The effect of target properties on crater morphology: Comparison of central peak craters on the Moon and Ganymede

Abstract— We examine the morphology of central peak craters on the Moon and Ganymede in order to investigate differences in the near‐surface properties of these bodies. We have extracted topographic profiles across craters on Ganymede using Galileo images, and use these data to compile scaling trends. Comparisons between lunar and Ganymede craters show that crater depth, wall slope and amount of central uplift are all affected by material properties. We observe no major differences between similar‐sized craters in the dark and bright terrain of Ganymede, suggesting that dark terrain does not contain enough silicate material to significantly increase the strength of the surface ice. Below crater diameters of ?12 km, central peak craters on Ganymede and simple craters on the Moon have similar rim heights, indicating comparable amounts of rim collapse. This suggests that the formation of central peaks at smaller crater diameters on Ganymede than the Moon is dominated by enhanced central floor uplift rather than rim collapse. Crater wall slope trends are similar on the Moon and Ganymede, indicating that there is a similar trend in material weakening with increasing crater size, and possibly that the mechanism of weakening during impact is analogous in icy and rocky targets. We have run a suite of numerical models to simulate the formation of central peak craters on Ganymede and the Moon. Our modeling shows that the same styles of strength model can be applied to ice and rock, and that the strength model parameters do not differ significantly between materials.     

Oscillating peak model of basin and crater formation

A model of crater and basin formation is presented in which the interior morphology is most strongly influenced by the amount of central rebound occurring rapidly after the initial crater excavation. In large craters the rebound is so great that it has started to collapse again under its own weight, and in small basins this collapse is so rapid that a second interior depression is formed. In large basins such as Orientale, the central region is considered to have undergone a more extensive damped vertical oscillation.Field evidence, particularly stratigraphical relations in Orientale and the morphometry of central peaks and basin inner rings, strongly support this theory.Paper presented at the European Workshop on Planetary Sciences, organised by the Laboratorio di Astrofisica Spaziale di Frascati, and held between April 23–27, 1979, at the Accademia Nazionale del Lincei in Rome, Italy.     

The Sirente crater,Italy: Impact versus mud volcano origins

Abstract— The Sirente crater is a circular structure with a diameter of ˜80 m. The rim deposit is an inverse‐graded, matrix‐supported breccia. Sedimentological features of the rim deposit suggest that the crater is not related to an explosion or violent mechanical displacement. The structure and texture of the deposit exhibit a primary sedimentary character. The rim deposits do not contain artifacts and do not show evidence of reworking. A multistage formation is reconstructed for the rim growth and associated deposits. The geometry and sedimentology of the deposits indicate that they were produced by the extrusion and accumulation of mudflow deposits. The dominant ejection mechanism was low mud fountains and the transport medium was water. Petrographic and geochemical evidence does not indicate any physical or cryptic trace of an extraterrestrial body. The most realistic agent that explains the observed effects is a rapid local emission of mud and/or water. Geological processes capable of producing these features include piping sinkholes or, more probably, “caldera”‐type mud volcanoes, which may result from underground water‐table perturbation and/or decompression of deep CO₂/hydrocarbon gas reservoirs due to tectonic deformation or faulting activity during a seismic event. In both cases, the name “crater” for this geological form may be maintained, but there is no compelling evidence for an impact origin. In this paper, the scientific literature on the Sirente crater is reconsidered in the light of new morphological, sedimentological, geochemical, and archaeological data. A new mechanism is proposed involving mud‐fountaining.     

Phobos,Deimos, and the Moon: Size and distribution of crater ejecta blocks

The size and radial distributions of ejecta blocks around craters (D = 0.8 to 10 km) on Phobos and Deimos have been compared to those around lunar craters (D = 0.2 to 3.5 km). The radial distribution of blocks was found to be similar on Phobos and the Moon, but more dispersed on Deimos. For the best imaged crater on Deimos (D = 800 m), the size distributions of blocks and the fraction of excavated volume present as blocks are similar to those on the Moon. The wider dispersal of blocks on Deimos is consistent with other findings on the spread of finer ejecta over the satellite.     

Tectonic pattern of the crater Grimaldi region of the Moon

The tectonics of the Grimaldi area are described and analyzed in detail from high-resolution Lunar Orbiter photographs.Rille grabens are long and narrow fault zone structures of lunar terra. The polygonal rille graben pattern indicates the importance of lunar internal activity with an adjoining thin lithosphere in the areal tectonics at the time of rille grabening. The graben subsidence developed during tensional bending of this thin terra lithosphere. The en échelon graben offsets indicate the existence of strikeslip movements along the main fault under tensional lithosphere conditions.In some places mare ridge ranges continue in the direction of the rille graben indicating the connection of these structures to each other as part of the lunar tectonic evolution. The very thin mare lithosphere was affected more easily and over a longer period of time by lunar internal forces. The effect of older structural units is thus less conspicuous within mare areas. Proposed Riedel-shear-like structures indicate a slight shortening and compression of the mare basin lithosphere during movements along lava-covered zones of weakness.     

Comparison of the crater morphology-size relationship for Mars,Moon, and Mercury

New central peak-crater size data for Mars shows that a higher percentage of relatively unmodified Martian craters have central peaks than do fresh lunar craters below a diameter of 30 km. For example, in the diameter range 10 to 20 km, 60% of studied Martian craters have central peaks compared to 26% for the Moon. Gault et al. (1975, J. Geophys. Res.80, 2444–2460) have demonstrated that central peaks occur in smaller craters on Mercury than on the Moon, and that this effect is due to the different gravity fields in which the craters formed. Similar differences when comparing Mars and the Moon show that gravity has affected the diameter at which central peaks form on Mars. Erosion on Mars, therefore, does not completely mask differences in crater interior structure that are caused by differences in gravity. Effects of Mars' higher surface gravity when compared to the Moon are not detected when comparing terrace and crater shape data. The morphology-crater size statistics also show that a full range of crater shapes occur on Mars, and craters tend to become more morphologically complex with increasing diameter. Comparisons of Martian and Mercurian crater data show differences which may be related to the greater efficacy of erosion on Mars.     

Interplanet variations in scale of crater morphology—Earth,Mars, Moon

Craters on the Earth, Mars, and the Moon show a spectrum of morphologies with diameter increasing from simple, bowl-shaped craters through craters with increasingly complex central peaks, to craters with “peak rings” and basins with multiple concentric scarps. In each category there is a range of diameters, centered around a characteristic diameter, D_c. It is found that D_c decreases as the size of the planet increases. Several possible explanations are considered. It is suggested that the effect results from a gravity scaling law derived here and having approximately from the D_c∂ 1/g^1.25, where g is the surface gravity. All geological structures in which gravity is the dominant parameter affecting the morphology should follow such a law.     

Nonuniform cratering of the Moon and a revised crater chronology of the inner Solar System

We model the cratering of the Moon and terrestrial planets from the present knowledge of the orbital and size distribution of asteroids and comets in the inner Solar System, in order to refine the crater chronology method. Impact occurrences, locations, velocities and incidence angles are calculated semi-analytically, and scaling laws are used to convert impactor sizes into crater sizes. Our approach is generalizable to other moons or planets. The lunar cratering rate varies with both latitude and longitude: with respect to the global average, it is about 25% lower at (±65°N, 90°E) and larger by the same amount at the apex of motion (0°N, 90°W) for the present Earth-Moon separation. The measured size-frequency distributions of lunar craters are reconciled with the observed population of near-Earth objects under the assumption that craters smaller than a few kilometers in diameter form in a porous megaregolith. Varying depths of this megaregolith between the mare and highlands is a plausible partial explanation for differences in previously reported measured size-frequency distributions. We give a revised analytical relationship between the number of craters and the age of a lunar surface. For the inner planets, expected size-frequency crater distributions are calculated that account for differences in impact conditions, and the age of a few key geologic units is given. We estimate the Orientale and Caloris basins to be 3.73 Ga old, and the surface of Venus to be 240 Ma old. The terrestrial cratering record is consistent with the revised chronology and a constant impact rate over the last 400 Ma. Better knowledge of the orbital dynamics, crater scaling laws and megaregolith properties are needed to confidently assess the net uncertainty of the model ages that result from the combination of numerous steps, from the observation of asteroids to the formation of craters. Our model may be inaccurate for periods prior to 3.5 Ga because of a different impactor population, or for craters smaller than a few kilometers on Mars and Mercury, due to the presence of subsurface ice and to the abundance of large secondaries, respectively. Standard parameter values allow for the first time to naturally reproduce both the size distribution and absolute number of lunar craters up to 3.5 Ga ago, and give self-consistent estimates of the planetary cratering rates relative to the Moon.     

Pedestal crater heights on Mars: A proxy for the thicknesses of past, ice-rich, Amazonian deposits

Mid-latitude pedestal craters on Mars offer crucial insights into the timing and extent of widespread ice-rich deposits during the Amazonian period. Our previous comprehensive analysis of pedestal craters strongly supports a climate-related formation mechanism, whereby pedestals result from impacts into ice-rich material at mid latitudes during periods of higher obliquity. The ice from this target deposit later sublimates due to obliquity changes, but is preserved beneath the protective cover of the armored pedestal. As such, the heights of pedestals act as a proxy for the thicknesses of the paleodeposits. In this analysis, our measurement of 2300 pedestal heights shows that although pedestals can reach up to ∼260 m in height, ∼82% are shorter than 60 m and only ∼2% are taller than 100 m. Mean pedestal heights are 48.0 m in the northern mid latitudes and 40.4 m in the southern mid latitudes, with the tallest pedestals located in Utopia Planitia, Acidalia Planitia and Malea Planum. We use these data in conjunction with prior climate model results to identify both regional and global trends regarding ice accumulation during obliquity excursions. Our data provide evidence for multiple episodes of emplacement and removal of the mid-latitude ice-rich deposit based on stratigraphic relationships between pedestal craters and the close proximity of pedestals with significantly different heights.     

On the rate of ancient meteoroidal flux: Studies of the pre-mare crater population on the Moon

According to radiometric dating of lunar rocks, meteoroidal bombardment and accompanying cratering on the Moon were intensive in the first 0.7×10⁹ y, the so-calledterra stage. Recently the hypothesis of a terminal cataclysm has been gaining acceptance, meaning that a sharp increase in the bombardment followed by a steep decay occurred at the end of theterra stage.The purpose of this paper is to investigate possible variations in the intensity of the bombardment during theterra stage by analyzing the population of large (3–1000 km)terra craters and comparing it with results obtained by theoretical models. The proportion of fresh craters is specifically used.Observational data were obtained by studying the craters on an oldterra surface photographed by Zond 8 and/or covered by LTO and LM maps and by conducting a statistical study of theterra listed in the Lunar and Planetary Laboratory Catalog. Mathematical models were developed in such a way as to make them dimensionless, and as such applicable even without the knowledge of the physical constants and variables involved. Particularly powerful is the method of measuring time as multiples of the average lifetime of a crater of that size.The following conclusions and/or interpretations are reached. (1) A crater remains fresh for less than 20% of the average life of a crater of that size. (2) A condition of equilibrium (i.e., on the average, a new impact does not cause a net increase in the total number of craters) is reached or almost reached on lunarterrae. (3) The age of theterra surface is more than three average lifetimes of the 2 km to at least 20 km size craters (4) The observedterra crater population isnot the result of two cataclysms, one at the beginning of the stage and one at the end. (5) This population, however, could be the result of a constant or slowly decaying flux continuing until the end of the stage, when the terminal cataclysms occurred. This sequence of events cannot be proven or disproven. (6) If no terminal cataclysm occurred, then the meteoroidal flux during theterra stage was slowly decaying or constant. (7) The formation of all the large multi-ringed basins essentially contemporaneously is doubtful.     

Floor-fractured crater models of the Sudbury Structure,Canada: Implications for initial crater size and crater modification

Abstract The pattern of radial and concentric offset dikes at Sudbury strongly resembles fracture patterns in certain volcanically modified craters on the Moon. Since the Sudbury dikes apparently formed shortly after the impact event, this resemblance suggests that early endogenic modification at Sudbury was comparable to deformation in lunar floor-fractured craters. Although regional deformation has obscured many details of the Sudbury Structure, such a comparison of Sudbury with lunar floor-fractured craters provides two alternative models for the original size and surface structures of the Sudbury basin. First, the Sudbury date pattern can be correlated with fractures in the central peak crater Haldane (36 km in diameter). This comparison indicates an initial Sudbury diameter of between 100 and 140 km but requires loss of a central peak complex for which there is little evidence. Alternatively, comparison of the Sudbury dikes with fractures in the two-ring basin Schrödinger indicates an initial Sudbury diameter of at least ～ 180 km, which is in agreement with other recent estimates for the size of the Sudbury Structure. In addition to constraining the size and structure of the original Sudbury crater, these comparisons also suggest that crater modification may reflect different deformation mechanisms at different sizes. Most lunar floor-fractured craters are attributed to deformation over a shallow, crater-centered intrusion; however, there is no evidence for such an intrusion at Sudbury. Instead, melts from the evolving impact melt sheet probably entered fractures formed by isostatically-induced flexure of the crater floor. Since most of the lunar floor-fractured craters are too small (<100-km diameter) to induce significant isostatic adjustment, crater modification by isostatic uplift apparently is limited to only the largest of craters, whereas deformation over igneous intrusions dominates the modification of smaller craters.     

Millochau crater, Mars: Infilling and erosion of an ancient highland impact crater

The geology and stratigraphy of Millochau crater (21.4° S, 275° W), located in the highlands of Tyrrhena Terra, Mars, are documented through geomorphic analyses and geologic mapping. Crater size-frequency distributions and superposition relationships are used to constrain relative ages of geologic units and determine the timing and duration of the geologic processes that modified Millochau rim materials and emplaced deposits on Millochau's floor. Crater size-frequency distributions show a Middle Noachian age for rim materials and Middle Noachian to Early Hesperian ages for most of the interior deposits. Valley networks and gullies incised within Millochau's rim materials and interior wall, respectively, indicate fluvial activity was an important erosional process. Millochau contains an interior plateau, offset northeast of Millochau's center, which rises up to 400 m above the surrounding crater floor and slopes downward to the south and west. Layers exposed along the northern and eastern scarp boundaries of the plateau are tens to hundreds of meters thick and laterally continuous in MOC images. These layers suggest most materials within Millochau were emplaced by sedimentary processes (e.g., fluvial or eolian), with the potential for lacustrine deposition in shallow transient bodies of water and contributions of volcanic airfall. Mass wasting may have also contributed significant quantities of material to Millochau's interior, especially to the deposits surrounding the plateau. Superposition relationships combined with impact crater statistics indicate that most deposition and erosion of Millochau's interior deposits is ancient, which implies that fluvial activity in this part of Tyrrhena Terra is much older than in the eastern Hellas region. Eolian processes mobilized sediment to form complicated patterns of long- and short-wavelength dunes, whose emplacement is controlled by local topography. These deposits are some of the youngest within Millochau (Amazonian) and eolian modification may be ongoing.     

The transition from complex crater to peak-ring basin on the Moon: New observations from the Lunar Orbiter Laser Altimeter (LOLA) instrument

Impact craters on planetary bodies transition with increasing size from simple, to complex, to peak-ring basins and finally to multi-ring basins. Important to understanding the relationship between complex craters with central peaks and multi-ring basins is the analysis of protobasins (exhibiting a rim crest and interior ring plus a central peak) and peak-ring basins (exhibiting a rim crest and an interior ring). New data have permitted improved portrayal and classification of these transitional features on the Moon. We used new 128 pixel/degree gridded topographic data from the Lunar Orbiter Laser Altimeter (LOLA) instrument onboard the Lunar Reconnaissance Orbiter, combined with image mosaics, to conduct a survey of craters >50 km in diameter on the Moon and to update the existing catalogs of lunar peak-ring basins and protobasins. Our updated catalog includes 17 peak-ring basins (rim-crest diameters range from 207 km to 582 km, geometric mean = 343 km) and 3 protobasins (137-170 km, geometric mean = 157 km). Several basins inferred to be multi-ring basins in prior studies (Apollo, Moscoviense, Grimaldi, Freundlich-Sharonov, Coulomb-Sarton, and Korolev) are now classified as peak-ring basins due to their similarities with lunar peak-ring basin morphologies and absence of definitive topographic ring structures greater than two in number. We also include in our catalog 23 craters exhibiting small ring-like clusters of peaks (50-205 km, geometric mean = 81 km); one (Humboldt) exhibits a rim-crest diameter and an interior morphology that may be uniquely transitional to the process of forming peak rings. A power-law fit to ring diameters (D_ring) and rim-crest diameters (D_r) of peak-ring basins on the Moon [D_ring = 0.14 ± 0.10(D_r)^1.21±0.13] reveals a trend that is very similar to a power-law fit to peak-ring basin diameters on Mercury [D_ring = 0.25 ± 0.14(D_rim)^1.13±0.10] [Baker, D.M.H. et al. [2011]. Planet. Space Sci., in press]. Plots of ring/rim-crest ratios versus rim-crest diameters for peak-ring basins and protobasins on the Moon also reveal a continuous, nonlinear trend that is similar to trends observed for Mercury and Venus and suggest that protobasins and peak-ring basins are parts of a continuum of basin morphologies. The surface density of peak-ring basins on the Moon (4.5 × 10⁻⁷ per km²) is a factor of two less than Mercury (9.9 × 10⁻⁷ per km²), which may be a function of their widely different mean impact velocities (19.4 km/s and 42.5 km/s, respectively) and differences in peak-ring basin onset diameters. New calculations of the onset diameter for peak-ring basins on the Moon and the terrestrial planets re-affirm previous analyses that the Moon has the largest onset diameter for peak-ring basins in the inner Solar System. Comparisons of the predictions of models for the formation of peak-ring basins with the characteristics of the new basin catalog for the Moon suggest that formation and modification of an interior melt cavity and nonlinear scaling of impact melt volume with crater diameter provide important controls on the development of peak rings. In particular, a power-law model of growth of an interior melt cavity with increasing crater diameter is consistent with power-law fits to the peak-ring basin data for the Moon and Mercury. We suggest that the relationship between the depth of melting and depth of the transient cavity offers a plausible control on the onset diameter and subsequent development of peak-ring basins and also multi-ring basins, which is consistent with both planetary gravitational acceleration and mean impact velocity being important in determining the onset of basin morphological forms on the terrestrial planets.     

The Carancas meteorite impact crater,Peru: Geologic surveying and modeling of crater formation and atmospheric passage

Abstract— The recent Carancas meteorite impact event caused a worldwide sensation. An H4–5 chondrite struck the Earth south of Lake Titicaca in Peru on September 15, 2007, and formed a crater 14.2 m across. It is the smallest, youngest, and one of two eye‐witnessed impact crater events on Earth. The impact violated the hitherto existing view that stony meteorites below a size of 100 m undergo major disruption and deceleration during their passage through the atmosphere and are not capable of producing craters. Fragmentation occurs if the strength of the meteoroid is less than the aerodynamic stresses that occur in flight. The small fragments that result from a breakup rain down at terminal velocity and are not capable of producing impact craters. The Carancas cratering event, however, demonstrates that meter‐sized stony meteoroids indeed can survive the atmospheric passage under specific circumstances. We present results of a detailed geologic survey of the crater and its ejecta. To constrain the possible range of impact parameters we carried out numerical models of crater formation with the iSALE hydrocode in two and three dimensions. Depending on the strength properties of the target, the impact energies range between approximately 100–1000 MJ (0.024–0.24 t TNT). By modeling the atmospheric traverse we demonstrate that low cosmic velocities (12–14 kms^?1) and shallow entry angles (<20 °) are prerequisites to keep aerodynamic stresses low (<10 MPa) and thus to prevent fragmentation of stony meteoroids with standard strength properties. This scenario results in a strong meteoroid deceleration, a deflection of the trajectory to a steeper impact angle (40–60 °), and an impact velocity of 350–600 ms^?1, which is insufficient to produce a shock wave and significant shock effects in target minerals. Aerodynamic and crater modeling are consistent with field data and our microscopic inspection. However, these data are in conflict with trajectories inferred from the analysis of infrasound signals.     

Popigai crater: Origin and distribution of diamond-bearing impactites

Abstract— About three decades ago, a formerly unknown genetic type of natural diamonds was discovered in impact craters. Impact diamonds are currently known from a number of impact structures in Europe, Asia and North America, and it's likely that the number of finds will increase with time. The Popigai crater, Northern Siberia, where impact diamonds were first found, was specifically investigated in terms of geology, geophysics, petrography and mineralogy. Large resources of industrial impact diamonds were discovered, and these minerals were studied in detail. Authigenic impact diamonds occur in situ in shocked graphite-bearing gneisses that are found as inclusions in impact melt rocks: tagamites and suevites. According to the observed transformation of coexisting minerals, the lower estimated pressure of the coherent martensite transition of graphite to diamonds is 35 GPa. Impact diamonds inherit the original shape of graphite crystals and are composed of a polycrystalline structured aggregate of cubic and probably hexagonal carbon microcrystals 1–5 μm across. Numerous properties of diamonds depend on the high density of defects in the crystal lattice. Allothigenic impact diamonds occur in rocks produced by the homogenization and solidification of impact melt, which originated from the complete fusion of graphite-bearing precursor gneisses. These diamonds usually reflect the influence of the hot melt and are strongly corroded. Diamond-bearing tagamites and suevites in the Popigai crater interior occur as extended lens and sheets bodies and also as irregular small bodies. Diamond distribution depends on the original abundance of precursor graphite in the target rocks, on the superimposed shock-metamorphic zonation, and on the character of the ejection of shocked and melted material along different trajectories and azimuths. This has resulted in radial and concentric inhomogeneities in diamond distribution in the crater interior. On a second order, the distribution depends on the scale of melt contamination by clasts and fragments and by the duration of cooling of certain melt bodies and their constituents. Enrichment in diamonds at the margins of thick tagamite sheets is the result of rapid cooling, which prevents combustion of diamonds. A positive correlation between diamond content and the amount of phosphorus pentoxide in impactites indicates links to C and P probably in organic matter of the primary sedimentary rocks, which were subjected to granulitic metamorphism 2.4 Ga ago and melted at the time of impact 35.7 Ma ago.     

Martian fluidized crater distribution: tectonic implications

Little scaled studies on the entire planet Mars, and large scale studies of a local area (3600 km in diameter) seem to indicate geographic relations between martian fiuidized craters and ridges: all the intensely ridged areas exhibit a lot of fluidized craters. Because the presence of fluidized craters indicates low viscosity states of the martial surface, this relation would indicate that the compressive stresses only induced ridges when they occurred at times and places of low viscosity states of the martian surface.     

Thep-nuclei: abundances and origins

Summary The review discusses the solar system (meteoritic) abundances and the possible modes of nucleosynthesis of the 30-oddp-nuclei from⁷⁴Se to¹⁹⁶Hg. In addition to a discussion of the abundances for bulk meteorites, isotopic anomalies related to thep-nuclei are discussed; e.g., the Xe-HL associated with the interstellar diamonds and the extinct radionuclides¹⁴⁶Sm and⁹²Nb. Various proposed schemes of synthesizingp-nuclei are reviewed. It is noted that the 7-process (i.e., photoerosion) operating in SN Ia (exploding C-O white dwarfs) appears capable of accounting for the relative and absolute abundances of all but one or two of the rarest ofp-nuclei. Synthesis of these latter nuclei is also discussed.     

Martian subsurface properties and crater formation processes inferred from fresh impact crater geometries

Abstract— The geometry of simple impact craters reflects the properties of the target materials, and the diverse range of fluidized morphologies observed in Martian ejecta blankets are controlled by the near‐surface composition and the climate at the time of impact. Using the Mars Orbiter Laser Altimeter (MOLA) data set, quantitative information about the strength of the upper crust and the dynamics of Martian ejecta blankets may be derived from crater geometry measurements. Here, we present the results from geometrical measurements of fresh craters 3–50 km in rim diameter in selected highland (Lunae and Solis Plana) and lowland (Acidalia, Isidis, and Utopia Planitiae) terrains. We find large, resolved differences between the geometrical properties of the freshest highland and lowland craters. Simple lowland craters are 1.5–2.0 times deeper (≥5s?_o difference) with >50% larger cavities (≥2s?_o) compared to highland craters of the same diameter. Rim heights and the volume of material above the preimpact surface are slightly greater in the lowlands over most of the size range studied. The different shapes of simple highland and lowland craters indicate that the upper ?6.5 km of the lowland study regions are significantly stronger than the upper crust of the highland plateaus. Lowland craters collapse to final volumes of 45–70% of their transient cavity volumes, while highland craters preserve only 25–50%. The effective yield strength of the upper crust in the lowland regions falls in the range of competent rock, approximately 9–12 MPa, and the highland plateaus may be weaker by a factor of 2 or more, consistent with heavily fractured Noachian layered deposits. The measured volumes of continuous ejecta blankets and uplifted surface materials exceed the predictions from standard crater scaling relationships and Maxwell's Z model of crater excavation by a factor of 3. The excess volume of fluidized ejecta blankets on Mars cannot be explained by concentration of ejecta through nonballistic emplacement processes and/or bulking. The observations require a modification of the scaling laws and are well fit using a scaling factor of ?1.4 between the transient crater surface diameter to the final crater rim diameter and excavation flow originating from one projectile diameter depth with Z = 2.7. The refined excavation model provides the first observationally constrained set of initial parameters for study of the formation of fluidized ejecta blankets on Mars.