Two pulses of mineralization and genesis of the Zhaxikang Sb–Pb–Zn–Ag deposit in southern Tibet: Constraints from Fe–Zn isotopes

Zhaxikang is one large Sb–Pb–Zn–Ag deposit located in the North Himalaya of southern Tibet. To date, the genesis of this deposit still remains controversial. Here, we present new pyrite Fe and sphalerite Zn isotopic data for the first three stages of mineralization, Fe–Zn isotopic data for Mn–Fe carbonate that formed during the first two stages of mineralization, and Zn isotopic data for the slate wall rocks of the Jurassic Ridang Formation to discuss the genesis of the Zhaxikang deposit. The overall δ⁵⁶Fe and δ⁶⁶Zn values range from −0.80‰ to 0.43‰ and from −0.03‰ to 0.38‰, respectively. The δ⁵⁶Fe values of Mn–Fe carbonates are lighter than those of associated pyrite in six mineral pairs, indicating that the iron carbonates are preferentially enriched in light Fe isotopes relative to pyrite. The sphalerite has lighter δ⁶⁶Zn values than associated Mn–Fe carbonates in three mineral pairs.The δ⁵⁶Fe values of pyrite that formed during the first three stages of mineralization gradually increase from stage 1 (−0.33‰ to −0.09‰) through stage 2 (−0.30‰ to 0.19‰) to stage 3 (0.16‰–0.43‰). In comparison, the sphalerite that formed during these stages has δ⁶⁶Zn values that gradually decrease from stage 1 (0.16‰–0.35‰) through stage 2 (0.09‰–0.23‰) to stage 3 (−0.03‰ to 0.22‰). These data, in conjunction with the observations of hand specimens and thin sections, suggest that the deposit was overprinted by a second pulse of mineralization. This overprint would account for these Fe–Zn isotopic variations as well as the kinetic Rayleigh fractionation that occurred during mineralization. The temporally increasing δ⁵⁶Fe and decreasing δ⁶⁶Zn values recorded in the deposit are also coincident with an increase in alteration, again supporting the existence of two pulses of mineralization. The δ⁵⁶Fe values of the first pulse of ore-forming fluid were calculated using theoretical equations, yielding values of −0.54‰ to −0.34‰ that overlap with those of submarine hydrothermal solutions (−1‰ to 0‰). However, the δ⁵⁶Fe values of the stage 3 pyrite are heavier than those of typical submarine hydrothermal solutions, which suggests that the second pulse of mineralization was probably derived from a magmatic hydrothermal fluid. In addition, the second pulse of ore-forming fluid has brought some Fe and taken away parts of Zn, which results the lighter δ⁶⁶Zn values of sphalerite and heavier δ⁵⁶Fe values of pyrite from the second pulse of mineralization. Overall, the Zhaxikang deposit records two pulses of mineralization, and the overprint by the second pulse of mineralization causes the lighter δ⁶⁶Zn values and heavier δ⁵⁶Fe values of modified samples.     

Ore Deposit Geology and Genesis of the Haobugao Zn–Fe Deposit, Inner Mongolia, NE China

Please?refer?to?the?attachment(s)?for?more?details.     

Preliminary Study of the Characteristics and Genesis of Arsenate Minerals in the Oxidized Zone of the Debao Skarn-Type Cu-Sn Ore Deposit in Guangxi

Through the study of the oxidized zone of the Debao skarn-type Cu-Sn deposit in Guangxi, the authorshave found 14 arsenate minerals, most of which are for the first time reported in China. They are mainly Cuarsenate minerals with subordinate Cu-Pb arsenate minerals and minor Fe-Pb-Ba varieties. Based on their paragenesis these minerals may be divided into the following series: (1) the clinoclasite-olivenite-cornwallite- cornubite- debaoite- copper silicarsenate association, (2) the scorodite- carminite- beudan-tite-bayldonite- duftite association, and (3) the scorodite-Ba-bearing pharmacosiderite- dussertite association. Arsenate minerals are formed generally in the oxidized zone of the sulfide-type deposits which lie in thewarm, humid and rainy torrid-subtropical zone with pH=6-8 and contain large amounts of arsenopyrite andcarbonate rocks.     

Geological Characteristics and Genesis of the Jiamoshan MVT Pb–Zn Deposit in the Sanjiang belt,Tibetan Plateau

The carbonate-hosted Pb–Zn deposits in the Sanjiang metallogenic belt on the Tibetan Plateau are typical of MVT Pb–Zn deposits that form in thrust-fold belts. The Jiamoshan Pb–Zn deposit is located in the Changdu area in the middle part of the Sanjiang belt, and it represents a new style of MVT deposit that was controlled by karst structures in a thrust–fold system. Such a karst-controlled MVT Pb–Zn deposit in thrust settings has not previously been described in detail, and we therefore mapped t...     

Mineralogy of Copper in Sulfide-Free Endogenic Pb–Zn–Sb Mineralization of the Pelagonian Massif,Republic of North Macedonia

Geology of Ore Deposits - Behavior of copper in sulfide-free metasomatic ores of the Pelagonian massif, Republic of North Macedonia has been studied. It is shown that the highest copper activity...     

Metallogenic Dynamics of Zhashui Ag－Pb Polymetallic Ore Deposit in Shaanxi，China

ＭｅｔａｌｌｏｇｅｎｉｃＤｙｎａｍｉｃｓｏｆＺｈａｓｈｕｉＡｇ－ＰｂＰｏｌｙｍｅｔａｌｌｉｃＯｒｅＤｅｐｏｓｉｔｉｎＳｈａａｎｘｉ，ＣｈｉｎａＷｅｉＪｕｎｈａｏ；ＬｉＪｉａｎｗｅｉ；ＷａｎｇＳｉｙｕａｎ（ＦａｃｕｌｔｙｏｆＥａｒｔｈＲｅｓｏｕｒｃｅｓ...     

Metallegenesis of the Nongtun Large-scale Pb–Zn Deposit in Guangxi, South China: a Preliminary Study on the Fluid Inclusion

Please refer to the attachment(s) for more details.     

Peculiarities of Ore Formation at the Teploe Ag–Au Deposit,Northeast Russia

The mineralogical–geochemical and thermobarogeochemical features of the Teploe Ag–Au epithermal deposit are considered. The dissolution and redeposition of ore minerals are a result of thermal metamorphism. The redistribution of Ag leads to the formation of lenaite and exsolution structures in minerals of the Cu–Ag–S system; abundant stromeyerite, jalpaite, and mckinstryite compose a significant amount of ores. The atypical physicochemical parameters of the formation of ores include high (for epithermal mineralization) temperatures and low salinity and density of the fluid typical of a dry vapor. The results of fluid inclusion study ascribe the Teploe deposit to an intermediate class of epithermal deposits.     

Re–Os and U–Pb Geochronology of the Erlihe Pb–Zn Deposit, Qinling Orogenic Belt, Central China, and Constraints on Its Deposit Genesis

The Erlihe Pb–Zn deposit is an important mine of the Pb–Zn metallogenic zone in the South Qinling Orogen. It has been considered a sedimentary exhalative deposit in previous investigations because the ore body occurs concordantly at the transitional location of an upright fold. Re and Os isotopic analyses for paragenetic pyrites with sphalerite and galena from the ore body have been used to determine the timing of mineralization and to trace the source of metallogenic materials. The Re–Os isotopic data of four pyrite samples construct an isochron, yielding a weighted average age of 226±17 Ma (mean square weighted deviation=1.7), which is considered the main mineralization age. A dioritic porphyrite vein sample, showing weaker mineralization, was also dated using the SHRIMP zircon U–Pb isotopic method to constrain the youngest metallogenic age of the ore deposit, because it distributes along a group of tensional joints cutting not only the upright fold in the deposit field, but also the main ore bodies. The dioritic porphyrite sample yields a weighted mean 206Pb/238U age of 221±3 Ma, which is slightly younger than the Re–Os isotopic isochron age of the pyrites, considered as the upper age limit of the mineralization, namely the ending age of the mineralization. The Os isotopic compositions of sulfide minerals distribute within a range between Os isotopic compositions of the crust and the mantle, indicating that the ore deposit can be derived from magma-related fluid, and the metallogenic materials are most likely derived from the mixing source of the crust and the mantle. The Erlihe Pb–Zn deposit and associated dioritic porphyrite vein, important records of Qinling tectonic–magmatism–mineralization activities, were formed during the Triassic collisional orogeny processes.     

Heavy metal contamination in the vicinity of the Daduk Au–Ag–Pb–Zn mine in Korea

The heavy metal contamination and seasonal variation of the metals in soils, plants and waters in the vicinity of an abandoned metalliferous mine in Korea were studied. Elevated levels of Cd, Cu, Pb and Zn were found in tailings with averages of 8.57, 481, 4,450 and 753 mg/kg, respectively. These metals are continuously dispersed downstream and downslope from the tailings by clastic movement through wind and water. Thus, significant levels of the elements in waters and sediments were found up to 3.3 km downstream from the mining site, especially for Cd and Zn. Enriched concentrations of heavy metals were also found in various plants grown in the vicinity of the mining area, and the metal concentrations in plants increased with those in soils. In a study of seasonal variation on the heavy metals in paddy fields, relatively high concentrations of heavy metals were found in rice leaves and stalks grown under oxidizing conditions rather than a reducing environment (P<0.05).     

Ore Genesis for Stratiform Ore Bodies of the Dongfengnanshan Copper Polymetallic Deposit in the Yanbian Area, NE China：Constraints from LA-ICP-MS in situ Trace Elements and Sulfide S–Pb Isotopes

The Dongfengnanshan Cu polymetallic deposit is one representative deposit of the Tianbaoshan ore district in the Yanbian area, northeast(NE) China. There occur two types of ore bodies in this deposit, the stratiform ore bodies and veintype ones, controlled by the Early Permian strata and the Late Hercynian diorite intrusion, respectively. Due to the ambiguous genetic type of the stratiform ore bodies, there has been controversy on the relationship between them and veintype ore bodies. To determine the genetic type of stratiform ore bodies, laser ablation inductively coupled plasma mass spectrometry(LA-ICP-MS) in situ trace elements and S–Pb isotope analysis have been carried on the sulfides in the stratiform ore bodies. Compared with that in skarn, Mississippi Valley-type(MVT), and epithermal deposits, sphalerite samples in the stratiform ore bodies of the Dongfengnanshan deposit are significantly enriched in Fe, Mn, and In, while depleted in Ga, Ge, and Cd, which is similar to the sphalerite in volcanic-associated massive sulfide(VMS) deposits. Co/Ni ratio of pyrrhotites in the stratiform ore bodies is similar to that in VMS-type deposits. The concentrations of Zn and Cd of chalcopyrites are similar to those of recrystallized VMS-type deposits. These characteristics also reflect the intermediate ore-forming temperature of the stratiform ore bodies in this deposit. Sulfur isotope compositions of sulfides are similar to those of VMS-type deposits, reflecting that sulfur originated from the Permian Miaoling Formation. Lead isotope compositions indicate mixed-source for lead. Moreover, the comparison of the Dongfengnanshan stratiform ore bodies with some VMStype deposits in China and abroad, on the trace elements and S–Pb isotope characteristics of the sulfides reveals that the stratiform ore bodies of the Dongfengnanshan deposit belong to the VMS-type, and have closely genetic relationship with the early Permian marine volcanic sedimentary rocks.     

Genesis of the Weiquan Ag–Polymetallic Deposit in East Tianshan, China: Evidence from Zircon U–Pb Geochronology and C–H–O–S–Pb Isotope Systematics

The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, controlled by faults, occur in the lower Carboniferous volcanosedimentary rocks of the Yamansu Formation as irregular veins and lenses. Four stages of mineralization have been recognized on the basis of mineral assemblages, ore fabrics, and crosscutting relationships among the ore veins. Stage I is the skarn stage(garnet + pyroxene), Stage Ⅱ is the retrograde alteration stage(epidote + chlorite + magnetite ± hematite 士 actinolite ± quartz),Stage Ⅲ is the sulfide stage(Ag and Bi minerals + pyrite + chalcopyrite + galena + sphalerite + quartz ± calcite ± tetrahedrite),and Stage IV is the carbonate stage(quartz + calcite ± pyrite). Skarnization,silicification, carbonatization,epidotization,chloritization, sericitization, and actinolitization are the principal types of hydrothermal alteration. LAICP-MS U-Pb dating yielded ages of 326.5±4.5 and 298.5±1.5 Ma for zircons from the tuff and diorite porphyry, respectively. Given that the tuff is wall rock and that the orebodies are cut by a late diorite porphyry dike, the ages of the tuff and the diorite porphyry provide lower and upper time limits on the age of ore formation. The δ~(13)C values of the calcite samples range from-2.5‰ to 2.3‰, the δ~(18)O_(H2 O) and δD_(VSMOW) values of the sulfide stage(Stage Ⅲ) vary from 1.1‰ to 5.2‰ and-111.7‰ to-66.1‰, respectively,and the δ~(13)C, δ~(18)O_(H2 O) and δD_(V-SMOW) values of calcite in one Stage IV sample are 1.5‰,-0.3‰, and-115.6‰, respectively. Carbon, hydrogen, and oxygen isotopic compositions indicate that the ore-forming fluids evolved gradually from magmatic to meteoric sources. The δ~(34)S_(V-CDT) values of the sulfides have a large range from-6.9‰ to 1.4‰, with an average of-2.2‰, indicating a magmatic source, possibly with sedimentary contributions. The ~(206)Pb/~(204)Pb, ~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of the sulfides are 17.9848-18.2785,15.5188-15.6536, and 37.8125-38.4650, respectively, and one whole-rock sample at Weiquan yields~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of 18.2060, 15.5674, and 38.0511,respectively. Lead isotopic systems suggest that the ore-forming materials of the Weiquan deposit were derived from a mixed source involving mantle and crustal components. Based on geological features, zircon U-Pb dating, and C-H-OS-Pb isotopic data, it can be concluded that the Weiquan polymetallic deposit is a skarn type that formed in a tectonic setting spanning a period from subduction to post-collision. The ore materials were sourced from magmatic ore-forming fluids that mixed with components derived from host rocks during their ascent, and a gradual mixing with meteoric water took place in the later stages.     

Light Hydrocarbons in Fluid Inclusions and Their Constraints on Ore Genesis: A Case Study of the Songxi Ag (Sb) Deposit, Eastern Guangdong, China

The Songxi deposit is a newly discovered large Ag (Sb) deposit. By using a suite of high-vacuum quadrupole gas mass spectrometer systems, the authors have recognized many kinds of light hydrocarbons in fluid inclusions of minerals. These hydrocarbons are mainly composed of C1-C4 saturated alkanes, while the contents of C2-C4 unsaturated alkenes and aromatic hydrocarbons are quite low, suggesting that the metallogenic processes have not been affected by magmatic activities. Chemical equilibrium studies show that these hydrocarbons may be a mixture of organic gases generated by microorganism activity and those by thermal cracking of type-n kerogens (kukersite) in sedimentary host rocks, and the former may constitute more than two-thirds, implying that microorganism might have played an important role in the metallogenesis. The equilibrium temperature of the latter is about 300℃, which is much higher than the geothermal temperature at the estimated depth of metallogenesis. Thus, the light hydrocarbons gen     

The Genesis of Lincang Germanium Deposit—A Preliminary Investigation

The mechanism of formation of the Lincang germanium deposit is discussed in the light of the spatial distribution of Ge-rich coal and siliceous rocks,the sulfur isotopic composition of pyrite in the Ge-rich coal,the variation of Ge abundance in the coal seams and the geochemical characteristics of the siliceous rocks.The results show that the siliceous rocks intercalated with the coal seamw were deposited from a hyrothermal medium through which germanium was enriched in the coal beds.The primary source of germanium is thought to be the Gerich granite in the basement of the sedimentary basin.     

A Report of the Newly Discovered Cu–Ni Ore Deposit in the West of East Tianshan, North Xinjiang, China

正Objective The Early Permian mafic–ultramafic intrusions(298–270 Ma,Mao et al.,2008),which are widely distributed in different tectonic domains in North Xinjiang,host magmatic sulfide ore deposits,making North Xinjiang the second most important region for Ni resources in China.The bulk of Cu–Ni ore deposits in East Tianshan,making up a large portion of Ni resources in North Xinjiang,were     

Physicochemical Conditions during the Formation of Dalingkou Ag—Pb—Zn Deposit,Zhejiang Province

On the basis of mineral paragenesis and the chemistry and homogenization temperatures of fluid inclusions, the physicochemical parameters were calculated for the formation of the Dalingkou Ag-Pb-Zn deposit in Zhejiang. From the early to the late stage of mineralization the ore-forming temperature venation was found to be 298.5 °C → 267.0 °C → 217.6 °C → 167.3 °C, with a corresponding pH change of 3.0 ∼ 5.8 → 6.1 → 6.7→ 5.0 ∼ 7.3. The pressure changed from 403.8 to 128.5 atm, andlogf S₂-9.9 → -11.2 → < -15; logf o₂< -44→ -45.6 ∼ -42.6 → > -44.2; and logf co₂ around -1.55. In conjunction with geological observations, the deposit is considered to be of meso-epithermal origin, i.e., it was formed after continental volcanic-subvolcanic activity. The major factors affecting ore precipitation are the decreasing temperature and the increasing pH of ore-forming solutions.     

Features of the Ore Forming Process on the Dvoinoye Epithermal Au–Ag Deposit (Western Chukotka)

The results of thermobaric geochemical study of ores of the Dvoinoye epithermal Au–Ag deposit are considered. Study of the fluid inclusions has shown that the ores were formed from low-salinity hydrothermal solutions with Na, Ka, and Mg chlorides and CO₂, HS^–, CH₄ trace fluxes at the time when the temperature dropped from 370 to 130°C. The results are compared with data obtained from the closely located Kupol and Sentyabr’skoye deposits.     

Metallogenic Mechanism of the Tianbaoshan Pb—Zn Deposit,Sichuan

The Tianbaoshan Pb-Zn deposit in Sichuan Province,exhibiting open-space-filling and /or replacement textures,occurs as being of vine style in the Sinian(Late Proterozoic) carbonate rocks,and is simple in ore composition.A systematic study of lead isotope and rareearth elements reveals that the ore-forming materials were derived from multiple sources.The ultimate source of the sulfur in all stages in seawater sulfate but the reducing mechanisms are different,The carbon was derved from marine carbonate and organic matter,The ore-forming fluid,meteoric in origin,belongs to a Ca^2 -Mg^2 -Cl^--Hco3^- type of weak acidic to alkalic solutions with a salinity of about 5wt% NaCl.The ore was formed at the depth of about 1 km from 150 to 250℃ during the main stage of ore deposition.The heated meteoric water,after extracting ore materials from wall rocks,evolved into ore-forming solution with a low salinity, in which metals were trasported as chloride complexes such as PbCl,ZnCl and ZnCl.The metal-bearing solution moved upward along deep faults to low-pressure zones,where the metal ions reacted with reduced sulfur and were precipitated as sulfied minerals.The textures of the minerals were controlled by the rate at which the reduced sulfur was supplied.