滇西昌宁—孟连带的地层格架

显生宙地层在昌宁—孟连带呈南北向条带状分布,根据不同岩性的横向分布和纵向变化情况,可将带中的地层序列大致划分成4种类型:(1)碎屑岩向上夹灰岩透镜体,并变成细粒碎屑岩和硅质岩交互出现;(2)碎屑岩向上夹灰岩透镜体、少量硅质岩,顶部为二叠纪基性火山岩;(3)碎屑岩—基性火山岩/火山碎屑岩—碳酸盐岩—碎屑岩;(4)灰岩、白云质灰岩—灰黑色薄层灰岩、泥质灰岩、泥岩夹硅质泥岩。理清不同岩石地层单位间的关系是客观解释昌宁—孟连带发展演化的前提。     

Stratigraphic framework of the thrust geometry and structural inversion in the southeastern Pyrenees : La Garrotxa area

Abstract

The structure of la Garrotxa area within the Cadi unit (south-eastern Pyrenees) consists of a set of duplexes at different scales which repeat the different carbonatic litho-units of the Lower and Middle Eocene. These duplexes are folded by antiformal stacks structures with basement rocks in their cores. The north boundary of these antiformal stacks represents an inversion of pre-existent extensional faults which formed half-graben geometries. The basement rocks involved in the structure represent short-cuts formed in the footwall of the extensional faults. All thrusts of La Garrotxa area branch with the upper Garrotxa thrust. The more complex structure of La Garrotxa area than the adjacent areas within the Cadí unit, is due to the initial complex synsedimentary geometry of the sedimentary pile.

The Cadi unit overlies the Serrat unit with a hangingwall ramp geometry. This unit was deduced from the Serrat-1 well, drilled in 1987. The Serrat unit is made up of a Middle Eocene evaporitic sequence, with alternating shales and anhydrites and a 100 meters thick salt layer close to the top. The total thickness of this evaporitic Beuda sequence is 1 000 meters. The Beuda sequence clearly controlled the thrust geometry of the younger thrusts.     

Local displacement rate cycles in the life of a fold-thrust belt

The evolution of minor structures during the growth of major folds and thrusts, in the Chartreuse district of the French Subalpine thrust belt, shows that each thrust evolved through a phase of distributed faulting, major thrust propagation and displacement, followed by distributed shear modification of the hanging-wall fold. Microstructural studies suggest that the distributed faulting phases, early and late in the history, were characterized by strain rates limited by diffusive mass transfer processes ( c . 10^-15-10^-16 s^-1). Faulting whose rate is limited by DMT is too slow on its own to accommodate the regional time-averaged shortening rates for the thrust belt as a whole, implying that the slow thrusts operated in tandem with those major, fast thrusts where deformation was primarily cataclastic. Consequently each thrust anticline experienced a displacement rate cycle and an array of thrust anticlines must amplify simultaneously. These interpretations raise important issues for the dynamics of fault populations, the evolution of thrust wedges and the history of fluid migration in thrust belts.     

塔里木盆地南部玛东早古生代褶皱-冲断带

玛东褶皱-冲断带位于塔里木盆地南部,走向NE-SW,由NW向SE方向冲断。褶皱冲断带发育于寒武-奥陶系,以中寒武统膏-盐层为主滑脱面。中志留统及其以上地层不整合于褶皱冲断带之上。它是世界上保存最好的早古生代褶皱冲断带之一。根据卷入变形最新地层、不整合于褶皱-冲断带之上的最老地层和上奥陶统上部的生长地层,玛东褶皱-冲断带的变形时间为晚奥陶世-早志留世。玛东褶皱-冲断带与其东南侧的塘南褶皱-冲断带同为塔里木盆地南缘早古生代前陆褶皱-冲断带的组成部分,塘南褶皱-冲断带是该早古生代前陆褶皱-冲断带主体的残余,其向NW的主冲断方向代表该前陆褶皱-冲断带的主冲断方向;玛东褶皱-冲断带是该早古生代前陆褶皱-冲断带的前锋,其向SE的冲断具有反冲性质。它们是昆仑早古生代造山作用的重要记录,也是昆仑早古生代碰撞造山带的组成部分,现今保存最好的部分。     

鄂西弧形构造变形特征及成因机制

对川东—湘鄂西断褶带内鄂西地区的弧形构造,从构造剖面特征、叠加褶皱样式和断裂性质入手进行几何学和运动学分析。结果发现鄂西弧形构造具有多期变形特征:早期普遍为北东东向的直线型褶皱,随着弧形带扩展,在东、西两翼分别发育右行和左行的逆冲—走滑断裂,同时分别形成北北东向和北西西向的弧形褶皱。晚期弧形带中部发育北北东向构造并叠加改造了早期北东东和北西西向褶皱,同时在黄陵背斜以西还发育交切早期构造的北北西向仙女山右行走滑断裂。根据弧形带扩展的几何学—运动学分类原则,并结合前人的古地磁研究结果,推测鄂西弧形构造应属于构造弯曲形成的弯曲弧。区域滑脱层和黄陵隆起阻挡可能是控制弧形样式的主要原因。区域滑脱层控制了拆离滑脱褶皱的构造样式; 黄陵基底隆起的阻挡作用使弧形带东翼进一步弯曲变形,并导致了构造应力场方向发生改变,造成了晚期北北东向与早期北东东向构造的叠加。由此恢复的鄂西弧形构造变形过程对于揭示川东—湘鄂西断褶带构造演化具有重要的指示意义。     

天山南麓库车晚新生代褶皱-冲断带

库车褶皱冲断带位于天山南麓,由近东西走向的多条构造带组成。三叠系暗色泥岩、侏罗系煤层、古近系库姆格列木组膏盐层和新近系吉迪克组膏盐层构成库车褶皱冲断带的区域性主滑脱面。褶皱冲断带底面由北向南逐渐抬高。褶皱冲断带主体发育盖层滑脱-冲断构造(薄皮构造),基底卷入型冲断构造(厚皮构造)见于北缘的根带。新生界膏盐层之上构造变形以滑脱褶皱为特色,之下以冲断构造为特色。库车褶皱冲断带是印度-亚洲碰撞远程效应下,(南)天山晚新生代造山过程的产物。褶皱冲断带构造变形的动力来源主要是造山楔向塔里木盆地推进所形成的挤压构造应力。褶皱冲断带构造变形的起始时间为约23Ma,构造变形具有阶段式加速的特点,已经识别出约23Ma、约10Ma、5~2Ma和1~0Ma共4个变形加速期。褶皱冲断带的演化过程为前展式,褶皱冲断带前锋向南推进的同时,后缘持续变形。     

龙门山北段矿山梁构造解析及其油气勘探

矿山梁构造是龙门山冲断带北段典型的前锋构造之一,经历了晚三叠世和新生代两期构造挤压变形。矿山梁构造几何学上表现为一个双重构造:浅层是一个晚三叠世形成的断层转折褶皱;深层则是在新生代形成的三个逆冲岩片叠置所构成的隐伏堆垛背斜构造。深部构造的发育改造了上覆晚三叠世形成的浅层构造。矿山梁构造的有利勘探部位是深部的隐伏冲断构造,尤其是新生代构造变形中最早形成的构造岩片即岩片1,但该构造能否具有较好的油气潜力则取决于深部构造顶部滑脱层的封堵能力。分析认为新生代形成的隐伏冲断构造是龙门山冲断带前锋带中油气勘探的新领域。     

库车前陆褶皱冲断带前缘滑脱层内部变形特征

古近系库姆格列木组和新近系吉迪克组膏盐层构成了库车前陆褶皱冲断带的区域滑脱层。在褶皱冲断带前缘,膏盐层发生塑性流动,其内部形成多种构造样式。根据野外考察、地震剖面解释和钻井资料识别出的膏盐层内部构造变形样式主要包括盐枕、盐墙、盐推覆、鱼尾构造、盐焊接(断层焊接)、盐缩颈、透镜状增厚和盐垛等盐构造。盐构造在形成时间上具有一定的演化序列,库车前陆褶皱冲断带总体表现为由北向南迁移,前缘秋里塔格构造带则是从西往东迁移,盐推覆、盐焊接、盐枕等构造形成时间较早,盐墙形成较晚,东秋地区的盐构造形成时间整体较西段和中段晚,规模也较小。     

冲断构造带深层变形的空间分布规律——以库车坳陷克拉苏构造带为例

传统上认为前陆冲断带内部的背斜构造具有"成排成带分段"的特征,在表观认识和宏观尺度上讲,容易理解这一特征,并且通过"成排成带分段"的解剖,直接为含油气区带评价和地震解释方案的落实提供指导作用。随着前陆冲断带深层结构的精细解剖和三维空间内构造变形的准确刻画,发现前陆冲断带深层构造变形的分布并非成排成带分段的特征,褶皱构造的发育与分布明显受前陆冲断构造位移量及各个断层位移量的大小所控制,各个断层控制的逆冲岩席在垂向上相互叠置、侧向上交叉对接、走向上错落有致, 3D立体空间内由多个次级弧形体组成鳞片状分布。本文以中国天然气勘探最为成功、勘探资料最为详实的库车坳陷克拉苏构造带为例,通过地震剖面精细构造解释,揭示出构造变形的运动学特征及其构造位移量在传播过程中的分异和转换,进而控制冲断带内部构造岩席的生长发育和空间展布特征,并在3D立体空间内揭示冲断岩席受构造位移量的控制而成鳞片状分布的规律,控制这一分布规律的主控因素是冲断构造位移量与冲断岩席长度之间定量的几何关系。这一认识提升了油气藏评价和构造圈闭描述的精度。     

The impact of cover rock rheology on the style of folding in the Zagros fold-thrust belt

The present day morphology of the Zagros fold-thrust belt is dominated by magnificent exposures of NW–SE trending folds. These folds differ in their size and geometry and these differences are related mainly to the rheological profile of the cover rock. The cover rock succession of the Zagros consists of a sequence of competent and incompetent units which vary both along and across the belt. Field based study combined with the use of satellite images reveals that the thickness and facies distribution of the cover rock succession has a significant impact on the style of deformation. During the shortening linked to the current convergence of the Arabian and Iranian plates, the incompetent units act as detachment horizons which localise thrusting and which act as décollement above which detachment folds form. In addition, where these incompetent units are thick (e.g.> 1 km), they allow the deformation above and below them to become completely decoupled enabling disharmonic folding to occur. As a result the folds above and below the incompetent units in the central part of the Zagros Folded Belt, have significantly different geometries and wavelengths. As the Zagros folds host the majority of the hydrocarbon reserves in Iran and Iraq, an understanding of the processes that influence their geometry and spatial organization at different levels in the cover rock is crucial for the future exploration in the region.     

Plate collision and paleostress trajectories in a fold-thrust belt: The foothills of Taiwan

Field analyses of compressional faulting and folding in the Foothills of western Taiwan enable us to reconstruct paleostress trajectories over a large area and to establish the relative chronology of tectonic events. Two main compressional events have contributed to the present structure of the fold-thrust belt. Stratigraphic data show that these events are Plio-Pliocene in age. Older normal faulting indicates NNW-SSE extension across the Chinesse passive continental margin during the Neogene. The two main compressional events of the Taiwan collision correspond to similar fan-shaped distributions of maximum compressive stress trajectories, with a counterclockwise shift of 30°–50° between the two events. Using the relationship between recent stress trajectories and the direction of recent plate motion as a guide, we reconstruct the direction of plate convergence for the older event. We suspect that the relative motion Philippine Sea plate-Eurasia has rotated counterclockwise of at least 35°–45° in Taiwan during collision. This conclusion is in agreement with independent plate tectonic reconstructions. Several problems provide objectives to further tectonic and paleomagnetic studies, including the duration and diachronism of compressional events as well as possible clockwise rotation of northernmost Taiwan.     

江南造山带北部早中生代岳阳—赤壁断褶带构造特征及变形机制研究

早中生代(晚印支-早燕山期)岳阳-赤壁断褶带位于江南造山带与中扬子前陆盆地交界地带.作者对该构造带进行了地表地质调查,以此为基础探讨了构造剖面结构及构造变形动力机制.岳阳-赤壁断褶带自南而北可分为岳阳-临湘基底滑脱-逆冲带,桃花泉-肖家湾盖层滑脱褶皱带,以及赤壁-嘉鱼前陆盆地断-褶-盆构造带.岳阳-临湘基底滑脱-逆冲带自南而北依次有郭镇向斜、官山背斜、临湘倒转向斜和聂市背斜,组成隔槽式褶皱组合.褶皱轴面多向南倾,褶皱变形面为南华系盖层与冷家溪群褶皱基底间的角度不整合面和顺界面的滑脱断裂面.桃花泉-肖家湾盖层滑脱褶皱带主要发育轴面南倾倒转褶皱,褶皱波长较小,卷入地层为南华系-志留系以及上石炭统-中三叠统沉积盖层.赤壁-嘉鱼前陆盆地断-褶-盆构造带以南倾蒲圻断裂(江南断裂)为南部边界,发育T3-J2前陆盆地沉积,带内褶皱与断裂卷入地层包括沉积盖层以及T3-J2地层:南部断裂与褶皱轴面南倾.北部轴面近直立.自南西至北东,研究区内构造线走向由EW向渐变为NEE-NE向.上述构造分带及变形特征反映出自南向北的运动指向,表明岳阳-赤壁断褶带具前陆冲断带构造性质.从断裂相关褶皱理论出发,以地表构造特征为依据,厘定了岳阳-赤壁地质剖面结构并进行了变形动力机制分析,认识如下:①自南而北、自下而上的多个滑脱层及其间的南倾逆断裂或断坡(主要为江南断裂)组成近似台阶状的逆冲断裂系统,从总体上控制了构造块体的滑移、逆冲以及相应的构造格架或变形分区.②郭镇向斜为基底滑脱褶皱,官山背斜具滑脱褶皱和断裂传播褶皱双重成因,聂市背斜为断裂转折褶皱;临湘向斜为受两侧背斜控制的被动向斜,由于弯滑褶皱作用在其两翼沿不整合界面形成滑脱断裂.③岳阳-临湘基底滑脱-逆冲带隔槽式褶皱的形成主要受控于褶皱基底的滑脱和基底整体的水平压缩,其形成机制类似于肿缩式褶皱.最后讨论认为湘东北-鄂东南地区不存在大规模、长距离的逆冲推覆构造.     

塔里木盆地中南部麻扎塔格逆冲-褶皱带变形特征及其意义

麻扎塔格地区地层、地貌及构造变形特征的研究,对于认识塔里木盆地新生代构造演化过程、塔里木—西昆仑的盆山耦合关系、新构造运动对塔里木油气资源分布的影响以及塔克拉玛干沙漠的气候、环境变化都具有重要意义。本文通过卫星照片解译、野外变形观察、剖面实测、地球物理资料解释等手段,对该地区晚新生代的构造特征进行了研究,确定了麻扎塔格构造带为典型的逆冲—褶皱带,并探讨了麻扎塔格逆冲—褶皱带的构造指向、活动时限、隆升速率及缩短速率、东西方向的延伸等问题,取得如下认识： 1）麻扎塔格逆冲—褶皱带为西昆仑山前陆褶皱冲断带的前缘部位,和田河气田就是处在逆冲前锋背斜顶部,晚新生代变形作用已明显地改造了塔里木盆地南部及中部的古生代和中生代构造,并促成了和田河气田的形成; 2）麻扎塔格山在中新世末（约7 Ma）和中更新世（约780 ka BP.）经历了两次构造隆升,后一次形成了麻扎塔格逆冲—褶皱带和麻扎塔格山现今的地貌特征;3）估算出麻扎塔格逆冲—褶皱带中更新世以来的隆升速率约为0.26～0.4 mm/a,缩短速率约为0.9 mm/a;4）认为麻扎塔格逆冲—褶皱带向西应与同属西昆仑山前褶皱—冲断带前缘的喀什背斜相连,东端的突然消失可能是由于东段和田河附近存在北东—南西向的走滑断层造成。     

塔里木盆地中南部麻扎塔格逆冲—褶皱带变形特征及其意义

麻扎塔格地区地层、地貌及构造变形特征的研究,对于认识塔里木盆地新生代构造演化过程、塔里木—西昆仑的盆山耦合关系、新构造运动对塔里木油气资源分布的影响以及塔克拉玛干沙漠的气候、环境变化都具有重要意义。本文通过卫星照片解译、野外变形观察、剖面实测、地球物理资料解释等手段,对该地区晚新生代的构造特征进行了研究,确定了麻扎塔格构造带为典型的逆冲—褶皱带,并探讨了麻扎塔格逆冲—褶皱带的构造指向、活动时限、隆升速率及缩短速率、东西方向的延伸等问题,取得如下认识:1)麻扎塔格逆冲—褶皱带为西昆仑山前陆褶皱冲断带的前缘部位,和田河气田就是处在逆冲前锋背斜顶部,晚新生代变形作用已明显地改造了塔里木盆地南部及中部的古生代和中生代构造,并促成了和田河气田的形成;2)麻扎塔格山在中新世末(约7 Ma)和中更新世(约780 ka B.P.)经历了两次构造隆升,后一次形成了麻扎塔格逆冲—褶皱带和麻扎塔格山现今的地貌特征;3)估算出麻扎塔格逆冲—褶皱带中更新世以来的隆升速率约为0.26～0.4 mm/a,缩短速率约为0.9 mm/a;4)认为麻扎塔格逆冲—褶皱带向西应与同属西昆仑山前褶皱—冲断带前缘的喀什背斜相连,东端的突然消失可能是由于东段和田河附近存在北东—南西向的走滑断层造成。     

地层证据--对大别造山带汇聚历史的制约

大别造山带的汇聚演化历史一直存在不同的认识,来自扬子陆块和华北陆块显生宙以来的地层记录以及北淮阳地区的地层记录可能为两个陆块的汇聚模式提供制约。通过对扬子陆块与华北陆块显生宙以来岩相古地理进行比较,其中3个阶段相似, 2个阶段差别很大。以浊积岩发育作为俯冲阶段的标志,磨拉石建造出现作为闭合的标志,显生宙以来,大别造山带曾经历了两次俯冲和两次汇聚,俯冲时间分别是晚奥陶世—早志留世和早三叠世,汇聚的时间分别为中 晚泥盆世和中三叠世,早期的汇聚具有软碰撞特征,以上认知得到了北淮阳地区地层、古生物和沉积记录的支持,同时也与大别山造山带榴辉岩的同位素年龄数据基本吻合。高压 超高压变质岩在晚三叠世处于快速折返阶段,早侏罗世以前到达地表,其平均折返隆升速率为39～66mm/a。     

地层证据——对大别造山带汇聚历史的制约

大别造山带的汇聚演化历史一直存在不同的认识,来自扬子陆块和华北陆块显生宙以来的地层记录以及北淮阳地区的地层记录可能为两个陆块的汇聚模式提供制约。通过对扬子陆块与华北陆块显生宙以来岩相古地理进行比较,其中3个阶段相似, 2个阶段差别很大。以浊积岩发育作为俯冲阶段的标志,磨拉石建造出现作为闭合的标志,显生宙以来,大别造山带曾经历了两次俯冲和两次汇聚,俯冲时间分别是晚奥陶世—早志留世和早三叠世,汇聚的时间分别为中 晚泥盆世和中三叠世,早期的汇聚具有软碰撞特征,以上认知得到了北淮阳地区地层、古生物和沉积记录的支持,同时也与大别山造山带榴辉岩的同位素年龄数据基本吻合。高压 超高压变质岩在晚三叠世处于快速折返阶段,早侏罗世以前到达地表,其平均折返隆升速率为39～66mm/a。     

南天山褶皱冲断带西段变形空间差异性及控制因素

新生代早期印度板块与欧亚板块持续碰撞汇聚导致欧亚板块内部发生大规模的陆内变形,天山造山带再次隆升,并向塔里木盆地大规模逆掩推覆,形成了现今南天山褶皱冲断带,其变形表现出明显的空间差异性。本文以南天山褶皱冲断带西段为研究对象,通过对不同构造带的地震剖面解释、运用平衡剖面技术恢复出各演化阶段发育过程并计算出相应的变形量,分析本区构造带的空间差异性及其控制因素。通过分析认为南天山褶皱冲断带西段可以进一步划分为巴什布拉克构造段,乌恰-阿图什-喀什构造段和柯坪西缘构造段。其中,巴什布拉克构造段变形特征主要呈一系列对冲构造和背驮盆地样式。乌恰-阿图什-喀什构造段变形特征表现为深、浅两个层次:深部发育堆垛构造和构造楔,浅部发育断层传播褶皱和逆冲断层改造的褶皱带。柯坪西缘构造段变形更加强烈,也表现为深、浅两个层次:深部发育堆垛构造,堆垛程度更大,浅部也发育断层传播褶皱和逆冲断层改造的褶皱带以及反冲断层系。结合该研究区的地质概况进一步分析,本文认为南天山褶皱冲断带西段构造变形的差异性可能与新生代以来帕米尔块体向北推进、塔拉斯-费尔干纳右行走滑断裂的活动、先存断裂的活化与韧性滑脱层的影响有关。     

秦岭区前寒武纪构造格局与演化问题探讨

秦岭造山带中夹持大量前寒武纪岩层、地块,筛除后期改造与变位,昨原,它们复杂而多样,不仅是秦岭造山带研究的基础,也是研究早期中国大陆壳形成演化的关键地带。现有的地质、地球化学研究,揭示秦岭区早前寒武纪具非统一多块分离拼合特征,晚期已成为早期化南块的边缘带。中新元古代相应于Ｇｒｅｎｖｉｌｌｉａｎ造山事件和Ｒｏｄｉｎｉａ超大陆全球性构造时期,秦岭区从扩张裂谷系与小洋盆兼杂并存的垂向加积增生构造体制向侧向     

Evolution of a fold-thrust belt deforming a unit with pre-existing linear asperities: Insights from analog models

Heterogeneity, whether geometric or rheologic, in crustal material undergoing compression affects the geometry of the structures produced. This study documents the thrust fault geometries produced when discrete linear asperities are introduced into an analog model, scaled to represent bulk upper crustal properties, and compressed. Varying obliquities of the asperities are used, relative to the imposed compression, and the resultant development of thrust fault traces and branch lines in map view is tracked. Once the model runs are completed, cross-sections are created and analyzed. The models show that asperities confined to the base layer promote the clustering of branch lines in the surface thrusts. Strong clustering in branch lines is also noted where several asperities are in close proximity or cross. Slight reverse-sense reactivation of asperities cut through the sedimentary sequence is noted in cross-section, where the asperity and the subsequent thrust belt interact. The model results are comparable to the situation in the Dinaric Alps, where pre-existing faults to the SW of the NE Adriatic Fault Zone contribute to the clustering of branch lines developed in the surface fold-thrust belt. These results can therefore be used to evaluate the evolution of other basement-involved fold-thrust belts worldwide.