Annual fluctuations in sulfur isotope fractionation in the water column of a euxinic marine basin

The sulfur cycle of Mariager Fjord was studied by following the pool of sulfide in the anoxic water and its isotopic composition during a period of 3 yr. Though most of the sulfide accumulating in the fjord was formed in the sediment, the isotopic composition of sulfide in the water was different from the isotopic composition of sulfide diffusing into the water from the sediment. The mean isotopic composition of the water column sulfide (δ³⁴S) varied during the year between −13‰ and −21‰ with the most negative values reached during winter/early spring, while the sulfide diffusing into the water from the sediment had a mean isotope composition of −11.3‰. This annual pattern suggested that processes in the oxidative part of the sulfur cycle were responsible for the excess fractionation, and mass-balance considerations indicated that the excess fractionation of the sulfur isotopes could be accounted for by disproportionation of S⁰ or S₂O₃²⁻ in the water column, but not by water column sulfate reduction or sulfide oxidation alone. MPN counts demonstrated that a population of more than 3 × 10⁴ cells mL⁻¹ capable of growing by disproportionation of these two substrates was present in all depths of the fjord. The results presented in this communication demonstrate that the isotopic depletion of sulfide in anoxic systems may vary between periods of net sulfate reduction versus periods of net sulfide oxidation and indicate that disproportionation of sulfur compounds may be an important step in the sulfur cycle of euxinic basins.     

Biogeochemistry of sulfur and iron in Thioploca-colonized surface sediments in the upwelling area off central chile

The biogeochemistry of sedimentary sulfur was investigated on the continental shelf off central Chile at water depths between 24 and 88 m under partial influence of an oxygen minimum zone. Dissolved and solid iron and sulfur species, including the sulfur intermediates sulfite, thiosulfate, and elemental sulfur, were analyzed at high resolution in the top 20 cm. All stations were characterized by high rates of sulfate reduction, but only the sediments within the Bay of Concepción contained dissolved sulfide. Due to advection and/or in-situ reoxidation of sulfide, dissolved sulfate was close to bottom water values. Whereas the concentrations of sulfite and thiosulfate were mostly in the submicromolar range, elemental sulfur was by far the dominant sulfur intermediate. Although the large nitrate- and sulfur-storing bacteria Thioploca were abundant, the major part of S⁰ was located extracellularly. The distribution of sulfur species and dissolved iron suggests the reaction of sulfide with FeOOH as an important pathway for sulfide oxidation and sulfur intermediate formation. This is in agreement with the sulfur isotope composition of co-existing elemental sulfur and iron monosulfides. In the Bay of Concepción, sulfur isotope data suggest that pyrite formation proceeds via the reaction of FeS with polysulfides or H₂S. At the shelf stations, on the other hand, pyrite was significantly depleted in ³⁴S relative to its potential precursors FeS and S⁰. Isotope mass balance considerations suggest further that pyritization at depth includes light sulfide, potentially originating from bacterial sulfur disproportionation. The δ³⁴S-values of pyrite down to −38‰ vs. V-CDT are among the lightest found in organic-rich marine sediments. Seasonal variations in the sulfur isotope composition of dissolved sulfate indicated a dynamic non-steady-state sulfur cycle in the surface sediments. The ¹⁸O content of porewater sulfate increased with depth at all sites compared to the bottom water composition due to intracellular isotope exchange reactions during microbial sulfur transformations.     

Particulate sulfur species in the water column of the Cariaco Basin

The biogeochemistry of iron sulfide minerals in the water column of the Cariaco Basin was investigated in November 2007 (non-upwelling season) and May 2008 (upwelling season) as part of the on-going CARIACO (CArbon Retention In A Colored Ocean) time series project. The concentrations of particulate sulfur species, specifically acid volatile sulfur (AVS), greigite, pyrite, and particulate elemental sulfur, were determined at high resolution near the O₂/H₂S interface. In November 2007, AVS was low throughout the water column, with the highest concentration at the depth where sulfide was first detected (260 m) and with a second peak at 500 m. Greigite, pyrite, and particulate elemental sulfur showed distinct concentration maxima near the interface. In May 2008, AVS was not detected in the water column. Maxima for greigite, pyrite, and particulate elemental sulfur were again observed near the interface. We also studied the iron sulfide flux using sediment trap materials collected at the Cariaco station. Pyrite comprised 0.2-0.4% of the total particulate flux in the anoxic water column, with a flux of 0.5-1.6 mg S m⁻² d⁻¹.Consistent with the water column concentration profiles for iron sulfide minerals, the sulfur isotope composition of particulate sulfur found in deep anoxic traps was similar to that of dissolved sulfide near the O₂/H₂S interface. We conclude that pyrite is formed mainly within the redoxcline where sulfur cycling imparts a distinct isotopic signature compared to dissolved sulfide in the deep anoxic water. This conclusion is consistent with our previous study of sulfur species and chemoautotrophic production, which suggests that reaction of sulfide with reactive iron is an important pathway for sulfide oxidation and sulfur intermediate formation near the interface. Pyrite and elemental sulfur distributions favor a pathway of pyrite formation via the reaction of FeS with polysulfides or particulate elemental sulfur near the interface. A comparison of thermodynamic predictions with actual concentration profiles for iron sulfides leads us to argue that microbes may mediate this precipitation.     

A cryptic sulfur cycle driven by iron in the methane zone of marine sediment (Aarhus Bay, Denmark)

Sulfate reduction and sulfur-iron geochemistry were studied in 5-6 m deep gravity cores of Holocene mud from Aarhus Bay (Denmark). A goal was to understand whether sulfate is generated by re-oxidation of sulfide throughout the sulfate and methane zones, which might explain the abundance of active sulfate reducers deep below the main sulfate zone. Sulfate penetrated down to 130 cm where methane started to build up and where the concentration of free sulfide peaked at 5.5 mM. Below this sulfate-methane transition, sulfide diffused downwards to a sulfidization front at 520 cm depth, below which dissolved iron, Fe²⁺, accumulated in the pore water. Sulfate reduction rates measured by ³⁵S-tracer incubations in the sulfate zone were high due to high concentrations of reactive organic matter. Within the sulfate-methane transition, sulfate reduction was distinctly stimulated by the anaerobic oxidation of methane. In the methane zone below, sulfate remained at positive “background” concentrations of <0.5 mM down to the sulfidization front. Sulfate reduction decreased steeply to rates which at 300-500 cm depth were 0.2-1 pmol SO₄²⁻ cm⁻³ d⁻¹, i.e., 4-5 orders of magnitude lower than rates measured near the sediment surface. The turn-over time of sulfate increased from 3 years at 12 cm depth to 100-1000 years down in the methane zone. Sulfate reduction in the methane zone accounted for only 0.1% of sulfate reduction in the entire sediment column and was apparently limited by the low pore water concentration of sulfate and the low availability of organic substrates. Amendment of the sediment with both sulfate and organic substrates immediately caused a 10- to 40-fold higher, “potential sulfate reduction” which showed that a physiologically intact community of sulfate reducing bacteria was present. The “background” sulfate concentration appears to be generated from the reaction of downwards diffusing sulfide with deeply buried Fe(III) species, such as poorly-reactive iron oxides or iron bound in reactive silicates. The oxidation of sulfide to sulfate in the sulfidic sediment may involve the formation of elemental sulfur and thiosulfate and their further disproportionation to sulfide and sulfate. The net reaction of sulfide and Fe(III) to form pyrite requires an additional oxidant, irrespective of the formation of sulfate. This could be CO₂ which is reduced with H₂ to methane. The methane subsequently diffuses upwards to become re-oxidized at the sulfate-methane transition and thereby removes excess reducing power and enables the formation of excess sulfate. We show here how the combination of these well-established sulfur-iron-carbon reactions may lead to the deep formation of sulfate and drive a cryptic sulfur cycle. The iron-rich post-glacial sediments underlying Holocene marine mud stimulate the strong sub-surface sulfide reoxidation observed in Aarhus Bay and are a result of the glacial to interglacial history of the Baltic Sea area. Yet, processes similar to the ones described here probably occur widespread in marine sediments, in particular along the ocean margins.     

Stable Sulfur Isotopic Evidence for Historical Changes of Sulfur Cycling in Estuarine Sediments from Northern Florida

Data on abundance and isotopic composition of porewater and sedimentary sulfur species are reported for relatively uncontaminated and highly contaminated fine-grained anoxic sediments of St. Andrew Bay, Florida. A strong contrast in amount and composition of sedimentary organic matter at the two sites allows a comparative study of the historical effects of increased organic loading on sulfur cycling and sulfur isotopic fractionation. In the contaminated sediments, an increase in organic loading caused increased sedimentary carbon/sulfur ratios and resulted in higher rates of bacterial sulfate reduction, but a lower efficiency of sulfide oxidation. These differences are well reflected in the isotopic composition of dissolved sulfate, sulfide, and sedimentary pyrite. Concentration and isotopic profiles of dissolved sulfate, organic carbon, and total sulfur suggest that the anaerobic decomposition of organic matter is most active in the upper 8cm but proceeds at very slow rates below this depth. The rapid formation of more than 90% of pyrite in the uppermost 2 cm which corresponds to about 3 years of sediment deposition allows the use of pyrite isotopic composition for tracing changing diagenetic conditions. Sediment profiles of the sulfur isotopic composition of pyrite reflect present-day higher rates of bacterial sulfate reduction and lower rates of sulfide oxidation, and record a profound change in the diagenetic cycling of sulfur in the contaminated sediments coincident with urban and industrial development of the St. Andrew Bay area.     

Geochemical and anthropogenic enrichments of Mo in sediments from perennially oxic and seasonally anoxic lakes in Eastern Canada

We measured the vertical distributions of Mo, Fe, Mn, sulfide, sulfate, organic carbon, major ions, and pH in sediment porewater from one perennially oxic and three seasonally anoxic lacustrine basins in Eastern Canada, as well as those of Mo, acid volatile sulfide, Fe, Mn, Al, organic C, ²¹⁰Pb and ¹³⁷Cs in sediment cores from the same sites. The only input of anthropogenic Mo to these lakes comes from atmospheric deposition.The relatively monotonous distribution of Mo in the porewater of three seasonally anoxic basins suggests that Mo is not redistributed in the sedimentary column during periods of anoxia. In contrast, porewater Mo profiles obtained at three sampling dates in a perennially oxic basin display sharp Mo peaks below the sediment-water interface, indicating redistribution subsequent to deposition. Modeling of these latter porewater Mo profiles with a diagenetic reaction-transport equation coupled to comparisons among the various porewater and solid phase profiles reveal that Mo is released at 1-2 cm depth as a consequence of the reductive dissolution of Fe oxyhydroxides and scavenged both at the vicinity of the sediment-water interface, by re-adsorption onto authigenic Fe oxyhydroxides, and deeper in the sediments where dissolved sulfide concentrations are higher. The estimated rate constant for the adsorption of Mo onto Fe oxyhydroxides is 36 ± 45 cm³ mol⁻¹ s⁻¹.Diagenetic modeling indicates that authigenic Mo in sediments of the perennially oxic basin represents about one-third of the total solid phase Mo in the first cm below the sediment-water interface and only one tenth below this horizon. If we assume that no authigenic Mo is accumulated in the seasonally anoxic lake sediments we conclude that the sediment Mo concentrations, which are up to 3-16 times higher than the average lithogenic composition, depending on the lake, are mainly due to atmospheric deposition of anthropogenic Mo and not to the formation of authigenic Mo phases. Reconstructed historical records of the atmospheric Mo deposition indicate maximum values in the 1970s and 1980s and significant decreases since then. Emissions to the atmosphere associated with the smelting of non-ferrous ores and coal combustion appear to be the most important sources of anthropogenic Mo.     

The effect of early diagenesis on the Fe isotope compositions of porewaters and authigenic minerals in continental margin sediments

Iron isotope compositions in marine pore fluids and sedimentary solid phases were measured at two sites along the California continental margin, where isotope compositions range from δ⁵⁶Fe = −3.0‰ to +0.4‰. At one site near Monterey Canyon off central California, organic matter oxidation likely proceeds through a number of diagenetic pathways that include significant dissimilatory iron reduction (DIR) and bacterial sulfate reduction, whereas at our other site in the Santa Barbara basin DIR appears to be comparatively small, and production of sulfides (FeS and pyrite) was extensive. The largest range in Fe isotope compositions is observed for Fe(II)_aq in porewaters, which generally have the lowest δ⁵⁶Fe values (minimum: −3.0‰) near the sediment surface, and increase with burial depth. δ⁵⁶Fe values for FeS inferred from HCl extractions vary between ∼−0.4‰ and +0.4‰, but pyrite is similar at both stations, where an average δ⁵⁶Fe value of −0.8 ± 0.2‰ was measured. We interpret variations in dissolved Fe isotope compositions to be best explained by open-system behavior that involves extensive recycling of Feflux. This study is the first to examine Fe isotope variations in modern marine sediments, and the results show that Fe isotopes in the various reactive Fe pools undergo isotopic fractionation during early diagenesis. Importantly, processes dominated by sulfide formation produce high-δ⁵⁶Fe values for porewaters, whereas the opposite occurs when Fe(III)-oxides are present and DIR is a major pathway of organic carbon respiration. Because shelf pore fluids may carry a negative δ⁵⁶Fe signature it is possible that the Fe isotope composition of ocean water reflects a significant contribution of shelf-derived iron to the open ocean. Such a signature would be an important means for tracing iron sources to the ocean and water mass circulation.     

Quadruple sulfur isotope analysis of ca. 3.5 Ga Dresser Formation: New evidence for microbial sulfate reduction in the early Archean

Multiple sulfur isotope system is a powerful new tracer for atmospheric, volcanic, and biological influences on sulfur cycles in the anoxic early Earth. Here, we report high-precision quadruple sulfur isotope analyses (³²S/³³S/³⁴S/³⁶S) of barite, pyrite in barite, and sulfides in related hydrothermal and igneous rocks occurring in the ca. 3.5 Ga Dresser Formation, Western Australia. Our results indicate that observed isotopic variations are mainly controlled by mixing of mass-dependently (MD) and non-mass-dependently fractionated (non-MD) sulfur reservoirs. Based on the quadruple sulfur isotope systematics (δ³⁴S-Δ³³S-Δ³⁶S) for these minerals, four end-member sulfur reservoirs have been recognized: (1) non-MD sulfate (δ³⁴S = −5 ± 2‰; Δ³³S = −3 ± 1‰); (2) MD sulfate (δ³⁴S = +10 ± 3‰); (3) non-MD sulfur (δ³⁴S > +6‰; Δ³³S > +4‰); and (4) igneous MD sulfur (δ³⁴S = Δ³³S = 0‰). The first and third components show a clear non-MD signatures, thus probably represent sulfate and sulfur aerosol inputs. The MD sulfate component (2) is enriched in ³⁴S (+10 ± 3‰) and may have originated from microbial and/or abiotic disproportionation of volcanic S or SO₂. Our results reconfirm that the Dresser barites contain small amounts of pyrite depleted in ³⁴S by 15-22‰ relative to the host barite. These barite-pyrite pairs exhibit a mass-dependent relationship of δ³³S/δ³⁴S with slope less than 0.512, which is consistent with that expected for microbial sulfate reduction and is significantly different from that of equilibrium fractionation (0.515). The barite-pyrite pairs also show up to 1‰ difference in Δ³⁶S values and steep Δ³⁶S/Δ³³S slopes, which deviate from the main Archean array (Δ³⁶S/Δ³³S = −0.9) and are comparable to isotope effects exhibited by sulfate reducing microbes (Δ³⁶S/Δ³³S = −5 to −11). These new lines of evidence support the existence of sulfate reducers at ca. 3.5 Ga, whereas microbial sulfur disproportionation may have been more limited than recently suggested.     

Methane and sulfide fluxes in permanent anoxia: In situ studies at the Dvurechenskii mud volcano (Sorokin Trough, Black Sea)

The Dvurechenskii mud volcano (DMV) is located in permanently anoxic waters at 2060 m depth (Sorokin Trough, Black Sea). The DMV was studied during the RV Meteor expedition M72/2 as an example of an active mud volcano system, to investigate the significance of submarine mud volcanism for the methane and sulfide budget of the anoxic Black Sea hydrosphere. Our studies included benthic fluxes of methane and sulfide, as well as the factors controlling transport, consumption and production of both compounds within the sediment. The pie-shaped mud volcano showed temperature anomalies as well as solute and gas fluxes indicating high fluid flow at its summit north of the geographical center. The anaerobic oxidation of methane (AOM) coupled to sulfate reduction (SR) was repressed in this zone due to the upward flow of sulfate-depleted fluids through recently deposited subsurface muds, apparently limiting microbial methanotrophic activity. Consequently, the emission of dissolved methane into the water column was high, with an estimated rate of 0.46 mol m⁻² d⁻¹. On the wide plateau and edge of the mud volcano surrounding the summit, fluid flow and total methane flux were lower, allowing higher SR and AOM rates correlated with an increase in sulfate penetration into the sediment. Here, between 50% and 70% of the methane flux (0.07-0.1 mol m⁻² d⁻¹) was consumed within the upper 10 cm of the sediment. The overall amount of dissolved methane released from the entire mud volcano structure into the water column was significant with a discharge of 1.3 × 10⁷ mol yr⁻¹. The DMV maintains also high areal rates of methane-fueled sulfide production and emission of on average 0.05 mol m⁻² d⁻¹. This is a difference to mud volcanoes in oxic waters, which emit similar amounts of methane, but not sulfide. However, based on a comparison of this and other mud volcanoes of the Black Sea, we conclude that sulfide and methane emission into the hydrosphere from deep-water mud volcanoes does not significantly contribute to the sulfide and methane inventory of the Black Sea.     

Pathways and regulation of carbon, sulfur and energy transfer in marine sediments overlying methane gas hydrates on the Opouawe Bank (New Zealand)

This study combines sediment geochemical analysis, in situ benthic lander deployments and numerical modeling to quantify the biogeochemical cycles of carbon and sulfur and the associated rates of Gibbs energy production at a novel methane seep. The benthic ecosystem is dominated by a dense population of tube-building ampharetid polychaetes and conspicuous microbial mats were unusually absent. A 1D numerical reaction-transport model, which allows for the explicit growth of sulfide and methane oxidizing microorganisms, was tuned to the geochemical data using a fluid advection velocity of 14 cm yr⁻¹. The fluids provide a deep source of dissolved hydrogen sulfide and methane to the sediment with fluxes equal to 4.1 and 18.2 mmol m⁻² d⁻¹, respectively. Chemosynthetic biomass production in the subsurface sediment is estimated to be 2.8 mmol m⁻² d⁻¹ of C biomass. However, carbon and oxygen budgets indicate that chemosynthetic organisms living directly above or on the surface sediment have the potential to produce 12.3 mmol m⁻² d⁻¹ of C biomass. This autochthonous carbon source meets the ampharetid respiratory carbon demand of 23.2 mmol m⁻² d⁻¹ to within a factor of 2. By contrast, the contribution of photosynthetically-fixed carbon sources to ampharetid nutrition is minor (3.3 mmol m⁻² d⁻¹ of C). The data strongly suggest that mixing of labile autochthonous microbial detritus below the oxic layer sustains high measured rates of sulfate reduction in the uppermost 2 cm of the sulfidic sediment (100-200 nmol cm⁻³ d⁻¹). Similar rates have been reported in the literature for other seeps, from which we conclude that autochthonous organic matter is an important substrate for sulfate reducing bacteria in these sediment layers. A system-scale energy budget based on the chemosynthetic reaction pathways reveals that up to 8.3 kJ m⁻² d⁻¹ or 96 mW m⁻² of catabolic (Gibbs) energy is dissipated at the seep through oxidation reactions. The microorganisms mediating sulfide oxidation and anaerobic oxidation of methane (AOM) produce 95% and 2% of this energy flux, respectively. The low power output by AOM is due to strong bioenergetic constraints imposed on the reaction rate by the composition of the chemical environment. These constraints provide a high potential for dissolved methane efflux from the sediment (12.0 mmol m⁻² d⁻¹) and indicates a much lower efficiency of (dissolved) methane sequestration by AOM at seeps than considered previously. Nonetheless, AOM is able to consume a third of the ascending methane flux (5.9 mmol m⁻² d⁻¹ of CH₄) with a high efficiency of energy expenditure (35 mmol CH₄ kJ⁻¹). It is further proposed that bioenergetic limitation of AOM provides an explanation for the non-zero sulfate concentrations below the AOM zone observed here and in other active and passive margin sediments.     

An integrated sulfur isotope model for Namibian shelf sediments

In this study the sulfur cycle in the organic-rich mud belt underlying the highly productive upwelling waters of the Namibian shelf is quantified using a 1D reaction-transport model. The model calculates vertical concentration and reaction rate profiles in the top 500 cm of sediment which are compared to a comprehensive dataset which includes carbon, sulfur, nitrogen and iron compounds as well as sulfate reduction (SR) rates and stable sulfur isotopes (³²S, ³⁴S). The sulfur dynamics in the well-mixed surface sediments are strongly influenced by the activity of the large sulfur bacteria Thiomargaritanamibiensis which oxidize sulfide (H₂S) to sulfate () using sea water nitrate () as the terminal electron acceptor. Microbial sulfide oxidation (SOx) is highly efficient, and the model predicts intense cycling between and H₂S driven by coupled SR and SOx at rates exceeding 6.0 mol S m⁻² y⁻¹. More than 96% of the SR is supported by SOx, and only 2-3% of the pool diffuses directly into the sediment from the sea water. A fraction of the produced by Thiomargarita is drawn down deeper into the sediment where it is used to oxidize methane anaerobically, thus preventing high methane concentrations close to the sediment surface. Only a small fraction of total H₂S production is trapped as sedimentary sulfide, mainly pyrite (FeS₂) and organic sulfur (S_org) (∼0.3 wt.%), with a sulfur burial efficiency which is amongst the lowest values reported for marine sediments (<1%). Yet, despite intense SR, FeS₂ and S_org show an isotope composition of ∼5 ‰ at 500 cm depth. These heavy values were simulated by assuming that a fraction of the solid phase sulfur exchanges isotopes with the dissolved sulfide pool. An enrichment in H₂S of ³⁴S towards the sediment-water interface suggests that Thiomargarita preferentially remove H₂³²S from the pore water. A fractionation of 20-30‰ was estimated for SOx (ε_SOx) with the model, along with a maximum fractionation for SR (ε_SR-max) of 100‰. These values are far higher than previous laboratory-based estimates for these processes. Mass balance calculations indicate negligible disproportionation of autochthonous elemental sulfur; an explanation routinely cited in the literature to account for the large fractionations in SR. Instead, the model indicates that repeated multi-stepped sulfide oxidation and intracellular disproportionation by Thiomargarita could, in principle, allow the measured isotope data to be simulated using much lower fractionations for ε_SOx (5‰) and ε_SR (78‰).     

Sulfide-driven arsenic mobilization from arsenopyrite and black shale pyrite

We examined the hypothesis that sulfide drives arsenic mobilization from pyritic black shale by a sulfide-arsenide exchange and oxidation reaction in which sulfide replaces arsenic in arsenopyrite forming pyrite, and arsenide (As−1) is concurrently oxidized to soluble arsenite (As+3). This hypothesis was tested in a series of sulfide-arsenide exchange experiments with arsenopyrite (FeAsS), homogenized black shale from the Newark Basin (Lockatong formation), and pyrite isolated from Newark Basin black shale incubated under oxic (21% O₂), hypoxic (2% O₂, 98% N₂), and anoxic (5% H₂, 95% N₂) conditions. The oxidation state of arsenic in Newark Basin black shale pyrite was determined using X-ray absorption-near edge structure spectroscopy (XANES). Incubation results show that sulfide (1 mM initial concentration) increases arsenic mobilization to the dissolved phase from all three solids under oxic and hypoxic, but not anoxic conditions. Indeed under oxic and hypoxic conditions, the presence of sulfide resulted in the mobilization in 48 h of 13-16 times more arsenic from arsenopyrite and 6-11 times more arsenic from isolated black shale pyrite than in sulfide-free controls. XANES results show that arsenic in Newark Basin black shale pyrite has the same oxidation state as that in FeAsS (−1) and thus extend the sulfide-arsenide exchange mechanism of arsenic mobilization to sedimentary rock, black shale pyrite. Biologically active incubations of whole black shale and its resident microorganisms under sulfate reducing conditions resulted in sevenfold higher mobilization of soluble arsenic than sterile controls. Taken together, our results indicate that sulfide-driven arsenic mobilization would be most important under conditions of redox disequilibrium, such as when sulfate-reducing bacteria release sulfide into oxic groundwater, and that microbial sulfide production is expected to enhance arsenic mobilization in sedimentary rock aquifers with major pyrite-bearing, black shale formations.     

Oxygen and sulfur isotope systematics of sulfate produced by bacterial and abiotic oxidation of pyrite

To better understand reaction pathways of pyrite oxidation and biogeochemical controls on δ¹⁸O and δ³⁴S values of the generated sulfate in acid mine drainage (AMD) and other natural environments, we conducted a series of pyrite oxidation experiments in the laboratory. Our biological and abiotic experiments were conducted under aerobic conditions by using O₂ as an oxidizing agent and under anaerobic conditions by using dissolved Fe(III)_aq as an oxidant with varying δ¹⁸O_H2O values in the presence and absence of Acidithiobacillus ferrooxidans. In addition, aerobic biological experiments were designed as short- and long-term experiments where the final pH was controlled at ∼2.7 and 2.2, respectively. Due to the slower kinetics of abiotic sulfide oxidation, the aerobic abiotic experiments were only conducted as long term with a final pH of ∼2.7. The δ³⁴S_SO4 values from both the biological and abiotic anaerobic experiments indicated a small but significant sulfur isotope fractionation (∼−0.7‰) in contrast to no significant fractionation observed from any of the aerobic experiments. Relative percentages of the incorporation of water-derived oxygen and dissolved oxygen (O₂) to sulfate were estimated, in addition to the oxygen isotope fractionation between sulfate and water, and dissolved oxygen. As expected, during the biological and abiotic anaerobic experiments all of the sulfate oxygen was derived from water. The percentage incorporation of water-derived oxygen into sulfate during the oxidation experiments by O₂ varied with longer incubation and lower pH, but not due to the presence or absence of bacteria. These percentages were estimated as 85%, 92% and 87% from the short-term biological, long-term biological and abiotic control experiments, respectively. An oxygen isotope fractionation effect between sulfate and water (ε¹⁸O_SO4-H2O) of ∼3.5‰ was determined for the anaerobic (biological and abiotic) experiments. This measured value was then used to estimate the oxygen isotope fractionation effects between sulfate and dissolved oxygen in the aerobic experiments which were −10.0‰, −10.8‰, and −9.8‰ for the short-term biological, long-term biological and abiotic control experiments, respectively. Based on the similarity between δ¹⁸O_SO4 values in the biological and abiotic experiments, it is suggested that δ¹⁸O_SO4 values cannot be used to distinguish biological and abiotic mechanisms of pyrite oxidation. The results presented here suggest that Fe(III)_aq is the primary oxidant for pyrite at pH < 3, even in the presence of dissolved oxygen, and that the main oxygen source of sulfate is water-oxygen under both aerobic and anaerobic conditions.     

Constraining atmospheric oxygen and seawater sulfate concentrations during Paleoproterozoic glaciation: In situ sulfur three-isotope microanalysis of pyrite from the Turee Creek Group, Western Australia

Previous efforts to constrain the timing of Paleoproterozoic atmospheric oxygenation have documented the disappearance of large, mass-independent sulfur isotope fractionation and an increase in mass-dependent sulfur isotope fractionation associated with multiple glaciations. At least one of these glacial events is preserved in diamictites of the ∼2.4 Ga Meteorite Bore Member of the Kungarra Formation, Turee Creek Group, Western Australia. Outcrop exposures of this unit show the transition from the Boolgeeda Iron Formation of the upper Hamersley Group into clastic, glaciomarine sedimentary rocks of the Turee Creek Group. Here we report in situ multiple sulfur isotope and elemental abundance measurements of sedimentary pyrite at high spatial resolution, as well as the occurrence of detrital pyrite in the Meteorite Bore Member. The 15.3‰ range of Δ³³S in one sample containing detrital pyrite (−3.6‰ to 11.7‰) is larger than previously reported worldwide, and there is evidence for mass-independent sulfur isotope fractionation in authigenic pyrite throughout the section (Δ³³S from −0.8‰ to 1.0‰). The 90‰ range in δ³⁴S observed (−45.5‰ to 46.4‰) strongly suggests microbial sulfate reduction under non-sulfate limiting conditions, indicating significant oxidative weathering of sulfides on the continents. Multiple generations of pyrite are preserved, typically represented by primary cores with low δ³⁴S (<−20‰) overgrown by euhedral rims with higher δ³⁴S (4-7‰) and enrichments in As, Ni, and Co. The preservation of extremely sharp sulfur isotope gradients (30‰/<4 μm) implies limited sulfur diffusion and provides time and temperature constraints on the metamorphic history of the Meteorite Bore Member. Together, these results suggest that the Meteorite Bore Member was deposited during the final stages of the “Great Oxidation Event,” when pO₂ first became sufficiently high to permit pervasive oxidative weathering of continental sulfides, yet remained low enough to permit the production and preservation of mass-independent sulfur isotope fractionation.     

Sedimentary iron geochemistry in acidic waterways associated with coastal lowland acid sulfate soils

We examined the solubility, mineralogy and geochemical transformations of sedimentary Fe in waterways associated with coastal lowland acid sulfate soils (CLASS). The waterways contained acidic (pH 3.26-3.54), Fe^III-rich (27-138 μM) surface water with low molar Cl:SO₄ ratios (0.086-5.73). The surficial benthic sediments had high concentrations of oxalate-extractable Fe(III) due to schwertmannite precipitation (kinetically favoured by 28-30% of aqueous surface water Fe being present as the Fe^III species). Subsurface sediments contained abundant pore-water HCO₃ (6-20 mM) and were reducing (Eh < −100 mV) with pH 6.0-6.5. The development of reducing conditions caused reductive dissolution of buried schwertmannite and goethite (formed via in situ transformation of schwertmannite). As a consequence, pore-water Fe^II concentrations were high (>2 mM) and were constrained by precipitation-dissolution of siderite. The near-neutral, reducing conditions also promoted SO₄-reduction and the formation of acid-volatile sulfide (AVS). The results show, for the first time for CLASS-associated waterways, that sedimentary AVS consisted mainly of disordered mackinawite. In the presence of abundant pore-water Fe^II, precipitation-dissolution of disordered mackinawite maintained very low (i.e. <0.1 μM) S^−II concentrations. Such low concentrations of S^−II caused slow rates for conversion of disordered mackinawite to pyrite, thereby resulting in relatively low concentrations of pyrite (<300 μmol g⁻¹ as Fe) compared to disordered mackinawite (up to 590 μmol g⁻¹ as Fe). This study shows that interactions between schwertmannite, goethite, siderite, disordered mackinawite and pyrite control the geochemical behaviour of sedimentary Fe in CLASS-associated waterways.     

Kinetics of arsenopyrite oxidative dissolution by oxygen

We used a mixed flow reactor system to determine the rate and infer a mechanism for arsenopyrite (FeAsS) oxidation by dissolved oxygen (DO) at 25 °C and circumneutral pH. Results indicate that under circumneutral pH (6.3-6.7), the rate of arsenopyrite oxidation, 10^{−10.14±0.03} mol m⁻² s⁻¹, is essentially independent of DO over the geologically significant range of 0.3-17 mg L⁻¹. Arsenic and sulfur are released from arsenopyrite in an approximate 1:1 molar ratio, suggesting that oxidative dissolution by oxygen under circumneutral pH is congruent. Slower rates of iron release from the reactor indicate that some of the iron is lost from the effluent by oxidation to Fe(III) which subsequently hydrolyzes and precipitates. Using the electrochemical cell model for understanding sulfide oxidation, our results suggest that the rate-determining step in arsenopyrite oxidation is the reduction of water at the anodic site rather than the transfer of electrons from the cathodic site to oxygen as has been suggested for other sulfide minerals such as pyrite.     

Geochemistry of Peruvian near-surface sediments

Sixteen short sediment cores were recovered from the upper edge (UEO), within (WO) and below (BO) the oxygen minimum zone (OMZ) off Peru during cruise 147 of R/V Sonne. Solids were analyzed for major/trace elements, total organic carbon, total inorganic carbon, total sulfur, the stable sulfur isotope composition (δ³⁴S) of pyrite, and sulfate reduction rates (SRR). Pore waters were analyzed for dissolved sulfate/sulfide and δ³⁴S of sulfate. In all cores highest SRR were observed in the top 5 cm where pore water sulfate concentrations varied little due to resupply of sulfate by sulfide oxidation and/or diffusion of sulfate from bottom water. δ³⁴S of dissolved sulfate showed only minor downcore increases. Strong ³²S enrichments in sedimentary pyrite (to −48‰ vs. V-CDT) are due to processes in the oxidative part of the sulfur cycle in addition to sulfate reduction. Manganese and Co are significantly depleted in Peruvian upwelling sediments most likely due to mobilization from particles settling through the OMZ, whereas release of both elements from reducing sediments only seems to occur in near-coastal sites. Cadmium, Mo and Re are exceptionally enriched in WO sediments (<600 m water depth). High Re and moderate Cd and Mo enrichments are seen in BO sediments (>600 m water depth). Re/Mo ratios indicate anoxic and suboxic conditions for WO and BO sediments, respectively. Cadmium and Mo downcore profiles suggest considerable contribution to UEO/WO sediments by a biodetrital phase, whereas Re presumably accumulates via diffusion across the sediment-water interface to precipitation depth. Uranium is distinctly enriched in WO sediments (due to sulfidic conditions) and in some BO sediments (due to phosphorites). Silver transfer to suboxic BO sediments is likely governed by diatomaceous matter input, whereas in anoxic WO sediments Ag is presumably trapped due to sulfide precipitation. Cadmium, Cu, Zn, Ni, Cr, Ag, and T1 predominantly accumulate via biogenic pre-concentration in plankton remains. Rhenium, Sb, As, V, U and Mo are enriched in accordance with seawater TE availability. Lead and Bi enrichment in UEO surface sediments is likely contributed by anthropogenic activity (mining). Accumulation rates of TOC, Cd, Mo, U, and V from Peruvian and Namibian sediments exceed those from the Oman Margin and Gulf of California due to enhanced preservation off Peru and Namibia.     

Sulfide oxidation and distribution of metals near abandoned copper mines in coastal environments,Prince William Sound,Alaska, USA

The oxidation of sulfide-rich rocks, mostly leftover debris from Cu mining in the early 20th century, is contributing to metal contamination of local coastal environments in Prince William Sound, Alaska. Analyses of sulfide, water, sediment, precipitate and biological samples from the Beatson, Ellamar, and Threeman mine sites show that acidic surface waters generated from sulfide weathering are pathways for redistribution of environmentally important elements into and beyond the intertidal zone at each site. Volcanogenic massive sulfide deposits composed of pyrrhotite and (or) pyrite + chalcopyrite + sphalerite with subordinate galena, arsenopyrite, and cobaltite represent potent sources of Cu, Zn, Pb, As, Co, Cd, and Hg. The resistance to oxidation among the major sulfides increases in the order pyrrhotite ? sphalerite < chalcopyrite ? pyrite; thus, pyrrhotite-rich rocks are typically more oxidized than those dominated by pyrite. The pervasive alteration of pyrrhotite begins with rim replacement by marcasite followed by replacement of the core by sulfur, Fe sulfate, and Fe–Al sulfate. The oxi dation of chalcopyrite and pyrite involves an encroachment by colloform Fe oxyhydroxides at grain margins and along crosscutting cracks that gradually consumes the entire grain. The complete oxidation of sulfide-rich samples results in a porous aggregate of goethite, lepidocrocite and amorphous Fe-oxyhydroxide enclosing hydrothermal and sedimentary silicates. An inverse correlation between pH and metal concentrations is evident in water data from all three sites. Among all waters sampled, pore waters from Ellamar beach gravels have the lowest pH (∼3) and highest concentrations of base metals (to ∼25,000 μg/L), which result from oxidation of abundant sulfide-rich debris in the sediment. High levels of dissolved Hg (to 4100 ng/L) in the pore waters probably result from oxidation of sphalerite-rich rocks. The low-pH and high concentrations of dissolved Fe, Al, and SO₄ are conducive to precipitation of interstitial jarosite in the intertidal gravels. Although pore waters from the intertidal zone at the Threeman mine site have circumneutral pH values, small amounts of dissolved Fe²⁺ in the pore waters are oxidized during mixing with seawater, resulting in precipitation of Fe-oxyhydroxide flocs along the beach–seawater interface. At the Beatson site, surface waters funneled through the underground mine workings and discharged across the waste dumps have near-neutral pH (6.7–7.3) and a relatively small base-metal load; however, these streams probably play a role in the physical transport of metalliferous particulates into intertidal and offshore areas during storm events. Somewhat more acidic fluids, to pH 5.3, occur in stagnant seeps and small streams emerging from the Beatson waste dumps. Amorphous Fe precipitates in stagnant waters at Beatson have high Cu (5.2 wt%) and Zn (2.3 wt%) concentrations that probably reflect adsorption onto the extremely high surface area of colloidal particles. Conversely, crystalline precipitates composed of ferrihydrite and schwertmannite that formed in the active flow of small streams have lower metal contents, which are attributed to their smaller surface area and, therefore, fewer reactive sorption sites. Seeps containing precipitates with high metal contents may contribute contaminants to the marine environment during storm-induced periods of high runoff. Preliminary chemical data for mussels (Mytilus edulis) collected from Beatson, Ellamar, and Threeman indicate that bioaccumulation of base metals is occurring in the marine environment at all three sites.     

Fractionation of multiple sulfur isotopes during phototrophic oxidation of sulfide and elemental sulfur by a green sulfur bacterium

We present multiple sulfur isotope measurements of sulfur compounds associated with the oxidation of H₂S and S⁰ by the anoxygenic phototrophic S-oxidizing bacterium Chlorobium tepidum. Discrimination between ³⁴S and ³²S was +1.8 ± 0.5‰ during the oxidation of H₂S to S⁰, and −1.9 ± 0.8‰ during the oxidation of S⁰ to , consistent with previous studies. The accompanying Δ³³S and Δ³⁶S values of sulfide, elemental sulfur, and sulfate formed during these experiments were very small, less than 0.1‰ for Δ³³S and 0.9‰ for Δ³⁶S, supporting mass conservation principles. Examination of these isotope effects within a framework of the metabolic pathways for S oxidation suggests that the observed effects are due to the flow of sulfur through the metabolisms, rather than abiotic equilibrium isotope exchange alone, as previously suggested. The metabolic network comparison also indicates that these metabolisms work to express some isotope effects (between sulfide, polysulfides, and elemental sulfur in the periplasm) and suppress others (kinetic isotope effects related to pathways for oxidation of sulfide to sulfate via the same enzymes involved in sulfate reduction acting in reverse). Additionally, utilizing fractionation factors for phototrophic S oxidation calculated from our experiments and for other oxidation processes calculated from the literature (chemotrophic and inorganic S oxidation), we constructed a set of ecosystem-scale sulfur isotope box models to examine the isotopic consequences of including sulfide oxidation pathways in a model system. These models demonstrate how the small δ³⁴S effects associated with S oxidation combined with large δ³⁴S effects associated with sulfate reduction (by SRP) and sulfur disproportionation (by SDP) can produce large (and measurable) effects in the Δ³³S of sulfur reservoirs. Specifically, redistribution of material along the pathways for sulfide oxidation diminishes the net isotope effect of SRP and SDP, and can mask the isotopic signal for sulfur disproportionation if significant recycling of S intermediates occurs. We show that the different sulfide oxidation processes produce different isotopic fields for identical proportions of oxidation, and discuss the ecological implications of these results to interpreting minor S isotope patterns in modern systems and in the geologic record.     

Sequestration mechanisms and anthropogenic inputs of rhenium in sediments from Eastern Canada lakes

The concentrations of Re, as well as those of several other geochemical variables, were measured in dated sediment cores and in porewater samples from four lacustrine basins in Eastern Canada: one, perennially oxic, located 40 km from Québec City and three, seasonally anoxic, located within 25 km of non-ferrous metal smelters. The drainage basins of these lakes are uninhabited and have not been affected by human activity or wildfires. All of the depth profiles of dissolved Re indicate: higher Re concentrations in the water overlying the sediment than in the porewater; diffusion of Re across the sediment-water interface; a progressive decrease in porewater Re concentrations to reach minimum values of ∼0.5 pM within a 10-cm sediment depth interval. Modeling of these Re porewater profiles with a one-dimensional transport-reaction equation indicates that Re is removed from porewater within this depth interval. Based on thermodynamic predictions of Re speciation and of saturation states and on comparison of these predictions with sulfide porewater profiles, we infer that Re is removed from porewater by precipitation of rheniite (ReS_2(s)). The rate constant for the formation of ReS_2(s) in sediments is estimated from the modeling exercise to be 0.51 ± 0.64 × 10⁻²¹ mol cm⁻³ s⁻¹. Accumulation of sedimentary Re shows a strong authigenic component, as in anoxic marine sediments. Sharp increases in solid-phase Re during the last century are attributed to atmospheric deposition of anthropogenic Re deriving from coal burning and nearby smelter emissions.