Sedimentary evolution of the Late Eocene Vernet lacustrine system (South-Central Pyrenees). Tectono-climatic control in an alluvial-lacustrine piggyback basin

A complete third-order tectono-sedimentary cycle filled the Vernet lacustrine piggyback basin during the late Eocene. The depositional sequence can be subdivided into five units or systems tracts with distinct architectural frameworks, which developed a progressive unconformity. Sedimentary infilling of the piggyback basin began with retrogradational alluvial fans and fluvio-alluvial deposits being deposited, arranged in two thinning- and fining-upward cycles during the uplifting and emplacement of the southernmost Pyrenean thrusts, and with three thickening- and coarsening-upward progradational floodplain and lacustrine cycles, during the quiescence of the southernmost thrusts, at the same time as the emplacement of several northernmost thrusts of the southern Pyrenees. The facies associations identified represent different depositional environments in a sheetflow-dominated system, including playa-lake deposits, floodplain deposits, sheetflow fluvial deposits and sheet deltas in ephemeral to shallow lacustrine settings. Fourth and fifth order arid/semi-arid climatic cycles can be recognized, driven either by orbital obliquity and precessional forcing (Milankovitch cyclicity), insolation cycles or possibly subprecessional autogenic mechanisms related to the emplacement of northern thrusts and the consequent changes in the drainage basin. Arid periods are recorded by sheetflood fluvial, ephemeral lacustrine or terminal splay deposits, with abundant medium-to-coarse-grained sandstone packages in red-to-grey mudstones, a product of unconfined or low-confined sheetflows or hyperconcentrated flows, with bedload and suspended load, during flood episodes, at times of lake lowstand. Semi-arid periods are recorded as relative highstand lacustrine deposits, including grey-to-white mudstones deposited in prodelta environments and fine-grained sheet sandstone units sedimented in a delta front (with minor channels and extensive sheet lobes) and prodelta environments in shallow lakes, from sheetflood events.     

A three‐dimensional stratigraphic model for the Messinian crisis in the Pannonian Basin,eastern Hungary

A three‐dimensional quantitative stratigraphic forward model is employed to investigate the controls leading to the Messinian events in the lacustrine Pannonian Basin of Central Paratethys, and the link between the Messinian salinity crisis in the Mediterranean and the late Miocene‐Pliocene stratigraphy of the Pannonian Basin. Subsurface geological data show that a prominent unconformity surface formed during Messinian time in the Pannonian Basin associated with a sudden forced regression, abrupt basinward shift of facies and a subsequent, prolonged lowstand normal regression. The lowstand prograding series filled up the shallow basin fast, while, at the same time, the marginal areas of the basin were subject to tectonic inversion. The Dionisos program used in this research is built on a nonlinear water‐driven sediment diffusion process, and it employs multiple sediment classes, basin flexure and compaction. Four different scenarios were built in the experiments to test possible basin histories with different rates and timing of tectonic inversion. Each scenario was modelled in two versions: including and not including a lake‐level fall in the Messinian. The results confirm that the Pannonian Basin in the study area has undergone a tectonic inversion since the Messinian, although the exact rates of uplift at different locations remain uncertain. The unconformity and the observed stratigraphic architecture and facies pattern could be modelled adequately only in the versions that applied a Messinian lake‐level fall. Our research concludes that the Messinian unconformity in the Pannonian Basin was caused by an absolute lake‐level drop, likely linked to the desiccation of the Mediterranean, followed by subsidence and normal regression in the basin centre and concomitant tectonic inversion and uplift along the basin margins.     

临夏盆地三千万年来沉积物粒度特征及其构造意义*

本文通过对临夏盆地长达30m.y.的连续沉积(临夏群)共计779个样品的粒度特征分析,划分出七大完整的沉积旋回。粒度曲线明显地表示出青藏高原的强烈隆升始于距今3.4Ma前。该文还初步确定出青藏高原地区两次夷平过程最终结束的年代。     

Post glacial lacustrine event sedimentation in an ancient mountain setting: Carboniferous Lake Malanzán (Western Argentina)

Lacustrine deposits of the Malanzán Formation record sedimentation in a small and narrow mountain paleovalley. Lake Malanzán was one of several water bodies formed in the Paganzo Basin during the Late Carboniferous deglaciation. Five sedimentary facies have been recognized. Facies A (Dropstones-bearing laminated mudstones) records deposition from suspension fall-out and probably underflow currents coupled with ice-rafting processes in a basin lake setting. Facies B (Ripple cross-laminated sandstones and siltstones) was deposited from low density turbidity currents in a lobe fringe environment. Facies C (Massive or graded sandstones) is thought to represent sedimentation from high and low density turbidity currents in sand lobes. Facies D (Folded sandstones and siltstones) was formed from slumping in proximal lobe environments. Facies E (Wave-rippled sandstones) records wave reworking of sands supplied by turbidity currents above wave base level.The Lake Malanzán succession is formed by stacked turbidite sand lobe deposits. These lobes were probably formed in proximal lacustrine settings, most likely relatively high gradient slopes. Paleocurrents indicate a dominant direction from cratonic areas to the WSW. Although the overall sequence shows a regressive trend from basin fine-grained deposits to deltaic and braided fluvial facies, individual lobe packages lack of definite vertical trends in bed thickness and grain size. This fact suggests aggradation from multiple-point sources, rather than progradation from single-point sources. Sedimentologic and paleoecologic evidence indicate high depositional rate and sediment supply. Deposition within the lake was largely dominated by event sedimentation. Low diversity trace fossil assemblages of opportunistic invertebrates indicate recolonization of event beds under stressed conditions.Three stages of lake evolutionary history have been distinguished. The vertical replacement of braided fluvial deposits by basinal facies indicates high subsidence and a lacustrine transgressive episode. This flooding event was probably linked to a notable base level rise during postglacial times. The second evolutionary stage was typified by the formation of sand turbidite lobes from downslope mass-movements. Lake history culminates with the progradation of deltaic and braided fluvial systems     

Upper Triassic – Jurassic sequence stratigraphy and its structural controls in the western Ordos Basin, China

Upper Triassic, Lower–Middle Jurassic and Upper Jurassic strata in the western Ordos Basin of North China are interpreted as three unconformity-bounded basin phases, BP-4, BP-5 and BP-6, respectively. The three basin phases were deposited in three kinds of predominantly continental basin: (1) a Late Triassic composite basin with a south-western foreland subbasin and a north-western rift subbasin, (2) an Early–Middle Jurassic sag basin and (3) a Late Jurassic foreland molasse wedge. Within the Late Triassic composite basin BP-4 includes three sequences, S4-1, S4-2 and S4-3. In the south-western foreland subbasin, the three sequences are the depositional response to three episodes of thrust load subsidence, and are mainly composed of alluvial fan, steep-sloped lacustrine delta and fluvial systems in front of a thrust fault-bounded basin flank. In the north-western rift subbasin, the three sequences are the depositional response to three episodes of rift subsidence, and consist of alluvial fan – braid plain and fan delta systems basinward of a normal fault-bounded basin margin. In the sag basin BP-5 includes four sequences, S5-1, S5-2, S5-3 and S5-4, which reflect four episodes of intracratonic sagging events and mainly consist of fluvial, gentle-gradient lacustrine delta and lacustrine systems sourced from peripheral uplifted flanks. BP-6, deposited in the foreland-type basin, includes one sequence, S6-1, which is the depositional response to thrust load subsidence and is composed of alluvial fan systems. The formation and development of these three kinds of basins was controlled by Late Triassic and Jurassic multi-episode tectonism of basin-bounding orogenic belts, which were mainly driven by collision of the North China and South China blocks and subduction of the western Pacific plate.     

The stratigraphic and structural evolution of the Dzereg Basin, western Mongolia: clastic sedimentation, transpressional faulting and basin destruction in an intraplate, intracontinental setting

The Dzereg Basin is an actively evolving intracontinental basin in the Altai region of western Mongolia. The basin is sandwiched between two transpressional ranges, which occur at the termination zones of two regional‐scale dextral strike‐slip fault systems. The basin contains distinct Upper Mesozoic and Cenozoic stratigraphic sequences that are separated by an angular unconformity, which represents a regionally correlative peneplanation surface. Mesozoic strata are characterized by northwest and south–southeast‐derived thick clast‐supported conglomerates (Jurassic) overlain by fine‐grained lacustrine and alluvial deposits containing few fluvial channels (Cretaceous). Cenozoic deposits consist of dominantly alluvial fan and fluvial sediments shed from adjacent mountain ranges during the Oligocene–Holocene. The basin is still receiving sediment today, but is actively deforming and closing. Outwardly propagating thrust faults bound the ranges, whereas within the basin, active folding and thrusting occurs within two marginal deforming belts. Consequently, active fan deposition has shifted towards the basin centre with time, and previously deposited sediment has been uplifted, eroded and redeposited, leading to complex facies architecture. The geometry of folds and faults within the basin and the distribution of Mesozoic sediments suggest that the basin formed as a series of extensional half‐grabens in the Jurassic–Cretaceous which have been transpressionally reactivated by normal fault inversion in the Tertiary. Other clastic basins in the region may therefore also be inherited Mesozoic depocentres. The Dzereg Basin is a world class laboratory for studying competing processes of uplift, deformation, erosion, sedimentation and depocentre migration in an actively forming intracontinental transpressional basin.     

Ebro Basin continental sedimentation associated with late compressional Pyrenean tectonics(north‐eastern Iberia): controls on basin margin fans and fluvial systems

ABSTRACT This contribution deals with the External Sierras and a part of the foreland Ebro Basin related to the southern Pyrenean thrust front. The structure of the External Sierras consists of a south‐verging thrust system developed from middle Eocene to early Miocene times. Since the end of the early Oligocene, a regional‐scale detachment anticline (the Santo Domingo anticline) developed, folding the original thrust system and creating new thrust units. The molassic fill in this part of the Ebro Basin (Uncastillo Formation) mainly corresponds to an extensive, composite distributary fluvial system, termed the Luna system, which drained the uplifted Gavarnie Unit to the north. Small, marginal alluvial fans originated along the External Sierras and coalesced in the proximal‐middle portions of the Luna system. Three tecto‐sedimentary units (TSU), late Oligocene to early Miocene in age, comprise the Uncastillo Formation. Lateral relationships and areal distribution of lithofacies through time have been used to establish sedimentary models for the marginal alluvial fans and the Luna fluvial system. Their sedimentary evolution was controlled by tectonics affecting the drainage basins, and based on mapping and stratigraphic relationships of the TSU, the temporal succession of the marginal alluvial fans and their relationships with each thrust system in the south Pyrenean front can be shown. Alluvial fan formation evolved through time from west to east, in accord with the progressive eastward growth of the Santo Domingo anticline as a conical fold. The fluvial network of the Luna system appears to have been mainly radial, but near the basin margin its architecture was influenced by the syndepositional Fuencalderas and Uncastillo anticlines developed within the Ebro Basin. These low‐amplitude folds originated by layer‐parallel shearing caused by rotation of the southern flank of the Santo Domingo anticline. Progressive uplift of these anticlines constrained part of the fluvial discharge to synclinal areas parallel to the basin margin; these areas where characterized by meandering sandy channels. At the peripheral tips of the anticlines the channel system flowed basinward.     

Triassic to Early Jurassic climatic trends recorded in the Jameson Land Basin,East Greenland: clay mineralogy,petrography and heavy mineralogy

During the Early Triassic the Jameson Land Basin (Central East Greenland) was located around 30° N, in the Northern arid belt, but by the Early Jurassic was positioned at a latitude of approximately 50° N. This study examines the record of this transition through a largely continental succession using clay mineralogy, sedimentology, petrography and heavy mineralogy. The Jameson Land Basin is aligned north–south and is 280 km long and 80 km wide. Following an Early Triassic marine phase the basin was filled by predominantly continental sediments. The Early‐to‐Late Triassic succession comprises coarse alluvial clastics (Pingo Dal Formation) overlain by a succession of fine‐grained evaporite‐rich playa/lacustrine sediments (Gipsdalen Formation), indicative of arid climatic conditions. The overlying buff, dolomitic and then red lacustrine mudstones with subordinate sandstones (Fleming Fjord Formation) record reduced aridity. The uppermost Triassic grades into dark organic‐rich, and in places coaly, mudstones and buff coarse‐grained sandstones of lacustrine origin that belong to the Kap Stewart Group, which spans the Triassic–Jurassic boundary, and appear to record more humid climatic conditions. Clay mineralogy analyses highlight significant variations in the kaolinite/illite ratio, from both mudstone and sandstone samples, through the Triassic and into the earliest Jurassic. Complementary heavy mineral analyses demonstrate that the variations recognised in clay mineralogy and sandstone maturity through the Triassic–Early Jurassic succession are not a product of major provenance change or the effect of significant diagenetic alteration. The observed variations are consistent with sedimentological evidence for a long‐term trend towards more humid conditions through the Late Triassic to Early Jurassic, and the suggestion of a significant pluvial episode in the mid‐Carnian.     

A Neoproterozoic glacially influenced basin margin succession and 'atypical' cap carbonate associated with bedrock palaeovalleys, Mirbat area, southern Oman

The Ayn Formation of the Neoproterozoic Mirbat Group comprises <400 m of little‐deformed, glacially influenced basin margin deposits. These deposits are preserved in several palaeovalleys eroded in crystalline basement and overlain by a discontinuous cap carbonate. The Ayn Formation and the cap carbonate, which are superbly exposed along a 20 km SW–NE‐striking escarpment in south Oman, provide important insights into the processes operating on a basin margin during a Neoproterozoic glaciation and its demise. The Ayn Formation comprises units of glacimarine rain‐out diamictite and sediment gravity flow deposits, alternated with units of fluvial and deltaic sandstones and conglomerates, which may have formed by proglacial outwash. The stratigraphic evolution of the Ayn Formation indicates a highly active hydrological cycle during a phase of overall (glacio‐eustatic?) low stand when glaciers advanced into and receded upon bedrock valleys. The transgressive cap carbonate was deposited primarily in shallow marine or shallow lacustrine environments over palaeohighs during the deglaciation, and was partly reworked into deeper parts of the basin through sediment gravity flow processes. Locally, the cap carbonate transgresses over crystalline basement containing a network of fissures filled with carbonate originating from the cap. The δ¹³C isotopic composition of the cap carbonate varies systematically between ?3.5 and +5.8‰ Pee Dee Belemnite standard, in common with other older Cryogenian examples.     

Lake basin response to tectonic drainage diversion: Eocene Green River Formation, Wyoming

A previously unidentified major sequence boundary within the Eocene Green River Formation separates fluctuating profundal facies of the Tipton Shale Member from evaporative facies of the Wilkins Peak Member. During deposition of the Tipton Shale Member, rivers entered the basin from the north, across the subdued Wind River Mountains, and deposited the southward prograding deltaic complex of the Farson Sandstone Member. Boulder-rich alluvial fan deposits overlie the Farson Sandstone adjacent to the Continental Fault, and correlate basinward to hypersaline lacustrine deposits of the Wilkins Peak Member. The alluvial fan deposits record a period of reverse motion on the Continental Fault and uplift of the southeastern Wind River Range, which diverted drainage away from the greater Green River Basin. This decreased inflow caused Lake Gosiute to shrink, exposing its bed to desiccation and erosion, and contributed to hydrologically-closed conditions and periodic evaporite deposition thereafter. This study is one of the first to demonstrate a direct relationship between movement along a specific basin-bounding structure, and a change in the overall style of lacustrine sedimentation. The identification of similar relationships elsewhere may challenge conventional interpretations of climate as the dominant factor influencing the character of lake deposits, and provide an important, but previously unexploited, approach to interpreting continental deformation and regional drainage organization.     

Significance of the clay mineral distribution in fluvial sediments of the Neogene to Recent Himalayan Foreland Basin (west‐central Nepal)

Clay mineral assemblages of the Neogene Himalayan foreland basin are studied to decipher their significance with respect to tectonic and climate processes. Fluvial deposits of the Siwalik Group (west‐central Nepal), and sediment of the Ganga River drainage system were analysed for clay mineralogy. The observed clay mineral assemblages are mainly composed of illite (dominant), chlorite, smectite and kaolinite. Illite and chlorite are chiefly of detrital origin, derived from Himalayan sources. Kaolinite and smectite are authigenic, and mainly developed within pore space and as coating of detrital particles. With increasing burial, diagenetic processes affected the original clay mineral signature. Illitisation of smectite and kaolinite occurred below 2500 and 3500 m depth, respectively. Therefore, illite in the lower parts of the Siwalik Group consists of a mixture of inherited illite and illitised smectite and kaolinite, as suggested by illite crystallinity. Detrital grains that make up the framework of the Siwalik Group sandstones mainly consist of quartz, feldspar and lithic fragments, which are principally of sedimentary and metamorphic origin. Lithoclast content increases over time at the expense of quartz and K‐feldspar in response to uplift and erosion of the Lesser Himalaya Series since about 11–10 Ma. Despite mainly felsic source rocks, dominantly physical erosion processes in the Himalayan belt, and high‐energy fluvial depositional systems, smectite is abundant in the <7 Ma Siwalik Group deposits. Analyses of the Siwalik deposits and comparison with the clay mineralogy of the modern drainage system suggest that smectite preferentially formed in floodplains and intermontane valleys during early diagenesis because of downward percolating fluids rich in cations from weathering and soil development. In general, increasing seasonality and aridity linked to variability of the Asian monsoon from about 8 Ma enhanced clay mineral formation and development of authigenic smectite in paleo‐plains on the southern side of the Himalaya.     

Source to sink relations between the Tian Shan and Junggar Basin (northwest China) from Late Palaeozoic to Quaternary: evidence from detrital U‐Pb zircon geochronology

The tectonic evolution of the Tian Shan, as for most ranges in continental Asia is dominated by north‐south compression since the Cenozoic India‐Asia collision. However, precollision governing tectonic processes remain enigmatic. An excellent record is provided by thick Palaeozoic – Cenozoic lacustrine to fluvial depositional sequences that are well preserved in the southern margin of the Junggar Basin and exposed along a foreland basin associated to the Late Cenozoic rejuvenation of the Tian Shan ranges. U/Pb (LA‐ICP‐MS) dating of detrital zircons from 14 sandstone samples from a continuous series ranging in age from latest Palaeozoic to Quaternary is used to investigate changes in sediment provenance through time and to correlate them with major tectonic phases in the range. Samples were systematically collected along two nearby sections in the foreland basin. The results show that the detrital zircons are mostly magmatic in origin, with some minor input from metamorphic zircons. The U‐Pb detrital zircon ages range widely from 127 to 2856 Ma and can be divided into four main groups: 127–197 (sub‐peak at 159 Ma), 250–379 (sub‐peak at 318 Ma), 381–538 (sub‐peak at 406 Ma) and 543–2856 Ma (sub‐peak at 912 Ma). These groups indicate that the zircons were largely derived from the Tian Shan area to the south since a Late Carboniferous basin initiation. The provenance and basin‐range pattern evolution of the southern margin of Junggar Basin can be generally divided into four stages: (1) Late Carboniferous – Early Triassic basin evolution in a half‐graben or post‐orogenic extensional context; (2) From Middle Triassic to Upper Jurassic times, the southern Junggar became a passively subsiding basin until (3) being inverted during Lower Cretaceous – Palaeogene; (4) During the Neogene, a piedmont developed along the northern margin of the North Tian Shan block and Junggar Basin became a true foreland basin.     

Sedimentary facies,depositional processes and climatic controls in a Triassic Lake,Tanzhuang Formation,western Henan Province,China

The Middle to Upper Triassic Tanzhuang Formation represents part of the infill of the early Mesozoic Jiyuan-Yima Basin. The upper part of this stratigraphic unit records deposition within prevailing shallow lake conditions. Well-developed sequences crop out near Jiyuan, western Henan Province, central China. Six sedimentary facies clustered into two facies assemblages were recognized in the lacustrine section. Facies assemblage 1 consists of stacked coarsening-upward sequences composed, from base to top, of organic-rich shales (facies E, type I), laminated siltstones (facies A) and current-rippled laminated sandstones (facies B). Units of assemblage 1 record progradation of small mouth-bar deltas within a perennial open lacustrine system under temperate and humid conditions. Facies assemblage 2 lacks a clear vertical pattern and consists of interbedded fine-grained carbonates and siltstones (facies C); deformed and wave-reworked sandstones (facies D); organic-rich shales (facies E, type II) and clayey mudstones (facies F). The assemblage also represents a perennial, hydrologically-open, shallow lacustrine system, but characterized by strong seasonal climatic control. Water stratification probably occurred in several periods of the lake history. Pangaean megamonsoonal influence is envisaged to explain the strong seasonality imprint evidenced toward the upper part of the Tanzhuang lacustrine column.This is the fourth paper in a series of papers published in this issue on Climatic and Tectonic Rhythms in Lake Deposits.     

Tectonic controls on Cenozoic foreland basin development in the north‐eastern Andes,Colombia

In order to evaluate the relationship between thrust loading and sedimentary facies evolution, we analyse the progradation of fluvial coarse‐grained deposits in the retroarc foreland basin system of the northern Andes of Colombia. We compare the observed sedimentary facies distribution with the calculated one‐dimensional (1D) Eocene to Quaternary sediment‐accumulation rates in the Medina wedge‐top basin and with a three‐dimensional (3D) sedimentary budget based on the interpretation of ～1800 km of industry‐style seismic reflection profiles and borehole data. Age constraints are derived from a new chronostratigraphic framework based on extensive fossil palynological assemblages. The sedimentological data from the Medina Basin reveal rapid accumulation of fluvial and lacustrine sediments at rates of up to ～500 m my^?1 during the Miocene. Provenance data based on gravel petrography and paleocurrents reveal that these Miocene fluvial systems were sourced from Upper Cretaceous and Paleocene sedimentary units exposed to the west in the Eastern Cordillera. Peak sediment‐accumulation rates in the upper Carbonera Formation and the Guayabo Group occur during episodes of coarse‐grained facies progradation in the early and late Miocene proximal foredeep. We interpret this positive correlation between sediment accumulation and gravel deposition as the direct consequence of thrust activity along the Servitá–Lengupá faults. This contrasts with one class of models relating gravel progradation in more distal portions of foreland basin systems to episodes of tectonic quiescence.     

Lacustrine basin hydrocarbon exploration – current thoughts

Although much of the world's petroleum resource-base is associated with marine systems, regionally lacustrine petroleum systems are important. Individual accumulations may exceed several billion barrels. In each of these cases the oil is derived from a lacustrine source rock and may be produced from either nonmarine or marine reservoir rocks. The purpose of this paper is to describe the factors that control lacustrine source rock development and the nature of lacustrine reservoirs. Lacustrine oils display different physical and chemical characteristics than their marine counterparts. These differences can be related to the nature of their precursor material. Although the nature of the products are different, the geochemical threshold criteria for defining source rocks in both settings are the same because of common expulsion requirements. Commercially significant lacustrine systems require the presence of large, long-lived lakes. Such lake settings are tectonic in origin and restricted to climatic settings where precipitation exceeds evaporation. Within these large lake systems three primary factors determine source rock potential and quality. These factors are primary productivity level, organic preservation potential, and matrix sedimentation rate, which controls the dilution of preserved organic matter. Source rock potential is maximized where both productivity and preservation potential are maximized and sedimentation rate is minimized. To some degree these factors can compensate for each other. Hydrocarbon reservoir potential within lacustrine basins is partially impacted by overall tectonic setting. Within extensional settings, transport distances tend to be limited, with much of the sediment being transported away from the basin. The sediments delivered to the lake are poorly sorted and sedimentologically immature, commonly resulting in poor reservoirs due to both primary properties and their susceptibility to diagenesis. Within rifts better reservoirs tend to develop along platform or flexural margins. Stacking of reservoirs is important in lacustrine systems but baffles and barriers are often present between individual sand units. These barriers form as a result of lake level fluctuations. In compressional settings transport distances tend to be longer, resulting in more mature, better sorted sediments leading to higher quality reservoirs. These reservoirs typically develop in fluvial-deltaic and wave-dominated shoreline settings. Lacustrine carbonate reservoirs are locally important. These carbonates tend to develop during lake level lowstands and are dependent on diagenesis (dissolution and karstification) for porosity and permeability development. Lacustrine reservoirs are often stratigraphically and areally limited and display low individual well production rates. Within pure lacustrine systems exploration opportunities appear to be often restricted by either reservoir presence or quality (i.e., production rates). The best exploration opportunities in lacustrine basins appear to be associated with hybrid systems where a lacustrine source and marine reservoir exist.     

Continental systems tracts of the Brazilian Cretaceous Bauru Basin and their relationship with the tectonic and climatic evolution of South America

The application of sequence stratigraphy concepts to continental deposits lacking the referece provided sea level has been a challenge, mainly because the temporal relationships between stratigraphic surfaces and systems tracts depend on the tectonic and climatic evolution of the area. Using the concept of accommodation space (A) and sediment supply (S), we identify specific stacking patterns of aeolian, lacustrine, fluvial and alluvial systems that correspond to the particular tectonic and climatic evolution of the southeastern portion of South America. With the end of the Early Cretaceous volcanism (133 Ma), the southeastern portion of South America underwent tectonic restructuring, which generated basins that encompassed continental sedimentary sequences. The tectonic events responsible for the accumulation of these sequences occurred during two primary phases. The first phase is related to Early Cretaceous thermal subsidence, which was more pronounced in the regions where the thickest Serra Geral Formation basaltic successions are found, resulting in the formation of Bauru Basin. The second phase was related to the Late Cretaceous uplift in southeastern Brazil as a result of magmatic/volcanic activity associated with the Trindade Mantle Plume. Stratigraphic analysis based on well‐logs and outcrops and aided by petrographic studies identified three sequences that are bounded by regional unconformities that record important changes in the Bauru Basin's tectonic and paleoenvironmental conditions. The unconformity K‐0 is related to the origin of the Bauru Basin in the Early Cretaceous. The Early Cretaceous Sequence 1 (Caiuá Group) is interpreted as a second‐ order sequence, formed by aeolian and fluvial deposits and constituting a Fluvial‐Aeolian Systems Tract. Unconformity K‐1 that was generated in the Late Cretaceous (Cenomanian – Campanian?) is related to the tectonic evolution of the basin and source area. Overlying Unconformity K‐1, lacustrine, fluvial and alluvial deposits display progradational characteristics of the two‐third‐ order sequences: Sequences 2A and 2B, constituted by the Fluvial‐Lacustrine and Alluvial Systems Tracts, respectively, and separated by the Unconformity K‐1A. Sedimentological characteristics, paleosols and stratigraphic architecture, suggest that A/S ratio was neutral in the late stage of the Sequence 1, whereas in the Sequence 2 there was an increase (Sequence 2A) followed by a decrease in the A/S ratio (Sequence 2B). Aeolian facies and paleosol P1 (Sequence 1), fluvial‐lacustrine facies and hydromorphic soils (Sequence 2A), and alluvial facies and Paleosol P2 (Sequence 2B), indicate climatic changes in the South American during the Cretaceous. The stratigraphic framework, subaerial unconformities and paleosols provide key elements for subdividing of the Brazilian continental sequence into third‐order sequences and systems tracts, for identification of allocyclic and autocyclic patterns in time and space.     

The Miocene tectono-sedimentary evolution of the southern Tyrrhenian Sea: stratigraphy, structural and palaeomagnetic data from the on-shore Amantea basin (Calabrian Arc, Italy)

We report on new stratigraphic, palaeomagnetic and anisotropy of magnetic susceptibility (AMS) results from the Amantea basin, located on‐shore along the Tyrrhenian coast of the Calabrian Arc (Italy). The Miocene Amantea Basin formed on the top of a brittlely extended upper plate, separated from a blueschist lower plate by a low‐angle top‐to‐the‐west extensional detachment fault. The stratigraphic architecture of the basin is mainly controlled by the geometry of the detachment fault and is organized in several depositional sequences, separated by major unconformities. The first sequence (DS1) directly overlaps the basement units, and is constituted by Serravallian coarse‐grained conglomerates and sandstones. The upper boundary of this sequence is a major angular unconformity locally marked by a thick palaeosol (type 1 sequence boundary). The second depositional sequence DS2 (middle Tortonian‐early Messinian) is mainly formed by conglomerates, passing upwards to calcarenites, sandstones, claystones and diatomites. Finally, Messinian limestones and evaporites form the third depositional sequence (DS3). Our new biostratigraphic data on the Neogene deposits of the Amantea basin indicate a hiatus of 3 Ma separating sequences DS1 and DS2. The structural architecture of the basin is characterized by faulted homoclines, generally westward dipping, dissected by eastward dipping normal faults. Strike‐slip faults are also present along the margins of the intrabasinal structural highs. Several episodes of syn‐depositional tectonic activity are marked by well‐exposed progressive unconformities, folds and capped normal faults. Three main stages of extensional tectonics affected the area during Neogene‐Quaternary times: (1) Serravallian low‐angle normal faulting; (2) middle Tortonian high‐angle syn‐sedimentary normal faulting; (3) Messinian‐Quaternary high‐angle normal faulting. Extensional tectonics controlled the exhumation of high‐P/low‐T metamorphic rocks and later the foundering of the Amantea basin, with a constant WNW‐ESE stretching direction (present‐day coordinates), defined by means of structural analyses and by AMS data. Palaeomagnetic analyses performed mainly on the claystone deposits of DS1 show a post‐Serravallian clockwise rotation of the Amantea basin. The data presented in this paper constrain better the overall timing, structure and kinematics of the early stages of extensional tectonics of the southern Tyrrhenian Sea. In particular, extensional basins in the southern Tyrrhenian Sea opened during Serravallian and evolved during late Miocene. These data confirm that, at that time, the Amantea basin represented the conjugate extensional margin of the Sardinian border, and that it later drifted south‐eastward and rotated clockwise as a part of the Calabria‐Peloritani terrane.     

The Tajik Basin: A composite record of sedimentary basin evolution in response to tectonics in the Pamir

Investigation of a >6-km-thick succession of Cretaceous to Cenozoic sedimentary rocks in the Tajik Basin reveals that this depocentre consists of three stacked basin systems that are interpreted to reflect different mechanisms of subsidence associated with tectonics in the Pamir Mountains: a Lower to mid-Cretaceous succession, an Upper Cretaceous–Lower Eocene succession and an Eocene–Neogene succession. The Lower to mid-Cretaceous succession consists of fluvial deposits that were primarily derived from the Triassic Karakul–Mazar subduction–accretion complex in the northern Pamir. This succession is characterized by a convex-up (accelerating) subsidence curve, thickens towards the Pamir and is interpreted as a retroarc foreland basin system associated with northward subduction of Tethyan oceanic lithosphere. The Upper Cretaceous to early Eocene succession consists of fine-grained, marginal marine and sabkha deposits. The succession is characterized by a concave-up subsidence curve. Regionally extensive limestone beds in the succession are consistent with late stage thermal relaxation and relative sea-level rise following lithospheric extension, potentially in response to Tethyan slab rollback/foundering. The Upper Cretaceous–early Eocene succession is capped by a middle Eocene to early Oligocene (ca. 50–30 Ma) disconformity, which is interpreted to record the passage of a flexural forebulge. The disconformity is represented by a depositional hiatus, which is 10–30 Myr younger than estimates for the initiation of India–Asia collision and overlaps in age with the start of prograde metamorphism recorded in the Pamir gneiss domes. Overlying the disconformity, a >4-km-thick upper Eocene–Neogene succession displays a classic, coarsening upward unroofing sequence characterized by accelerating subsidence, which is interpreted as a retro-foreland basin associated with crustal thickening of the Pamir during India–Asia collision. Thus, the Tajik Basin provides an example of a long-lived composite basin in a retrowedge position that displays a sensitivity to plate margin processes. Subsidence, sediment accumulation and basin-forming mechanisms are influenced by subduction dynamics, including periods of slab-shallowing and retreat.     

Sedimentary sequences, seismofacies and evolution of depositional systems of the Oligo/Miocene Lower Freshwater Molasse Group, Switzerland

ABSTRACT Magnetostratigraphic chronologies, together with sedimentological, petrological, seismic and borehole data derived from the Oligo/Miocene Lower Freshwater Molasse Group of the North Alpine foreland basin enable a detailed reconstruction of alluvial architecture in relation to Alpine orogenic events. Six depositional systems are recorded in the Lower Freshwater Molasse Group. The bajada depositional system comprises 200–400-m-thick successions of ribbon channel conglomerates and overbank fines including mud- and debris-flows which were derived from the Alpine border chain. The alluvial megafan depositional system is made up of massive pebble-to-cobble conglomerates up to 3 km thick which reveal a fan-shaped geometry. This depositional environment grades downcurrent into the conglomerate channel belt depositional system, which comprises an ≈2-km-thick alternation of channel conglomerates and overbank fines. The sandstone channel belt depositional system is bordered by the 100–400-m-thick overbank fines assigned to the floodplain depositional system. At the feather edge of the basin, 50–400-m-thick lacustrine sediments in both clastic and carbonate facies represent the lacustrine depositional system. The spatial and temporal arrangement of these depositional systems was controlled by the geometrical evolution of the Molasse Basin. During periods of enhanced sediment supply and during phases of stable sliding of the entire wedge, >2000-m-thick coarsening-and thickening-upward megasequences comprising the conglomerate channel belt, alluvial megafan and bajada depositional systems were deposited in a narrow wedge-shaped basin. In the distal reaches of the basin, however, no sedimentary trend developed, and the basin fill comprises a <500-m-thick series of sandstone meander belt, floodplain and lacustrine depositional systems. During phases of accretion at the toe of the wedge, the basin widened, and prograding systems of multistorey channel sandstones extended from the thrust front to the distal reaches of the basin. The rearrangement of the depositional systems as a function of changing orogenic conditions created discordances, which are expressed seismically by onlap and erosion of beds delimiting sedimentary sequences. Whereas stable sliding of the wedge succeeded by accretion at the toe of the wedge is recorded in the proximal Lower Freshwater Molasse by a coarsening-and thickening-upward megasequence followed by erosion, the opposite trend developed in the distal reaches of the Molasse. Here, fine-grained sandstones and mudstones were deposited during periods of stable sliding, whereas phases of accretion caused a coarsening- and thickening-up megasequence to form.     

New seismic stratigraphy and Late Tertiary history of the North Tanganyika Basin, East African Rift system, deduced from multichannel and high-resolution reflection seismic data and piston core evidence

Abstract We present here the initial results of a high-resolution (sparker) reflection seismic survey in Northern Lake Tanganyika, East African Rift system. We have combined these results with data from earlier multichannel reflection seismic and 5-kHz echosounding surveys. The combination of the three complementary seismic investigation methods has allowed us to propose a new scenario for the late Aliocene to Recent sedimentary evolution of the North Tanganyika Basin. Seismic sequences and regional tectonic information permit us to deduce the palaeotopography at the end of each stratigraphic sequence. The basin history comprises six phases interpreted to be responses to variations in regional tectonism and/or climate. Using the reflection seismic-radiocarbon method (RSRM), the minimum ages for the start of each phase (above each sequence boundary) are estimated to be: ?7.4 Ma, ? 1.1 Ma, ?393–363 ka, ?295–262 ka, ? 193–169 ka, ?40–35 ka. Corresponding lowstand lake elevations below present lake level for the last five phases are estimated to have been: ?650–700 m, ?350 m, ?350 m, ?250 m and ? 160 m, respectively. The latest phase from ?40–35 ka until the present can be subdivided into three subphases separated by two lowstand periods, dated at ?23 ka and ? 18 ka. From the late Miocene until the mid Pleistocene, large-scale patterns of sedimentation within the basin were primarily controlled by tectonism. In contrast, from the mid Pleistocene to the present, sedimentation in Lake Tanganyika seems to have responded dramatically to climatic changes as suggested by repeated patterns of lake level fluctuations. During this period, the basin infill history is characterized by the recurrent association of three types of deposits: ‘basin fill’ accumulations; lens-shaped ‘deep lacustrine fans’; and ‘sheet drape’ deposits. The successive low-lake-level fluctuations decreased in intensity with time as a consequence of rapid sedimentary filling under conditions of declining tectonic subsidence. The climate signal has thus been more pronounced in recent sedimentary phases as tectonic effects have waned.