Robotic photosieving from low‐cost multirotor sUAS: a proof‐of‐concept

Measurement of riverbed material grain sizes is now a routine part of fieldwork in fluvial geomorphology and lotic ecology. In the last decade, several authors have proposed remote sensing approaches of grain size measurements based on terrestrial and aerial imagery. Given the current rise of small unmanned aerial system (sUAS) applications in geomorphology, there is now increasing interest in the application of these remotely sensed grain size mapping methods to sUAS imagery. However, success in this area has been limited owing to two fundamental problems: lack of constraint of image scale for sUAS imagery and blurring effects in sUAS images and resulting orthomosaics. In this work, we solve the former by showing that SfM‐photogrammetry can be used in a direct georeferencing (DG) workflow (i.e. with no ground validation) in order to predict image scale within margins of 3%. We then propose a novel approach of robotic photosieving of dry exposed riverbed grains that relies on near‐ground images acquired from a low‐cost sUAS and which does not require the presence of ground control points or visible scale objects. We demonstrate that this absence of scale objects does not affect photosieving outputs thus resulting in a low‐cost and efficient sampling method for surficial grains. Copyright © 2017 John Wiley & Sons, Ltd.     

Use of terrestrial photosieving and airborne topographic LiDAR to assess bed grain size in large rivers: a study on the Rhine River

Most grain size monitoring is still being conducted by manual sampling in the field, which is time consuming and has low spatial representation. Due to new remote sensing methods, some limitations have been partly overcome, but methodological progress is still needed for large rivers as well as in underwater conditions. In this article, we tested the reliability of two methods along the Old Rhine River (France/Germany) to estimate the grain size distribution (GSD) in above-water conditions: (i) a low-cost terrestrial photosieving method based on an automatic procedure using Digital Grain Size (DGS) software and (ii) an airborne LiDAR topo-bathymetric survey. We also tested the ability of terrestrial photosieving to estimate the GSD in underwater conditions. Field pebble counts were performed to compare and calibrate both methods. The results showed that the automatic procedure of terrestrial photosieving is a reliable method to estimate the GSD of sediment patches in both above-water and underwater conditions with clean substrates. Sensitivity analyses showed that environmental conditions, including solar lighting conditions and petrographic variability, significantly influence the GSD from the automatic procedure in above-water conditions. The presence of biofilm in underwater conditions significantly altered the GSD estimation using the automatic procedure, but the proposed manual procedure overcame this problem. The airborne LiDAR topographic survey is an accurate method to estimate the GSD of above-water bedforms and is able to generate grain size maps. The combination of terrestrial photosieving and airborne topographic LiDAR methods is adapted to assess the GSD over several kilometers long reaches of large rivers. © 2020 John Wiley & Sons, Ltd.     

Field application of close‐range digital photogrammetry (CRDP) for grain‐scale fluvial morphology studies

In situ measurement of grain‐scale fluvial morphology is important for studies on grain roughness, sediment transport and the interactions between animals and the geomorphology, topics relevant to many river practitioners. Close‐range digital photogrammetry (CRDP) and terrestrial laser scanning (TLS) are the two most common techniques to obtain high‐resolution digital elevation models (DEMs) from fluvial surfaces. However, field application of topography remote sensing at the grain scale is presently hindered mainly by the tedious workflow challenges that one needs to overcome to obtain high‐accuracy elevation data. A recommended approach for CRDP to collect high‐resolution and high‐accuracy DEMs has been developed for gravel‐bed flume studies. The present paper investigates the deployment of the laboratory technique on three exposed gravel bars in a natural river environment. In contrast to other approaches, having the calibration carried out in the laboratory removes the need for independently surveyed ground‐control targets, and makes for an efficient and effective data collection in the field. Optimization of the gravel‐bed imagery helps DEM collection, without being impacted by variable lighting conditions. The benefit of a light‐weight three‐dimensional printed gravel‐bed model for DEM quality assessment is shown, and confirms the reliability of grain roughness data measured with CRDP. Imagery and DEM analysis evidences sedimentological contrasts between gravel bars within the reach. The analysis of the surface elevations shows the effect variable grain‐size and sediment sorting have on the surface roughness. By plotting the two‐dimensional structure functions and surface slopes and aspects we identify different grain arrangements and surface structures. The calculation of the inclination index allows determining the surface‐forming flow direction(s). We show that progress in topography remote sensing is important to extend our knowledge on fluvial morphology processes at the grain scale, and how a technique customized for use by fluvial geomorphologists in the field benefits this progress. Copyright © 2016 John Wiley & Sons, Ltd.     

Feature based image processing methods applied to bathymetric measurements from airborne remote sensing in fluvial environments

Bathymetric maps produced from remotely sensed imagery are increasingly common. However, when this method is applied to fluvial environments, changing scenes and illumination variations severely hinder the application of well established empirical calibration methods used to obtain predictive depth–colour relationships. In this paper, illumination variations are corrected with feature based image processing, which is used to identify areas in an image with a near‐zero water depth. This information can then be included in the depth–colour calibration process, which results in an improved prediction quality. The end product is an automated bathymetric mapping method capable of a 4 m² spatial resolution with a precision of ±15 cm, which allows for a more widespread application of bathymetric mapping. Copyright © 2006 John Wiley & Sons, Ltd.     

Subaerial gravel size measurement using topographic data derived from a UAV‐SfM approach

Accurate and reliable methods for quantifying grain size are important for river science, management and in various other sedimentological settings. Remote sensing offers methods of quantifying grain size, typically providing; (a) coarse outputs (c. 1 m) at the catchment scale where individual grains are at subpixel level, or; (b) fine resolution outputs (c. 1 mm) at the patch scale. Recently, approaches using unmanned aerial vehicles (UAVs) have started to fill the gap between these scales, providing hyperspatial resolution data (< 10 cm) over reaches a few hundred metres in length, where individual grains are at suprapixel level. This ‘mesoscale’ is critical to habitat assessments. Most existing UAV‐based approaches use two‐dimensional (2D) textural variables to predict grain size. Validation of results is largely absent however, despite significant differences in platform stability and image quality obtained by manned aircraft versus UAVs. Here, we provide the first quantitative assessment of the accuracy and precision of grain size estimates produced from a 2D image texture approach. Furthermore, we present a new method which predicts subaerial gravel size using three‐dimensional (3D) topographic data derived from UAV imagery. Data is collected from a small gravel‐bed river in Cumbria, UK. Results indicate that our new topographic method gives more accurate measures of grain size (mean residual error ‐0.0001 m). Better results for the image texture method may be precluded by our choice of texture measure, the scale of analysis or the effects of image blur resulting from an inadequate camera gimbal. We suggest that at our scale of assessment, grain size is more strongly related to 3D variation in elevation than to the 2D textural patterns expressed within the imagery. With on‐going improvements, our novel method has potential as the first grain size quantification approach where a trade‐off between coverage and resolution is not necessary or inherent. Copyright © 2017 John Wiley & Sons, Ltd.     

Optical remote mapping of rivers at sub‐meter resolutions and watershed extents

At watershed extents, our understanding of river form, process and function is largely based on locally intensive mapping of river reaches, or on spatially extensive but low density data scattered throughout a watershed (e.g. cross sections). The net effect has been to characterize streams as discontinuous systems. Recent advances in optical remote sensing of rivers indicate that it should now be possible to generate accurate and continuous maps of in‐stream habitats, depths, algae, wood, stream power and other features at sub‐meter resolutions across entire watersheds so long as the water is clear and the aerial view is unobstructed. Such maps would transform river science and management by providing improved data, better models and explanation, and enhanced applications. Obstacles to achieving this vision include variations in optics associated with shadows, water clarity, variable substrates and target–sun angle geometry. Logistical obstacles are primarily due to the reliance of existing ground validation procedures on time‐of‐flight field measurements, which are impossible to accomplish at watershed extents, particularly in large and difficult to access river basins. Philosophical issues must also be addressed that relate to the expectations around accuracy assessment, the need for and utility of physically based models to evaluate remote sensing results and the ethics of revealing information about river resources at fine spatial resolutions. Despite these obstacles and issues, catchment extent remote river mapping is now feasible, as is demonstrated by a proof‐of‐concept example for the Nueces River, Texas, and examples of how different image types (radar, lidar, thermal) could be merged with optical imagery. The greatest obstacle to development and implementation of more remote sensing, catchment scale ‘river observatories’ is the absence of broadly based funding initiatives to support collaborative research by multiple investigators in different river settings. Copyright © 2007 John Wiley & Sons, Ltd.     

Removing sun glint from optical remote sensing images of shallow rivers

Sun glint is the specular reflection of light from the water surface, which often causes unusually bright pixel values that can dominate fluvial remote sensing imagery and obscure the water‐leaving radiance signal of interest for mapping bathymetry, bottom type, or water column optical characteristics. Although sun glint is ubiquitous in fluvial remote sensing imagery, river‐specific methods for removing sun glint are not yet available. We show that existing sun glint‐removal methods developed for multispectral images of marine shallow water environments over‐correct shallow portions of fluvial remote sensing imagery resulting in regions of unreliable data along channel margins. We build on existing marine glint‐removal methods to develop a river‐specific technique that removes sun glint from shallow areas of the channel without over‐correction by accounting for non‐negligible water‐leaving near‐infrared radiance. This new sun glint‐removal method can improve the accuracy of spectrally‐based depth retrieval in cases where sun glint dominates the at‐sensor radiance. For an example image of the gravel‐bed Snake River, Wyoming, USA, observed‐versus‐predicted R² values for depth retrieval improved from 0.66 to 0.76 following sun glint removal. The methodology presented here is straightforward to implement and could be incorporated into image processing workflows for multispectral images that include a near‐infrared band. Copyright © 2016 John Wiley & Sons, Ltd.     

Application of boat‐based laser scanning for river survey

The boat‐based, mobile mapping system (BoMMS) with a laser scanner allows the derivation of detailed riverine topographical data for fluvial applications. Combined with data acquisition from static terrestrial LiDAR (light detection and range) or mobile terrestrial LiDAR on the ground, boat‐based laser scanning enables a totally new field mapping approach for fluvial studies. The BoMMS approach is an extremely rapid methodology for surveying riverine topography, taking only 85 min to survey a reach approximately 6 km in length. The BoMMS approach also allowed an effective survey angle for deep river banks, which is difficult to achieve with aerial or static terrestrial LiDAR. Further, this paper demonstrates the three‐dimensional mapping of a point‐bar and its detailed morphology. Compared with the BoMMS surface, approximately, 80% and 96% of the terrestrial LiDAR points showed a height deviation of less than 2 cm and 5 cm, respectively, with an overall standard deviation of ± 2·7 cm. This level of accuracy and rapidity of data capture enables the mapping of post‐flood deposition directly after a flood event without an extensive time lag. Additionally, the improved object characterisation may allow for better 3D mapping of the point bar and other riverrine features. However, the shadow effect of the BoMMS survey in point bar mapping should be removed by additional LiDAR data to acquire entire riverine topography. The approach demonstrated allowed a large reach to be surveyed compared with static terrestrial LiDAR and increased the spatial limit of survey towards aerial LiDAR, but it maintains the same or even better temporal resolution as static terrestrial LiDAR. Copyright © 2009 John Wiley & Sons, Ltd.     

Evaluation of remote sensing‐based evapotranspiration estimates using a water transfer numerical simulation under different vegetation conditions in an arid area

Daily actual evapotranspiration (AET) and seasonal AET values are of great practical importance in the management of regional water resources and hydrological modelling. Remotely sensed AET models and Landsat satellite images have been used widely in producing AET estimates at the field scale. However, the lack of validation at a high spatial frequency under different soil water conditions and vegetation coverages limits their operational applications. To assess the accuracies of remote sensing‐based AET in an oasis‐desert region, a total of 59 local‐scale daily AET time series, simulated using HYDRUS‐1D calibrated with soil moisture profiles, were used as ground truth values. Of 59 sampling sites, 31 sites were located in the oasis subarea and 28 sites were located in the desert subarea. Additionally, the locally validated mapping evapotranspiration at high resolution with internalized calibration surface energy balance model was employed to estimate instantaneous AET values in the area containing all 59 of the sampling sites using seven Landsat subimages acquired from June 5 to August 24 in 2011. Daily AET was obtained using extrapolation and interpolation methods with the instantaneous AET maps. Compared against HYDRUS‐1D, the remote sensing‐based method produced reasonably similar daily AET values for the oasis sites, while no correlation was observed for daily AET estimated using these two methods for the desert sites. Nevertheless, a reasonable monthly AET could be estimated. The correlation analysis between HYDRUS‐1D‐simulated and remote sensing‐estimated monthly AET values showed relative root‐mean‐square error values of 15.1%, 12.1%, and 12.3% for June, July, and August, respectively. The root mean square error of the summer AET was 10.0%. Overall, remotely sensed models can provide reasonable monthly and seasonal AET estimates based on periodic snapshots from Landsat images in this arid oasis‐desert region.     

Evidence of a changing size–frequency distribution of landslides in the Kyrgyz Tien Shan,Central Asia

There is a strong possibility that environmental change (whether climate or land use) will be manifest as changes in the size–frequency distribution of landslides. Here, evidence is presented for this from western Kyrgyzstan, Central Asia. Remote sensing and spatial analysis have been applied to map mass movements in the central part of the Maily‐Say Valley and to detect recent landslide activations. The evolution of landslide activity over the past 50 years has been analysed on the basis of pre‐existing landslide maps and new analyses of aerial photographs as well as Quickbird images. Five inventories were produced for the years 1962 (based on the existing map of 1962 and aerial photographs of 1962), 1984 (based on the existing map of 1977 and aerial photographs of 1984), 1996 (based on aerial photographs of 1996), 2002 (based on the existing map of 2003 and Quickbird imagery of 2002) and 2007 (based on Quickbird imagery of 2007). The geomorphologic features contained in the catalogues represent the landslide bodies observed from remote imagery of the corresponding year. Mapped landslides are generally considered as the result of a series of slope failure events. Size–frequency analyses applied to the five landslide inventories show that both the number and size of unstable slopes increased from 1962 (162 objects) to 2007 (208 objects) and the power‐law exponent decreased over time. This changing power‐law exponent may indicate that landslide‐related hazards are increasing. This tendency is documented in more detail for two active landslide zones, one in the main valley and one located to the west of it. Landslide detection methods were used to assist the evolution of slope instabilities. Choosing appropriate thresholds, the image subtraction method based on normalized difference vegetation index (NDVI) allowed accurate detection of new sliding activation in these two zones. This confirmed the results of the more extensive survey that there is a systematic shift in power law exponents and size–frequency distributions for Central Asian landslides. Copyright © 2011 John Wiley & Sons, Ltd.     

Land cover mapping using time series HJ-1/CCD data

It is very difficult to have remote sensing data with both high spatial resolution and high temporal frequency; thus, two categories of land-use mapping methodology have been developed separately for coarser resolution and finer resolution data. The first category uses time series of data to retrieve the variation of land surface for classification, which are usually used for coarser resolution data with high temporal frequency. The second category uses fine spatial resolution data to classify different land surface. With the launch of Chinese satellite constellation HJ-1in 2008, four 30 m spatial resolution CCDs with about 360 km coverage for each one onboard two satellites made a revisit period of two days, which brought a new type of data with both high spatial resolution and high temporal frequency. Therefore, by taking the spatiotemporal advantage of HJ-1/CCD data we propose a new method for finer resolution land cover mapping using the time series HJ-1/CCD data, which can greatly improve the land cover mapping accuracy. In our two study areas, the very high resolution remote sensing data within Google Earth are used to validate the land cover mapping results, which shows a very high mapping accuracy of 95.76% and 83.78% and a high Kappa coefficient of 0.9423 and 0.8165 in the Dahuofang area of Liaoning Province and the Heiquan area of Gansu Province respectively.     

Remote sensing application system for water environments developed for Environment Satellite 1

Remote sensing data collected by the Environment Satellite I are characterized by high temporal resolution, high spectral resolution and mid-high spatial resolution. We designed the Remote Sensing Application System for Water Environments (RSASWE) to create an integrated platform for remote sensing data processing, parameter information extraction and thematic mapping using both remote sensing and GIS technologies. This system provides support for regional water environmental monitoring, and prediction and warning of water pollution. Developed to process and apply data collected by Environment Satellite I, this system has automated procedures including clipping, observation geometry computation, radiometric calibration, 6S atmospheric correction and water quality parameter inversion. RSASWE consists of six subsystems: remote sensing image processing, basic parameter inversion, water environment remote sensing thematic outputs, application outputs, automated water environment outputs and a non-point source pollution monitoring subsystem. At present RSASWE plays an important role in operations at the Satellite Environment Center.     

活动断层填图中的航片解译问题

遥感技术和高精度遥感信息的进步,极大地推动了活动构造和地震地质研究的发展,各种遥感技术在最近几年活动断层填图工作中得到了广泛的应用.如何充分利用各种遥感技术,充分挖掘各种遥感信息以提高填图工作的效率和精度,引起了广大相关科技人员的重视.航空照片以其高精度和高直观性在所有遥感信息源中占据着重要的地位.20世纪中晚期,中国...     

Automatic mapping of snow cover depletion curves using optical remote sensing data under conditions of frequent cloud cover and temporary snow

Snow cover depletion curves are required for several water management applications of snow hydrology and are often difficult to obtain automatically using optical remote sensing data owing to both frequent cloud cover and temporary snow cover. This study develops a methodology to produce accurate snow cover depletion curves automatically using high temporal resolution optical remote sensing data (e.g. Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Aqua MODIS or National Oceanic and Atmospheric Administration (NOAA) Advanced Very High Resolution Radiometer (AVHRR)) by snow cover change trajectory analysis. The method consists of four major steps. The first is to reclassify both cloud‐obscured land and snow into more distinct subclasses and to determine their snow cover status (seasonal snow cover or not) based on the snow cover change trajectories over the whole snowmelt season. The second step is to derive rules based on the analysis of snow cover change trajectories. These rules are subsequently used to determine for a given date, the snow cover status of a pixel based on snow cover maps from the beginning of the snowmelt season to that given date. The third step is to apply a decision‐tree‐like processing flow based on these rules to determine the snow cover status of a pixel for a given date and to create daily seasonal snow cover maps. The final step is to produce snow cover depletion curves using these maps. A case study using this method based on Terra MODIS snow cover map products (MOD10A1) was conducted in the lower and middle reaches of the Kaidu River Watershed (19 000 km²) in the Chinese Tien Shan, Xinjiang Uygur Autonomous Region, China. High resolution remote sensing data (charge coupled device (CCD) camera data with 19·5 m resolution of the China and Brazil Environmental and Resources Satellite (CBERS) data (19·5 m resolution), and the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data with 15 m resolution of the Terra) were used to validate the results. The study shows that the seasonal snow cover classification was consistent with that determined using a high spatial resolution dataset, with an accuracy of 87–91%. The snow cover depletion curves clearly reflected the impact of the variation of temperature and the appearance of temporary snow cover on seasonal snow cover. The findings from this case study suggest that the approach is successful in generating accurate snow cover depletion curves automatically under conditions of frequent cloud cover and temporary snow cover using high temporal resolution optical remote sensing data. Copyright © 2007 John Wiley & Sons, Ltd.     

A synergetic use of satellite imagery from SAR and optical sensors to improve coastal flood mapping in the Gulf of Mexico

This work proposes a method for detecting inundation between semi‐diurnal low and high water conditions in the northern Gulf of Mexico using high‐resolution satellite imagery. Radarsat 1, Landsat imagery and aerial photography from the Apalachicola region in Florida were used to demonstrate and validate the algorithm. A change detection approach was implemented through the analysis of red, green and blue (RGB) false colour composites image to emphasise differences in high and low tide inundation patterns. To alleviate the effect of inherent speckle in the SAR images, we also applied ancillary optical data. The flood‐prone area for the site was delineated a priori through the determination of lower and higher water contour lines with Landsat images combined with a high‐resolution digital elevation model. This masking technique improved the performance of the proposed algorithm with respect to detection techniques using the entire Radarsat scene. The resulting inundation maps agreed well with historical aerial photography as the probability of detection reached 83%. The combination of SAR data and optical images, when coupled with a high‐resolution digital elevation model, was shown to be useful for inundation mapping and have a great potential for evaluating wetting/drying algorithms of inland and coastal hydrodynamic models. Copyright © 2011 John Wiley & Sons, Ltd.     

An automated algorithm for river ice monitoring over the Susquehanna River using the MODIS data

Reliable and prompt information on river ice condition and extent is needed to make accurate hydrological forecasts to predict ice jams breakups and issue timely flood warnings. This study presents a technique to detect and monitor river ice using observations from the MODIS instrument onboard the Terra satellite. The technique incorporates a threshold‐based decision tree image classification algorithm to process MODIS data and to determine the extent of ice. To differentiate between ice‐covered and ice‐free pixels within the riverbed, the algorithm combines observations in the visible and near‐infrared spectral bands. The developed technique presents the core of the MODIS‐based river ice mapping system, which has been developed to support National Oceanic and Atmospheric Administration NWS's operations. The system has been tested over the Susquehanna River in northeastern USA, where ice jam events leading to spring floods are a frequent occurrence. The automated algorithm generates three products: daily ice maps, weekly composite ice maps and running cloud‐free composite ice maps. The performance of the system was evaluated over nine winter seasons. The analysis of the derived products has revealed their good agreement with the aerial photography and with in situ observations‐based ice charts. The probability of ice detection determined from the comparison of the product with the high‐resolution Landsat imagery was equal to 91%. A consistent inverse relationship was found between the river discharge and the ice extent. The correlation between the discharge and the ice extent as determined from the weekly composite product reached 0.75. The developed CREST River Ice Observation System has been implemented at National Oceanic and Atmospheric Administration–Cooperative Remote Sensing Science and Technology Center as an operational Web tool allowing end users and forecasters to assess ice conditions on the river. Copyright © 2012 John Wiley & Sons, Ltd.     

Using very high resolution remote sensing for the management of coral reef fisheries: Review and perspectives

Coral reef fisheries are critical for food security and as a source of income in developing and developed countries, but they are collapsing in many areas. Following the emergence and routine availability of commercial very high spatial resolution (0.6-10 m) multispectral satellite images, we reviewed the use of these new high-quality remote sensing data and products for coral reef fisheries management. The availability of habitats maps improves management by guiding sampling strategies, mapping resources, involving local communities, identifying conservation areas, and facilitating Ecosystem Based Fishery Management (EBFM) approaches. However, despite their potential, very little use of products designed specifically for fishery management can be reported, likely due to high costs, inherent technology limitations and lack of awareness on the possibilities. Given the theoretical benefits brought by relevant habitat maps in EBFM frameworks, we advocate the use of adequate remote sensing products that integrate fishery technical services demands and local requirements.     

Bathymetric Structure‐from‐Motion: extracting shallow stream bathymetry from multi‐view stereo photogrammetry

Stream bathymetry is a critical variable in a number of river science applications. In larger rivers, bathymetry can be measured with instruments such as sonar (single or multi‐beam), bathymetric airborne LiDAR (light detection and ranging), or acoustic Doppler current profilers. However, in smaller streams with depths less than 2 m, bathymetry is one of the more difficult variables to map at high‐resolution. Optical remote sensing techniques offer several potential solutions for collecting high‐resolution bathymetry. In this research, I focus on direct photogrammetric measurements of bathymetry using multi‐view stereo photogrammetry, specifically Structure‐from‐Motion (SfM). The main barrier to accurate bathymetric mapping with any photogrammetric technique is correcting for the refraction of light as it passes between the two different media (air and water), which causes water depths to appear shallower than they are. I propose and test an iterative approach that calculates a series of refraction correction equations for every point/camera combination in a SfM point cloud. This new method is meant to address shortcomings of other correction techniques and works within the current preferred method for SfM data collection, oblique and highly convergent photographs. The multi‐camera refraction correction presented here produces bathymetric datasets with accuracies of ~0.02% of the flying height and precisions of ~0.1% of the flying height. This methodology, like many fluvial remote sensing methods, will only work under ideal conditions (e.g. clear water), but it provides an additional tool for collecting high‐resolution bathymetric datasets for a variety of river, coastal, and estuary systems. Copyright © 2016 John Wiley & Sons, Ltd.     

The threshold effect of image resolution on image‐based automated grain size mapping in fluvial environments

It has recently been demonstrated that surficial grain sizes in fluvial environments could be derived with automated methods applied to airborne digital imagery having a ground resolution of 3 cm. This letter seeks to further examine the potential of digital imagery for automated grain size mapping. In order to broaden the application of automated grain size mapping from airborne imagery, the effect of image resolution needs further study. Automated grain size mapping was attempted on an airborne digital image with a ground resolution of 10 cm. The results show that meaningful grain size information can be derived from 10 cm imagery. However, the ground resolution of the image acts as a size threshold below which no grain size information is detectable. Therefore, these results strongly suggest that future applications of automated grain size mapping will always be dependent on the ground resolution made available by the technology in use at the time of image acquisition. Copyright © 2005 John Wiley & Sons, Ltd.     

Regional hydromorphological characterization with continuous and automated remote sensing analysis based on VHR imagery and low‐resolution LiDAR data

Recent developments in remote sensing (RS) technologies lead the way in characterizing river morphology at regional scales and inferring potential channel responses to human pressures. In this paper, a unique regional database of continuous hydromorphological variables (HyMo DB) based on areal and topographic data has been generated from RS analysis. Key riverscape units with specific geomorphic meaning have been automatically mapped for 1700 km² of river floodplains from simultaneous very‐high‐resolution (VHR) near‐infrared aerial imagery and low‐resolution LiDAR‐derived products. A multi‐level, geographical object‐based architecture (GEOBIA) was employed to integrate both spectral and topographic information and generate a regional classifier able to automatically map heterogeneous fluvial patterns in different geographical and topographical contexts of the Piedmont Region (Italy). This HyMo‐generated DB offers a unique set of tools for hydromorphologists and can be exploited for different purposes. For the first time, topographic information can be exploited regionally per riverscape unit class, allowing for quantitative analysis of their regional spatial and statistical variability. In this manner, river types can be automatically characterized and classified using objective and repeatable hydromorphological variables. We discuss the potential of quantifying functional links between riverscape units and their driving processes, a valuable source of information to start assessing and highlighting the entity of potential channel adjustments at the regional scale to human pressures. The HyMo DB can also be integrated with historical, field‐based information to better comprehend current fluvial changes at a local scale. In view of future RS acquisitions, the present approach will result in a suitable procedure for quantitative, objective and continuous monitoring of river evolutions over large scales. This type of hydromorphological characterization will allow regional trends and patterns to be highlighted through time and river management strategies to thus be implemented at both regional and local scales. Copyright © 2016 John Wiley & Sons, Ltd.