Channel geometry of mountain streams in New Zealand

A dataset of 21 study reaches in the Porter and Kowai rivers (eastern side of the South Island), and 13 study reaches in Camp Creek and adjacent catchments (western side of the South Island) was used to examine downstream hydraulic geometry of mountain streams in New Zealand. Streams in the eastern and western regions both exhibit well-developed downstream hydraulic geometry, as indicated by strong correlations between channel top width, bankfull depth, mean velocity, and bankfull discharge. Exponents for the hydraulic geometry relations are similar to average values for rivers worldwide. Factors such as colluvial sediment input to the channels, colluvial processes along the channels, tectonic uplift, and discontinuous bedrock exposure along the channels might be expected to complicate adjustment of channel geometry to downstream increases in discharge. The presence of well-developed downstream hydraulic geometry relations despite these complicating factors is interpreted to indicate that the ratio of hydraulic driving forces to substrate resisting forces is sufficiently large to permit channel adjustment to relatively frequent discharges.     

Variation in hydraulic geometry for stable versus incised streams in the Yazoo River basin-USA

The effects of basin hydrology on hydraulic geometry of channels variability for incised streams were investigated using available field data sets and models of watershed hydrology and channel hydraulics for the Yazoo River basin,USA.The study presents the hydraulic geometry relations of bankfull discharge,channel width,mean depth,cross-sectional area,longitudinal slope,unit stream power,and mean velocity at bankfull discharge as a function of drainage area using simple linear regression.The hydraulic geometry relations were developed for 61 streams,20 of them are classified as channel evolution model(CEM) Types Ⅳ and Ⅴ and 41 of them are CEM streams Types Ⅱ and Ⅲ.These relationships are invaluable to hydraulic and water resources engineers,hydrologists,and geomorphologists involved in stream restoration and protection.These relations can be used to assist in field identification of bankfull stage and stream dimension in un-gauged watersheds as well as estimation of the comparative stability of a stream channel.A set of hydraulic geometry relations are presented in this study,these empirical relations describe physical correlations for stable and incised channels.Cross-sectional area,which combines the effects of channel width and mean channel depth,was found to be highly responsive to changes in drainage area and bankfull discharge.Analyses of cross-sectional area,channel width,mean channel depth,and mean velocity in conjunction with changes in drainage area and bankfull discharge indicated that the channel width is much more responsive to changes in both drainage area and bankfull discharge than are mean channel depth or mean velocity.     

The form and function of headwater streams based on field and modeling investigations in the southern Appalachian Mountains

Headwater streams drain the majority of most landscapes, yet less is known about their morphology and sediment transport processes than for lowland rivers. We have studied headwater channel form, discharge and erosive power in the humid, moderate‐relief Valley and Ridge and Blue Ridge provinces of the Appalachian Mountains. Field observations from nine headwater (<2 km² drainage area), mixed bedrock–alluvial channels in a variety of boundary conditions demonstrate variation with respect to slope‐area channel initiation, basic morphology, slope distribution, hydraulic geometry, substrate grain size and role of woody debris. These channels display only some of the typical downstream trends expected of larger, lowland rivers. Variations are controlled mainly by differences in bedrock resistance, from the formation level down to short‐wavelength, outcrop‐scale variations. Hydrologic modeling on these ungauged channels estimates the recurrence of channel‐filling discharge and its ability to erode the channel bed. Two‐year recurrence discharge is generally larger and closer to bankfull height in the Valley and Ridge, due to low soil infiltration capacity. Discharge that fills the channel to its surveyed bankfull form is variable, generally exceeding two‐year flows at small drainage areas (<0·5 km²) and being exceeded by them at greater drainage areas. This suggests bankfull is not controlled by the same recurrence storm throughout a channel or physiographic region. Stream power and relative competence are also variable. These heterogeneities contrast relations observed in larger streams and illustrate the sensitivity of headwater channels to local knickpoints of resistant bedrock and armoring of channels by influx of coarse debris from hillslopes. The general lack of predictable trends or functional relationships among hydraulic variables and the close coupling of channel form and function with local boundary conditions indicate that headwater streams pose a significant challenge to landscape evolution modeling. Copyright © 2005 John Wiley & Sons, Ltd.     

Reach‐scale channel geometry of a mountain river

Mountain rivers can be subject to strong constraints imposed by changes in gradient and grain size supplied by processes such as glaciation and rockfall. Nonetheless, adjustments in the channel geometry and hydraulics of mountain rivers at the reach scale can produce discernible patterns analogous to those in fully alluvial rivers. Mountain rivers can differ in that imposed reach‐scale gradient is an especially important control on reach‐scale channel characteristics, as indicated by examination of North St Vrain Creek in Colorado. North St Vrain Creek drains 250 km² of the Rocky Mountains. We used 25 study reaches within the basin to examine controls on reach‐scale channel geometry. Variables measured included channel geometry, large woody debris, grain size, and mean velocity. Drainage area at the study reaches ranged from 2·2 to 245 km², and gradient from 0·013 to 0·147 m m^?1. We examined correlations among (1) potential reach‐scale response variables describing channel bankfull dimension and shape, hydraulics, bedform wavelength and amplitude, grain size, ?ow resistance, standard deviation of hydraulic radius, and volume of large woody debris, and (2) potential control variables that change progressively downstream (drainage area, discharge) or that are likely to re?ect a reach‐speci?c control (bed gradient). We tested the hypothesis that response variables correlate most strongly with local bed gradient because of the segmented nature of mountain channels. Results from simple linear regression analyses indicate that most response variables correlate best with gradient, although channel width and width/depth ratio correlate best with discharge. Multiple regression analyses using Mallow's C_p selection criterion and log‐transformation of all variables produced similar results in that most response variables correlate strongly with gradient. These results suggest that the hypothesis is partially supported: channel bed gradient is likely to be a good predictor for many reach‐scale response variables along mountain rivers, but discharge is also an important predictor for some response variables. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydraulic geometry and maximum flow efficiency as products of the principle of least action

Basic flow relationships have previously been seen to be insufficient to explain the self‐adjusting mechanism of alluvial channels and as a consequence extremal hypotheses have been incorporated into the analyses. In contrast, this study finds that by introducing a channel form factor (width/depth ratio), the self‐adjusting mechanism of alluvial channels can be illustrated directly with the basic flow relations of continuity, resistance and sediment transport. Natural channel flow is able to reach an optimum state (Maximum Flow Efficiency (MFE), defined as the maximum sediment transporting capacity per unit available stream power) with regard to the adjustment of channel form such that rivers exhibit regular hydraulic geometry relations at dominant or bankfull stage. Within the context of MFE, this study offers support for the use of the concepts of maximum sediment transporting capacity (MSTC) and minimum stream power (MSP). Furthermore, this study indicates that the principle of least action is able to provide a physical explanation for the existence of MFE, MSTC and MSP. Potential energy is minimized and consequently sediment transport is maximized in alluvial channels. Copyright © 2000 John Wiley & Sons, Ltd.     

Developing channel and floodplain dimensions with limited data: a case study in the Amazon Basin

This research builds on the concept of hydraulic geometry and presents a methodology for estimating bankfull discharge and the hydraulic geometry coefficients and exponents for a station using limited data; only stage‐discharge and Landsat imagery. The approach is implemented using 82 streamflow gauging locations in the Amazon Basin. Using the estimated values for the hydraulic geometry relations, bankfull discharge, discharge data above bankfull and upstream drainage area at each site, relationships for estimating channel and floodplain characteristics as a function of drainage area are developed. Specifically, this research provides relationships for estimating bankfull discharge, bankfull depth, bankfull width, and floodplain width as a function of upstream drainage area in the Amazon Basin intended for providing reasonable cross‐section estimates for large scale hydraulic routing models. The derived relationships are also combined with a high resolution drainage network to develop relationships for estimating cumulative upstream channel lengths and surface areas as a function of the specified minimum channel width ranging from 2 m to 1 km (i.e. threshold drainage areas ranging from 1 to 431,000 km²). At the finest resolution (i.e. all channels greater than 2 m or a threshold area of 1 km²), the Amazon Basin contains approximately 4.4 million kilometers of channels with a combined surface area of 59,700 km². The intended use of these relationships is for partitioning total floodable area (channels versus lakes and floodplain lakes) obtained from remote sensing for biogeochemical applications (e.g. quantifying CO₂ evasion in the Amazon Basin). Copyright © 2011 John Wiley & Sons, Ltd.     

Threshold response of small streams to surface coal mining,bituminous coal fields,central Pennsylvania

Stream response to surface coal mining and reclamation was studied in 29 small (0·13 to 5·72 km²) watersheds located in the bituminous coal fields of Central Pennsylvania. These basins, up to 82 per cent mined, were selected from 176 first-order tributaries of Beech Creek with similar vegetation, soil, lithology, and basin characteristics. Measurements were made at 262 cross-sections (an average of nine cross-sections per stream) of channel cross-section area, bankfull width, mean bankfull depth, dimensions of the largest moving blocks, stream slope, valley-side slope, basin area, and mined area. Observed differences in channel morphology were related to differences in extent of mining by means of scatter plots, correlation, cluster analysis, and bivariate regression. Stream response to increased peak discharge and channel shear stress produced by increased surface runoff from regraded mine spoil takes the form of enlarged channels and increases in the size of moving blocks. Large basin areas appear to dampen the effect of mining, resulting in limited channel enlargement with greater extent of mining. In contrast, where peak discharges and associated shear stresses exceed the combined erosional resistance of floodplain vegetation, colluvial blocks, and channel banks, streams adjust extensively to higher levels of mining, causing an abrupt increase in the size of transported blocks and eroded channels. In the first-order basins studied, this stepped response occurs at approximately 0·45 km² mined area and 50 per cent of the total basin area mined. For streams that have exceeded both threshold levels, disequilibrium is demonstrated by a strong, positive correlation between local stream slope and basin area. Where both threshold levels of mining are exceeded, steep channel slopes reinforce the tendency of stream cross-sections to increase with greater disturbance by mining, necessitating that these streams rapidly adjust their morphology in order to attain a new equilibrium which is compatible with the conditions imposed by mining and reclamation.     

Geomorphic response of the Jingjiang Reach to the Three Gorges Project operation

Upstream damming often causes significant downstream geomorphic adjustments. Remarkable channel changes have occurred in the Jingjiang Reach of the Middle Yangtze River, since the onset of the Three Gorges Project (TGP). Therefore, it is important to investigate the variations in different fluvial variables, for better understanding of the channel evolution characteristics as an example of the Jingjiang Reach. Recent geomorphic adjustments in the study reach have been investigated quantitatively, including variations in sediment rating curve, fluvial erosion intensity, channel deformation volume and bankfull channel geometry. These fluvial variables adjusted in varying degrees in response to the altered flow and sediment regime caused by the TGP operation. A focus of this study has been especially on variation in the bankfull channel geometry. Calculated bankfull dimensions at section‐ and reach‐scale indicate that: (i) there were significant bank‐erosion processes in local regions without bank‐protection engineering, with empirical relations being developed to reproduce the variation in bankfull widths at four typical sections; (ii) the variation in the reach‐scale channel geometry occurred mainly in the component of bankfull depth, owing to the construction of large‐scale bank‐revetment works, with the depth increasing from 13.7 m in 2002 to 15.0 m in 2014, and with an increase in the corresponding bankfull area of about 11%; and (iii) the reach‐scale bankfull channel dimensions responded to the previous 5‐year average fluvial erosion intensity during flood seasons at Zhicheng, with higher correlations for the depth and area being obtained when calibrated by the measurements in 2002–2012. Furthermore, these relations developed for the section‐ and reach‐scale bankfull channel geometry were also verified by the observed data in 2013–2014, with encouraging results being obtained. Copyright © 2016 John Wiley & Sons, Ltd.     

Assessing the effect of vegetation‐related bank strength on channel morphology and stability in gravel‐bed streams using numerical models

Bank strength due to vegetation dominates the geometry of small stream channels, but has virtually no effect on the geometry of larger ones. The dependence of bank strength on channel scale affects the form of downstream hydraulic geometry relations and the meandering‐braiding threshold. It is also associated with a lateral migration threshold discharge, below which channels do not migrate appreciably across their floodplains. A rational regime model is used to explore these scale effects: it parameterizes vegetation‐related bank strength using a dimensionless effective cohesion, C_r*. The scale effects are explored primarily using an alluvial state space defined by the dimensionless formative discharge, Q*, and channel slope, S, which is analogous to the Q–S diagrams originally used to explore meandering‐braiding thresholds. The analyses show that the effect of vegetation on both downstream hydraulic geometry and the meandering‐braiding threshold is strongest for the smallest streams in a watershed, but that the effect disappears for Q* > 10⁶. The analysis of the migration threshold suggests that the critical discharge ranges from about 5 m³/s to 50 m³/s, depending on the characteristic rooting depth for the vegetation. The analysis also suggests that, where fires frequently affect riparian forests, channels may alternate between laterally stable gravel plane‐bed channels and laterally active riffle‐pool channels. These channels likely do not exhibit the classic dynamic equilibrium associated with alluvial streams, but instead exhibit a cyclical morphologic evolution, oscillating between laterally stable and laterally unstable end‐members with a frequency determined by the forest fire recurrence interval. Copyright © 2008 John Wiley & Sons, Ltd.     

The multivariate controls of hydraulic geometry: A causal investigation in terms of boundary shear distribution

Most downstream hydraulic geometry exponents have been found to be very close to the classic values reported by Leopold and Maddock (1953). These have been viewed as the simplified cases to general trends because the hydraulic geometry of alluvial channels is actually the product of ‘multivariate controls’ (Richards, 1982). This paper is an attempt to develop a soundly based foundation for the explanation of the physical mechanisms of these controls. A quantitative relationship between channel shape and boundary shear distribution developed from experimental flume results is found to be applicable in some instances to alluvial channels, particularly to stable canals. On the basis of this relationship, it is shown that downstream hydraulic geometry is determined not only by flow discharge, but also by channel slope, channel average roughness and sediment composition of the channel boundary. This is strongly supported by our analysis of 529 observations from both stable canals and natural rivers in the U.S.A. and the U.K. The difference between regime relations in canals and the hydraulic geometry of rivers appears to be caused mainly by channel slope and average roughness, which can be regarded as constants only in stable canals. The close relationship between discharge and channel average roughness observed in canals is not repeated in natural channels, partly because of the variety of flow values used to define the channel-forming discharge. Furthermore, it is indicated that the effects of the sediment composition of the channel boundary on hydraulic geometry are significant and need further investigation.     

The concept of dominant discharge applied to two gravel-bed streams in relation to channel stability thresholds

Dominant discharge may be defined as that discharge which transports most bed sediment in a stream that is close to steady-state conditions. The concept is examined in relation to two single thread gravel-bedded streams. One stream is alluvial and free to adjust its geometry whilst in the other, channel capacity and form are partially constrained by cohesive till-banks and a heavily compacted bed. The total quantity of bedload and its calibre were measured for every flood over a six year period, so that the relationship between the grain-size of bedload and the most effective discharge could be examined in the context of thresholds for channel change. The dominant discharge concept was applicable to the alluvial stream in that the bankfull value is an effective discharge for maintaining channel capacity. The concept applied less well to the ‘non-alluvial’ stream. Although in both streams the bankfull value was exceeded for less than 0.34 per cent of the time, overbank flows are important in instigating channel change. It is only during overbank flows that the largest bed material is entrained in quantity. For within-channel flows a threshold separates flows which winnow fine matrix from those which entrain the finer bed gravels. This threshold occurred at 60 per cent bankfull. It was concluded that the dominant discharge concept can be applied to streams close to steady-state which are alluvial, competent, and free to adjust their boundaries. An important proviso is that two channel-stability domains can be recognized. These domains represent channel maintenance and channel adjustment and are defined by intrinsic thresholds in the bed material entrainment function.     

Comparison of hydraulic geometry between sand‐ and gravel‐bed rivers in relation to channel pattern discrimination

A comparison has been made between the hydraulic geometry of sand‐ and gravel‐bed rivers, based on data from alluvial rivers around the world. The results indicate a signi?cant difference in hydraulic geometry among sand‐ and gravel‐bed rivers with different channel patterns. On this basis, some diagrams for discrimination of meandering and braided channel patterns have been established. The relationships between channel width and water discharge, between channel depth and water discharge, between width–depth ratio and water discharge and between channel slope and water discharge can all be used for channel pattern discrimination. The relationship between channel width and channel depth can also be used for channel pattern discrimination. However, the accuracy of these relationships for channel pattern discrimination varies, and the depth–discharge relationship is a better discriminator of pattern type than the classic slope–discharge function. The cause for this difference has been explained qualitatively. To predict the development of channel patterns under different natural conditions, the pattern discriminator should be searched on the basis of independent or at least semi‐independent variables. The relationship between stream power and bed material grain size can be used to discriminate channel patterns, which shows a better result than the discriminator using the slope–discharge relationship. Copyright © 2004 John Wiley & Sons, Ltd.     

A stability criterion inherent in laws governing alluvial channel flow

The stability criterion of maximum flow efficiency (MFE) has previously been found inherent in typical alluvial channel flow relationships, and this study investigates the general nature of this criterion using a wider range of flow resistance and bedload transport formulae. For straight alluvial channels, in which the effect of sediment sorting is insignificant, our detailed mathematical analysis demonstrates that a flow efficiency factor ε occurs generally as the ratio of sediment (bedload) discharge Q_s to stream power Ω (γQS) in the form of . When ε is maximized (i.e. Q_s is maximized or Ω is minimized), maximally efficient straight channel geometries derived from most flow resistance and bedload transport formulae are found compatible with observed bankfull hydraulic geometry relations. This study provides support for the use of the criteria of MFE, maximum sediment transporting capacity and minimum stream power for understanding the operation of alluvial rivers, and also addresses limitations to the direct application of its findings. Copyright © 2002 John Wiley & Sons, Ltd.     

Stream geomorphology in a mountain lake district: hydraulic geometry,sediment sources and sinks,and downstream lake effects

Lakes are common in glaciated mountain regions and geomorphic principles suggest that lake modifications to water and sediment fluxes should affect downstream channels. Lakes in the Sawtooth Mountains, Idaho, USA, were created during glaciation and we sought to understand how and to what extent glacial morphology and lake disruption of fluxes control stream physical form and functions. First, we described downstream patterns in channel form including analyses of sediment entrainment and hydraulic geometry in one catchment with a lake. To expand on these observations and understand the role of glacial legacy, we collected data from 33 stream reaches throughout the region to compare channel form and functions among catchments with lakes, meadows (filled lakes), and no past or present lakes. Downstream hydraulic geometry relationships were weak for both the single catchment and regionally. Our data show that downstream patterns in sediment size, channel shape, sediment entrainment and channel hydraulic adjustment are explained by locations of sediment sources (hillslopes and tributaries) and sediment sinks (lakes). Stream reaches throughout the region are best differentiated by landscape position relative to lakes and meadows according to channel shape and sediment size, where outlets are wide and shallow with coarse sediment, and inlets are narrow and deep with finer sediment. Meadow outlets and lake outlets show similarities in the coarse‐sediment fraction and channel capacity, but meadow outlets have a smaller fine‐sediment fraction and nearly mobile sediment. Estimates of downstream recovery from lake effects on streams suggest 50 per cent recovery within 2–4 km downstream, but full recovery may not be reached within 20 km downstream. These results suggest that sediment sinks, such as lakes, in addition to sources, such as tributaries, are important local controls on mountain drainage networks. Copyright © 2006 John Wiley & Sons, Ltd.     

The influence of lithology on channel geometry and bed sediment organization in mountainous hillslope-coupled streams

Sediment transport and channel morphology in mountainous hillslope-coupled streams reflect a mixture of hillslope and channel processes. However, the influence of lithology on channel form and adjustment and sediment transport remains poorly understood. Patterns of channel form, grain size, and transport capacity were investigated in two gravel-bed streams with contrasting lithology (basalt and sandstone) in the Oregon Coast Range, USA, in a region in which widespread landslides and debris flows occurred in 1996. This information was used to evaluate threshold channel conditions and channel bed adjustment since 1996. Channel geometry, slope, and valley width were measured or extracted from LiDAR and sediment textures were measured in the surface and subsurface. Similar coarsening patterns in the first few kilometres of both streams indicated strong hillslope influences, but subsequent downstream fining was lithology-dependent. Despite these differences, surface grain size was strongly related to shear stress, such that the ratio of available to critical shear stress for motion of the median surface grain size at bankfull stage was around one over most of the surveyed lengths. This indicated hydraulic sorting of supplied sediment, independent of lithology. We infer a cycle of adjustment to sediment delivered during the 1996 flooding, from threshold conditions, to non-alluvial characteristics, to threshold conditions in both basins. The sandstone basin can also experience complete depletion of the gravel-size alluvium to sand size, leading to bedrock exposure because of high diminution rates. Although debris flows being more frequent in a basalt basin, this system will likely display threshold-like characteristics over a longer period, indicating that the lithologic control on channel adjustment is driven by differences in rock competence that control grain size and available gravel for bed load transport. © 2020 John Wiley & Sons, Ltd.     

Relation between flow,surface‐layer armoring and sediment transport in gravel‐bed rivers

This study investigates trends in bed surface and substrate grain sizes in relation to reach‐scale hydraulics using data from more than 100 gravel‐bed stream reaches in Colorado and Utah. Collocated measurements of surface and substrate sediment, bankfull channel geometry and channel slope are used to examine relations between reach‐average shear stress and bed sediment grain size. Slopes at the study sites range from 0·0003 to 0·07; bankfull depths range from 0·2 to 5 m and bankfull widths range from 2 to 200 m. The data show that there is much less variation in the median grain size of the substrate, D_50s, than there is in the median grain size of the surface, D₅₀; the ratio of D₅₀ to D_50s thus decreases from about four in headwater reaches with high shear stress to less than two in downstream reaches with low shear stress. Similar trends are observed in an independent data set obtained from measurements in gravel‐bed streams in Idaho. A conceptual quantitative model is developed on the basis of these observations to track differences in bed load transport through an idealized stream system. The results of the transport model suggest that downstream trends in total bed load flux may vary appreciably, depending on the assumed relation between surface and substrate grain sizes. Copyright © 2007 John Wiley & Sons, Ltd.     

Longitudinal distributions of river flood power: the combined automated flood,elevation and stream power (CAFES) methodology

Stream power can be an extremely useful index of fluvial sediment transport, channel pattern, river channel erosion and riparian habitat development. However, most previous studies of downstream changes in stream power have relied on field measurements at selected cross‐sections, which are time consuming, and typically based on limited data, which cannot fully represent important spatial variations in stream power. We present here, therefore, a novel methodology we call CAFES (combined automated flood, elevation and stream power), to quantify downstream change in river flood power, based on integrating in a GIS framework Flood Estimation Handbook systems with the 5 m grid NEXTMap Britain digital elevation model derived from IFSAR (interferometric synthetic aperture radar). This provides a useful modelling platform to quantify at unprecedented resolution longitudinal distributions of flood discharge, elevation, floodplain slope and flood power at reach and basin scales. Values can be resolved to a 50 m grid. CAFES approaches have distinct advantages over current methodologies for reach‐ and basin‐scale stream power assessments and therefore for the interpretation and prediction of fluvial processes. The methodology has significant international applicability for understanding basin‐scale hydraulics, sediment transport, erosion and sedimentation processes and river basin management. Copyright © 2008 John Wiley & Sons, Ltd.     

The impact of afforestation on stream bank erosion and channel form

Modification of the land use of a small catchment through coniferous afforestation is shown to have influenced stream bank erosion and channel form. Field mapping and erosion pin measurements over a 19-month period provides evidence of more active bank erosion along forested channel reaches than along non-forested. Extrapolation of downstream increases in bankfull width, bankfull depth, and channel capacity with increasing basin area for the non-forested catchment has demonstrated that afforestation of the lower part of the catchment has had a marked effect on channel form. Channel widths within the forest are up to three times greater than that predicted from the regression. These changes in bankfull width have led to stream bed aggradation and the development of wide shallow channels within the forest, and channel capacities within the forest are over two times that predicted from the basin area. The relationship between channel sinuosity and valley gradient for non-forested reaches of the river also indicated decreased sinuosity resulting from afforestation. These changes in channel form result from active bank erosion within the forest with coarse material being deposited within the channel as point-bars and mid-channel bars. Active bank erosion is largely attributed to the suppression by the forest of a thick grass turf and its associated dense network of fine roots, and secondly to the river attempting to bypass log jams and debris dams in the stream channel.     

Inbank and overbank velocity conditions in an arid zone anastomosing river

Relative to those at sub‐bankfull flow, hydraulic conditions at overbank flow, whether in the channel or on the floodplain, are poorly understood. Here, velocity conditions are analysed over an unusually wide range of flows in the arid zone river of Cooper Creek with its complex system of anastomosing channels and large fluctuations in floodplain width. At‐a‐station hydraulic geometry relationships reveal sharp discontinuities in velocity at the inbank–overbank transition, the nature of the discontinuity varying with the degree of flow confinement and the level of channel–floodplain interaction. However, despite inter‐sectional differences, velocities remain modest throughout the flow range in this low‐gradient river, and the large increases in at‐a‐station discharge are principally accommodated by changes in cross‐sectional area. Velocity distribution plots suggest that within‐channel conditions during overbank flow are characterized by a central band of high velocity which penetrates far toward the bed, helping to maintain already deep cross‐sections. Floodplain resistance along Cooper Creek is concentrated at channel bank tops where vegetation density is highest, and the subsequent flow retardation is transmitted across the surface of the channels over distances as large as 50–70 m. The rough floodplain surface affects flood wave transmission, producing significant decreases in wave speeds downstream. The character of the wave‐speed–discharge relationship also changes longitudinally, from log–linear in the upper reaches to nonlinear where the floodplain broadens appreciably. The nonlinear form is similar in several respects to relationships proposed for more humid rivers, with flood wave speed reaching an intermediate maximum at about four‐fifths bankfull discharge before decreasing to a minimum at approximately Q_2·33. It does not regain the value at the intermediate maximum until the 10 year flood, by which time floodplain depths have become relatively large and broad floodways more active. Copyright © 2002 John Wiley & Sons, Ltd.     

Influence of lithologic erodibility on alluvial fan area,western white mountains,California and Nevada

Differences in lithologic erodibility and sediment storage within a drainage basin affect the relationship between alluvial fan area and drainage basin area along the western White Mountains. Large fans are produced by basins underlain by resistant rocks, which have steep and narrow trunk stream canyons with little sediment in storage. Small fans are produced by basins composed of erodible lithologic units, which have wider valley floors, lower valley-side slopes, and considerably more sediment stored along trunk stream canyons than is the case in basins underlain by resistant rocks.