Compton polarimeter as a focal plane detector for hard X-ray telescope: sensitivity estimation with Geant4 simulations

X-ray polarimetry can be an important tool for investigating various physical processes as well as their geometries at the celestial X-ray sources. However, X-ray polarimetry has not progressed much compared to the spectroscopy, timing and imaging mainly due to the extremely photon-hungry nature of X-ray polarimetry leading to severely limited sensitivity of X-ray polarimeters. The great improvement in sensitivity in spectroscopy and imaging was possible due to focusing X-ray optics which is effective only at the soft X-ray energy range. Similar improvement in sensitivity of polarisation measurement at soft X-ray range is expected in near future with the advent of GEM based photoelectric polarimeters. However, at energies >10 keV, even spectroscopic and imaging sensitivities of X-ray detector are limited due to lack of focusing optics. Thus hard X-ray polarimetry so far has been largely unexplored area. On the other hand, typically the polarisation degree is expected to increase at higher energies as the radiation from non-thermal processes is dominant fraction. So polarisation measurement in hard X-ray can yield significant insights into such processes. With the recent availability of hard X-ray optics (e.g. with upcoming NuSTAR, Astro-H missions) which can focus X-rays from 5 KeV to 80 KeV, sensitivity of X-ray detectors in hard X-ray range is expected to improve significantly. In this context we explore feasibility of a focal plane hard X-ray polarimeter based on Compton scattering having a thin plastic scatterer surrounded by cylindrical array scintillator detectors. We have carried out detailed Geant4 simulation to estimate the modulation factor for 100 % polarized beam as well as polarimetric efficiency of this configuration. We have also validated these results with a semi-analytical approach. Here we present the initial results of polarisation sensitivities of such focal plane Compton polarimeter coupled with the reflection efficiency of present era hard X-ray optics.     

Geant4 simulations of soft proton scattering in X-ray optics

Low energy protons (< 300 keV) can enter the field of view of X-ray telescopes, scatter on their mirror surfaces at small incident angles, and deposit energy on the detector. This phenomenon can cause intense background flares at the focal plane decreasing the mission observing time (e.g. the XMM-Newton mission) or in the most extreme cases, damaging the X-ray detector. A correct modelization of the physics process responsible for the grazing angle scattering processes is mandatory to evaluate the impact of such events on the performance (e.g. observation time, sensitivity) of future X-ray telescopes as the ESA ATHENA mission. The Remizovich model describes particles reflected by solids at glancing angles in terms of the Boltzmann transport equation using the diffuse approximation and the model of continuous slowing down in energy. For the first time this solution, in the approximation of no energy losses, is implemented, verified, and qualitatively validated on top of the Geant4 release 10.2, with the possibility to add a constant energy loss to each interaction. This implementation is verified by comparing the simulated proton distribution to both the theoretical probability distribution and with independent ray-tracing simulations. Both the new scattering physics and the Coulomb scattering already built in the official Geant4 distribution are used to reproduce the latest experimental results on grazing angle proton scattering. At 250 keV multiple scattering delivers large proton angles and it is not consistent with the observation. Among the tested models, the single scattering seems to better reproduce the scattering efficiency at the three energies but energy loss obtained at small scattering angles is significantly lower than the experimental values. In general, the energy losses obtained in the experiment are higher than what obtained by the simulation. The experimental data are not completely representative of the soft proton scattering experienced by current X-ray telescopes because of the lack of measurements at low energies (< 200 keV) and small reflection angles, so we are not able to address any of the tested models as the one that can certainly reproduce the scattering behavior of low energy protons expected for the ATHENA mission. We can, however, discard multiple scattering as the model able to reproduce soft proton funnelling, and affirm that Coulomb single scattering can represent, until further measurements at lower energies are available, the best approximation of the proton scattered angular distribution at the exit of X-ray optics.     

A novel wide-field hard x-ray telescope

We discuss a hard x-ray telescope for the range 25–70 keV based on a one-dimensional lobster-eye telescope and x-ray supermirror coatings. This approach enables wide field-of-view imaging. A telescope suitable for a large balloon payload, with a 50×100 cm frontal area, could have an effective area of 50–100 cm² and a 10⁰×10⁰ field of view, and thereby detect AGN that are 0.5 milliCrab in the soft x-rays in a 10⁴ second exposure. 29% of the sky could be surveyed to this limit in a 2-week balloon flight, reaching 6 times fainter than the HEAO A-4 all-sky survey.     

A glancing incidence solar telescope for the soft x-ray region

This paper describes the instrumentation of an Aerobee rocket (NASA 4.95 GS) which was launched from White Sands Missile Range on May 20th 1966, to observe the Sun in the soft X-ray region. The experiment package, which was pointed at the sun by a control system stabilized about all three axes, carried two Wolter type I glancing incidence telescopes to photograph the sun in wavelength regions (determined by bandpass filters) between 3 and 75 Å, and two proportional counters to obtain flux data and rough spectral shapes in the regions 2–11 Å and 8–20 Å. The spatial resolution obtained was about 20 arc seconds. Limb brightening and polar darkening are very pronounced at the longer wavelengths. A tuft of emission was observed at the North Pole in addition to an arch-like structure on the NW limb. Several of the photographs are presented, and some preliminary results are discussed.     

Validation of Geant4 10.3 simulation of proton interaction for space radiation effects

Monte Carlo simulation of space radiation effects induced by protons is important for design of space missions. Geant4 is a well established toolkit for Monte Carlo simulation focused on high energy physics applications. In this work, a set of new validation results versus data for Geant4 electromagnetic and hadronic interaction of protons is presented and discussed. Optimal configuration of Geant4 physics for space applications is proposed.     

Calibrating a physical model based on Geant4 to calculate cosmogenic nuclide production rates on lunar surface

A physical model based on the open‐source toolkit Geant4 for production rates of cosmogenic nuclei on the lunar surface is proposed and calibrated. The fluxes of proton and neutron beneath the lunar surface are obtained by simulating the physical processes between the cosmic‐ray particles and the lunar surface material. By combining the experimental proton cross sections and the a posteriori neutron cross sections, we calculate the production rate depth profiles of long‐lived nuclei (¹⁰Be, ¹⁴C, ²⁶Al, ³⁶Cl, and ⁵³Mn). Through comparing experimental and theoretical data for these nuclei, we find that for all the selected nuclei, experimental and theoretical production rate depth profiles agree well with each other by introducing a single normalization factor. It means that the physical model based on Geant4 can also reproduce the depth profiles of cosmogenic nuclei, and that this model can be used by everyone worldwide. In addition, we predict the production rates of three stable nuclei (²¹Ne, ²²Ne, and ³⁸Ar).     

Calculation of the Cherenkov light yield from electromagnetic cascades in ice with Geant4

In this work we investigate and parameterize the amount and angular distribution of Cherenkov photons which are generated by electro-magnetic cascades in water or ice. We simulate electromagnetic cascades with Geant4 for primary electrons, positrons and photons with energies ranging from 1 GeV to 10 TeV. We parameterize the total Cherenkov-light yield as a function of energy, the longitudinal evolution of the Cherenkov emission along the cascade-axis and the angular distribution of photons. Furthermore, we investigate the fluctuations of the total light yield, the fluctuations in azimuth and changes of the emission with increasing age of the cascade.     

Cost-effective infrastructure in a multi-antenna telescope layout

The future Square Kilometre Array (SKA) radio telescope is an interferometer array that will use a variety of collector types, including approximately 2500 dishes distributed with separations up to a few thousand kilometres, and about 250 aperture array (AA) stations located within 200 km of the core. The data rates associated with each individual collector are vast: around 10 GBytes/s for each dish and 2 TBytes/s for an AA station. As each of these must be connected directly to a central correlator, designing a cost-effective cabling and trenching infrastructure presents a great engineering challenge. In this paper we discuss approaches to performing this optimisation. In graph theory, the concept of a minimum spanning tree (MST) is equivalent to finding the minimum total trench length joining a set of n arbitrary points in the plane. We have developed a set of algorithms which optimise the infrastructure of any given telescope layout iteratively, taking into consideration not only trenching but also cabling and jointing costs as well. Solutions for few example configurations of telescope layout are presented. We have found that these solutions depend significantly on the collectors’ output data rates. When compared to a “traditional” MST-based approach which minimises trenching costs only, our algorithms can further reduce total costs by up to 15–20%. This can influence greatly the SKA infrastructure related costs.     

The instrumental polarization of a Gregory-Coudé telescope

We calculate a theoretical model of the polarization properties of a Gregory-Coudé telescope to predict the behaviour of the German Gregory-Coudé Telescope installed at the Observatorio del Teide (Spain). Measurements of the real effects produced by this telescope acting upon light of known polarization are compared with the model. We estimate an uncertainty in its predictions of about 10%, which is produced by the uncertainties of the (complex) refractive index of the metallic layers covering the mirrors. The paper concludes by briefly considering the way in which the plain telescope changes the Stokes' profiles.     

Precision sidereal tracking system for a telescope

For the opportunities of CCD observations to be pursued, we have produced a precision system for telescope sidereal tracking. Using the software and hardware complex, one can control the system both autonomously and via a personal computer.     

Simulations of Galactic Cosmic Ray impacts onto the Herschel/PACS photoconductor arrays with Geant4 code

We present results of simulations performed with the Geant4 software code of the effects of Galactic Cosmic Ray impacts on the photoconductor arrays of the PACS instrument. This instrument is part of the ESA-Herschel payload, which will be launched in 2008 and will operate at the Lagrangian L2 point of the Sun-Earth system. Both the Satellite plus the cryostat (the shield) and the detector act as source of secondary events, affecting the detector performance. Secondary event rates originated within the detector and from the shield are of comparable intensity. The impacts deposit energy on each photoconductor pixel but do not affect the behaviour of nearby pixels. These latter are hit with a probability always lower than 7%. The energy deposited produces a spike which can be hundreds times larger than the noise. We then compare our simulations with proton irradiation tests carried out for one of the detector modules and follow the detector behaviour under ‘real’ conditions.     

Numerical simulations of ther 1/4 law

We simulate the evolution of a system of points in a given potential. With a density distribution proportional to r^–n , and a logarithmic potential we obtain a stationary state following ther ^1/4 law of de Vaucouleurs. If we follow this simulation to the Galaxy and to M31, we findn=–4 for the Galaxy andn=–3 for M31.Paper presented at the 11th European Regional Astronomical Meetings of the IAU on New Windows to the Universe, held 3–8 July, 1989, Tenerife, Canary Islands, Spain.     

Simulations of galactic cosmic ray impacts on the Herschel/PACS bolometer arrays with Geant4 code

The effects of the in-flight behaviour of the bolometer arrays of the Herschel/Photo-conductor Array Camera and Spectrometer (PACS) instrument under impacts of Galactic cosmic rays are explored. This instrument is part of the ESA-Herschel payload, which will be launched at the end of 2008 and will operate at the Lagrangian L2 point of the Sun-Earth system. We find that the components external to the detectors (the spacecraft, the cryostat, the PACS box, collectively referred to as the ‘shield’) are the major source of secondary events affecting the detector behaviour. The impacts deposit energy on the bolometer chips and influence the behaviour of nearby pixels. 25% of hits affect the adjacent pixels. The energy deposited raises the bolometer temperature by a factor ranging from 1 to 6 percent of the nominal value. We discuss the effects on the observations and compare simulations with laboratory tests.     

Exact optics: a unification of optical telescope design

A strong emission line at 2.8935 μm discovered by Rubin et al. in an ISO SWS02 spectrum of the Orion Nebula is identified as the     multiplet of O  i . Line formation is due to de-excitation cascades following UV-pumping of high ³S^o and ³D^o terms and occurs in the O  i zone immediately behind the hydrogen ionization front. This cascade mechanism also accounts for permitted O  i triplet lines in the optical spectrum of the Nebula, as shown by Grandi. An escape probability treatment of the O  i cascades accounts for the strength of the λ 2.89-μm line and suggests interesting diagnostic possibilities for the optical lines.     

Thermal characteristics of a classical solar telescope primary mirror

We present a detailed thermal and structural analysis of a 2 m class solar telescope mirror which is subjected to a varying heat load at an observatory site. A 3-dimensional heat transfer model of the mirror takes into account the heating caused by a smooth and gradual increase of the solar flux during the day-time observations and cooling resulting from the exponentially decaying ambient temperature at night. The thermal and structural response of two competing materials for optical telescopes, namely Silicon Carbide – best known for excellent heat conductivity and Zerodur – preferred for its extremely low coefficient of thermal expansion, is investigated in detail. The insight gained from these simulations will provide a valuable input for devising an efficient and stable thermal control system for the primary mirror.     

Active sub-reflector research for a large radio telescope

This paper proposes an active sub-reflector suitable for large radio telescopes, which can compensate both of the deformation of the main reflector and sub-reflector position offsets. The mathematical formula of the main reflector deformation compensated by the sub-reflector is deduced based on Cassegrain and Gregory antenna structures. The position of the sub-reflector is adjustable to compensate for defocusing errors on high and low elevations, which are mainly caused by the deformation of the sub-reflector supporting legs. In this paper, the method of obtaining the optimum position of the sub-reflector from the aperture phase by the interferometric method is introduced. The actual measurement is verified on the Tianma 65 m radio telescope, which provides a new way to diagnose the position error of the sub-reflector.     

The origin of wide-angle tailed radio galaxies

To investigate the origins of wide-angle tailed radio sources (WATs), we have compiled a sample of these systems in Abell clusters for which X-ray data exist. Contrary to conventional wisdom, the WATs are found to be significantly displaced from the X-ray centroids of their host clusters. The bends in the radio jets of WATs are found to be oriented preferentially such that they point directly away from or toward the cluster centre, with more of the former than the latter. If this morphology is attributed to ram pressure, then the WATs are on primarily radial orbits, with more approaching the X-ray centroid than receding. There is also some evidence that the incoming WATs are on average further from the X-ray centroid than the outgoing ones. All of these observations strongly support a scenario in which WATs are created in cluster mergers.     

Observations of limb flares with a soft X-ray telescope

The structure and evolution of 26 limb flares have been observed with a soft X-ray telescope flown on Skylab. The results are:

1. One or more well defined loops were the only structures of flare intensity observed during the rise phase and near flare maximum, except for knots which were close to the resolution of the telescope in size (≈2 arc seconds) and whose structure can therefore not be determined.
2. The flare core features were always sharply defined during the rise phase.
3. For the twenty events which contain loops, the geometry of the structure near maximum was that of a loop in ten cases, a loop with a spike at the top in four cases, a cusp or triangle in four cases, and a cusp combined with a spike in another two cases.
4. Of the fifteen cases in which sufficient data were available to allow us to follow a flare's evolution, five showed no significant geometrical deviation from a loop structure, one displayed little change except for a small scale short-lived perturbation on one side of the loop 10 seconds before a type III radio burst was observed, eight underwent a large scale deformation of the loop or loops on a time scale comparable to that of the flare itself and one double loop event changed in a complex and undetermined manner, with reconnection being one possibility.

Based on observation of the original film, it is suggested that the eight flares which underwent large scale deformations had become unstable to MHD kinks. This implies that these flares occurred in magnetic flux tubes through which significant currents were flowing. It is suggested that the high energy electrons responsible for type III bursts accompanying these flares could have been accelerated by the V x B electric field induced by a small scale short-lived perturbation of parts of a flaring flux tube, similar to the one perturbation which was observed having these characteristics.     

Super earth explorer: a coronagraphic off-axis space telescope

The Super-Earth Explorer is an Off-Axis Space Telescope (SEE-COAST) designed for high contrast imaging. Its scientific objective is to make the physico-chemical characterization of exoplanets possibly down to 2 Earth radii. For that purpose it will analyze the spectral and polarimetric properties of the parent starlight reflected by the planets, in the wavelength range 400–1,250 nm.