首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Transected F1 fold structures in eastern Ireland are associated with subhorizontal stretching in the S1, cleavage whereas axial planar cleavage contains a vertical elongation direction. This suggests that the non-axial planar cleavage was influenced by a distributed strike-slip ductile shear. A major NE-SW trending F1 syncline is described in which the minor F1 folds show systematic variations in cleavage transection parameters. On the steep limb of the major syncline the cleavage transects the minor F1 folds in a consistently clockwise sense, whereas on the normal limb anticlockwise transected folds are seen. Axial planar cleavage occurs at the core of the major syncline. Fold profile analysis indicates that the buckling of the layers began before the initiation of the cleavage. Open, parallel folds at the major synclinal hinge zone are progressively ‘flattened’ on the steep limb towards a major D1 sinistral transcurrent fault. The angular transection, A, attains a maximum of 15° clockwise which diminishes to <5° at higher strains adjacent to the major fault. Incremental fibre growth in pressure shadows show a two-stage tectonic strain superposition of vertical pure shear followed by sinistral transcurrent simple shear during the development of the clockwise transecting cleavage. Anticlockwise transected folds were influenced by local dextral strike-slip on the southern margins of a rigid terrane. As a regional feature, the clockwise transection is explained by a sinistral transpressive deformation of end-Silurian age.  相似文献   

2.
The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S 1) axial planar to a phase of isoclinal folding (F 1). The lineations which parallel the hinges ofF 1 folds are deformed by a set of folds (F 2) having vertical or very steep axial planes. At many places a crenulation cleavage (S 2) has developed subparallel to the axial planes ofF 2 folds, particularly in the psammopelitic rocks. The plunge and trend ofF 2 folds vary widely over the area. Deformation ofF 2 folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F 3) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F 4), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F 5). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF 3 onF 2.F 1 folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F2 feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF 1 structures, resulting in the formation of tight and isoclinal antiforms (F 2) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF 2 isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF 2 movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF 2 folding over a large part of the area. Further, the virtually coaxial nature ofF 2 andF 3 folds and the refolding ofF 3 folds by a new set of N-S folds is an indication of continuous progressive deformation.  相似文献   

3.
F1 macroscopic folds in the Late Palaeozoic Coffs Harbour Beds in the SE portion of the New England Fold Belt are commonly transected by cleavage. These macroscopic folds are tight to isoclinal structures, with a consistent vergence to the NE. Axial surfaces are either steeply dipping to the SW or vertical, and are typically faulted. Anomalous bedding‐cleavage relations occur where the steeply dipping cleavage intersects overturned limbs of F1 macroscopic and some F1 mesoscopic folds. Elsewhere F1 mesoscopic folds have a well developed, axial‐surface cleavage and are rarely downward facing. Cleavage is commonly strike‐divergent from axial surfaces of F1 macroscopic folds, except adjacent to the Demon Fault System, where they are parallel. These anomalous cleavage‐folds relations possibly developed during the one deformation. D1 structures are refolded by kink‐like folds that are steeply plunging. The structural style of the D1 deformation indicates that it possibly resulted from accretionary processes at a consuming plate margin.  相似文献   

4.
In the western part of the North Singhbhum fold belt near Lotapahar and Sonua the remobilized basement block of Chakradharpur Gneiss is overlain by a metasedimentary assemblage consisting of quartz arenite, conglomerate, slate-phyllite, greywacke with volcanogenic material, volcaniclastic rocks and chert. The rock assemblage suggests an association of volcanism, turbidite deposition and debris flow in the basin. The grade of metamorphism is very low, the common metamorphic minerals being muscovite, chlorite, biotite and stilpnomelane. Three phases of deformation have affected the rocks. The principal D1 structure is a penetrative planar fabric, parallel to or at low angle to bedding. No D1 major fold is observed and the regional importance of this deformation is uncertain. The D2 deformation has given rise to a number of northerly plunging major folds on E-W axial planes. These have nearly reclined geometry and theL 2lineation is mostly downdip on theS 2surface, though some variation in pitch is observed. The morphology of D2 planar fabric varies from slaty cleavage/schistosity to crenulation cleavage and solution cleavage. D3 deformation is weak and has given rise to puckers and broad warps on schistosity and bedding. The D2 major folds south of Lotapahar are second order folds in the core of the Ongarbira syncline whose easterly closure is exposed east of the mapped area. Photogeological study suggests that the easterly and westerly closing folds together form a large synclinal sheath fold. There is a continuity of structures from north to south and no mylonite belt is present, though there is attenuation and disruption along the fold limbs. Therefore, the Singhbhum shear zone cannot be extended westwards in the present area. There is no evidence that in this area a discontinuity surface separates two orogenic belts of Archaean and Proterozoic age.  相似文献   

5.
The southeastern Lachlan Fold Belt at Batemans Bay on the New South Wales south coast is an accretionary complex with a prolonged deformation history. Early features include synsedimentary folds, mélange, disaggregated bedding and faults. Fabrics within the clast-in-matrix mélange and mudstone match those found in cores from the lower slopes of modern accretionary prisms. At the toe of the accretionary prism, the contact between the craton-derived Adaminaby Group and ocean floor deposits of the Wagonga Group is conformable. As subduction continued, the early structures were overprinted by (D1) deformation that produced meridional north – south-trending, tight to isoclinal folds (F1) and associated axial-plane cleavage (S1). This west-dipping subduction occurred in the Late Ordovician/Early Silurian but probably began much earlier. A younger regional deformation (D2) resulted in north – south-trending, open to tight folds (F2), slightly oblique to F1, and an axial-surface cleavage (S2).  相似文献   

6.
Structures associated with soft‐sediment deformation are preserved in the Neoproterozoic Dalradian Supergroup of SW Scotland and NW Ireland. Clastic dykes display a range of age relationships to regional Caledonian D1 folds and fabrics from pre‐tectonic to hitherto unrecognized post‐tectonic. Evidence for the post‐D1 timing of some dykes includes the emplacement of centimetre‐scale injections along regional S1 cleavage, the disorientation and transport of cleaved wall‐rock clasts within larger dykes, and clastic dykes which markedly cross‐cut and transect F1 fold hinges and axial planes. Collectively, these observations are compatible with the earliest regional (D1) structures deforming a sequence which contained locally overpressured and unlithified pockets of sediment. These critical relationships indicate that overpressured pockets of unlithified sediment were possibly retained within the Dalradian for significant periods of time spanning at least 120 Ma given existing isotopic constraints. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

7.
Four phases of deformation are recorded by minor structures in the New Harbour Group (NHG) of southern Holy Island. The regional schistosity in these rocks is a differentiated crenulation cleavage of D2 age. An earlier preferred orientation (S1) is commonly preserved as crenulations within the Q-domain microlithons of the S2 schistosity and is demonstrably non-parallel to bedding. F3 folds are widely developed in S2 and, to a lesser extent, in bedding. S3 crenulation cleavage is sporadically developed but can be intense locally. A major antiformal fold exists in the NHG near Rhoscolyn. This fold is of D3 age since it clearly deforms S2 schistosity and is consistent with the vergence of F3 minor structures. All planar structures are deformed by folds of D4 age. © 1997 John Wiley & Sons, Ltd.  相似文献   

8.
Low-grade metamorphic rocks of Paleozoic–Mesozoic age to the north of Konya, consist of two different groups. The Silurian–Lower Permian Sizma Group is composed of reefal complex metacarbonates at the base, and flyschoid metaclastics at the top. Metaigneous rocks of various compositions occur as dykes, sills, and lava flows within this group. The ?Upper Permian–Mesozoic age Ardicli Group unconformably overlies the Sizma Group and is composed of, from bottom to top, coarse metaclastics, a metaclastic–metacarbonate alternation, a thick sequence of metacarbonate, and alternating units of metachert, metacarbonates and metaclastics. Although pre-Alpine overthrusts can be recognized in the Sizma Group, intense Alpine deformation has overprinted and obliterated earlier structures. Both the Sizma and Ardicli Groups were deformed, and metamorphosed during the Alpine orogeny. Within the study area evidence for four phases of deformation and folding is found. The first phase of deformation resulted in the major Ertugrul Syncline, overturned tight to isoclinal and minor folding, and penetrative axial planar cleavage developed during the Alpine crustal shortening at the peak of metamorphism. Depending on rock type, syntectonic crystallization, rotation, and flattening of grains and pressure solution were the main deformation mechanisms. During the F2-phase, continued crustal shortening produced coaxial Type-3 refolded folds, which can generally be observed in outcrop with associated crenulation cleavage (S2). Refolding of earlier folds by the noncoaxial F3-folding event generated Type-2 interference patterns and the major Meydan Synform which is the largest map-scale structure within the study area. Phase 3 structures also include crenulation cleavage (S3) and conjugate kink folds. Further shortening during phase 4 deformation also resulted in crenulation cleavage and conjugate kink folds. According to thin section observations, phases 2–4 crenulation cleavages are mainly the result of microfolding with pressure solution and mineral growth.  相似文献   

9.
The Dating rocks and Darjeeling gneisses, which constitute the Sikkim dome in eastern Himalaya, as well as the Gondwana and Buxa rocks of ‘Rangit Window’, disclose strikingly similar sequences of deformation and metamorphism. The structures in all the rocks belong to two generations. The structures of early generation are long-limbed, tight near-isoclinal folds which are often intrafolial and rootless. These intrafolial folds are associated with co-planar tight folds with variably oriented axes and sheath folds with arcuate hinges. Penetrative axial plane cleavage and mineral lineation are related structures; transposition of bedding is remarkable. This early phase of deformation (D 1) is accompanied by constructive metamorphism. The structures of later generation are open, asymmetrical or polyclinal; a crenulation cleavage or discrete fracture may occur. The structures of early generation are distorted by folds of later generation and recrystallized minerals are cataclastically deformed. Recrystallization is meagre or absent during the later phase of deformation (D 2). The present discussion is on structures of early generation and strain environment during theD 1 phase of deformation. The concentration of intrafolial folds in the vicinity of ductile shear zones and decollement or detachment surface (often described as ‘thrust’) may be considered in this context. The rocks of Darjeeling-Sikkim Himalaya display minor structures other than intrafolial folds and variably oriented co-planar folds. The state of finite strain in the rocks, as observed from features like flattened grains and pebbles, ptygmatic folds and boudinaged folds indicate combination of flattening and constrictional type strain. The significance of the intrafolial folds in the same rocks is discussed to probe the environment of strain during progressive deformation (D 1).  相似文献   

10.
A multiple-deformation sequence is established for different types of gneisses, mafic-paleosomes and banded magnetite quartzites (BMQ) exposed within the area. In gneisses, the basin-shaped map pattern represents the type-i interference structure formed due to the overprinting of F3 folds with ENE striking axial planes on F2 folds with axial planes striking NNW. The BMQ band occurring as an enclave within the gneissic country, represents a large scale F1 fold with relatively smaller scale F2 folds developed on its limbs. Mafic-paleosomes within the streaky-charnockitic-gneisses exhibit structures formed due to the interference of more than two phases of folding (F1,Fla,F2,F3). It is shown that the deformation plan in these rocks is consistent with the generalized deformation scheme for Granite-greenstone belts. The difference in the map pattern of Granite-greenstone belts and Granulite-charnockite terrains is ascribed to the variance in Theological properties, layerthickness ratios and local displacement directions during different phases of folding. These differences apart, both the Granite-greenstone and Granulite-charnockite provinces in South India are deformed by an early isoclinal folding which is successively overprinted by folding on NNW and ENE striking axial planes.  相似文献   

11.
Transpressional deformation has played an important role in the late Paleozoic evolution of the western Central Asian Orogenic Belt (CAOB), and understanding the structural evolution of such transpressional zones is crucial for tectonic reconstructions. Here we focus on the transpressional Irtysh Shear Zone with an aim at understanding amalgamation processes between the Chinese Altai and the West/East Junggar. We mapped macroscopic fold structures in the southern Chinese Altai and analyzed their relationships with the development of the adjacent Irtysh Shear Zone. Structural observations from these macroscopic folds show evidence for four generations of folding and associated fabrics. The earlier fabric (S1), is locally recognized in low strain areas, and is commonly isoclinally folded by F2 folds that have an axial plane orientation parallel to the dominant fabric (S2). S2 is associated with a shallowly plunging stretching lineation (L2), and defines ∼NW-SE tight-close upright macroscopic folds (F3) with the doubly plunging geometry. F3 folds are superimposed by ∼NNW-SSE gentle F4 folds. The F3 and F4 folds are kinematically compatible with sinistral transpressional deformation along the Irtysh Shear Zone and may represent strain partitioning during deformation. The sub-parallelism of F3 fold axis with the Irtysh Shear Zone may have resulted from strain partitioning associated with simple shear deformation along narrow mylonite zones and pure shear-dominant deformation (F3) in fold zones. The strain partitioning may have become less efficient in the later stage of transpressional deformation, so that a fraction of transcurrent components was partitioned into F4 folds.  相似文献   

12.
The moderately metamorphosed and deformed rocks exposed in the Hampden Synform, Eastern Fold Belt, in the Mt Isa terrane, underwent complex multiple deformations during the early Mesoproterozoic Isan Orogeny (ca 1590–1500 Ma). The earliest deformation elements preserved in the Hampden Synform are first‐generation tight to isoclinal folds and an associated axial‐planar slaty cleavage. Preservation of recumbent first‐generation folds in the hinge zones of second‐generation folds, and the approximately northeast‐southwest orientation of restored L1 0 intersection lineation suggest recumbent folding occurred during east‐west to northwest‐southeast shortening. First‐generation folds are refolded by north‐south‐oriented upright non‐cylindrical tight to isoclinal second‐generation folds. A differentiated axial‐planar cleavage to the second‐generation fold is the dominant fabric in the study area. This fabric crenulates an earlier fabric in the hinge zones of second‐generation folds, but forms a composite cleavage on the fold limbs. Two weakly developed steeply dipping crenulation cleavages overprint the dominant composite cleavage at a relatively high angle (>45°). These deformations appear to have had little regional effect. The composite cleavage is also overprinted by a subhorizontal crenulation cleavage inferred to have developed during vertical shortening associated with late‐orogenic pluton emplacement. We interpret the sequence of deformation events in the Hampden Synform to reflect the progression from thin‐skinned crustal shortening during the development of first‐generation structures to thick‐skinned crustal shortening during subsequent events. The Hampden Synform is interpreted to occur within a progressively deformed thrust slice located in the hangingwall of the Overhang Shear.  相似文献   

13.
Detailed structural investigations were carried out in the Pevek area in order to verify the tectonic evolution of the Mesozoic thrust and fold belt in Chukotka. South-vergent F1 folds in Triassic rocks were proved to be the earliest structures formed during the first deformation stage DI. These structures were deformed by north-vergent folds F2 that were formed during the second deformation stage DII. North-vergent folds are the main structures of the Jurassic–Lower Cretaceous complex. The fold structures of the first two stages are deformed by shear folds F3 finishing the stage DII. All these structures are deformed by submeridionally trending normal faults referred to the deformation stage DIII.  相似文献   

14.
Analysis of shapes of folds, together with other structures such as axial plane foliation boudinage, mullions and cross joints, show that the F1 folds in the ‘main Raialo syncline’ were formed by buckling, and were subsequently modified by flattening normal to the axial planes and lengthening along the axis. The apparent buckle shortening of the F1 folds generally ranges between 70 and 80%. The folds were formed by simple shear (giving place to pure shear at certain stages) in an almost north-south direction on subhorizontal beds. Progressive deformation in the later stage of F1 folding resulted in gentle upright folding of F1 axial planes on F1′ axes slightly oblique to F1. The F2 folds, whose average shortening ranges from 20 to 30%, were also formed by buckling caused by horizontal compression in a nearly northwest-southeast direction. This folding was preceded and followed in some instances by homogeneous strain, as deduced fro mthe shapes of the F2 folds and the nature of variation of the F1 lineations. The F3 conjugate structures developed when the maximum compressive strain was vertical and the intermediate compressive strain northwest-southeast, almost normal to the subvertical F2 axial planes. The increase in the amplitude of the F2 folds in the last phase of F2 folding in certain zones resulted in an excess of vertical load, which dissipated with the formation of the F3 structures. In the last stage of movement (F4) the maximum compressive strain became horizontal along the strike of F2 axial planes, whereas the minimum compressive strain was normal to them. The F4 structures, therefore, point to a longitudinal shortening with reference to large scale F2 folding.  相似文献   

15.
In Cap Corse, progressive deformation during Late Cretaceous obduction of the ophiolitic Schistes Lustrés (sensu lato) as a pile of imbricate, lens-shaped units during blueschist facies metamorphism was non-coaxial. Two zones are recognized: a lower series emplaced towards the west is overlain by a series emplaced towards the south-southwest in Cap Corse. Equivalent structures (differing only in orientation) occur in both zones. The change in thrust direction was responsible for local refolding and reorientation of previously formed structures, parallel to the new stretching direction immediately below the thrust contact between the two zones, and within localized shear zones in the underlying series.Both zones are refolded about E-overturned F2 folds trending between 350 and 025°. Local minor E-directed thrusts occur associated with the F2 folds. This second deformation of Middle Eocene age is considered to be related to the backthrusting of an overlying klippe containing gneisses of South Alpine origin, and is followed by a third Late Eocene phase of upright 060°-trending F3 folds accompanied by greenschist facies metamorphism.  相似文献   

16.
Large sheath folds in the basal high-pressure nappes of the Cabo Ortegal complex are described and a kinematic interpretation provided. The principal penetrative and map structures relate to regional D2 deformation, which produced foliations (S2) bearing mineral and stretching lineations (L2) and several types of folds (a-type, sheath-like and ‘folded folds’). The latter structures are subparallel to the trend of the orogen. Their attitude suggests that the units involved shared a common tectonic evolution during progressive ductile deformation of an anisotropic medium. Reconstruction of major geological structures was accomplished through projection of map-scale features onto the ductile flow plane and the plane perpendicular to the ductile flow direction. The structures reconstructed illustrate their development in the deeper structural levels of an orogenic channel subjected to high-pressure metamorphism during the early phases of the Hercynian orogeny in NW Iberia. We argue that orogen-normal tectonic displacements (of up to a few hundreds of kilometers) represent the minor components of the transpression with possibly thousands of kilometers along-strike dextral displacement between the intervening plates (during subduction/collision).  相似文献   

17.
大别-苏鲁造山带不同岩片(块)经历了不同的褶皱变形.榴辉岩块(或透镜体)和硬玉石英岩片经历了高压-超高压背景下的两幕褶皱变形之后,在区域性第一幕变形期间主要发生透镜化为主,后期与围岩共同经历紧闭同斜第二幕褶皱.而其它岩片主要经历了现今野外可见的区域性三幕褶皱,其中区域性第一幕褶皱为片内残留褶皱,在斜长角闪岩透镜体中多见,宏观规律不明.区域性第二幕褶皱在露头尺度多见,轴面为折劈理,局部强烈置换成片理化带(复合片理或第二期片理),恢复第三幕褶皱改造作用后,揭示出各种岩片中的各级尺度的第二幕褶皱都为轴面北西倾南东倒、轴迹走向为NNE向的紧闭不对称褶皱,不对称性一致反映其指向与各种岩片向南东的逆冲运动有关.第三幕褶皱为以片理或折劈理为变形面的宽缓褶皱,轴迹走向NWW,枢纽向西倾伏.韧性剪切带为非透入性构造,分早晚两期,早期为韧性逆冲,新县穹隆以南,运动学标志指示向北逆冲,错切第二幕褶皱,结合新县穹隆北部向南的逆冲特征,反映这些韧性逆冲断层多数为第二幕大型褶皱翼部的次级逆冲断层;晚期为韧性滑脱带,其发育局限于几个岩性差异较大的接触带,带内伸展型折劈理发育,并对挤压构造样式有重要的改造作用.华北克拉通东部地块是华北克拉通的重要组成,其盖层古生界和三叠系在印支运动期间经历了一幕宽缓褶皱作用,其轴迹方向主体也为NWW向.这一褶皱构造明显在变形时间、变形样式和展布方向上都和大别-苏鲁造山带中的第三幕褶皱非常一致,说明它们具有动力学上的必然联系.同时,研究表明在华北克拉通东部地块中没有经历大别-苏鲁造山带中区域性第一、第二幕褶皱变形的记录,故本文认为印支期这两幕变形主要发生在华北板块东南缘的边界上,并没有波及到板内,而且从东向西高压-超高压岩石剥露具有穿时性.只有当华北板块和华南板块在第二幕变形之后构成了统一块体后,第三幕变形才波及华北板内.  相似文献   

18.
Study of a thick section of late Paleozoic to mid-Cretaceous sedimentary and volcanogenic rocks in eastcentral Sierra Nevada has revealed an involved structural succession not readily apparent when analysed under the traditional assumptions of structural analysis (e.g. parallel structures are of the same age).Earliest structures in the area occur as sparse folds in late Paleozoic rocks, whereas in Triassic to mid-Cretaceous rocks earliest structures occur as penecontemporaneous slumps. Upon these earliest structures are superimposed slaty cleavage with associated lineations and subsequent crenulations. The slaty cleavage across the area is statistically parallel, as are the axial planes of crenulations which fold the slaty cleavage. Such a succession would traditionally be interpreted as representing two periods of deformation, the first forming the slaty cleavage and the second the crenulation of the slaty cleavage. There is evidence, however, to indicate that the slaty cleavage itself was formed during more than one period of deformation and the same may be true for the crenulations. Dykes emplaced in Jurassic rocks have been dated (U/Pb) as mid-Cretaceous and lie parallel to what is probably an early slaty cleavage direction. The dykes, however, also bear a slaty cleavage, albeit weaker than in the host rock. In addition, quantitative strain determinations of rocks in the area show that the older units are more strongly deformed than the younger units. These and other data suggest that the statistically parallel slaty cleavage and related structures (folds, lineations, etc.) found in the Jurassic and older rocks have formed during at least two, and possibly three, increments of strain, each increment separated by a lengthy period of geologic time, possibly as much as 45 Ma or more. Crenulations of the slaty cleavage at any point (subsequently formed after each period of slaty cleavage formation) may even predate slaty cleavage formed later at another nearby point.While it is possible to set up a chronology between earlier (tectonic and/or penecontemporaneous slumps) and later structures (slaty cleavage, folds, lineations, etc.), it is not valid to designate for the entire area a relative time sequence of formation of slaty cleavage and crenulations in the Jurassic or older rocks by the usual methods (e.g. S2, S3, F2, F3, etc.). These later structures can only be designated as Only in the youngest stratigraphic unit in the area, which has been subjected to one deformation (mid-Cretaceous), can a valid structural succession be applied areally.We suggest that multiphase, parallel structures, comparable to those we have described, may be a relatively common phenomenon in orogenic belts. Until one arrives at a thorough understanding of the detailed stratigraphy and the absolute ages of units in key relationships to the structures, it may only be possible to delineate the broadest of time sequences for the structures concerned.  相似文献   

19.
本文区分了“樱桃园组”岩石在元古主构造旋回的三幕变形,详细描述了各幕SFL组合和按区段进行了投影。主变形幕D1的构造最发育,F1控制着本区的岩性分布。构造序列及样式变化显示由高塑性向脆性的变形格式。本组与下伏的太古鞍山群变粒岩在构造序列、样式和变质相上都有显著差异,过去许多地质学家把二者混划为一个单位,统名“鞍山群”,属太古宙。但本组与上覆的辽河群(上元古)的构造样式和变质相却相似,故其时代相当于早元古Ferrian期。  相似文献   

20.
Three major episodes of folding are evident in the Eastern Ghats terrain. The first and second generation folds are the reclined type; coaxial refolding has produced hook-shaped folds, except in massif-type charnockites in which non-coaxial refolding has produced arrow head folds. The third generation folds are upright with a stretching lineation parallel to subhorizontal fold axes. The sequence of fold stylesreclinedF 1and coaxialF 2, clearly points to an early compressional regime and attendant progressive simple shear. Significant subhorizontal extension duringF 3folding is indicated by stretching lineation parallel to subhorizontal fold axes. In the massif-type charnockites low plunges ofF 2folds indicate a flattening type of deformation partitioning in the weakly foliated rocks (magmatic ?). The juxtaposition of EGMB against the Iron Ore Craton of Singhbhum by oblique collision is indicative of a transpressional regime.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号