Evolution of Irruputuncu volcano,Central Andes,northern Chile

The Irruputuncu is an active volcano located in northern Chile within the Central Andean Volcanic Zone (CAVZ) and that has produced andesitic to trachy-andesitic magmas over the last ∼258 ± 49 ka. We report petrographical and geochemical data, new geochronological ages and for the first time a detailed geological map representing the eruptive products generated by the Irruputuncu volcano. The detailed study on the volcanic products allows us to establish a temporal evolution of the edifice. We propose that the Irruputuncu volcanic history can be divided in two stages, both dominated by effusive activity: Irruputuncu I and II. The oldest identified products that mark the beginning of Irruputuncu I are small-volume pyroclastic flow deposits generated during an explosive phase that may have been triggered by magma injection as suggested by mingling features in the clasts. This event was followed by generation of large lava flows and the edifice grew until destabilization of its SW flank through the generation of a debris avalanche, which ended Irruputuncu I. New effusive activity generated lavas flows to the NW at the beginning of Irruputuncu II. In the meantime, lava domes that grew in the summit were destabilized, as shown by two well-preserved block-and-ash flow deposits. The first phase of dome collapse, in particular, generated highly mobile pyroclastic flows that propagated up to ∼8 km from their source on gentle slopes as low as 11° in distal areas. The actual activity is characterized by deposition of sulfur and permanent gas emissions, producing a gas plume that reaches 200 m above the crater. The maximum volume of this volcanic system is of ∼4 km³, being one of the smallest active volcano of Central Andes.     

Sustained turbidity currents and their interaction with debrite-related topography; Labuan Island, offshore NW Borneo, Malaysia

The Temburong Fm (Early Miocene), Labuan Island, offshore NW Borneo, was deposited in a lower-slope to proximal basin-floor setting, and provides an opportunity to study the deposits of sustained turbidity currents and their interaction with debrite-related topography. Two main gravity-flow facies are identified; (i) slump-derived debris-flow deposits (debrites) — characterised by ungraded silty mudstones in beds 1.5 to > 60 m thick which are rich in large (> 5 m) lithic clasts; and (ii) turbidity current deposits (turbidites) — characterised by medium-grained sandstone in beds up to 2 m thick, which contain structureless (T_a) intervals alternating with planar-parallel (T_b) and current-ripple (T_c) laminated intervals. Laterally discontinuous, cobble-mantled scours are also locally developed within turbidite beds. Based on these characteristics, these sandstones are interpreted to have been deposited by sustained turbidity currents. The cobble-mantled scours indicate either periods of intense turbidity current waxing or individual flow events. The sustained turbidity currents are interpreted to have been derived from retrogressive collapse of sand-rich mouth bars (breaching) or directly from river effluent (hyperpycnal flow). Analysis of the stratal architecture of the two facies indicates that routing of the turbidity currents was influenced by topographic relief developed at the top of the underlying debrite. In addition, turbidite beds are locally eroded at the base of an overlying debrite, possibly due to clast-related substrate ‘ploughing’ during the latter flow event. This study highlights the difficulty in constraining the origin of sustained turbidity currents in ancient sedimentary sequences. In addition, this study documents the importance large debrites may have in generating topography on submarine slopes and influencing routing of subsequent turbidity currents and the geometry of their associated deposits.     

A medial to distal volcaniclastic record of an andesite stratovolcano: detailed stratigraphy of the ring-plain succession of south-west Taranaki,New Zealand

The >25 ka volcaniclastic ring-plain succession in south-west Taranaki has been remapped to establish a much more detailed understanding of the older stratigraphic record of Mt. Taranaki. Coastal cliff exposures show a range of volcaniclastic lithofacies, including debris-avalanche and lahar deposits, and allow a detailed chronological reconstruction of past volcanic and sedimentary events. Five new debris-avalanche deposits were identified, and their distribution in coastal cross-sections mapped. In addition, four previously described units were renamed and their stratigraphic position and lateral extent redefined. Chronostratigraphic control of the younger (<50 ka) sequence was obtained by radiocarbon dating of wood found within, or peat interbedded with, the deposits. Emplacement ages of the older units were estimated from their stratigraphic position and underlying marine wave-cut surfaces. Overall, at least 14 widespread debris-avalanche deposits occur within the <200 ka ring-plain record of Mt. Taranaki, suggesting one major edifice failure on average every 14,000 years, with an increase in frequency since 40 ka. The stratigraphic reconstruction of the ring-plain succession showed that the same pattern of deposition was repeatedly produced throughout the existence of Mt. Taranaki. Depending on their sedimentological characteristics, the different volcanic and sedimentary lithofacies can be related to phases of edifice-construction or collapse events. Based on the identified cyclic sedimentation pattern, we present a new episodic stratigraphy that integrates existing and new lithostratigraphic units into a coherent chronostratigraphic framework that can be applied to the entire volcanic and volcaniclastic succession at Mt. Taranaki. This model takes into account the complex geological processes that have taken place on the volcano and provides a more uniform stratigraphic terminology that could be applied to repeatedly collapsing stratovolcanoes elsewhere.     

Landscape and sedimentary response to catastrophic debris avalanches, western Taranaki, New Zealand

Catastrophic volcanic debris avalanches reshape volcanic edifices with up to half of pre-collapse cone volumes being removed. Deposition from this debris avalanche deposit often fills and inundates the surrounding landscape and may permanently change the distribution of drainage networks. On the weakly-incised Mt. Taranaki ring-plain, volcanic debris avalanche deposits typically form a large, wedge shape (in plan view), over all flat-lying fans. Following volcanic debris avalanches a period of intense re-sedimentation commonly begins on ring-plain areas, particularly in wet or temperate climates. This is exacerbated by large areas of denuded landscape, ongoing instability in the scarp/source region, damming of river/stream systems, and in some cases inherent instability of the volcanic debris avalanche deposits. In addition, on Mt. Taranaki, the collapse of a segment of the cone by volcanic debris avalanche often generates long periods of renewed volcanism, generating large volumes of juvenile tephra onto unstable and unvegetated slopes, or construction of new domes with associated rock falls and block-and-ash flows. The distal ring-plain impact from these post-debris avalanche conditions and processes is primarily accumulation of long run-out debris flow and hyperconcentrated flow deposits with a variety of lithologies and sedimentary character. Common to these post-debris avalanche units is evidence for high-water-content flows that are typically non-cohesive. Hence sedimentary variations in these units are high in lateral and longitudinal exposure in relation to local topography. The post-collapse deposits flank large-scale fans and hence similar lithological and chronological sequences can form on widely disparate sectors of the ring plain. These deposits on Mt. Taranaki provide a record of landscape response and ring-plain evolution in three stages that divide the currently identified Warea Formation: 1) the deposition of broad fans of material adjacent to the debris avalanche unit; 2) channel formation and erosion of Stage 1 deposits, primarily at the contact between debris avalanche deposits and the Stage 1 deposits and the refilling of these channels; and 3) the development of broad tabular sheet flows on top of the debris avalanche, leaving sediments between debris avalanche mounds. After a volcanic debris avalanche, these processes represent an ever changing and evolving hazard-scape with hazard maps needing to be regularly updated to take account of which stage the sedimentary system is in.     

Sedimentation and welding processes of dilute pyroclastic density currents and fallout during a large-scale silicic eruption, Kikai caldera, Japan

Sedimentation and welding processes of the high temperature dilute pyroclastic density currents and fallout erupted at 7.3 ka from the Kikai caldera are discussed based on the stratigraphy, texture, lithofacies characteristics, and components of the resulting deposits. The welded eruptive deposits, Unit B, were produced during the column collapse phase, following a large plinian eruption and preceding an ignimbrite eruption, and can be divided into two subunits, Units B_l and B_u. Unit B_l is primarily deposited in topographic depressions on proximal islands, and consists of multiple thin (< 1 m) flow units with stratified and cross-stratified facies with various degrees of welding. Each thin unit appears as a single aggradational unit, composed of a lower lithic-rich layer or pod and an upper welded pumice-rich layer. Lithic-rich parts are fines-depleted and are composed of altered country rock, fresh andesite lava, obsidian clasts with chilled margins, and boulders. The overlying Unit B_u shows densely welded stratified facies, composed of alternating lithic-rich and pumice-rich layers. The layers mantle lower units and are sometimes viscously deformed by ballistics. The sedimentary characteristics of Unit B_l such as welded stratified or cross-stratified facies indicate that high temperature dilute pyroclastic density currents were repeatedly generated from limited magma-water interactions. It is thought that dense brittle particles were segregated in a turbulent current and were immediately buried by deposition of hot, lighter pumice-rich particles, and that this process repeated many times. It is also suggested that the depositional temperature of eruptive materials was high and the eruptive style changed from a normal plinian eruption, through surge-generating explosions (Unit B_l), into an agglutinate-dominated fallout eruption (Unit B_u). On the basis of field data, welded pyroclastic surge deposits could be produced only under specific conditions, such as (1) rapid accumulation of pyroclastic particles sufficiently hot to weld instantaneously upon deposition, and (2) elastic particles' interactions with substrate deformation. These physical conditions may be achieved within high temperature and highly energetic pyroclastic density currents produced by large-scale explosive eruptions.     

Volcanic evolution of a long-lived Ordovician island-arc province in the Parkes region of the Lachlan Fold Belt,southeastern Australia

The Ordovician mafic volcanic rocks in the Parkes region of New South Wales occur as three distinct packages of volcaniclastic and coherent volcanic rocks and minor limestone that formed part of an oceanic island arc succession. The oldest package is the Early Ordovician Nelungaloo Volcanics and overlying Yarrimbah Formation. These formations consist of volcanic siltstone, sandstone, polymictic breccia, conglomerate facies interpreted as moderately deep-water turbidites and coarser grained debris-flow deposits emplaced in the medial to distal part of a subaqueous volcaniclastic apron flanking an active volcanic centre(s). Broadly conformable massive to brecciated andesites in the apron deposits are interpreted as synsedimentary sills and/or lava flows. A hiatus in volcanism occurred between the Bendigonian and early Darriwilian (ca 476 – 466 Ma). Deposition of the second package, which produced the Middle to Late Ordovician Goonumbla Volcanics, Billabong Creek Limestone and Gunningbland Formation, commenced with shallow-water limestones and minor volcaniclastic rocks. During an approximately 15 million years period, a thick sequence of bedded volcanic sandstone, limestone and minor siltstone and volcanic breccia were deposited in very shallow to moderate water depths. The top of this package is marked by thick volcanic conglomerate and sandstone mass-flow deposits and approximately coeval basaltic andesite lavas and sills sourced from a nearby volcano. The upper age limit of this package is constrained as approximately 450 Ma by Ea3/4 fossils and monzodiorite that intrudes the Goonumbla Volcanics. The lower limit of the third package, which constitutes the Wombin Volcanics, is poorly constrained and the duration of the hiatus that separates the Goonumbla and Wombin Volcanics is unknown but may be as long as 10 million years. The Wombin Volcanics record development of a thick, proximal volcaniclastic apron flanking a compositionally more evolved volcanic edifice in the immediate Parkes area. Thick crystal-rich turbiditic sandstones of mafic provenance are intercalated with polymictic volcanic breccias and megablock breccias that are interpreted as proximal subaqueous debris-flow and debris-avalanche deposits, respectively. The sequence also includes numerous trachyandesite bodies, many of which were emplaced within the volcaniclastic apron as synsedimentary sills. No evidence was found at Parkes to support the existence of a previously proposed 22 km diameter collapse caldera and the source volcanoes for the Ordovician are envisaged as complex stratovolcanoes.     

Using geochemistry as a tool for correlating proximal andesitic tephra: case studies from Mt Rainier (USA) and Mt Ruapehu (New Zealand)

Volcanic hazards assessments at andesite stratovolcanoes rely on the assessment of frequency and magnitude of past events. The identification and correlation of proximal and distal andesitic tephra, which record the explosive eruptive history, are integral to such assessments. These tephra are potentially valuable stratigraphic marker beds useful to the temporal correlation and age dating of Quaternary volcanic, volcaniclastic and epiclastic sedimentary deposits with which they are interbedded. At Mt Ruapehu (New Zealand) and Mt Rainier (USA), much of the detail of the recent volcanic record remains unresolved because of the difficulty in identifying proximal tephra. This study investigates the value of geochemical methods in discriminating andesitic tephra. Our dataset comprises petrological and geochemical analyses of tephra that span the late Quaternary eruptive record of each volcano. Our data illustrate that andesitic tephra are remarkably heterogeneous in composition. Tephra compositions fluctuate widely over short time intervals, and there are no simple or systematic temporal trends in geochemistry within either eruptive record. This complexity in tephra geochemistry limits the application of geochemical approaches to tephrostratigraphic studies, beyond a general characterisation useful to provenance assignation. Petrological and geochemical data suggest that the products of andesite systems are inherently variable and therefore intractable to discrimination by simple geochemical methods alone. Copyright © 2006 John Wiley & Sons, Ltd.     

Intra- and extra-caldera volcaniclastic facies and geomorphic characteristics of a frequently active mafic island–arc volcano, Ambrym Island, Vanuatu

Ambrym is one of the most voluminous active volcanoes in the Melanesian arc. It consists of a 35 by 50 km island elongated east–west, parallel with an active fissure zone. The central part of Ambrym, about 800 m above sea level, contains a 12 kilometre-wide caldera, with two active intra-caldera cone-complexes, Marum and Benbow. These frequently erupting complexes provide large volumes of tephra (lapilli and ash) to fill the surrounding caldera and create an exceptionally large devegetated plateau “ash plain”, as well as sediment-choked fluvial systems leading outward from the summit caldera. Deposits from fall, subordinate base surge and small-volume pyroclastic (scoria) flows dominate the volcaniclastic sequences in near vent regions. Frequent and high-intensity rainfall results in rapid erosion of freshly deposited tephra, forming small-scale debris flow- and modified grain flow-dominated deposits. Box-shaped channel systems are initially deep and narrow on the upper flanks of the composite cones and are filled bank-to-bank with lapilli-dominated debris flow deposits. These units spill out into larger channel systems forming debris aprons of thousands of overlapping and anastomosing long, narrow lobes of poorly sorted lapilli-dominated deposits. These deposits are typically remobilised by hyperconcentrated flows, debris-rich stream flows and rare debris flows that pass down increasingly shallower and broader box-shaped valleys. Lenses and lags of fines and primary fall deposits occur interbedded between the dominantly tabular hyperconcentrated flow deposits of these reaches. Aeolian sedimentation forms elongated sand dunes flanking the western rim of the ash-plain. Outside the caldera, initially steep-sided immature box-canyons are formed again, conveying dominantly hyperconcentrated flow deposits. These gradually pass into broad channels on lesser gradients in coastal areas and terminate at the coast in the form of prograding fans of ash-dominated deposits. The extra-caldera deposits are typically better sorted and contain other bedding features characteristic of more dilute fluvial flows and transitional hyperconcentrated flows. These outer flank volcaniclastics fill valleys to modify restricted portions of the dominantly constructional landscape (lava flows, and satellite cones) of Ambrym. Apparent maturity of the volcanic system has resulted in the subsidence of the present summit caldera at a similar rate to its infill by volcaniclastic deposits.     

Evaluation of approaches to calculate debris-flow parameters for hazard assessment

Many different runout prediction methods can be applied to estimate the mobility of future debris flows during hazard assessment. The present article reviews the empirical, analytical, simple flow routing and numerical techniques. All these techniques were applied to back-calculate a debris flow, which occurred in 1982 at La Guingueta catchment, in the Eastern Pyrenees. A sensitivity analysis of input parameters was carried out, while special attention was paid to the influence of rheological parameters. We used the Voellmy fluid rheology for our analytical and numerical modelling, since this flow resistance law coincided best with field observations. The simulation results indicated that the “basal” friction coefficients rather affect the runout distance, while the “turbulence” terms mainly influence flow velocity. A comparison of the velocity computed on the fan showed that the analytical model calculated values similar to the numerical ones. The values of our rheological parameters calibrated at La Guingueta agree with data back-calculated for other debris flows. Empirical relationships represent another method to estimate total runout distance. The results confirmed that they contain an important uncertainty and they are strictly valid only for the conditions, which were the basis for their development. With regards to the simple flow routing algorithm, this methods could satisfactorily simulate the total area affected by the 1982 debris flow, but it was not able to directly calculate total runout distance and velocity. Finally, a suggestion on how different runout prediction methods can be applied to generate debris-flow hazard maps is presented. Taking into account the definition of hazard and intensity, the best choice would be to divide the resulting hazard maps into two types: “final hazard maps” and “preliminary hazard maps”. Only the use of numerical models provided final hazard maps, because they could incorporate different event magnitudes and they supplied output-values for intensity calculation. In contrast, empirical relationships and flow routing algorithms, or a combination of both, could be applied to create preliminary hazard maps. The present study only focussed on runout prediction methods. Other necessary tasks to complete the hazard assessment can be looked up in the “Guidelines for landslide susceptibility, hazard and risk zoning” included in this Special Issue.     

泥石流堆积物粒度分布特征影响因素分析及分形维数预测

泥石流堆积物作为泥石流发育最终的产物,含有大量与泥石流发生过程和发育特征相关的信息,能够反映泥石流灾害程度和活动强度。研究表明,泥石流堆积物颗粒具有明显的自相似性和无标度区间,运用分形理论,计算泥石流堆积物颗粒分布的分维数。分析分维数与主沟长度、泥砂补给段长度比、主沟平均比降、流域最大相对高差和松散物源量的关系,结果表明分维数与各因素之间存在较强的非线性响应关系。以乌东德库区泥石流实测数据为例,以上述的5个因素作为输入单元,建立了泥石流堆积物分维数支持向量机预测模型,并对分维数进行了预测,其预测结果的最大误差为1.25%,说明预测值与实测值吻合度较高。综合表明支持向量机预测模型能够较好地模拟和泛化数据,是一种行之有效的泥石流堆积物分形维数预测方法,可用于不具备筛析条件的泥石流堆积物粒度分布特征的预测与研究,进而可为研究泥石流的形成机理、类型、危险度和堆积物的形成演化特征及物理力学性质提供一个新思路。     

Mass flow sedimentology within the HYC Zn–Pb–Ag deposit,Northern Territory,Australia: evidence for syn-sedimentary ore genesis

Laterally continuous mass-flow deposits are an important feature of the HYC stratiform sediment-hosted Zn–Pb–Ag deposit, which reveal more about the HYC mineralising system than has been previously recognised. Mass flow deposits are interbedded with sheet-like mineralised lenses in a carbonaceous dolomitic siltstone host rock. Sedimentological processes of mass-flow deposit emplacement are proposed that constrain stratiform mineralisation to the top metre of the sediment pile, based on mass-flow geometry and detailed clast petrology. Four distinct sedimentary facies are identified within the mass-flow units: framework-supported polymictic boulder breccia; matrix-supported pebble breccia; and gravel-rich and sand-rich graded turbidite beds. The boulder breccias are weakly reverse graded and show rapid lateral transition into the other facies, all of which are distal manifestations of the same sedimentary events. The flow geometry and relationships between these facies are interpreted to reflect mass-flow initiation as clast-rich debris flows, with transformation via the elutriation of fines into a subsequent turbulent flow from which the turbidite and matrix-supported breccia facies were deposited. All the mass-flow facies contain clasts of the common and minor components of the in-situ laminated base-metal mineralised siltstone. Texturally these are identical to their in-situ counterparts, and are clearly distinct from other sulphidic clasts that are of unequivocal replacement origin. In the boulder breccias, intraclasts may be the dominant clast type and the matrix may contain abundant fine-grained sphalerite and pyrite. Dark coloured sphaleritic and pyritic breccia matrices are distinct from pale carbonate-siliclastic matrices, are associated with high abundance of sulphidic clasts, and systematically occupy the lower part of breccia units. Consequently, clasts that resemble in-situ ore facies are confirmed as genuine intraclasts that were incorporated into erosive mass flows prior to complete consolidation. Disaggregation and assimilation of sulphidic sediment in the flow contributed to the sulphide component of the dark breccia matrices. The presence of laminated sulphidic intraclasts in the mass-flow facies constrains mineralisation at HYC to the uppermost part of the seafloor sediment pile, where this material was susceptible to erosion by incoming clast-rich mass flows.Editorial handling: N. White     

The Cerro Morado Andesites: Volcanic history and eruptive styles of a mafic volcanic field from northern Puna, Argentina

The Upper Miocene Cerro Morado Andesites constitutes a mafic volcanic field (100 km²) composed of andesite to basaltic andesite rocks that crop out 75 km to the east from the current arc, in the northern Puna of Argentina. The volcanic field comprises lavas and scoria cones resulting from three different eruptive phases developed without long interruptions between each other. Lavas and pyroclastic rocks are thought to be sourced from the same vents, located where orogen-parallel north-south faults crosscut transverse structures.The first eruptive phase involved the effusion of extensive andesitic flows, and minor Hawaiian-style fountaining which formed subordinate clastogenic lavas. The second phase represents the eruption of slightly less evolved andesite lavas and pyroclastic deposits, only distributed to the north and central sectors of the volcanic field. The third phase represents the discharge of basaltic andesite magmas which occurred as both pyroclastic eruptions and lava effusion from scattered vents distributed throughout the entire volcanic field. The interpreted facies model for scoria cones fits well with products of typical Strombolian-type activity, with minor fountaining episodes to the final stages of eruptions.Petrographic and chemical features suggest that the andesitic units (SiO₂ > 57%) evolved by crystal fractionation. In contrast, characteristics of basaltic andesite rocks are inconsistent with residence in upper-crustal chambers, suggesting that batches of magmas with different origins or evolutive histories arrived at the surface and erupted coevally.Based on the eruptive styles and lack of volcanic quiescence gaps between eruptions, the Cerro Morado Andesites can be classified as a mafic volcanic field constructed from the concurrent activity of several small, probably short-lived, monogenetic centers.     

Volcanic natural dams: identification,stability, and secondary effects

Volcanic activity can enhance several secondary effects, including the formation of one or more natural dams. A common example is from volcanic collapse, where huge mass volumes are rapidly emplaced, obstructing the drainage around a volcano. Their duration depends on the volume of the obstructing mass, inflow rate, and on its textural characteristics. A block facies of a debris avalanche produces durable and permeable dams that consist of decimeter to meter-sized blocks without matrix, whereas a mixed facies is easily eroded after overflowing. Analysis of the sedimentological characteristics of different volcaniclastic deposits that formed natural dams indicate that a mean grain size (Md) equal to −1 phi divides the field of debris avalanche dams (Md < −1 phi) from that formed from other types of volcanic deposits. In addition, the matrix proportion of dams formed by debris avalanches are less than the 50% and the percentage of mud fraction is highly variable, up to 30%. Combining the granulometric textures with duration time of the dam shows no clear relation. Dam durability is probably more dependent on the volume of the lake and the inflow rate. Only in some cases, as mud fraction increases is the blockage also less durable because the lower permeability favors rapid infilling. The texture of the dam also determines the types of secondary flows that originate by their breakdown. These vary from cohesive debris flow to hyperconcentrated flow, representing different hazards due to their magnitude and their different behavior downstream.     

Late Holocene coseismic uplift on the Hua-tung coast, eastern Taiwan: Evidence from mass mortality of intertidal organisms

The evidence of coseismic uplift on the dynamic, wave-dominated Hua-tung coast fringing the active Coastal Range (eastern Taiwan) has been equivocal, due to complex controls by wave and terrestrial sediment over morphological and ecological systems of the coast. This study, by applying radiocarbon dating methods, demonstrates coseismic-uplift nature of the coast by finding synchronously killed intertidal organisms (mostly boring shell Jouannetia sp.) stranded at different sites of the coast with distinct physiographic characters. Based on these data, together with evidence from wave-cut notch sequences, two coseismic-uplift systems are recognized. One centers around the northern-middle part of the coast and yields events with uplift amounts of maximal 3–6 m and an average recurrence interval of at least several hundred years. The most recent activity of this system, influencing at least 70 km of coast, occurred at ~ 0.9 ka. The earthquake generating this event also triggered extensive landslides/debris flows in the region. Another system, exemplified by the uplift associated with the 2003 Cheng-kung earthquake, centers on the southern part of the coast and yields uplift of likely < 1 m every < 0.2 ky. Two pre-historic events of this system are identified as occurring at ~ 0.7 ka and ~ 1.1 ka. These two coseismic-uplift systems are consistent in position with two anticlinal structures defined by long-term uplift of the coast. However, the areas subjected to maximal coseismic uplift are located off where the climaxes of long-term uplift occur, implying that the latter areas have been uplifted mainly by aseismic and/or relatively frequent/small-magnitude coseismic motion.     

L'ı̂le de la Dominique, à l'origine des avalanches de débris les plus volumineuses de l'arc des Petites AntillesThe Island of Dominica,site for the generation of the most voluminous debris avalanches in the Lesser Antilles Arc

Results from recent fieldwork and the Aguadomar marine survey in the Lesser Antilles clearly indicate that the volcanic field of southern Dominica has experienced three major edifice collapse events. This led to formation of the most voluminous debris avalanches known in the Caribbean Arc. Submarine hummocky morphology with plurikilometric megablocks is characteristic of debris avalanche deposits. We propose that steep slopes on the western Caribbean side of the island and intense hydrothermal alteration lead to recurrent large-scale edifice collapses. Therefore islands in the Lesser Antilles face a non-negligible risk from generation of tsunamis associated with potential future edifice collapse. To cite this article: A. Le Friant et al., C. R. Geoscience 334 (2002) 235–243.     

Hydrothermal alteration in andesitic volcanoes: Trace element redistribution in active and ancient hydrothermal systems of Guadeloupe (Lesser Antilles)

The mineralogy and the trace element compositions of hydrothermally-altered volcanic materials collected from ash fall deposits and in four debris-avalanche deposits (DADs) at La Soufrière volcano in Guadeloupe have been determined. Phreatic explosions of the 1976 eruption and flank collapse events have sampled various parts of the active and ancient hydrothermal systems of the volcano. Hydrothermal mineral assemblages (smectite + silica polymorphs ± pyrite/jarosite ± gypsum) are typical of rock alteration by low-temperature acid-sulphate fluids. High-temperature mineral assemblages are rare, indicating that phreatic explosions and flank collapse events have sampled mainly the upper parts of the volcanic edifice.Andesitic eruptive products affected by shallow hydrothermal alteration are complex assemblages of volcanic materials (glass, phenocrysts and xenocrysts with complex magmatic histories) of different ages and compositions. The use of incompatible element ratios and REE compositions normalised to an unaltered reference material overcomes the interpretation difficulties related to mass balance effects of alteration processes and the petrologic heterogeneity of the initial material.REE and other incompatible elements (Th, U, Hf, Zr) are mainly concentrated in the glassy matrix of unaltered andesitic rocks. Secondary S-bearing mineral phases (e.g., gypsum, jarosite) that have precipitated from acid-sulphate fluids do not contain substantial incompatible elements (REE, U, Th, Hf, Zr). Compositional variations of incompatible elements in hydrothermally-altered andesitic materials reflect mainly volcanic glass–smectite transformation, which is characterised by (i) strong depletion of alkalis and alkaline earths (Ba, Sr) and first transition series elements (Zn, Cu, Cr, Co, Ni), (ii) immobility of highly incompatible elements (Th, Zr, Hf, LREE) and (iii) strong depletion of MREE and HREE. The sigmoid shape of normalised REE pattern is characteristic of glass–smectite transformation by low-temperature acid-sulphate fluids. This transformation also produces significant variations in U/Th values, which offer the opportunity to date the cessation of hydrothermal alteration and to reconstruct the evolution in space and time of hydrothermal activity in a volcanic edifice.     

陕西陈家坝变质火山体系

陈家坝变质火山体系位于太古代扬子陆壳西北边部康略勉初始裂谷，是在裂谷纪大陆拉张后期所生成的一个浅海海底中－酸性火山体系，它包括同源成串的裂隙式火山机构、火山塌陷构造和塌陷被动侵位的岩塞。火山机构的五次喷发堵塞阶段与刘家沟组凝灰岩系的五个喷发沉积阶段，岩段之间有着明显的成因对应关系，原岩属于陆壳来源型的富镁安山岩－英安岩－流纹岩组合。在较厚的近火山灰锥锥坡海底洼地相的角斑质火山尘凝灰岩层中，夹有含金     

A re-examination of the mechanism and human impact of catastrophic mass flows originating on Nevado Huascarán, Cordillera Blanca, Peru in 1962 and 1970

The 1962 and 1970 Huascarán mass movements, originated as rock/ice falls from the mountain's North Peak, transformed into higher-volume high-velocity mud-rich debris flows by incorporation of snow from the surface of a glacier below Huascarán and the substantial entrainment of morainic and colluvial material from slopes below the glacier terminus. Water for fluidization of the entrained material originated in the melting of incorporated snow and the liberation of soil moisture contained within the entrained materials. Eyewitness reports indicate very high mean velocities for the events; 17–35 m/s (1962) and 50–85 m/s (1970). The runout distances and velocity profiles of both events were simulated using DAN/W. Both mass movements continued downstream in the Rio Santa as debris floods (aluviones) that in 1970 reached the Pacific at a distance of 180 km. In strong contrast to publications in the geosciences literature, 1961 Peru Census data indicates that the death toll of the 1970 event is ca. 6000 and that total life loss in the two events did not exceed 7000 people.     

Field observations of the June 30, 2001 debris flow at Acquabona (Dolomites, Italy)

On June 30, 2001, a debris flow occurred in the Acquabona Creek, a small catchment of the Eastern Dolomites, Italy. This debris flow originated shortly after an intense rainstorm, characterised by a peak intensity of 8.6 mm per 10 min; it transported a total volume of 30,000 m³, consisting of poorly sorted gravely sand with boulders up to 3 m in diameter. The sediment erosion yield rate reached as high as 20 m³/m. In order to verify the accuracy of the field measurements, the total volume of debris deposits have was calculated using three different topographic measurement techniques: 3D laser scanning, terrestrial stereo-photogrammetry survey and total topographic station survey. Data collected so far show that no debris flow has occurred at Acquabona with a rainfall intensity lower than 4.6 mm per 10 min. Channel cross section measurements indicate that debris flow velocity ranges from 2.0 to 7.2 m/s along the lower flow channel and peak discharge ranges between 22 and 300 m³/s. Field estimates of the rheological properties indicate a yield strength ranging from 2,088 to 5,313 Pa and Bingham viscosity between 70 and 337 Pa · s. It is not still possible to identify a rainfall intensity and amount threshold for debris flow triggering, but the data so far collected emphasise that debris flows do not occur with a rainfall intensity lower than 4.6 mm per 10 min.     

A 90,000-year tephrostratigraphic framework of Aso Volcano, Japan

A detailed 90,000-year tephrostratigraphic framework of Aso Volcano, southwestern Japan, has been constructed to understand the post-caldera eruptive history of the volcano. Post-caldera central cones were initiated soon after the last caldera-forming pyroclastic-flow eruption (90 ka), and have produced voluminous tephra and lava flows. The tephrostratigraphic sequence preserved above the caldera-forming stage deposits reaches a total thickness of 100 m near the eastern caldera rim. The sequence is composed mainly of mafic scoria-fall and ash-fall deposits but 36 silicic pumice-fall deposits are very useful key beds for correlation of the stratigraphic sequence. Explosive, silicic pumice-fall deposits that fell far beyond the caldera have occurred at intervals of about 2500 years in the post-caldera activity. Three pumice-fall deposits could be correlated with lava flows or an edifice in the western part of the central cones, although the other silicic tephra beds were erupted at unknown vents, which are probably buried by the younger products from the present central cones. Most of silicic eruptions produced deposits smaller than 0.1 km³, but bulk volumes of two silicic eruptions producing the Nojiri pumice (84 ka) and Kusasenrigahama pumice (Kpfa; 30 ka) were on the order of 1 km³ (VEI 5). The largest pyroclastic eruption occurred at the Kusasenrigahama crater about 30 ka. This catastrophic eruption began with a dacitic lava flow and thereafter produced Kpfa (2.2 km³). Total tephra volume in the past 90,000 years is estimated at about 18.1 km³ (dense rock equivalent: DRE), whereas total volume for edifices of the post-caldera central cones is calculated at about 112 km³, which is six times greater than the former. Therefore, the average magma discharge rate during the post-caldera stage of Aso Volcano is estimated at about 1.5 km³/ky, which is similar to the rates of other Quaternary volcanoes in Japan.