高陡岩质斜坡结构面的无人机贴近采集与粗糙度分析

为了研究采样尺寸、采样间距对结构面粗糙度评价结果的影响,本文以川藏线昌都至林芝段的色曲特大桥左岸高陡斜坡结构面为研究对象。使用无人机贴近摄影测量技术获取斜坡的三维空间坐标和表面纹理数据;室内实现斜坡的三维重建以及点云化处理;从点云模型上人为提取出37个结构面信息,使用MATLAB进行结构面规则网格化重建;基于Z_2S法描述结构面粗糙度表征值在不同尺寸、不同间距下的变化规律。结果表明:结构面粗糙度的尺寸效应、间距效应明显,采样间距的增大使有效采样尺寸值减小。因此,在进行粗糙度研究时应选取较小的采样间距,采样尺寸应大于等于“真”有效采样尺寸值。此外,本文是无人机贴近摄影测量技术应用在结构面数据采集领域的一个案例,是进行结构面粗糙度特征研究的有益补充。     

基于颗粒识别分析系统的碎屑流堆积物颗粒识别和统计方法研究

碎屑流堆积物颗粒识别和统计是碎屑流灾害的研究重点。文章基于图像处理孔隙（颗粒）及裂隙图像识别与分析系统（PCAS）,以贵州纳雍普洒村崩塌-碎屑流为例,结合纳雍崩塌堆积物粒径实测结果,通过阐释识别过程中阈值、孔喉封闭半径、最小孔隙面积的参数意义,研究PCAS软件在碎屑流颗粒识别与统计中的应用,并提出了颗粒识别时这些参数的选取方法。分析结果表明:（1）PCAS能自动准确地识别碎屑流堆积物颗粒与孔隙,相比人工计数更精细,所识别堆积物各区小颗粒比重较大,0～2 m颗粒粒径各区占比都在50%以上;（2）当阈值为170（像素）时能获得精细的二值图像,颗粒与孔隙得到了准确地区分;（3）不同参数取值下获得堆积物颗粒粒径分布结果不同,碎屑流堆积物颗粒识别宜采用较大的孔喉封闭半径和较小孔隙面积,当二者比值为3/30（像素）时能更好地反应颗粒粒径分布情况;（4）PCAS具有较高的可行性,统计结果显示,各粒径含量变化趋势与人工统计相近,两种统计方法各粒径占比、分布规律基本吻合,说明利用PCAS可以实现对崩塌碎屑流颗粒粒径分布的高效便捷分析。     

Scandium in rocks,minerals and sediments and its relations to iron and aluminium

Scandium, aluminium and iron contents of a considerable number of rocks, minerals and sediments for various origin are given. They have been obtained by instrumental neutron activation analysis.The concentrations of these elements in rocks and minerals are very variable. However the Fe/Sc and Al/Sc ratios for the finer particles of sediments from different origins are fairly constant. At a spec. surf. of 100 m²/g is found 0.2 to 0.3 × 10⁴ for Fe/Sc and 0.60 to 0.95 × 10⁴ for Al/Sc (mol).In the coarser sediments there is a considerable influence of particle size. Consequently when Sc-contents of sediments are compared for classification purposes, their spec. surf. or granulometric composition should be determined as well.     

微炭屑的几种统计方法比较及其对人类活动的指示意义

微炭屑是研究火的历史和过去人类活动、重建古生态的一项重要指标。它一般指长轴小于120μm、黑色不透明的炭化颗粒。常用点接触法（11刻点和202刻点）、图像识别法、颗粒计数法和分粒级法进行微炭屑统计。本文利用不同方法求得的微炭屑面积浓度或颗粒浓度曲线显著相关,相关系数在0.6以上（p<0.05）,表明这几种方法的微炭屑统计结果具有相似的变化趋势,尤其是两种点接触法与图像识别法的统计结果更加相近,相关系数分别为0.79与0.88;  颗粒计数法与点接触法、图像识别法的相关系数是0.75和0.74。分粒级法与点接触法、图像识别法和颗粒计数法的相关性随着粒级的变化而不同。两种点接触法的微炭屑统计结果的相关系数高达0.93,反映了这两种方法所得微炭屑统计结果具有几乎相同的变化趋势。202刻点接触法由于与其他统计法的相关性都比较高,统计视域多且鉴定统计速度快,是进行微炭屑统计的最佳方法。微炭屑浓度高的时段出现在繁荣的文化期,可能指示着强烈的人类活动。     

The statistics of counting clasts in rudites: a review, with examples from the upper Palaeogene of southern California, USA

The relative proportions of gravel sized particles of different lithology in rudaceous sedimentary rocks are generally determined in the field by clast counting. Clast counts are usually carried out qualitatively in order to assess sedimentary provenance. However, a review of the statistical aspects of clast counting suggests that this technique also can be applied quantitatively, and to investigate a variety of other objectives during basin analysis. Geographical and stratigraphical changes in the relative proportions of clasts can be quantified statistically and used to characterize sediment dispersal patterns in space and time, respectively. Statistical comparisons between clast assemblages can be used as a tool to match up rock units. This approach may help to constrain tectonic or suspect-terrane models, or to document sediment recycling. Both counting and sampling errors contribute to the total probable error of a clast count. Sampling error results from the uneven distribution of clasts in outcrop, perhaps caused by selective sorting. Counting error arises from a count of some number less than the total number of clasts in the population. Sampling and counting errors can be minimized by counting in closely spaced subsets, and by counting a total of at least 400 clasts, respectively. Thus, a useful procedure is to count four closely spaced subsets of 100 each, and combine the results for a total of 400. Point counting should not be used because differences in particle size produce biased results. A better method is to count all clasts above some minimum size within a specified area of outcrop. Analysis of upper Palaeogene non-marine conglomerates composing part of the Sespe Formation in California, using confidence intervals, hypothesis testing, analysis of variance, ratio analysis and varietal studies, demonstrates that useful statistics can be derived by counting clasts.     

河流泥沙粒径计法分析成果改正方法的实验研究

根据国家行业标准《河流泥沙颗粒分析规程》规定”粒径计分析成果，受群体沉降和扩散影响，应根据标样实验分析确定的方法进行校正“的要求，采集全国性河流１６个测站的悬沙样品，对粒径为０．０６２－０．５ｍｍ分析范围的粒径计法，以单颗沉降分析法为标准进行对比实验，据以确定粒径计法分析成果的改正方法，能充分满足颗分规程的质量检验要求。     

地质标准物质粒度测量与表征的现代方法

地质标准物质是地质材料分析的计量标准,在分析质量监控、仪器校准和分析方法评价中发挥着重要作用。地质标准物质大多为粉体材料,而粒度是粉体材料的一项重要特性指标。长期以来,地质标准物质的粒度一直采用过筛法检测;近年来在超细标准物质研制中引入了以激光粒度仪为代表的现代粒度分析方法,并以直观的粒度分布图和简洁的特征粒度来表达分析结果,大大提升了粉体地质标准物质粒度特性的测量及表征水平。在此工作基础上,测量了正在广泛使用的典型地质标准物质的粒度分布,获得了前所未知的粒度分布信息,为这些标准物质的正确使用和取样不确定度评价提供了有益的资料。简单地介绍了检测粉体材料颗粒特性的现代方法,讨论了地质分析与粒度分析在概念上的差异,并就今后地质标准物质乃至地质分析样品的粒度检测与表征方法提出了建议。     

Field Survey and Research Approaches at Apine Treelines

A tree line, as the altitudinal or latitudinal limit of erect trees, is considered as a sensitive ecological indicator of climate change, and becomes one of the hot issues in the studies of global change ecology. During the last decade, rapid progress has been made in tree line studies. However, field survey and research methods may vary significantly among tree line literatures, limiting the evaluation of mountainous forest response and feedback to climate change at regional or global scale. Herein, we reviewed the research progress regarding the field survey and research methods on tree lines, evaluated the advantages and disadvantages of each method, and pointed out the current research frontiers. Field survey and research methods in tree line literatures mainly include: Repeat landscape photography, remote sensing image analysis, land line transect method, circular sampling plot, rectangular or square sampling plot, spatial point pattern analysis, tree line dynamic model, controlled experiment, and transplant experiment. Repeat landscape photography and remote sensing image analysis can provide an intuitive reference for treeline dyanmics, but some uncertainties remain. Compared with selective sampling approach (e.g., line transect method, circular sampling plot and square small plot), sample-total method (rectangular large plots including the whole tree line ecotone, i.e., encompassing the current timberline and the tree line) provides more robust results regarding tree line structure and shifts. Spatial point pattern analysis has been used to establish the linkage between the ecological patterns and processes of the tree line ecotone. Tree line dynamic models can be used to reveal temporal patterns of position and structure of tree line ecotones and their driving mechanisms. Controlled or transplant experiment has advantages in exploring the critical drivers of tree line dynamics. In future studies, sample-total method and its protocol are recommended when exploring variations in structure and position of tree lines; regular monitoring of fixed large tree line plot is worth carrying out; controlled or transplant experiment can be set up at diverse tree lines across a regional scale; researchers should attempt to develop new tree line dynamic models with good transplantation capability.     

膨润土与石英的粒度分析方法优选

采用淘析法、激光粒度分析法、渗透过滤法、显微镜法对膨润土及石英的粒度进行测量比较分析。实验结果表明：4种方法得到的粒度由大到小依次为淘析法、激光粒度分析法、显微镜法、渗透过滤法;由于凝聚的影响,淘析法与激光粒度分析法测试结果粒度偏大;渗透法分析结果与显微镜法结果较为接近;膨润土在水中崩解的粒度比石英要小,但采用沉降法分离提纯,膨润土比石英更易于团聚,因此在湿法提纯研究中,有必要添加分散剂。     

岩石颗粒度测量方法的研究及其应用

本文介绍了三种不同岩石颗粒度的测量方法,点计法,线计法,带计法及两种不同计算程序。颗粒度测量结果研究表明三种不同测量方法及两种不同计算程序之间存在着差別,其中结合野外的实例,其应用结果带计法为最好,线段长度百分比要比颗粒的频率百分比计算程序要好,前者能较客观地反映颗粒的实际搬运时水介质动力条件和沉积物的沉积环境。     

阿根廷米纳毕戈塔地区水系沉积物采样粒度试验研究

中国地质调查局与阿根廷地质矿产调查局合作在阿根廷西北部米纳毕戈塔地区进行1︰25万水系沉积物测量,该区属于干旱-半干旱高寒山区,为突出找矿效果,消除或减少风积物干扰,需要确定适合于该区的水系沉积物采样粒度。为此,在该区选择一个有已知矿床的1︰5万图幅进行采样粒度试验,分别选择10~60目、-60目、60~80目、-80目4个粒度级进行粒度试验;根据我国区域地球化学勘查规范,每个粒度分析39种元素。结果表明,大部分元素在4种粒度水系沉积物中的分布形态基本一致,都能够较好地反映出区内已知矿床,说明采用的采样方法可以有效地避免风成砂干扰;金、银、铜、锡等成矿元素在4种粒度中的分布略有差异,10~60目的金、铜和锡异常对已知矿体的反应更清晰准确。因此,本区水系沉积物地球化学测量的最佳采样粒度是10~60目。根据本次试验结果,中-阿地调局在本区联合开展1︰25万水系沉积物地球化学测量时采用了10~60目水系沉积物作为采样介质,取得了很好的效果。这是本区第一次进行水系沉积粒度试验,对本区将来的地球化学调查和研究具有指导意义。     

动态图像法应用于海滩沉积物粒度粒形测试及其与筛析法的比较

筛析法是海滩沉积物粒度分析较经典和常用的方法。随着科学技术的发展,利用动态图像法分析沉积物粒度逐渐得到推广。本文利用动态图形法和筛析法对海南岛5个海滩剖面20组沉积物样品进行粒度粒形测试,并将两种方法所测得的粒度进行比较。测试分析结果显示,该方法的测试结果重复性好,精度高;通过与筛析法的对比显示,动态图像法与筛析法的测试结果非常接近,粒度级配曲线基本一致,各个粒度参数值很接近且相关性非常好（R2>0.94）;由动态图像法得出的粒形参数可以看出,粒径相当的不同海滩沉积物粒形参数有很大差别,同一海滩不同部位的球形度和宽长比变化很大,对称度和凹凸度变化稍小。研究表明,动态图像法与筛析法之间的粒度分析差异主要来自于两者测量原理的不同和天然海滩砂颗粒形状的不规则;动态图像法解决了不规则沉积物粒度的测量。因此,动态图像法可以替代筛析法来测量沉积物粒度,应用前景广阔。     

不同粒径级砂土渗透特性试验研究

渗透性是砂土的重要工程性质之一,影响砂土渗透性的因素有很多,比如土体密实程度、土颗粒自身特性、流体性质等,其中孔隙率与颗粒粒径是两个重要影响因素。而以往基于混合粒径的天然砂土的研究很难分别对这两个因素进行独立的研究。基于此,首先开展了单一粒径级砂土的常水头渗透试验,分别研究了同一粒径级砂土渗透系数随孔隙率的变化和同一孔隙率下不同粒径级砂土渗透系数随均值粒径的变化规律。试验结果显示,渗透系数随着孔隙率的增加而线性增加、随均值粒径二次方的增加而线性增加,其中均值粒径的影响较大,其变化能导致渗透系数量级上的差异。在此基础上,开展了多粒径混合砂土的渗透试验,讨论了曲率系数、不均匀系数等级配参数对渗透性的影响,从而将单一粒径级的研究成果推广到天然砂土,最终拟合出渗透系数与相关影响因素的经验公式,以便工程实践参考使用。     

桩承式路堤承载特性的颗粒流模拟

现有的土拱效应计算方法中,由于采用的计算模型不同,计算结果差异很大。文中克服传统连续介质力学模型的宏观连续性假设,采用二维颗粒流程序（PFC）建立基于模型试验的细观数值分析模型,对桩承式路堤中土体接触力、应力分布、主应力方向、竖向位移进行分析,并比较计算和实测结果,研究土拱效应的荷载传递机制。同时,对不同桩帽、桩间距、填土高度、颗粒大小、摩擦角的情况进行PFC方法的参数敏感性分析。研究结果表明,桩承式路堤桩顶处局部范围可按弹性核考虑;土拱的分布型式受桩帽型式、桩净距、格栅的影响;实际土拱作用的影响范围主要集中在路堤底面以上约1倍桩净距的区域;土拱内部的竖向应力和水平应力均随深度非线性改变,桩土应力比随着荷载水平、土体内摩擦角、颗粒大小的增大而增加。     

结构性软土的黏滞系数

黏滞系数是表征土的蠕变和流动特性的重要指标。对黄石、漳州、青岛地区结构性软土进行电子显微镜扫描、颗粒分析、X衍射试验和化学分析试验,测试结果表明,软土的粒度成分、矿物成分、物理化学性质、结构类型对黏滞系数影响较大。软土蠕变过程中,结构单元体发生定向排列或产生滑动,其相对运动使结合水的黏滞性反映出来,进而引起黏滞系数的变化。进行直接剪切蠕变试验,并通过陈氏法处理蠕变试验数据。试验结果表明,黏滞系数随剪应力的增加达到峰值,固结压力越大,峰值体现越明显,峰值对应的剪应力也越大,这主要是微观结构随剪应力增大逐渐破损所引起的。固结压力增大,结合水膜厚度变薄,土颗粒间连接力增强,黏滞系数也随之增大。用不同固结压力下黏滞系数峰值对应的剪应力代替临界抗剪强度,提出了一个新的求取长期强度的方法,并通过试验数据验证了方法的正确性。该研究有助于进一步认清蠕变机制,对修正或建立较为符合实际的本构模型有一定意义。     

Latent Compositional Factors in The Llobregat River Basin (Spain) Hydrogeochemistry

The study of hydrogeochemical data sets frequently calls for statistical dimension reducing techniques. It is well known that hydrochemical parameters are compositions and, for this type of data, the direct application of classical statistical methods based on the correlation matrix yield spurious results. But new results on compositional data analysis have identified the sampling space, the simplex, with an Euclidean space, a fact that allows us to define a simplicial factor analysis strategy, thus overcoming the problem. For illustration, we use samples from the Llobregat River and its tributaries (NE Spain). Three unobservable or latent factorial components are extracted, which are identified with pristine waters, potash-mining influence and urban sewage influence. These three factorial components or compositional factors are plotted in a factorial ternary diagram, which reflects the relative influence of each one of these factors on each observation.     

基于PFC3D的黄土三轴试验细观参数敏感性分析

从细观角度出发,研究各细观参数对黄土三轴试验宏观力学响应的影响,基于三维离散元PFC3D软件及理论,结合室内三轴试验结果确定数值模拟基本细观参数取值范围,在50 kPa、100 kPa、150 kPa、200 kPa围压下对三轴试样进行颗粒流模拟,通过改变各细观参数值对黄土数值试样宏观力学行为影响程度及正交试验设计的方式,开展黄土三轴数值模拟过程中摩擦系数、孔隙率、颗粒刚度比k_n/k_s、颗粒粒径分布的敏感性分析,建立土体细观参数与宏观力学的关系式。结果表明:不同围压下数值试样峰值强度和剩余强度均与摩擦系数正相关,与颗粒刚度比、孔隙率负相关,而颗粒粒径分布的变化对其影响均小于2%。低围压下(50 kPa),孔隙率对数值试样峰值抗剪强度和剩余强度影响最大,颗粒刚度比次之,高围压下(200 kPa),摩擦系数对数值试样强度的影响比颗粒刚度比更为显著;对数值试样的初始线弹性模量和应变软化特性影响最大的细观参数为孔隙率,刚度比次之,颗粒粒径分布最小,200 kPa围压下正交试验分析结果与数值分析结果一致。通过改变细观参数取值范围的方式系统地分析了其对黄土三轴试验宏观力学性能的影响,为今后离散元软件用于黄土室内试验研究提供了参考。     

A comparison of grain‐size analysis methods for sand‐dominated fluvial sediments

Grain‐size distribution is a fundamental tool for interpreting sedimentary units within depositional systems. The techniques assessed in this study are commonly used to determine grain‐size distributions for sand‐dominated sediments. However, the degree of consistency and differences in interpretation when using a combination of grain‐size methods have not yet been assessed systematically for sand‐dominated fluvial sediments. Results obtained from laser diffraction, X‐ray attenuation and scanning electron microscopy grain‐size analysis techniques were compared with those obtained from the traditional sieve/hydrometer method. Scanning electron microscopy was shown to provide an inaccurate quantitative analysis of grain‐size distributions because of difficulties in obtaining representative samples for examination. The X‐ray attenuation method is unsuitable for sand‐dominated sediments because of its upper size range of only 300 μm. The consistently strong correlation between the laser diffraction results and the sieve/hydrometer results shows that these methods are comparable for sand‐dominated fluvial sediments. Provided that sample preparation is consistent, the latter two methods can be used together within a study of such sediments while maintaining a high degree of accuracy. These results indicate that data for sand‐dominated fluvial sediments gained from the long‐established sieve/hydrometer method can be compared with confidence to those obtained by modern studies using laser diffraction techniques.     

不同前处理方法对北方红色风化壳粒度测试影响的初步探讨

选取中国北方岩溶区红色风化壳为研究对象,首先用浓度为30%的H2O2去除样品中的有机质,然后用4种不同的前处理方法分别进行处理,其中方法A未用盐酸溶液处理,方法B、C、D均用盐酸溶液分解可能存在的残余碳酸盐和次生游离氧化物,以消除其对机械颗粒可能存在的胶结作用,此外方法C的HCl在煮沸的条件下反应,方法 B的HCl在常温条件下进行,方法D则更改了超声波振荡的时间。本文样品采用Beckman公司生产的LS13320 型激光衍射粒度测试仪进行测量。结果表明,样品前处理方法对中国北方红色风化壳粒度分析结果有影响,不同的前处理方法使样品的粒度值最大产生5%左右的变化;从实验的稳定性上考虑,4种方法的平行试验标准偏差最大达到6.78%。在现有的认识条件下,粒度测量结果的可重复性是最基本的要求。本文认为方法C的测量效果要好于其他方法。      

Improved Petrological Modal Analyses from X-ray Powder Diffraction Data by use of the Rietveld Method I. Selected Igneous, Volcanic, and Metamorphic Rocks

Mineral modes have been determined for specimens of eight rocktypes from CuK X-ray powder diffraction data using the Rietveldmethod. The samples include two granites, a granodiorite, adamellite,gabbro, basalt, trachyte, and two granulite-facies metamorphicrocks. Up to eight individual mineral components have been measuredin each sample (no glassy phases were observed), with a detectionlimit of {small tilde}1 wt.%, depending on the mineral assemblage.Marked variations in grain size (i.e., granite vs. trachyte)provide no difficulties for the X-ray method. The X-ray resultscompare very favourably with (1) optical modes determined forthe medium–coarse-grained samples by point counting, (2)normative calculations obtained using locally enhanced catanormand mesonorm software, and (3) corresponding Rietveld modesdetermined, for two samples, from neutron powder data. Wheredifferences occur, these are discussed in relation to the limitationsof each of the methods. The improved accuracy of the X-ray method is due primarily tothe incorporation of the full diffraction profile in the Rietveldanalysis calculations, and the elimination of preferred orientationby collecting the data from samples packed in glass capillaries(i.e., Debye–Scherrer mode). The good agreement of theX-ray and neutron modes shows that the usual problems encounteredwith microabsorption, extinction, and sampling are of littleconcern in these rocks. The results highlight one of the majoradvantages provided by Rietveld modal analysis over the moretraditional ‘reference intensity’ X-ray methods,namely, that the crystal chemistry (and thus the calibrationconstants) of the individual phases can be adjusted dynamicallyduring each individual analysis. This not only provides moreaccurate phase abundances, but also gives important supplementaryinformation about the mineralogy of the major components.