The hydromagnesite playas of Atlin, British Columbia, Canada: A biogeochemical model for CO2 sequestration

Anthropogenic greenhouse gas emissions may be offset by sequestering carbon dioxide (CO₂) through the carbonation of magnesium silicate minerals to form magnesium carbonate minerals. The hydromagnesite [Mg₅(CO₃)₄(OH)₂·4H₂O] playas of Atlin, British Columbia, Canada provide a natural model to examine mineral carbonation on a watershed scale. At near surface conditions, CO₂ is biogeochemically sequestered by microorganisms that are involved in weathering of bedrock and precipitation of carbonate minerals. The purpose of this study was to characterize the weathering regime in a groundwater recharge zone and the depositional environments in the playas in the context of a biogeochemical model for CO₂ sequestration with emphasis on microbial processes that accelerate mineral carbonation.Regions with ultramafic bedrock, such as Atlin, represent the best potential sources of feedstocks for mineral carbonation. Elemental compositions of a soil profile show significant depletion of MgO and enrichment of SiO₂ in comparison to underlying ultramafic parent material. Polished serpentinite cubes were placed in the organic horizon of a coniferous forest soil in a groundwater recharge zone for three years. Upon retrieval, the cube surfaces, as seen using scanning electron microscopy, had been colonized by bacteria that were associated with surface pitting. Degradation of organic matter in the soil produced chelating agents and acids that contributed to the chemical weathering of the serpentinite and would be expected to have a similar effect on the magnesium-rich bedrock at Atlin. Stable carbon isotopes of groundwater from a well, situated near a wetland in the southeastern playa, indicate that  12% of the dissolved inorganic carbon has a modern origin from soil CO₂.The mineralogy and isotope geochemistry of the hydromagnesite playas suggest that there are three distinct depositional environments: (1) the wetland, characterized by biologically-aided precipitation of carbonate minerals from waters concentrated by evaporation, (2) isolated wetland sections that lead to the formation of consolidated aragonite sediments, and (3) the emerged grassland environment where evaporation produces mounds of hydromagnesite. Examination of sediments within the southeastern playa–wetland suggests that cyanobacteria, sulphate reducing bacteria, and diatoms aid in producing favourable geochemical conditions for precipitation of carbonate minerals.The Atlin site, as a biogeochemical model, has implications for creating carbon sinks that utilize passive microbial, geochemical and physical processes that aid in mineral carbonation of magnesium silicates. These processes could be exploited for the purposes of CO₂ sequestration by creating conditions similar to those of the Atlin site in environments, artificial or natural, where the precipitation of magnesium carbonates would be suitable. Given the vast quantities of Mg-rich bedrock that exist throughout the world, this study has significant implications for reducing atmospheric CO₂ concentrations and combating global climate change.     

Silicate and carbonate mineral weathering in soil profiles developed on Pleistocene glacial drift (Michigan, USA): Mass balances based on soil water geochemistry

Geochemistry of soil, soil water, and soil gas was characterized in representative soil profiles of three Michigan watersheds. Because of differences in source regions, parent materials in the Upper Peninsula of Michigan (the Tahquamenon watershed) contain only silicates, while those in the Lower Peninsula (the Cheboygan and the Huron watersheds) have significant mixtures of silicate and carbonate minerals. These differences in soil mineralogy and climate conditions permit us to examine controls on carbonate and silicate mineral weathering rates and to better define the importance of silicate versus carbonate dissolution in the early stage of soil-water cation acquisition.Soil waters of the Tahquamenon watershed are the most dilute; solutes reflect amphibole and plagioclase dissolution along with significant contributions from atmospheric precipitation sources. Soil waters in the Cheboygan and the Huron watersheds begin their evolution as relatively dilute solutions dominated by silicate weathering in shallow carbonate-free soil horizons. Here, silicate dissolution is rapid and reaction rates dominantly are controlled by mineral abundances. In the deeper soil horizons, silicate dissolution slows down and soil-water chemistry is dominated by calcite and dolomite weathering, where solutions reach equilibrium with carbonate minerals within the soil profile. Thus, carbonate weathering intensities are dominantly controlled by annual precipitation, temperature and soil pCO₂. Results of a conceptual model support these field observations, implying that dolomite and calcite are dissolving at a similar rate, and further dissolution of more soluble dolomite after calcite equilibrium produces higher dissolved inorganic carbon concentrations and a Mg²⁺/Ca²⁺ ratio of 0.4.Mass balance calculations show that overall, silicate minerals and atmospheric inputs generally contribute <10% of Ca²⁺ and Mg²⁺ in natural waters. Dolomite dissolution appears to be a major process, rivaling calcite dissolution as a control on divalent cation and inorganic carbon contents of soil waters. Furthermore, the fraction of Mg²⁺ derived from silicate mineral weathering is much smaller than most of the values previously estimated from riverine chemistry.     

Rates of Biotite Weathering,and Clay Mineral Transformation and Neoformation,Determined from Watershed Geochemical Mass-Balance Methods for the Coweeta Hydrologic Laboratory,Southern Blue Ridge Mountains,North Carolina,USA

Biotite is a common constituent of silicate bedrock. Its weathering releases plant nutrients and consumes atmospheric CO₂. Because of its stoichiometric relationship with its transformational weathering product and sensitivity to botanical activity, calculating biotite weathering rates using watershed mass-balance methods has proven challenging. At Coweeta Hydrologic Laboratory the coupling of biotite to its transformational weathering product is only valid if the stoichiometric relationship for the two phases is known; this relationship is unlikely layer-for-layer. Rates of biotite weathering and transformation of its secondary weathering product at the Coweeta Hydrological Laboratory are comparable with other Appalachian watersheds. The magnitude and sign of the difference between field- and laboratory-determined biotite weathering rates are similar to those of other silicate minerals. The influence of major-cation proportions in biomass on the rates of biotite weathering and transformational weathering product is greatest for watersheds with high biomass aggradation rates. The watershed with the lowest bedrock reactivity and highest flushing rate yielded the highest gibbsite formation rate of ~500 mol ha^?1 year^?1 and lowest kaolin-group mineral formation rates of 4–78 mol ha^?1 year^?1. The kaolin-group mineral formation rate increases as bedrock reactivity increases and flushing rate decreases to a maximum of ~300 mol ha^?1 year^?1, with a similar minimum gibbsite formation rate. The relative differences in bedrock reactivity and flux of water through Coweeta Hydrological Laboratory watersheds studied appear to be invariant over geologic timescales.     

Reconciling the elemental and Sr isotope composition of Himalayan weathering fluxes: insights from the carbonate geochemistry of stream waters

Determining the relative proportions of silicate vs. carbonate weathering in the Himalaya is important for understanding atmospheric CO₂ consumption rates and the temporal evolution of seawater Sr. However, recent studies have shown that major element mass-balance equations attribute less CO₂ consumption to silicate weathering than methods utilizing Ca/Sr and ⁸⁷Sr/⁸⁶Sr mixing equations. To investigate this problem, we compiled literature data providing elemental and ⁸⁷Sr/⁸⁶Sr analyses for stream waters and bedrock from tributary watersheds throughout the Himalaya Mountains. In addition, carbonate system parameters (P_CO2, mineral saturation states) were evaluated for a selected suite of stream waters. The apparent discrepancy between the dominant weathering source of dissolved major elements vs. Sr can be reconciled in terms of carbonate mineral equilibria. Himalayan streams are predominantly Ca²⁺-Mg²⁺-HCO₃⁻ waters derived from calcite and dolomite dissolution, and mass-balance calculations demonstrate that carbonate weathering contributes ∼87% and ∼76% of the dissolved Ca²⁺ and Sr²⁺, respectively. However, calculated Ca/Sr ratios for the carbonate weathering flux are much lower than values observed in carbonate bedrock, suggesting that these divalent cations do not behave conservatively during stream mixing over large temperature and P_CO2 gradients in the Himalaya.The state of calcite and dolomite saturation was evaluated across these gradients, and the data show that upon descending through the Himalaya, ∼50% of the streams evaluated become highly supersaturated with respect to calcite as waters warm and degas CO₂. Stream water Ca/Mg and Ca/Sr ratios decrease as the degree of supersaturation with respect to calcite increases, and Mg²⁺, Ca²⁺, and HCO₃⁻ mass balances support interpretations of preferential Ca²⁺ removal by calcite precipitation. On the basis of patterns of saturation state and P_CO2 changes, calcite precipitation was estimated to remove up to ∼70% of the Ca²⁺ originally derived from carbonate weathering. Accounting for the nonconservative behavior of Ca²⁺ during riverine transport brings the Ca/Sr and ⁸⁷Sr/⁸⁶Sr composition of the carbonate weathering flux into agreement with the composition of carbonate bedrock, thereby permitting consistency between elemental and Sr isotope approaches to partitioning stream water solute sources. These results resolve the dissolved Sr²⁺ budget and suggest that the conventional application of two-component Ca/Sr and ⁸⁷Sr/⁸⁶Sr mixing equations has overestimated silicate-derived Sr²⁺ and HCO₃⁻ fluxes from the Himalaya. In addition, these findings demonstrate that integrating stream water carbonate mineral equilibria, divalent cation compositional trends, and Sr isotope inventories provides a powerful approach for examining weathering fluxes.     

Effects of temperature on silicate weathering: Solute fluxes and chemical weathering in a temperate rain forest watershed,Jamieson Creek,British Columbia

Chemical weathering of silicate minerals has long been known as a sink for atmospheric CO₂, and feedbacks between weathering and climate are believed to affect global climate. While warmer temperatures are believed to increase rates of weathering, weathering in cool climates can be accelerated by increased mineral exposure due to mechanical weathering by ice. In this study, chemical weathering of silicate minerals is investigated in a small temperate watershed. The Jamieson Creek watershed is covered by mature coniferous forest and receives high annual precipitation (4000 mm), mostly in the form of rainfall, and is underlain by quartz diorite bedrock and glacial till. Analysis of pore water concentration gradients indicates that weathering in hydraulically unsaturated ablation till is dominated by dissolution of plagioclase and hornblende. However, a watershed scale solute mass balance indicates high relative fluxes of K and Ca, indicating preferential leaching of these solutes possibly from the relatively unweathered lodgement till. Weathering rates for plagioclase and hornblende calculated from a watershed scale solute mass balance are similar in magnitude to rates determined using pore water concentration gradients.When compared to the Rio Icacos basin in Puerto Rico, a pristine tropical watershed with similar annual precipitation and bedrock, but with dissimilar regolith properties, fluxes of weathering products in stream discharge from the warmer site are 1.8 to 16.2-fold higher, respectively, and regolith profile-averaged plagioclase weathering rates are 3.8 to 9.0-fold higher. This suggests that the Arrhenius effect, which predicts a 3.5- to 9-fold increase in the dissolution rate of plagioclase as temperature is increased from 3.4° to 22 °C, may explain the greater weathering fluxes and rates at the Rio Icacos site. However, more modest differences in K and Ca fluxes between the two sites are attributed to accelerated leaching of those solutes from glacial till at Jamieson Creek. Our findings suggest that under conditions of high rainfall and favorable topography, weathering rates of silicate minerals in warm tropical systems will tend to be higher than in cool temperate systems, even if the temperate system is has been perturbed by an episode of glaciation that deposits regolith high in fresh mineral surface area.     

Hydrologic controls on radiogenic Sr in meltwater from an alpine glacier system: Athabasca Glacier,Canada

Filtered subglacial meltwater samples were collected daily during the onset of melt (May) and peak melt (July) over the 2011 melt season at the Athabasca Glacier (Alberta, Canada) and analyzed for strontium-87/strontium-86 (⁸⁷Sr/⁸⁶Sr) isotopic composition to infer the evolution of subglacial weathering processes. Both the underlying bedrock composition and subglacial water–rock interaction time are the primary influences on meltwater ⁸⁷Sr/⁸⁶Sr. The Athabasca Glacier is situated atop Middle Cambrian carbonate bedrock that also contains silicate minerals. The length of time that subglacial meltwater interacts with the underlying bedrock and substrate is a predominant determining factor in solute concentration. Over the course of the melt season, increasing trends in Ca/K and Ca/Mg correspond to overall decreasing trends in ⁸⁷Sr/⁸⁶Sr, which indicate a shift in weathering processes from the presence of silicate weathering to primarily carbonate weathering.Early in the melt season, rates of carbonate dissolution slow as meltwater approaches saturation with respect to calcite and dolomite, corresponding to an increase in silicate weathering that includes Sr-rich silicate minerals, and an increase in meltwater ⁸⁷Sr/⁸⁶Sr. However, carbonate minerals are preferentially weathered in unsaturated waters. During the warmest part of a melt season the discharged meltwater is under saturated, causing an increase in carbonate weathering and a decrease in the radiogenic Sr signal. Likewise, larger fraction contributions of meltwater from glacial ice corresponds to lower ⁸⁷Sr/⁸⁶Sr values, as the meltwater has lower water–rock interaction times in the subglacial system. These results indicate that although weathering of Sr-containing silicate minerals occurs in carbonate dominated glaciated terrains, the continual contribution of new meltwater permits the carbonate weathering signal to dominate.     

Solute generation and CO2 consumption during silicate weathering under subtropical,humid climate,northern Okinawa Island,Japan

The chemical characteristics of freshwaters draining the silicate rocks in the northern part of Okinawa Island were studied to understand solute generation processes, and to determine rates of chemical weathering and CO₂ consumption. It was observed that the water chemistry is highly influenced by marine aerosols, contributing more than 60% of total solute. Significant positive correlations observed for chloride versus dissolved silica and chloride versus bicarbonate suggest a strong influence of evapotranspiration on the seasonality of solute concentration. It was also found that chemical weathering has been highly advanced in which the dominant kaolinite minerals are being gibbsitized. Carbonic acid was found to be the major chemical weathering agent, releasing greater than 80% of weathering-derived dissolved cations and silica while the remaining portion was attributed to weathering by sulfuric acid generated via oxidation of pyrite contained in the rocks. The flux of basic cations, weathering-derived silica and CO₂ consumption were relatively high due to favourable climatic condition, topography and high rate of mechanical erosion. Silicate weathering rates for basic cations were estimated to be 6.7–9.7 ton km^− 2 y^− 1. Carbon dioxide consumed by silicate weathering was 334–471 kmol km^− 2 y^− 1 which was slightly higher than that consumed by carbonate weathering. In general, divalent cations (Mg and Ca) and bicarbonate alkalinity derived from carbonate dissolution were higher than those from silicate weathering. As a consequence, the evolution of chemical species in the freshwaters of northern area of Okinawa Island to a large extent could be explained by mixing of two components, characterized by waters with Na⁺ and Cl⁻ as predominant species and waters enriched with Ca²⁺ and HCO₃⁻.     

Chemical weathering of carbonates and silicates in the Han River basin,South Korea

A detailed investigation of the fluvial geochemistry of the Han River system allows to estimate the rates of chemical weathering and the consumption of CO₂. The Han River drains approximately 26,000 km² and is the largest river system in South Korea in terms of both water discharge and total river length. It consists of two major tributaries: the North Han River (NHR) and the South Han River (SHR). Distinct differences in basin lithology (silicate vs. carbonate) between the NHR and SHR provide a good natural laboratory in which to examine weathering processes and the influence of basin geology on water quality. The concentrations of major elements and the Sr isotopic compositions were obtained from 58 samples collected in both summer and winter along the Han River system in both 2000 and 2006. The concentrations of dissolved loads differed considerably between the NHR and SHR; compared with the SHR, the NHR had much lower total dissolved solids (TDS), Sr, and major ion concentrations but a higher Si concentration and ⁸⁷Sr/⁸⁶Sr ratio. A forward model showed that the dissolved loads in the NHR came primarily from silicate weathering (55 ± 11%), with a relatively small portion from carbonates (30 ± 14%), whereas the main contribution to the dissolved loads in the SHR was carbonate weathering (82 ± 3%), with only 11 ± 4% from silicates. These results are consistent with the different lithologies of the two drainage basins: silicate rocks in the NHR versus carbonate rocks in the SHR. Sulfuric acid derived from sulfide dissolution in coal-containing sedimentary strata has played an important role in carbonate weathering in the SHR basin, unlike in the NHR basin. The silicate weathering rate (SWR) was similar between the NHR and SHR basins, but the rate of CO₂ consumption in the SHR basin was lower than in the NHR basin due to an important role of sulfuric acid derived from pyrite oxidation.     

北江河水溶解无机碳同位素的季节变化

在有碳酸盐岩分布的河流流域, 河水地球化学主要反映的是风化速率较高的碳酸盐矿物风化的信息, 而硅酸盐矿物风化的信息往往被掩盖掉.北江流域碳酸盐岩和硅酸岩分布广泛, 为追踪其中的硅酸盐矿物风化的信息, 分析了北江河水中溶解无机碳同位素的时空变化.河水样品按4个季节自北江的上游到下游采集6个样点, 分析结果显示, 除上游武江的采样点同位素值季节变化不大外, 中下游采样点的同位素值有明显季节变化, 主要表现在6月份的δ13C_DIC显著变轻(-16‰~-19‰).在详细剖析矿物风化过程对碳同位素的影响后, 指出除了显著的碳酸盐矿物风化过程外, 北江流域在夏季还存在明显的硅酸盐矿物风化过程, 大大提高了流域的碳汇作用.      

Seasonally chemical weathering and CO<Subscript>2</Subscript> consumption flux of Lake Qinghai river system in the northeastern Tibetan Plateau

The major cation and anion compositions of waters from the Lake Qinghai river system (LQRS) in the northeastern Tibetan Plateau were measured. The waters were collected seasonally from five main rivers during pre-monsoon (late May), monsoon (late July), and post-monsoon (middle October). The LQRS waters are all very alkaline and have high concentrations of TDS (total dissolved solids) compared to rivers draining the Himalayas and the southeastern Tibetan Plateau. Seasonal variations in the water chemistry show that, except the Daotang River, the TDS concentration is high in October and low in July in the LQRS waters. The forward models were used to quantify the input of three main rivers (Buha River, Shaliu River, and Hargai River) from rain, halite, carbonates, and silicates. The results suggest that (1) atmospheric input is the first important source for the waters of the Buha River and the Shaliu River, contributing 36–57% of the total dissolved cations, (2) carbonate weathering input and atmospheric input have equal contribution to the Hargai River water, (3) carbonate weathering has higher contribution to these rivers than silicate weathering, and (4) halite is also important source for the Buha River. The Daotang River water is dominated by halite input owing to its underlying old lacustrine sediments. The water compositions of the Heima River are controlled by carbonate weathering and rainfall input in monsoon season, and groundwater input may be important in pre-monsoon and post-monsoon seasons. After being corrected the atmospheric input, average CO₂ drawdown via silicate weathering in the LQRS is 35 × 10³ mol/km² per year, with highest in monsoon season, lower than Himalayas and periphery of Tibetan Plateau rivers but higher than some rivers draining shields.     

River water quality in weathered limestone: A case study in upper Mahanadi basin, India

Stromatolitic limestone and calcareous shale belonging to Chattisgarh Supergroup of Proterozoic age dominate the upper part of the Mahanadi river basin. X-ray diffractogram (XRD) of limestone rocks show presence of a significant amount of calcite, dolomite and ankerite. Shales of various colours contain calcite and dolomite. It is observed that congruent dissolution of carbonate minerals in the Charmuria pure limestone has given rise to a typical karst topography. On the other hand, limestones are also seen to support red and black soil profiles. This indicates that the limestone bedrock undergoes a parallel incongruent weathering, which leaves a residue of decomposed rock. The XRD analyses reveal that the limestone soils thus formed contain an assemblage of quartz, clays and Fe-oxides. It is likely that the silicate component trapped during deposition of the stromatolitic limestone weathers incongruently resulting in diverse soil profiles. Carbonate and silicate mineral weathering schemes have been worked out to explain the soil formation, fixation of Al in clay minerals, and Fe in goethite. The water quality parameters such as Ca, Mg and HCO₃ in the river water suggest under saturation with respect to calcite and dolomite. The mineral stability diagrams indicate that kaolinite and Ca-smectite are stable in the river water environment, hence they occur in suspended sediments and soils. The dominant influence of carbonate weathering on the water quality is observed even in the downstream part of the river outside the limestone terrain.     

Spatial variations in chemical weathering and CO2 consumption in Nepalese High Himalayan catchments during the monsoon season

The major ion chemistry of the Marsyandi basin and six of its tributaries in the Nepalese Himalaya have been investigated during the monsoon months of 2002. Weekly water samples taken at 10 river monitoring stations in the Annapurna watershed over the course of 4 months provide chemical weathering data for the region at an unprecedented temporal and spatial resolution. The river chemistry of all but one basin is heavily dominated by carbonate weathering which, compared to silicate weathering, contributes 80 to 97% of the total solute load. This prevalence is due to a combination of (a) intrinsically faster dissolution kinetics of carbonates, (b) relatively high runoff and (c) glacial meltwater and low temperatures at high altitudes resulting in enhanced carbonate solubilities. Monitoring stations with headwaters in the Tethyan Sedimentary Series (TSS) are particularly carbonate-rich and slightly supersaturated with respect to calcite through half of the monsoon season. Silicate weathering in the TSS is driven largely by sulfuric acid and therefore does not contribute significantly to the drawdown of atmospheric CO₂. With respect to the tributaries in the Greater Himalayan Sequence (GHS), carbonate weathering is practically as predominant as for the TSS, in spite of the largely felsic lithology of the GHS. Relative to the TSS, the primary proton source in the GHS has shifted, with at least 80% of the protons derived from carbonic acid. Averaged over the whole field area, the CO₂ fluxes, based on silicate-derived Ca and Mg, are considerably lower than the global average. Assuming that this study area is representative of the entire range, we conclude that in situ weathering of the High Himalayas does not represent a significant sink of atmospheric carbon dioxide, despite the presence of a watershed south of the GHS that is characterized by a four times higher CO₂ consumption rate than the global average. Silicate weathering rates of all basins appear to be climate controlled, displaying a tight correlation with runoff and temperature. Given the extremely low chemical weathering under transport-limited conditions in high-altitude crystalline terrains outside of the monsoon season, this would result in virtually no chemical exhumation for 2/3 of the year in such a cold and arid climate, north of the rain shadow cast by the High Himalayas.     

Atmospheric CO2 sink: Silicate weathering or carbonate weathering?

It is widely accepted that chemical weathering of Ca–silicate rocks could potentially control long-term climate change by providing feedback interaction with atmospheric CO₂ drawdown by means of precipitation of carbonate, and that in contrast weathering of carbonate rocks has not an equivalent impact because all of the CO₂ consumed in the weathering process is returned to the atmosphere by the comparatively rapid precipitation of carbonates in the oceans. Here, it is shown that the rapid kinetics of carbonate dissolution and the importance of small amounts of carbonate minerals in controlling the dissolved inorganic C (DIC) of silicate watersheds, coupled with aquatic photosynthetic uptake of the weathering-related DIC and burial of some of the resulting organic C, suggest that the atmospheric CO₂ sink from carbonate weathering may previously have been underestimated by a factor of about 3, amounting to 0.477 Pg C/a. This indicates that the contribution of silicate weathering to the atmospheric CO₂ sink may be only 6%, while the other 94% is by carbonate weathering. Therefore, the atmospheric CO₂ sink by carbonate weathering might be significant in controlling both the short-term and long-term climate changes. This questions the traditional point of view that only chemical weathering of Ca–silicate rocks potentially controls long-term climate change.     

Geochemistry of the headwaters of the Yangtze River, Tongtian He and Jinsha Jiang: Silicate weathering and CO2 consumption

Water and sediment samples were collected from the headwaters of the Yangtze River, Tongtian He and Jinsha Jiang (upstream of the Yangtze River which flows on the eastern Qinghai-Tibet Plateau). A detailed geochemical study of the river system was carried out to determine: (i) temporal and spatial variations of the major ions and their implications; (ii) contribution of carbonate, silicate and evaporite to the river dissolved load and (iii) CO₂ consumption via silicate weathering. Results show that cations derived from evaporite dissolution account for 44.7–82.8% of the total cations in the headwaters of the Yangtze River and increasing from SE to NW of the drainage basin. The contribution from silicate weathering gradually increases from the headwaters due to exposure of intrusive rocks and volcanic rocks in the Jinsha Jiang suture belt. Proportion of cations derived from silicate weathering to the total cations in river waters reaches a maximum at Panzhihua City, which is consistent with the abundant exposure of Cenozoic granitoids and Precambrian high-grade metamorphic rocks around Panzhihua. The Jinsha Jiang basin has higher silicate weathering rates but lower carbonate weathering rates than the middle and lower reaches of the Yangtze River. The calculated enrichment factors of potentially harmful metals in the river sediments are within the range of 0.33–2.59, indicative of level 1 or 2 contamination. The highest enrichment factor for Co, Cr and V is found in Panzhihua City, indicating that it has been influenced by anthropogenic sources.     

Atmospheric CO2 consumption by chemical weathering in North America

CO₂ consumption by chemical weathering is an integral part of the boundless carbon cycle, whose spatial patterns and controlling factors on continental scale are still not fully understood. A dataset of 338 river catchments throughout North America was used to empirically identify predictors of bicarbonate fluxes by chemical weathering and interpret the underlying controlling factors. Detailed analysis of major ion ratios enables distinction of the contributions of silicate and carbonate weathering and thus quantifying CO₂ consumption. Extrapolation of the identified empirical model equations to North America allows the analysis of the spatial patterns of the CO₂ consumption by chemical weathering.Runoff, lithology and land cover were identified as the major predictors of the riverine bicarbonate fluxes and the associated CO₂ consumption. Other influence factors, e.g. temperature, could not be established in the models. Of the distinguished land cover classes, artificial surfaces, dominated by urban areas, increase bicarbonate fluxes most, followed by shrubs, grasslands, managed lands, and forests. The extrapolation results in an average specific bicarbonate flux of 0.3 Mmol km⁻² a⁻¹ by chemical weathering in North America, of which 64% originates from atmospheric CO₂, and 36% from carbonate mineral dissolution. Chemical weathering in North America thus consumes 50 Mt atmospheric CO₂-C per year. About half of that originates from 10% of the area of North America.The estimated strength of individual predictors differs from previous studies. This highlights the need for a globally representative set of regionally calibrated models of CO₂ consumption by chemical weathering, which apply very detailed spatial data to resolve the heterogeneity of earth surface processes.     

The role of sulfur in chemical weathering and atmospheric CO2 fluxes: Evidence from major ions, δCDIC, and δSSO4 in rivers of the Canadian Cordillera

Water samples from the Fraser, Skeena and Nass River basins of the Canadian Cordillera were analyzed for dissolved major element concentrations (HCO₃⁻, SO₄²⁻, Cl⁻, Ca²⁺, Mg²⁺, K⁺, Na⁺), δ¹³C of dissolved inorganic carbon (δ¹³C_DIC), and δ³⁴S of dissolved sulfate (δ³⁴S_SO4) to quantify chemical weathering rates and exchanges of CO₂ between the atmosphere, hydrosphere, and lithosphere. Weathering rates of silicates and carbonates were determined from major element mass balance. Combining the major element mass balance with δ³⁴S_SO4 (−8.9 to 14.1‰_CDT) indicates sulfide oxidation (sulfuric acid production) and subsequent weathering of carbonate and to a lesser degree silicate minerals are important processes in the study area. We determine that on average, 81% of the riverine sulfate can be attributed to sulfide oxidation in the Cordilleran rivers, and that 25% of the total weathering cation flux can be attributed to carbonate and silicate dissolution by sulfuric acid. This result is validated by δ¹³C_DIC values (−9.8 to −3.7‰ _VPDB) which represents a mixture of DIC produced by the following weathering pathways: (i) carbonate dissolution by carbonic acid (−8.25‰) > (ii) silicate dissolution by carbonic acid (−17‰) ≈ (iii) carbonate dissolution by sulfuric acid derived from the oxidation of sulfides (coupled sulfide-carbonate weathering) (+0.5‰).δ³⁴S_SO4 is negatively correlated with δ¹³C_DIC in the Cordilleran rivers, which further supports the hypothesis that sulfuric acid produced by sulfide oxidation is primarily neutralized by carbonates, and that sulfide-carbonate weathering impacts the δ¹³C_DIC of rivers. The negative correlation between δ³⁴S_SO4 and δ¹³C_DIC is not observed in the Ottawa and St. Lawrence River basins. This suggests other factors such as landscape age (governed by tectonic uplift) and bedrock geology are important controls on regional sulfide oxidation rates, and therefore also on the magnitude of sulfide-carbonate weathering—i.e., it is more significant in tectonically active areas.Calculated DIC fluxes due to Ca and Mg silicate weathering by carbonic acid (38.3 × 10³ mol C · km⁻² · yr⁻¹) are similar in magnitude to DIC fluxes due to sulfide-carbonate weathering (18.5 × 10³ mol C · km⁻² · yr⁻¹). While Ca and Mg silicate weathering facilitates a transfer of atmospheric CO₂ to carbonate rocks, sulfide-carbonate weathering can liberate CO₂ from carbonate rocks to the atmosphere when sulfide oxidation exceeds sulfide deposition. This implies that in the Canadian Cordillera, sulfide-carbonate weathering can offset up to 48% of the current CO₂ drawdown by silicate weathering in the region.     

The short term climatic sensitivity of carbonate and silicate weathering fluxes: Insight from seasonal variations in river chemistry

Large seasonal variations in the dissolved load of the headwater tributaries of the Marsyandi river (Nepal Himalaya) for major cations and ⁸⁷Sr/⁸⁶Sr ratios are interpreted to result from a greater dissolution of carbonate relative to silicate at high runoff. There is up to a 0.003 decrease in strontium isotope ratios and a factor of 3 reduction in the Si(OH)₄/Ca ratio during the monsoon. These variations, in small rivers sampling uniform lithologies, result from a different response of carbonate and silicate mineral dissolution to climatic forcing. Similar trends are observed in compiled literature data, from both Indian and Nepalese Himalayan rivers. Carbonate weathering is more sensitive to monsoonal runoff because of its faster dissolution kinetics. Silicate weathering increases relative to carbonate during the dry season, and may be more predominant in groundwater with longer water-rock interaction times. Despite this kinetic effect, silicate weathering fluxes are dominated by the monsoon flux, when between 50% and 70% of total annual silicate weathering flux occurs.     

Chemical weathering processes in the Yalong River draining the eastern Tibetan Plateau,China

To better understand chemical weathering and controlling processes in the Yalong River of the eastern Tibetan Plateau, this study presents major ion concentrations and stable isotopes of the dissolved loads. The isotopic compositions (δ¹³C-DIC, δ³⁴S and δ¹⁸O-SO₄) of the dissolved loads are very useful to quantify solute sources and define the carbon budget related with chemical weathering in riverine systems. The isotopic composition of sulphate demonstrates that most of the sulphate is derived from sulphide oxidation, particularly in the upper reach of the Yalong River. The correlations between δ¹³C-DIC, water chemistry and isotopes of sulphate, suggest that the carbon dynamics are mainly affected by carbonate weathering by sulphuric acid and equilibration processes. Approximately 13% of the dissolved inorganic carbon in the Yalong River originates from carbonate weathering by strong acid. The CO₂ consumption rates are estimated to be 2.8 × 10⁵ mol/km²/yr and 0.9 × 10⁵ mol/km²/yr via carbonate and silicate weathering in the Yalong River, respectively. In this study, the influence of sulphide oxidation and metamorphic CO₂ on the carbon budget is estimated for the Yalong River draining the eastern Tibetan Plateau.     

Geochemical alterations in surface waters of Govind Ballabh Pant Sagar,Northern Coalfield,India

Major ions showed high concentrations, ionic strength and chemical activity in the surface waters of Govind Ballabh Pant Sagar reservoir. Various geochemical ratios showed the dominance of silicate over carbonate weathering and major ions such as Na⁺ + K⁺ account for about 52 % of the cation budget. The high Na⁺ and K⁺ showed sedimentation of rock/coal particles consisting of highly weathered silicate minerals contributed by the discharge of mine water, fly ash mixing during transportation, etc. Further, Ca²⁺ + Mg²⁺/Na⁺ + K⁺ ratio was <1 (0.92) indicating the occurrence of silicate weathering in the reservoir catchment. The comparative assessment showed that the proportion of Ca²⁺ + Mg²⁺/Na⁺ + K⁺ tends to be lower along the coal mining belts compared to non-coal mining regions in the world. The Ca²⁺/SO₄ ^2? ratio <1 revealed not only H₂CO₃ but H₂SO₄ also acting as a source of protons for rock weathering. The cause underlying these differences can be related directly to geological substrate and anthropogenic activities.