Hydrogeomorphic processes of thermokarst lakes with grounded‐ice and floating‐ice regimes on the Arctic coastal plain,Alaska

Thermokarst lakes cover > 20% of the landscape throughout much of the Alaskan Arctic Coastal Plain (ACP) with shallow lakes freezing solid (grounded ice) and deeper lakes maintaining perennial liquid water (floating ice). Thus, lake depth relative to maximum ice thickness (1·5–2·0 m) represents an important threshold that impacts permafrost, aquatic habitat, and potentially geomorphic and hydrologic behaviour. We studied coupled hydrogeomorphic processes of 13 lakes representing a depth gradient across this threshold of maximum ice thickness by analysing remotely sensed, water quality, and climatic data over a 35‐year period. Shoreline erosion rates due to permafrost degradation ranged from < 0·2 m/year in very shallow lakes (0·4 m) up to 1·8 m/year in the deepest lakes (2·6 m). This pattern of thermokarst expansion masked detection of lake hydrologic change using remotely sensed imagery except for the shallowest lakes with stable shorelines. Changes in the surface area of these shallow lakes tracked interannual variation in precipitation minus evaporation (P ? E_L) with periods of full and nearly dry basins. Shorter‐term (2004–2008) specific conductance data indicated a drying pattern across lakes of all depths consistent with the long‐term record for only shallow lakes. Our analysis suggests that grounded‐ice lakes are ice‐free on average 37 days longer than floating‐ice lakes resulting in a longer period of evaporative loss and more frequent negative P ? E_L. These results suggest divergent hydrogeomorphic responses to a changing Arctic climate depending on the threshold created by water depth relative to maximum ice thickness in ACP lakes. Copyright © 2011 John Wiley & Sons, Ltd.     

Monitoring of the sediment dynamics along a sandy shoreline by means of airborne hyperspectral remote sensing and LIDAR: a case study in Belgium

Airborne hyperspectral data and airborne laserscan or LIDAR data were applied to analyse the sediment transport and the beach morphodynamics along the Belgian shoreline. Between 2000 and 2004, four airborne acquisitions were performed with both types of sensor. The hyperspectral data were classified into seven sand type classes following a supervised classification approach, in which feature selection served to reduce the number of bands in the hyperspectral data. The seven classes allowed us to analyse the spatial dynamics of specific sediment volumes. The technique made it possible to distinguish the sand used for berm replenishment works or for beach nourishments from the sand naturally found on the backshore and the foreshore. Subtracting sequential DTMs (digital terrain models) resulted in height difference maps indicating the erosion and accretion zones. The combination of both data types, hyperspectral data and LIDAR data, provides a powerful tool, suited to analyse the dynamics of sandy shorelines. The technique was demonstrated on three sites along the Belgian shoreline: Koksijde, located on the West Coast and characterized by wide accretional beaches, influenced by dry berm replenishment works and the construction of groins; Zeebrugge, on the Middle Coast, where a beach nourishment was executed one year before the acquisitions started and where the dams of the harbour of Zeebrugge are responsible for the formation of a large accretional beach, and Knokke‐Heist, located on the East Coast and characterized by narrow, locally reflective, beaches, heavily influenced by nourishment activities. The methodology applied allowed retrieval of the main sediment transport directions as well as the amount of sediment transported. It proved to be specifically suited to follow up the redistribution and the re‐sorting of the fill in beach nourishment areas. Copyright © 2007 John Wiley & Sons, Ltd.     

Three‐dimensional models of reservoir sediment and effects on the seismic response of arch dams

The important effects of bottom sediments on the seismic response of arch dams are studied in this paper. To do so, a three‐dimensional boundary element model is used. It includes the water reservoir as a compressible fluid, the dam and unbounded foundation rock as viscoelastic solids, and the bottom sediment as a two‐phase poroelastic domain with dynamic behaviour described by Biot's equations. Dynamic interaction among all those regions, local topography and travelling wave effects are taken into account. The results obtained show the important influence of sediment compressibility and permeability on the seismic response. The former is associated with a general change of the system response whereas the permeability has a significant influence on damping at resonance peaks. The analysis is carried out in the frequency domain considering time harmonic excitation due to P and S plane waves. The time‐domain results obtained by using the Fourier transform for a given earthquake accelerogram are also shown. The possibility of using simplified models to represent the bottom sediment effects is discussed in the paper. Two alternative models for porous sediment are tested. Simplified models are shown to be able to reproduce the effects of porous sediments except for very high permeability values. Copyright © 2004 John Wiley & Sons, Ltd.     

Impact of model free parameters and sea-level rise uncertainties on 20-years shoreline hindcast: the case of Truc Vert beach (SW France)

Shoreline change is driven by various complex processes interacting at a large range of temporal and spatial scales, making shoreline reconstructions and predictions challenging and uncertain. Despite recent progress in addressing uncertainties related to the physics of sea-level rise, very little effort is made towards understanding and reducing the uncertainties related to wave-driven shoreline response. To fill this gap, the uncertainties associated with the long-term modelling of shoreline change are analysed at a high-energy cross-shore transport dominated site. Using the state-of-the-art LX-Shore shoreline change model, we produce a probabilistic shoreline reconstruction, based on 3000 simulations over the past 20 years at Truc Vert beach, southwest France, whereby sea-level rise rate, depth of closure and three model free parameters are considered uncertain variables. We further address the relative impact of each source of uncertainty on the model results performing a Global Sensitivity Analysis. This analysis shows that the shoreline changes are mainly sensitive to the three parameters of the wave-driven model, but also that the sensitivity to each of these parameters is strongly modulated seasonally and interannually, in relation with wave energy variability, and depends on the time scale of interest. These results have strong implications on the model skill sensitivity to the calibration period as well as for the predictive skill of the model in a context of future climate change affecting wave climate and extremes. © 2020 John Wiley & Sons, Ltd.     

Soil erosion and sediment interception by check dams in a watershed for an extreme rainstorm on the Loess Plateau,China

The magnitude of soil erosion and sediment load reduction efficiency of check dams under extreme rainstorms is a long-standing concern. The current paper aims to use check dams to deduce the amount of soil erosion under extreme rainstorms in a watershed and to identify the difference in sediment interception efficiency of different types of check dams. Based on the sediment deposition at 12 check dams with 100% sediment interception efficiency and sub-catchment clustering by taking 12 dam-controlled catchments as clustering criteria, the amount of soil erosion resulting from an extreme rainstorm event on July 26, 2017 (named “7·26” extreme rainstorm) was estimated in the Chabagou watershed in the hill and gully region of the Loess Plateau. The differences in the sediment interception efficiency among the check dams in the watershed were analyzed according to field observations at 17 check dams. The results show that the average erosion intensity under the “7–26” extreme rainstorm was approximately 2.03 × 10⁴ t/km², which was 5 times that in the second largest erosive rainfall in 2017 (4.15 × 10³ t/km²) and 11–384 times that for storms in 2018 (0.53 × 10² t/km² - 1.81 × 10³ t/km²). Under the “7–26” extreme rainstorm, the amount of soil erosion in the Chabagou watershed above the Caoping hydrological station was 4.20 × 10⁶ t. The sediment interception efficiency of the check dams with drainage canals (including the destroyed check dams) and with drainage culverts was 6.48 and 39.49%, respectively. The total actual sediment amount trapped by the check dams was 1.11 × 10⁶ t, accounting for 26.36% of the total amount of soil erosion. In contrast, 3.09 × 10⁶ t of sediment were input to the downstream channel, and the sediment deposition in the channel was 2.23 × 10⁶ t, accounting for 53.15% of the total amount of soil erosion. The amount of sediment transport at the hydrological station was 8.60 × 10⁵ t. The Sediment Delivery Ratio (SDR) under the “7·26” extreme rainstorm was 0.21. The results indicated that the amount of soil erosion was huge, and the sediment interception efficiency of the check dams was greatly reduced under extreme rainstorms. It is necessary to strengthen the management and construction technology standards of check dams to improve the sediment interception efficiency and flood safety in the watershed.     

Modeling of the effect of flow depth on sediment discharged by rain‐impacted flows from sheet and interrill erosion areas: a review

Sediment, nutrients and pollutants discharged from sheet and interrill erosion areas by rain‐impacted flows may influence water quality in streams and rivers. The depth of water on the soil surface influences the capacity of raindrop impacts to detach soil material underlying rain‐impacted flows, and a number of so‐called process‐based and mechanistic models erroneously use equations on the basis of the effect of water depth on splash erosion to account for this effect. Also, a number of these models require complex mathematical solutions to make them operate and can only predict sediment composition and discharges well if many of their parameters are calibrated specifically to the situations where they are being applied. Experiments with rain‐impacted flows, where flow depth and velocity over eroding surfaces have been controlled, have been reported in the literature and provide more appropriate equations to account for the drop size – flow depth interactions that affect detachment and transport of particles in rain‐impacted flows. There is a need to develop modeling approaches that rely on relevant data obtained under well‐controlled flow conditions where flow depths and velocities are known. Copyright © 2012 John Wiley & Sons, Ltd.     

Occurrence of perfluorinated compounds in water, sediment and mussels from the Cantabrian Sea (North Spain)

Perfluorinated compounds (PFCs) have emerged as significant global environmental pollutants with persistent, bioaccumulative and toxic properties. The aim of this study was to determine the occurrence of PFCs in water (wastewater, submarine emissaries and port-waters), sediment and transplanted mussels in estuarine areas of high urban and industrial impact from Northern Spain. Five PFCs of industrial use were studied: perfluorooctanesulfonate, perfluorohexanesulfonate, perfluorobutanesulfonate, perfluorooctanoate acid and perfluorononanoate acid. After selective extraction, samples were analyzed by Ultra Performance Liquid Chromatography coupled to tandem mass spectrometry. ΣPFCs ranged from 0.06 to 10.9 ng/L in water, with higher levels in wastewater treatment plants effluents and port waters than in submarine emissaries. Little accumulation was observed in sediments and mussels with ΣPFCs ranging from 0.01-0.13 ng/g dw and 0.01-0.06 ng/g ww, respectively. Most ubiquitous compounds were PFOS and PFOA. Mass fluxes of PFCs to the Cantabrian Sea are estimated and the impact to the coastal ecosystem is discussed.     

The behavior of specific sediment yield in different grain size fractions in the tributaries of the middle Yellow River as influenced by eolian and fluvial processes

Based on data from 35 stations on the tributaries of the Yellow River, annual specific sediment yield (Y_s) in eight grain size fractions has been related to basin‐averaged annual sand–dust storm days (D_ss) and annual precipitation (P_m) to reveal the influence of eolian and fluvial processes on specific sediment yield in different grain size fractions. The results show that Y_s in fine grain size fractions has the highest values in the areas dominated by the coupled wind–water process. From these areas to those dominated by the eolian process or to those dominated by the fluvial process, Y_s tends to decrease. For relatively coarse grain size fractions, Y_s has monotonic variation, i.e. with the increase in D_ss or the decrease in P_m, Y_s increases. This indicates that the sediment producing behavior for fine sediments is different from that for relatively coarse sediments. The results all show that Y_s for relatively coarse sediments depends on the eolian process more than on the fluvial process, and the coarser the sediment fractions the stronger the dependence of the Y_s on the eolian process. The Y_s–D_ss and Y_s–P_m curves for fine grain size fractions show some peaks and the fitted straight lines for Y_s–D_ss and Y_s–P_m relationships for relatively coarse grain size fractions show some breaks. Almost all these break points may be regarded as thresholds. These thresholds are all located in the areas dominated by the coupled wind–water process, indicating that these areas are sensitive for erosion and sediment production, to which more attention should be given for the purpose of erosion and sediment control. A number of regression equations were established, based which the effect of rainfall, sand–dust storms and surface material grain size on specific sediment yield can be assessed. Copyright © 2007 John Wiley & Sons, Ltd.     

鄱阳湖湖口、外洲、梅港三站水沙变化及趋势分析(1955-2001年)

对鄱阳湖流域三个主要控制站湖口、外洲和梅港多年(1955-2001年)水沙数据进行了统计分析,利用滑动平均法,Spearman秩次相关检验、线性回归检验方法对三个测站的水沙变化趋势进行了分析检验,结果表明,鄱阳湖泥沙出湖集中于长江大汛前的2-6月,在长江7-9月大汛期间,会出现长江泥沙倒灌鄱阳湖的情况．湖口站近期(1990-2001年)径流量和输沙量变幅都非常大,同上世纪80年代相比,年均径流量增加255．3×10~8 m~3．年均减少沙量0．29×10~8 t;外洲站近期的输沙量明显减少,沙量分别为70年代前、70年代、80年代的49．6%、48．7%和52．3%;梅港站径流量略微增加沙量无明显变化趋势．从入湖径流来看,赣江和信江占52．4%,入湖泥沙量占了76．0%以上．从赣江和信江水沙总体变化趋势来看,赣江径流量变化趋势不明显,而输沙量具有明显减少的趋势;信江径流量增加趋势明显,输沙量基本无明显趋势．鄱阳湖流域水沙变化主要受人类活动的影响．土地利用方式的改变和流域水利工程设施的修建极大地影响了流域水沙特征及其变化趋势．     

Impacts of headcut height on flow energy,sediment yield and surface landform during bank gully erosion processes in the Yuanmou Dry‐hot Valley region,southwest China

To quantify the changes in flow energy, sediment yield and surface landform impacted by headcut height during bank gully erosion, five experimental platforms were constructed with different headcut heights ranging from 25 to 125 cm within an in situ active bank gully head. A series of scouring experiments were conducted under concentrated flow and the changes in flow energy, sediment yield and surface landform were observed. The results showed that great energy consumption occurred at gully head compared to the upstream area and gully bed. The flow energy consumption at gully heads and their contribution rates increased significantly with headcut height. Gully headcuts also contributed more sediment yield than the upstream area. The mean sediment concentrations at the outlet of plots were 2.3 to 7.3 times greater than those at the end of upstream area. Soil loss volume at gully heads and their contribution rates also increased with headcut height significantly. Furthermore, as headcut height increased, the retreat distance of gully heads increased, which was 1.7 to 8.9 times and 1.1 to 3.2 times greater than the incision depth of upstream area and gully beds. Positive correlations were found between energy consumption and soil loss, indicating that energy consumption could be used to estimate soil loss of headcut erosion. Headcut height had a significant impact on flow energy consumption, and thus influenced the changes in sediment yield and landform during the process of gully headcut erosion. Headcut height was one of the important factors for gully erosion control in this region. Further studies are needed to identify the role of headcut height under a wide condition. Copyright © 2018 John Wiley & Sons, Ltd.     

Contributions of slab fluid and sediment melt components to magmatism in the Mariana Arc–Trough system: Evidence from geochemical compositions and Sr,Nd, and noble gas isotope systematics

This study presents new major and trace element, mineral, and Sr, Nd, and noble gas isotope geochemical analyses of basalts, gabbro, and clinopyroxenite from the Mariana Arc (Central Islands and Southern Seamount provinces) including the forearc, and the Mariana Trough (Central Graben and Spreading Ridge). Mantle source compositions beneath the Mariana Arc and the Mariana Trough indicate a mantle source that is depleted in high field strength elements relative to MORB (mid‐oceanic ridge basalt). Samples from the Mariana Arc, characterized by high ratios of Ba/Th, U/Th, ⁸⁴Kr/⁴He and ¹³²Xe/⁴He, are explained by addition of fluid from the subducted slab to the mantle wedge. Correlations of noble gas data, as well as large ion lithophile elements, indicate that heavy noble gases (Ar, Kr, and Xe) provide evidence for fluid fluxing into the mantle wedge. On the other hand, major elements and Sr, Nd, He, and Ne isotopic data of basalts from the Mariana Trough are geochemically indistinguishable from MORB. Correlations of ³He/⁴He and ⁴⁰Ar/³⁶Ar in the Mariana Trough samples are explained by mixing between MORB and atmosphere. One sample from the Central Graben indicates extreme enrichment in ²⁰Ne/²²Ne and ²¹Ne/²²Ne, suggesting incorporation of solar‐type Ne in the magma source. Excess ¹²⁹Xe is also observed in this sample suggesting primordial noble gases in the mantle source. The Mariana Trough basalts indicate that both fluid and sediment components contributed to the basalts, with slab‐derived fluids dominating beneath the Spreading Ridge, and that sediment melts, characterized by high La/Sm and relatively low U/Th and Zr/Nb, dominate in the source region of basalts from the Central Graben.     

Magma contamination by direct wall rock interaction: constraints from xenoliths from the walls of a carbonate-hosted magma chamber (Vesuvius 1944 eruption)

During the 1944 eruption of Vesuvius different types of xenoliths were ejected. They represent fragments of the walls of a low volume (<0.5 km³) shallow (3–4 km depth) magma chamber. The study of these xenoliths enables us to estimate the amount of contamination occurring at the boundary of a high-T alkaline magma chamber hosted in carbonate rocks. The process of contamination of the magma by carbonates can be modelled, using isotopic and chemical data, as a mixing between magma and marbles. Mass exchanges occur at the boundary between the crystallizing magma and marble wall rocks, where endoskarn forms. The contamination of the solidification front of the chamber is very limited. The solidification front and the skarn shell effectively isolate the interior of the magma chamber from new inputs of contaminants from the carbonate wall rocks. Therefore, the main volume of magma, hosted in the magma chamber, did not undergo any significant mass exchange with the wall rocks.     

SHRIMP U–Pb ages of detrital zircons from the Early Cretaceous Nakdong Formation,South East Korea: Timing of initiation of the Gyeongsang Basin and its provenance

To constrain the depositional age of the lowermost Nakdong Formation in the Early Cretaceous Gyeongsang Basin, SHRIMP U–Pb age determination was carried out on zircon separates. The U–Pb compositions of detrital zircons from the Nakdong Formation yield a wide range of ages from the Archean to the Cretaceous but show a marked contrast in age distribution according to the geographical locations within the basin. The provenance of the southern Nakdong Formation is dominantly the surrounding Yeongnam Massif, which is composed of Paleoproterozoic metamorphic rocks and Triassic to Jurassic plutonic rocks, whereas the central to northern Nakdong Formation records significant sediment derivation from the Okcheon Metamorphic Belt, which is distributed to the northwest, in addition to the contribution from the Yeongnam Massif. It is suggested that the maximum depositional age of the Nakdong Formation is ca 127 Ma, based on its youngest detrital zircon age population. The onset of its deposition at 127 Ma coincided with the tectonic inversion in East Asia from a compressional to an extensional geodynamic setting, probably due to the contemporaneous change in the drift direction of the Izanagi Plate and its subsequent oblique subduction.     

Up‐scaling potential impacts on water flows from agricultural water interventions: opportunities and trade‐offs in the Osman Sagar catchment,Musi sub‐basin,India

Agricultural water management (AWM) has been shown to improve and secure yields in the tropics and has been suggested as an important way to combat poverty in the region. In this paper, we describe potential impacts on upstream and downstream flows of extensive AWM interventions, using the watershed development programme of the Osman Sagar catchment of Musi sub‐basin, Andhra Pradesh semi‐arid India, as an example. Various AWM interventions are compared with a non‐intervention state and the current state of the study area, using 31 years of data by application of the calibrated and validated ARCSWAT 2005 (Version 2.1.4a) modelling tool. Different AWM interventions contribute to improved livelihoods of upstream smallholder farmers by increasing soil moisture availability and groundwater recharge, which can subsequently be used for irrigation. The result is higher crop production and hence larger incomes. Moreover, lower flow intensities and sediment losses reduced by 30–50%, reducing the risk of flooding and sediment accumulation in the Osman Sagar drinking water reservoir. On the other hand, AWM interventions are predicted to result in reduced total water inflows to the Osman Sagar reservoir from 11% of the total annual rainfall (754 mm) recorded at present, to 8% if AWM interventions were implemented at large scale throughout the catchment. A cost–benefit analysis of AWM interventions showed that the highest net economic returns were achieved at intermediate intervention levels (only in‐situ AWM). Copyright © 2012 John Wiley & Sons, Ltd.     

Petrogenesis and geodynamic significance of the Ganhe Formation lavas,eastern Great Xing'an Range,China: Evidence from geochemistry and geochronology

Mesozoic volcanic rocks are widespread throughout the Great Xing'an Range of northeastern China. However, there has been limited investigation into the age and petrogenesis of the Mesozoic volcanics in the eastern Great Xing'an Range. According to our research, the volcanic rocks of the Dayangshu Basin, eastern Great Xing'an Range are composed mainly of trachybasalt, basaltic andesite, and basaltic trachyandesite, with minor intermediate–basic pyroclastic rocks. In this study, the geochemistry and geochronology of the Mesozoic volcanic rocks are presented in order to discuss the petrogenesis and tectonic setting of the Ganhe Formation in the Dayangshu Basin. Zircon U–Pb dating by laser ablation inductively coupled plasma–mass spectrometry indicates that the Mesozoic lavas formed during the late Early Cretaceous (114.3–108.8 Ma). This suite of rocks exhibits a range of geochemical signatures indicating subduction‐related genesis, including: (i) calc‐alkaline to high‐K calc‐alkaline major element compositions; (ii) enrichment of large ion lithophile elements (e.g. Rb, Ba, K) and light rare earth elements (LREEs/HREEs =7.33–9.85); and (iii) weak depletion in high field strength elements (e.g. Nb, Ta, Ti). Furthermore, Sr–Nd–Pb isotopic data yield initial ⁸⁷Sr/⁸⁶Sr values of 0.70450–0.70463, positive ε_Nd(t) values of +1.8 to +3.3, and a mantle‐derived lead isotope composition. Combined with the regional tectonic evolution, the results of this study suggest that the Ganhe Group lavas are derived from decompression melting of a metasomatized (enriched) lithospheric mantle, related to asthenospheric upwelling, which resulted from lithospheric mantle delamination and produced extension of the continental margin following the subduction of the Paleo‐Pacific Plate.     

Denudation history of the Kiso Range,central Japan,and its tectonic implications: Constraints from low‐temperature thermochronology

Fission‐track (FT) and (U–Th–Sm)/He (He) analyses are used to constrain the denudation pattern and history of the Kiso Range, a Japanese fault‐block mountain range which has been uplifted since ca 0.8 Ma. We obtained nine zircon FT ages ranging 59.3–42.1 Ma, 18 apatite FT ages ranging 81.9–2.3 Ma, and 13 apatite He ages ranging 36.7–2.2 Ma. The apatite FT and He ages are divided into an older group comparable to the zircon FT age range and a younger group of <18 Ma. The younger ages are interpreted as a reflection of uplift of the Kiso Range because they were obtained only to the east of the Seinaiji‐touge Fault, and the event age estimated from apatite FT data is consistent with the timing of the onset of the Kiso Range uplift. On the basis of the distribution of the younger ages, we propose westward tilting uplift of the Kiso Range between the boundary fault of the Inadani Fault Zone and Seinaiji‐touge Fault, which implies a model of bedrock uplift that is intermediate between two existing models: a pop‐up model in which the Kiso Range is squeezed upward between the two faults and a tilted uplift model which assumes that the Kiso Range is uplifted and tilted to the west by the Inadani Fault Zone. The original land surface before the onset of uplift/denudation of the Kiso Range is estimated to have been uplifted to an elevation of 2700–4900 m. We estimated denudation rates at 1.3–4.0 mm/y and maximum bedrock uplift rates at 3.4–6.1 mm/y since ca 0.8 Ma. The Seinaiji‐touge fault is interpreted as a back thrust of the west‐dipping Inadani Fault Zone. The older group of apatite FT and He ages is interpreted to reflect long‐term peneplanation with a probable denudation rate of <0.1 mm/y.     

Statistical interpolation of ozone measurements from satellite data (TOMS, SBUV and SAGE II) using the kriging method

This study demonstrates that ordinary kriging in spherical coordinates using experimental semi-variograms provides highly usable results, especially near the pole in winter and/or where there could be data missing over large areas. In addition, kriging allows display of the spatial variability of daily ozone measurements at different pressure levels. Three satellite data sets were used: Total Ozone Mapping Spectrometer (TOMS) data, Solar Backscattered UltraViolet (SBUV), and the Stratospheric Aerosol and Gas Experiment (SAGE II) ozone profiles. Since SBUV is a nadir-viewing instrument, measurements are only taken along the sun-synchronous polar orbits of the satellite. SAGE II is a limb-viewing solar occultation instrument, and measurements have high vertical resolution but poor daily coverage. TOMS has wider coverage with equidistant distribution of data (resolution 1° × 1.25°) but provides no vertical information. Comparisons of the resulting SBUV-interpolated (column-integrated) ozone field with TOMS data are strongly in agreement, with a global correlation of close to 98%. Comparisons of SBUV-interpolated ozone profiles with daily SAGE II profiles are relatively good, and comparable to those found in the literature. The interpolated ozone layers at different pressure levels are shown.     

Fission track and U–Pb zircon ages of psammitic rocks from the Harushinai unit,Kamuikotan metamorphic rocks,central Hokkaido,Japan: constraints on metamorphic histories

Accurate pressure–temperature–time (P–T–t) paths of rocks from sedimentation through maximum burial to exhumation are needed to determine the processes and mechanisms that form high‐pressure and low‐temperature type metamorphic rocks. Here, we present a new method combining laser ablation–inductively coupled plasma–mass spectrometry (LA–ICP–MS) U–Pb with fission track (FT) dates for detrital zircons from two psammitic rock samples collected from the Harushinai unit of the Kamuikotan metamorphic rocks. The concordant zircon U–Pb ages for these samples vary markedly, from 1980 to 95 Ma, with the youngest age clusters in both samples yielding Albian‐Cenomanian weighted mean ages of 100.8 ± 1.1 and 99.3 ± 1.0 Ma (2σ uncertainties). The zircon U–Pb ages were not reset by high‐P/T type metamorphism, because there is no indication of overgrowth within the zircons with igneous oscillatory zoning. Therefore, these weighted mean ages are indicative of the maximum age of deposition of protolithic material. By comparison, the zircon FT data yield a pooled age of ca. 90 Ma, which is almost the same as the weighted mean age of the youngest U–Pb age cluster. This indicates that the zircon FT ages were reset at ca. 90 Ma while still at their source, but have not been reset since. This conclusion is supported by recorded temperature conditions of less than about 300 °C (the closure temperature of zircon FTs), as estimated from microstructures in the deformed detrital quartz grains in psammitic rocks, and no shortening of fission track lengths in the zircon. Combining these new data with previously reported white mica K–Ar ages indicates that the Harushinai unit was deposited after ca. 100 Ma, and underwent burial to its maximum depth before being subjected to a localized thermal overprint during exhumation at ca. 58 Ma.     

Time-scales of assembly and thermal history of a composite felsic pluton: constraints from the Emerald Lake area, northern Canadian Cordillera, Yukon

Knowledge of the time-scales of emplacement and thermal history during assembly of composite felsic plutons in the shallow crust are critical to deciphering the processes of crustal growth and magma chamber development. Detailed petrological and chemical study of the mid-Cretaceous, composite Emerald Lake pluton, from the northern Canadian Cordillera, Yukon Territory, coupled with U–Pb and ⁴⁰Ar/³⁹Ar geochronology, indicates that this pluton was intruded as a series of magmatic pulses. Intrusion of these pulses produced a strong petrological zonation from augite syenite, hornblende quartz syenite and monzonite, to biotite granite. Our data further indicate that multiple phases were emplaced and cooled to below the mineral closure temperatures over a time-scale on the order of the resolution of the ⁴⁰Ar/³⁹Ar technique (1 Myr), and that emplacement occurred at 94.3 Ma. Simple thermal modelling and heat conduction calculations were used to further constrain the temporal relationships within the intrusion. These calculations are consistent with the geochronology and show that emplacement and cooling were complete in less than 100 kyr and probably 70±5 kyr. These results demonstrate that production, transport and emplacement of the different phases of the Emerald Lake pluton occurred essentially simultaneously, and that these processes must also have been closely related in time and space. By analogy, these results provide insights into the assembly and petrogenesis of other complex intrusions and ultimately lead to an understanding of the processes involved in crustal development.