Tectonic indentation in the central Alboran Sea (westernmost Mediterranean)

The Alboran Sea constitutes a Neogene–Quaternary basin of the Betic–Rif Cordillera, which has been deformed since the Late Miocene during the collision between the Eurasian and African plates in the westernmost Mediterranean. NNE–SSW sinistral and WNW–ESE dextral conjugate fault sets forming a 75° angle surround a rigid basement spur of the African plate, and are the origin of most of the shallow seismicity of the central Alboran Sea. Northward, the faults decrease their transcurrent slip, becoming normal close to the tip point, while NNW–SSE normal and sparse ENE–WSW reverse to transcurrent faults are developed. The uplifting of the Alboran Ridge ENE–WSW antiform above a detachment level was favoured by the crustal layering. Despite the recent anticlockwise rotation of the Eurasian–African convergence trend in the westernmost Mediterranean, these recent deformations—consistent with indenter tectonics characterised by a N164°E trend of maximum compression—entail the highest seismic hazard of the Alboran Sea.     

Shallow frontal deformation related to active continental subduction: structure and recent stresses in the westernmost Betic Cordillera

The westernmost Betic Cordillera front is located along the arcuate alpine belt formed by the interaction of the Eurasian‐African plate boundary and the Alboran continental domain in between. Although classical geological data suggest that the western Cordillera front is inactive, recent GPS data show a westward–north‐westward motion of up to 3.4 mm a^?1 with respect to the foreland. In addition, the increasing thickness of Guadalquivir sedimentary infill towards the Cordillera, and the rectilinear character of the front formed by soft sediments, suggest that the Cordillera is still active. Large ENE–WSW‐oriented open folds detected in the field, seismic reflection profiles and new audiomagnetotellurics data are consistent with active deformation. Fracture analysis in Quaternary deposits evidences recent NW–SE horizontal compression. The GPS motion and maximum stress orientation may be due to north‐westward tectonic collision of the westernmost Betic Cordillera, accommodated at depth by active continental subduction of the Iberian lithosphere.     

Structural analysis of the Lombard thrust sheet and adjacent areas in the Helena salient,southwest Montana,USA

The Helena salient is a prominent craton–convex curve in the Cordillera thrust belt of Montana, USA. The Lombard thrust sheet is the primary sheet in the salient. Structural analysis of fold trends, cleavage attitudes, and movement on minor faults is used to better understand both the geometry of the Lombard thrust and the kinematic development of the salient.Early W–E to WNW–ENE shortening directions in the Lombard sheet are indicated by fold trends in the center of the thrust sheet. The same narrow range of shortening directions is inferred from kinematic analysis of movement on minor faults and the orientations of unrotated cleavage planes along the southern lateral ramp boundary of the salient. As the salient developed, the amount and direction of shortening were locally modified as listric detachment faults rotated some tight folds to the NW, and as right-lateral simple shear, caused by lock-up and folding of the Jefferson Canyon fault above the lateral ramp, rotated other folds northeastward. Where the lateral ramp and frontal-oblique ramp intersect, folds were rotated back to the NW. Our interpretation of dominant W–E to WNW–ESE shortening in the Lombard sheet, later altered by local rotations, supports a model of salient formation by primary parallel transport modified by interactions with a lateral ramp.     

Wrench structural deformation in Ras Al Hilal-Al Athrun area, NE Libya: a new contribution in Northern Al Jabal Al Akhdar Belt

Al Jabal Al Akhdar is a NE/SW- to ENE/WSW-trending mobile part in Northern Cyrenaica province and is considered a large sedimentary belt in northeast Libya. Ras Al Hilal-Al Athrun area is situated in the northern part of this belt and is covered by Upper Cretaceous–Tertiary sedimentary successions with small outcrops of Quaternary deposits. Unmappable and very restricted thin layers of Palaeocene rocks are also encountered, but still under debate whether they are formed in situ or represent allochthonous remnants of Palaeocene age. The Upper Cretaceous rocks form low-lying to unmappable exposures and occupy the core of a major WSW-plunging anticline. To the west, south, and southeast, they are flanked by high-relief Eocene, Oligocene, and Lower Miocene rocks. Detailed structural analyses indicated structural inversion during Late Cretaceous–Miocene times in response to a right lateral compressional shear. The structural pattern is themed by the development of an E–W major shear zone that confines inside a system of wrench tectonics proceeded elsewhere by transpression. The deformation within this system revealed three phases of consistent ductile and brittle structures (D₁, D₂, and D₃) conformable with three main tectonic stages during Late Cretaceous, Eocene, and Oligocene–Early Miocene times. Quaternary deposits, however, showed at a local scale some of brittle structures accommodated with such deformation and thus reflect the continuity of wrenching post-the Miocene. D₁ deformation is manifested, in Late Cretaceous, via pure wrenching to convergent wrenching and formation of common E- to ENE-plunging folds. These folds are minor, tight, overturned, upright, and recumbent. They are accompanied with WNW–ESE to E–W dextral and N–S sinistral strike-slip faults, reverse to thrust faults and pop-up or flower structures. D₂ deformation initiated at the end of Lutetian (Middle Eocene) by wrenching and elsewhere transpression then enhanced by the development of minor ENE–WSW to E–W asymmetric, close, and, rarely, recumbent folds as well as rejuvenation of the Late Cretaceous strike-slip faults and formation of minor NNW–SSE normal faults. At the end of Eocene, D₂ led to localization of the movement within E–W major shear zone, formation of the early stage of the WSW-plunging Ras Al Hilal major anticline, preservation of the contemporaneity (at a major scale) between the synthetic WNW–ESE to E–W and ENE–WSW strike-slip faults and antithetic N–S strike-slip faults, and continuity of the NW–SE normal faults. D₃ deformation is continued, during the Oligocene-Early Miocene, with the appearance of a spectacular feature of the major anticline and reactivation along the E–W shear zone and the preexisting faults. Estimating stress directions assumed an acted principal horizontal stress from the NNW (N33°W) direction.     

Structural Mapping of the Bentong‐Raub Suture Zone Using PALSAR Remote Sensing Data,Peninsular Malaysia: Implications for Sediment‐hosted/Orogenic Gold Mineral Systems Exploration

The Bentong‐Raub Suture Zone (BRSZ) of Peninsular Malaysia is one of the major structural zones in Sundaland, Southeast Asia. It forms the boundary between the Gondwana‐derived Sibumasu terrane in the west and Sukhothai Arc in the east. The BRSZ is genetically related to the sediment‐hosted/orogenic gold deposits associated with the major lineaments in the Central Gold Belt of Peninsular Malaysia. In this investigation, the Phased Array type L‐band Synthetic Aperture Radar (PALSAR) satellite remote sensing data were used to map major geological structures in Peninsular Malaysia and provide detailed characterization of lineaments and curvilinear structures in the BRSZ, as well as their implication for sediment‐hosted/orogenic gold exploration in tropical environments. Major structural lineaments such as the Bentong‐Raub Suture Zone (BRSZ) and Lebir Fault Zone, ductile deformation related to crustal shortening, brittle disjunctive structures (faults and fractures) and collisional mountain range (Main Range granites) were detected and mapped at regional scale using PALSAR ScanSAR data. The major geological structure directions of the BRSZ were N–S, NNE–SSW, NE–SW and NW–SE, which derived from directional filtering analysis to PALSAR fine and polarimetric data. The pervasive array of N–S faults in the Central Gold Belt and surrounding terrain is mainly linked to the N–S trending of the Suture Zone. N–S striking lineaments are often cut by younger NE–SW and NW–SE‐trending lineaments. Gold mineralized trend lineaments are associated with the intersection of N–S, NE–SW, NNW–SSE and ESE–WNW faults and curvilinear features in shearing and alteration zones. Compressional tectonic structures such as the NW–SE trending thrust, ENE–WSW oriented faults in mylonite and phyllite, recumbent folds and asymmetric anticlines in argillite are high potential zones for gold prospecting in the Central Gold Belt. Three generations of folding events in Peninsular Malaysia have been recognized from remote sensing structural interpretation. Consequently, PALSAR satellite remote sensing data is a useful tool for mapping major geological structural features and detailed structural analysis of fault systems and deformation areas with high potential for sediment‐hosted/orogenic gold deposits and polymetallic vein‐type mineralization along margins of Precambrian blocks, especially for inaccessible regions in tropical environments.     

Direct 40Ar/39Ar dating of Late Ordovician and Silurian brittle faulting in the southwestern Norwegian Caledonides

Structural data as well as U–Pb zircon and ⁴⁰Ar/³⁹Ar biotite and muscovite ages were collected from the Rolvsnes granodiorite in western Norway. The granodiorite intruded at c. 466 Ma, cooled quickly and escaped later viscous deformation. Brittle top‐to‐the‐NNW thrust faults (Set I) and WNW–ESE striking dextral strike‐slip faults (Set II) formed in a NNW–SSE transpressional regime. ⁴⁰Ar/³⁹Ar dating of synkinematic mica from both sets reveals a c. 450 Ma (Late Ordovician) age of faulting, which constrains early‐Caledonian brittle deformation. Set I and II faults are overprinted by a set of lower‐grade, variably oriented chlorite‐ and epidote‐coated faults (Set III) constraining WNW–ESE shortening. A lamprophyric dyke oriented compatibly with this stress field intruded at c. 435 Ma (Silurian), indicating that Set III formed at the onset of the Scandian Baltica–Laurentia collision. The preservation of Caledonian brittle structures indicates that the Rolvsnes granodiorite occupied a high tectonic level throughout the Caledonian orogeny.     

Joints,faults and palaeostress evolution in the Campo de Dalias (Betic Cordilleras,southeastern Spain)

The Campo de Dal??as, located between the central and eastern Betic Cordilleras, shows an evolution determined by the overprinting of two main stress fields since Pliocene times. The first of these develops hybrid and tensional joint sets up to Pleistocene (100 000 yr) and is characterized by NNW–SSE horizontal trend of compression and an ENE–WSW horizontal extension. The second stress field has prolate to triaxial extensional ellipsoids, also with ENE–WSW horizontal extension, and continues to be active today. The most recent stresses produce the reactivation of previous joints as faults whose trends are comprised mainly from N120°E to N170°E and have a normal and transtensional regime, with dextral or sinistral components. The palaeostress evolution of this region is similar to that undergone by other basins of the Eastern Betic Cordilleras, although the Pliocene–Pleistocene transcurrent deformations in the Campo de Dal??as only develop joints and not strike-slip faults.     

Kinematics and strain partitioning in the southeast Hellenides (Greece)

New kinematic and structural data from the tectonic windows of eastern Crete and the Dodecanese Islands combined with strain and quartz fabric analysis have enabled us to determine a detailed structural evolution of the region and to present a plate tectonic scenario for the southeast Hellenides. During the Early Mesozoic, the southeastern part of Apulia was separated from North Africa and the adjacent microplates by WNW‐trending rift zones and NE‐trending transfer faults. Displacement along the transfer faults has locally reoriented these rift zones into an ENE–WSW direction. Finite strain and quartz fabric asymmetry data indicate that in Late Cenozoic time, NNW‐directed nappe movements caused a nearly coaxial deformation along the ENE–WSW trending rift segments and non coaxial top‐to‐the‐southeast shearing along the WNW‐trending rift segments, as well as along the pre‐existing NE‐trending transfer faults. Tectonic style along the margin varies in response to the obliquity of the principal shortening direction with respect to the margin. These variations could be due to the pre‐convergence geometry of the southern margin of Eurasia and to local strain partitioning effects. Furthermore, a tectonic model is presented in which syncompressional uplift and vertical buoyancy of the subducted crustal slice caused the rapid exhumation of metamorphic units in the south Hellenides. Copyright © 2003 John Wiley & Sons, Ltd.     

Alpine tectonics and diapiric structures in the Pre-Betic zone of southeast Spain

The Pre-Betic is the most northerly of the Alpine zones forming the Betic Cordilleras of southern Spain. It consists of strongly folded and faulted Mesozoic and Tertiary rocks, the oldest of which are ferruginous and gypsiferous Triassic mudstones, followed by a predominantly carbonate facies of Cretaceous, Palaeogene and Miocene age. Although this sequence is interrupted by a number of minor unconformities, the major structures were formed during the middle or late Miocene. The highly incompetent Triassic rocks are the most strongly deformed, and form diapiric intrusions discordant to regional structural trends in the younger rocks. The latter are essentially of two facies: massive competent limestones which are deformed by relatively simple folds of large wavelength, and highly incompetent marl-limestone interbeds with complex disharmonic folds and crush belts. Faults include low-angle and high-angle thrusts, gravity slides and wrench faults. The regional tectonic strike is ENE to NE, but the diapiric intrusions mostly follow WNW and N directions. These intrusions have pushed the younger rocks aside, the result being polyphase structures of several trends.Less intense post-Miocene tectonics are mostly associated with continued diapirism and have resulted in the folding and tilting of the late Miocene to Quaternary elastic sediments.     

Cenozoic tectonic evolution of the central Wassuk Range,western Nevada,USA

The central Wassuk Range is ideally located to investigate the interplay of Basin and Range extension and Walker Lane dextral deformation along the western Nevada margin of the Basin and Range province. To elucidate the Cenozoic evolution of the range, the author conducted geologic mapping, structural data collection and analysis, geochemical analysis of igneous lithologies, and geochronology. This research delineates a three-stage deformational history for the range. A pulse of ENE–WSW-directed extension at high strain rates (～8.7 mm/yr) was initiated immediately after the eruption of ～15 Ma andesite flows; strain was accommodated by high-angle, closely spaced (1–2 km), east-dipping normal faults which rotated and remained active to low angles as extension continued. A post-12 Ma period of extension at low strain rates produced a second generation of normal faults and two prominent dextral strike–slip faults which strike NW, subparallel to the dextral faults of the Walker Lane at this latitude. A new pulse of ongoing extension began at ～4 Ma and has been accomodated primarily by the east-dipping range-bounding normal fault system. The increase in the rate of fault displacement has resulted in impressive topographic relief on the east flank of the range, and kinematic indicators support a shift in extension direction from ENE–WSW during the highest rates of Miocene extension to WNW–ESE today. The total extension accommodated across the central Wassuk Range since the middle Miocene is >200%, with only a brief period of dextral fault activity during the late Miocene. Data presented here suggest a local geologic evolution intimately connected to regional tectonics, from intra-arc extension in the middle Miocene, to late Miocene dextral deformation associated with the northward growth of the San Andreas Fault, to a Pliocene pulse of extension and magmatism likely influenced by both the northward passage of the Mendocino triple junction and possible delamination of the southern Sierra Nevada crustal root.     

Superposed deformation and inherited structures in an ancient dilational step-over zone: Post-mortem of the Rengali Province,India

In the eastern Indian shield, a dextral strike-slip system juxtaposed the Archaean Singhbhum Province against the Proterozoic Eastern Ghats Belt at ∼490–470 Ma. Two WNW–ESE trending strands of the strike-slip system enclose a multiply deformed (D₁ to D₃) intervening domain called the Rengali Province, with D₃ representing dextral shearing. In a granulite lens within the province, an early fabric (S_gr) was deformed by an amphibolite facies D₁–D₂ deformation continuum in the late Archaean time, forming cylindrical folds. In the surrounding quartzofeldspathic gneisses, quartzites and mica schists of the province, superimposition of syn-D₃ shortening on D₁-D₂ folds generated complex non-cylindrical geometries; the granulites escaped D₃ strain. Microstructures in the province-bounding shear zones confirm that D₃ deformation was associated with mylonitization, dynamic recrystallization and greenschist facies metamorphism. In the quartzites, syn-D₃ folds can be correlated with rotation of D₁–D₂ structures through the shortening zone of bounding dextral shears. Since the province-bounding shears form a step-over zone, the structural complexity within the Rengali Province arises from superposition of syn-D₃ shortening structures on initially asympathetically oriented inherited cylindrical D₁-D₂ folds. Hydrous fluid channeling causing greenschist facies metamorphism and quartz vein emplacement accompanied D₃ as the step-over zone was dilational in nature.     

Lithologic and structural mapping of the Abiete–Toko gold district in southern Cameroon,using Landsat 7 ETM+/SRTM

The geology of the Abiete–Toko gold district in South Cameroon is investigated using a combination of Landsat 7 ETM+/SRTM image processing techniques, conventional geologic field mapping and geostatistical analysis. The satellite images were treated using Principal Component Analysis and Sobel filters to separate the background noise from lithotectonic structures which were matched with field data. The results show that this area has been affected by a polyphase deformation represented by S₁ foliation, S_c1 schistosity, L₁ lineation, S₂ foliation, F₂ folds, and F₃ shear zones and faults. A detailed analysis of all the structures led to the identification of two major networks of dextral and sinistral shear zones oriented WNW–ESE and NE–SW, respectively. These results may serve in mining prospection, especially in the search for tectonically controlled primary mineralization and so may significantly guide the exploration of primary gold mineralization in the Abiete–Toko area subjected to years of artisanal gold mining.     

Three-dimensional compressional deformations in the Zailiski Alatau mountains,Kazakstan

Abstract

The classical model of faulting predicts that slip planes occur in two conjugate sets. Theoretically, more sets can be contemporarily active if pre-existing structures are reactivated in a three-dimensional strain field. Four to six sets of faults have been active in the Holocene in the Zailiski Alatau mountain range, Kazakstan. Faults strike with the highest frequency ENE and ESE and show mostly left-lateral reverse and right-lateral reverse motions, respectively. These faults have a bimodal distribution of dips, forming four sets arranged in orthorhombic symmetry. Locally, NNW- to NNE- striking vertical faults have also been active in the Holocene and show right-lateral strike-slip and left-lateral strike-slip motions, respectively. All these fault sets accommodated the general three-dimensional deformation, given by N-S-directed horizontal shortening, vertical extension, and E-W-directed horizontal extension. Field evidence also shows that the reverse motions, even if with a minor strike-slip component, occurred on high-angle planes with inclination of 65°-85°. ENE- and ESE-striking faults reactivated older fracture zones, whereas the other sets are newly formed. Comparison of these field results with the structures obtained from published analogue models shows a strong similarity of fault geometry and kinematics.     

济阳盆地中生代构造特征与油气

济阳盆地中生代构造主要包括：印支期ＮＷ向压性构造（褶皱及逆断层）、消亡的ＮＷ向负反转半地垒及半地堑、燕山期ＥＮＥ向压性构造（褶皱或逆断层）、ＳＮ向地垒。印支期ＮＷ向压性构造是华北板块同扬子板块的聚敛运动的产物,而ＮＷ向负反转地垒和地堑、ＥＮＥ向压性构造及ＳＮ向地垒导源于郯庐断裂的左旋剪切作用,新生代郯庐断裂右旋剪切运动导致上述构造消亡并成为隐伏构造。中生代隐伏构造为济阳盆地深层勘探提供了潜山圈闭（     

中国活动构造与地震活动

文中研究了中国活动构造与地震活动的关系 ,包括活动断裂、活动褶皱、活动盆地和活动块体与地震活动的关系。全部 8级、绝大部分 7～ 7.9级地震均发生在活动块体边界活动构造带内 ;但对内部有次级活动构造的块体而言 ,少数 7～ 7.9级地震和部分 6～ 6 .9级地震也可能发生在块体内部的活动构造带上。大地震与活动断裂、活动褶皱和活动盆地的关系十分紧密 ,70多次 7级以上地震的同震破裂带及其位移参数与活动构造完全一致 ,7～ 8级地震均发生在活动断裂、活动褶皱和活动盆地带内 ,仅个别地震由于发生在高原和高山区 ,情况不明 ,6～ 6 .9级地震则大约有 5 %～ 15 %发生在活动构造带外或者情况不明。由于中国各断块区应力环境的差别 ,各区活动构造变形和地震发震构造类型也有所不同 ,文中对不同构造区走滑型 ,逆断裂褶皱型和正断裂拉张型活动构造和地震发震构造模型作了讨论。     

Evolution of the stress and strain fields in the Eastern Cordillera,Colombia

This work integrates stress data from Global Positioning System measurements and earthquake focal mechanism solutions, with new borehole breakout and natural fracture system data to better understand the complex interactions between the major tectonic plates in northwestern South America and to examine how the stress regime in the Eastern Cordillera and the Llanos foothills in Colombia has evolved through time. The dataset was used to generate an integrated stress map of the northern Andes and to propose a model for stress evolution in the Eastern Cordillera. In the Cordillera, the primary present-day maximum principal stress direction is WNW–ESE to NW–SE, and is in the direction of maximum shortening in the mountain range. There is also a secondary maximum principal stress direction that is E–W to ENE–WSW, which is associated with the northeastward “escape” of the North Andean block, relative to stable South America. In the Cupiagua hydrocarbon field, located in the Llanos foothills, the dominant NNE–SSW fractures are produced by the Panama arc–North Andes collision and range-normal compression. However, less well developed asymmetrical fractures oriented E–W to WSW–ENE and NNW–SSE are also present, and may be related to pre-folding stresses in the foreland basin of the Central Cordillera or to present-day shear associated with the northeastward “escape” of the north Andean block. Our study results suggest that an important driver for orogenic deformation and changes in the stress field at obliquely convergent subduction zone boundaries is the arrival of thickened crust, such as island arcs and aseismic ridges, at the trench.     

Structural controls on the evolution of the Kutai Basin,East Kalimantan

The Kutai Basin formed in the middle Eocene as a result of extension linked to the opening of the Makassar Straits and Philippine Sea. Seismic profiles across the northern margin of the Kutai Basin show inverted middle Eocene half-graben oriented NNE–SSW and N–S. Field observations, geophysical data and computer modelling elucidate the evolution of one such inversion fold. NW–SE and NE–SW trending fractures and vein sets in the Cretaceous basement have been reactivated during the Tertiary. Offset of middle Eocene carbonate horizons and rapid syn-tectonic thickening of Upper Oligocene sediments on seismic sections indicate Late Oligocene extension on NW–SE trending en-echelon extensional faults. Early middle Miocene (N7–N8) inversion was concentrated on east-facing half-graben and asymmetric inversion anticlines are found on both northern and southern margins of the basin. Slicken-fibre measurements indicate a shortening direction oriented 290°–310°. NE–SW faults were reactivated with a dominantly dextral transpressional sense of displacement. Faults oriented NW–SE were reactivated with both sinistral and dextral senses of movement, leading to the offset of fold axes above basement faults. The presence of dominantly WNW vergent thrusts indicates likely compression from the ESE. Initial extension during the middle Eocene was accommodated on NNE–SSW, N–S and NE–SW trending faults. Renewed extension on NW–SE trending faults during the late Oligocene occurred under a different kinematic regime, indicating a rotation of the extension direction by between 45° and 90°. Miocene collisions with the margins of northern and eastern Sundaland triggered the punctuated inversion of the basin. Inversion was concentrated in the weak continental crust underlying both the Kutai Basin and various Tertiary basins in Sulawesi whereas the stronger oceanic crust, or attenuated continental crust, underlying the Makassar Straits, acted as a passive conduit for compressional stresses.     

La mine médiévale d'argent du Pontet,une fente alpine contemporaine de la surrection des massifs cristallins ?

This study of the Pontet mine aimed at updating the understanding of ore-structural geology setting and, in terms of archaeology, at pointing out how the geometry of structures influenced the medieval workings and the shape of the galleries. The mineralisation and the WNW–ESE dextral normal faults controlling its emplacement are assigned to the Eocene by analogy with the neighbouring La Gardette structure. This confirms the Late Eocene to Oligocene age classically proposed for Phase 1 and places it in the Eocene. The Prégentil-type P1 folds described by Lameyre (1958) are here attributed to Phase 1, which raises the question as to whether the contemporaneous tectonic uplift of the crystalline basement should also be assigned to Phase 1 rather than to Phase 2. To cite this article: J.-L. Feybesse et al., C. R. Geoscience 336 (2004).     

Paleostress Reconstruction from Striated Fault Data Sets in the Kirthar Fold Belt,Southern Pakistan

The Kirthar fold belt (KFB) is one of the N-S-trending portions of the thrust belts of western Pakistan. In the study area (some 150 km north of Karachi), the KFB consists of large-scale, open NNW-SSE anticlines that affect the outcropping Kirthar and Nari formations. From an analysis of more than 200 minor strike-slip and reverse faults from 14 different data stations, two main σ₁ directions were identified, ENE and ESE. The ESE stress is interpreted as the regional, primary stress field, and the ENE direction as a deflection of the former caused by the presence and activity of NNW-trending macrostructures (folds and strike-slip faults).     

Structural mapping based on potential field and remote sensing data,South Rewa Gondwana Basin,India

Intracratonic South Rewa Gondwana Basin occupies the northern part of NW–SE trending Son–Mahanadi rift basin of India. The new gravity data acquired over the northern part of the basin depicts WNW–ESE and ENE–WSW anomaly trends in the southern and northern part of the study area respectively. 3D inversion of residual gravity anomalies has brought out undulations in the basement delineating two major depressions (i) near Tihki in the north and (ii) near Shahdol in the south, which divided into two sub-basins by an ENE–WSW trending basement ridge near Sidi. Maximum depth to the basement is about 5.5 km within the northern depression. The new magnetic data acquired over the basin has brought out ENE–WSW to E–W trending short wavelength magnetic anomalies which are attributed to volcanic dykes and intrusive having remanent magnetization corresponding to upper normal and reverse polarity (29N and 29R) of the Deccan basalt magnetostratigrahy. Analysis of remote sensing and geological data also reveals the predominance of ENE–WSW structural faults. Integration of remote sensing, geological and potential field data suggest reactivation of ENE–WSW trending basement faults during Deccan volcanism through emplacement of mafic dykes and sills. Therefore, it is suggested that South Rewa Gondwana basin has witnessed post rift tectonic event due to Deccan volcanism.