Tensile strength as an indicator of the degree of primitiveness of undifferentiated bodies

The extremely porous structure and low strength of most comets and their fragments is opposed to the properties observed in relatively pristine chondritic asteroids, even although both are sharing important chemical similitude. Laboratory experiments and observational evidence suggest that the original extremely porous aggregates that were born from the protoplanetary-disk-forming materials were highly retentive of water and organic compounds present in their forming environment. After consolidation, many of them experienced a particular dynamic history. Some bodies, quickly scattered during the formation of the giant planets and later stored in the Kuiper Belt (KB) or the Oort Cloud (OC) regions, would have suffered a lower degree of impact processing than previously thought. In such category would be comet 81P/Wild 2, whose materials have not experienced aqueous alteration. Other bodies originally volatile-rich that were transiting other regions with higher impact rate were experiencing progressively significant compaction processing, together with subsequent aqueous alteration and loss of volatiles. The release of water from hydrated minerals or interior ices, participated in soaking the forming materials, and transforming their initial mineralogy and physical properties. As a consequence of the physico-chemical evolution promoted by impact processing of undifferentiated bodies, most of the bodies present in the inner solar system are not representative of the planetesimals. Thus, highly porous progenitors and their fragments are the preferential sources of water and organics to the early Earth, even in higher amounts than previously thought.     

Numerical simulations of impacts involving porous bodies: II. Comparison with laboratory experiments

In this paper, we compare the outcome of high-velocity impact experiments on porous targets, composed of pumice, with the results of simulations by a 3D SPH hydrocode in which a porosity model has been implemented. The different populations of small bodies of our Solar System are believed to be composed, at least partially, of objects with a high degree of porosity. To describe the fragmentation of such porous objects, a different model is needed than that used for non-porous bodies. In the case of porous bodies, the impact process is not only driven by the presence of cracks which propagate when a stress threshold is reached, it is also influenced by the crushing of pores and compaction. Such processes can greatly affect the whole body's response to an impact. Therefore, another physical model is necessary to improve our understanding of the collisional process involving porous bodies. Such a model has been developed recently and introduced successfully in a 3D SPH hydrocode [Jutzi, M., Benz, W., Michel, P., 2008. Icarus 198, 242-255]. Basic tests have been performed which already showed that it is implemented in a consistent way and that theoretical solutions are well reproduced. However, its full validation requires that it is also capable of reproducing the results of real laboratory impact experiments. Here we present simulations of laboratory experiments on pumice targets for which several of the main material properties have been measured. We show that using the measured material properties and keeping the remaining free parameters fixed, our numerical model is able to reproduce the outcome of these experiments carried out under different impact conditions. This first complete validation of our model, which will be tested for other porous materials in the future, allows us to start addressing problems at larger scale related to small bodies of our Solar System, such as collisions in the Kuiper Belt or the formation of a family by the disruption of a porous parent body in the main asteroid belt.     

High- and low-velocity impact experiments on porous sintered glass bead targets of different compressive strengths: Outcome sensitivity and scaling

Impact experiments on porous targets consisting of sintered glass beads have been performed at different impact velocities in order to investigate the disruption impact energy threshold (also called Q^∗) of these targets, the influence of the target compressive strength on this threshold and a scaling parameter of the degree of fragmentation that takes into account material strength. A large fraction of small bodies of our Solar System are expected to be composed of highly-porous material. Depending on their location and on the period considered during the Solar System history, these bodies collide with each other at velocities which cover a wide range of values from a few m/s to several km/s. Determining the impact response of porous bodies in both high- and low-velocity regimes is thus crucial to understand their collisional evolution over the entire Solar System history, from the early stages of planetary formation through collisional accretion at low impact velocities to the current and future stages during which impact velocities are much higher and lead to their disruption. While these problems at large scale can only be addressed directly by numerical simulations, small scale impact experiments are a necessary step which allows the understanding of the physical process itself and the determination of the small scale behavior of the material used as target. Moreover, they are crucial to validate numerical codes that can then be applied to larger scales.Sintered glass beads targets of different shapes and porosity have been built and their main material properties, in particular their compressive strength and their porosity, have been measured. The outcomes of their disruptions both at low and high impact velocities have then been analyzed.We then found that the value of Q^∗ strongly depends on the target compressive strength. Measuring the particle velocities as a function of their distance to the impact point, we first found that the attenuation rate of the stress wave in our sintered glass bead targets does not depend on the impact velocity regime. Ejecta velocities as a function of the distance from the impact point can thus be well fitted by a power law with an exponent about −2 in both velocity regimes. We then looked for a scaling parameter that can apply to both regimes. We found that the scaling parameter PI, which is related to the initial peak pressure and to the stress wave attenuation can be used to represent the outcome in a general way. Future investigations will be performed to determine whether these results can be generalized to other kinds of porous materials.     

Experimental study on the collisional disruption of porous gypsum spheres

Abstract— In order to study the catastrophic disruption of porous bodies such as asteroids and planetesimals, we conducted several impact experiments using porous gypsum spheres (porosity: 50%). We investigated the fragment mass and velocity of disrupted gypsum spheres over a wide range of specific energies from 3 times 10³ J/kg to 5 times 10⁴ J/kg. We compared the largest fragment mass (m₁/M_t) and the antipodal velocity (V_a) of gypsum with those of non‐porous materials such as basalt and ice. The results showed that the impact strength of gypsum was notably higher than that of the non‐porous bodies; however, the fragment velocity of gypsum was slower than that of the non‐porous bodies. This was because the micro‐pores dispersed in the gypsum spheres caused a rapid attenuation of shock pressure in them. From these results, we expect that the collisional disruption of porous bodies could be significantly different from that of non‐porous bodies.     

Impact cratering on porous asteroids

The increasing evidence that many or even most asteroids are rubble piles underscores the need to understand how porous structures respond to impact. Experiments are reported in which craters are formed in porous, crushable, silicate materials by impacts at 2 km/s. Target porosity ranged from 34 to 96%. The experiments were performed at elevated acceleration on a centrifuge to provide similarity conditions that reproduce the physics of the formation of asteroid craters as large as several tens of kilometers in diameter.Crater and ejecta blanket formation in these highly porous materials is found to be markedly different from that observed in typical dry soils of low or moderate porosity. In highly porous materials, the compaction of the target material introduces a new cratering mechanism. The ejection velocities are substantially lower than those for impacts in less porous materials. The experiments imply that, while small craters on porous asteroids should produce ejecta blankets in the usual fashion, large craters form without ejecta blankets. In large impacts, most of the ejected material never escapes the crater. However, a significant crater bowl remains because of the volume created by permanent compaction of the target material. Over time, multiple cratering events can significantly increase the global density of an asteroid.     

Ejecta from impact craters

An important feature of impacts into Solar System bodies is the fate of crater ejecta, the near-surface material launched during the highly dynamic crater formation process. Laboratory measurements of impact crater ejecta from 18 studies are summarized. The data are examined and used to assess our understanding of how the ejecta velocity and mass distributions depend on the conditions of an impact event. The effects of impact speed on the ejecta are reasonably well understood, but the dependences on target properties such as strength and porosity are only poorly constrained. A point-source scaling model for the ejecta mass and velocity distributions is developed and fit to the data for several classes of materials distinguished by porosity.     

Impact experiments of porous gypsum-glass bead mixtures simulating parent bodies of ordinary chondrites: Implications for re-accumulation processes related to rubble-pile formation

Laboratory impact experiments were conducted for gypsum-glass bead targets simulating the parent bodies of ordinary chondrites. The effects of the chondrules included in the parent bodies on impact disruption were experimentally investigated in order to determine the impact conditions for the formation of rubble-pile bodies after catastrophic disruption. The targets included glass beads with a diameter ranging from 100 μm to 3 mm and the volume fraction was 0.6, similar to that of ordinary chondrites, which is about 0.65-0.75. Nylon projectiles with diameters of 10 mm and 2 mm were impacted at 60-180 m s⁻¹ by a single-stage gas gun and at 4 km s⁻¹ by a two-stage light gas gun, respectively. The impact strength of the gypsum-glass bead target was found to range from 56 to 116 J kg⁻¹ depending on the glass bead size, and was several times smaller than that of the porous gypsum target, 446 J kg⁻¹ in low-velocity collisions. The impact strengths of the 100 μm bead target and the porous gypsum target strongly depended on the impact velocity: those obtained in high-velocity collisions were several times greater than those obtained in low-velocity collisions. The velocities of fragments ejected from two corners on the impact surface of the target, measured in the center of the mass system, were slightly dependent on the target materials, irrespective of impact velocity. These results suggest that chondrule-including planetesimals (CiPs) can reconstruct rubble-pile bodies in catastrophic disruptions at the size of the planetesimal smaller than that of planetesimals without chondrules.     

A strain-based porosity model for use in hydrocode simulations of impacts and implications for transient crater growth in porous targets

Numerical modelling of impact cratering has reached a high degree of sophistication; however, the treatment of porous materials still poses a large problem in hydrocode calculations. We present a novel approach for dealing with porous compaction in numerical modelling of impact crater formation. In contrast to previous attempts (e.g., P-alpha model, snowplow model), our model accounts for the collapse of pore space by assuming that the compaction function depends upon volumetric strain rather than pressure. Our new ?-alpha model requires only four input parameters and each has a physical meaning. The model is simple and intuitive and shows good agreement with a wide variety of experimental data, ranging from static compaction tests to highly dynamic impact experiments. Our major objective in developing the model is to investigate the effect of porosity and internal friction on transient crater formation. We present preliminary numerical model results that suggest that both porosity and internal friction play an important role in limiting crater growth over a large range in gravity-scaled source size.     

Full numerical simulations of catastrophic small body collisions

The outcome of collisions between small icy bodies, such as Kuiper belt objects, is poorly understood and yet a critical component of the evolution of the trans-neptunian region. The expected physical properties of outer Solar System materials (high porosity, mixed ice-rock composition, and low material strength) pose significant computational challenges. We present results from catastrophic small body collisions using a new hybrid hydrocode to N-body code computational technique. This method allows detailed modeling of shock propagation and material modification as well as gravitational reaccumulation. Here, we consider a wide range of material strengths to span the possible range of Kuiper belt objects. We find that the shear strength of the target is important in determining the collision outcome for 2 to 50-km radius bodies, which are traditionally thought to be in a pure gravity regime. The catastrophic disruption and dispersal criteria, , can vary by up to a factor of three between strong crystalline and weak aggregate materials. The material within the largest reaccumulated remnants experiences a wide range of shock pressures. The dispersal and reaccumulation process results in the material on the surfaces of the largest remnants having experienced a wider range of shock pressures compared to material in the interior. Hence, depending on the initial structure and composition, the surface materials on large, reaccumulated bodies in the outer Solar System may exhibit complex spectral and albedo variations. Finally, we present revised catastrophic disruption criteria for a range of impact velocities and material strengths for outer Solar System bodies.     

Propagation of impact‐induced shock waves in porous sandstone using mesoscale modeling

Generation and propagation of shock waves by meteorite impact is significantly affected by material properties such as porosity, water content, and strength. The objective of this work was to quantify processes related to the shock‐induced compaction of pore space by numerical modeling, and compare the results with data obtained in the framework of the Multidisciplinary Experimental and Modeling Impact Research Network (MEMIN) impact experiments. We use mesoscale models resolving the collapse of individual pores to validate macroscopic (homogenized) approaches describing the bulk behavior of porous and water‐saturated materials in large‐scale models of crater formation, and to quantify localized shock amplification as a result of pore space crushing. We carried out a suite of numerical models of planar shock wave propagation through a well‐defined area (the “sample”) of porous and/or water‐saturated material. The porous sample is either represented by a homogeneous unit where porosity is treated as a state variable (macroscale model) and water content by an equation of state for mixed material (ANEOS) or by a defined number of individually resolved pores (mesoscale model). We varied porosity and water content and measured thermodynamic parameters such as shock wave velocity and particle velocity on meso‐ and macroscales in separate simulations. The mesoscale models provide additional data on the heterogeneous distribution of peak shock pressures as a consequence of the complex superposition of reflecting rarefaction waves and shock waves originating from the crushing of pores. We quantify the bulk effect of porosity, the reduction in shock pressure, in terms of Hugoniot data as a function of porosity, water content, and strength of a quartzite matrix. We find a good agreement between meso‐, macroscale models and Hugoniot data from shock experiments. We also propose a combination of a porosity compaction model (ε–α model) that was previously only used for porous materials and the ANEOS for water‐saturated quartzite (all pore space is filled with water) to describe the behavior of partially water‐saturated material during shock compression. Localized amplification of shock pressures results from pore collapse and can reach as much as four times the average shock pressure in the porous sample. This may explain the often observed localized high shock pressure phases next to more or less unshocked grains in impactites and meteorites.     

PHYSICAL PROPERTIES OF METEORITES AND INTERPLANETARY DUST PARTICLES: CLUES TO THE PROPERTIES OF THE METEORS AND THEIR PARENT BODIES

Meteorites, generally 1 cm or larger in size that are believed to sample asteroids, and interplanetary dust particles (IDPs), generally 5–50 μm in size that are believed to sample both asteroids and comets, span the size range of the meteors. Thus, the physical properties of the meteorites and the IDPs are likely to constrain the properties of the meteors and their parent bodies. Measurements of the density, porosity, longitudinal and transverse speeds of sound, elastic modulus, and bulk modulus, as well as imaging of the internal structure by Computed Microtomography indicate that unweathered samples of chondritic meteorites are more porous and have lower sound velocities than compact terrestrial rocks. In general, the IDPs are even more porous than the chondritic meteorites. The impact energy per unit target mass required to produce a barely catastrophic disruption (Q ^* _D) for anhydrous ordinary chondrite meteorites is twice that for terrestrial basalt or glass, indicating that collisional disruption of anhydrous meteorites requires more energy than for a compact basalt. These results indicate that most stone meteors are likely to be weak, porous objects, and that the parent bodies of the anhydrous stone meteorites are likely to be more difficult to disrupt than compact terrestrial basalt.     

Meteoritic and other constraints on the internal structure and impact history of small asteroids

Studies of the internal structure of asteroids, which are crucial for understanding their impact history and for hazard mitigation, appear to be in conflict for the S-type asteroids, Eros, Gaspra, and Ida. Spacecraft images and geophysical data show that they are fractured, coherent bodies, whereas models of catastrophic asteroidal impacts, family and satellite formation, and studies of asteroid spin rates, and other diverse properties of asteroids and planetary craters suggest that such asteroids are gravitationally bound aggregates of rubble. These conflicting views may be reconciled if 10-50 km S-type asteroids formed as rubble piles, but were later consolidated into coherent bodies. Many meteorites are breccias that testify to a long history of impact fragmentation and consolidation by alteration, metamorphism, igneous and impact processes. Ordinary chondrites, which are the best analogs for S asteroids, are commonly breccias. Some may have formed in cratering events, but many appear to have formed during disruption and reaccretion of their parent asteroids. Some breccias were lithified during metamorphism, and a few were lithified by injected impact melt, but most are regolith and fragmental breccias that were lithified by mild or moderate shock, like their lunar analogs. Shock experiments show that porous chondritic powders can be consolidated during mild shock by small amounts of silicate melt that glues grains together, and by friction and pressure welding of silicate and metallic Fe,Ni grains. We suggest that the same processes that converted impact debris into meteorite breccias also consolidated asteroidal rubble. Internal voids would be partly filled with regolith by impact-induced seismic shaking. Consolidation of this material beneath large craters would lithify asteroidal rubble to form a more coherent body. Fractures on Ida that were created by antipodal impacts and are concentrated in and near large craters, and small positive gravity anomalies associated with the Psyche and Himeros craters on Eros, are consistent with this concept. Spin data suggest that smaller asteroids 0.6-6 km in size are unconsolidated rubble piles. C-type asteroids, which are more porous than S-types, and their analogs, the volatile-rich carbonaceous chondrites, were probably not lithified by shock.     

Numerical modelling of heating in porous planetesimal collisions

Collisions between planetesimals at speeds of several kilometres per second were common during the early evolution of our Solar System. However, the collateral effects of these collisions are not well understood. In this paper, we quantify the efficiency of heating during high-velocity collisions between planetesimals using hydrocode modelling. We conducted a series of simulations to test the effect on shock heating of the initial porosity and temperature of the planetesimals, the relative velocity of the collision and the relative size of the two colliding bodies. Our results show that while heating is minor in collisions between non-porous planetesimals at impact velocities below 10 km s⁻¹, in agreement with previous work, much higher temperatures are reached in collisions between porous planetesimals. For example, collisions between nearly equal-sized, porous planetesimals can melt all, or nearly all, of the mass of the bodies at collision velocities below 7 km s⁻¹. For collisions of small bodies into larger ones, such as those with an impactor-to-target mass ratio below 0.1, significant localised heating occurs in the target body. At impact velocities as low as 5 km s⁻¹, the mass of melt will be nearly double the mass of the impactor, and the mass of material shock heated by 100 K will be nearly 10 times the mass of the impactor. We present a first-order estimate of the cumulative effects of impact heating on a porous planetesimal parent body by simulating the impact of a population of small bodies until a disruptive event occurs. Before disruption, impact heating is volumetrically minor and highly localised; in no case was more than about 3% of the parent body heated by more than 100 K. However, heating during the final disruptive collision can be significant; in about 10% of cases, almost all of the parent body is heated to 700 K (from an initial temperature of ∼300 K) and more than a tenth of the parent body mass is melted. Hence, energetic collisions between planetesimals could have had important effects on the thermal evolution of primitive materials in the early Solar System.     

Ice-silicate fractionation among icy bodies due to the difference of impact strength between ice and ice-silicate mixture

Laboratory experiments on the impact disruption of ice-silicate mixtures were conducted to clarify the accretion process of small icy bodies. Since the icy bodies are composed of ice and silicates with various porosities, we investigated the effect of porosity on the impact disruption of mixtures. We tested the mixture target with the mass ratio of ice to silicate, 0.5 and with 5 different porosities (0, 12.5, 25, 32, 37%) at the impact velocities of 150 to 670 m/s. The silicate mass ratio was changed from 0 to 0.5 in steps of 0.1 at a porosity of 12.5% and a constant impact velocity of about 300 m/s. The impact strength of the mixture was found to decrease with increasing porosity and the silicate mass ratio between 0.1 and 0.5 could enhance the strength of the icy target. The observed dependence of the impact strength on the porosity is opposite to that observed for pure ice. This difference could play an important role in ice-silicate fractionation during the accretion process. Because, ice rich bodies are easily broken as the porosity decreases in their evolution, the collisional growth could be prohibited. On the other hand, among the silicate rich bodies the collisional growth could be enhanced.     

Experimental study on the impact fragmentation of core-mantle bodies: Implications for collisional disruption of rocky planetesimals with sintered core covered with porous mantle

Impact experiments of inhomogeneous targets such as layered bodies consisting of a dense core and porous mantle were conducted to clarify the effect of the layered structure on impact strength. The layered structure of small bodies could be the result of the thermal evolution of planetesimals in the solar nebula. So, the impact disruption of thermally evolved bodies with core-mantle structure is important for the origin of small bodies such as asteroids. We investigated the impact strength of rocky-layered bodies with porous mantle-sintered cores, which could be formed at an initial stage of thermal evolution. Spherical targets composed of soda-lime glass or quartz core and porous gypsum mantle were prepared as an analog of small bodies with a core-mantle structure, and the internal structure was changed. A nylon projectile was impacted at the impact velocity from 1 to 5 km/s. The impact strength of the core-mantle targets decreases with the increase of the core/target mass ratio (RCM) in the specific energy range from 1×¹⁰³ to 4×¹⁰⁴ J/kg. We observed two distinct destruction modes characterized by the damage to the core: one shows a damaged core and fractured mantle, and the other shows an intact core and broken mantle. The former mode was usually observed with increasing RCM, and the boundary condition of the core destruction () was experimentally found to be , where is the specific energy required to disrupt a glass core. From this empirical equation, it might be possible to discuss the destruction conditions of a thermally evolved body with a porous mantle-sintered core structure. We speculate that the impact strength of the body could be significantly reduced with the progress of internal evolution at the initial stage of thermal evolution.     

Numerical modeling of oblique hypervelocity impacts on strong ductile targets

Abstract– The majority of meteorite impacts occur at oblique incidence angles. However, many of the effects of obliquity on impact crater size and morphology are poorly understood. Laboratory experiments and numerical models have shown that crater size decreases with impact angle, the along‐range crater profile becomes asymmetric at low incidence angles, and below a certain threshold angle the crater planform becomes elliptical. Experimental results at approximately constant impact velocity suggest that the elliptical threshold angle depends on target material properties. Herein, we test the hypothesis that the threshold for oblique crater asymmetry depends on target material strength. Three‐dimensional numerical modeling offers a unique opportunity to study the individual effects of both impact angle and target strength; however, a systematic study of these two parameters has not previously been performed. In this work, the three‐dimensional shock physics code iSALE‐3D is validated against laboratory experiments of impacts into a strong, ductile target material. Digital elevation models of craters formed in laboratory experiments were created from stereo pairs of scanning electron microscope images, allowing the size and morphology to be directly compared with the iSALE‐3D craters. The simulated craters show excellent agreement with both the crater size and morphology of the laboratory experiments. iSALE‐3D is also used to investigate the effect of target strength on oblique incidence impact cratering. We find that the elliptical threshold angle decreases with decreasing target strength, and hence with increasing cratering efficiency. Our simulations of impacts on ductile targets also support the prediction from Chapman and McKinnon (1986) that cratering efficiency depends on only the vertical component of the velocity vector.     

The formation of the Baptistina family by catastrophic disruption: Porous versus non‐porous parent body

Abstract— In this paper, we present numerical simulations aimed at reproducing the Baptistina family based on its properties estimated by observations. A previous study by Bottke et al. (2007) indicated that this family is probably at the origin of the K/T impactor, is linked to the CM meteorites and was produced by the disruption of a parent body 170 km in size due to the head‐on impact of a projectile 60 km in size at 3 km s^?1. This estimate was based on simulations of fragmentation of non‐porous materials, while the family was assumed to be of C taxonomic type, which is generally interpreted as being formed from a porous body. Using both a model of fragmentation of non‐porous materials, and a model that we developed recently for porous ones, we performed numerical simulations of disruptions aimed at reproducing this family and at analyzing the differences in the outcome between those two models. Our results show that a reasonable match to the estimated size distribution of the real family is produced from the disruption of a porous parent body by the head‐on impact of a projectile 54 km in size at 3 km s^?1. Thus, our simulations with a model consistent with the assumed dark type of the family requires a smaller projectile than previously estimated, but the difference remains small enough to not affect the proposed scenario of this family history. We then find that the break‐up of a porous body leads to different outcomes than the disruption of a non‐porous one. The real properties of the Baptistina family still contain large uncertainties, and it remains possible that its formation did not involve the proposed impact conditions. However, the simulations presented here already show some range of outcomes and once the real properties are better constrained, it will be easy to check whether one of them provides a good match.     

Delivery of dark material to Vesta via carbonaceous chondritic impacts

NASA’s Dawn spacecraft observations of Asteroid (4) Vesta reveal a surface with the highest albedo and color variation of any asteroid we have observed so far. Terrains rich in low albedo dark material (DM) have been identified using Dawn Framing Camera (FC) 0.75 μm filter images in several geologic settings: associated with impact craters (in the ejecta blanket material and/or on the crater walls and rims); as flow-like deposits or rays commonly associated with topographic highs; and as dark spots (likely secondary impacts) nearby impact craters. This DM could be a relic of ancient volcanic activity or exogenic in origin. We report that the majority of the spectra of DM are similar to carbonaceous chondrite meteorites mixed with materials indigenous to Vesta. Using high-resolution seven color images we compared DM color properties (albedo, band depth) with laboratory measurements of possible analog materials. Band depth and albedo of DM are identical to those of carbonaceous chondrite xenolith-rich howardite Mt. Pratt (PRA) 04401. Laboratory mixtures of Murchison CM2 carbonaceous chondrite and basaltic eucrite Millbillillie also show band depth and albedo affinity to DM. Modeling of carbonaceous chondrite abundance in DM (1–6 vol.%) is consistent with howardite meteorites. We find no evidence for large-scale volcanism (exposed dikes/pyroclastic falls) as the source of DM. Our modeling efforts using impact crater scaling laws and numerical models of ejecta reaccretion suggest the delivery and emplacement of this DM on Vesta during the formation of the ～400 km Veneneia basin by a low-velocity (<2 km/s) carbonaceous impactor. This discovery is important because it strengthens the long-held idea that primitive bodies are the source of carbon and probably volatiles in the early Solar System.     

Impact Experiments on Porous Icy-Silicate Cylindrical Blocks and the Implication for Disruption and Accumulation of Small Icy Bodies

Impact strength and cratering ejecta were studied for porous targets of pure ice and icy-silicate mixture in order to clarify the accumulation and destruction (shattering) condition of small icy bodies. The icy projectile impacted on the cylindrical targets with the porosity up to 55% at a velocity of 150 to 670 m/s at −10°C. The porosity dependence of the impact strength and that of the maximum ejecta velocity were measured in each type of these targets. As a result, the maximum ejecta velocity normalized by the impact velocity (V_e-max/V_i) is found to depend only on the porosity (φ), irrespective of the target type; a relationship is derived to be V_e-max/V_i=−2.17φ+1.29. The impact strength of pure ice increased with increased target porosity, but that of mixture target had an opposite trend; that is, the strength decreased with increased porosity. These porosity dependencies of the impact strength could be explained by the porosity dependence of the physical parameters such as impact pressure, pressure decay, and static strength. Finally, the accumulation of small icy bodies is discussed to show that the collisional events can be divided into three types by the porosity and the collision velocity according to our experimental results: mass loss, rubble pile formation, and regolith formation (compaction).