Evaluation of the dynamic <Emphasis Type="Italic">p</Emphasis>–<Emphasis Type="Italic">y</Emphasis><Subscript>p</Subscript> loops of pile-supported structures on sloping ground

A key issue in the design of pile-supported structures on sloping ground is soil–pile interaction, which becomes more complicated in case of dynamic loading. This study aimed to evaluate the effect of slope on the dynamic behavior of pile-supported structures by performing a series of centrifuge tests. Three models were prepared by varying the slope and soil density of dry sand grounds. The mass supported on 3 by 3 group piles was shaken applying sinusoidal wave with various amplitudes. Test results showed that the location of maximum values and distribution shape of the bending moment below the ground surface varied noticeably with the pile position in the slope case. The relationship between the soil resistance and pile deflection (p–y_p loops) was carefully evaluated by applying the piecewise cubic spline method to fit the measured bending moment curves along piles. It was found that the shape of the p–y_p loops was irregular due to the effect of slope, and immensely influenced by the movement of the unstable zone. In addition, the effect of the pile group in the horizontal case was evaluated by comparing with the previously suggested curves that represent the relationship between the soil resistance and pile–soil relative displacement (p–y curves) to propose the multiplier coefficients.     

Flow over a rounded backward-facing step,using a <Emphasis Type="Italic">z</Emphasis>-coordinate model and a <Emphasis Type="Italic">σ</Emphasis>-coordinate model

Homogeneous, nonrotating flow over a backward-facing rounded step is simulated using the 2D vertical version of two general circulation models, a z-coordinate model—the Massachusetts Institute of Technology general circulation model (MITgcm)—and a σ-coordinate model—the Bergen Ocean Model (BOM). The backward-facing step is a well-known testcase since it is geometrically simple but still embodies important flow characteristics such as separation point, reattachment length, and recirculation of the flow. The study compares the core of the two models and uses constant eddy viscosities and diffusivities. The Reynolds numbers ranges from 2·10² to 2·10⁶. The results correspond with previously published results having a relatively stationary separation point and a fluctuating reattachment length due to downslope propagating eddies released from the reattachment zone for Reynolds numbers higher than or equal to 2 · 10⁴. For Reynolds number within the laminar regime, the flow is stationary. The discrepancies between the models increase by enhancing Reynolds numbers. The σ-coordinate model experiences a reduction in eddy sizes with increasing resolution and Reynolds numbers in correspondence with published experiments, while the size of the eddies are independent of the Reynolds number using the MITgcm. Due to mixing generated by the staircase topography, the z-coordinate model gives a better convergence of the separation point and reattachment length compared with the BOM; however, this conclusion might change with the inclusion of a relevant turbulence scheme.     

Simulating CO<Subscript>2</Subscript> transport into the ocean from a CO<Subscript>2</Subscript> lake at the seafloor using a <Emphasis Type="Italic">z</Emphasis>- and a <Emphasis Type="Italic">σ</Emphasis>-coordinate model

The ocean takes up approximately 2 GT carbon per year due to the enhanced CO₂ concentrations in the atmosphere. Several options have been suggested in order to reduce the emissions of CO₂ into the atmosphere, and among these are CO₂ storage in the deep ocean. Topographic effects of dissolution and transport from a CO₂ lake located at 3,000-m depth have been studied using the z-coordinate model Massachusetts Institute of Technology general circulation model (MITgcm) and the σ-coordinate model Bergen ocean model (BOM). Both models have been coupled with the general ocean turbulence model (GOTM) in order to account for vertical subgrid processes. The chosen vertical turbulence mixing scheme includes the damping effect from stable stratification on the turbulence intensity. Three different topographic scenarios are presented: a flat bottom and the CO₂ lake placed within a trench with depths of 10 and 20 m. The flat case scenario gives good correlation with previous numerical studies of dissolution from a CO₂ lake. When topography is introduced, it is shown that the z-coordinate model and the σ-coordinate model give different circulation patterns in the trench. This leads to different dissolution rates, 0.1 μmol cm^− 2 s^− 1 for the scenario of a 20-m-deep trench using BOM and 0.005–0.02 μmol cm^− 2 s^− 1 for the same scenario using the MITgcm. The study is also relevant for leakages of CO₂ stored in geological formations and to the ocean.     

Deep structural characteristics and seismogenesis of the <Emphasis Type="Italic">M</Emphasis>≥8.0 earthquakes in North China

Based on the results from seismogeological study, aeromagnetic inversion and deep seismic sounding (DSS), it is found that the M≥8.0 earthquakes in North China have three common deep structural characteristics, i.e., they all took place above the ultra-crustal deep faults or on the edges of the tectonic blocks with higher intensity, and there are low-velocity, low-density and high-conductive layers deep in the epicentral regions. The origins of the earthquakes are also discussed and the two possibilities of seismogenesis are proposed, i.e., tectonic movement and intracrustal explosion.     

The spatiotemporal analysis of the minimum magnitude of completeness <Emphasis Type="Italic">Mc</Emphasis> and the Gutenberg–Richter law <Emphasis Type="Italic">b</Emphasis>-value parameter using the earthquake catalog of Greece

Spatiotemporal mapping the minimum magnitude of completeness Mc and b-value of the Gutenberg–Richter law is conducted for the earthquake catalog data of Greece. The data were recorded by the seismic network of the Institute of Geodynamics of the National Observatory of Athens (GINOA) in 1970–2010 and by the Hellenic Unified Seismic Network (HUSN) in 2011–2014. It is shown that with the beginning of the measurements at HUSN, the number of the recorded events more than quintupled. The magnitude of completeness Mc of the earthquake catalog for 1970–2010 varies within 2.7 to 3.5, whereas starting from April 2011 it decreases to 1.5–1.8 in the central part of the region and fluctuates around the average of 2.0 in the study region overall. The magnitude of completeness Mc and b-value for the catalogs of the earthquakes recorded by the old (GINOA) and new (HUSN) seismic networks are compared. It is hypothesized that the magnitude of completeness Mc may affect the b-value estimates. The spatial distribution of the b-value determined from the HUSN catalog data generally agrees with the main geotectonic features of the studied territory. It is shown that the b-value is below 1 in the zones of compression and is larger than or equal to 1 in the zones dominated by extension. The established depth dependence of the b-value is pretty much consistent with the hypothesis of a brittle–ductile transition zone existing in the Earth’s crust. It is assumed that the source depth of a strong earthquake can probably be estimated from the depth distribution of the b-value, which can be used for seismic hazard assessment.     

Limitations of <Emphasis Type="Italic">H</Emphasis>-<Emphasis Type="Italic">κ</Emphasis> stacking: ambiguous results caused by crustal layering

Over the past decade, the H-κ stacking technique of Zhu and Kanamori (J Geophys Res 105:2969–2980, 2000) has become a standard tool to determine the crustal thickness H and the bulk crustal v_P/v_S ratio κ from teleseismic receiver functions. It is obvious that unfavorable noise conditions as well as a complex 3D velocity structure can severely hamper the interpretation of receiver-function data. However, we observe that ambiguities can even arise from a simple 1D layered velocity structure which raises a high potential for misinterpretations. To analyze the feasibility and basic limitations of the H-κ stacking method, we conduct a series of tests based on synthetic data. The impact of different given elementary parameters, related either to the velocity structure or to the data processing, is evaluated in a series of eight individual tests. We deliberately exclude complications such as 3D structural variations and/or noise to show that even a simple 1D velocity structure, involving, e.g., an additional inter-crustal discontinuity, can have significant consequences for the interpretation of the results. However, our modeling suggests that more complex crustal structures may lead to even less reliable results. Additionally, our tests illustrate that time shifts of the maxima in the H-κ domain due to the superposition and merging of individual phases can lead to significantly overestimated v_P/v_S ratios. In general, the depth to the Moho (or other discontinuities of interest) is less significantly affected. Our tests indicate the necessity to accurately check delay times derived from the maxima of the H-κ stacks against corresponding phases in the receiver functions. Repeating the stacking with varied weighting factors and filter ranges can help to reduce the ambiguities and to avoid possible misinterpretation.     

Probability gains of an epidemic-type aftershock sequence model in retrospective forecasting of <Emphasis Type="Italic">M</Emphasis> ≥ 5 earthquakes in Italy

A stochastic triggering (epidemic) model incorporating short-term clustering was fitted to the instrumental earthquake catalog of Italy for event with local magnitudes 2.6 and greater to optimize its ability to retrospectively forecast 33 target events of magnitude 5.0 and greater that occurred in the period 1990–2006. To obtain an unbiased evaluation of the information value of the model, forecasts of each event use parameter values obtained from data up to the end of the year preceding the target event. The results of the test are given in terms of the probability gain of the epidemic-type aftershock sequence (ETAS) model relative to a time-invariant Poisson model for each of the 33 target events. These probability gains range from 0.93 to 32000, with ten of the target events yielding a probability gain of at least 10. As the forecasting capability of the ETAS model is based on seismic activity recorded prior to the target earthquakes, the highest probability gains are associated with the occurrence of secondary mainshocks during seismic sequences. However, in nine of these cases, the largest mainshock of the sequence was marked by a probability gain larger than 50, having been preceded by previous smaller magnitude earthquakes. The overall evaluation of the performance of the epidemic model has been carried out by means of four popular statistical criteria: the relative operating characteristic diagram, the R score, the probability gain, and the log-likelihood ratio. These tests confirm the superior performance of the method with respect to a spatially varying, time-invariant Poisson model. Nevertheless, this method is characterized by a high false alarm rate, which would make its application in real circumstances problematic.     

Structural analysis and interpretation of the surface deformation associated with the Ning’er,Yunnan Province,China <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>6.4 earthquake of June 3, 2007

The seismogenic fault and the dynamic mechanism of the Ning’er, Yunnan Province M_S6.4 earthquake of June 3, 2007 are studied on the basis of the observation data of the surface fissures, sand blow and water eruption, landslide and collapse associated with the earthquake, incorporating with the data of geologic structures, focal mechanism solutions and aftershock distribution for the earthquake area. The observation of the surface fissures reveals that the Banhai segment of the NW-trending Ning’er fault is dominated by right-lateral strike-slip, while the NNE-trending fault is dominated by left-lateral strike-slip. The seismo-geologic hazards are concentrated mainly within a 330°-extending zone of 13.5 km in length and 4 km in width. The major axis of the isoseismal is also oriented in 330° direction, and the major axis of the seismic intensity VIII area is 13.5 km long. The focal mechanism solutions indicate that the NW-trending nodal plane of the Ning’er M_S6.4 earthquake is dominated by right-lateral slip, while the NE-trending nodal plane is dominated by left-lateral slip. The preferred distribution orientation of the aftershocks of M_S≥2 is 330°, and the focal depths are within the range of 3～12 km, predominantly within 3～10 km. The distribution of the aftershocks is consistent with the distribution zone of the seismo-geologic hazards. All the above-mentioned data indicate that the Banhai segment of the Ning’er fault is the seismogenic fault of this earthquake. Moreover, the driving force of the Ning’er earthquake is discussed in the light of the active block theory. It is believed that the northward pushing of the Indian plate has caused the eastward slipping of the Qinghai-Tibetan Plateau, which has been transformed into the southeastern-southernward squeezing of the southwest Yunnan region. As a result, the NW-trending faults in the vicinity of the Ning’er area are dominated by right-lateral strike-slip, while the NE-trending faults are dominated by left-lateral strike-slip. This tectonic framework might be the main cause of the frequent occurrence of M_S6.0～6.9 earthquakes in the area.     

Strong motion characteristics of the <Emphasis Type="Italic">M</Emphasis><Subscript>w</Subscript> 6.6 Lushan earthquake,Sichuan, China — an insight into the spatial difference of a typical thrust fault earthquake

Near-field strong ground motions are useful for engineering seismology studies and seismic design, but dense observation networks of damaging earthquakes are still rare. In this study, based on the strong-motion data from the M w 6.6 Lushan earthquake, the ground motion parameters in different spatial regions are systematically analyzed, and the contributions from different effects, like the hanging-wall effect, directivity effect, and attenuation effect are separated to the extent possible. Different engineering parameters from the observed ground motions are compared with the local design response spectra and a new attenuation relation of Western China. General results indicate that the high frequency ground motion, like the peak ground acceleration, on two sides of the fault plane is sensitive to the hanging-wall effect, whereas the low frequency ground motion, like the long period spectral acceleration, in the rupture propagation direction is affected by the directivity effect. Moreover, although the M w 6.6 Lushan earthquake is not a large magnitude event, the spatial difference of ground motion is still obvious; thus, for a thrust faulting earthquake, in addition to the hanging effect, the directivity effect should also be considered.     

Study on the velocity structure of the crust in Southwest Yunnan of the north-south seismic belt—Results from the Menghai-Gengma-Lushui deep seismic sounding profile

Southwest Yunnan, located in the southern segment of the north-south seismic belt, is one of the regions with strong tectonic movement and seismic activity in China. Study on the characteristics of tectonic setting and deep geophysical field in the region is an important issue in basic science. In 2013, we conducted a 600-km-long Menghai-Gengma-Lushui profile of deep seismic wide-angle reflection/refraction and high-resolution seismic refraction in Southwest Yunnan. In this paper, we use 6 groups of clear intracrustal P-wave phases picked from the seismic record sections of 11 shots to build a velocity structure model of basement and 2D crustal P-wave of the region by using finite difference inversion and ray travel time forward fitting technology. The results show that, from south to north, the crust gradually thickens along the profile and its basement shows a significant lateral heterogeneity. In the vicinity of the Nanting River fault, the basement structure shows the character of alternate depressions and uplifts, and the shallowest basement is about 1.0 km. In the vicinity of Tengchong and Lancang, the basement is about 5.0 km deep. The velocity of the middle and lower crust in the region generally increases with the increasing of depth. At the block boundary and beneath the fault tectonic belt, the velocity contours show apparent irregularity and the P-wave velocity changes sharply. In this region, the Moho gradually deepens from south to north with relatively large lateral undulations. The shallowest point of the Moho is located near Menghai at a depth of about 32.0 km. The deepest point of the Moho is located near Tengchong at a depth of about 40.5 km. Between Gengma and Yongde, the Moho shows significantly fast uplifting and depressing with an amplitude of about 4.0 km. Beneath the Nanting River fault, Longling-Ruili fault, Dayingjiang fault and Tengchong volcano, the basement velocity structure, 2D crustal P-wave velocity structure, distribution of average profile velocity and intracrustal interface spreading also show significant changes from the basement to the top of the Moho, indicating that the crustal velocity and medium physical properties beneath the fault tectonic belt are apparently different from the crustal materials on its both sides, which suggests that these faults should be in a certain scale and may extend to the lower crust or the top of the upper mantle. The earthquakes in the region mainly occurred at a depth of 10–20 km, and the seismic activity is related to the intracrustal medium velocity difference and fault belt distribution. The results can serve as the important data of the crust-mantle structure for the analysis of the deep tectonic setting, earthquake precise positioning, seismogenic structure modeling of the seismic activities in Southwest Yunnan, as well as the important reference for the evaluation of seismic hazard and the planning of earthquake disaster mitigation of this region.     

Quasi-wave variations in <Emphasis Type="Italic">foEs</Emphasis> during stratospheric warmings of 2008–2010 according to data from Kaliningrad ionospheric station

The results of analysis of variations in the sporadic layer critical frequency (foEs) for winter periods of 2008–2010 in which sudden stratospheric warmings were observed are presented in the paper. The data were obtained at Kaliningrad ionospheric station (54.6° N, 20° E) by a Parus digital ionosonde under the usual sounding regime with an interval of 15 min. Daily mean values of foEs were used for the analysis. Solar and geomagnetic activity remained low during the periods under study, making it possible to relate the quasiwave time variations in foEs to the parameters of stratospheric warmings. The results of spectral analysis performed on the basis of continuous wavelet transform showed that, during all warmings occurring in 2008–2010, time variations in foEs show the presence of wave processes with a period of an order of 5 days and longer ones with a period of ~10—11 days. These periods coincide with characteristic periods of planetary waves observed in the atmosphere during sudden stratospheric warnings.     

<Emphasis Type="Italic">Homo erectus pekinensis’s</Emphasis> age and environment— with discussion on the relationship among<Emphasis Type="Italic">Homo erectos</Emphasis> from Beijing,Nanjing and Chenjiawo

This paper inspects the relationship betweenHomo erectus from Beijing, Nanjing and Chenjiawo on the viewpoint of environmental variations. Pieces of evidence show that Nanjing and ChenjiawoHomo erectus lived in glacial age at the Marine Oxygen Isotope Stage (MIS) 16, whileHomo erectus pekinensis in major interglacial age at MISs 15-13. It is also recovered that the cave deposits in Tangshan, Nanjing, and Zhoukoudian, Beijing, as well as the deposits at theHomo erectus site in Chenjiawo, have undergone some similar development process. All of them originated from early-middle Middle Pleistocene, and have gone through the test of the major glacial age at MIS 16 and the major interglacial period at the paleosol stage S₅. At the same time, they were also closely connected with some environment events, such as the uplift of the Qinghai-Xizang Plateau, the formation of glaciations and the loess accumulations.     

The ratio between corner frequencies of source spectra of <Emphasis Type="Italic">P</Emphasis>- and <Emphasis Type="Italic">S</Emphasis>-waves—a new discriminant between earthquakes and quarry blasts

This study analyzes and compares the P- and S-wave displacement spectra from local earthquakes and explosions of similar magnitudes. We propose a new approach to discrimination between low-magnitude shallow earthquakes and explosions by using ratios of P- to S-wave corner frequencies as a criterion. We have explored 2430 digital records of the Israeli Seismic Network (ISN) from 456 local events (226 earthquakes, 230 quarry blasts, and a few underwater explosions) of magnitudes Md?=?1.4–3.4, which occurred at distances up to 250 km during 2001–2013 years. P-wave and S-wave displacement spectra were computed for all events following Brune’s source model of earthquakes (1970, 1971) and applying the distance correction coefficients (Shapira and Hofstetter, Teconophysics 217:217–226, 1993; Ataeva G, Shapira A, Hofstetter A, J Seismol 19:389-401, 2015), The corner frequencies and moment magnitudes were determined using multiple stations for each event, and then the comparative analysis was performed.The analysis showed that both P-wave and especially S-wave displacement spectra of quarry blasts demonstrate the corner frequencies lower than those obtained from earthquakes of similar magnitudes. A clear separation between earthquake and explosion populations was obtained for ratios of P- to S-wave corner frequency f ₀(P)/f ₀(S). The ratios were computed for each event with corner frequencies f ₀ of P- and S-wave, which were obtained from the measured f ₀ ^I at individual stations, then corrected for distance and finally averaged. We obtained empirically the average estimation of f ₀(P)/f ₀(S)?=?1.23 for all used earthquakes, and 1.86 for all explosions. We found that the difference in the ratios can be an effective discrimination parameter which does not depend on estimated moment magnitude M _w .The new multi-station Corner Frequency Discriminant (CFD) for earthquakes and explosions in Israel was developed based on ratios P- to S-wave corner frequencies f ₀(P)/f ₀(S), with the empirical threshold value of the ratio for Israel as 1.48.     

Significance of <Emphasis Type="Italic">Vibrio</Emphasis> species in the marine organic carbon cycle—A review

The genus Vibrio, belonging to Gammaproteobacteria of the phylum Proteobacteria, is a genetically and ecologically diverse group of heterotrophic bacteria, that are ubiquitous in marine environments, especially in coastal areas. In particular, vibrios dominate, i.e. up to 10% of the readily culturable marine bacteria in these habitats. The distribution of Vibrio spp. is shaped by various environmental parameters, notably temperature, salinity and dissolved organic carbon. Vibriospp. may utilize a wide range of organic carbon compounds, including chitin (this may be metabolized by most Vibrio spp.), alginic acid and agar. Many Vibrio spp. have very short replication times (as short as ~10 min), which could facilitate them developing into high biomass content albeit for relatively short durations. Although Vibriospp. usually comprise a minor portion (typically ~1% of the total bacterioplankton in coastal waters) of the total microbial population, they have been shown to proliferate explosively in response to various nutrient pulses, e.g., organic nutrients from algae blooms and iron (Fe⁺) from Saharan dust. Thus, Vibrio spp. may exert large impacts on marine organic carbon cycling especially in marginal seas. Genomics and related areas of investigation will reveal more about the molecular components and mechanisms involved in Vibrio-mediated biotransformation and remineralization processes.     

Intermediate-term precursors of large (<Emphasis Type="Italic">M</Emphasis> ≥ 6.6) Kamchatka earthquakes for the period from 1987 to 2004: A retrospective assessment of their information content for prediction

Data from the literature were used to systematize intermediate-term (with advance times of 1 month to ∼2.5 years) precursors to the M ≥ 6.6 Kamchatka earthquakes of 1987–2004. The precursors were observed as changes in seismological, geodetic, geophysical, water-level, and hydrochemical parameters. Retrospective assessment of the information content in these intermediate-term precursors for earthquake prediction is in progress. The focus was on estimating the occurrence times of various precursors as functions of earthquake parameters (magnitude M, hypocentral distance R, and epicenter location). In the conditions of the Kamchatka observing network, precursors can be identified by a combination of methods, mostly before M ∼ 7 earthquakes or greater south of the Kronotskii Peninsula, for which M/logR ≥ 3. It is shown that the relative proportion of earthquakes for which precursors have been identified in the observations considered here is 0.43–0.86.     

Multi-dipole observation system and study on the abnormal variation of the geoelectric field observed at Capital Circle area before the Wen’an <Emphasis Type="Italic">M</Emphasis><Subscript>S</Subscript>5.1 earthquake

On July 4, 2006, a M_S5.1 earthquake occurred in Wen’an county of Hebei Province of which the epicenter is near the Beijing city. The six geoelectric field monitoring stations have been in operation for several years around the Beijing area to examine the relationship between electric field changes and earthquake. This paper firstly explains the principle of the eliminating noise method by using multi-dipole observation system of the geoelectric field. Then the data observed at the stations are studied and a lot of abnormal signals preceding the Wen’an earthquake are selected, of which five abnormal signals of the geoelectric field are finally recognized as the precursory signals. The result shows that ? there probably exists the precursory signals of the geoelectric field preceding the Wen’an earthquake; ? there are sensitive sites in the spatial distribution of the abnormal variation of the geoelectric field before the quack; ? the anomalous signals do not appear synchronously, and their durations are not same at different stations; ? the amplitudes of the abnormal signals recorded at Baodi station are small, but large at Changli station, while the latter is farther from the epicentral area than the former.     

Altitudinal effect of soil <Emphasis Type="Italic">n</Emphasis>-alkane <Emphasis Type="Italic">δ</Emphasis>D values on the eastern Tibetan Plateau and their increasing isotopic fractionation with altitude

Stable isotope paleoaltimetry has provided unprecedented insights into the topographic histories of many of the world’s highest mountain ranges. However, on the Tibetan Plateau (TP), stable isotopes from paleosols generally yield much higher paleoaltitudes than those based on fossils. It is therefore essential when attempting to interpret accurately this region’s paleoaltitudes that the empirical calibrations of local stable isotopes and the relations between them are established. Additionally, it is vital that careful estimations be made when estimate how different isotopes sourced from different areas may have been influenced by different controls. We present here 29 hydrogen isotopic values for leaf wax-derived n-alkanes (i.e., _δD_wax values, and abundance-weighted average δD values of C₂₉ and C₃₁) in surface soils, as well as the δD values of soil water (δD_sw) samples (totaling 22) from Mount Longmen (LM), on the eastern TP (altitude ~0.8–4.0 km above sea level (asl), a region climatically affected by the East Asian Monsoon (EAM). We compared our results with published data from Mount Gongga (GG). In addition, 47 river water samples, 55 spring water samples, and the daily and monthly summer precipitation records (from May to October, 2015) from two precipitation observation stations were collected along the GG transect for δD analysis. LM soil _δD_wax values showed regional differences and responded strongly to altitude, varying from?160‰ to?219‰, with an altitudinal lapse rate (ALR) of?18‰ km^?1 (R ²=0.83; p<0.0001; n=29). These _δD_wax values appeared more enriched than those from the GG transect by ~40‰. We found that both the climate and moisture sources led to the differences observed in soil _δD_wax values between the LM and GG transects. We found that, as a general rule, ε _wax/rw, ε _wax/p and ε _wax/sw values (i.e., the isotopic fractionation of _δD_wax corresponding to δD_rw, δD_p and δD_sw) increased with increasing altitude along both the LM and GG transects (up to 34‰and 50‰, respectively). Basing its research on a comparative study of _δD_wax, δD_p, δD_rw(δD_springw) and δD_sw, this paper discusses the effects of moisture recycling, glacier-fed meltwater, relative humidity (RH), evapotranspiration (ET), vegetation cover, latitude, topography and/or other factors on ε _wax/p values. Clearly, if ε _wax-p values at higher altitudes are calculated using smaller ε _wax-p values from lower altitudes, the calculated paleowaterδD_p values are going to be more depleted than the actual δD values, and any paleoaltitude would therefore be overestimated.     

Plasma pressure distribution in the equatorial plane of the Earth’s magnetosphere at geocentric distances of 6–10<Emphasis Type="Italic">R</Emphasis><Subscript><Emphasis Type="Italic">E</Emphasis></Subscript> according to the international THEMIS mission data

The structure of the averaged plasma pressure distribution in the plasma ring around the Earth at geocentric distances of ∼6–10R _E has been determined. The distribution function moments measured on the international THEMIS mission satellites have been used. The plasma pressure distribution in the equatorial plane at 15R _E > X_SM > −15R _E and 15R _E > Y_SM > −15R _E has been statistically studied. The radial dependence of the plasma pressure at the day-night and morning-evening meridians has been analyzed. It has been indicated that the plasma ring around the Earth has a structure, which is close to being azimuthally symmetric. The achieved results have been compared with the pressure distributions obtained previously. It has been indicated that in the overlapping regions, the achieved results agree with the previously obtained data within the pressure determination errors.     

Textural and geochemical constraints on eruptive style of the 79 <Emphasis Type="SmallCaps">ad</Emphasis> eruption at Vesuvius

The 79 ad Plinian eruption of Vesuvius produced first a white pumice fallout from a high steady eruptive column, and then a grey pumice fallout originating from an oscillatory eruptive column with several partial column collapse events after which there was a total column collapse. This first total collapse was followed by renewed Plinian activity and produced the last grey pumice (GP) fallout deposit of the eruption. Textural characteristics (vesicularity and microcrystallinity) of a complete sequence of the pumice fallout deposits are presented along with the major element compositions and residual volatile contents (H₂O, Cl) to constrain the degassing processes and the eruptive dynamics. Large variations in residual volatile contents exist between the different eruptive units. Textural features also strongly differ between white and grey pumices, but also within the grey pumices. The degassing processes were thus highly heterogeneous. We propose a new model of the 79 ad eruption in which pre-eruptive conditions (H₂O saturation, magma temperature and viscosity) are the critical controls on the diversity of the syn-eruptive degassing processes and hence the eruptive dynamics. Cl contents measured in melt inclusions show that only the white pumice and the upper part of the grey pumice magma were H₂O saturated prior to eruption. The white pumice eruptive units represent a typical closed-system degassing evolution, whereas the first grey pumice one, stored under similar pre-eruptive saturation conditions, follows a particular open-system degassing evolution. We suggest that the oscillatory regime that dominated the grey pumice eruptive phase is linked to pre-eruptive water undersaturation of most of the grey magma, and the associated time delays necessary for H₂O exsolution. We also suggest that the high residual H₂O content of the last grey pumice, deposited after the renewal of Plinian activity following the first total column collapse event, is due to syn-eruptive saturation of GP magma and reduced H₂O exsolution efficiency resulting from speciation of dissolved H₂O in the melt.     

The <Emphasis Type="Italic">M</Emphasis><Subscript><Emphasis Type="Italic">w</Emphasis></Subscript> = 5.8 14 August 2016 middle Sakhalin earthquake on a boundary between Okhotsk and Eurasian (Amurian) plates

An earthquake with the moment magnitude M _w ?=?5.8 occurred in the middle part of the Sakhalin Island, Russian Federation, on 14 August 2016, at 11:17 a.m. UTC. The earthquake source was located west of the Central Sakhalin Fault Zone, which is considered to mark the boundary between the Okhotsk and Eurasian (Amurian) plates. Moment tensor solution of the mainshock as well as the configuration of aftershock cloud suggests that the earthquake was caused by slip on a SW-dipping reverse fault. For the first time for Sakhalin, we have got the felt reports unified in accordance with DYFI. We also analyzed observed PGA values and, based on them, produced shaking maps.