Groundwater recharge amidst focused stormwater infiltration

Distributed, infiltration‐based approaches to stormwater management are being implemented to mitigate effects of urban development on water resources. One of the goals of this type of storm water management, sometimes called low impact development or green infrastructure, is to maintain groundwater recharge and stream base flow at predevelopment levels. However, the connection between infiltration‐based stormwater management and groundwater recharge is not straightforward. Water infiltrated through stormwater facilities may be stored in soil moisture, taken up by evapotranspiration or contribute to recharge and eventually base flow. This study focused on a 1.1 km² suburban, low impact development watershed in Clarksburg, Maryland, USA, that was urbanized and contained 73 infiltration‐based stormwater facilities. Continuous water table measurements were used to quantify the movement of infiltrated stormwater. Time series analyses were performed on hydrographs of 7 wells, and the episodic master recession method was used. Persistence in water levels, as measured by autocorrelation function, was found to be positively related to depth to water. Storm properties (precipitation rate and duration) and well location (proximity to the nearest stream) were significant in driving episodic recharge to precipitation ratios. The well that had the highest recharge to precipitation ratios and water table rises of up to 1.5 m in response to storm events was located furthest from the stream and down gradient of stormwater infiltration locations. This work may be considered in evaluating the effects of planned watershed‐scale infiltration‐based stormwater management on groundwater flow systems.     

Modelling infiltration enhancement in a tropical urban catchment for improved stormwater management

To mitigate the impacts of impervious surfaces in urban areas, structures such as bioretention systems and permeable pavements have been installed to enhance infiltration in many countries. However, relatively little knowledge is available regarding the performance of such infiltration‐based structures in humid tropical and highly urbanized areas. This study investigates the feasibility of enhancing the infiltration of stormwater in tropical urbanized areas using Singapore as a case study. It first shows that the rainfall depth and intensity are both high, but the time interval between consecutive rainfall event is long in Singapore. It then numerically simulates single‐event local infiltration and finds that the fraction of infiltrated rainfall is actually high. It finally performs catchment‐scale simulations and finds that bioretention systems can enhance infiltration and groundwater recharge particularly during wet periods. However, local mounding of groundwater can be significant and can hinder the performance of those structures. Furthermore, with 5% of catchment area being converted to such structures, the infiltration of the entire catchment is enhanced but still not yet up to the natural level. To increase the overall effectiveness, future studies can look into bioretention systems with underdrain systems. Copyright © 2016 John Wiley & Sons, Ltd.     

A two‐dimensional model of hydraulic performance of stormwater infiltration systems

Stormwater infiltration systems are a popular method for urban stormwater control. They are often designed using an assumption of one‐dimensional saturated outflow, although this is not very accurate for many typical designs where two‐dimensional (2D) flows into unsaturated soils occur. Available 2D variably saturated flow models are not commonly used for design because of their complexity and difficulties with the required boundary conditions. A purpose‐built stormwater infiltration system model was thus developed for the simulation of 2D flow from a porous storage. The model combines a soil moisture–based model for unsaturated soils with a ponded storage model and uses a wetting front‐tracking approach for saturated flows. The model represents the main physical processes while minimizing input data requirements. The model was calibrated and validated using data from laboratory 2D stormwater infiltration trench experiments. Calibrations were undertaken using five different combinations of calibration data to examine calibration data requirements. It was found that storage water levels could be satisfactorily predicted using parameters calibrated with either data from laboratory soils tests or observed water level data, whereas the prediction of soil moistures was improved through the addition of observed soil moisture data to the calibration data set. Copyright © 2012 John Wiley & Sons, Ltd.     

Assessing urban rainfall-runoff response to stormwater management extent

We report an empirical analysis of the hydrologic response of three small, highly impervious urban watersheds to pulse rainfall events, to assess how traditional stormwater management (SWM) alters urban hydrographs. The watersheds vary in SWM coverage from 3% to 61% and in impervious cover from 45% to 67%. By selecting a set of storm events that involved a single rainfall pulse with >96% of total precipitation delivered in 60 min, we reduced the effect of differences between storms on hydrograph response to isolate characteristic responses attributable to watershed properties. Watershed-average radar rainfall data were used to generate local storm hyetographs for each event in each watershed, thus compensating for the extreme spatial and temporal heterogeneity of short-duration, intense rainfall events. By normalizing discharge values to the discharge peak and centring each hydrograph on the time of peak we were able to visualize the envelope of hydrographs for each group and to generate representative composite hydrographs for comparison across the three watersheds. Despite dramatic differences in the fraction of watershed area draining to SWM features across these three headwater tributaries, we did not find strong evidence that SWM causes significant attenuation of the hydrograph peak. Hydrograph response for the three watersheds is remarkably uniform despite contrasts in SWM, impervious cover and spatial patterns of land cover type. The primary difference in hydrograph response is observed on the recession limb of the hydrograph, and that change appears to be associated with higher storm-total runoff in the watersheds with more area draining to SWM. Our findings contribute more evidence to the work of previous authors suggesting that SWM is less effective at attenuating urban hydrographs than is commonly assumed. Our findings also are consistent with previous work concluding that percent impervious cover may have greater influence on runoff volume than percent SWM coverage.     

Modified models for better prediction of infiltration rates in trapezoidal permeable stormwater channels

ABSTRACT

In stormwater management, it is important to accurately quantify the infiltration rates to solve urban runoff-related problems. This study proposes a method to improve estimates of the infiltration rate in permeable stormwater channels. As part of the analysis, five infiltration models were evaluated: the Kostiakov, Horton, modified Kostiakov, Philip and SCS (Soil Conservation Service) models. Infiltration tests with various initial water levels were performed on channel models with differing base width and side slopes. The results show that the addition of three parameters that describe the trapezoidal cross-sectional area, i.e. the depth, side slope and base width, in the infiltration models yielded better estimates of the infiltration rate. A comparison of the infiltration capacity values obtained from the models after the three parameters were added with those that were experimentally obtained, shows that the improved modified Kostiakov model is the most suitable model to predict infiltration rates in trapezoidal permeable stormwater channels.     

Significance of stemflow in groundwater recharge. 2: A cylindrical infiltration model for evaluating the stemflow contribution to groundwater recharge

A primary model for evaluating the effect of stemflow on groundwater recharge has been developed. The model, a cylindrical infiltration model (CI model), is based on the infiltration area of stemflow-induced water instead of canopy projected area for determining the stemflow inputs to the soil surface. The estimated ratio of recharge rate by stemflow to the total recharge rate determined with this model agrees closely with values obtained from the mass balance of chloride in subsurface waters. This primary model is considered to be useful for estimating the effect of stemflow on groundwater recharge.     

A new saturated/unsaturated model for stormwater infiltration systems

Infiltration systems are widely used as an effective urban stormwater control measure. Most design methods and models roughly approximate the complex physical flow processes in these systems using empirical equations and fixed infiltration rates to calculate emptying times from full. Sophisticated variably saturated flow models are available, but rarely applied owing to their complexity. This paper describes the development and testing of an integrated one‐dimensional model of flow through the porous storage of a typical infiltration system and surrounding soils. The model accounts for the depth in the storage, surrounding soil moisture conditions and the interaction between the storage and surrounding soil. It is a front‐tracking model that innovatively combines a soil‐moisture‐based solution of Richard's equation for unsaturated flow with piston flow through a saturated zone as well as a reservoir equation for flow through a porous storage. This allows the use of a simple non‐iterative numerical solution that can handle ponded infiltration into dry soils. The model is more rigorous than approximate stormwater infiltration system models and could therefore be valuable in everyday practice. A range of test cases commonly used to test soil water flow models for infiltration in unsaturated conditions, drainage from saturation and infiltration under ponded conditions were used to test the model along with an experiment with variable depth in a porous storage over saturated conditions. Results show that the model produces a good fit to the observed data, analytical solutions and Hydrus. Copyright © 2008 John Wiley & Sons, Ltd.     

Temporal and spatial variation of infiltration in urban green infrastructure

Infiltration is the primary mechanism in green stormwater infrastructure (GSI) systems to reduce the runoff volume from urbanized areas. Soil hydraulic conductivity is most important in influencing GSI infiltration rates. Saturated hydraulic conductivity (Ksat) is a critical parameter for GSI design and post-construction performance. However, Ksat measurement in the field is problematic due to temporal and spatial variability and measurement errors. This review paper focuses on a comparison of methods for in-situ Ksat measurement and the causes of temporal and spatial variations of Ksat within GSI systems. Automated infiltration testing methods, such as the Modified Philip–Dunne (MPD) and SATURO infiltrometers, show promise for efficient Ksat measurements. Soil Ksat values can change over time and substantially vary throughout a GSI, which can be attributed to multiple factors, including but not limited to temperature changes, soil composition and properties, soil compaction level, plant root morphology and distribution, biological and macrofauna activities in the soil, inflow sediment characteristics, quality of infiltrating water, and measurement errors. There is evidence that infiltration rates in vegetated urban GSI systems are sustained given an appropriate GSI design, reasonable concentration of suspended sediments in the inflow runoff, and routine maintenance procedures. These observations indicate that clogging can be counteracted by processes that tend to increase the soil hydraulic conductivity (e.g., plant root and biological activities). This self-sustainability underlines that infiltration-based GSI systems are a reliable long-term stormwater management solution. Recommendations on how to incorporate the temporal changes of Ksat in GSI design and on obtaining a spatially-representative Ksat for the GSI design are presented.     

Coupled infiltration and filtration behaviours of concrete porous pavement for stormwater management

Cementitious porous pavement (CPP) is a structural low‐impact development material for rainfall–runoff management. Both infiltration and filtration are critical functions for CPP stormwater quality and quantity control. In this study, three groups of CPP specimens exposed to rainfall–runoff for 4 years and experienced with different maintenance intervals (6, 12 and 48 months, respectively) were used to examine CPP infiltration and filtration performance. Particle mass strained on CPP surface, saturated infiltration rate I_f, temporal infiltration rate I(t), suspended sediment concentration (SSC) and turbidity (τ) were measured to evaluate the process of filtration/infiltration. I(t), SSC and τ were examined less than 50 mg/l of the suspended particle loading. It was found that the CPP surface cleaning methods used in the past 4 years, namely, high pressure wash followed by vacuuming with one atmosphere (100 kPa), were effective, and a 12‐month maintenance interval was verified suitable to maintain the pore structure an acceptable infiltration rate for stormwater management. It was also found that CPP infiltration and filtration process affect each other, and the two properties are coupled in urban stormwater quality and quantity control. On the basis of the experimental measurements, the temporal infiltration rate of the cleaned CPP under a certain particle loading could be simulated by a first‐order nonlinear rational model, and effluent turbidity–SSC relationship was found following a power law. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis and integrated modelling of groundwater infiltration to sewer networks

Infiltration of groundwater to sewer systems is a problem for the capacity of the system as well as for treatment processes at waste water treatment plants. This paper quantifies the infiltration of groundwater to a sewer system in Frederikshavn Municipality, Denmark, by measurements of sewer flow and novel model set‐up, which simulates the interaction between groundwater and sewer flow. The study area has a separate waste water sewer system, but the discharged volumes from the system are approximately twice the volumes from a tight system without infiltration. The model set‐up makes use of two commercial models: mike she for simulation of groundwater transport and mike urban (mouse ) [DHI, Hørsholm, Denmark] for simulation of sewer flow. By simulating the groundwater level and calibrating infiltration coefficients against sewer flow measurements, it has been possible to estimate the average infiltration to the sewer system with satisfying results. The infiltration processes are indeed complicated and to a large degree heterogeneous throughout the sewer system. The paper shows contribution from both saturated and unsaturated groundwater zones, which makes the modelling process complex. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling the impact of stormwater source control infiltration techniques on catchment baseflow

Stormwater management increasingly recognises the need to emulate, to the maximum extent possible, the flow regime of receiving waters in their pre‐development state. Hydrological models play a central role in assessing the catchment‐scale impacts of alternative stormwater management strategies. However, because of the complexity of physical processes involved in urban hydrology, particularly subsurface flows, the predictive performance of such models is often low. We investigated how the structure of hydrological models influenced the prediction of urbanisation and stormwater management impacts on baseflow. We calibrated three conceptual models of the same reference catchment and compared the modelled flow regime from different stormwater management scenarios, using each of the three model structures. Scenarios were assessed using six metrics, characterising the whole streamflow regime and in particular baseflow. Although the three models of the reference catchment represented the observed hydrograph well, the most complex structure developed using a thorough diagnostic of the catchment behaviour better captured the change in hydrological regime during dry years. Predictions of baseflow changes due to urbanisation varied significantly according to the model structure. Similarly, the models showed distinct responses to the stormwater management scenarios applied, especially for scenarios involving infiltration of stormwater at source. Our results confirm the importance of predicting the consequences of land use changes with conceptual models that are consistent with the hydrological behaviour of the study catchment. Future work should help to quantify the uncertainties due to model structure and thus provide practical guidance to the use of catchment models for assessing stormwater management strategies. Copyright © 2013 John Wiley & Sons, Ltd.     

Quantifying annual groundwater recharge and storage in the central Sierra Nevada using naturally occurring 35S

Identifying aquifer vulnerability to climate change is of vital importance in the Sierra Nevada and other snow‐dominated basins where groundwater systems are essential to water supply and ecosystem health. Quantifying the component of new (current year's) snowmelt in groundwater and surface water is useful in evaluating aquifer vulnerability because significant annual recharge may indicate that streamflow will respond rapidly to annual variability in precipitation, followed by more gradual decreases in recharge as recharge declines over decades. Hydrologic models and field‐based studies have indicated that young (<1 year) water is an important component of streamflow. The goal of this study was to utilize the short‐lived, naturally occurring cosmogenic isotope sulfur‐35 (³⁵S) to quantify new snowmelt contribution to groundwater and surface waters in Sagehen Creek Basin (SCB) and Martis Valley Groundwater Basin (MVGB) located within the Tertiary volcanics of the central Sierra Nevada, CA. Activities of ³⁵S were measured in dissolved sulfate (³⁵SO₄^2?) in SCB and MVGB snowpack, groundwater, springs, and streamflow. The percent of new snowmelt (PNS) in SCB streamflow ranged from 0.2 ± 6.6% during baseflow conditions to 14.0 ± 3.4% during high‐flow periods of snowmelt. Similar to SCB, the PNS in MVGB groundwater and streamflow was typically <30% with the largest fractions occurring in late spring or early summer following peak streamflow. The consistently low PNS suggests that a significant fraction of annual snowmelt in SCB and MVGB recharges groundwater, and groundwater contributions to streamflow in these systems have the potential to mitigate climate change impacts on runoff.     

内蒙古达里诺尔湖流域地表水和地下水环境同位素特征及补给关系

为了探明达里诺尔湖流域地表水与地下水的氢(H)、氧(O)同位素的变化特征及相互补给关系,于2013年对达里诺尔湖及其周围的河水、井水、泉水中H、O同位素进行了取样分析,并结合总溶解性固体悬浮物(TDS)和区域水文地质对达里诺尔湖流域的补给关系进行讨论分析.结果表明:1)河水、泉水、井水中H、O同位素的值基本落在全球雨水线上,湖水H、O同位素落在全球雨水线的右下方,说明河水、井水、泉水没有发生蒸发分馏,而湖水则发生较大程度的蒸发分馏;对达里诺尔湖流域地表水与地下水的H、O同位素进行回归模拟,得出该区域的蒸发趋势线方程:δD=4.8753δ18O-20.139(n=32,R2=0.9968).蒸发线表明,这些水样具有相同水源的特征.2)从实地考察发现,泉水补给河水,泉水和河水补给湖水,同时井水、泉水和河水有相似的δD、δ18O和TDS值,且不随季节变化而变化,推断达里诺尔湖附近地下水补给湖水;区域水文地质条件亦证明达里诺尔湖周边地下水补给湖水.     

Effects of bottleneck blockage on the resilience of an urban stormwater drainage system

ABSTRACT

Severe urban floods have frequently caused social and financial infrastructure problems due to a lack of hydraulic capacity of urban drainage systems or the structural failure of network elements. Conventional, reliability-based design methods of drainage networks only provide acceptable performance under expected conditions of loading. In this study, a new approach based on resilience is proposed for the rehabilitation of urban drainage systems; this approach is able to maintain a predefined service level under both external and unexpected internal loads, including different scenarios of blockage and a severe rainfall event. The performance of different design methods: resilient, non-resilient, deterministic and uncertain models, is comprehensively compared and the most appropriate approaches are introduced. The results show that the new resilient approach outperforms conventional design/rehabilitation methods in terms of flood volume reduction. Additionally, the single blockage scheme and the Poisson distribution-based model show the best performance to enhance the resilience of the network.     

Variably saturated groundwater modelling for optimizing managed aquifer recharge using trench infiltration

Spreading‐basin methods have resulted in more than 130 million cubic metres of recharge to the unconfined Navajo Sandstone of southern Utah in the past decade, but infiltration rates have slowed in recent years because of reduced hydraulic gradients and (or) clogging. Trench infiltration is a promising alternative technique for increasing recharge and minimizing evaporation. This paper uses a variably saturated flow model to further investigate the relative importance of the following variables on rates of trench infiltration to unconfined aquifers: saturated hydraulic conductivity, trench spacing and dimensions, initial water‐table depth, alternate wet/dry periods, and number of parallel trenches. Modelling results showed (1) increased infiltration with higher hydraulic conductivity, deeper initial water tables, and larger spacing between parallel trenches, (2) deeper or wider trenches do not substantially increase infiltration, (3) alternating wet/dry periods result in less overall infiltration than keeping the trenches continuously full, and (4) larger numbers of parallel trenches within a fixed area increases infiltration but with a diminishing effect as trench spacing becomes tighter. An empirical equation for estimating expected trench infiltration rates as a function of hydraulic conductivity and initial water‐table depth was derived and can be used for evaluating feasibility of trench infiltration in other hydrogeologic settings. Copyright © 2014 John Wiley & Sons, Ltd.     

Quantifying chloride retention and release in urban stormwater management ponds using a mass balance approach

Chloride (Cl⁻) in urban waterways largely originates from runoff containing deicing salts. Cl⁻ is retained in watersheds after deicing ends, resulting in deleterious effects on aquatic biota. Stormwater management ponds (SWMPs), designed to mitigate ‘flashy’ urban runoff response, are known to impact pollutant transport. However, there is little information on what role SWMPs play in the timing and magnitude of Cl⁻ transport over different timescales. This study quantifies the mass of Cl⁻ retained in two SWMPs over varying timescales. Both ponds are in an urbanizing watershed in south-central Ontario; one drains a commercial area, the other, a residential area. High frequency measurements of water level and specific conductivity, from which flow and Cl⁻ concentration were derived, were taken with sensors at pond inlets and outlets. For one SWMP, data were also collected upstream and downstream of the confluence of the pond outflow and the receiving creek to quantify the in-stream response to Cl⁻-laden pond outflows. The findings suggest that SWMPs likely play a role in watershed-scale Cl⁻ retention; one SWMP consistently retained Cl⁻ while the other had variable retention and release of Cl⁻. In the receiving creek, Cl⁻ concentrations downstream of the pond exceeded the acute toxicity threshold for aquatic organisms twice as often as concentrations upstream of the pond, and Cl⁻ pulses corresponded to Cl⁻ release events from the pond. The results of this study suggest that SWMPs concentrate spatially distributed salt inputs and modify the timing and magnitude of their release to receiving streams. Stream reaches that receive water inputs from SWMPs may be more vulnerable to Cl⁻ toxicity than reaches that do not receive flow via SWMPs. The results of this study will help parameterize the role of SWMPs in watershed-scale Cl⁻ transport models and geospatial models of salt vulnerable areas.     

Modelling of groundwater mound formation resulting from transient recharge

An analytical solution of a linearized Boussinesq equation is obtained to predict water table fluctuations as a result of time varying recharge from a strip basin for any number of recharge cycles. The analytical solution is obtained by using finite Fourier sine transform. Applications of the solution for the prediction of water table fluctuations and sensitivity analysis are demonstrated with the help of example problems. Copyright © 2001 John Wiley & Sons, Ltd.     

Bedrock infiltration and mountain block recharge accounting using chloride mass balance

Mountain front catchment net groundwater recharge (NR) represents the upper end of mountain block recharge (MBR) groundwater flow paths. Using environmental chloride in precipitation, streamflow and groundwater, we apply chloride mass balance (CMB) to estimate NR at multiple catchment scales within the 27 km² Dry Creek Experimental Watershed (DCEW) on the Boise Front, southwestern Idaho. The estimate for average annual precipitation partitioning to NR is approximately 14% for DCEW. In contrast, as much as 44% of annual precipitation routes to NR in ephemeral headwater catchments. NR in headwater catchments is likely routed to downgradient springs, baseflow, and MBR, while downgradient streamflow losses contribute further to MBR. A key assumption in the CMB approach is that the change in stored chloride during the study period is zero. We found that this assumption is violated in some individual years, but that a 5‐year integration period is sufficient. Copyright © 2011 John Wiley & Sons, Ltd.     

Reliability of recharge rates estimated from groundwater age with a simplified analytical approach

Groundwater age is often used to estimate groundwater recharge through a simplified analytical approach. This estimated recharge is thought to be representative of the mean recharge between the point of entry and the sampling point. However, given the complexity in actual recharge, whether the mean recharge is reasonable is still unclear. This study examined the validity of the method to estimate long-term average groundwater recharge and the possibility of obtaining reasonable spatial recharge pattern. We first validated our model in producing reasonable age distributions using a constant flux boundary condition. We then generated different flow fields and age patterns by using various spatially varying flux boundary conditions with different magnitudes and wavelengths. Groundwater recharge was estimated and analysed afterwards using the method at the spatial scale. We illustrated the main findings with a field example in the end. Our results suggest that we can estimate long-term average groundwater recharge with 10% error in many parts of an aquifer. The size of these areas decreases with the increase in both the amplitude and the wavelength. The chance of obtaining a reasonable groundwater recharge is higher if an age sample is collected from the middle of an aquifer and at downstream areas. Our study also indicates that the method can also be used to estimate local groundwater recharge if age samples are collected close to the water table. However, care must be taken to determine groundwater age regardless of conditions.     

Evaluation of distributed BMPs in an urban watershed—High resolution modeling for stormwater management

The urban environment modifies the hydrologic cycle resulting in increased runoff rates, volumes, and peak flows. Green infrastructure, which uses best management practices (BMPs), is a natural system approach used to mitigate the impacts of urbanization onto stormwater runoff. Patterns of stormwater runoff from urban environments are complex, and it is unclear how efficiently green infrastructure will improve the urban water cycle. These challenges arise from issues of scale, the merits of BMPs depend on changes to small‐scale hydrologic processes aggregated up from the neighborhood to the urban watershed. Here, we use a hyper‐resolution (1 m), physically based hydrologic model of the urban hydrologic cycle with explicit inclusion of the built environment. This model represents the changes to hydrology at the BMP scale (~1 m) and represents each individual BMP explicitly to represent response over the urban watershed. Our study varies both the percentage of BMP emplacement and their spatial location for storm events of increasing intensity in an urban watershed. We develop a metric of effectiveness that indicates a nonlinear relationship that is seen between percent BMP emplacement and storm intensity. Results indicate that BMP effectiveness varies with spatial location and that type and emplacement within the urban watershed may be more important than overall percent.