The complex impact structure Serra da Cangalha,Tocantins State,Brazil

Abstract– Serra da Cangalha is a complex impact structure with a crater diameter of 13,700 m and a central uplift diameter of 5800 m. New findings of shatter cones, planar fractures, feather features, and possible planar deformation features are presented. Several ring‐like features that are visible on remote sensing imagery are caused by selective erosion of tilted strata. The target at Serra da Cangalha is composed of Devonian to Permian sedimentary rocks, mainly sandstones that are interlayered with siltstone and claystones. NNE–SSW and WNW–ESE‐striking joint sets were present prior to the impact and also overprinted the structure after its formation. As preferred zones of weakness, these joint sets partly controlled the shape of the outer perimeter of the structure and, in particular, affected the deformation within the central uplift. Joints in radial orientation to the impact center did not undergo a change in orientation during tilting of strata when the central uplift was formed. These planes were used as major displacement zones. The asymmetry of the central uplift, with preferred overturning of strata in the northern to western sector, may suggest a moderately oblique impact from a southerly direction. Buckle folding of tilted strata, as well as strata overturning, indicates that the central uplift became gravitationally unstable at the end of crater formation.     

Shock‐metamorphic microfeatures in chert from the Jebel Waqf as Suwwan impact structure,Jordan

Abstract– The petrographic investigation of a shocked, chalcedony‐, quartzine‐, and quartz‐bearing allochthonous chert nodule (probably Upper Cretaceous) recovered from surficial wadi gravels in the inner parts of the central uplift of the approximately 6 km in diameter Jebel Waqf as Suwwan impact structure, Jordan, reveals new potential shock indicators in microfibrous–spherulitic silica, in addition to well‐established shock‐metamorphic effects in coarser crystalline quartz. The microcrystalline chert groundmass exhibits a macroscopic dendritic and suborthogonal fracture pattern commonly associated with thin “recrystallization bands” that intersect the pre‐existing diagenetic chert fabric. Fibrous aggregates of quartzine spherulites in chalcedony‐quartzine‐quartz veinlets locally have a shattered appearance and show conspicuous “curved fractures” perpendicular to the quartzine fiber direction (and parallel to [0001]) that commonly trend subparallel to planar fractures (PFs) in neighboring shocked quartz. Quartz exhibits PFs, feather features (FFs), and mainly single sets of planar deformation features (PDFs) parallel to the basal plane (0001) (Brazil twins) and, rarely, additional PDFs parallel to {101¯3}. Shock petrography indicates shock pressures of ≥10 GPa and high shock‐induced differential stresses that affected the chert nodule. The internal crosscutting relationships of primary diagenetic and impact‐related deformational features together with shockpressure estimates suggest that the curved fractures across quartzine spherulites might represent specific (low‐ to medium‐pressure) shock‐metamorphic features, possibly in structural analogy to basal plane PFs in quartz. The dendritic–suborthogonal fractures in the microcrystalline chert groundmass and recrystallization bands are likely related to impact‐induced shear deformation and recrystallization, respectively, and cannot be considered as definite shock indicators.     

Ramgarh,Rajasthan, India: A 10 km diameter complex impact structure

The Ramgarh structure is a morphological landmark in southeastern Rajasthan, India. Its 200 m high and 3.5–4 km wide annular collar has provoked many hypotheses regarding its origin, including impact. Here, we document planar deformation features, planar fractures, and feather features in quartz grains of the central part of the Ramgarh structure, which confirm its impact origin. The annular collar does not mark the crater rim but represents the outer part of a central uplift of an approximately 10 km diameter complex impact structure. The apparent crater rim is exposed as a low‐angle normal fault and can be traced as lineaments in remote sensing imagery. The central uplift shows a stratigraphic uplift of ~1000 m and is rectangular in shape. It is dissected by numerous faults that are co‐genetic with the formation of the central uplift. The central uplift has a bilateral symmetry along an SW‐NE axis, where a large strike‐slip fault documents a strong horizontal shear component. This direction corresponds to the assumed impact trajectory from the SW toward the NE. The uprange sector is characterized by concentric reverse faults, whereas radial faults dominate downrange. Sandstones of the central uplift are infiltrated by Fe‐oxides and suggest an impact‐induced hydrothermal mineralization overprint. The impact may have occurred into a shallow water environment as indicated by soft‐sediment deformation features, observed near the apparent crater rim, and the deposition of a diamictite layer above them. Gastropods embedded in the diamictite have Middle Jurassic age and may indicate the time of the impact.     

The Bow City structure,southern Alberta,Canada: The deep roots of a complex impact structure?

Geological and geophysical evidence is presented for a newly discovered, probable remnant complex impact structure. The structure, located near Bow City, southern Alberta, has no obvious morphological expression at surface. The geometry of the structure in the shallow subsurface, mapped using downhole geophysical well logs, is a semicircular structural depression approximately 8 km in diameter with a semicircular uplifted central region. Detailed subsurface mapping revealed evidence of localized duplication of stratigraphic section in the central uplift area and omission of strata within the surrounding annular region. Field mapping of outcrop confirmed an inlier of older rocks present within the center of the structure. Evidence of deformation along the eastern margin of the central uplift includes thrust faulting, folding, and steeply dipping bedding. Normal faults were mapped along the northern margin of the annular region. Isopach maps reveal that structural thickening and thinning were accommodated primarily within the Belly River Group. Evidence from legacy 2‐D seismic data is consistent with the subsurface mapping and reveals additional insight into the geometry of the structure, including a series of listric normal faults in the annular region and complex faulting within the central uplift. The absence of any ejecta blanket, breccia, suevite, or melt sheet (based on available data) is consistent with the Bow City structure being the remnant of a deeply eroded, complex impact structure. Accordingly, the Bow City structure may provide rare access and insight into zones of deformation remaining beneath an excavated transient crater in stratified siliciclastic target rocks.     

Structural evolution of the 40 km wide Araguainha impact structure,central Brazil

Abstract— The 40 km wide Araguainha structure in central Brazil is a shallowly eroded impact crater that presents unique insights into the final stages of complex crater formation. The dominant structural features preserved at Araguainha relate directly to the centripetal movement of the target rocks during the collapse of the transient cavity. Slumping of the transient cavity walls resulted in inward‐verging inclined folds and a km‐scale anticline in the outer ring of the structure. The folding stage was followed by radial and concentric faulting, with downward displacement of kilometer‐scale blocks around the crater rim. The central uplift records evidence for km‐scale upward movement of crystalline basement rocks from the transient cavity floor, and lateral moment of sedimentary target rocks detached from the cavity walls. Much of the structural grain in the central uplift relates to structural stacking of km‐scale thrust sheets of sedimentary strata onto the core of crystalline basement rocks. Outward‐plunging radial folds indicate tangential oblate shortening of the strata during the imbrication of the thrust sheets. Each individual sheet records an early stage of folding and thickening due to non‐coaxial strains, shortly before sheet imbrication. We attribute this folding and thickening phase to the kilometer‐scale inward movement of the target strata from the transient cavity walls to the central uplift. The outer parts of the central uplift record additional outward movement of the target rocks, possibly related to the collapse of the central uplift. An inner ring structure at 10–12 km from the crater center marks the extent of the deformation related to the outward movement of the target rocks.     

A shallow seismic refraction study of the Versailles cryptoexplosion structure,central Kentucky

Abstract— The Versailles cryptoexplosion structure, located in central Kentucky, contains a partially brecciated central uplift and a boundary marked by arcuate faulting. Seismic refraction data were used to divide the structure into distinct units on the basis of velocity. A zone of brecciated material shows a decrease in velocity compared with surrounding rocks. Locally thickened strata are present on the flanks of the central uplift. An increase of the bedrock velocity in the area surrounding the structure suggests localized dolomization of fractured bedrock, and a plug of fractured strata near the base of the brecciation appears to be uplifted. Based on the geometry of deformation seen in known impact structures, and the integration of this study with previous geological and geophysical work in the area, it is suggested that our results support the interpretation of the Versailles structure as an eroded astrobleme (Black, 1964b; Seeger, 1972).     

The Vakkejokk Breccia: An Early Cambrian proximal impact ejecta layer in the North‐Swedish Caledonides

The ≤27 m thick Vakkejokk Breccia is intercalated in autochthon Lower Cambrian along the Caledonian front north of Lake Torneträsk, Lapland, Sweden. The spectacular breccia is here interpreted as a proximal ejecta layer associated with an impact crater, probably ~2–3 km in size, located below Caledonian overthrusts immediately north of the main breccia section. The impact would have taken place in a shallow‐marine environment ~520 Ma ago. The breccia comprises i) a strongly disturbed lower polymict subunit with occasional, in themselves brecciated, crystalline mega‐clasts locally exceeding 50 m surrounded by contorted sediments; ii) a middle, commonly normally graded, crystalline‐rich, polymict subunit, in turn locally overlain by iii) a thin fine‐grained quartz sandstone, <30 cm thick. The upper sandstone is sporadically either overlain, or replaced, by a conglomerate. In progressively more distal parts of the ejecta layer, the lower subunit is better described as only slightly disturbed strata. The lower subunit is suggested to have formed by ejecta bombardment of the strata surrounding the impact crater, even causing some net outwards mobilization of the sediments. The middle subunit and the uppermost quartz sandstone are considered resurge deposits. The top conglomerate may be caused by subsequent wave reworking and slumping of material from the elevated rim. Quartz grains showing planar deformation features are present in the graded polymict subunit and the upper sandstone, that is, the inferred resurge deposits.     

Shock fabrics in fine‐grained micrometeorites

The orientations of dehydration cracks and fracture networks in fine‐grained, unmelted micrometeorites were analyzed using rose diagrams and entropy calculations. As cracks exploit pre‐existing anisotropies, analysis of their orientation provides a mechanism with which to study the subtle petrofabrics preserved within fine‐grained and amorphous materials. Both uniaxial and biaxial fabrics are discovered, often with a relatively wide spread in orientations (40°–60°). Brittle deformation cataclasis and rotated olivine grains are reported from a single micrometeorite. This paper provides the first evidence for impact‐induced shock deformation in fine‐grained micrometeorites. The presence of pervasive, low‐grade shock features in CM chondrites and CM‐like dust, anomalously low‐density measurements for C‐type asteroids, and impact experiments which suggest CM chondrites are highly prone to disruption all imply that CM parent bodies are unlikely to have remained intact and instead exist as a collection of loosely aggregated rubble‐pile asteroids, composed of primitive shocked clasts.     

Tectonics of complex crater formation as revealed by the Haughton impact structure,Devon Island,Canadian High Arctic

Abstract— The results of a systematic field mapping campaign at the Haughton impact structure have revealed new information about the tectonic evolution of mid‐size complex impact structures. These studies reveal that several structures are generated during the initial compressive outward‐directed growth of the transient cavity during the excavation stage of crater formation: (1) sub‐vertical radial faults and fractures; (2) sub‐horizontal bedding parallel detachment faults; and (3) minor concentric faults and fractures. Uplift of the transient cavity floor toward the end of the excavation stage produces a central uplift. Compressional inward‐directed deformation results in the duplication of strata along thrust faults and folds. It is notable that Haughton lacks a central topographic peak or peak ring. The gravitational collapse of transient cavity walls involves the complex interaction of a series of interconnected radial and concentric faults. While the outermost concentric faults dip in toward the crater center, the majority of the innermost faults at Haughton dip away from the center. Complex interactions between an outward‐directed collapsing central uplift and inward collapsing crater walls during the final stages of crater modification resulted in a structural ring of uplifted, intensely faulted (sub‐) vertical and/or overturned strata at a radial distance from the crater center of ?5.0–6.5 km. Converging flow during the collapse of transient cavity walls was accommodated by the formation of several structures: (1) sub‐vertical radial faults and folds; (2) positive flower structures and chaotically brecciated ridges; (3) rollover anticlines in the hanging‐walls of major listric faults; and (4) antithetic faults and crestal collapse grabens. Oblique strike‐slip (i.e., centripetal) movement along concentric faults also accommodated strain during the final stages of readjustment during the crater modification stage. It is clear that deformation during collapse of the transient cavity walls at Haughton was brittle and localized along discrete fault planes separating kilometer‐size blocks.     

Geology and impact features of Vargeão Dome,southern Brazil

Abstract– Vargeão Dome (southern Brazil) is a circular feature formed in lava flows of the Lower Cretaceous Serra Geral Formation and in sandstones of the Paraná Basin. Even though its impact origin was already proposed in the 1980s, little information about its geological and impact features is available in the literature. The structure has a rim‐rim diameter of approximately 12 km and comprises several ring‐like concentric features with multiple concentric lineaments. The presence of a central uplift is suggested by the occurrence of deformed sandstone strata of the Botucatu and Pirambóia formations. We present the morphological/structural characteristics of Vargeão Dome, characterize the different rock types that occur in its interior, mainly brecciated volcanic rocks (BVR) of the Serra Geral Formation, and discuss the deformation and shock features in the volcanic rocks and in sandstones. These features comprise shatter cones in sandstone and basalt, as well as planar microstructures in quartz. A geochemical comparison of the target rock equivalents from outside the structure with the shocked rocks from its interior shows that both the BVRs and the brecciated sandstone have a composition largely similar to that of the corresponding unshocked lithologies. No traces of meteoritic material have been found so far. The results confirm the impact origin of Vargeão Dome, making it one of the largest among the rare impact craters in basaltic targets known on Earth.     

Shocked quartz grains in the early Cambrian Vakkejokk Breccia,Sweden—Evidence of a marine impact

Here we present a study of the abundance and orientation of planar deformation features (PDFs) in the Vakkejokk Breccia, a proposed lower Cambrian impact ejecta layer in the North‐Swedish Caledonides. The presence of PDFs is widely accepted as evidence for shock metamorphism associated with cosmic impact events and their presence confirms that the Vakkejokk Breccia is indeed the result of an impact. The breccia has previously been divided into four lithological subunits (from bottom to top), viz. lower polymict breccia (LPB), graded polymict breccia (GPB), top sandstone (TS), and top conglomerate (TC). Here we show that the LPB contains no shock metamorphic features, indicating that the material derives from just outside of the crater and represents low‐shock semi‐autochthonous bombarded strata. In the overlying, more fine‐grained GPB and TS, quartz grains with PDFs are relatively abundant (2–5% of the grain population), and with higher shock levels in the upper parts, suggesting that they have formed by reworking of more distal ejecta by resurge of water toward the crater in a marine setting. The absence of shocked quartz grains in the TC indicates that this unit represents later slumps associated with weathering and erosion of the protruding crater rim. Sparse shocked quartz grains (<0.2%) were also found in sandstone beds occurring at the same stratigraphic level as the Vakkejokk Breccia 15–20 km from the inferred crater site. It is currently unresolved whether the sandstone at these distal sites is related to the impact or just contains rare reworked quartz grains with PDFs.     

The Haughton Impact Structure: Summary and Synthesis of the Results of the HISS Project*

Abstract— Surface and subsurface structural studies undertaken under the Haughton impact structure study (HISS) project indicate that the 23 Ma-old Haughton impact structure, (Devon Island, Canadian Arctic) consists of a central basin of uplifted strata, an inner zone of uplifted megablocks at 3.5–5.5 km radius, a complex, faulted annulus of megablocks at 5.5–7.0 km radius and an outer zone of downfaulted blocks. No evidence of a previously suggested structural multi-ring form was found. The geophysical studies suggest an original diameter of 24 km, slightly larger than previous estimates and the seismic data indicate considerably more faulting in the western portion than has been mapped from surface exposures. Detailed studies of the allochthonous breccia deposits found no major radial variations in lithology and shock levels. The only anomaly is the concentration of highly shocked, cobble-sized clasts in the central area coincident with the maximum gravity and magnetic anomalies. It is suggested that this local component is related to the highly shocked rocks of the central uplift and may have been shed from the uplift during late stage adjustments. There is no visible central topographic peak of uplifted bedrock at Haughton but studies of the post-impact Haughton Formation suggest that the center of the structure subsided 300–350 m soon after formation. Breccia studies also indicate the occurrence of shock-melted sediments, including shales, but no evidence of shock melted carbonates, the most common target lithology. This may be ascribed to the ease with which carbonates are volatilized by relatively moderate shock levels. The large amount of volatiles released on impact helped disperse the highly shocked products leading to the formation of a relatively cool clastic and polymict breccia deposit in the interior, as opposed to a coherent melt sheet. In this regard, the breccia deposit is somewhat analogous to the suevite deposits within the Ries crater. Sedimentological studies indicate that the Cretaceous-age Eureka Sound Formation was present at the time of impact and that the Haughton area has undergone as much as 200 m of erosion since the time of impact.     

Geology and impact features of Riachão structure,northern Brazil

Riachão, located at S7°42′/W46°38′ in Maranhão State, northeastern Brazil, is a complex impact structure of about 4.1 km diameter, formed in Pennsylvanian to Permian sedimentary rocks of the Parnaíba Basin sequence. Although its impact origin was already proposed in the 1970s, information on its geology and shock features is still scarce in the literature. We present here the main geomorphological and geological characteristics of the Riachão impact structure obtained by integrated geophysical and remote sensing analysis, as well as geological field work and petrographic analysis. The identified lithostratigraphic units consist of different levels of the Pedra de Fogo Formation and, possibly, the Piauí Formation. Our petrographic analysis confirms the presence of shock‐diagnostic planar microdeformation structures in quartz grains of sandstone from the central uplift as evidence for an impact origin of the Riachão structure. The absence of crater‐filling impact breccias and melt rocks, shatter cones, as well as the restricted occurrence of microscopic shock effects, suggests that intense and relatively deep erosion has occurred since crater formation.     

The Corossol structure: A possible impact crater on the seafloor of the northwestern Gulf of St. Lawrence,Eastern Canada

We report on a 4.1 (±0.2) km diameter and 185 m deep circular submarine structure exposed on the seabed in >40 m water depths in the northwestern Gulf of St. Lawrence (Eastern Canada) from the analysis of high‐resolution multibeam bathymetric and seismic data. The presence of a circular form characterized by a central uplift and concentric rings resembles the morphology and geometry of complex meteorite impact structures. Also, other origins, such as kimberlites, intrusions, karsts, or diapirs, can be eliminated on geological criteria. A single 4 cm long breccia fragment recovered from the central uplift has numerous glassy droplets of fluorapatite composition, assumed to be impact melts, and a single quartz grain with planar intersection features thought to be shock‐induced planar deformation features (PDFs). The absolute age of this possible impact structure is unknown, but its geological setting indicates that it was formed long after the Mid‐Ordovician and before regional pre‐Quaternary sea‐level lowstands. Present results outline the need for further examination to confirm an impact origin and to precisely date the formation of the structure.     

Radial transpression ridges: A new structural feature of complex impact craters

Abstract— The gravity‐driven collapse of complex impact craters induces the mass transfer of large rock volumes. In distal parts of a crater, inward movements dominate; whereas in the centre of an impact structure, outward movements occur if the central uplift collapses. The particle trajectory field is centro‐symmetric, which signifies that the conditions for plane‐strain deformation are not fullfilled. Converging particle trajectories can be compensated either by a bulk thickening of inward sliding masses (folding, repetition of rock units along thrust faults, plastic flow) or by the formation of localised radial transpression ridges (RTR) at the edges of individual landslides. In these transpression ridges, material is uplifted to accommodate the converging mass flow. Different modes of uplift are possible including radial folding, lateral overthrusting, and the formation of positive flower structures. A simple geometric model is used to estimate the amount of transpression thickening and bulk thickening of inward sliding masses on the base of volumetric considerations. The existence of RTRs is confirmed by structural investigations at the Siljan impact structure, Sweden, as well as at other complex impact craters on Earth.     

Impact tectonics in the core of the Vredefort dome,South Africa: Implications for central uplift formation in very large impact structures

Abstract— The 80 km wide Vredefort dome presents a unique opportunity to investigate the deep levels of the central uplift of a very large impact structure. Exposure of progressively older strata in the collar of the dome and of progressively higher‐grade metamorphic rocks toward its center is consistent with differential uplift; however, the deepest levels exposed correspond to pre‐impact midcrust, rather than lower crust, as has been suggested previously. Pre‐impact Archean gneissic fabrics in the core of the dome are differentially rotated, with the angle of rotation increasing sharply at a distance of ?16–19 km from the center. The present asymmetric dips of the collar strata, with layering dipping outward at moderate angles in the southeastern sector but being overturned and dipping inward in the northwestern sector, and the eccentric distribution of the pre‐impact metamorphic isograds around the core of the dome can be reconciled with symmetric rotation of an initially obliquely NW‐dipping target sequence during central uplift formation. The rocks in the core of the dome lack distinctive megablocks or large‐slip‐magnitude faults such as have been described in other central uplifts. We suggest that the large‐scale coherent response of these rocks to the central uplift formation could have been accommodated by small‐scale shear and/or rotation along pervasive pseudotachylitic breccia vein‐fractures.     

The first description and confirmation of the Vista Alegre impact structure in the Paraná flood basalts of southern Brazil

Abstract– The Vista Alegre structure, centered at 25°57′S and 52°41′W, has been recently proposed as a meteorite impact structure. The 9.5 km‐diameter structure is located in the Paraná state of southern Brazil, within the Paraná Basin, which contains one of the largest and most extensive flood basalt provinces on Earth. The Paraná flood basalts belong to the Serra Geral Formation and are temporally related to the opening of the South Atlantic Ocean, having been dated at about 133–132 Ma. Tholeiitic basalts dominate the western portion of Paraná state, with some minor rhyodacites. Morphologically, Vista Alegre has a prominent circular outline, in the form of an incomplete ring of escarpments, and an inner depression. The presence of a central uplift is not obvious, but it is inferred by the occurrence of deformed sandstone blocks near the center of the structure. These sandstones are possibly related to the Triassic Pirambóia Formation and/or to the Cretaceous Botucatu Formation. These units are normally at stratigraphic depths of about 700–800 m below the present surface in this portion of the Paraná Basin. The structure appears to be in an advanced erosion stage and its interior is occupied by a soil cover several meters thick, extensively used for agriculture. As a result there are limited outcrops in the interior of the structure, all of polymict breccias, some of them melt‐bearing. We report the extensive occurrence of shatter cones, in the form of fine‐grained rock clasts within the polymict breccias. The shatter cone‐bearing breccias occur at different locations within the structure, separated by several kilometers. The nested shatter cones range in size from about 0.5 to 20 cm for individual cones, and up to half a meter for complete assemblages. The shatter cones formed in fine‐grained Parana flood basalt and might be the first examples of shatter cones in such a rock type. In addition, planar deformation features (PDFs) were found in quartz grains within sedimentary rock clasts of the polymict breccia. These findings confirm the impact origin of the Vista Alegre structure.     

Cloud Creek structure,central Wyoming,USA: Impact origin confirmed

Abstract— The circular Cloud Creek structure in central Wyoming, USA is buried beneath ?1200 m of Mesozoic sedimentary rocks and has a current diameter of ?7 km. The morphology/morphometry of the structure, as defined by borehole, seismic, and gravity data, is similar to that of other buried terrestrial complex impact structures in sedimentary target rocks, e.g., Red Wing Creek in North Dakota, USA. The structure has a fault‐bordered central peak with minimum diameter of ?1.4 km, composed predominantly of Paleozoic carbonates thickened by thrust faulting and brecciation, and is elevated some 520 m above equivalent strata beyond the outer rim of the structure. There is a ?1.6 km wide annular trough sloping away from the central peak (maximum structural relief, 300 m) and terminated by a detached, fault‐bounded, rim anticline. The youngest rocks within the structure are Late Triassic (Norian?) clastics and these are overlain unconformably by post‐impact Middle Jurassic (Bathonian?) sandstones and shales. Thus, the formation of the Cloud Creek structure is dated chronostratigraphicly as ?190 ± 20 Ma. Reported here for the first time are measurements of planar deformation features (PDFs) in shocked quartz grains in thin sections made from drill cuttings recovered in a borehole drilled at the southern perimeter of the central peak. Other, less definitive microstructures consistent with impact occur in samples collected from boreholes drilled into the central peak and rim anticline. The shock‐metamorphic evidence confirms an impact origin for the Cloud Creek structure.     

The structural inventory of a small complex impact crater: Jebel Waqf as Suwwan,Jordan

The investigation of terrestrial impact structures is crucial to gain an in‐depth understanding of impact cratering processes in the solar system. Here, we use the impact structure Jebel Waqf as Suwwan, Jordan, as a representative for crater formation into a layered sedimentary target with contrasting rheology. The complex crater is moderately eroded (300–420 m) with an apparent diameter of 6.1 km and an original rim fault diameter of 7 km. Based on extensive field work, IKONOS imagery, and geophysical surveying we present a novel geological map of the entire crater structure that provides the basis for structural analysis. Parametric scaling indicates that the structural uplift (250–350 m) and the depth of the ring syncline (<200 m) are anomalously low. The very shallow relief of the crater along with a NE vergence of the asymmetric central uplift and the enhanced deformations in the up‐range and down‐range sectors of the annular moat and crater rim suggest that the impact was most likely a very oblique one (~20°). One of the major consequences of the presence of the rheologically anisotropic target was that extensive strata buckling occurred during impact cratering both on the decameter as well as on the hundred‐meter scale. The crater rim is defined by a circumferential normal fault dipping mostly toward the crater. Footwall strata beneath the rim fault are bent‐up in the down‐range sector but appear unaffected in the up‐range sector. The hanging wall displays various synthetic and antithetic rotations in the down‐range sector but always shows antithetic block rotation in the up‐range sector. At greater depth reverse faulting or folding is indicated at the rim indicating that the rim fault was already formed during the excavation stage.     

Ash Shutbah: A possible impact structure in Saudi Arabia

We have investigated the Ash Shutbah circular structure in central Saudi Arabia (21°37′N 45°39′E) using satellite imagery, field mapping, thin‐section petrography, and X‐ray diffraction of collected samples. The approximately 2.1 km sized structure located in flat‐lying Jurassic Tuwaiq Mountain Limestone has been nearly peneplained by erosional processes. Satellite and structural data show a central area consisting of Dhruma Formation sandstones with steep bedding and tight folds plunging radially outward. Open folding occurs in displaced, younger Tuwaiq Mountain Limestone Formation blocks surrounding the central area, but is absent outside the circular structure. An approximately 60 cm thick, unique folded and disrupted orthoquartzitic sandstone marker bed occurring in the central area of the structure is found 140 m deeper in undisturbed escarpment outcrops located a few hundred meters west of the structure. With exception of a possible concave shatter cone found in the orthoquartzite of the central area, other diagnostic shock features are lacking. Some quartz‐rich sandstones from the central area show pervasive fracturing of quartz grains with common concussion fractures. This deformation was followed by an event of quartz dissolution and calcite precipitation consistent with local sea‐ or groundwater heating. The combination of central stratigraphic uplift of 140 m, concussion features in discolored sandstone, outward‐dipping concentric folds in the central area, deformation restricted to the rocks of the ring structure, a complex circular structure of 2.1 km diameter that appears broadly consistent with what one would expect from an impact structure in sedimentary targets, and a possible shatter cone all point to an impact origin of the Ash Shutbah structure. In fact, the Ash Shutbah structure appears to be a textbook example of an eroded, complex impact crater located in flat‐lying sedimentary rocks, where the undisturbed stratigraphic section can be studied in escarpment outcrops in the vicinity of the structure.