Micropaleontological study (foraminifera, ostracods) and characterization of the paleoenvironment of middle Cretaceous deposits (Djebel Chemla area, north-eastern Algeria)

The Djebel Chemla section is situated in the north-east of Algeria, close to the town of Tébessa and just a few kilometers from the Tunisian border. This section is composed mainly of a sequence of marl and marly limestone levels, alternating with recurring oyster levels which range in age from Vraconnian to the Early Turonian. Firstly, the micropaleontological study of the content (counting of foraminifera and ostracods, thin sections) allows the subdivision of the section into four biozones, with Rotalipora appenninica, Rotalipora globotruncanoides, Rotalipora cushmani, and Whiteinella archaeocretacea as bio-indicators; and, secondly, it provides the opportunity to specify the paleoenvironment. The supposed depositional environment is rather calm and deep, of an external platform type, with a maximum depth of 200 m. Bottom waters seem to be commonly poorly oxygenated. The end-Cenomanian anoxic crisis was also characterized by the presence of Bahloul facies levels, rich in TOC, in filaments and of globulous planktic foraminifera, including a considerable proportion of Heterohelix. The genus Rotalipora has disappeared a few levels lower down.     

Turonian Rudist Facies from Abu Roash area,North Western Desert,Egypt

Five radiolitid rudist species are described from the Turonian sequence of Abu Roash area. They are recognized in three rudist biostromes that occur in two informal members of Abu Roash Formation; the Rudist- and the Actaeonella-bearing limestone–marl members. The three biostromes show autochthonous and parautochthonous fabrics and moderate to high packing potential. The first rudist biostrome at the base of the Rudist-bearing limestone–marl member (Middle Turonian) contains Durania gaensis, Praeradiolites ponsianus and Bournonia fourtaui. The second biostrome in the same member consists of Bournonia roashensis. The third biostrome that recognized in the Actaeonella-bearing limestone–marl member (Late Turonian) consists of Durania arnaudi. Rudist biostromes in the Rudist-bearing limestone–marl member were deposited on subtidal rudist shoals with moderate to high energy versus that of the Actaeonella-bearing limestone–marl member that deposited in low to moderate energy on deeper part of subtidal rudist shoals. The exposed Turonian succession at Abu Roash area could be divided into three depositional sequences bounded by three sequence boundaries (paleosols and angular unconformity).The first rudist biostrome in the Rudist-bearing limestone–marl member represents the lower part of the transgressive systems tract of the first depositional sequence. The deepening upward trend of the transgressive systems tract is due to increase of accommodation space in transgressive context during relative sea-level rise episode. On the other hand, the second rudist biostrome in the Rudist-bearing limestone–marl member and the third rudist biostrome in the Actaeonella-bearing limestone–marl member are in shallowing-upward set sequence forming the highstand systems tract of the first and third depositional sequences. This indicates that, the accommodation space was being filled more rapidly than was being created during the highstand stage.     

Palynofacies patterns of the Devonian of the Parnaíba Basin,Brazil: Paleoenvironmental implications

To help describe the paleoenvironmental interpretation of one the most extensive marine Devonian successions in Brazil, palynofacies analyses were conducted on 46 samples from the Itaim (Pragian–Givetian), Pimenteira (Givetian–Frasnian) and Cabeças (Famennian) formations of the Parnaíba Basin in north–central Brazil. For the palynofacies analyses, kerogen categories were counted and subjected to cluster analyses. Five palynofacies associations were identified for three studied sections: PseudoAOM palynofacies, which consists of amorphous organic matter (AOM), pseudoamorphous and coenobial algae Quadrisporites; Transl/Nbiostr. palynofacies, which consists of translucent non-biostructured phytoclasts (well-preserved and degraded), cuticles (well-preserved and degraded), Spongiophyton and Botryococcus; Marine microplankton palynofacies, which consists of acritarchs, prasinophytes and translucent biostructured phytoclasts; Opaque palynofacies, which consists of opaque phytoclasts (equidimensional and lath shaped); and Sporomorphs palynofacies, which consists of zoomorphs (e.g., Chitinozoa) and sporomorphs (e.g., spores). The stratigraphic distribution of the five palynofacies associations reflects a continuous terrestrial influx throughout marine succession. At the Pragian–Emsian age, the woody material of Transl/Nbioestr. palynofacies prevails, suggesting a marine depositional paleoenvironment (presence of marine palynomorphs), but under deltaic influence due to the input of terrigenous material. An increasing trend of marine elements of Marine microplankton palynofacies is recorded for the Givetian, which suggests a progressive marine influence. However, during the Frasnian, the highest abundance of marine elements was recorded (Marine microplankton palynofacies). Moreover, a bloom of Maranhites spp. and prasinophytes (e.g., Tasmanites and Cymatiosphaera) was also recorded. The abrupt increase of marine palynomorphs in the Frasnian – here termed the “Maranhites Event” – has been recorded by other authors. Finally, in the Famennian, woody material was most abundant in Transl/Nbiostr. palynofacies and Sporomorphs palynofacies, which reflects a depositional trend that is strongly controlled by fluvial input into a shallow marine environment.     

Palynofacies evidence of dysoxia and upwelling in the Turonian of the Sergipe Basin,Brazil

This paper presents the integrated results of palynofacies and geochemical analyses in Turonian carbonate strata from the Sergipe Basin, Brazil. Forty-three outcrop samples were analyzed from sections of the Cotinguiba Formation in the Votorantim and Rita Cacete quarries. Our results allow for the characterization of the organic matter and interpretation of the environments of deposition. Together with the existing geochemical data, the results allow for recognition of oxic and dysoxic intervals and inferences pertaining to local oceanographic conditions to explain these environmental changes. The palynofacies groups are dominated by marine palynomorphs and amorphous organic matter (AOM), with minor amounts of terrigenous palynomorphs and phytoclasts. The total organic carbon (TOC) and δ¹³C ratio are directly correlated with the dominant palynofacies elements, particularly AOM. The upper section in Rita Cacete quarry has the most complete data set, and the TOC, δ¹³C and marine-derived AOM in this section tend to decrease upsection and serve to differentiate the oxic and dysoxic intervals. The sections also contain abundant, low-diversity dinoflagellate assemblages composed primarily of Trichodinium boltenhagenii, Cribroperidinium? muderongense, Canningia reticulata and Xenascus plotei. The palynofacies and dinoflagellate assemblages indicate deposition in shallow marine to outer neritic environments. The dysoxic events are recognized by an increase in TOC and δ¹³C, high amounts of AOM, an abundance of the low-diversity dinoflagellate assemblages and the lowest amounts of terrestrial components. The changes in marine productivity seem to be related to periods of low-intensity upwelling, which likely decreased the levels of dissolved oxygen in the basin.     

Geophysical investigation for shallow subsurface geotechnical problems of Mokattam area,Cairo, Egypt

Nine vertical electrical soundings of Schlumberger configuration were measured with AB/2 = 1–500 m. Manual and computerized interpretation were done to detect the subsurface stratigraphy of the study area. The results show that the subsurface section consists of alternated units of limestone, clay, marly limestone and dolomitic limestone and the thickness of clay unit ranged from 10 to 40 m. Nine dipole–dipole sections have also been constructed to give a clearer picture of the subsurface at the study area. The length of each dipole–dipole section is 235 m, with a electrode spacing ranging between 5 and 25 m. The Res2Dinv software was used for processing and interpretation of field data. The dipole–dipole sections at the upper plateau display high resistivity values at most parts of the plateau. Twelve shallow seismic refraction profiles are measured at selected locations for the dipole sections to define the interface between the fractured limestone and the upper surface of the clay layer. Each profile consists of 24 geophones with a geophone spacing of 2–3 m. Interpretation of seismic data indicates that the surface layer of the upper plateau consists of fractured limestone with a velocity range of 1.16–1.56 km/s and another layer of compacted clay with a velocity range of 1.38–1.88 km/s. Furthermore, the surface layer of the middle plateau consists of marl and marly limestone with a velocity about 2.1 km/s and its underlying layer consists of massive limestone with a velocity of 4.94 km/s.     

Sedimentary organic matter in condensed sections from distal oxic environments: examples from the Mesozoic of SE France

A detailed analysis of sedimentary organic matter (or palynofacies) was carried out on thermally immature to early mature Upper Jurassic and Hauterivian condensed intervals in deep-sea carbonate–marl alternations outcropping in the Vocontian Basin (SE France). All the condensed sections studied are characterized by intense bioturbation and very low organic carbon content (< 0·25 wt.%), indicative of oxic depositional conditions. Oxic condensed sections display variable palynofacies signatures, which are best illustrated by: (1) the ratio of continental to marine constituents; (2) the ratio of opaque to translucent phytoclasts (i.e. woody debris) and (3) the preservation of palynomorphs (based on fluorescence intensity and morphological preservation state in transmitted light microscopy). Both of the ratios increase with the degree of palynomorph degradation, which shows that phytoclasts, especially the opaque ones, become relatively concentrated in the most degraded facies. These observations lead to the classification of oxic condensed sections into three organic facies types showing different degrees of preservation and palynofacies signatures. Type 1 organic facies display intense degradation and are characterized by high values of the ratio of continental to marine fraction. They record unfavourable depositional environments for preservation of organic matter. Type 2 organic facies are most common and are characterized by a decreasing value of the ratio of continental to marine fraction. Type 3 organic facies display the same trend of the ratio of continental to marine fraction as type 2, but the palynomorph assemblage is better preserved. Type 1 and type 3 organic facies are relatively rare. Recognizing these organic facies types is important when analysing the relationship between sedimentary organic matter and sequence stratigraphy, because it allows the use of the appropriate palynofacies parameters. In particular, the use of the ratio of continental to marine constituents, usually a very good indicator of regressive–transgressive trends, becomes questionable in highly degraded intervals. Moreover, distinguishing between well-preserved or highly degraded palynofacies in condensed intervals provides valuable information on the oxicity of the depositional environment.     

Stratigraphic status,age, and paleobathymetry of the Grey shale Member,Dalmiapuram Formation,Cauvery Basin,India

Grey shale Member of the Dalmiapuram Formation, Ariyalur Group, Cauvery Basin, India was studied for its stratigraphic position, age, and paleobathymetry with a re-look into the lithological relationship and foraminifer assemblages in the deepened limestone mine excavations at M/s Dalmia Cements, Dalmiapuram. Twenty grey shale samples from Kovandankurchchi (pit-4) and Kallakkudi mines yielded diversified calcareous, benthic, and rare index planktic foraminifera. The foraminiferal assemblages suggest a latest Albian age and middle neritic depositional conditions. The abundance of kaolinite and smectite clay minerals relate to warm/humid climate which corroborate with rising relative sea level during grey shale deposition. The grey shale occurs in patches within the marl bedded limestone member which exhibits cyclic deposition of limestone and marl. The limestone mine sections demonstrate that the grey shale forms part of basal marl bedded limestone, directly overlying the coral algal limestone. The present study demonstrates that the grey shale outcrops in Dalmiapuram Formation should be placed stratigraphically as part of marl bedded limestone. The member status for grey shale which is current usage stands discounted.     

Tectonic and eustatic control on a mixed siliciclastic–carbonate platform during the Late Oxfordian–Kimmeridgian (La Rochelle platform,western France)

Boreal and Tethyan realms of Western Europe present significant sedimentological, paleontological, and stratigraphic differences. The purpose of this study is to constrain regional versus global controls on the dynamics of a sedimentary system located at the interface of these two realms in order to better understand the origin of their differences. Detailed sedimentological, palynofacies and calcareous nannofossil analyses were performed on two sections from the La Rochelle platform (western France). The Pas section includes part of the Late Oxfordian and Early Kimmeridgian, and the Rocher d'Yves section is assigned to the Late Kimmeridgian. They correspond to monotonous marl–argillaceous limestone alternations. Limestones are essentially mudstones with echinoderms, bivalves and foraminifera that suggest low-energy, open-marine conditions. Highly bioclastic and/or peloidal deposits occur commonly, and show wackestones to wacke-pack-grainstones textures. These deposits indicate frequent high-energy events, and are interpreted as storm deposits. Marls dominate in the most proximal depositional environments, while calcareous deposits are more important in more distal environments. The Rocher d'Yves section is globally more marly than the Pas section, suggesting a more proximal setting. Palynofacies are dominated by woody particles, suggesting shallow-water, proximal depositional environments. Calcareous nannofossils are ascidian spicules, coccoliths, and schizospheres. Watznaueria britannica dominate calcareous nannofossil assemblages in the Pas section. The Rocher d'Yves assemblages are quasi-exclusively composed of Cyclagelosphaera margerelii, and indicate more proximal paleoenvironments than those of the Pas section. Different orders of depositional sequences are defined, with sequence boundaries corresponding to the most rapid relative sea-level falls. They are hierarchically stacked, and correlate, on the basis of ammonite zones, with the sequences of contemporaneous sections from Tethyan and boreal realms. The stacking pattern of these sequences suggests an orbital control on sedimentation. Small-, medium- and large-scale sequences correspond to precession (20 ky) cycles and to 100 ky and 400 ky eccentricity cycles, respectively. The elementary sequences have durations shorter than 20 ky. The Kimmeridgian was a period of global sea-level rise that ended in the Late Kimmeridgian. More proximal depositional environments in the Rocher d'Yves section (Late Kimmeridgian) than in the Pas section (Early Kimmeridgian) imply a progradation of the La Rochelle platform during the Kimmeridgian. This progradation resulted from a slowdown of the subsidence in the Aquitaine Basin during the Kimmeridgian, corresponding to the first steps of Atlantic Ocean opening. High-frequency cycles on the La Rochelle platform formed in sync with Milankovitch orbital cycles, while tectonics controlled the formation of the low-frequency cycles.     

三峡移民安置区泥灰质岩岩溶风化灾变性分析

三峡移民安置区三叠系巴东组( T2b )泥灰质岩的岩溶风化问题是新近发现的重大工程地质问题。泥灰质岩具有灰岩和泥岩双重特性,在灰质成分遭受溶蚀的同时,泥质成分遭受风化,由此引起岩性的复杂变化,由室内测试得出,深灰色泥质灰岩经岩溶风化后, CaCO3 含量呈降低的趋势, Fe2O3 含量和蒙脱石含量增高,演变为一系列风化岩和残坡积土,包括灰绿色泥灰岩、黄绿色泥灰岩、粉红色钙质泥岩、棕红色钙质泥岩、棕红色泥砾层、黄褐色膨胀土,在深处地下水富集带,泥灰质岩则被溶蚀成为杏黄色泥质条带。随着岩性的变化,岩石的力学强度不断降低、完整性不断弱化,并可能产生普遍的地面不均匀沉降、地裂缝、滑坡、崩塌、泥石流及地面塌陷地质灾害,这些问题必须在移民迁建以及将来城镇运行过程中引起高度重视。      

Geochemical assessment of Paleocene limestones of Sinn El-Kaddab Plateau,South Western Desert of Egypt,for industrial uses

The present work assesses the potential industrial uses of Paleocene limestone deposits, Garra Formation in Sinn El-Kaddab Plateau, South Western Desert of Egypt, based on their mineralogy and geochemical characteristics. Eighty-six limestone samples collected from ten stratigraphic columnar sections were analyzed using X-ray diffraction (XRD) and X-ray fluorescence (XRF) techniques. Petrographically, Garra limestone deposits consist dominantly of benthic foraminiferal wackestone and packstone microfacies. The XRD data revealed dominance of low-Mg calcite as essential carbonate mineral in the studied limestone. The bulk rock XRF results revealed CaO (29.28–55.75%) with an average of 52.74%. The CaO exhibits a strong negative correlation with MgO, SiO₂, TiO₂, Al₂O₃, and moderate negative correlation with Fe₂O₃ which indicates that the contribution of these elements is mainly due to detrital input. On the other hand, Al₂O₃ and Na₂O contents exhibit significant negative correlation with loss of ignition (LOI) wt% indicating their incorporation within terrigenous matrix. The average Sr content attains 1297 ppm indicating deposition in temperate marine environment. The average molar CaCO₃% values of bulk samples have been computed for individual columnar sections to determine the purity status of Garra limestone deposits. They range from impure (CaCO₃%?=?79.92%) to high-pure (CaCO₃%?=?97.76%) limestone. Therefore, Garra limestone deposits have extremely valuable uses in a wide spectrum of industrial applications including Portland cement, steel, ceramics, whiting, chemical uses, paper, and feed stuff.     

Calcareous nannoplankton, planktonic foraminiferal, and carbonate carbon isotope stratigraphy of the Cenomanian–Turonian boundary section in the Ultrahelvetic Zone (Eastern Alps, Upper Austria)

Ultrahelvetic units of the Eastern Alps were deposited on the distal European continental margin of the (Alpine) Tethys. The Rehkogelgraben section (“Buntmergelserie”, Ultrahelvetic unit, Upper Austria) comprises a 5 m thick succession of upper Cenomanian marl-limestone cycles overlain by a black shale interval composed of three black shale layers and carbonate-free claystones, followed by lower Turonian white to light grey marly limestones with thin marl layers. The main biostratigraphic events in the section are the last occurrence of Rotalipora and the first occurrences of Helvetoglobotruncana helvetica and Quadrum gartneri. The thickest black shale horizon has a TOC content of about 5%, with predominantly marine organic matter of kerogen type II. Vitrinite reflectance and Rock-Eval parameter T_max (<424 °C) indicate low maturity. HI values range from 261 to 362 mg HC/g TOC. δ¹³C values of bulk rock carbonates display the well documented positive shift around the black shale interval, allowing correlation of the Rehkogelgraben section with other sections such as the Global Boundary Stratotype Section and Point (GSSP) succession at Pueblo, USA, and reference sections at Eastbourne, UK, and Gubbio, Italy. Sediment accumulation rates at Rehkogelgraben (average 2.5 mm/ka) are significantly lower than those at Pueblo and Eastbourne.     

Application of a two-dimensional electrical tomography technique for investigating landslides along the Amman–Dead Sea highway, Jordan

Electrical tomography geophysical surveys were conducted with the SYSCAL-R2 resistivity instrument at the location of instantaneous rock failure of a few 1,000s m³ along the Amman-Dead Sea highway, Jordan, providing a ground image for investigating landslide sites which caused material damage and closed the road. This slide occurred along two major fault planes after heavy rainfall in a rock consisting of a succession of shale, marl and marly limestone layers which were folded, tilted and fractured. Three electrical tomography profiles were performed along the axis of the slope to assess the landslide risk in such potential unstable areas. The results obtained, based on two-dimensional inversion of field data, have allowed mapping of the shale zones at depths which are characterized by a lower resistivity value, and have demonstrated that the rupture was initiated at the contact between the shale mass (black colored) and the massive limestone (white, yellowish-brown colored).     

陕西韩城寒武纪三叶虫生物地层

陕西韩城寒武系出露良好 ,化石丰富 ,假整合覆盖于厚约 2 0 m的霍山组石英砂岩之上 ,从下寒武统上部至奥陶系为沉积连续。本区寒武系主要以紫色和黄色泥页岩、泥灰岩、灰岩和白云质灰岩为主 ,从下到上可划分为馒头组、毛庄组、徐庄组、张夏组和三山子组。根据在本区寒武系发现的三叶虫化石 ,韩城地区寒武系可划分为 14个生物带 ,自上而下为 :Blackwelderia带 ,Damesella带 ,L iopeishania带 ,Dorpyge richthofeni带 ,Crepicephalina带 ,Manchuriella带 ,Poriagraulos带 ,Inouyops带 ,Sunaspis带 ,H suchuagia带 ,Shantungaspis带 ,Probowmaniella带 ,Weijiaspis带和 Redlichia murakamii带。     

Paleoenvironmental reconstruction based on palynofacies analyses of the Cansona Formation (Late Cretaceous), Sinú-San Jacinto Basin,northwest Colombia

To reconstruct the paleoenvironments of the Cansona Formation, a Cretaceous succession in Colombia that has controversial paleoenvironmental interpretation, occasionally deep marine and occasionally shallow marine, palynofacies analyses were conducted on 93 samples from four sections of the Sinú San Jacinto Basin in the north, midwest, and southwest sectors. For the palynofacies analyses, the kerogen categories were counted and subjected to cluster analyses. Four palynofacies associations were revealed for the four sections: Palynofacies Association I (PA I), which consisted of microforaminiferal linings, scolecodonts, dinoflagellate cysts, pollen grains, and fungi hyphae; PA II, which consisted of phytoclast translucent non-biostructured and biostructured, opaque phytoclasts (equidimensional and lath shaped); PA III, which consisted of pseudoamorphous particles, cuticles, resin, and fungal spores; and PA IV, which consisted of fluorescent and non-fluorescent amorphous organic matter and the fresh-water algae Botryococcus. In contrast to early studies that suggested a generalization of the depositional environment for the Cansona Formation (deep or shallow conditions), this study suggests that the formation reflects conspicuous stratigraphic and lateral changes and hence different depositional environments. The Cerro Cansona (CC4 section) and Chalán (AP section) areas are a more marine proximal settings (Early Campanian-Maastrichtian), and there is an intermediate setting for the Lorica area (SC section) and deeper conditions for the Montería area (CP2 section).     

Orbital calibration of the Early Kimmeridgian (southeastern France): implications for geochronology and sequence stratigraphy

Classic stratigraphic methods rarely provide high‐resolution correlations between intrabasinal sedimentary sequences, which are important to understand the origin of sedimentation process and its environmental change. In this study, we investigate high‐resolution cyclostratigraphic correlation from magnetic susceptibility in two Early Kimmeridgian pelagic marl‐limestone successions, at La Méouge and Châteauneuf‐d'Oze, southeastern France. Spectral analysis reveals the complete suite of orbital frequencies (precession, obliquity, and eccentricity) with the marl‐limestone couplets being primarily precession‐driven. Frequencies detected by the spectral analysis are similar between the sections, but their relative amplitudes are somewhat different, linked to the palaeoenvironmental position and the completeness of the sections. High‐resolution correlation reveals two significant hiatuses at Châteauneuf‐d’Oze. Early Kimmeridgian Platynota, Hypselocyclum, and Divisum ammonite zones were orbitally calibrated for an ultra‐high resolution assessment of geological time. Finally, strong 405‐kyr eccentricity cycles are recorded as third‐order depositional sequences.     

Rhythmic pelagic successions and terrestrial orbital variations. The example of the Lower Cretaceous from Angles (SE France)

An harmonic analysis of limestone bed and marl interbed thicknesses of pelagic Berriasian-Barremian interval from the Angles area (SE France) shows that marly parts of the succession contain frequencies significantly different from calcareous ones. Some of the resulting periods are in the Milankovitch frequency band but many others are different from those predicted by the orbital theory.     

Quantifying a critical marl thickness for vertical fracture extension using field data and numerical experiments

In fractured reservoirs characterized by low matrix permeability,fracture networks control the main fluid flow paths.However,in layered reservoirs,the vertical extension of fractures is often restricted to single layers.In this study,we explored the effect of changing marl/shale thickness on fracture extension using comprehensive field data and numerical modeling.The field data were sampled from coastal exposures of Liassic limestone-marl/shale alternations in Wales and Somerset(Bristol Channel Basin,UK).The vertical fracture traces of more than 4000 fractures were mapped in detail.Six sections were selected to represent a variety of layer thicknesses.Besides the field data also thin sections were analyzed.Numerical models of fracture extension in a two-layer limestone-marl system were based on field data and laboratory measurements of Young's moduli.The modeled principal stress magnitude σ_3 along the lithological contact was used as an indication for fracture extension through marls.Field data exhibit good correlation(R~2=0.76) between fracture extension and marl thickness,the thicker the marl layer the fewer fractures propagate through.The model results show that almost no tensile stress reaches the top of the marl layer when the marls are thicker than 30 cm.For marls that are less than 20 cm,the propagation of stress is more dependent on the stiffness of the marls.The higher the contrast between limestone and marl stiffness the lower the stress that is transmitted into the marl layer.In both model experiments and field data the critical marl thickness for fracture extension is ca.15-20 cm.This quantification of critical marl thicknesses can be used to improve predictions of fracture networks and permeability in layered rocks.Up-or downsampling methods often ignore spatially continuous impermeable layers with thicknesses that are under the detection limit of seismic data.However,ignoring these layers can lead to overestimates of the overall permeability.Therefore,the understanding of how fractures propagate and terminate through impermeable layers will help to improve the characterization of conventional reservoirs.     

ASTER mapping of limestone formations and study of caves, springs and depressions in parts of Sultanate of Oman

Caves, springs, and large depressions of limestone karst formations are becoming more attractive tourist places and have potential importance on socio-economic development. The present study is a multi-scale point of view on limestone karst, from the space images to microscopic fabric. Here, the karst features consist of limestone formations of Cretaceous (Albian–Cenomanian) age of Tanuf Valley and Tertiary (Late Paleocene–Middle Eocene) age of Sur region of parts of Sultanate of Oman which are mapped in the visible near-infrared and shortwave infrared spectral bands of advanced spaceborne thermal emission and reflection radiometer (ASTER) using decorrelated stretch image processing technique and the occurrences of caves, springs, and depressions of the formations in the field were studied. The decorrelated RGB images of ASTER spectral bands 8, 3, and 1 discriminated well the limestone formations and associated lithology. The limestone formations of Tanuf valley (Natih formations of Hajar unit) are thick-bedded, massive, shallow marine limestone and clayey limestone, which have caves and springs. Large depressions are studied as collapsed structures at the boundary between Abat formations; they consist of gray to white marly or micritic limestone with chert nodules and Seeb Formation of bioclastic limestone, calcarenite, marl, and sandstone of Sur region. Interpretations of limestone formations, their occurrences and distributions of caves, springs and depressions of these regions are verified and confirmed in the field and studied in the laboratory. Occurrences of more springs and depressions in the limestone formations of the study sites are interpreted and located on the Google Earth image. The study proved the capability of ASTER sensor in mapping of limestone formations and recommends the technique to other geographical regions where similar geological questions need to be resolved.     

Sedimentary organic matter and source rock potential of the Paleocene Aaliji Formation in Qumar Oil Field,NE Iraq

The organic matter content of the Paleocene Aaliji Formation has been studied from the Qm-1 well in the Qumar Oil Field, NE Iraq. A palynofacies analysis revealed the obvious domination of amorphous organic matter (AOM) in the samples studied in addition to the different ratios of palynomorphs, phytoclasts and opaque organic material. The deposition of the various percentages of organic matter components and types of palynomorphs appear to have occurred in a proximal suboxic–anoxic basinal environment. The samples analysed showed relatively low percentages of total organic carbon, indicating a generally poor source rock. The thermal alteration index for the palynomorphs (dinoflagellates) observed and identified ranged between 2, 2+ and 3?, indicating an immature to early stage of maturity for the section studied. No clear differentiation between the stages of maturity within the section was identified. The reflectance measured for a few vitrinite particles at a depth of 2,900 m showed uncertainly of 0.46 % Ro, indicating a still thermally immature stage. The values obtained from pyrolysis analysis also supported the formation being in the early stages of maturity, i.e. an immature condition, with T _max values between 416 and 435 °C. The quality of the organic matter examined and analysed appeared to be mostly type III gas-prone kerogen, as discerned from the hydrogen index, oxygen index and other pyrolysis parameters. The parameters obtained and calculated from gas chromatography analysis performed on a sample at a depth of 2,900 m found marginally mature marine source organic matter.