环境和生物样品中痕量双酚A的分析方法

作为环境类内分泌干扰物之一,双酚A由于被广泛作为化工原料使用而对环境和人类健康产生了严重的危害。文章对近年来国内外环境及生物样品中残留双酚A的最新前处理及检测技术的研究进展进行了综述。除常规前处理技术外,还介绍了包括搅拌棒吸附萃取及分子印迹等新型分离、富集技术在双酚A提取中的应用;另外,在着重介绍双酚A的色谱-质谱分析技术的基础上,对免疫分析、传感器检测和光学检测在双酚A检测中的应用也进行了详细报道。展望双酚A分析的发展趋势,二级串联质谱由于具有比其他分析方法更低的检出限,因此将会成为检测环境及生物样品中痕量双酚A的最具潜力的手段之一;研制价格低廉、重现性好、高通量的微型化、便携式、自动化仪器将是在线快速分析双酚A的另一个主要发展方向。     

维持ICAP仪器测试条件长期稳定性的研究

本文介绍维持ICAP仪器工作条件长期稳定的实验方法。讨论了仪器的定期检测与调试,合理选择仪器控制标样,以及例行生产中的标准样品分析与对检样品分析。以上方法经多年化探拼图工作检验证明行之有效。     

冷原子荧光法测定水中痕量汞的一些经验──WGY-SIA型数字荧光测汞仪的应用

介绍了应用数字荧光测汞仪进行水中痕量汞测定的一点经验和体会,以及仪器使用和样品处理应注意的有关事项和操作技术。     

地球化学样品无污染加工流程

随着科研工作者对实验数据的精度和准确度的要求越来越高,为获得可靠的地球化学样品分析数据,除将分析测试仪器条件优化外,对样品前期加工流程也给予了高度重视.笔者在大量实验的基础上,总结经验,对原有制样方法进行了改进,能够加工出小于200目无污染的粉末样品,可以满足高精度、高灵敏度及高自动化程度的测试仪器对样品的要求.     

荧光光谱法分析油气化探样品中的芳烃

荧光光谱法避免了色谱法所需的大量分离工作,具有灵敏度高、检测限低、分析速度快等特点,非常适用于油气化探样品分析。本文对常规荧光光谱分析的样品前处理方法和仪器测定参数进行优化,建立了适用于测定油气化探样品中芳烃的荧光光谱分析方法。实验采用农残级正己烷作为溶剂,简化了溶剂提纯操作,采用振荡器间歇振荡方式有效地提高了芳烃的提取效果。在优化的仪器条件下对油气化探样品中的芳烃进行检测,选择萘、菲、艹屈三种标准物质,采用单点外标法对样品激发波长265 nm,发射波长为320 nm、360 nm、405 nm的三个特征光谱峰进行定量分析,测定结果采用量化后的浓度值代替常用的荧光强度值,使不同实验室、不同型号仪器间的荧光指标具有统一的定量标准,提高了数据的可比性。本方法检测限为1.8ng/g(以萘计算),优于行业标准(SY/T 6009.8—2003)规定的检出限≤2 ng/g要求,方法精密度(RSD,n=12)为4.5%(320 nm)、9.6%(360 nm)、14.7%(405 nm)。通过质量控制与质量管理体系的完善,本方法已经在大庆地区油气化探工作中得到实际应用,荧光指标对样品采样深度确定及异常点发现具有良好的指示作用。     

植物样品中无机元素分析的样品前处理方法和测定技术

植物样品中无机元素的分析测定在环境地球化学和生物地球化学的研究中起着重要作用。植物样品中元素含量一般较低,须选用科学合理的前处理技术和灵敏度高、精密度好、检出限低的测定方法。本文针对植物样品前处理方法和无机元素分析测定技术的研究进展、优势与不足进行评述。前处理方法主要根据样品和待测元素的性质进行选择:干法灰化所用试剂少、空白值低,但组织致密型的样品不易灰化完全、高温下易造成元素挥发损失;湿法消解样品消解较为完全,但试剂消耗大、空白值高、操作繁琐;微波消解可以防止部分易挥发元素损失,用酸量少、消解速度快,但称样量相对较小,不适于需要大称样量的样品分析。几乎所有针对元素分析的仪器分析技术都可以用于植物样品分析,主要根据仪器适用的元素、必要的干扰校正以及基体改进等方面进行选择:电感耦合等离子体质谱法可同时测定植物样品中40种以上的元素,高分辨质谱的检出限可达fg/mL;电感耦合等离子体发射光谱法适用于某些植物样品中含量较高的P、K、Na等元素的测定;原子吸收光谱法可分析元素达70余种,是普及程度最高的仪器分析技术之一;原子荧光光谱法与氢化物发生技术的联用,在元素含量较低的植物样品分析中技术优势更加明显;新兴的激光诱导击穿光谱技术已被应用于植物样品分析,无需复杂的样品前处理,操作简单快速,可实现原位、在线、实时、多元素同时检测;其他选择性强、灵敏度高的分析技术,满足了一些特定元素不能用常规分析技术测定的需求。当前主流分析技术的样品前处理方法都存在着缺陷,固体进样技术将成为植物样品分析领域的发展方向之一。     

D293）固相萃取分离/ICP-AES在线测定环境样品中铀

采用微色谱柱技术对环境样品中的铀进行分离富集,分析了影响其分离富集的条件,并以ICP-AES为检测仪器,对环境样品中铀的含量进行了准确测定,建立了D293固相萃取分离/ICP-AES在线测定环境样品中铀的方法。实验表明,pH=1.5时,铀可被树脂完全吸附,10mL0.9mol/LNH4NO3-0.1mol/LHNO3可完全解吸铀,浓缩物用ICP-AES进行测定,检出限、相对标准偏差和相对误差分别为0.05μg/mL,0.8%～2.9%和0.4%～9.8%。方法简便、快速、准确,适合于各种环境样品中微量铀的测定。     

新型常压热解离化学电离装置的研制及应用

为了克服常压热解离化学电离装置(TDCI)热源控制不稳定、背景干扰较大、实验重现性相对较差等问题。文章在前期研究的基础上,分别对仪器各组成部件进行优化和改进,研制出能够根据待测物的热稳定性、极性、挥发性、熔点等性质,能够对仪器的温度、加热时间、加速电压等仪器参数连续、精确可调的新型常压热解电离源实验装置,并进行了优化和表征。与原研制的TDCI实验装置相比,新型TDCI电离装置的高压调节和温度控制的连续性和精确度以及热源的稳定性得到了极大的提高。高压调节的最小刻度从原来的1 V减小到0.1 V,温度控制系统的调控精确由原来的±5℃减小到±1℃。采用新型TDCI-MS技术,在常压和无需样品预处理的条件下,实现了实际样品可乐中痕量兴奋剂可卡因和牛奶中弱极性物质三聚氰胺的快速检测,单个样品检测时间都小于30 s,检出限低,可卡因和三聚氰胺的最低检出限分别为1.12×10^-12 g/mL和2.62×10^-11 g/mL,重现性好,相对标准偏差(RSD)为4.61%~9.80%,优于原TDCI电离装置的检测结果,完全满足实际样品的检测需要。由于其具有独立稳定的加热装置,与表面解吸常压电离源相比,本仪器装置更适于难挥发性化合物的快速分析。     

电感耦合等离子体质谱直接测定冰芯样品中痕量铅

利用电感耦合等离子体质谱仪对冰芯样品中超痕量Pb进行了直接测定。确定了测定溶液中浓度为ng/L级Pb的最佳仪器参数，载气流速、进样速度等与灵敏度之间的关系,浓度和扫描参数对分析精度的影响。仪器对Pb的质量浓度在20～100ng/L的分析精度(RSD，n=3)＜10%,标准加入回收率在85%～115%，检测下限为0.62ng/L，并给出了采自可可西里马兰冰川M3冰芯中Pb的分析结果。     

ICP-MS测定地质样品中37个元素的准确度和长期稳定性分析

对Elan6100DRC型ICP-MS近五年来所测得的国际地质标样BHVO-1(玄武岩)和AGV-1(安山岩)中的37个元素的测定值以及仪器灵敏度的长期漂移情况进行了统计分析(共计146次)。结果表明,几年来ICP-MS所测数据的长期稳定性和准确度都较好,除个别元素Li(BHVO-1)、Be(BHVO-1))、Cr(AGV-1)、Cs(BHVO-1)和Pb(BHVO-1)的相对误差(与参考值比较)接近或略大于10%外,绝大多数元素的相对误差和相对标准偏差(RSD,测定值之间,n=146)都在5%以内;仪器灵敏度并不是随着时间一直往下漂,有的是往上漂的,也有上下漂的,即使是在同一时间内,有的元素灵敏度往上漂,而有的往下漂。常用的内标法无法较好校正这种漂移,而需要采用内外标相结合的校正方法。不同批次,210个各种地质样品中Rb、Sr、Zr和Nb的XRF和ICP-MS分析结果对比情况表明,绝大多数样品中Rb、Sr、Zr和Nb的ICP-MS和XRF的测定值的相对误差小于10%。以上的分析结果表明,我们实验室所建立的以密闭高温高压消解技术为样品前处理方法,以模拟地壳样品中元素天然丰度比的基体匹配校正标准溶液为外标和以Rh为内标结合外标校正的ICP-MS多元素分析方法具有非常好的准确度和长期稳定性。     

Wavelength-dispersive X-ray fluorescence spectrometric determination of Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites

Komatiites are mantle-derived ultramafic volcanic rocks. Komatiites have been discovered in several States of India, notably in Karnataka. Studies on the distribution of trace-elements in the komatiites of India are very few. This paper proposes a simple, accurate, precise, rapid, and non-destructive wavelength-dispersive x-ray fluorescence (WDXRF) spectrometric technique for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in komatiites, and discusses the accuracy, precision, limits of detection, x-ray spectral-line interferences, inter-element effects, speed, advantages, and limitations of the technique. The accuracy of the technique is excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Zr, Nb, Ba, Pb, and Th and very good (within 4%) for Y. The precision is also excellent (within 3%) for Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th. The limits of detection are: 1 ppm for Sc and V; 2 ppm for Cr, Co, and Ni; 3 ppm for Cu, Zn, Rb, and Sr; 4 ppm for Y and Zr; 6 ppm for Nb; 10 ppm for Ba; 13 ppm for Pb; and 14 ppm for Th. The time taken for determining Sc, V, Cr, Co, Ni, Cu, Zn, Rb, Sr, Y, Zr, Nb, Ba, Pb, and Th in a batch of 24 samples of komatiites, for a replication of four analyses per sample, by one operator, using a manual WDXRF spectrometer, is only 60 hours.     

高压微波消解法测定醋酸纤维过滤器采集的微尘粒子中的砷镉钴铬铜铁锰镍铅钒锌

最新的流行病学研究表明,空气中较高浓度的悬浮细颗粒可能对人类的健康有不利的影响。根据该项研究显示,由于心脏病、慢性呼吸问题和肺功能指标恶化而导致死亡率的升高与细尘粒子有关。这些研究结果已经促使欧盟于1999年4月出台了限制空气中二氧化硫、二氧化氮、氧化氮、铅和颗粒物含量的法案(1999/30/EC),对各项指标包括对可吸入PM10颗粒的浓度提出了新的限制性指标。PM10颗粒是指可以通过预分级器分离采集的气体动力学直径小于10μm的细颗粒。目前研究的兴趣重点逐步偏向PM2.5这些更细微颗粒物,PM2.5这种颗粒物对健康有明显的不利影响。在欧盟指令2008/50/EC中,对PM10和PM2.5都提     

Isotopic systematics of He,Ar, S,Cu, Ni,Re, Os,Pb, U,Sm, Nd,Rb, Sr,Lu, and Hf in the rocks and ores of the Norilsk deposits

This paper reports the first results of a study of 11 isotope systems (³He/⁴He, ⁴⁰Ar/³⁶Ar, ³⁴S/³²S, ⁶⁵Cu/⁶³Cu, ⁶²Ni/⁶⁰Ni, ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ^206–208Pb/²⁰⁴Pb, Hf–Nd, U–Pb, and Re–Os) in the rocks and ores of the Cu–Ni–PGE deposits of the Norilsk ore district. Almost all the results were obtained at the Center of Isotopic Research of the Karpinskii All-Russia Research Institute of Geology. The use of a number of independent genetic isotopic signatures and comprehensive isotopic knowledge provided a methodic basis for the interpretation of approximately 5000 isotopic analyses of various elements. The presence of materials from two sources, crust and mantle, was detected in the composition of the rocks and ores. The contribution of the crustal source is especially significant in the paleofluids (gas–liquid microinclusions) of the ore-forming medium. Crustal solutions were probably a transport medium during ore formation. Air argon is dominant in the ores, which indicates a connection between the paleofluids and the atmosphere. This suggests intense groundwater circulation during the crystallization of ore minerals. The age of the rocks and ores of the Norilsk deposits was determined. The stage of orebody formation is restricted to a narrow age interval of 250 ± 10 Ma. An isotopic criterion was proposed for the ore-bearing potential of mafic intrusions in the Norilsk–Taimyr region. It includes several interrelated isotopic ratios of various elements: He, Ar, S, and others.     

硅酸盐中铁、锰、钛、钙、钾、磷、硅、铝、镁、钠、锶、铷、钡的X-射线荧光光谱定量测定

本文介绍样品经四硼酸锂熔融制成玻璃小饼。采用Lachance模式和理论a系数来校正元素间的效应,由3080E型X-射线荧光谱仪和DF-350B数据处理系统完成硅酸盐中十三个项目的测定。     

硅酸盐类样品中硅、铁、铝、钛、锰、钙、镁、钾、钠和磷的x射线荧光光谱测定

本文拟定了一种以熔融法制备样片,用X射线荧光光谱测定硅酸盐类样品中Si、Fe、Al、Tj、Mn、Ca、Mg、K、Na、P等元素的分析方法。在对不同靶材X光管和分光晶体实验对比的基础上,选择了最佳的测量条件。该法具有快速、准确,测量范围广,检测限低,价格便宜等优点。经过近百个各种类型标样或管理样品的分析对比表明,本法不仅适用于硅酸盐类岩石样品的分析,还适用于铁矿、铝土矿、碳酸盐类岩矿样品以及水泥、耐火材料等样品的分析。     

Viscous, cohesive, non-Newtonian, depositing, radial slurry flow

Mining induced subsidence can significantly affect mining costs where major surface facilities and natural environment need to be protected. Overburden grout injection is a technology used to control coal mine subsidence by injecting the mine waste material extracted from the coal back into the inter-burden rock during longwall mining. The flowing slurry is here categorised as a nonlinear viscous cohesive (Bingham plastic) fluid. During longwall mining the grout slurry is pumped into the separated beds of the rock mass through a central vertical borehole, which is drilled deep into the inter-burden rock strata above the coal seam. However, a blockage can occur in the injection system when the slurry velocity falls below a certain critical threshold velocity, indicating a material phase change from cohesive-viscous to cohesive-frictional. In situ field injection tests through boreholes have been simulated at a smaller scale at the CSIRO laboratory in Brisbane by pumping the slurry through a radial disk (gap = 4 mm) from its centre. Laboratory experiments indicate a general, nonlinear, cohesive, viscous, frictional model for shear behaviour of the slurry, in which the material shear parameters are functions of the disk radial distance. Complete dimensional and dimensionless analytical solutions have been developed based on an approach related to Bingham–Herschel–Bulkley fluid mechanics. The derived formulae include relations for minimum pump pressure, local pressure and pressure gradient, wall shear stress, volume rate, velocity and velocity gradient. The theoretical results match the experimental measurements. The experiments covered slurries with maximum particle sizes of 0.5 to 2 mm with about 50% being larger than 100 µm. The viscosities at the various solids concentrations were measured with a standard torsion viscometer. This study differs from the previous research in several distinct aspects, namely, consideration of the variable shear parameters rather than fixed values, inclusion of total nonlinear behaviour, and implementation of a friction function to mimic behaviour of the deposited and consolidating stiff slurry, which can cause a significant pressure rise as a result of the increased shear resistance.     

Mountains,nations, parks,and conservation

Between 1985 and 1991, two new mountain protected areas (MTNPA) covering more than 35,000 km² and based on participatory management models — the Makalu-Barun National Park and Conservation Area, Nepal, and Qomolangma Nature Preserve, Tibet Autonomous Region — were successfully established through the collaborative efforts of Woodlands Mountain Institute and conservationists in China and Nepal. Characteristics common to both projects include the importance of establishing (1) effective rationales, (2) local support constituencies, (3) a senior advisory group, (4) a task force, (5) linkages between conservation and development, and (6) fund raising mechanisms. The lessons derived from the experiences of Woodlands Mountain Institute are of significant value to others in preserving MTNPA. Increased collaboration and communication between all interested in conservation, however, will remain a critical component for expanding mountain protected area coverage to throughout the world.     

Regional distribution of Al,B, Ba,Ca, K,La, Mg,Mn, Na,P, Rb,Si, Sr,Th, U and Y in terrestrial moss within a 188,000 km2 area of the central Barents region: influence of geology,seaspray and human activity

Five hundred and ninety-eight samples of terrestrial moss (Hylocomium splendens and Pleurozium schreberi) collected from a 188,000 km² area of the central Barents region (NE Norway, N Finland, NW Russia) were analysed by ICP-AES and ICP-MS. Analytical results for Al, B, Ba, Ca, K, La, Mg, Mn, Na, P, Rb, Si, Sr, Th, U and Y concentrations are reported here. Graphical methods of data analysis, such as geochemical maps, cumulative frequency diagrams, boxplots and scatterplots, are used to interpret the origin of the patterns for these elements. None of the elements reported here are emitted in significant amounts from the smelting industry on the Kola Peninsula. Despite the conventional view that moss chemistry reflects atmospheric element input, the nature of the underlying mineral substrate (regolith or bedrock) is found to have a considerable influence on moss composition for several elements. This influence of the chemistry of the mineral substrate can take place in a variety of ways. (1) It can be completely natural, reflecting the ability of higher plants to take up elements from deep soil horizons and shed them with litterfall onto the surface. (2) It can result from naturally increased soil dust input where vegetation is scarce due to harsh climatic conditions for instance. Alternatively, substrate influence can be enhanced by human activity, such as open-cast mining, creation of ‘technogenic deserts’, or handling, transport and storage of ore and ore products, all of which magnify the natural elemental flux from bedrock to ground vegetation. Seaspray is another natural process affecting moss composition in the area (Mg, Na), and this is most visible in the Norwegian part of the study area. Presence or absence of some plant species, e.g., lichens, seems to influence moss chemistry. This is shown by the low concentrations of B or K in moss on the Finnish and Norwegian side of the (fenced) border with Russia, contrasting with high concentrations on the other side (intensive reindeer husbandry west of the border has selectively depleted the lichen population).     

NEW SET OF LOW CONCENTRATION STANDARDS FOR LA, CE, SM, YB, LU, Y, SC, V, NB AND TA IN SILICATES

We have developed a set of four synthetic standards for the rare earth and high field strength elements designed for use in the determination of those elements in silicates. The base material is a glass nominally at the eutectic of the MgO-Al₂O₃-SiO₂ ternary system. The nominal doping level was 2 wt% of the elements as oxides. To avoid problems associated with peak interference, the elements were doped in four separate glasses.