Structural investigations of the two polymorphs of synthetic Fe-cordierite and Raman spectroscopy of hexagonal Fe-cordierite

The crystal structures of synthetic hexagonal and orthorhombic Fe-cordierite polymorphs with the space groups P6/mcc and Cccm were refined from single-crystal X-ray diffraction data to R _{1, hex}?=?3.14 % and R _{1, ortho}?=?4.48 %. The substitution of the larger Fe²⁺ for Mg leads to multiple structural changes and an increase of the unit cell volumes, with a, c (hex)?=?9.8801(16) Å, 9.2852(5) Å and a, b, c (ortho)?=?17.2306(2) Å, 9.8239(1) Å, 9.2892(1) Å in the end-members. Furthermore Fe incorporation results in an increase of the volumes of the octahedra, although the diameters of the octahedra in direction of the c-axis decrease in both polymorphs. X-ray powder diffraction analysis indicates a high degree of Al/Si ordering in the orthorhombic polymorph, the Miyashiro distortion index is ~0.24. Estimations of site occupancies based on the determined tetrahedral volumes result in the following values for hexagonal Fe-cordierite: ~73 % Al for T₁ and ~28 % Al for T₂. For the first time Raman spectroscopy was performed on the hexagonal Fe-cordierite polymorph. In the hexagonal Fe-cordierite polymorph most Raman peaks are shifted towards lower wavenumbers when compared with the Mg-end-member.     

Hydrogen bond effects on compressional behavior of isotypic minerals: high-pressure polymorphism of cristobalite-like Be(OH)<Subscript>2</Subscript>

Three isotypic crystals, SiO₂ (α-cristobalite), ε-Zn(OH)₂ (wülfingite), and Be(OH)₂ (β-behoite), with topologically identical frameworks of corner-connected tetrahedra, undergo displacive compression-driven phase transitions at similar pressures (1.5–2.0 GPa), but each transition is characterized by a different mechanism resulting in different structural modifications. In this study, we report the crystal structure of the high-pressure γ-phase of beryllium hydroxide and compare it with the high-pressure structures of the other two minerals. In Be(OH)₂, the transition from the ambient β-behoite phase with the orthorhombic space group P2₁2₁2₁ and ambient unit cell parameters a = 4.5403(4) Å, b = 4.6253(5) Å, c = 7.0599(7) Å, to the high-pressure orthorhombic γ-polymorph with space group Fdd2 and unit cell parameters (at 5.3(1) GPa) a = 5.738(2) Å, b = 6.260(3) Å, c = 7.200(4) Å takes place between 1.7 and 3.6 GPa. This transition is essentially second order, is accompanied by a negligible volume discontinuity, and exhibits both displacive and reversible character. The mechanism of the phase transition results in a change to the hydrogen bond connectivities and rotation of the BeO₄ tetrahedra.     

Equations of state of magnesium silicates anhydrous B and superhydrous B

High-pressure single crystal X-ray diffraction experiments of phase anhydrous B and superhydrous B have been carried out to 7.3 and 7.7?GPa, respectively, at room temperature. Fitting a third-order Birch-Murnaghan equation of state to the P-V data yields values of V ₀?=?838.86?±?0.04?ų, K_T,0?=?151.5?±?0.9?GPa and K′?=?5.5?±?0.3 for Anhy-B and V ₀?=?624.71?± 0.03?ų, K_T,0?=?142.6?±?0.8?GPa and K′?=?5.8?±?0.2 for Shy-B. A similar analysis of the axial compressibilities in Anhy-B reveals that the c-axis is most compressible (K_c?=?137?±?3?GPa), the b-axis is least compressible (K_b?=?175?±?4?GPa), and the a-axis is intermediate (K_a?=?148?±?1?GPa). In Shy-B, the a-axis is most compressible (K_a?=?135?±?1?GPa), followed by the b- and c-axes which have similar compressibilities (K_b?=?146?±?3?GPa; K_c?=?148?±?3?GPa). The fact that the b-axis of Shy-B is approximately 16% more compressible than Anhy-B is primarily due to differences in the O-T layer in which the H atoms are located and the linkages with the adjacent O layers. The rigid edge-sharing chains of MgO₆ and SiO₆ octahedra in the O layer control compressibility along the a- and c-axes in both structures. The net result is a reduction in the overall anisotropic compression from ～22% in Anhy-B to ～9% in Shy-B.     

Clinopyroxene-perovskite phase transition of FeGeO3 under high pressure and room temperature

In order to confirm the possible existence of FeGeO₃ perovskite, we have performed in situ X-ray diffraction measurements of FeGeO₃ clinopyroxene at pressures up to 40 GPa at room temperature. The transition of FeGeO₃ clinopyroxene into orthorhombic perovskite is observed at about 33GPa. The cell parameters of FeGeO₃ perovskite are a=4.93(2) Å, b=5.06(6) Å, c=6.66(3) Å and V=166(3) ų at 40 GPa. On release of pressure, the perovskite phase transformed into lithium niobate structure. The previously reported decomposition process of clino-pyroxene into Fe₂GeO₄ (spinel)+GeO₂ (rutile) or FeO (wüstite) +GeO₂ (rutile) was not observed. This shows that the transition of pyroxene to perovskite is kinetically accessible compared to the decomposition processes under low-temperature pressurization.     

High-pressure crystal chemistry of chromous orthosilicate, Cr2SiO4. A single-crystal X-ray diffraction and electronic absorption spectroscopy study

The high-pressure behaviour of chromous orthosilicate, Cr₂SiO₄, has been studied by means of single-crystal X-ray diffraction and electronic absorption spectroscopy. X-ray diffraction data show that the structure remains orthorhombic to the highest pressure reached of 9.22?GPa. The compressibility of the unit-cell is strongly anisotropic with the c axis approximately six times more compressible than the a and b axes. A third-order Birch-Murnaghan equation of state fitted to the volume-pressure data yields V ₀?=?610.10(3)?ų, K = 94.7(4)?GPa, K′?=?8.32(14). Cr₂SiO₄ is therefore more compressible than the isostructural Cd analogue, even though its molar volume is smaller. This unusual behaviour can be attributed to the fact that the Cr atom is too small for the six-coordinated site that it occupies, and the site is therefore strongly distorted. Structure refinements indicate that under high pressures the Cr atom remains strongly displaced from the central position of the octahedron. Polarized and unpolarized electronic absorption spectra include a strong absorption band occuring at 18.300 cm^?1 for E//c (which is parallel to the shortest Cr-Cr vector in the structure) which has an unusually large half width (5000?cm^?1), indicative of electronic interaction between metal centres. Deconvolution of unpolarized high-pressure spectra show that the relative integrated intensity of this component increases linearly from 40% at 1?bar to 60% at 11.2?GPa. Both the structural changes and the absorption spectra at high pressures suggest that pairs of adjacent Cr atoms in chromous orthosilicate form chromium dimers with a weak metal-metal bond, which is consistent with the diamagnetic response found at ambient pressure.     

New type of possible high-pressure polymorphism in NiAs minerals in planetary cores

The nickel arsenide (B8₁) and related crystal structures are among the most important crystallographic arrangements assumed by Fe and Ni compounds with light elements such as Si, O, S, and P, expected to be present in planetary cores. Despite the simple structure, some of these materials like troilite (FeS) exhibit complex phase diagrams and rich polymorphism, involving significant changes in interatomic bonding and physical properties. NiP (oP16) represents one of the two principal structure distortions found in the nickel arsenide family and is characterized by P–P bonding interactions that lead to the formation of P₂ dimers. In the current study, the single-crystal synchrotron X-ray diffraction technique, aided by first principles density functional theory (DFT) calculations, has been applied to examine the compression behavior of NiP up to 30 GPa. Two new reversible displacive phase transitions leading to orthorhombic high-pressure phases with Pearson symbols oP40 and oC24 were found to occur at approximately 8.5 and 25.0 GPa, respectively. The oP40 phase has the primitive Pnma space group with unit cell a = 4.7729(5) Å, b = 16.6619(12) Å, and c = 5.8071(8) Å at 16.3(1) GPa and is a superstructure of the ambient oP16 phase with multiplicity of 2.5. The oC24 phase has the acentric Cmc2₁ space group with unit cell a = 9.695(6) Å, b = 5.7101(9) Å, and c = 4.7438(6) Å at 28.5(1) GPa and is a superstructure of the oP16 phase with multiplicity of 1.5. DFT calculations fully support the observed sequence of phase transitions. The two new phases constitute logical next stages of P sublattice polymerization, in which the dilution of the P₃ units, introduced in the first high-pressure phase, decreases, leading to compositions of Ni₂₀(P₃)₄(P₂)₄ and Ni₁₂(P₃)₄, and provide important clues to understanding of phase relations and transformation pathways in the NiAs family.     

A new high-pressure and high-temperature polymorph of FeS

A new polymorph of FeS has been observed at pressures above 30 GPa at 1,300 K by in situ synchrotron X-ray diffraction measurements in a laser-heated diamond anvil cell. It is stable up to, at least, 170 GPa at 1,300 K. The new phase (here called FeS VI) has an orthorhombic unit cell with lattice parameters a = 4.8322 (17) Å, b = 3.0321 (6) Å, and c = 5.0209 (8) Å at 85 GPa and 300 K. Its topological framework is based on the NiAs-type structure as is the case for the other reported polymorphs (FeS I-V). The unit cell of FeS VI is, however, more distorted (contracted) along the [010] direction of the original NiAs-type cell. For example, the c/b axial ratio is ～1.66 at 85 GPa and 300 K, which is considerably smaller than that of orthorhombic FeS II (～1.72) and NiAs-type hexagonal FeS V (=√3 ≈ 1.73). The phase boundary between FeS IV and VI is expected to be located around 30 GPa at 1,300 K. The phase transition is accompanied by gradual and continuous changes in volume and axial ratios and may be second order. At room temperature, FeS VI becomes stable over FeS III at pressures above 36 GPa. It is, therefore, suggested that the phase boundary of FeS III–VI and/or FeS IV–VI has negative pressure dependence.     

Static compression of α-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>: linear incompressibility of lattice parameters and high-pressure transformations

The high-pressure behavior of -Fe₂O₃ has been studied under static compression up to 60 GPa, using a laser-heated diamond anvil cell. Synchrotron-based angular-dispersive X-ray diffraction shows that the sample remains in the corundum structure up to 50 GPa, but with the appearance of coexisting diffraction lines from a high-pressure phase at pressures above 45 GPa. A least-squares fit of low-pressure phase data to an Eulerian finite-strain equation of state yields linear incompressibilities of K _{a 0}=749.5 (± 18.4) GPa and K _{c 0}= 455.7 (± 21.4) GPa, differing by a factor of 1.6 along the two directions. The enhanced compressibility of the c axis may lead to breaking of vertex- or edge-sharing bonds between octahedra, inducing the high-pressure phase transformation at 50 GPa. Analysis of linear compressibilities suggests that the high-pressure phase above 50 GPa is of the Rh₂O₃ (II) structure. Continuous laser heating reveals a new structural phase transformation of -Fe₂O₃ at 22 GPa, to an orthorhombic structure with a=7.305(3) Å, b=7.850(3) Å, and c=12.877(14) Å, different from the Rh₂O₃ (II) structure.     

Stability at high-pressure,elastic behaviour and pressure-induced structural evolution of CsAlSi<Subscript>5</Subscript>O<Subscript>12</Subscript>, a potential host for nuclear waste

The elastic and structural behaviour of the synthetic zeolite CsAlSi₅O₁₂ (a = 16.753(4), b = 13.797(3) and c = 5.0235(17) Å, space group Ama2, Z = 2) were investigated up to 8.5 GPa by in situ single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions. No phase-transition occurs within the P-range investigated. Fitting the volume data with a third-order Birch–Murnaghan equation-of-state gives: V ₀ = 1,155(4) ų, K _T0 = 20(1) GPa and K′ = 6.5(7). The “axial moduli” were calculated with a third-order “linearized” BM-EoS, substituting the cube of the individual lattice parameter (a ³, b ³, c ³) for the volume. The refined axial-EoS parameters are: a ₀ = 16.701(44) Å, K _T0a = 14(2) GPa (β_a = 0.024(3) GPa^?1), K′ _a = 6.2(8) for the a-axis; b ₀ = 13.778(20) Å, K _T0b = 21(3) GPa (β_b = 0.016(2) GPa^?1), K′ _b = 10(2) for the b-axis; c ₀ = 5.018(7) Å, K _T0c = 33(3) GPa (β_c = 0.010(1) GPa^?1), K′ _c = 3.2(8) for the c-axis (K _T0a:K _T0b:K _T0c = 1:1.50:2.36). The HP-crystal structure evolution was studied on the basis of several structural refinements at different pressures: 0.0001 GPa (with crystal in DAC without any pressure medium), 1.58(3), 1.75(4), 1.94(6), 3.25(4), 4.69(5), 7.36(6), 8.45(5) and 0.0001 GPa (after decompression). The main deformation mechanisms at high-pressure are basically driven by tetrahedral tilting, the tetrahedra behaving as rigid-units. A change in the compressional mechanisms was observed at P ≤ 2 GPa. The P-induced structural rearrangement up to 8.5 GPa is completely reversible. The high thermo-elastic stability of CsAlSi₅O_12, the immobility of Cs at HT/HP-conditions, the preservation of crystallinity at least up to 8.5 GPa and 1,000°C in elastic regime and the extremely low leaching rate of Cs from CsAlSi₅O₁₂ allow to consider this open-framework silicate as functional material potentially usable for fixation and deposition of Cs radioisotopes.     

New high-pressure phases in BaCO<Subscript>3</Subscript>

Barium carbonate (BaCO₃) was examined in a diamond anvil cell up to a pressure of 73 GPa using an in situ angle-dispersive X-ray diffraction technique. Three new phases of BaCO₃ were observed at pressures >10 GPa. From 10 to 24 GPa, BaCO₃-IV had a post-aragonite structure with space group Pmmn. There are two molecules in a single unit cell (Z = 2) of the orthorhombic phase, which is same as the high-pressure phases of CaCO₃ and SrCO₃. The isothermal bulk modulus of BaCO₃-IV is K ₀ = 84(4) GPa, with V ₀ = 129.0(7) Å³ when K ₀′ = 4. The c axis of the unit cell parameter is less compressible than the a and b axes. The relative change in volume that accompanies the transformation between BaCO₃-III and BaCO₃-IV is ～6%. BaCO₃-V, which has an orthorhombic symmetry, was synthesized at 50 GPa. As the pressure increases, BaCO₃-V is transformed into tetragonal BaCO₃-VI. This transformation is likely to be second order, because the diffraction pattern of BaCO₃-V is similar to that of BaCO₃-VI, and some single peaks in BaCO₃-VI become doublets in BaCO₃-V. After decompression, the new high-pressure phases transform into BaCO₃-II. Our findings resolve a dispute regarding the stable high-pressure phases of BaCO₃.     

Structural control of polyhedral compression in synthetic braunite, Mn2+Mn3+ 6O8SiO4

The compression of synthetic braunite, Mn²⁺Mn³⁺ ₆O₈SiO₄, was studied by high-pressure single-crystal X-ray diffraction carried out in a diamond-anvil cell. The equation of state at room temperature (third-order Birch-Murnaghan equation of state: V ₀=1661.15(8) ų, K _0,298=180.7±0.9 GPa, K′=6.5±0.3) was determined from unit-cell volume data to 9.18 GPa. Crystal structures were determined at 6 different pressures to 7.69 GPa. Compression of the structure (space group I4₁/acd) was found to be slightly anisotropic (a ₀=9.4262(4) Å, K _a =499±4 GPa, K _a ′=19.7±0.9; c ₀=18.6964(6) Å, K _c =657±6 GPa, K _c ′=15.7±1.4) which can be attributed to the fact that the Mn³⁺-O bonds, which are the most compressible bonds, are aligned closer to the (001) plane than to the c axis. The large bulk modulus is the result of the structural topology in which 2/3 and 1/2 of the edges of the Mn²⁺O₈ and Mn³⁺O₆ polyhedra share edges with other polyhedra. The Mn²⁺O₈ polyhedra were found to compress isotropically, whereas anisotropic compressional behaviour was observed for all three Mn³⁺O₆ octahedra. Although the polyhedral geometry of all three crystallographically independent Mn³⁺ sites shows the same type of uniaxially elongated distortion, the compression of the individual octahedral configurations was found to be strongly dependent upon both the geometry of the polyhedron itself and the types of, and the connectivity to, the neighbouring polyhedra. The differences in the configuration of the different oxygen atoms, and therefore the structural topology, is one of the major factors determining the type and degree of the pressure-induced distortion, while the Jahn-Teller effect plays a subordinate role.     

Structural investigations,high temperature behavior and phase transition of Na6Ca4(SO4)6F2

Polycrystalline material of a sulfate apatite with chemical composition Na₆Ca₄(SO₄)₆F₂ or (Na₂Ca₄)Na₄(SO₄)₆F₂ has been synthesized by solid state reactions. Basic crystallographic data are as follows: hexagonal symmetry, a?=?9.3976(1) Å, c?=?6.8956(1) Å, V?=?527.39(1) ų, Z?=?1, space group P6₃/m. For structural investigations the Rietveld method was employed. Thermal expansion has been studied between 25 and 600 °C. High temperature (HT) powder diffraction data as well as thermal analysis indicate that the apatite-type compound undergoes a reconstructive phase transition in the range between 610 and 630 °C. Single-crystals of the HT-polymorph were directly grown from the melt. Structural investigations based on single-crystal diffraction data of the quenched crystals performed at ?100 °C showed orthorhombic symmetry (space group Pna2₁) with a?=?12.7560(8) Å, b?=?8.6930(4) Å, c?=?9.8980(5) Å, V?=?1097.57(10) ų and Z?=?2. Unit cell parameters for a quenched polycrystalline sample of the HT-form obtained at ambient conditions from a LeBail-fit are as follows: a?=?12.7875(1) Å, b?=?8.7255(1) Å, c?=?9.9261(1) Å, V?=?1107.53(2) ų. The lattice parameters of both modifications are related by the following approximate relationships: a _HT?≈?2c _RT, b _HT?≈?-(½a _RT?+?b _RT), c _HT?≈?a _RT. The HT-modification is isotypic with the corresponding potassium compound K₆Ca₄(SO₄)₆F₂. The pronounced disorder of the sulphate group even at low temperatures has been studied by maximum entropy calculations. Despite the first-order character of the transformation clusters of sulfate groups surrounding the fluorine anions can be identified in both polymorphs. Each of the three next neighbor SO₄-tetrahedra within a cluster is in turn surrounded by 8–9 M-cations (M: Na,Ca) defining cage-like units. However, in the apatite structure the corresponding three tricapped trigonal prisms are symmetry equivalent. Furthermore, the central fluorine atom of each cluster is coordinated by three next M-neighbors (FM₃-triangles), whereas in the HT-polymorph a four-fold coordination is observed (FM₄-tetrahedra).     

Phase F,a new hydrous magnesium silicate synthesized at 1000 °C and 17 GPa: Crystal structure and estimated bulk modulus

The structure of phase F, a non-stoichiometric hydrous silicate synthesized in a uniaxial, split-sphere, multi-anvil apparatus at conditions of 17 GPa and 1000° C, has been solved and refined in space group P6₃cm, using synchrotron X-ray data for a single crystal of a size 18 × 24 × 30 μm. The composition and unit cell for phase F are Mg_3.35Si_5.51H_7.26O₁₈, a=5.073(3) Å, c=14.013(9) Å, 7= 312.3(5) ų. The structure contains layers with many similarities to superhydrous phase B. The layers of oxygen atoms are stacked in the ABCBAC-type double cubic closest packing arrangement. The bulk modulus of phase F was estimated from the structural and compositional relationship to superhydrous phase B and periclase.     

High-pressure behaviour and equation of state of calcite, CaCO3

The high-pressure response of the cell parameters of calcite, CaCO₃, has been investigated by single crystal X-ray diffraction. The unit cell parameters have been refined from 0 to 1.435?GPa, and the linear and volume compressibilities have been measured as β _a =2.62(2)?×?10^?3?GPa^?1,β _c =7.94(7)?×?10^?3?GPa^?1, β _v =13.12?×?10^?3?GPa^?1. The bulk modulus has been obtained from a fit to the Birch-Murnaghan equation of state, giving K ₀=73.46?±?0.27?GPa and V ₀=367.789 ±?0.004?ų with K′=4. Combined with earlier data for magnesite, ankerite and dolomite, these data suggest that K ₀ V ₀ is a constant for the Ca-Mg rhombohedral carbonates.     

Elastic behavior of vanadinite,Pb<Subscript>10</Subscript>(VO<Subscript>4</Subscript>)<Subscript>6</Subscript>Cl<Subscript>2</Subscript>, a microporous non-zeolitic mineral

The high-pressure behavior of a vanadinite (Pb₁₀(VO₄)₆Cl₂, a = b = 10.3254(5), c = 7.3450(4) Å, space group P6₃/m), a natural microporous mineral, has been investigated using in-situ HP-synchrotron X-ray powder diffraction up to 7.67 GPa with a diamond anvil cell under hydrostatic conditions. No phase transition has been observed within the pressure range investigated. Axial and volume isothermal Equations of State (EoS) of vanadinite were determined. Fitting the P–V data with a third-order Birch-Murnaghan (BM) EoS, using the data weighted by the uncertainties in P and V, we obtained: V ₀ = 681(1) Å³, K ₀ = 41(5) GPa, and K′ = 12.5(2.5). The evolution of the lattice constants with P shows a strong anisotropic compression pattern. The axial bulk moduli were calculated with a third-order “linearized” BM-EoS. The EoS parameters are: a ₀ = 10.3302(2) Å, K ₀(a) = 35(2) GPa and K′(a) = 10(1) for the a-axis; c ₀ = 7.3520(3) Å, K ₀(c) = 98(4) GPa, and K′(c) = 9(2) for the c-axis (K ₀(a):K ₀(c) = 1:2.80). Axial and volume Eulerian-finite strain (fe) at different normalized stress (Fe) were calculated. The weighted linear regression through the data points yields the following intercept values: Fe _a (0) = 35(2) GPa for the a-axis, Fe _c (0) = 98(4) GPa for the c-axis and Fe _V (0) = 45(2) GPa for the unit-cell volume. The slope of the regression lines gives rise to K′ values of 10(1) for the a-axis, 9(2) for the c-axis and 11(1) for the unit cell-volume. A comparison between the HP-elastic response of vanadinite and the iso-structural apatite is carried out. The possible reasons of the elastic anisotropy are discussed.     

High-pressure elastic behavior of Ca4La6(SiO4)6(OH)2 a synthetic rare-earth silicate apatite: a powder X-ray diffraction study up to 9.33 GPa

The compression behavior of a synthetic Ca₄La₆(SiO₄)₆(OH)₂ has been investigated to about 9.33 GPa at 300 K using in situ angle-dispersive X-ray diffraction and a diamond anvil cell. No phase transition has been observed within the pressure range investigated. The values of zero-pressure volume V ₀, K ₀, and $K_{0}^{'}$ refined with a third-order Birch–Murnaghan equation of state are V ₀ = 579.2 ± 0.1 Å³, K ₀ = 89 ± 2 GPa, and $K_{0}^{'} = 10.9 \pm 0.8$ . If $K_{0}^{'}$ is fixed at 4, K ₀ is obtained as 110 ± 2 GPa. Analysis of axial compressible modulus shows that the a-axis (K _a0 = 79 ± 2 GPa) is more compressible than the c-axis (K _c0 = 121 ± 7 GPa). A comparison between the high-pressure elastic response of Ca₄La₆(SiO₄)₆(OH)₂ and the iso-structural calcium apatites is made. The possible reasons of the different elastic behavior between Ca₄La₆(SiO₄)₆(OH)₂ and calcium apatites are discussed.     

Equation of state of Fe3+-bearing phase-X

We investigated the high-pressure behaviour of Fe³⁺-bearing hydrous phase-X, (K_1.307Na_0.015)(Mg_1.504Fe _0.373 ³⁺ Al_0.053Ti _0.004 ⁴⁺ )Si₂O₇H_0.36, up to 34?GPa at room temperature by synchrotron X-ray powder diffraction. The lattice parameters behave anisotropically, with the [001] direction stiffer than [100]. In the 10^?4 to 22?GPa pressure range, the axial bulk moduli are K _0a ?=?112(3) GPa and K′?=?4, and K _0c ?=?158(2) GPa and K′?=?4, and the anisotropy of the lattice parameters is β_0c :β_0a ?=?0.71:1. The cell volumes are fitted by a second-order Birch–Murnaghan equation of state giving a bulk modulus of K ₀?=?127(1) GPa and K′?=?4 in the same pressure range. After 22?GPa, a discontinuity in volume and lattice parameters can be recognized. Sample did not become amorphous up to 34?GPa. The coupled substitution K?+?Mg?=?[]?+?Fe³⁺ has only a limited influence on the bulk modulus and structural stability of phase-X.     

Pressure induced phase transition in Pb<Subscript>6</Subscript>Bi<Subscript>2</Subscript>S<Subscript>9</Subscript>

The crystal structure of Pb₆Bi₂S₉ is investigated at pressures between 0 and 5.6 GPa with X-ray diffraction on single-crystals. The pressure is applied using diamond anvil cells. Heyrovskyite (Bbmm, a = 13.719(4) Å, b = 31.393(9) Å, c = 4.1319(10) Å, Z = 4) is the stable phase of Pb₆Bi₂S₉ at ambient conditions and is built from distorted moduli of PbS-archetype structure with a low stereochemical activity of the Pb²⁺ and Bi³⁺ lone electron pairs. Heyrovskyite is stable until at least 3.9 GPa and a first-order phase transition occurs between 3.9 and 4.8 GPa. A single-crystal is retained after the reversible phase transition despite an anisotropic contraction of the unit cell and a volume decrease of 4.2%. The crystal structure of the high pressure phase, β-Pb₆Bi₂S₉, is solved in Pna2 ₁ (a = 25.302(7) Å, b = 30.819(9) Å, c = 4.0640(13) Å, Z = 8) from synchrotron data at 5.06 GPa. This structure consists of two types of moduli with SnS/TlI-archetype structure in which the Pb and Bi lone pairs are strongly expressed. The mechanism of the phase transition is described in detail and the results are compared to the closely related phase transition in Pb₃Bi₂S₆ (lillianite).     

Structural evolution of hemimorphite at high pressure up to 4.2 GPa

The high-pressure structural evolution of hemimorphite, Zn₄Si₂O₇(OH)₂·H₂O, a = 8.3881(13), b = 10.7179(11), c = 5.1311(9) Å, V = 461.30(12) Å³, space group Imm2, Z = 2, was studied by single-crystal X-ray diffraction with a diamond anvil cell under hydrostatic conditions up to 4.2 GPa. In the pressure range of 0.0001–2.44 GPa, the unit-cell parameters change almost linearly. The phase transition (probably of the second order) with symmetry reduction from Imm2 (hemimorphite-I) to Pnn2 (hemimorphite-II) was found near 2.5 GPa. The structure compressibility increases somewhat above the phase transition. Namely, the initial unit-cell volume decreases by 3.6% at 2.44 GPa and by 7.2% at 4.20 GPa. The hemimorphite framework can be described as built up of secondary building units (SBU) Zn₄Si₂O₇(OH)₂. These blocks are combined to form the rods arranged along the c-axis; these rods are multiplied by basic and I-translations of orthorhombic unit cell. The symmetry reduction is caused by the rotation of the rods along their axis. In hemimorphite-I, the compression affects mainly the SBU dimensions, whereas a rectangular section of the channels having mm2 symmetry remains practically unchanged. An appreciable decrease in this section in hemimorphite-II is determined by its oblique distortion with the loss of m planes. It results from opposite rotation of adjacent SBU, which also leads into the loss of I-translation. In hemimorphite-I, the coordination of H₂O molecules is fourfold planar; the hydrogen-bonded hydroxyls and H₂O molecules form infinite ribbons along the c-axis. In hemimorphite-II, an additional short H₂O–O contact appears as a result of asymmetric deformation of the channels. The appearance of this new contact provides the possibility for re-orientation of hydrogen bonds. The planar coordination of H₂O molecules changes to tetrahedral and the ribbons are transformed to islands (OH)₂–H₂O.     

Antigorite equation of state and anomalous softening at 6 GPa: an in situ single-crystal X-ray diffraction study

The compressibility of antigorite has been determined up to 8.826(8) GPa, for the first time by single crystal X-ray diffraction in a diamond anvil cell, on a specimen from Cerro del Almirez. Fifteen pressure–volume data, up to 5.910(6) GPa, have been fit by a third-order Birch–Murnaghan equation of state, yielding V ₀ = 2,914.07(23) Å³, K _T0 = 62.9(4) GPa, with K′ = 6.1(2). The compression of antigorite is very anisotropic with axial compressibilities in the ratio 1.11:1.00:3.22 along a, b and c, respectively. The new equation of state leads to an estimation of the upper stability limit of antigorite that is intermediate with respect to existing values, and in better agreement with experiments. At pressures in excess of 6 GPa antigorite displays a significant volume softening that may be relevant for very cold subducting slabs.