Microplastics as contaminants in the marine environment: a review

Since the mass production of plastics began in the 1940s, microplastic contamination of the marine environment has been a growing problem. Here, a review of the literature has been conducted with the following objectives: (1) to summarise the properties, nomenclature and sources of microplastics; (2) to discuss the routes by which microplastics enter the marine environment; (3) to evaluate the methods by which microplastics are detected in the marine environment; (4) to assess spatial and temporal trends of microplastic abundance; and (5) to discuss the environmental impact of microplastics. Microplastics are both abundant and widespread within the marine environment, found in their highest concentrations along coastlines and within mid-ocean gyres. Ingestion of microplastics has been demonstrated in a range of marine organisms, a process which may facilitate the transfer of chemical additives or hydrophobic waterborne pollutants to biota. We conclude by highlighting key future research areas for scientists and policymakers.     

High-levels of microplastic pollution in a large,remote, mountain lake

Despite the large and growing literature on microplastics in the ocean, little information exists on microplastics in freshwater systems. This study is the first to evaluate the abundance, distribution, and composition of pelagic microplastic pollution in a large, remote, mountain lake. We quantified pelagic microplastics and shoreline anthropogenic debris in Lake Hovsgol, Mongolia. With an average microplastic density of 20,264 particles km⁻², Lake Hovsgol is more heavily polluted with microplastics than the more developed Lakes Huron and Superior in the Laurentian Great Lakes. Fragments and films were the most abundant microplastic types; no plastic microbeads and few pellets were observed. Household plastics dominated the shoreline debris and were comprised largely of plastic bottles, fishing gear, and bags. Microplastic density decreased with distance from the southwestern shore, the most populated and accessible section of the park, and was distributed by the prevailing winds. These results demonstrate that without proper waste management, low-density populations can heavily pollute freshwater systems with consumer plastics.     

Large microplastic particles in sediments of tributaries of the River Thames,UK – Abundance,sources and methods for effective quantification

Sewage effluent input and population were chosen as predictors of microplastic presence in sediments at four sites in the River Thames basin (UK). Large microplastic particles (1 mm–4 mm) were extracted using a stepwise approach to include visual extraction, flotation and identification using Raman spectroscopy. Microplastics were found at all four sites. One site had significantly higher numbers of microplastics than other sites, average 66 particles 100 g^? 1, 91% of which were fragments. This site was downstream of a storm drain outfall receiving urban runoff; many of the fragments at this site were determined to be derived of thermoplastic road-surface marking paints. At the remaining three sites, fibres were the dominant particle type. The most common polymers identified included polypropylene, polyester and polyarylsulphone. This study describes two major new findings: presence of microplastic particles in a UK freshwater system and identification of road marking paints as a source of microplastics.

Occurrence and distribution of microplastics in marine sediments along the Belgian coast

Plastic debris is known to undergo fragmentation at sea, which leads to the formation of microscopic particles of plastic; the so called ‘microplastics’. Due to their buoyant and persistent properties, these microplastics have the potential to become widely dispersed in the marine environment through hydrodynamic processes and ocean currents. In this study, the occurrence and distribution of microplastics was investigated in Belgian marine sediments from different locations (coastal harbours, beaches and sublittoral areas).Particles were found in large numbers in all samples, showing the wide distribution of microplastics in Belgian coastal waters. The highest concentrations were found in the harbours where total microplastic concentrations of up to 390 particles kg⁻¹ dry sediment were observed, which is 15-50 times higher than reported maximum concentrations of other, similar study areas.The depth profile of sediment cores suggested that microplastic concentrations on the beaches reflect the global plastic production increase.     

长江中下游典型浅水湖泊表层水体微塑料时空分布特征——以湖北保安湖为例

以湖北保安湖为研究对象,分别于2021年4、7、10月和2022年1月采集表层水样,测定水体中微塑料丰度、粒径、形状、颜色和类型,探究浅水型湖泊表层水体中微塑料的时空分布特征及其影响因素。结果表明,保安湖表层水体微塑料的年平均丰度为(16.20±2.23)items/L。微塑料丰度呈现明显的季节性差异,其中夏季(采样时间7月)平均丰度最低,为(1.40±0.09)items/L。在所有微塑料颗粒中,粒径0.064～1 mm占比最大,为82.57%;黑色和无色微塑料占主导地位,占比分别为36.16%和21.31%;纤维状微塑料分布最广泛,占比达40.01%;聚乙烯(PE)和低密度聚乙烯(LDPE)是最主要的微塑料类型,两者之和占比达46.05%,其次为聚苯乙烯(PS,占比17.2%)、聚对苯二甲酸乙二醇酯(PET,占比8.33%)和聚乙酸乙酯(PVAC,占比8.31%)。统计分析表明,微塑料丰度与湖水水质无显著相关关系。该研究揭示了长江中下游地区典型浅水湖泊微塑料分布现状,为评估类似湖泊微塑料潜在污染风险提供了科学依据。     

Boring crustaceans damage polystyrene floats under docks polluting marine waters with microplastic

Boring isopods damage expanded polystyrene floats under docks and, in the process, expel copious numbers of microplastic particles. This paper describes the impacts of boring isopods in aquaculture facilities and docks, quantifies and discusses the implications of these microplastics, and tests if an alternate foam type prevents boring. Floats from aquaculture facilities and docks were heavily damaged by thousands of isopods and their burrows. Multiple sites in Asia, Australia, Panama, and the USA exhibited evidence of isopod damage. One isopod creates thousands of microplastic particles when excavating a burrow; colonies can expel millions of particles. Microplastics similar in size to these particles may facilitate the spread of non-native species or be ingested by organisms causing physical or toxicological harm. Extruded polystyrene inhibited boring, suggesting this foam may prevent damage in the field. These results reveal boring isopods cause widespread damage to docks and are a novel source of microplastic pollution.     

Improved understanding of dynamic water and mass budgets of high-alpine karst systems obtained from studying a well-defined catchment area

Large areas of Europe, especially in the Alps, are covered by carbonate rocks and in many alpine regions, karst springs are important sources for drinking water supply. Because of their high variability and heterogeneity, the understanding of the hydrogeological functioning of karst aquifers is of particular importance for their protection and utilisation. Climate change and heavy rainfall events are major challenges in managing alpine karst aquifers which possess an enormous potential for future drinking water supply. In this study, we present research from a high-alpine karst system in the UNESCO Biosphere Reserve Großes Walsertal in Austria, which has a clearly defined catchment and is drained by only one spring system. Results show that (a) the investigated system is a highly dynamic karst aquifer with distinct reactions to rainfall events in discharge and electrical conductivity; (b) the estimated transient atmospheric CO₂ sink is about 270 t/a; (c) the calculated carbonate rock denudation rate is between 23 and 47 mm/1000a and (d) the rainfall-discharge behaviour and the internal flow dynamics can be successfully simulated using the modelling package KarstMod. The modelling results indicate the relevance of matrix storage in determining the discharge behaviour of the spring, particularly during low-flow periods. This research and the consequent results can contribute and initiate a better understanding and management of alpine karst aquifers considering climate change with more heavy rainfall events and also longer dry periods.     

Contributing to marine pollution by washing your face: Microplastics in facial cleansers

Plastics pollution in the ocean is an area of growing concern, with research efforts focusing on both the macroplastic (>5 mm) and microplastic (<5 mm) fractions. In the 1990s it was recognized that a minor source of microplastic pollution was derived from liquid hand-cleansers that would have been rarely used by the average consumer. In 2009, however, the average consumer is likely to be using microplastic-containing products on a daily basis, as the majority of facial cleansers now contain polyethylene microplastics which are not captured by wastewater plants and will enter the oceans. Four microplastic-containing facial cleansers available in New Zealand supermarkets were used to quantify the size of the polythelene fragments. Three-quarters of the brands had a modal size of <100 microns and could be immediately ingested by planktonic organisms at the base of the food chain. Over time the microplastics will be subject to UV-degradation and absorb hydrophobic materials such as PCBs, making them smaller and more toxic in the long-term. Marine scientists need to educate the public to the dangers of using products that pose an immediate and long-term threat to the health of the oceans and the food we eat.     

Interpretation of groundwater level monitoring results in karst aquifers: examples from the Dinaric karst

The paper presents an attempt to determine the characteristics of karst aquifers using information on groundwater level (GWL) in natural holes and boreholes with different data quantity and time resolution of GWL measurements. In this paper the particulars of karst aquifers were analysed for four examples from the Dinaric karst. In all four study areas, aquifers are formed in bare, deep and well‐developed Dinaric karst consisting of Cretaceous limestones. The first example represents a wide area of Imotsko polje in the karst. The aquifer was analysed on the basis of infrequent water level monitoring in natural karst water features (jamas, lakes, wells) and discharges of springs and rivers. The karst aquifer in this example is complex, non‐homogenous and variable in space and time, which is frequent in the Dinaric karst. Regardless of the aforementioned it was possible to determine its elementary characteristics. The second example represents 10 wells used for the water supply for the city of Pula. The GWL and salinity were measured once a week in the period between 1981 and 1996. Even though these measurements were relatively infrequent in space and time, they served as bases for assessment of average and maximum aquifer conditions as well as boundaries of saltwater intrusion. In the third example only a portion of aquifer of the karst spring Blaz, which is in the contact with the Adriatic Seas, has been analyzed. It is a spring with an intrusion of salt water. For purposes of study of saltwater intrusion, 26 piezometers were drilled in its vicinity in which GWL, salinity and temperature were measured once a day during 168 days, a period comprising one complete cycle of seawater intrusion and retreat. These measurements proved the existence of dispersed discharge from the aquifer into the sea and its non‐homogeneity in space. In the fourth example GWL was measured continuously in 10 deep (up to 300 m) piezometers in the hinterland of the Ombla Spring catchment. The measurement period lasted 2 years (January 1988 to December 1989). The analyses are made with hourly data. The results made it possible to determine numerous characteristics of the karst aquifer and a significant non‐homogeneity of groundwater distribution in karst aquifers, depending more on the underground karst phenomena than the surface karst forms. Copyright © 2000 John Wiley & Sons, Ltd.     

Quantifying the role of karstic groundwater in a snowmelt-dominated hydrologic system

River discharge in mountainous regions of the world is often dominated by snowmelt, but base flows are sustained primarily by groundwater storage and discharge. Although numerous recent studies have focused on base-flow discharge in mountain systems, almost no work has explicitly investigated the role of karst groundwater in these systems across a full range of flow conditions. We directly measured groundwater discharge from 48 karst springs in the Kaweah River and its five forks in the Sierra Nevada mountains, California, United States. Relationships between spring and river discharge showed that karst aquifers and springs provide significant storage and delayed discharge to the river. Regression models showed that, of all potential seasonal groundwater storage compartments in the river basin, the area of karst (0.1–4.4%) present provides the best explanation of base-flow recession in each fork of the Kaweah River (directly measured contributions from karst springs ranged from 3.5 to 16% during high-flow to 20 to 65% during base-flow conditions). These results show that, even in settings where karst represents a small portion of basin area, it may play an over-sized role in seasonal storage and water resources in mountain systems. Karst aquifers are the single most important non-snow storage component in the Kaweah River basin, and likely provide similar water storage capacities and higher base flows in other mountain river systems with karst when compared with systems without karst.     

Review of Laboratory Scale Models of Karst Aquifers: Approaches,Similitude, and Requirements

This review focuses on investigations of groundwater flow and solute transport in karst aquifers through laboratory scale models (LSMs). In particular, LSMs have been used to generate new data under different hydraulic and contaminant transport conditions, testing of new approaches for site characterization, and providing new insights into flow and transport processes through complex karst aquifers. Due to the increasing need for LSMs to investigate a wide range of issues, associated with flow and solute migration karst aquifers this review attempts to classify, and introduce a framework for constructing a karst aquifer physical model that is more representative of field conditions. The LSMs are categorized into four groups: sand box, rock block, pipe/fracture network, and pipe-matrix coupling. These groups are compared and their advantages and disadvantages highlighted. The capabilities of such models have been extensively improved by new developments in experimental methods and measurement devices. Newer technologies such as 3D printing, computed tomography scanning, X-rays, nuclear magnetic resonance, novel geophysical techniques, and use of nanomaterials allow for greater flexibilities in conducting experiments. In order for LSMs to be representative of karst aquifers, a few requirements are introduced: (1) the ability to simulate heterogeneous distributions of karst hydraulic parameters, (2) establish Darcian and non-Darcian flow regimes and exchange between the matrix and conduits, (3) placement of adequate sampling points and intervals, and (4) achieving some degree of geometric, kinematic, and dynamic similitude to represent field conditions.     

Analysis of karst aquifer spring flows with a gray system decomposition model

There are approximately 470,000 km(2) of karst aquifers that feed many large springs in North China. Turbulent flow often exists in these karst aquifers, which means that the classical ground water model based on Darcy's law cannot be applied here. Ground water data are rare for these aquifers. As a consequence, it is difficult to quantitatively investigate ground water flow in these karst systems. The purpose of this study is to develop a parsimonious model that predicts karst spring discharge using gray system theory. In this theory, a white color denotes a system that is completely characterized and a black color represents a system that is totally unknown. A gray system thus describes a complex system whose characteristics are only partially known or known with uncertainty. Using this theory, we investigated the karst spring discharge time series over different time scales. First, we identified three specific components of spring discharge: the long-term trend, periodic variation, and random fluctuation. We then used the gray system model to simulate the long-term trend and obtain periodic variation and random fluctuation components. Subsequently, we developed a predictive model for karst spring discharge. Application of the model to Liulin Springs, a representative example of karst springs in northern China, shows that the model performs well. The predicted results suggest that the Liulin Springs discharge will likely decrease over time, with small fluctuations.     

Characterizing moldic and vuggy pore space in karst aquifers using borehole-wall,slabbed-core and thin-section images

Carbonate aquifers are prolific and important sources of potable water in many parts of the world owing to enlarged dissolution features that enhance porosity and interconnectivity. To better understand the variations of pore space in different karst aquifers, image and geospatial analyses are used to analyze pore attributes (i.e., pore area and perimeter) in images of vuggy aquifers. Pore geometry and 2D porosity derived from images of the moldic Castle Hayne and vuggy Biscayne aquifers are analyzed at three scales of observation: borehole televiewer, core and thin-section. The Castle Hayne and Biscayne aquifers are the foci of this study because the pore spaces that control the hydrologic properties in each of these aquifers are markedly different even though both of these carbonate reservoirs are prolific aquifers. Assessments of pore area, perimeter and shape index (a measure of shape complexity) indicate that pore geometries and pore complexities vary as a function pore type and scale of observation. For each aquifer type, the areas, perimeters and complexities of pores are higher at the larger scale of observation (e.g., borehole) than the smaller scale of observation (e.g., thin section). When the complexity of the moldic pores is compared to the complexity of vuggy pores, the results indicate that moldic pores are generally more complex than vuggy pores at the same scale of observation. Whereas estimates of 2D porosity from the borehole televiewer image of the vuggy aquifer are higher than those derived from the moldic aquifer, the range of 2D porosities is larger in core and thin section images for the vuggy aquifer than the moldic aquifer. A model for the development of pores is presented that suggests that the coalescence of small pores with simple shapes leads to the growth of larger pores with more complex shapes. The model suggests that the younger Biscayne aquifer is a more mature karst than the Castle Hayne aquifer.     

Assessment of marine debris on the Belgian Continental Shelf

A comprehensive assessment of marine litter in three environmental compartments of Belgian coastal waters was performed. Abundance, weight and composition of marine debris, including microplastics, was assessed by performing beach, sea surface and seafloor monitoring campaigns during two consecutive years. Plastic items were the dominant type of macrodebris recorded: over 95% of debris present in the three sampled marine compartments were plastic. In general, concentrations of macrodebris were quite high. Especially the number of beached debris reached very high levels: on average 6429 ± 6767 items per 100 m were recorded. Microplastic concentrations were determined to assess overall abundance in the different marine compartments of the Belgian Continental Shelf. In terms of weight, macrodebris still dominates the pollution of beaches, but in the water column and in the seafloor microplastics appear to be of higher importance: here, microplastic weight is approximately 100 times and 400 times higher, respectively, than macrodebris weight.     

A Waste Treatment/Disposal Site Evaluation Process for Areas Underlain by Carbonate Aquifers

Fractured carbonate or karst aquifers are highly susceptible to contamination. In Minnesota, the areas underlain by karst aquifers are often characterized by thin soil cover, poorly cased wells and/or collapse features. When coupled with improper land use decisions these aquifers have become extensively contaminated.
Evaluation of existing or potentially contaminated sites has required development of unique site evaluation techniques or combinations of techniques. Shallow geophysics have been used successfully to determine subsurface karst features, pinpoint locations for additional investigations and evaluate pump-test data. Soil texture, density and relative moisture content have been closely examined and criteria established to evaluate subsurface erosion susceptibility. Percent rock core recovery, mechanical response of drilling and drilling fluid loss have been used to characterize the secondary porosity and potential contamination susceptibility of the carbonate rock. Dye tracing via surface sinks and well injection have determined primary flow paths and have been useful in estimating flow times.
These techniques used solely or in conjunction have been very useful in evaluating contamination existing in the aquifers and as a predictive tool to evaluate the proposed land uses impacts.     

Neustonic microplastic and zooplankton in the North Western Mediterranean Sea

Neustonic microplastic and zooplankton abundance was determined in the North Western Mediterranean Sea during a summer cruise between July 9th and August 6th 2010, with a break between July 22 th and 25th due to a strong wind event. Ninety percent of the 40 stations contained microplastic particles (size 0.3-5mm) of various compositions: e.g., filaments, polystyrene, thin plastic films. An average concentration of 0.116 particles/m(2) was observed. The highest abundances (>0.36 particles/m(2)) were observed in shelf stations. The neustonic plastic particles concentrations were 5 times higher before than after the strong wind event which increased the mixing and the vertical repartition of plastic particles in the upper layers of the water column. The values rise in the same order of magnitude than in the North Pacific Gyre. The average ratio between microplastics and mesozooplankton weights was 0.5 for the whole survey and might induce a potential confusion for zooplankton feeders.     

Colonization by aerobic bacteria in karst: laboratory and in situ experiments

Experiments were carried out to investigate the potential for bacterial colonization of different substrates in karst aquifers and the nature of the colonizing bacteria. Laboratory batch experiments were performed using limestone and PVC as substrates, a natural bacterial isolate and a known laboratory strain (Escherichia coli [E. coli]) as inocula, and karst ground water and a synthetic formula as growth media. In parallel, fragments of limestone and granite were submerged in boreholes penetrating two karst aquifers for more than one year; the boreholes are periodically contaminated by enteric bacteria from waste water. Once a month, rock samples were removed and the colonizing bacteria quantified and identified. The batch experiments demonstrated that the natural isolate and E. coli both readily colonized limestone surfaces using karst ground water as the growth medium. In contrast, bacterial colonization of both the limestone and granite substrates, when submerged in the karst, was less intense. More than 300 bacterial strains were isolated over the period sampled, but no temporal pattern in colonization was seen as far as strain, and colonization by E. coli was notably absent, although strains of Salmonella and Citrobacter were each observed once. Samples suspended in boreholes penetrating highly fractured zones were less densely colonized than those in the borehole penetrating a less fractured zone. The results suggest that contamination of karst aquifers by enteric bacteria is unlikely to be persistent. We hypothesize that this may be a result of the high flow velocities found in karst conduits, and of predation of colonizing bacteria by autochthonous zooplankton.     

Springflow hydrographs: eogenetic vs. telogenetic karst

Matrix permeability in the range of 10(-11) to 10(-14) m(2) characterizes eogenetic karst, where limestones have not been deeply buried. In contrast, limestones of postburial, telogenetic karst have matrix permeabilities on the order of 10(-15) to 10(-20) m(2). Is this difference in matrix permeability paralleled by a difference in the behavior of springs draining eogenetic and telogenetic karst? Log Q/Q(min) flow duration curves from 11 eogenetic-karst springs in Florida and 12 telogenetic-karst springs in Missouri, Kentucky, and Switzerland, plot in different fields because of the disparate slopes of the curves. The substantially lower flow variability in eogenetic-karst springs, which results in the steeper slopes of their flow duration curves, also makes for a strong contrast in patterns (e.g., "flashiness") between the eogenetic-karst and telogenetic-karst spring hydrographs. With respect to both spring hydrographs and the flow duration curves derived from them, the eogenetic-karst springs of Florida are more like basalt springs of Idaho than the telogenetic-karst springs of the study. From time-series analyses on discharge records for 31 springs and published time-series results for 28 additional sites spanning 11 countries, we conclude that (1) the ratio of maximum to mean (Q(max)/Q(mean)) discharge is less in springs of eogenetic karst than springs of telogenetic karst; (2) aquifer inertia (system memory) is larger in eogenetic karst; (3) eogenetic-karst aquifers take longer to respond to input signals; and (4) high-frequency events affect discharge less in eogenetic karst. All four of these results are consistent with the hypothesis that accessible storage is larger in eogenetic-karst aquifers than in telogenetic-karst aquifers.     

Comparison of Recharge Estimation Methods During a Wet Period in a Karst Aquifer

Management of water resources, implying their appropriate protection, calls for a sound evaluation of recharge. Such assessment is very complex in karst aquifers. Most methods are developed for application to detrital aquifers, without taking into account the extraordinary heterogeneity of porosity and permeability of karst systems. It is commonly recommended to estimate recharge using multiple methods; however, differences inherent to the diverse methods make it difficult to clarify the accuracy of each result. In this study, recharge was estimated in a karst aquifer working in a natural regime, in a Mediterranean‐type climate, in the western part of the Sierra de las Nieves (southern Spain). Mediterranean climate regions are characterized by high inter‐annual rainfall variability featuring long dry periods and short intense wet periods, the latter constituting the most important contribution to aquifer water input. This paper aims to identify the methods that provide the most plausible range of recharge rate during wet periods. Six methods were tested: the classical method of Thornthwaite‐Mather, the Visual Balan code, the chloride balance method, and spatially distributed methods such as APLIS, a novel spatiotemporal estimation of recharge, and ZOODRM. The results help determine valid methods for application in the rest of the unit of study and in similar karst aquifers.