Temporal evolution of lead isotope ratios in sediments of the Central Portuguese Margin: A fingerprint of human activities

Stable Pb isotope ratios (²⁰⁶Pb/²⁰⁷Pb, ²⁰⁸Pb/²⁰⁶Pb), ²¹⁰Pb, Pb, Al, Ca, Fe, Mn and Si concentrations were measured in 7 sediment cores from the west coast of the Iberian Peninsula to assess the Pb contamination throughout the last 200 years. Independently of their locations, all cores are characterized by increasing Pb/Al rends not related to grain-size changes. Conversely, decreasing trends of ²⁰⁶Pb/²⁰⁷Pb were found towards the present. This tendency suggest a change in Pb sources reflecting an increased proportion derived from anthropogenic activities. The highest anthropogenic Pb inventories for sediments younger than 1950s were found in the two shallowest cores of Cascais and Lisboa submarine canyons, reflecting the proximity of the Tagus estuary. Lead isotope signatures also help demonstrate that sediments contaminated with Pb are not constrained to estuarine–coastal areas and upper parts of submarine canyons, but are also to transferred to a lesser extent to deeper parts of the Portuguese Margin.     

Sedimentary processes in the inner New York Bight: Evidence from excess210Pb and239,240Pu

Particle-reactive radionuclides were determined in sediments from the inner New York Bight to trace transport and storage of fine-grained sediments and associated reactive materials. Seven sediment ? cores 20–50 cm in length were analyzed for water content, loss on ignition (LOI) and excess²¹⁰Pb; three of these were also analyzed for^239,240Pu. Excepting some depth horizons in a core from a dredge-spoil dumpsite, every sample analyzed contained excess²¹⁰Pb. Variations in the concentration of excess²¹⁰Pb with depth in the sediment at all stations correlated strongly with LOI, which apparently traces that fraction of the sediment which is active in removing reactive elements from the water column. In the cores analyzed for^239,240Pu, every sample contained finite Pu, and Pu concentrations correlated strongly with excess²¹⁰Pb.The radionuclide distributions may be simply viewed as products of steady-state sediment accumulation or of mixing. Geochemically reasonable accumulation rates are very high (0.5–2.6 g/cm² y) and could probably only be sustained by offshore transport of dumped materials. At the other extreme the relationships between excess²¹⁰Pb and LOI are compatible with rapid mixing of a²¹⁰Pb carrier phase (traced by LOI) into the pre-existing substrate with little or no actual accumulation. Other non-steady-state processes, such as sediment gravity flow, could also explain the observed distributions.Measured sediment inventories (dpm/cm²) of excess²¹⁰Pb and Pu at these stations are greatly in excess of those supportable by direct atmospheric deposition: lateral supply is required. Incorporation of sedimentary fines into the sand substrate could make the inner New York Bight an important repository of reactive materials.     

Historical fluxes of metal and metalloids in an aquatic ecosystem affected by land-use change and mining activities in northwestern Mexico

Freshwater reservoirs are essential owing because of their ecological, economic, and social importance. They are particularly vulnerable to contamination, as of metal and metalloids, derived from anthropogenic activities like mining. The temporal variations in trace element concentrations (arsenic (As), mercury (Hg), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn)), enrichment, fluxes, and possible sources were evaluated by studying two sediment cores from the La Angostura (ANG) Reservoir (northwest Mexico), using ²¹⁰Pb geochronology. The enrichment factors showed from null to minor enrichment for most elements, but moderate to severe enrichment of mercury (Hg). Most trace element concentrations had a detrital origin, and notable Hg concentration increases since the past decade were associated with severe drought periods, likely resulting from wildfires. The observed sediment concentrations of As and Hg can cause adverse effects on biota in the ecosystem since they are above the probable effect level (PEL). Development of strategies for metal attenuation in this reservoir is recommended and metals should be controlled until specific ecotoxicological studies are performed.     

The spatial and temporal distribution of heavy metals in sediments of Victoria Harbour,Hong Kong

Victoria Harbour has received substantial loadings of pollutants from industrial and municipal wastewater discharged since the 1950s. Inputs of contaminants have declined dramatically during the last two decades as a result of better controls at the source and improved wastewater treatment facilities. To assess the spatial and temporal changes of metal contaminants in sediments in Victoria Harbour, core and grab sediments were collected. The central harbour areas were generally contaminated with heavy metals. The spatial distribution of trace metals can probably be attributed to the proximity of major urban and industrial discharge points, and to the effect of tidal flushing in the harbour. In the sediment cores, the highest concentrations of trace metals were observed to have accumulated during the 1950s–1980s, corresponding with the period of rapid urban and industrial development in Hong Kong. From the late 1980s, there has been a major decline in the concentrations of trace metals, due to a reduction in industrial activities and to the enactment of wastewater pollution controls in the territory. The Pb isotopic compositions of the sediments revealed the anthropogenic inputs of Pb to the harbour. The ²⁰⁶Pb/²⁰⁷Pb ratios varied from 1.154 to 1.190, which were lower than those of background geological materials in Hong Kong (²⁰⁶Pb/²⁰⁷Pb: 1.201–1.279). The data also indicated that the Pb in the harbour sediments most likely originated from mixed sources, including the leaded gasoline used in the past and other anthropogenic sources.     

Anthropogenic lead concentrations and sources in Baltic Sea sediments based on lead isotopic composition

The Gulf of Gdańsk is influenced by heavy metals of anthropogenic origin. In this study, temporal concentration changes of Pb, Zn, Cd, and Cu were studied in six, 50 cm long sediment cores. The main aim of the study was to concentrate on the history of Pb fluxes and Pb isotopic composition (²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁶Pb) to trace Pb sources. The lowest Pb concentrations (19 μg g⁻¹) were measured in sediments deposited circa 1860, while the highest Pb concentrations (63–147 μg g⁻¹) were measured in sediments deposited between 1960s and 70s. Pre-industrial Pb fluxes were 7 Pb m² year⁻¹, while after WWII they reached 199 Pb m² year⁻¹. Highest ²⁰⁶Pb/²⁰⁷Pb ratios (∼1.22) were measured in the oldest sediment layers, and the lowest ²⁰⁶Pb/²⁰⁷Pb ratios (∼1.165) were measured in the sediments deposited in 1970s–90s. During the period of highest Pb contamination, the anthropogenic Pb fraction reached up to 93%. A general discussion of the Pb sources, emissions, and loads for Poland is included.     

Flocculation and the loss of sediment from the Po River plume

In October 2000, a 100-year flood event in the Po River resulted in the formation of a fine-grained sediment deposit extending up to 10 km from the river mouth. Soon after this event, and for a subsequent period of 2 years, box cores were collected on a grid of stations off of the Po Delta to observe the evolution of the flood deposit. Using a process-based parameterization of the disaggregated inorganic grain size distribution, the evolution of the surficial sediment on the Po shelf since the 2000 flood has been interpreted in the context of particle flocculation dynamics. This method produces estimates of floc limit, the diameter at which the flux of single grains to the seabed equals the flux of flocs, and floc mass fraction, the amount of material deposited as flocs. Floc limit depends on the extent of flocculation in suspension, and floc mass fraction describes the extent of flocculation in the sediment. Immediately after the flood, these two parameters were high at stations located beneath the path of the flood plume as observed in satellite images. The occurrence of a highly flocculated deposit below the path of the plume leads to two hypotheses: (1) the high sediment concentration in the river flood plume produced extensive sediment flocculation in the plume and (2) post-depositional remobilization of sediment delivered from the plume to the seabed was limited in the relatively low-energy environment of the Po prodelta. Floc limit and floc mass fraction estimated from bottom sediment sampling 3 and 10 months after the initial sampling were lower, indicating that during normal discharge, flocculated fine-grained sediment from the Po River settles close to the mouth, leaving only a small amount of material in suspension in the plume for direct deposition onto the prodelta. These findings are consistent with laboratory studies of suspended sediment that show that sediment concentration and turbulent energy exert dominant control on the extent of flocculation and the loss of sediment from suspension.     

Radioactivity in sediments of the Great Lakes: Post-depositional redistribution by deposit-feeding organisms

At two locations in southern Lake Huron (U.S.A.), twelve 35.5-cm diameter cores of fine-grained sediments were taken for comparison of the vertical distributions of²¹⁰Pb and falllout¹³⁷Cs with the distributions of benthic macroinvertebrates, mainly oligochaete worms (Tubificidae) and the amphipod,Pontoporeia affinis. Locations were selected on the basis of²¹⁰Pb distributions measured a year earlier which indicated contrasting depths of mixing of surface sediments. At one location the activity of²¹⁰Pb is uniform down to about 6 cm and 95% of total invertebrates occur within this zone; at the other location the zone of constant activity is only 3 cm deep but 90% of the invertebrates occur within it. Comparison of published tubificid defecation rates with sediment accumulation rates based on²¹⁰Pb shows that oligochaetes alone can account for mixing in one case while the effects of amphipods may be required in the case of shallower mixing. If mixing is represented as a diffusional process, eddy diffusion coefficients are at least 5.8 and 3.3 cm² yr^?1 at respective locations. In comparison with bioturbation, molecular diffusion is of minor importance in the post-depositional mobility of¹³⁷Cs. The necessity for introducing a diffusion coefficient varying continuously with depth is indicated by characteristics of the distribution of¹³⁷Cs. Biological reworking of near-surface sediments is an important process affecting radioactivity and chemical profiles in profundal deposits of this and probably other Great Lakes.     

Trace elements in the sediments of a large Mediterranean marina (Port Camargue,France): Levels and contamination history

The study of trace elements (Cu, Zn, Pb, As, Hg) and butyltin concentrations in the sediments of Port Camargue enabled assessment of the levels and history of the contamination of the largest European marina linked with the use of antifouling paints. Surface sediments near the boat maintenance area were heavily contaminated with up to 1497 μg g⁻¹ of Cu, 475 μg g⁻¹ of Zn, 0.82 μg g⁻¹ of Hg, 94 μg g⁻¹ of Pb and over 10,000 ngSn g⁻¹ of tributyltin (TBT). High concentrations of Hg and TBT indicate ongoing sources of these elements despite the ban on their use as biocides in paints. Sediment cores provided records of contamination since 1969. The peak concentrations of As, Hg, Pb and TBT in the sediment profile reflect their presence on boat hulls when the marina was built at the end of the 1960s. Degradation of TBT in the sediments near the boat maintenance area is slow compared to other less contaminated area of the marina.     

Pb-derived ages for the reconstruction of terrestrial contaminant history into the Mexican Pacific coast: Potential and limitations

²¹⁰Pb is widely used for dating recent sediments in the aquatic environment; however, our experiences working in shallow coastal environments in the Pacific coast of Mexico have demonstrated that the potential of ²¹⁰Pb for reliable historical reconstructions might be limited by the low ²¹⁰Pb atmospheric fallout, sediment mixing, abundance of coarse sediments and the lack of ¹³⁷Cs signal for ²¹⁰Pb corroboration. This work discusses the difficulties in obtaining adequate sedimentary records for geochronological reconstruction in such active and complex settings, including examples of ²¹⁰Pb geochronologies based on sediment profiles collected in two contrasting areas coastal areas (mudflats associated to coastal lagoons of Sinaloa State and the continental shelf of the Gulf of Tehuantepec), in which geochemical data was used to support the temporal frame established and the changes in sediment supply recorded in the sediment cores which were related to the development of land-based activities during the last century.     

Dating of sediments from Lake Zurich (Switzerland) with210Pb and137Cs

²¹⁰Pb- and¹³⁷Cs-measurements, and varve counting have been used to date sediment cores from Lake Zurich (Switzerland). Two cores from different water depths were dated with²¹⁰Pb/²¹⁰Po and revealed sediment accumulation rates of (0.055±0.015) g·cm^?2·y^?1 and (0.09±0.03) g·cm^?2·y^?1, respectively. A comparable rate of (0.07±0.01) g·cm^?2·y^?1 has been obtained from¹³⁷Cs measurements. These rates were confirmed by annual layer (varve)-counts which lead to rates of 0.07 g·cm^?2·y^?1. Constant²¹⁰Pb activities were observed in the top 6 cm of the sediment cores. This constancy is generally explained in the literature by mixing processes caused by bioturbation and by distortion during coring operations of the uppermost water-rich fluffy sediments. However the distinct¹³⁷Cs-maxima and the regular and undisturbed varve lamination of the top sediment observed in the cores of Lake Zurich contradict this assumption. In addition, measurements of⁷Be at the water/sediment interaces proved complete sediment core recovery and mechanically undisturbed sediments. Remobilization processes are assumed to cause the observed constant²¹⁰Pb activities. Remobilization may also be the reason for an incomplete²¹⁰Pb inventory in the sediments which contain only about 50% of the fallout from atmosphere. The results of the²¹⁰Pb dating should therefore be considered with some care. If existent, varve counting represents the easiest and most reliable means for dating lake sediments.     

Lacustrine sediments and lichen transplants: two contrasting and complimentary environmental archives of natural and anthropogenic lead in the South Urals, Russia

Lead (Pb) concentrations and isotope ratios of two different geochemical archives are compared; lake sediment cores and lichens (Hypogymnia physodes, naturally growing and transplanted) from a ca. 80 km-long transect centred on the Cu smelter and former mining town of Karabash, Ural Mountains, Russia. Lead concentrations in sediment cores from 10 lakes were generally low near their base and show an abrupt increase in their upper portions interpreted to coincide with the onset of large-scale smelting operations in 1910. Lead isotope ratios derived from ²⁰⁴Pb, ²⁰⁶Pb, ²⁰⁷Pb, ²⁰⁸Pb of the bottom layers differed significantly from those of the top. The top sediments have isotope ratios that show distinct end members, one of which was the stack dust from the Karabash smelter, which is similar to the Pb derived from ores from Sibay, a major mine in the Urals. The composition of the bottom sediment layers generally fall slightly off a mixing line between the top sediments and average Earth’s upper crust. Lichens transplanted from a reference site, as well as naturally growing lichens, sampled from southwest of the smelter have isotope ratios similar to those of the stack dust. Lichens to the northeast contained Pb from the smelter, but are increasingly influenced by other sources probably leaded petrol and local soils, and a signature derived from a source enriched in ²⁰⁷Pb. Vegetables collected from local kitchen gardens contained Pb from an additional atmospheric source, possibly coal. Our work confirms that: (1) Pb isotopes in lake sediments provide a long-term record of inputs and allows the characterisation of natural and anthropogenic sources; (2) Pb isotopes in lichens provide a short-term record of local and long-range atmospheric deposition at high spatial resolution and short time scales as they replace their Pb content within a few months; (3) determination of all four stable Pb isotopes is necessary for the identification of the sources of Pb and is extremely sensitive for discerning minor source signatures, even in an area with a dominant source such as a smelter. Particularly significant for the Karabash area is that ore-smelter-derived airborne Pb is a major component in the lake sediments and lichens but its contribution reaches insignificant levels ca. 40 km from the smelter.     

The enrichment characteristics of mercury in the sediments of Dongjiu and Xijiu, Taihu lake catchment, in the past century

The concentration and the enrichment factors of mercury (Hg) in the sediment cores of Dongjiu and Xijiu, Taihu Lake catchment, were studied. The accumulation fluxes, anthropogenic input concentration and anthropogenic accumulation fluxes of Hg in recent 100 years were also analyzed based on the 210Pb dating. The results indicate that the increasing concentrations of Hg in the sediments are influ-enced by natural factors and anthropogenic input simultaneously. Generally, about 2/3 of the Hg in the sediment was from anthropogenic sources. In the early 20th century, the anthropogenic input was owing to the urban development and fossil fuel consumptions surrounding the Taihu Lake and the worldwide atmospheric deposition of Hg since the industrial revolution. The concentration and an-thropogenic fluxes of Hg increased with the industrial development in the catchment since the 1930s. It reached the maximum during the middle 1970s and middle 1990s, and decreased since the middle 1990s with constraints on high pollution industries.     

Anthropogenic metal contamination and sapropel imprints in deep Mediterranean sediments

Sediment cores from the deep Balearic basin and the Cretan Sea provide evidence for the accumulation of Cd, Pd and Zn in the top few centimeters of the abyssal Mediterranean sea-bottom. In both cores, 206Pb/207Pb profiles confirm this anthropogenic impact with less radiogenic imprints toward surface sediments. The similarity between excess 210Pb accumulated in the top core and the 210Pb flux suggests that top core metal inventories reasonably reflect long-term atmospheric deposition to the open Mediterranean. Pb inventory in the western core for the past 100 years represents 20-30% of sediment coastal inventories, suggesting that long-term atmospheric deposition determined from coastal areas has to be used cautiously for mass balance calculations in the open Mediterranean. In the deeper section of both cores, Al normalized trace metal profiles suggest diagenetic remobilization of Fe, Mn, Cu and, to a lesser extent, Pb that likely corresponds to sapropel event S1.     

Recent aquatic ecosystem response to environmental events revealed from Pb sediment profiles

The ²¹⁰Pb dating method was first introduced by Goldberg (1963), and since then has been applied to study sediment from lakes, estuaries and coastal marine environments. Hundreds of studies around the world have used ²¹⁰Pb as a geochronological tool in aquatic ecosystems. However little attention has been paid to the potential of this naturally occurring isotope as an environmental tracer of ecological events. Here we report three instances in which ²¹⁰Pb profiles measured on undisturbed sediment cores from lakes, rivers and fjords show us the potential of ²¹⁰Pb profile as a tracer of natural and anthropogenic processes. The methodology used here is a suite of techniques combining biogeochemistry (micro-electrodes), paleomagnetism (susceptibility), sediment characteristics (LOI) and visualization (SPI and X-ray) applied to the interpretation of ²¹⁰Pb profiles. We measured ²¹⁰Pb profiles on sediments from a river, Cruces River (Chile), which recorded a clear shift in the water chemistry caused by a pulp mill effluent to the river. Here metal mobilization and remobilization of the tracer may be the cause of the observed profile. We also measured ²¹⁰Pb profiles in sediment from two fjords of Southern Chile (Pillan and Reñihue), the sudden deposition change of fresh ²¹⁰Pb with depth observed could very well be the result of bioturbation but it occurred in a seafloor area deprived of bioturbators. In this case, ²¹⁰Pb recorded the onset of aquaculture activities (fish farming) that took place two decades ago. Finally, ²¹⁰Pb profiles measured in two lakes in the “pampa Argentina”: Epecuen and Venado showed a particular shape with depth. These profiles apparently registered a sudden depositional event with recent ²¹⁰Pb material, probably related to strong shifts in precipitation and drought cycles in that part of the world. These three examples show that ²¹⁰Pb profiles provide valuable information not only on geochronology, but also related to natural and anthropogenic short term processes, as shown here, but these are not always reported and well understood.     

Trace metal distributions in Saint John Harbour sediments

The concentration and areal distribution of selected trace metals (Cu, Zn, Pb, Cd, Mo, Ni, Mn and Hg) in surficial sediments of Saint John Harbour, New Brunswick, Canada, were studied to determine the extent of anthropogenic input and to estimate the effects of dumping dredged material in the outer harbour. Hg and Cd are of especial concern, since the disposal of dredge material containing these two elements is regulated under the Ocean Dumping Control Act.The concentrations of all metals are low: Cu 16, Zn 53, Pb 24, Cd 0.16, Mo 3, Ni 16, Mn 296 and Hg 0.04 μg g^?1. Hg and Cd levels in sediments are well below the permissible limits of 0.75 and 0.6 μg g^?1, respectively, set by the Ocean Dumping Control Act.The mean concentrations of trace elements are similar to the low mean values in the unpolluted Bay of Fundy. There is an overall decline in concentrations of metals in the sediments from the inner to the outer harbour. Comparison of the metal levels in the sediments from different areas within the harbour indicate that there is a detectable anthropogenic input in the Courtenay Bay area. Trace metal levels at the dumpsite are significantly lower than in the Courtenay Bay area, where the bulk of the dredged material originates.     

Effects of biological sediment mixing on the210Pb chronology and trace metal distribution in a Long Island Sound sediment core

An experiment was designed to assess the relative importance of sediment accumulation and bioturbation in determining the vertical distribution of nuclides in estuarine sediments. A diver-collected core, 120 cm long, was raised from central Long Island Sound and analyzed down its length for:²¹⁰Pb and²²⁶Ra;^{239, 240}Pu; and Mn, Zn, Cu, and Pb. Sampling for chemical analysis was guided by X-radiography of the core. Excess²¹⁰Pb (relative to²²⁶Ra) is roughly homogeneous in the top 2–4 cm of the core, then decreases quasi-exponentially to zero at (or above) 15 cm.^{239, 240}Pu and excess Zn, Cu, and Pb, relative to background values at greater depths in the core, are distributed like excess²¹⁰Pb in the top 10–15 cm. The absence of Mn enrichment at the top of the core, in contrast to other cores raised from this station, suggests that 1–3 cm of sediment was lost by erosion at the site of this core sometime prior to sampling. Below 15 cm excess²¹⁰Pb and excess Zn, Cu, and Pb are found only in the bulk sample from 25 to 30 cm and in clearly identifiable burrow fillings dissected from 70 cm and 115 cm depth. Infilling of large burrows, excavated and then abandoned by crustaceans, is therefore a mechanism for transfer of surficial material to depth in these sediments.The bioturbation rate in the top several centimeters at this station has been determined previously using²³⁴Th (24-day half-life). The distribution of^{239, 240}Pu can be used to estimate a bioturbation rate for the underlying layer (to ～10 cm depth); this rate is found to be 1–3% of the maximum mixing rate for the top 2–3 cm. Using these two mixing rates in a composite-layer, mixing + sedimentation model, the distribution of excess²¹⁰Pb in the top 15 cm was used to constrain the sediment accumulation rate, ω. While the apparent rate of sediment accumulation (assuming no mixing below 2–4 cm) is 0.11 cm/yr, the model requires ω < 0.05 cm/yr. Thus in an area of slow sediment accumulation, a low rate of bioturbation below the surficial zone of rapid mixing causes an increase of at least a factor of two in apparent accumulation rate.     

Fine scale distributions of porosity and particulate excessPb, organic carbon and CaCO3 in surface sediments of the deep equatorial Pacific

Sediment samples were recovered from the central equatorial Pacific Ocean, sectioned at 1-mm intervals, and analyzed for porosity, organic carbon, excess²¹⁰Pb and CaCO₃. Steep porosity gradients were measured in the upper 1 cm of the sediment column with extremely high values observed near the sediment surface. Similarly, particulate organic carbon contents are highest at the sediment surface, decrease sharply in the upper 1 cm, and are relatively constant between 1 and 5 cm. CaCO₃ values, on the other hand, are lowest at the sediment surface and increase to a constant value below 5–10 mm depth. At the carbonate ooze sites, excess²¹⁰Pb is present throughout the upper 5 cm of the sediments suggesting relatively rapid particle mixing rates. However, extremely high excess²¹⁰Pb activities (> 100 dpm/g) are observed at the sediment surface with sharp gradients present in the upper 1 cm which would suggest slow rates of mixing. This apparent contradiction along with the major features of the CaCO₃ and particulate organic carbon profiles can be explained by a particle-selective feeding mechanism in which organic carbon, excess²¹⁰Pb-enriched particles are preferentially maintained at the sediment surface via ingestion and defecation by benthic organisms.     

PCBs in Central Vietnam coastal lagoons: levels and trends in dynamic environments

PCBs were analysed in surficial sediments and selected sediment cores collected between 2002 and 2008 in Central Vietnam coastal lagoons. The aim was to determine contamination levels and trends, and to evaluate the effects of anthropogenic pressures and natural events. Samples were mostly fine-grained with low total PCB concentrations (0.367-44.7 μg kg⁻¹). Atmospheric transport and post depositional processes modify to some degree the fingerprint of PCB inputs to the environment favouring the predominance of 3, 4 and 5 chlorinated congeners. The similarity of congener distributions in contemporary surficial samples also suggests the presence of a unique source over the entire study area, probably connected to mobilisation and long range transports from land-based stocks. The removal of consistent sediment layers is hypothesised based on repeated samplings of the same area. Natural meteorological events (such as typhoons) are suspected to be responsible for these sediment losses.     

Effect of mining and related activities on the sediment trace element geochemistry of Lake Coeur D'Alene,Idaho, USA part II: Subsurface sediments

During the summer of 1990, 12 gravity cores were collected in Lake Coeur d'Alene, Idaho at various depths and in a variety of depositional environments. All core subsamples were analysed to determine the bulk sediment chemistry; selected subsamples were analysed for trace element partitioning and ¹³⁷Cs activity. The purpose of these analyses was to determine the trace element concentrations and distributions in the sediment column and to try to establish a trace element geochemical history of the lake in relation to mining and mining-related discharge operations in the area. Substantial portions of the near-surface sediments in Lake Coeur d'Alene are markedly enriched in Ag, As, Cd, Hg, Pb, Sb and Zn, and slightly enriched in Cu, Fe and Mn. Variations in the thickness of the trace element-rich sediments, which range from more than 119 cm to as little as 17 cm, indicate that the source of much of this material is the Coeur d'Alene River. An estimated 75 million tonnes of trace element-rich sediments have been deposited on or in the lake bed. Estimated trace element masses in excess of those considered representative of background conditions range from a high of 468 000 tonnes of Pb to a low of 260 tonnes of Hg. The similarity between the trace element-rich surface and subsurface sediments with respect to their location, their bulk chemistry, their interelement relations and their trace element partitioning indicate that the sources and/or concentrating mechanisms causing the trace element enrichment in the lake sediments have probably been the same through-out their depositional history. Based on a Mt St Helens'ash layer from the 1980 eruption, ages estimated from ¹³⁷Cs activity and the presence of 80 discernible and presumably annual layers in a core collected near the Coeur d'Alene River delta indicate that deposition rates for the trace element-rich sediments have ranges from 2.1 to 1.3 cm/year. These data also indicate that the deposition of trace element-rich sediments began, at least in the Coeur d'Alene River delta, some time between 1895 and 1910, dates consistent with the onset of mining and ore processing activities that began in the area in the 1880s.     

Fine scale distributions of porosity and particulate excess210Pb,organic carbon and CaCO3 in surface sediments of the deep equatorial Pacific

Sediment samples were recovered from the central equatorial Pacific Ocean, sectioned at 1-mm intervals, and analyzed for porosity, organic carbon, excess²¹⁰Pb and CaCO₃. Steep porosity gradients were measured in the upper 1 cm of the sediment column with extremely high values observed near the sediment surface. Similarly, particulate organic carbon contents are highest at the sediment surface, decrease sharply in the upper 1 cm, and are relatively constant between 1 and 5 cm. CaCO₃ values, on the other hand, are lowest at the sediment surface and increase to a constant value below 5–10 mm depth. At the carbonate ooze sites, excess²¹⁰Pb is present throughout the upper 5 cm of the sediments suggesting relatively rapid particle mixing rates. However, extremely high excess²¹⁰Pb activities (> 100 dpm/g) are observed at the sediment surface with sharp gradients present in the upper 1 cm which would suggest slow rates of mixing. This apparent contradiction along with the major features of the CaCO₃ and particulate organic carbon profiles can be explained by a particle-selective feeding mechanism in which organic carbon, excess²¹⁰Pb-enriched particles are preferentially maintained at the sediment surface via ingestion and defecation by benthic organisms.