Growth patterns and implications of complex dendrites in calcite travertines from Lýsuhóll, Snæfellsnes, Iceland

Calcite dendrite crystals are important but poorly understood components of calcite travertine that forms around many hot springs. The Lýsuhóll hot-spring deposits, located in western Iceland, are formed primarily of siliceous sinters that were precipitated around numerous springs that are now inactive. Calcite travertine formed around the vent and on the discharge apron of one of the springs at the northern edge of the area. The travertine is formed largely of two types (I and II) of complex calcite dendrite crystals, up to 1 cm high, that grew through the gradual addition of trilete sub-crystals. The morphology of the dendrite crystals was controlled by flow direction and the competition for growth space with neighbouring crystals. Densely crowded dendrites with limited branching characterize the rimstone dams whereas widely spaced dendrites with open branching are found in the pools. Many dendrite bushes in the pools nucleated around plant stems. Growth of the dendrite crystals was seasonal and incremental. Calcite precipitation was driven by rapid CO₂ degassing of CO₂-rich spring waters during the spring and summer. During winter, when snow covered the ground and temperatures were low, opal-A precipitated on the exposed surfaces of the dendrites. Segmentation of dendrite branches by discontinuities coated with opal-A and overgrowth development around sub-crystals resulted from this seasonal growth cycle. The calcite dendrite crystals in the Lýsuhóll travertine differ in morphology from those at other hot springs, such as those at Lake Bogoria, Kenya, and Waikite in New Zealand. Comparison with the calcite dendrite crystals found at those sites shows that dendrite morphology is site-specific and probably controlled by carbonate saturation levels that, in turn, are controlled by the rate of CO₂ degassing and location in the spring outflow system.     

Sedimentology of Quaternary perched springline and paludal tufas: criteria for recognition, with examples from Guadalajara Province, Spain

Outcrop‐scale geometries and bed relationships of ambient temperature freshwater carbonates are poorly understood because many described tufas have been dismantled by erosion and present only part of a particular depositional model. At the field scale, four end‐member models encompass the tufa continuum: (1) perched springline; (2) paludal; (3) fluvial; and (4) lacustrine tufas. Individual bed types can occur with variable dominance within several of these models, but one or more beds are characteristically dominant only within a single tufa model, so it can be differentiated from relatively isolated outcrop fragments. Two models (perched springline tufas and paludal tufas) are known in outline only in the literature despite being present within the Quaternary deposits of most karstic regions. Perched springline tufas generally form lobate, fan‐shaped mound morphologies on hillslopes and develop from single or multiple spring resurgences. Mature deposits show a subhorizontal top and a steep face on the downflow side. The steep outer zones of tufa mounds may be developed into cascades with moss curtains or can be dominated by shallow rimstone pools according to face angle. Tufa deposits lying downslope of the mounds are usually detrital in nature, especially if some dismantling of the mound has occurred. The relatively thin subhorizontal lobe‐top deposits commonly contain organic‐rich deposits. Paludal tufas develop predominantly in waterlogged valley bottom situations, where line‐sourced waters emerge from valley side and bottom aquifers. Lime mud precipitation predominates in these sites. Mud is deposited as subhorizontal laminites that thin towards the valley axis and downstream of resurgences. Tufa spring‐mounds may form where lesser volumes of water are involved. Individual tussocks (phytoherm cushions) of grasses and rushes are the most diagnostic feature of the model, but sapropels and peats may be intercalated. Diagenesis in both models is rapid. Lithification of individual beds is virtually instantaneous and always occurs before the decay of the associated living vegetation. The resulting highly porous and permeable fabrics remain fresh in Holocene tufas, but aggrading neomorphism and partial spar infill of vegetation moulds is common in older deposits. Dissolution in many perched springline tufas is small scale. Many large cavities are primary, but with later coatings of speleothems. Early removal of organics from paludal tufas is responsible for autobrecciation and differential compaction.     

Genesis of monazite and Y zoning in garnet from the Black Hills, South Dakota

The paragenesis of monazite in metapelitic rocks from the contact aureole of the Harney Peak Granite, Black Hills, South Dakota, was investigated using zoning patterns of monazite and garnet, electron microprobe dating of monazite, bulk-rock compositions, and major phase mineral equilibria. The area is characterized by low-pressure and high-temperature metamorphism with metamorphic zones ranging from garnet to sillimanite zones. Garnet porphyroblasts containing euhedral Y annuli are observed from the garnet to sillimanite zones. Although major phase mineral equilibria predict resorption of garnet at the staurolite isograd and regrowth at the andalusite isograd, textural and mass balance analyses suggest that the formation of the Y annuli is not related to the resorption-and-regrowth of garnet having formed instead during garnet growth in the garnet zone. Monazite grains in Black Hills pelites were divided into two generations on the basis of zoning patterns of Y and U: monazite 1 with low-Y and -U and monazite 2 with high-Y and -U. Monazite 1 occurs in the garnet zone and persists into the sillimanite zone as cores shielded by monazite 2 which starts to form in the andalusite zone. Pelites containing garnet porphyroblasts with Y annuli and monazite 1 with patchy Th zoning are more calcic than those with garnet with no Y annuli and monazite with concentric Th zoning. Monazite 1 is attributed to breakdown of allanite in the garnet zone, additionally giving rise to the Y annuli observed in garnet. Monazite 2 grows in the andalusite zone, probably at the expense of garnet and monazite 1 in the andalusite and sillimanite zones. The ages of the two different generations of monazite are within the precision of chemical dating of electron microprobe. The electron microprobe ages of all monazites from the Black Hills show a single ca. 1713 Ma population, close to the intrusion age of the Harney Peak Granite (1715 Ma). This study demonstrates that Y zoning in garnet and monazite are critical to the interpretation of monazite petrogenesis and therefore monazite ages.     

Petrologic and geochemical links between the post-collisional Proterozoic Harney Peak leucogranite, South Dakota, USA, and its source rocks

The Proterozoic terrane of the Black Hills, South Dakota, includes the composite Harney Peak leucogranite and associated pegmatites that were emplaced into metamorphosed pelites and graywackes. Available dates indicate that granite generation post-dated regional metamorphism and deformation that have been attributed to collision of the Wyoming and Superior cratons at 1760 Ma. Previous radiogenic and stable isotope work indicates that the exposed metasedimentary rocks are equivalent to sources of the leucogranites. In this study, whole rock and mineral compositions of the metasedimentary rocks were used to calculate the likely average residue mineralogies and melt fractions that would be generated by muscovite dehydration melting of the rocks. These were then used to model observed trace element compositions of the granites using published mineral/melt distribution coefficients. Model trace element melt compositions using pelitic and graywacke protoliths yield similar results.

The models reproduce well the observed depletion of transition metals and Ba in the granites relative to metasedimentary protoliths. The depletion is due mainly to high proportion of biotite with variable amounts of K-feldspar in the model residue. Sr is also depleted in the granites compared to source rocks, but to a lesser relative extent than Ba. This is because of the low biotite/melt distribution coefficient for Sr and because high proportion of plagioclase in the residue is compensated by high Sr concentrations in protoliths. Rubidium, Cs and Ta behaved as slightly compatible to incompatible elements, and therefore, were not strongly fractionated during melting. Of the considered elements, only B appears to have been highly incompatible relative to residue during melting. The protoliths had sufficient B to allow tourmaline crystallization in those parts of the Harney Peak Granite in which Ti concentration was sufficiently low not to enhance crystallization of biotite.

The reproducibility of observed trace element concentrations in the Harney Peak Granite by the models supports the often made proposition that metapelites and metagraywackes are common sources for leucogranites. This argues against mass input from the mantle into metagraywacke and metapelitic crustal sources or melting of amphibolites to generate the post-collisional Harney Peak and other similar peraluminous granite suites.     

U–Pb ages of Neoarchean granitoids from the Black Hills, South Dakota, USA: implications for crustal evolution in the Archean Wyoming province

Zircons in basement rocks from the eastern Wyoming province (Black Hills, South Dakota, USA) have been analyzed by ion microprobe (SHRIMP) in order to determine precise ages of Archean tectonomagmatic events. In the northern Black Hills (NBH) near Nemo, Phanerozoic and Proterozoic (meta)sedimentary rocks are nonconformably underlain by Archean biotite–feldspar gneiss (BFG) and Little Elk gneissic granite (LEG), both of which intrude older schists. The Archean granitoid gneisses exhibit a pervasive NW–SE-trending fabric, whereas an earlier NE–SW-trending fabric occurs sporadically only in the BFG, which is intruded by the somewhat younger LEG. Zircon crystals obtained from the LEG and BFG exhibit double terminations, oscillatory zoning, and Th/U ratios of 0.6±0.3—thereby confirming a magmatic origin for both lithologies. In situ analysis of the most U–Pb concordant domains yields equivalent ²⁰⁷Pb/²⁰⁶Pb ages (upper intercept, U–Pb concordia) of 2559±6 and 2563±6 Ma (both ±2σ) for the LEG and BFG, respectively, which constrains a late Neoarchean age for sequential pulses of magmatism in the NBH. Unzoned (in BSE) patches of 2560 Ma zircon commonly truncate coeval zonation in the same crystals with no change in Th/U ratio, suggesting that deuteric, fluid-assisted recrystallization accompanied post-magmatic cooling. A xenocrystic core of magmatic zircon observed in one LEG zircon yields a concordant age of 2894±6 Ma (±2σ). This xenocryst represents the oldest crustal material reported thus far in the Black Hills. Whether this older zircon originated as unmelted residue of 2900 Ma crust that potentially underlies the Black Hills or as detritus derived from 2900 Ma crustal sources in the Wyoming province cannot be discerned. In the southern Black Hills (SBH), the peraluminous granite at Bear Mountain (BMG) of previously unknown age intrudes biotite–plagioclase schist. Zircon crystals from the BMG are highly metamict and altered, but locally preserve small domains suitable for in situ analysis. A U–Pb concordia upper intercept age of 2596±11 Ma (±2σ) obtained for zircon confirms both the late Neoarchean magmatic age of the BMG and a minimum age for the schist it intrudes. Taken together, these data indicate that the Neoarchean basement granitoids were emplaced at 2590–2600 Ma (SBH) and 2560 Ma (NBH), most likely in response to subduction associated with plate convergence (final assembly of supercontinent Kenorland?). In contrast, thin rims present on some LEG–BFG zircons exhibit strong U–Pb discordance, high common Pb, and low Th/U ratios—suggesting growth or modification under hydrothermal conditions, as previously suggested for similar zircons from SE Wyoming. The LEG–BFG zircon rims yield a nominal upper intercept date of 1940–2180 Ma, which may represent a composite of multiple rifting events known to have affected the Nemo area between 2480 and 1960 Ma. Together, these observations confirm the existence of a Paleoproterozoic rift margin along the easternmost Wyoming craton. Moreover, the 2480–1960 Ma time frame inferred for rifting in the Black Hills (Nemo area) corresponds closely to a 2450–2100 Ma time frame previously inferred for the fragmentation of supercontinent Kenorland.     

Osteichthyans from the Fairpoint Member of the Fox Hills Formation (Maastrichtian), Meade County, South Dakota, USA

The Fairpoint Member of the Fox Hills Formation (upper Maastrichtian) in Meade County, South Dakota, USA, contains an osteichthyan assemblage indicative of transitional to marine shoreface deposits. The fauna consists of: Lepisosteus sp., Paralbula casei, Cylindracanthus cf. C. ornatus, Enchodus gladiolus, Hadrodus sp., and indeterminate osteichthyans with probable affinities to the Siluriformes and Beryciformes. The Fairpoint fauna is of limited species diversity and in this character mirrors many other Upper Cretaceous North American osteichthyan assemblages. Comparison to Upper Cretaceous chondrichthyan diversity and consideration of the structure of Cretaceous marine food webs suggest that osteichthyans are strongly under-represented in the Upper Cretaceous of North America. The small size and poor preservation potential of many Upper Cretaceous North American osteichthyans probably account for much of this observed paucity. Fairpoint osteichthyans are members of families that survive the Cretaceous–Paleocene boundary extinction event. Some of these genera and families are still extant and occur in a wide array of modern fresh, brackish, and shallow marine environments.     

Petrography and textural development of inorganic and biogenic lithotypes in a relict barite tufa deposit at Flybye Springs, NT, Canada

A relict mound of Holocene barite (BaSO₄) tufa underlies the Flybye Springs, a small, barium‐rich, cold sulphur spring system in the Northwest Territories of Canada. The tufa is composed of relatively pure barite with ≤0·34 wt% Ca²⁺ and ≤0·77 wt% Sr²⁺. The mound is made up of coated bubble, raft, undulatory sheet, stromatolitic, coated grain and detrital conglomerate barite tufa. Although previously unreported in barite, these lithotypes are akin to facies found in many carbonate spring deposits. Raft and ooid‐coated grain tufa was formed via ‘inorganic’ barite precipitation in spring water ponds and tributaries where rapid oxidation of sulphide to sulphate established barite supersaturation. Undulatory sheet tufa may have formed by the reaction of dissolved barium with sulphate derived from the oxidation of extracellular polysaccharide‐rich colloidal sulphur films floating in oxygenated, barite‐saturated spring water ponds. Coated bubble, oncoid‐coated grain and stromatolitic tufa with filamentous microfossils was formed in close association with sulphur‐tolerant microbes inhabiting dysoxic and oxygenated spring water tributaries and ponds. Adsorption of dissolved barium to microbial extracellular polysaccharide probably facilitated the development of these ‘biogenic’ lithotypes. Detrital conglomerate tufa was formed by barite cementation of microdetrital tufa, allochthonous lithoclasts and organic detritus, including caribou hair. Biogenic textures, organic artefacts and microfossils in the Flybye barite tufa have survived diagenetic aggradational recrystallization and precipitation of secondary cements, indicating the potential for palaeoecological information to be preserved in barite in the geological record. Similarities between the Flybye barite tufa and carbonate spring deposits demonstrate that analogous textures can develop in chemical sedimentary systems with distinct mineralogy, biology and physiochemistry.     

Searching for travertines, calcretes and speleothems in deep time: Processes, appearances, predictions and the impact of plants

Common models for modern calcite precipitation in and around caves, soils, springs and streams involve CO₂ supplied by thick, high pCO₂ biogenic soils which were probably thin or non-existent before vascular plants. Indeed plant-influenced chemical weathering might have caused accelerated terrestrial carbonate production from the Devonian onwards. However terrestrial carbonates have also been documented from the Archaean, Proterozoic, Cambrian, Ordovician and Silurian. Mechanisms which could have caused non-marine carbonates to precipitate without organic-rich soils are described, and some geological events likely to have influenced non-marine carbonate precipitation up to the origin of vascular plants are highlighted. As organisms have evolved, so have the petrographic characteristics of non-marine carbonates; some examples of this are also given here.     

Sedimentological and palaeohydrological characterization of Late Pleistocene and Holocene tufa mound palaeolakes using trenching methods in the Spanish Pyrenees

Lakes developed in the inner depressions of tufa mounds are rare geomorphic features and still poorly understood. Sedimentation in this unusual type of endorheic lake with a very restricted catchment area is highly sensitive to environmental and hydrological changes. The Isona tufa mound complex, north‐eastern Iberian Peninsula, is associated with the discharge zone of a confined artesian aquifer and comprises 11 tufa mounds consisting of an annular rimstone enclosing a central depression filled with lake deposits. Data gathered from trenches excavated in four palaeolakes located within three different morphostratigraphic units permitted a precise analysis of the geometrical characteristics and stratigraphic relationships of the deposits and provided a sedimentation model for the Late Quaternary infilling of the spring‐fed lakes. The work illustrates that trenches allow a precise characterization of the stratigraphic arrangements, lateral facies changes and deformation structures, which are not apparent in studies relying solely on borehole records, and facilitate sampling for dating and geochemical analyses. The five sedimentary facies described represent different evolutionary stages of the lakes, including: (i) carbonate‐rich palustrine deposits probably related to periods with strong hydrological seasonality; (ii) massive highly bioturbated organic ooze; (iii) banded organic carbonate‐rich facies associated with an increase in the regional effective moisture; (iv) fine‐grained quartz‐rich aeolian/slope‐wash sediments; and (v) colluvial facies deposited following the desiccation of the lakes located at higher altitudes. Geochemical and sedimentological analyses of the lacustrine sequences provided information on the palaeohydrological evolution of the Isona tufa mound complex and the palaeoenvironmental conditions of the area over the last 28 ka. Radiometric dating suggests that deposition occurred simultaneously at ca 22 ka in palaeolakes situated at different elevations. A drop in the piezometric level prompted by the opening of springs at lower altitudes probably caused the deactivation of the upper springs and the desiccation of the lakes. Arid conditions prevailed in the area during the Late Glacial and the early Holocene (28·0 to 8·5 ka bp ). More humid conditions recorded from 8·5 to 4·2 ka and again since 1·7 ka are in accordance with palaeoenvironmental reconstructions available in the Western Mediterranean since the Last Glacial Maximum.     

The initial garnet‐in reaction involving siderite–rhodochrosite,garnet re‐equilibration and P–T–t paths of graphitic schists in the Black Hills orogen,South Dakota,USA

It is generally thought that garnet in metapelites is produced by continuous reactions involving chlorite or chloritoid. Recent publications have suggested that the equilibrium temperatures of garnet‐in reactions may be significantly overstepped in regionally metamorphosed terranes. The growth of small spessartine–almandine garnet crystals on Mn‐siderite at the garnet isograd in graphitic metapelites in the Proterozoic Black Hills orogen, South Dakota, demonstrates that Mn‐siderite was the principal reactant that produced the initial garnet in the schists. Moreover, the positions of garnet compositions in isobaric, T–(C/H) pseudosections for the schists show that the temperature of the garnet‐in reaction from Mn‐siderite was overstepped minimally at the most. In the Black Hills, garnet was initially produced during regional metamorphism beginning at c. 1755 Ma due to the collision of Wyoming and Superior cratons, and was subsequently partially or fully re‐equilibrated at more elevated temperatures and pressures during intrusion of the Harney Peak Granite (HPG) at c. 1715 Ma. Garnet occurs in graphitic schists in garnet, staurolite and sillimanite zones, the latter being a product of contact metamorphism by HPG. During metamorphism, coexisting fluid contained both CO₂ and CH₄. In the garnet zone, garnet crystals contain petrographically distinct cores with inclusions of quartz, graphite and other minerals. Centres of the cores have distinctly elevated Y concentrations that mark the positions of garnet nucleation. The elevated Y is thought to have come from the Mn‐siderite onto which Y was probably absorbed during precipitation in an ocean. In the upper garnet and staurolite zones, the cores were overgrown by inclusion‐poor mantles. Mantles are highly zoned and have more elevated Fe and Mg and lower Mn and Ca than cores. The growth of mantles is attributed to late‐orogenic heating by leucogranite magmas and attendant influx of H₂O that caused consumption of graphite in rock matrices. A portion of the Proterozoic terrane that includes the HPG is surrounded by four large faults. In this ‘HPG block’, garnet is inclusion‐poor and its composition does not preserve its early growth history. This garnet appears to have re‐equilibrated by internal diffusion of its major components and/or recrystallization of an earlier inclusion‐rich garnet. It has equilibrated within the kyanite stability range, and together with remnant kyanite in the high‐strain aureole of the HPG, indicates that the HPG block had a ≥6 kbar history. The HPG block has undergone decompression during emplacement of the HPG. The decompression is evident in occurrences of retrograde andalusite and cordierite in the thermal aureole of the HPG. The data support a polybaric metamorphic history of the Black Hills orogen with different segments of the orogen having their own clockwise P–T–t paths.     

U/Th dating of fissure ridge travertines from the Kirsehir region (Central Anatolia Turkey): structural relations and implications for the Neotectonic development of the Anatolian block

Travertines exposed in several locations in Central Anatolia are the important lithological product for the interpretation of local neotectonics. The fissure-type travertines provide significant information about stress orientation during deposition. Two travertine masses cropping out in the Kirsehir region have been studied and dated by the U-series method to obtain new chronological constraints, determine dilation rates and contribute to studies on the recent tectonic evolution of the area. The Kusdili and Kayabasi travertine masses are located on the hanging wall of the Kirsehir Fault, similar to numerous fissure ridge banded travertine deposits which are inactive today in the region. While individual fissures of the Kusdili travertine mass (Late Pleistocene-Holocene) have been dilated at rates of between 0.303 and 0.386 mm yr–1 during deposition, the Kayabasi travertine mass (Late Pleistocene) produced measured dilation rates of between 0.136 and 0.187 mm yr–1. The central fissures, filled by banded travertine, roughly follow the ridge crests. While the ridge crest has a NNE-SSW trend in the Kayabasi travertine mass, the ridge crest of the Kusdili travertine mass shows a NE-SW trend. This difference may be related to the clockwise rotation of the stress tensors from Late Pleistocene to Late Pleistocene-Holocene in the region.     

Recognition and significance of sharp‐based mouth‐bar deposits in the Eocene Green River Formation,Uinta Basin,Utah

Sandstone bodies in the Sunnyside Delta Interval of the Eocene Green River Formation, Uinta Basin, previously considered as point bars formed in meandering rivers and other types of fluvial bars, are herein interpreted as delta mouth‐bar deposits. The sandstone bodies have been examined in a 2300 m long cliff section along the Argyle and Nine Mile Canyons at the southern margin of the Uinta lake basin. The sandstone bodies occur in three stratigraphic intervals, separated by lacustrine mudstone and limestone. Together these stratigraphic intervals form a regressive‐transgressive sequence. Individual sandstone bodies are texturally sharp‐based towards mudstone substratum. In proximal parts, the mouth‐bar deposits only contain sandstone, whereas in frontal and lateral positions mudstone drapes separate mouth‐bar clinothems. The clinothems pass gradually into greenish‐grey lacustrine mudstone at their toes. Horizontally bedded or laminated lacustrine mudstone onlaps the convex‐upward sandstone bars. The mouth‐bar deposits are connected to terminal distributary channel deposits. Together, these mouth‐bar/channel sandstone bodies accumulated from unidirectional jet flow during three stages of delta advance, separated by lacustrine flooding intervals. Key criteria to distinguish the mouth‐bar deposits from fluvial point bar deposits are: (i) geometry; (ii) bounding contacts; (iii) internal structure; (iv) palaeocurrent orientations; and (v) the genetic association of the deposits with lacustrine mudstone and limestone.     

新疆库车盆地富钾盐泉水化学特征与成钾显示

库车盆地古近系—新近系发育一套巨厚的膏岩盐层,钻探勘查显示,在拜城凹陷南缘5100 m深古近系库姆格列木群地层中发现钾石盐矿物。本研究采集并分析了多件盐泉水化学组成,结果显示7件盐泉水矿化度在117.7～299.4 g/L之间,钾含量在15.25～45.68 g/L之间,明显富钾,是以往报道数据(低于1 g/L)的几十倍,属于新疆首次发现。根据水化学分类,富钾盐泉水以氯化物型水为主,是Ca-Cl型卤泉水;水化学特征系数表明泉水具有高K×10~3/Cl和nK/nBr值、低的nMg/nCl和Br×10~3/Cl值(nCl~-=nNa~++nK~+)特征。同时,盐泉水均落在25℃Na~+, K~+,Mg~(2+)//Cl~-,SO■-H_2O五元水盐体系钾石盐相区,说明盐泉水可能溶滤了地层中的钾石盐,且受强烈构造挤压,沿地层断裂带或裂隙通道出露地表。库车盆地富钾盐泉水的发现,是新疆库车盆地含盐系地层存在固体钾盐的初步证据,对钾盐勘查的重点远景区具有重要的指示意义。     

Variable-discharge-river macroforms in the Sunnyside Delta Interval of the Eocene Green River Formation,Uinta Basin,USA

An outcrop dataset from the early Eocene Sunnyside Delta Interval of the Green River Formation in the Uinta Basin, Utah, USA, documents alluvial channel lithosomes. The abundance of Froude supercritical-flow sedimentary structures, together with an abundance of high-deposition-rate sedimentary structures, in-channel bioturbation and pedogenic modification, in-channel muds and thick soft-clast conglomerates, identify these lithosomes as deposits of variable-discharge rivers. These recognition criteria are part of an emerging facies model for variable-discharge rivers. This facies model, however, yet lacks robust recognition criteria for macro-scale or bar-scale stratal patterns of variable-discharge rivers. This study presents a dataset that corroborates some known stratal patterns and provides examples of hitherto unknown bar-scale stratal patterns of variable-discharge rivers, including: (i) low-angle downstream-accretion sets that may form as washed-out sheets in high sediment supply conditions or downstream of hydraulic jumps; (ii) high-angle upstream-accretion sets that imply deposition from systematically upstream-migrating channel-scale hydraulic jumps (cyclic steps); (iii) concave-up, upward-flattening high-angle downstream-accretion sets that are consistent with aggradation in channel-scale hydraulic-jump scours; (iv) upstream-accretion and lateral-accretion sets that may be linked to high-magnitude flood reworking of point bars; and (v) aggradation or vertical-accretion sets of ambiguous origin. These unconventional stratal patterns are compared to the established bar strata, such as those formed by point bars and braid bars and a discussion is provided on formative conditions for the here documented unconventional strata. This work highlights a need for further studies on the effect of discharge variability on bar formation and on the link between river morphology and bar types.     

Counter point bar deposits: lithofacies and reservoir significance in the meandering modern Peace River and ancient McMurray Formation, Alberta, Canada

Counter point bar deposits in the meandering Peace River, North‐central Alberta, Wood Buffalo National Park, are distinct from point bar deposits in terms of morphology, lithofacies and reservoir potential for fluids. Previously referred to as the distal‐most parts of point bars, point bar tails and concave bank‐bench deposits, counter point bar deposits have concave morphological scroll patterns rather than convex as with point bars. The Peace is a large river (bankfull discharge 11 700 m³ sec^?1, width 375 to 700 m, depth 15 m, gradient 0·00004 or 4 cm km^?1) in which counter point bar deposits are dominated by silt (80% to 90%), which contrasts with sand‐dominant (90% to 100%) point bar deposits. Beginning at the meander inflection (transition from convex to concave), counter point bar deposit stratigraphy thickens as a wedge‐like architecture in the distal direction until the deposit is nearly as thick as the point bar deposits. The low permeability silt‐dominant lithofacies in counter point bar deposits will limit reservoir extent and movement of fluids in both modern and ancient subsurface fluvial deposits. In the exploration and extraction of bitumen and heavy oil in subsurface fluvial rocks, identification and mapping of reservoir potential of point bar deposits and counter point bar deposits is now possible in the fluvial‐dominated tidal estuarine Lower Cretaceous Middle McMurray Formation, North‐east Alberta. Recent geophysical advances have facilitated imaging of some ancient buried point bar deposits and counter point bar deposits which, on the basis of morphological shape of sedimentary bodies observed from seismic amplitude, can be interpreted and mapped as depositional elements or blocks that contain associated sandstone or siltstone dominant lithofacies, respectively. As counter point bar deposits exhibit poor permeability and thus limit reservoir potential for water, natural gas, light crude, heavy oil and bitumen, counter point bar deposits should be avoided in resource developments. Geophysical imaging, interpretation and mapping of point bar deposit and counter point bar deposit elements provide new opportunities to improve recovery of bitumen and heavy oil and reduce development costs in subsurface cyclic steam stimulation and steam‐assisted gravity drainage projects by not drilling into counter point bar deposits.     

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.     

The time-space distribution of Eocene to Miocene magmatism in the central Peruvian polymetallic province and its metallogenetic implications

Eocene to late Miocene magmatism in the central Peruvian high-plain (approx. between Cerro de Pasco and Huancayo; Lats. 10.2–12°S) and east of the Cordillera Occidental is represented by scattered shallow-level intrusions as well as subaerial domes and volcanic deposits. These igneous rocks are calc-alkalic and range from basalt to rhyolite in composition, and many of them are spatially, temporally and, by inference, genetically associated with varied styles of major polymetallic mineralization. Forty-four new ⁴⁰Ar–³⁹Ar and three U/Pb zircon dates are presented, many for previously undated intrusions. Our new time constraints together with data from the literature now cover most of the Cenozoic igneous rocks of this Andean segment and provide foundation for geodynamic and metallogenetic research.The oldest Cenozoic bodies are of Eocene age and include dacitic domes to the west of Cerro de Pasco with ages ranging from 38.5 to 33.5 Ma. South of the Domo de Yauli structural dome, Eocene igneous rocks occur some 15 km east of the Cordillera Occidental and include a 39.34 ± 0.28 Ma granodioritic intrusion and a 40.14 ± 0.61 Ma rhyolite sill, whereas several diorite stocks were emplaced between 36 and 33 Ma. Eocene mineralization is restricted to the Quicay high-sulfidation epithermal deposit some 10 km to the west of Cerro de Pasco.Igneous activity in the earliest Oligocene was concentrated up to 70 km east of the Cordillera Occidental and is represented by a number of granodioritic intrusions in the Milpo–Atacocha area. Relatively voluminous early Oligocene dacitic to andesitic volcanism gave rise to the Astabamba Formation to the southeast of Domo de Yauli. Some stocks at Milpo and Atacocha generated important Zn–Pb (–Ag) skarn mineralization. After about 29.3 Ma, magmatism ceased throughout the study region. Late Oligocene igneous activity was restricted to andesitic and dacitic volcanic deposits and intrusions around Uchucchacua (approx. 25 Ma) and felsic rocks west of Tarma (21–20 Ma). A relationship between the Oligocene intrusions and polymetallic mineralization at Uchucchacua is possible, but evidence remains inconclusive.Widespread magmatism resumed in the middle Miocene and includes large igneous complexes in the Cordillera Occidental to the south of Domo de Yauli, and smaller scattered intrusive centers to the north thereof. Ore deposits of modest size are widely associated with middle Miocene intrusions along the Cordillera Occidental, north of Domo de Yauli. However, small volcanic centers were also active up to 50 km east of the continental divide and include dacitic dikes and domes, spatially associated with major base and precious metal mineralization at Cerro de Pasco and Colquijirca. Basaltic volcanism (14.54 ± 0.49 Ma) is locally observed in the back-arc domain south of Domo de Yauli approximately 30 km east of the Cordillera Occidental.After about 10 Ma intrusive activity decreased throughout Central Perú and ceased between 6 and 5 Ma. Late Miocene magmatism was locally related to important mineralization including San Cristobal (Domo de Yauli), Huarón and Yauricocha.Overall, there is no evidence for a systematic eastward migration of the magmatic arc through time. The arc broadened in the late Eocene to early Oligocene, and thereafter ceased over wide areas until the early Miocene, when magmatism resumed in a narrow arc. A renewed widening and subsequent cessation of the arc occurred in the late middle and late Miocene. The pattern of magmatism probably reflects two cycles of flattening of the subduction in the Oligocene and late Miocene. Contrasting crustal architecture between areas south and north of Domo de Yauli probably account for the differences in the temporal and aerial distribution of magmatism in these areas.Ore deposits are most abundant between Domo de Yauli and Cerro de Pasco and were generally emplaced in the middle and late Miocene during the transition to flat subduction and prior to cessation of the arc. Eocene to early Oligocene mineralization also occurred, but was restricted to a broad east–west corridor from Uchucchacua to Milpo–Atacocha, indicating a major upper-plate metallogenetic control.     

Tectono-stratigraphic evolution and hydrocarbon exploration in the Eocene Southern Lufeng Depression,Pearl River Mouth Basin,South China Sea

The structural evolution and stratigraphic architecture of the Southern Lufeng Depression in the Pearl River Mouth Basin, South China Sea show two second-order sequences (SSQ1 and SSQ2) and nine third-order sequences (WSQ1-5 and ESQ1-4) within the Eocene rift-related successions. Based on integrated interpretations of seismic reflections, well logs and core data, five distinct tectono-stratigraphic patterns are identified: (1) the initial synrift-I sequence (WSQ1) of low tectonic subsidence, overfilled by alluvial fan or fan-delta deposits and volcanic deposits, with no clear systems tracts; (2) the climax synrift-I sequences (WSQ2–4) developed in response to rapid tectonic subsidence, generally consisting of a low-stand systems tract (LST), transgressive systems tract (TST) and high-stand systems tract (HST); (3) the late synrift-I sequence (WSQ5) characterised by a decreased tectonic subsidence rate, dominated by braided delta, deep and shallow lacustrine sediments, mainly constructed by TST and HST; (4) the early synrift-II sequences (ESQ1–2) rapidly filled by braided deltaic sandstone and mainly composed of TST and HST with less common LST units; and (5) the late synrift-II sequences (ESQ3–4), which are totally filled by braided deltaic system in a shallow-water lake setting, presenting typical imbricate clinoforms or sub-parallel seismic configurations, consisting of only TST and HST components. During the climax stage of synrift-I development, the depositional setting changed from a prominent shallow lake (WSQ2) to a deep-lucustrine with turbiditic deposits (WSQ3) and finally dominated by mostly braided deltaic-shallow lacustrine deposits (WSQ4); the HST occupies an increasing proportion from early to late. Furthermore, the stratigraphic patterns, especially LST units of the climax synrift-I stage, are significantly influenced by topographic variations and slope-break belt types in the hanging dip-slope. This study reveals that the spatial and temporal evolution of lacustrine depositional and stratigraphic patterns were significantly controlled by the interplay of tectonic subsidence and sediment supply, and provides a fundamental basis for predicting the favourable reservoirs and geometry of source rocks related to the general variability of Eocene rift-related tectonic subsidence in the Southern Lufeng Depression of the Pearl River Mouth Basin. Furthermore, the topographic responses of differential active fault-stepped patterns associated with magma intrusions, highlight the variability of relevant sequence architectures in the hanging dip-slope in lacustrine rift basins.     

岷江上游叠溪混杂堆积体的沉积特征及其成因分析

青藏高原东缘岷江上游叠溪河谷段在地质历史时期发生了一次大规模滑坡堵江事件,形成一个特大型堰塞湖。堰塞湖形成后在晚更新世晚期(约27 ka B.P.)发生了溃决,并在坝体下游形成长约5 km的天然混杂堆积体,判断其为叠溪古滑坡堰塞湖溃决后形成的溃坝堆积。该套溃坝堆积体具有叠瓦构造、孔洞构造、块状构造、杂基构造、支撑—叠置构造及韵律互层构造。从上游至下游,溃坝堆积体的出露厚度逐渐变薄,砾石碎屑成分表现出由粗变细的变化趋势。溃坝堆积体是由高流态灾难性洪流及常态流和河流态两种机制形成,相应地具有两大类沉积相:巨砾层相及砾石层相和砂层相,依据溃坝堆积的地貌结构和沉积相特征可以推断叠溪古滑坡堰塞湖至少发生过一次极其罕见的灾难性溃决洪水事件。     

吉林省中元古界老岭群花山组黑色岩系主要地质特征及其成矿作用

吉林省中元古界花山组中首次划分出典型的黑色岩系,有机碳平均0.74%,最高达15.4%,普遍含纳米级黄铁矿,在白山市杉松岗黑色岩系中,首次发现Pt、Pd矿,最高品位（0.1～0.145）×10-6。产在黑色岩系中的铜钴矿（大横路、杉松岗）是微生物作用、海底喷流作用、有机流体作用以及受后期热液改造的层控矿床。