The petrology,geochemistry, and age of lunar regolith breccias Miller Range 090036 and 090070: Insights into the crustal history of the Moon

Meteorites ejected from the surface of the Moon as a result of impact events are an important source of lunar material in addition to Apollo and Luna samples. Here, we report bulk element composition, mineral chemistry, age, and petrography of Miller Range (MIL) 090036 and 090070 lunar meteorites. MIL 090036 and 090070 are both anorthositic regolith breccias consisting of mineral fragments and lithic clasts in a glassy matrix. They are not paired and represent sampling of two distinct regions of the lunar crust that have protoliths similar to ferroan anorthosites. ⁴⁰Ar‐³⁹Ar chronology performed on two subsplits of MIL 090070,33 (a pale clast impact melt and a dark glassy melt component) shows that the sample underwent two main degassing events, one at ~3.88 Ga and another at ~3.65 Ga. The cosmic ray exposure data obtained from MIL 090070 are consistent with a short (~8–9 Ma) exposure close to the lunar surface. Bulk‐rock FeO, TiO₂, and Th concentrations in both samples were compared with 2‐degree Lunar Prospector Gamma Ray Spectrometer (LP‐GRS) data sets to determine areas of the lunar surface where the regolith matches the abundances observed on the sample. We find that MIL 090036 bulk rock is compositionally most similar to regolith surrounding the Procellarum KREEP Terrane, whereas MIL 090070 best matches regolith in the feldspathic highlands terrane on the lunar farside. Our results suggest that some areas of the lunar farside crust are composed of ferroan anorthosite, and that the samples shed light on the evolution and impact bombardment history of the ancient lunar highlands.     

“New” lunar meteorites: Impact melt and regolith breccias and large‐scale heterogeneities of the upper lunar crust

Abstract— We have analyzed nine highland lunar meteorites (lunaites) using mainly INAA. Several of these rocks are difficult to classify. Dhofar 081 is basically a fragmental breccia, but much of its groundmass features a glassy‐fluidized texture that is indicative of localized shock melting. Also, much of the matrix glass is swirly‐brown, suggesting a possible regolith derivation. We interpret Dar al Gani (DaG) 400 as an extremely immature regolith breccia consisting mainly of impact‐melt breccia clasts; we interpret Dhofar 026 as an unusually complex anorthositic impact‐melt breccia with scattered ovoid globules that formed as clasts of mafic, subophitic impact melt. The presence of mafic crystalline globules in a lunar material, even one so clearly impact‐heated, suggests that it may have originated as a regolith. Our new data and a synthesis of literature data suggest a contrast in Al₂O₃‐incompatible element systematics between impact melts from the central nearside highlands, where Apollo sampling occurred, and those from the general highland surface of the Moon. Impact melts from the general highland surface tend to have systematically lower incompatible element concentration at any given Al₂O₃ concentration than those from Apollo 16. In the case of Dhofar 026, both the bulk rock and a comparatively Al‐poor composition (14 wt% Al₂O₃, 7 μg/g Sm) extrapolated for the globules, manifest incompatible element contents well below the Apollo 16 trend. Impact melts from Luna 20 (57°E) distribute more along the general highland trend than along the Apollo 16 trend. Siderophile elements also show a distinctive composition for Apollo 16 impact melts: Ni/Ir averaging ?1.8x chondritic. In contrast, lunaite impact‐melt breccias have consistently chondritic Ni/Ir. Impact melts from Luna 20 and other Apollo sites show average Ni/Ir almost as high as those from Apollo 16. The prevalence of this distinctive Ni/Ir ratio at such widely separated nearside sites suggests that debris from one extraordinarily large impact may dominate the megaregolith siderophile component of a nearside region 2300 km or more across. Highland polymict breccia lunaites and other KREEP‐poor highland regolith samples manifest a strong anticorrelation between Al₂O₃ and mg. The magnesian component probably represents the chemical signature of the Mg‐suite of pristine nonmare rocks in its most “pure” form, unaltered by the major KREEP‐assimilation that is so common among Apollo Mg‐suite samples. The average composition of the ferroan anorthositic component is now well constrained at Al₂O₃ ?29–30 wt% (implying about 17–19 wt% modal mafic silicates), in good agreement with the composition predicted for flotation crust over a “ferroan” magma ocean (Warren 1990).     

The regolith portion of the lunar meteorite Sayh al Uhaymir 169

Abstract— –Sayh al Uhaymir (SaU) 169 is a composite lunar meteorite from Oman that consists of polymict regolith breccia (8.44 ppm Th), adhering to impact‐melt breccia (IMB; 32.7 ppm Th). In this contribution we consider the regolith breccia portion of SaU 169, and demonstrate that it is composed of two generations representing two formation stages, labeled II and III. The regolith breccia also contains the following clasts: Ti‐poor to Ti‐rich basalts, gabbros to granulites, and incorporated regolith breccias. The average SaU 169 regolith breccia bulk composition lies within the range of Apollo 12 and 14 soil and regolith breccias, with the closest correspondence being with that of Apollo 14, but Sc contents indicate a higher portion of mare basalts. This is supported by relations between Sm‐Al₂O₃, FeO‐Cr₂O₃‐TiO₂, Sm/Eu and Th‐K₂O. The composition can best be modeled as a mixture of high‐K KREEP, mare basalt and norite/troctolite, consistent with the rareness of anorthositic rocks. The largest KREEP breccia clast in the regolith is identical in its chemical composition and total REE content to the incompatible trace‐element (ITE)‐ rich high‐K KREEP rocks of the Apollo 14 landing site, pointing to a similar source. In contrast to Apollo 14 soil, SaU 169 IMB and SaU 169 KREEP breccia clast, the SaU 169 regolith is not depleted in K/Th, indicating a low contribution of high‐Th IMB such as the SaU 169 main lithology in the regolith. The data presented here indicate the SaU 169 regolith breccia is from the lunar front side, and has a strong Procellarum KREEP Terrane signature.     

The early geological history of the Moon inferred from ancient lunar meteorite Miller Range 13317

Miller Range (MIL) 13317 is a heterogeneous basalt‐bearing lunar regolith breccia that provides insights into the early magmatic history of the Moon. MIL 13317 is formed from a mixture of material with clasts having an affinity to Apollo ferroan anorthosites and basaltic volcanic rocks. Noble gas data indicate that MIL 13317 was consolidated into a breccia between 2610 ± 780 Ma and 1570 ± 470 Ma where it experienced a complex near‐surface irradiation history for ~835 ± 84 Myr, at an average depth of ~30 cm. The fusion crust has an intermediate composition (Al₂O₃ 15.9 wt%; FeO 12.3 wt%) with an added incompatible trace element (Th 5.4 ppm) chemical component. Taking the fusion crust to be indicative of the bulk sample composition, this implies that MIL 13317 originated from a regolith that is associated with a mare‐highland boundary that is KREEP‐rich (i.e., K, rare earth elements, and P). A comparison of bulk chemical data from MIL 13317 with remote sensing data from the Lunar Prospector orbiter suggests that MIL 13317 likely originated from the northwest region of Oceanus Procellarum, east of Mare Nubium, or at the eastern edge of Mare Frigoris. All these potential source areas are on the near side of the Moon, indicating a close association with the Procellarum KREEP Terrane. Basalt clasts in MIL 13317 are from a very low‐Ti to low‐Ti (between 0.14 and 0.32 wt%) source region. The similar mineral fractionation trends of the different basalt clasts in the sample suggest they are comagmatic in origin. Zircon‐bearing phases and Ca‐phosphate grains in basalt clasts and matrix grains yield ²⁰⁷Pb/²⁰⁶Pb ages between 4344 ± 4 and 4333 ± 5 Ma. These ancient ²⁰⁷Pb/²⁰⁶Pb ages indicate that the meteorite has sampled a range of Pre‐Nectarian volcanic rocks that are poorly represented in the Apollo, Luna, and lunar meteorite collections. As such, MIL 13317 adds to the growing evidence that basaltic volcanic activity on the Moon started as early as ~4340 Ma, before the main period of lunar mare basalt volcanism at ~3850 Ma.     

Chemistry of the Calcalong Creek lunar meteorite and its relationship to lunar terranes

Abstract— The Calcalong Creek lunar meteorite is a polymict breccia that contains clasts of both highlands and mare affinity. Reported here is a compilation of major, minor, and trace element data for bulk, clast, and matrix samples determined by instrumental neutron activation analysis (INAA). Petrographic information and results of electron microprobe analyses are included. The relationship of Calcalong Creek to lunar terranes, especially the Procellarum KREEP Terrane and Feldspathic Highlands Terrane, is established by the abundance of thorium, incompatible elements and their KREEP‐like CI chondrite normalized pattern, FeO, and TiO₂. The highlands component is associated with Apollo 15 KREEP basalt but represents a variant of the KREEP‐derived material widely found on the moon. Sources of Calcalong Creek's mare basalt components may be related to low‐titanium (LT) and very low‐titanium (VLT) basalts seen in other lunar meteorites but do not sample the same source. The content of some components of Calcalong Creek are found to display similarities to the composition of the South Pole‐Aitken Terrane. What appear to be VLT relationships could represent new high aluminum, low titanium basalt types.     

Constraining the source regions of lunar meteorites using orbital geochemical data

Lunar meteorites provide important new samples of the Moon remote from regions visited by the Apollo and Luna sample return missions. Petrologic and geochemical analysis of these meteorites, combined with orbital remote sensing measurements, have enabled additional discoveries about the composition and age of the lunar surface on a global scale. However, the interpretation of these samples is limited by the fact that we do not know the source region of any individual lunar meteorite. Here, we investigate the link between meteorite and source region on the Moon using the Lunar Prospector gamma ray spectrometer remote sensing data set for the elements Fe, Ti, and Th. The approach has been validated using Apollo and Luna bulk regolith samples, and we have applied it to 48 meteorites excluding paired stones. Our approach is able broadly to differentiate the best compositional matches as potential regions of origin for the various classes of lunar meteorites. Basaltic and intermediate Fe regolith breccia meteorites are found to have the best constrained potential launch sites, with some impact breccias and pristine mare basalts also having reasonably well‐defined potential source regions. Launch areas for highland feldspathic meteorites are much less well constrained and the addition of another element, such as Mg, will probably be required to identify potential source regions for these.     

Multiple lithic clasts in lunar breccia Northwest Africa 7948 and implication for the lithologic components of lunar crust

This study presents the petrography, mineralogy, and bulk composition of lunar regolith breccia meteorite Northwest Africa (NWA) 7948. We identify a range of lunar lithologies including basaltic clasts (very low-titanium and low-titanium basalts), feldspathic lithologies (ferroan anorthosite, magnesian-suite rock, and alkali suite), granulites, impact melt breccias (including crystalline impact melt breccias, clast-bearing impact melt breccias, and glassy melt breccias), as well as regolith components (volcanic glass and impact glass). A compositionally unusual metal-rich clast was also identified, which may represent an impact melt lithology sourced from a unique Mg-suite parent rock. NWA 7948 has a mingled bulk rock composition (Al₂O₃ = 21.6 wt% and FeO = 9.4 wt%) and relatively low concentrations of incompatible trace elements (e.g., Th = 1.07 ppm and Sm = 2.99 ppm) compared with Apollo regolith breccias. Comparing the bulk composition of the meteorite with remotely sensed geochemical data sets suggests that the sample was derived from a region of the lunar surface distal from the nearside Th-rich Procellarum KREEP Terrane. Our investigations suggest that it may have been ejected from a nearside highlands-mare boundary (e.g., around Mare Crisium or Orientale) or a cryptomare region (e.g., Schickard-Schiller or Mare smythii) or a farside highlands-mare boundary (e.g., Mare Australe, Apollo basin in the South Pole–Aitken basin). The distinctive mineralogical and geochemical features of NWA 7948 suggest that the meteorite may represent lunar material that has not been reported before, and indicate that the lunar highlands exhibit wide geological diversity.     

Regolith thickness over the lunar nearside: Results from Earth-based 70-cm Arecibo radar observations

The inversion of regolith thickness over the nearside hemisphere of the Moon from newly acquired Earth-based 70-cm Arecibo radar data is investigated using a quantitative radar scattering model. The radar scattering model takes into account scattering from both the lunar surface and buried rocks in the lunar regolith, and three parameters are critically important in predicting the radar backscattering coefficient: the dielectric constant of the lunar regolith, the surface roughness, and the size and abundance of subsurface rocks. The measured dielectric properties of the Apollo regolith samples at 450 MHz are re-analyzed, and an improved relation among the complex dielectric constant, bulk density and regolith composition is obtained. The complex dielectric constant of the lunar regolith is estimated globally from this relation using the regolith composition derived from Lunar Prospector gamma-ray spectrometer data. To constrain the lunar surface roughness and abundance of subsurface rocks from radar data, nine regions are selected as calibration sites where the regolith thickness has been estimated using independent analysis techniques. For these sites, scattering from the lunar surface and buried rocks cannot be perfectly distinguished, and a tradeoff relationship exists between the size and abundance of buried rocks and surface roughness. Using these tradeoff relations as guidelines for globally representative parameters, the regolith thickness of four regions over the lunar nearside is inverted, and the inversion uncertainties caused by calibration errors of the radar data and model input parameters are analyzed. The regolith thickness of the maria is generally smaller than that of highlands, and older surfaces have thicker regolith thicknesses. Our approach cannot be applied to regions where the surface roughness is very high, such as with young rocky craters and regions in the highly rugged highlands.     

Petrography and geochemistry of lunar meteorites Dhofar 1673, 1983, and 1984

The Dhofar 1673, Dhofar 1983, and Dhofar 1984 meteorites are three lunar regolith breccias classified based on their petrography, mineralogy, oxygen isotopes, and bulk chemistry. All three meteorites are dominated by feldspathic lithic clasts; however, impact melt rock clasts and spherules are also found in each meteorite. The bulk chemistry of these samples is similar to other feldspathic highland meteorites with the Al₂O₃ content only slightly lower than average. Within the lithic clasts, the Mg # of mafic phases versus the anorthite content of feldspars is similar to other highland meteorites and is found to plot intermediate of the ferroan‐anorthositic suite and magnesian suite. The samples lack any KREEPy signature and have only minor indications of a mare basalt component, suggesting that the source region of all three meteorites would have been distal from the Procellarum KREEP Terrane and could have possibly been the Feldspathic Highland Terrane. All three meteorites were found within 500 m of each other in the Dhofar region of Oman. This, together with their similar petrography, stable isotope chemistry, and geochemistry indicates the possibility of a pairing.     

Compositional and lithological diversity among brecciated lunar meteorites of intermediate iron concentration

Abstract— We present new compositional data for 30 lunar stones representing about 19 meteorites. Most have iron concentrations intermediate to those of the numerous feldspathic lunar meteorites (3–7% FeO) and the basaltic lunar meteorites (17–23% FeO). All but one are polymict breccias. Some, as implied by their intermediate composition, are mainly mixtures of brecciated anorthosite and mare basalt, with low concentrations of incompatible elements such as Sm (1–3 μg/g). These breccias likely originate from points on the Moon where mare basalt has mixed with material of the FHT (Feldspathic Highlands Terrane). Others, however, are not anorthosite‐basalt mixtures. Three (17–75 μ/g Sm) consist mainly of nonmare mafic material from the nearside PKT (Procellarum KREEP Terrane) and a few are ternary mixtures of material from the FHT, PKT, and maria. Some contain mafic, nonmare lithologies like anorthositic norites, norites, gabbronorites, and troctolite. These breccias are largely unlike breccias of the Apollo collection in that they are poor in Sm as well as highly feldspathic anorthosite such as that common at the Apollo 16 site. Several have high Th/Sm compared to Apollo breccias. Dhofar 961, which is olivine gabbronoritic and moderately rich in Sm, has lower Eu/Sm than Apollo samples of similar Sm concentration. This difference indicates that the carrier of rare earth elements is not KREEP, as known from the Apollo missions. On the basis of our present knowledge from remote sensing, among lunar meteorites Dhofar 961 is the one most likely to have originated from South Pole‐Aitken basin on the lunar far side.     

Petrogenesis of lunar mare basalt meteorite Miller Range 05035

Abstract— Miller Range (MIL) 05035 is a low‐Ti mare basalt that consists predominantly of pyroxene (62.3 vol%) and plagioclase (26.4 vol%). Pyroxenes are strongly shocked and complexly zoned from augite (Wo₃₃) and pigeonite (Wo₁₇) cores with Mg# = 50–54 to hedenbergite rims. Coexisting pyroxene core compositions reflect crystallization temperatures of 1000 to 1100 °C. Plagioclase has been completely converted to maskelynite with signs of recrystallization. Maskelynite is relatively uniform in composition (An₉₄Ab₆–An₉₁Ab₉), except at contacts with late‐stage mesostasis areas (elevated K contents, An₈₂Ab₁₅Or₃). Symplectites (intergrowth of Fe‐augite, fayalite, and silica) of different textures and bulk compositions in MIL 05035 suggest formation by decomposition of ferro‐pyroxene during shock‐induced heating, which is supported by the total maskelynitization of plagioclase, melt pockets, and the presence of a relict pyroxferroite grain. Petrography and mineral chemistry imply that crystallization of MIL 05035 occurred in the sequence of Fe‐poor pyroxenes (Mg# = 50–54), followed by plagioclase and Fe‐rich pyroxenes (Mg# = 20–50), and finally hedenbergite, Fe‐Ti oxides, and minor late‐stage phases. Petrography, bulk chemistry, mineral compositions, and the age of MIL 05035 suggest it is possibly source crater‐paired with Asuka (A‐) 881757 and Yamato (Y‐) 793169, and may also be launch‐paired with Meteorite Hills (MET) 01210. MIL 05035 represents an old (?3.8–3.9 Ga), incompatible element‐depleted low‐Ti basalt that was not sampled during the Apollo or Luna missions. The light‐REE depleted nature and lack of Eu anomalies for this meteorite are consistent with an origin distant from the Procellarum KREEP Terrane, and genesis from an early cumulate mantle‐source region generated by extensive differentiation of the Moon.     

New lunar meteorite NWA 10986: A mingled impact melt breccia from the highlands—A complete cross section of the lunar crust

Northwest Africa (NWA) 10986 is a new mingled lunar meteorite found in 2015 in Western Sahara. This impact melt breccia contains abundant impact melt glass and clasts as large as 0.75 mm. Clasts are predominantly plagioclase and pyroxene‐rich and represent both highland and basalt lithologies. Highland lithologies include troctolites, gabbronorites, anorthositic norites, and troctolitic anorthosites. Basalt lithologies include crystalline clasts with large zoned pyroxenes representing very low titanium to low titanium basalts. In situ geochemical analysis of minerals within clasts indicates that they represent ferroan anorthosite, Mg‐suite, and gabbronorite lithologies as defined by the Apollo sample collection. Clasts representing magnesian anorthosite, or “gap” lithologies, are prevalent in this meteorite. Whole rock and in situ impact glass measurements indicate low incompatible trace element concentrations. Basalt clasts also have low incompatible trace element concentrations and lack evolved KREEP mineralogy although pyroxferroite grains are present. The juxtaposition of evolved, basaltic clasts without KREEP signatures and highland lithologies suggests that these basaltic clasts may represent cryptomare. The lithologies found in NWA 10986 offer a unique and possibly a complete cross section view of the Moon sourced outside of the Procellarum KREEP Terrane.     

An integrated approach to understanding Apollo 16 impact glasses: Chemistry,isotopes, and shape

Abstract The major‐ and minor‐element abundances were determined by electron microprobe in 1039 glasses from regoliths and regolith breccias to define the compositional topology of lunar glasses at the Apollo 16 landing site in the central highlands of the Moon. While impact glasses with chemical compositions similar to local materials (i.e., Apollo 16 rocks and regoliths) are abundant, glasses with exotic compositions (i.e., transported from other areas of the Moon) account for up to ?30% of the population. A higher proportion of compositionally exotic, angular glass fragments exists when compared to compositionally exotic glass spherules. Ratios of non‐volatile lithophile elements (i.e., Al, Ti, Mg) have been used to constrain the original source materials of the impact glasses. This approach is immune to the effects of open‐system losses of volatile elements (e.g., Si, Na, K). Four impact glasses from one compositionally exotic group (low‐Mg high‐K Fra Mauro; lmHKFM) were selected for ⁴⁰Ar/³⁹ Ar dating. The individual fragments of lmHKFM glass all yielded ages of ?3750 ± 50 Ma for the time of the impact event. Based on the petrography of these individual glasses, we conclude that the likely age of the impact event that formed these 4 glasses, as well as the possible time of their ballistic arrival at the Apollo 16 site from a large and distant cratering event (perhaps in the Procellarum KREEP terrain) (Zeigler et al. 2004), is 3730 ± 40 Ma, close to the accepted age for Imbrium.     

High crustal diversity preserved in the lunar meteorite Mount DeWitt 12007 (Victoria Land,Antarctica)

The meteorite Mount DeWitt (DEW) 12007 is a polymict regolith breccia mainly consisting of glassy impact‐melt breccia particles, gabbroic clasts, feldspathic clasts, impact and volcanic glass beads, basaltic clasts, and mingled breccia clasts embedded in a matrix dominated by fine‐grained crystals; vesicular glassy veins and rare agglutinates are also present. Main minerals are plagioclase (typically An_>85) and clinopyroxene (pigeonites and augites, sometimes interspersed). The presence of tranquillityite, coupled with the petrophysical data, the O‐isotope data (Δ¹⁷O = ?0.075), and the FeO_tot/MnO ratios in olivine (91), pyroxene (65), and bulk rock (77) indicate a lunar origin for DEW 12007. Impactites consist of Al‐rich impact‐melt splashes and plagioclase‐rich meta‐melt clasts. The volcanic products belong to the very low titanium (VLT) or low titanium (LT) suites; an unusual subophitic fragment could be cryptomare‐related. Gabbroic clasts could represent part of a shallow intrusion within a volcanic complex with prevailing VLT affinity. DEW 12007 has a mingled bulk composition with relatively high incompatible element abundances and shows a high crustal diversity comprising clasts from the Moon's major terranes and rare lithologies. First‐order petrographic and chemical features suggest that DEW 12007 could be launch‐paired with other meteorites including Y 793274/981031, QUE 94281, EET 87521/96008, and NWA 4884.     

On the petrology and structure of a gravitionally differentiated moon of fission origin

In a previous paper, it was shown that the basic properties and the developmental history of a gravitationally differentiated Moon of fission origin match those known for the Moon. In the first part of this report, the models of a differentiated Moon are critically reviewed based on second order considerations of some of the chemical systems used to develope the earlier models and based on new lunar data. As a result, slightly updated models are developed and the results indicate that a Moon of fission origin has a feldspar rich crust (≈70% Or_0.8Ab_5.3An_93.9 with ≈30% pyroxene and olivine) reaching an average depth of ≈65 km. A KREEP rich layer is located at the interface of the crust and the upper mantle. The upper mantle consists of peridotite (≈80% Wo₁₀En₇₀Fs₂₀ and ≈20% Fo_75–80 with ≈3% Al₂O₃ and ≈ 2% TiO₂) and reaches a depth of 300–400 km. Below 300–400 km lies a dunite (≈Fo₉₅) lower mantle. A simple model for the distribution of K, U and Th (and by inference, KREEP) in the differentiated Moon model is developed using a distribution coefficient of 0.1 for the three elements. This coefficient is derived from published data on the distribution of U in Apollo 11 basalts. The simple model successfully accounts for the observed K, U and Th contents of the various mare basalts and upland rocks and yields a heat flow of 21 erg cm^?2s^?1 for the Moon. A model for the fine structure of the peridotite upper mantle of the model Moon is developed based on the TiO₂ and trace element variations observed in the various mare basalts. It is proposed that the upper mantle is rhythmically banded on the scale of 10's of km and that this banding leads to local variations of a factor of ±3 in the K, U and Th content, _-10 ⁺⁵ in the TiO₂ content and _-∞ ⁺² in the olivine content of the peridotite. It is also proposed that this banding leads to large scale horizontal inhomogenuities in the composition of the upper mantle. It is also shown that the formation of the primitive suite of upland rocks is easily explained by the cumulation of plagioclase, which carried varying amounts of pyroxene, olivine and melt with it, during the peritectic crystallization of the last 20% of the differentiating Moon. It is found that the 100 Mg/(Mg+Fe) ratios of the mafics and the An contents of the plagioclases of the rocks are controlled by several factors, the most important of which is the ratio of melt to crystals which together formed the various upland rocks. The inverse relationship between the An contents and the Mg contents of the upland rocks is a direct consequence of the differentiation sequence proposed. The results and models presented in this paper further support the hypothesis that the Moon formed as a result of fission from the proto-Earth.     

Magma source transition of lunar mare volcanism at 2.3 Ga

Mare basalts provide insights into the composition and thermal history of the lunar mantle. The ages of mare basalts suggest a first peak of magma activity at 3.2–3.8 Ga and a second peak at ~2 Ga. In this study, we reassess the correlation between the titanium contents and the eruption ages of mare basalt units using the compositional and chronological data updated by SELENE (Kaguya). Using morphological and geological criteria, we calculated the titanium content of 261 mare units across a representative area of each mare unit. In the Procellarum KREEP Terrane, where the latest eruptions are located, an increase in the mean titanium content is observed during the Eratosthenian period, as reported by previous studies. We found that the increase in the mean titanium content occurred within a relatively short period near approximately 2.3 Ga, suggesting that the magma source of the mare basalts changed at this particular age. Moreover, the high‐titanium basaltic eruptions are correlated with a second peak in volcanic activity near ~2 Ga. The high‐titanium basaltic eruptions occurring during the last volcanic activity period can be explained by the three possible scenarios (1) the ilmenite‐bearing cumulate rich layer in the core‐mantle boundary formed after the mantle overturn, (2) the basaltic material layers beneath the lunar crust formed through upwelling magmas, and (3) ilmenite‐bearing cumulate blocks remained in the upper mantle after the mantle overturn.     

Integration and Comparison of Clementine and Lunar Prospector Data: Global Scale Multielement Analysis1 (Fe,Ti, and Th) of the Lunar Surface

In this paper, we present (1) a statistical analysis, based on a systematic clustering method, of a dataset integrating the global abundance maps of the three elements iron, titanium, and thorium derived from Clementine and Lunar Prospector and (2) a comparison of iron abundances between Clementine and Lunar Prospector. Homogeneous geologic units are compositionally characterized and spatially defined in relation to the major rock types sampled on the Moon. With the lowest abundances of Fe, Ti, and Th found on the Moon, the lunar highland terrains are quite homogeneous with two major large feldspathic units, one being slightly more mafic than the other. Two distinct regions with unique compositions are unambiguously identified: the Procellarum KREEP Terrane (PKT) and the South Pole–Aitken (SPA). The PKT, which includes all the units with Th abundances higher than 3.5 ppm (KREEP-rich materials), is delimited by an almost continuous ringlike unit. In particular, it includes the western nearside maria, except for Mare Humorum. With concentrations in Fe, Ti, and Th enhanced relative to the surrounding highlands, the South Pole–Aitken basin floor represents a large mafic anomaly on the far side, suggesting wide deposits of lower crust and possible mantle materials. However, due to indirect residual latitude effects in the CSR (Clementine spectral reflectance) measurements, iron abundances might have been overestimated in SPA, thus implying that crustal materials, rather than mantle materials, might represent the dominant contributor to the mafic component exposed on the basin floor.     

An analysis of Apollo lunar soil samples 12070,889, 12030,187, and 12070,891: Basaltic diversity at the Apollo 12 landing site and implications for classification of small‐sized lunar samples

Lunar mare basalts provide insights into the compositional diversity of the Moon's interior. Basalt fragments from the lunar regolith can potentially sample lava flows from regions of the Moon not previously visited, thus, increasing our understanding of lunar geological evolution. As part of a study of basaltic diversity at the Apollo 12 landing site, detailed petrological and geochemical data are provided here for 13 basaltic chips. In addition to bulk chemistry, we have analyzed the major, minor, and trace element chemistry of mineral phases which highlight differences between basalt groups. Where samples contain olivine, the equilibrium parent melt magnesium number (Mg#; atomic Mg/[Mg + Fe]) can be calculated to estimate parent melt composition. Ilmenite and plagioclase chemistry can also determine differences between basalt groups. We conclude that samples of approximately 1–2 mm in size can be categorized provided that appropriate mineral phases (olivine, plagioclase, and ilmenite) are present. Where samples are fine‐grained (grain size <0.3 mm), a “paired samples t‐test” can provide a statistical comparison between a particular sample and known lunar basalts. Of the fragments analyzed here, three are found to belong to each of the previously identified olivine and ilmenite basalt suites, four to the pigeonite basalt suite, one is an olivine cumulate, and two could not be categorized because of their coarse grain sizes and lack of appropriate mineral phases. Our approach introduces methods that can be used to investigate small sample sizes (i.e., fines) from future sample return missions to investigate lava flow diversity and petrological significance.     

Northwest Africa 482: A crystalline impact‐melt breccia from the lunar highlands

Abstract— Northwest Africa 482 (NWA 482) is a crystalline impact‐melt breccia from the Moon with highlands affinities. The recrystallized matrix and the clast population are both highly anorthositic. Clasts are all related to the ferroan anorthosite suite, and include isolated plagioclase crystals and lithic anorthosites, troctolites, and spinel troctolites. Potassium‐, rare‐earth‐element‐, and phosphorus‐bearing (KREEP) and mare lithologies are both absent, constraining the source area of this meteorite to a highland terrain with little to no KREEP component, most likely on the far side of the Moon. Glass is present in shock veins cutting through the sample and in several large melt pockets, indicating a second impact event. There are two separate events recorded in the ⁴⁰Ar‐³⁹Ar system: one at ～3750 Ma, which completely reset the K‐Ar system, and one at ?2400 Ma, which caused only partial degassing. These events could represent, respectively, crystallization of the impact‐melt breccia and later formation of the glass, or the formation of the glass and a later thermal event. The terrestrial age of the meteorite is 8.6 ± 1.3 ka. This age corresponds well with the modest amount of weathering in the rock, in the form of secondary phyllosilicates and carbonates. Based on terrestrial age and location, lithology, and chemistry, NWA 482 is unique among known lunar meteorites.     

Interpretation of lunar heat flow data

Lunar heat flow observations at the Apollo 15 and 17 sites can be interpreted to imply bulk U concentrations for the Moon of 5 to 8 times those of normal chondrites and 2 to 4 times terrestrial values inferred from the Earth's heat flow and the assumption of thermal steady state between surface heat flow and heat production. A simple model of nearsurface structure that takes into account the large difference in (highly insulating) regolith thickness between mare and highland provinces is considered. This model predicts atypically high local values of heat flow near the margins of mare regions - possibly a factor of 10 or so higher than the global average. A test of the proposed model using multifrequency microwave techniques appears possible wherein heat flow traverse measurements are made across mare-highland contacts. The theoretical considerations discussed here urge caution in attributing global significance to point heat-flow measurements on the Moon.