 4898 could have formed by closed‐system fractional crystallization.     

Northwest Africa 032: Product of lunar volcanism

Abstract— Mineralogy, major element compositions of minerals, and elemental and oxygen isotopic compositions of the whole rock attest to a lunar origin of the meteorite Northwest Africa (NWA) 032, an unbrecciated basalt found in October 1999. The rock consists predominantly of olivine, pyroxene and chromite phenocrysts, set in a crystalline groundmass of feldspar, pyroxene, ilmenite, troilite and trace metal. Whole‐rock shock veins comprise a minor, but ubiquitous portion of the rock. Undulatory to mosaic extinction in olivine and pyroxene phenocrysts and micro‐faults in groundmass and phenocrysts also are attributed to shock. Several geochemical signatures taken together indicate unambiguously that NWA 032 originated from the Moon. The most diagnostic criteria include whole‐rock oxygen isotopic composition and ratios of Fe/Mn in the whole rock, olivine, and pyroxene. A lunar origin is documented further by the presence of Fe‐metal, troilite, and ilmenite; zoning to extremely Fe‐rich compositions in pyroxene; the ferrous oxidation state of all Fe in pyroxene; and the rare earth element (REE) pattern with a well‐defined negative europium anomaly. This rock is similar in major element chemistry to basalts from Apollo 12 and 15, but is enriched in light REE and has an unusually high Th/Sm ratio. Some Apollo 14 basalts yield a closer match to NWA 032 in REE patterns, but have higher concentrations of Al₂O₃. Ar‐Ar step release results are complex, but yield a whole‐rock age of ?2.8 Ga, suggesting that NWA 032 was extruded at 2.8 Ga or earlier. This rock may be the youngest sample of mare basalt collected to date. Noble gas concentrations combined with previously collected radionuclide data indicate that the meteorite exposure history is distinct from currently recognized lunar meteorites. In short, the geochemical and petrographic features of NWA 032 are not matched by Apollo or Luna samples, nor by previously identified lunar meteorites, indicating that it originates from a previously unsampled mare deposit. Detailed assessment of petrographic features, olivine zoning, and thermodynamic modelling indicate a relatively simple cooling and crystallization history for NWA 032. Chromite‐spinel, olivine, and pyroxene crystallized as phenocrysts while the magma cooled no faster than 2 °C/h based on the polyhedral morphology of olivine. Comparison of olivine size with crystal growth rates and preserved Fe‐Mg diffusion profiles in olivine phenocrysts suggest that olivine was immersed in the melt for no more than 40 days. Plumose textures in groundmass pyroxene, feldspar, and ilmenite, and Fe‐rich rims on the phenocrysts formed during rapid crystallization (cooling rates ?20 to 60 °C/h) after eruption.     

Exploring the Moon's surface for remnants of the lunar mantle 1. Dunite xenoliths in mare basalts. A crustal or mantle origin?

Remotely sensed observations from recent missions (e.g., GRAIL, Kaguya, Chandrayaan‐1) have been interpreted as indicating that the deep crust and upper mantle are close to or at the lunar surface in many large impact basins (e.g., Crisium, Apollo, Moscoviense). If this is correct, the capability of either impact or volcanic processes to transport mantle lithologies to the lunar surface should be enhanced in these regions. Somewhat problematic to these observations and interpretations is that examples of mantle lithologies in the lunar sample collection (Apollo Program, Luna Program, lunar meteorites) are at best ambiguous. Dunite xenoliths in high‐Ti mare basalt 74275 are one of these ambiguous examples. In this high‐Ti mare basalt, olivine occurs in three generations: olivine associated with dunite xenoliths, olivine megacrysts, and olivine microphenocrysts. The dunite xenoliths are anhedral in shape and are generally greater than 800 μm in diameter. The interior of the xenoliths are fairly homogeneous with regard to many divalent cations. For example, the Mg# (Mg/Mg + Fe × 100) ranges from 82 to 83 in their interiors and decreases from 82 to 68 over the 10–30 μm wide outer rim. Titanium and phosphorus X‐ray maps of the xenolith illustrate that these slow diffusing elements preserve primary cumulate zoning textures. These textures indicate that the xenoliths consist of many individual olivine grains approximately 150–200 μm in diameter with low Ti, Al, and P cores. These highly incompatible elements are enriched in the outer Fe‐rich rims of the xenoliths and slightly enriched in the rims of the individual olivine grains. Highly compatible elements in olivine such as Ni exhibit a decrease in the rim surrounding the xenolith, an increase in the incompatible element depleted cores of the individual olivine grains, and a slight decrease in the “interior rims” of the individual olivine grains. Inferred melt composition, liquid lines of descent, and zoning profiles enable the reconstruction of the petrogenesis of the dunite xenoliths. Preservation of primary magmatic zoning (Ti, P, Al) and lack of textures similar to high‐pressure mineral assemblages exhibited by the Mg‐suite (Shearer et al. 2015) indicate that these xenoliths do not represent deep crustal or shallow mantle lithologies. Further, they are chemically and mineralogically distinct from Mg‐suite dunites identified from the Apollo 17 site. More likely, they represent olivine cumulates that crystallized from a low‐Ti mare basalt at intermediate to shallow crustal levels. The parent basalt to the dunite xenolith lithology was more primitive than low‐Ti basalts thus far returned from the Moon. Furthermore, this parental magma and its more evolved daughter magmas are not represented in the basalt sample suite returned from the Taurus‐Littrow Valley by the Apollo 17 mission. The dunite xenolith records several episodes of crystallization and re‐equilibration. During the last episode of re‐equilibration, the dunite cumulate was sampled by the 74275 high‐Ti basalt and transported over a period of 30–70 days to the lunar surface.     

A petrological,mineralogical, and chemical analysis of the lunar mare basalt meteorite LaPaz Icefield 02205, 02224, and 02226

Abstract— LaPaz Icefield (LAP) 02205, 02226, and 02224 are paired stones of a crystalline basaltic lunar meteorite with a low‐Ti (3.21–3.43% TiO₂) low‐Al (9.93–10.45% Al₂O₃), and low‐K (0.11–0.12% K₂O) composition. They consist mainly of zoned pyroxene and plagioclase grains, with minor ilmenite, spinel, and mesostasis regions. Large, possibly xenocrystic, forsteritic olivine grains (<3% by mode) contain small trapped multiphase melt inclusions. Accessory mineral and mesostasis composition shows that the samples have experienced residual melt crystallization with silica oversaturation and late‐stage liquid immiscibility. Our section of LAP 02224 has a vesicular fusion crust, implying that it was at one time located sufficiently close to the lunar surface environment to have accumulated solar‐wind‐implanted gases. The stones have a comparable major element composition and petrography to low‐Ti, low‐Al basalts collected at the Apollos 12 and 15 landing sites. However, the LAP stones also have an enriched REE bulk composition and are more ferroan (Mg numbers in the range of 31 to 35) than similar Apollo samples, suggesting that they represent members of a previously unsampled fractionated mare basalt suite that crystallized from a relatively evolved lunar melt.     

KREEPy lunar meteorite Dhofar 287A: A new lunar mare basalt

Abstract— Dhofar 287 (Dho 287) is a new lunar meteorite, found in Oman on January 14, 2001. The main portion of this meteorite (Dho 287A) consists of a mare basalt, while a smaller portion of breccia (Dho 287B) is attached on the side. Dho 287A is only the fourth crystalline mare basalt meteorite found on Earth to date and is the subject of the present study. The basalt consists mainly of phenocrysts of olivine and pyroxene set in a finer‐grained matrix, which is composed of elongated pyroxene and plagioclase crystals radiating from a common nucleii. The majority of olivine and pyroxene grains are zoned, from core to rim, in terms of Fe and Mg. Accessory minerals include ilmenite, chromite, ulvöspinel, troilite, and FeNi metal. Chromite is invariably mantled by ulvöspinel. This rock is unusually rich in late‐stage mesostasis, composed largely of fayalite, Si‐K‐Ba‐rich glass, fluorapatite, and whitlockite. In texture and mineralogy, Dho 287A is a low‐Ti mare basalt, with similarities to Apollo 12 (A‐12) and Apollo 15 (A‐15) basalts. However, all plagioclase is now present as maskelynite, and its composition is atypical for known low‐Ti mare basalts. The Fe to Mn ratios of olivine and pyroxene, the presence of FeNi metal, and the bulk‐rock oxygen isotopic ratios, along with several other petrological features, are evidence for the lunar origin for this meteorite. Whole‐rock composition further confirms the similarity of Dho 287A with A‐12 and A‐15 samples but requires possible KREEP assimilation to account for its rare‐earth‐element (REE) contents. Cooling‐rate estimates, based on Fo zonation in olivine, yield values of 0.2–0.8°C/hr for the lava, typical for the center of a 10–20 m thick flow. The recalculated major‐element concentrations, after removing 10–15% modal olivine, are comparable to typical A‐15 mare basalts. Crystallization modeling of the recalculated Dho 287A bulk‐composition yields a reasonable fit between predicted and observed mineral abundances and compositions.     

Petrology and provenance of a very‐low‐titanium picrite clast in lunar highland regolith breccia 15295

Clast 100 in regolith breccia 15295 could be a key to resolving the relationship(s) between mare basalts and lunar picritic glasses. The clast is basaltic, with texture, mineralogy, mineral compositions, and calculated bulk composition suggesting that it crystallized in a thick lava flow or shallow intrusive body from a very‐low‐titanium (VLT) basaltic magma. The estimated bulk composition of clast 15295,100 is primitive (i.e., magnesian) compared to those of known VLT basalts, and is very close to those of VLT picritic green glasses, especially the Apollo 14 A green glass. From these similarities, we infer that clast 15295,100 is a crystalline product of a picritic magma similar to the Apollo 14 A glass. Clementine and M³ remotely sensed data of the lunar surface were used to find areas that have chemical compositions consistent with those of clast 15295,100, not only near the Apollo 15 site, but in a broad region surrounding the site. Two regions are consistent with clast's 15295,100 compositional data. The larger region is in southern Mare Imbrium, and a smaller region is in the eastern half of Sinus Aestuum. These locations should be considered as candidates for future missions focusing on sample science.     

Basait generation at the Apollo 12 site,Part 2: Source heterogeneity,multiple melts,and crustal contamination

Abstract— The petrogenesis of Apollo 12 mare basalts has been examined with emphasis on trace-element ratios and abundances. Vitrophyric basalts were used as parental compositions for the modelling, and proportions of fractionating phases were determined using the MAGFOX program of Longhi (1991). Crystal fractionation processes within crustal and sub-crustal magma chambers are evaluated as a function of pressure. Knowledge of the fractionating phases allows trace-element variations to be considered as either source related or as a product of post-magma-generation processes. For the ilmenite and olivine basalts, trace-element variations are inherited from the source, but the pigeonite basalt data have been interpreted with open-system evolution processes through crustal assimilation. Three groups of basalts have been examined: (1) Pigeonite basalts — produced by the assimilation of lunar crustal material by a parental melt (up to 3% assimilation and 10% crystal fractionation, with an “r” value of 0.3). (2) Ilmenite basalts — produced by variable degrees of partial melting (4–8%) of a source of olivine, pigeonite, augite, and plagioclase, brought together by overturn of the Lunar Magma Ocean (LMO) cumulate pile. After generation, which did not exhaust any of the minerals in the source, these melts experienced closed-system crystal fractionation/accumulation. (3) Olivine basalts — produced by variable degrees of partial melting (5–10%) of a source of olivine, pigeonite, and augite. After generation, again without exhausting any of the minerals in the source, these melts evolved through crystal accumulation. The evolved liquid counterparts of these cumulates have not been sampled. The source compositions for the ilmenite and olivine basalts were calculated by assuming that the vitrophyric compositions were primary and the magmas were produced by non-modal batch melting. Although the magnitude is unclear, evaluation of these source regions indicates that both be composed of early- and late-stage Lunar Magma Ocean (LMO) cumulates, requiring an overturn of the cumulate pile.     

A distinct variant of high-titanium mare basalt from the Van Serg core,Apollo 17 landing site

Abstract— A fragment of basalt picked from the drive tube collected at Van Serg crater at the Apollo 17 landing site has a bulk chemistry more primitive than that of other high-titanium mare basalt groups collected at the site. The sample has a fine-grained olivine phyric, subophitic texture that is distinct from that of other high-titanium basalt samples. The grain size and texture suggest that the sample has a composition close to that of a magma. The crystallization sequence, with appearance of oxide minerals later than in other groups, and other petrographic features such as more-calcic plagioclase and early pigeonite rather than augite, are consistent with this sample representing a distinct variant of Apollo 17 high-titanium basalts. It is not related through closed-system igneous processes to any of the other mare basalt groups identified among Apollo 17 samples. Its characters emphasize the complexity of contemporaneous magma processes on the Moon and the heterogeneity of that part of the mantle that was melted.     

On the compositions and characteristics of the mare basalt magmas and their source regions

Based on a synthesis of available mare basalt data, it is shown that the samples which were returned to Earth via the various Apollo and Luna missions were derived from at least 16 separate eruptive events. The currently published data are sufficient to allow reasonably good estimates of the compositions of the parental magmas of 12 of these units to be made. At the present, only first order estimates of the compositions of the magmas of the remaining four units are possible.It is further shown that, when these 16 magmas are plotted on the pseudo-ternary phase diagram for the system anorthite-olivine-quartz and the quaternary phase diagrams for the systems which include augite or ilmenite, the magmas all lie along a common, equilibrium melting path. This path is defined by the high aluminum basalt magmas and the majority of the high TiO₂ basalt magmas which plot near the 5kb olivine-pyroxene cotectic and by the high olivine magmas which plot along or near a single olivine control line. The fact that all the high olivine magmas plot near a single olivine control line is a direct consequence of the equilibrium partial melting of an olivine dominated mantle, but is statistically very unlikely (1 chance in 10⁶) if the mantle is dominated by pyroxene as is widely accepted. Based on the reasonable assumption that the degree of partial melting which produced the magmas was no greater than 50%, and noting that the composition of the mantle is constrained to lie on the olivine control line around which the high olivine magmas plot in the ternary and quaternary phase diagrams, then the normative composition of the lunar upper mantle must be about 64% olivine (Fo₇₀), 23% pyroxene, 9% anorthite, and 4% ilmenite - though olivine richer models are possible. This composition is essentially the same as that for pyrolite, the proposed composition of the Earth's mantle. This observation is taken to add further support for the fission origin of the Moon.     

Mineralogy and petrology of the LaPaz Icefield lunar mare basaltic meteorites

Abstract— Five basaltic meteorites from the LaPaz ice field are paired on the basis of their mineralogy and texture, and represent a unique basalt type distinct from those in the Apollo or Luna sample collections. LaPaz Icefield (LAP) 02205, LAP 02224, LAP 02226, LAP 02436 and LAP 03632 all contain plagioclase, pyroxene, ilmenite, spinel, olivine, and minor troilite, metal, phosphate, baddeleyite and silica (cristobalite). Brown glassy melt veins are ubiquitous and cross the primary igneous texture. Plagioclase, the major mineral and occurring as laths in a subophitic texture, is of narrow compositional range, from An_85–89. Pyroxene, also a major mineral, is strongly zoned, from augite and pigeonite cores to very iron‐rich rims. Ilmenite laths comprise approximately 3–5% of the basalts. Spinels show a large compositional range, comparable to that documented in Apollo 15 basalts, indicating an early chromite‐rich stage followed by an intermediate to late stage with Cr‐rich ulvöspinel. Relatively large, subhedral to skeletal olivine crystals (Fo_46–62) are sparse, and are too Forich to be in equilibrium with the bulk rock, indicating that these are xenocrysts rather than phenocrysts. The presence of melt veins with a similar composition to the bulk rock, maskelynitized plagioclase feldspar, and metastable cristobalite indicate that these rocks underwent significant shock, between 30 and 50 GPa. Calculated oxygen fugacity, using spinel‐ilmenite‐iron metal equilibria, is within the range defined by previous studies of lunar materials. The bulk composition (low MgO) and low calculated temperatures, together with modelling calculations, indicate an origin by fractional crystallization of a more primitive low TiO₂ parent liquid similar to Apollo 12 olivine basalt.     

Lunar regolith breccia Dhofar 287B: A record of lunar volcanism

Abstract— Dhofar 287 (Dho 287), a recently found lunar meteorite, consists in large part (95%) of low‐Ti mare basalt (Dho 287A) and a minor, attached portion (?5%) of regolith breccia (Dho 287B). The present study is directed mainly at the breccia portion of this meteorite. This breccia consists of a variety of lithic clasts and mineral fragments set in a fine‐grained matrix and minor impact melt. The majority of clasts and minerals appear to have been mainly derived from the low‐Ti basalt suite, similar to that of Dho 287A. Very low‐Ti (VLT) basalts are a minor lithology of the breccia. These are significantly lower in Mg# and slightly higher in Ti compared to Luna 24 and Apollo 17 VLT basalts. Picritic glasses constitute another minor component of the breccia and are compositionally similar to Apollo 15 green glasses. Dho 287B also contains abundant fragments of Mg‐rich pyroxene and anorthite‐rich plagioclase grains that are absent in the lithic clasts. Such fragments appear to have been derived from a coarse‐grained, Mg#‐rich, Na‐poor lithology. A KREEP component is apparent in chemistry, but no highlands lithologies were identified. The Dho 287 basaltic lithologies cannot be explained by near‐surface fractionation of a single parental magma. Instead, magma compositions are represented by a picritic glass; a low‐Ti, Na‐poor glass; and a low‐Ti, Na‐enriched source (similar to the Dho 287A parental melt). Compositional differences among parent melts could reflect inhomogeneity of the lunar mantle. Alternatively, the low‐Ti, Na‐poor, and Dho 287A parent melts could be of hybrid compositions, resulting from assimilation of KREEP by picritic magma. Thus, the Dho 287B breccia contains lithologies from multiple magmatic eruptions, which differed in composition, formational conditions, and cooling histories. Based on this study, the Dho 287 is inferred to have been ejected from a region located distal to highlands terrains, possibly from the western limb of the lunar nearside, dominated by mare basalts and KREEP‐rich lithologies.     

Petrography,relationships, and petrogenesis of the gabbroic lithologies in Northwest Africa 773 clan members Northwest Africa 773, 2727, 3160, 3170, 7007, and 10656

The Northwest Africa (NWA) 773 clan of lunar meteorite stones are coarse‐grained breccias that provide an opportunity to examine a lunar igneous system that includes inferred intrusive and extrusive lithologies, possibly related through a common liquid line of descent from a single source region. Such extensive sampling of a single very low‐Ti (VLT) magmatic system on the Moon is unprecedented among the lunar samples. This study focuses on the olivine gabbro (OG), anorthositic gabbro (AG), and ferroan gabbro (FG) lithologies variably contained in NWA 773, NWA 2727, NWA 3160, NWA 3170, NWA 7007, and NWA 10656. Mineral compositions in the three gabbros indicate the crystallization sequence OG → AG → FG. Petrologic modeling of these three lithologies, and an olivine phyric basalt that also occurs in the NWA 773 clan, however, suggests that the relationship among the lithologies is more complex. The OG and basalt can be modeled as originating from a VLT KREEP‐bearing parental melt similar to the Apollo 14 Green Glass b1 composition through mainly equilibrium crystallization. The AG and FG, however, do not fit this simple model and require either a more complex crystallization sequence involving fractional crystallization, magma chamber recharge, or perhaps heterogeneity in the source region.     

Searching for high alumina mare basalts using Clementine UVVIS and Lunar Prospector GRS data: Mare Fecunditatis and Mare Imbrium

In the context of sample evidence alone, the high-alumina (HA) basalts appear to be an unique, and rare variety of mare basalt. In addition to their distinct chemistry, radiometric dating reveals these basalts to be among the oldest sampled mare basalts. Yet, HA basalts were sampled by four missions spanning a lateral range of ∼2400 km, with ages demonstrating that aluminous volcanism lasted at least 1 billion years. This evidence suggests that HA basalts may be a widespread phenomenon on the Moon. Knowing the distribution of HA mare basalts on the lunar surface has significance for models of the origin and the evolution of the Lunar Magma Ocean. Surface exposures of HA basalts can be detected with compositional remote sensing data from Lunar Prospector Gamma Ray Spectrometer and Clementine. We searched the lunar surface for regions of interest (ROIs) that correspond to the intersection of three compositional constraints taken from values of sampled HA basalts: 12-18 wt% FeO, 1.5-5 wt% TiO₂, and 0-4 ppm Th. We then determined the “true” (unobscured by regolith) composition of basalt units by analyzing the rims and proximal ejecta of small impacts (0.4-4 km in diameter) into the mare surface of these ROIs. This paper focuses on two ROIs that are the best candidates for sources of sampled HA basalts: Mare Fecunditatis, the landing site of Luna 16; and northern Mare Imbrium, hypothesized origin of the Apollo 14 HA basalts. We demonstrate our technique's ability for delineating discrete basalt units and determining which is the best compositional match to the HA basalts sampled by each mission. We identified two units in Mare Fecunditatis that spectrally resemble HA basalts, although only one unit (Iltm) is consistent with the compositional and relative age of the Luna 16 HA samples. Northern Mare Imbrium also reveals two units that are within the compositional constraints of HA basalts, with one (Iltm) best matching the composition of the basalts sampled by Apollo 14.     

Spectral characteristics of lunar impact melts and inferred mineralogy

Abstract– Two suites of lunar impact melt samples have been measured in NASA’s Reflectance Experiment Laboratory (RELAB) at Brown University. Suite 1 comprises seven Apollo 17 crystalline impact melt breccias and seven quenched glass equivalents. Suite 2 is made up of 15 additional impact melt samples (from Apollo 12, 15, 16, and 17) which exhibit a range of textures and compositions related to cooling conditions and glass abundance. A few of these samples have cooled slowly and fully crystallized, and thus have the same spectral properties as igneous rocks of similar texture and composition; they cannot be uniquely distinguished without geologic context. However, most of the impact melts and melt breccias contain either quantities of quenched glass and/or have developed microcrystalline nonequilibrium textures with well‐defined, diagnostic spectral properties. The microcrystalline textures are associated with a distinctive 600 nm absorption feature, apparently due to submicroscopic ilmenite inclusions in a transparent host (typically fine‐grained plagioclase). The reflectance properties of these lunar sample suites contribute to and constrain the identification and characterization of impact melts in remote sensing data.