山西高原北部地壳上地幔地震波速结构与深部构造

对自河北文安经山西大同至内蒙古岱海的宽角反射／折射地震剖面资料进行了详细的研究。结果表明，地壳厚度由太行山山前地带的３６．０ｋｍ向山西高原增厚至４４．０ｋｍ。在太行山山前基底断裂、紫荆关断裂的下方和大同盆地的东侧存在着延伸至莫霍面的断裂带；太行山隆起区上地幔顶部的速度偏高，太行山山前地带和大同震区上地壳的下部有强烈的速度反转，大同地震与这里的异常的壳幔构造有关，太行山山前地带存在着发生潜在地震的深部构造条件     

龙门山断裂带中段深地震宽角反射/折射剖面研究

射线追踪方法是研究地震波在横向非均匀地壳介质中传播的重要方法.本文推导了理论走时对网格化节点速度的偏导数公式,提出了针对深地震宽角反射/折射剖面数据反演的联合迭代法,并使用该方法对横跨龙门山断裂带中段的一条深地震宽角反射/折射剖面进行了反演和解释.首先,对每一炮的观测数据进行一维反演,在此基础上插值出一个粗略的二维速度模型;然后,使用射线追踪方法计算理论走时,再根据理论走时与观测走时的拟合程度对二维模型进行调整,以获得更加接近实际的二维速度模型;最后,利用联合迭代法对观测走时进行反演,经反复迭代使所有接收点理论走时与实测走时的残差平方和最小,最终获取该剖面的二维地壳速度结构.反演结果表明:测线东段的沉积盖层明显厚于中段褶皱带和西部高原,中部褶皱带部分地区出现基岩裸露;构造转换带两侧的地层分界面近于水平层状分布,其西侧的中、下地壳内各存在一个层间速度间断面;构造转换带内存在薄厚不等的低速层,自西向东有增厚趋势.此外,龙门山断裂带的3条主断裂向下深切结晶基底,这是由于西部松潘—甘孜地块自西向东运动,受到刚性扬子地块的阻挡,沿铲式断裂向上爬升所致;而在断层上盘距地表约15 km深处出现的最大剪应力极值区,正是发生汶川M_S8.0地震的震源位置.      

利用地震走时反演阿尼玛卿缝合带东段及两侧基底结构

对11炮宽角地震反射/折射的Pg波走时数据进行了反演,结果表明:阿尼玛卿缝合带东段基底速度结构整体呈低速带分布,两侧的速度分布相对均匀;缝合带内基底界面剧烈下凹,最深达5.5 km,不存在稳定的基底界面;松潘-甘孜微块体基底界面整体埋深达3.5 km,相对平坦,其中部略微下凹;从缝合带过渡到西秦岭褶皱带,基底界面急剧抬升至1.8 km,之后迅速下降至4.7 km,然后趋于平坦;缝合带的地壳变形存在挤压和走滑两种形式,在缝合带及邻近地区,上部地壳物质曾有过向北方向逃逸的迹象.     

银川盆地深地震断层的三维透射成像

为了获得三维地震透射成像技术在活断层探测中的有效性和应用价值的评价,在银川盆地中北部布设了一个三维地震透射台阵,利用该台阵获得的基底初至折射波和莫霍界面反射波资料,采用有限差分反演、时间项反演和连续速度模型反演方法,对台阵区域基底及上地壳结构进行了分析.结果表明：研究区基底呈东西浅、中部深的界面形态,且西陡东缓,最深处大致位于芦花台至西大滩一带,埋深达7 km.芦花台断层、银川—平罗断层、黄河断层在研究区内均表现为北北东走向的速度差异条带,且断层两侧基底及沉积界面埋深存在显著变化.芦花台断层东倾,倾角较陡,延伸至研究区基底之下;银川—平罗断层倾向西,是一条超基底的隐伏断层;黄河断层西倾,延伸深度超过研究区基底.本探测结果证明,初至折射波与莫霍面反射波探测相结合的三维地震透射台阵技术能够给出研究区上地壳三维细结构图像,不仅可以揭示主要断裂的展布位置、浅部空间形态和特征,而且可以揭示断裂向基底之下的延伸状况.     

Velocity structure and active fault of Yanyuan-Mabian seismic zone—The result of high-resolution seismic refraction experiment

The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180–240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the basement. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area. Supported by the National Basic Research Program of China (Grant No. 2004CB428400)     

UPPER CRUSTAL VELOCITY STRUCTURE AND CONSTRAINING FAULT INTERPRETATION FROM SHUNYI-TANGGU REFRACTION EXPERIMENT DATA

The urban active fault survey is of great significance to improve the development and utilization of urban underground space, the urban resilience, the regional seismic reference modeling, and the natural hazard prevention. The Beijing-Tianjin metropolitan region with the densest population is one of the most developed and most important urban groups, located at the northeastern North China plain. There are several fault systems crossing and converging in this region, and most of the faults are buried. The tectonic setting of the faults is complex from shallow to deep. There are frequent historical earthquakes in this area, which results in higher earthquake risk and geological hazards. There are two seismicity active belts in this area. One is the NE directed earthquake belt located at the east part of the profile in northern Ninghai near the Tangshan earthquake region. The other is located in the Beijing plain in the northwest of the profile and near the southern end of Yanshan fold belt, where the 1679 M8.0 Sanhe-Pinggu earthquake occurred, the largest historical earthquake of this area. Besides, there are some small earthquake activities related to the Xiadian Fault and the Cangdong Fault at the central part of the profile.
The seismic refraction experiment is an efficient approach for urban active fault survey, especially in large- and medium-size cities. This method was widely applied to the urban hazard assessment of Los Angeles. We applied a regularized tomography method to modeling the upper crustal velocity structure from the high-resolution seismic refraction profile data which is across the Beijing-Tianjin metropolitan region. This seismic refraction profile, with 185km in length, 18 chemical explosive shots and 500m observation space, is the profile with densest seismic acquisition in the Beijing-Tianjin metropolitan region up to now. We used the trial-error method to optimize the starting velocity model for the first-arrival traveltime inversion. The multiple scale checker board tests were applied to the tomographic result assessment, which is a non-linear method to quantitatively estimate the inversion results. The resolution of the tomographic model is 2km to 4km through the ray-path coverage when the threshold value is 0.5 and is 4km to 7km through the ray-path coverage when the threshold value is 0.7. The tomographic model reveals a very thick sediment cover on the crystalline basement beneath the Beijing-Tianjin metropolitan region. The P wave velocity of near surface is 1.6km/s. The thickest sediment cover area locates in the Huanghua sag and the Wuqing sag with a thickness of 8km, and the thinnest area is located at the Beijing sag with a thickness of 2km. The thickness of the sediment cover is 4km and 5km in the Cangxian uplift and the Dacang sag, respectively. The depth of crystalline basement and the tectonic features of the geological subunits are related to the extension and rift movement since the Cenozoic, which is the dynamics of formation of the giant basins.
It is difficult to identify a buried fault system, for a tomographic regularization process includes velocity smoothing, and limited by the seismic reflection imaging method, it is more difficult to image the steep fault. Velocity and seismic phase variations usually provide important references that describe the geometry of the faults where there are velocity differences between the two sides of fault. In this paper, we analyzed the structural features of the faults with big velocity difference between the two sides of the fault system using the velocity difference revealed by tomography and the lateral seismic variations in seismograms, and constrained the geometry of the major faults in the study region from near surface to upper crust. Both the Baodi Fault and the Xiadian Fault are very steep with clear velocity difference between their two sides. The seismic refraction phases and the tomographic model indicate that they both cut the crystalline basement and extend to 12km deep. The Baodi Fault is the boundary between the Dachang sag and the Wuqing sag. The Xiadian Fault is a listric fault and a boundary between the Tongxian uplift and the Dachang sag. The tomographic model and the earthquake locations show that the near-vertical Shunyi-Liangxiang Fault, with a certain amount of velocity difference between its two sides, cuts the crystalline basement, and the seismicity on the fault is frequent since Cenozoic. The Shunyi-Liangxiang Fault can be identified deep to 20km according to the seismicity hypocenters.
The dense acquisition seismic refraction is a good approach to construct velocity model of the upper crust and helpful to identify the buried faults where there are velocity differences between their two sides. Our results show that the seismic refraction survey is a useful implement which provides comprehensive references for imaging the fault geometry in urban active fault survey.     

华北克拉通东部地壳与地幔盖层结构——长观测距深地震测深剖面结果

利用文登—阿拉善左旗长观测距地震宽角反射/折射剖面东段资料,辩识出4组地壳震相和3组地幔盖层震相.采用二维射线追踪走时反演和正演拟合交替计算方法,得到了包括鲁东隆起和华北裂陷盆地在内的地壳和地幔盖层二维速度结构.研究结果表明:华北裂陷盆地基底深达6km以上,研究区壳内界面C1埋深约15km,C2界面深约25km,Moho面平均埋深约35km.上地壳速度6.0~6.1km·s-1,且横向变化较大;中地壳速度相对均匀约为6.2~6.4km·s-1;下地壳速度为6.5~7.0km·s-1,速度梯度较大.地壳平均速度与隆起和坳陷构造相关.研究区岩石圈底界面一般为75~80km,西端接近太行隆起构造时深至90km左右,向西呈明显加深趋势,地壳厚度呈现相同的增厚特征.地幔盖层上部速度8.0~8.2km·s-1,具明显正梯度特征.岩石圈平均速度在郯庐断裂带附近显著偏低.PmP和PLP震相存在不同程度的复杂性,意味着在本地区Moho界面和岩石圈界面有较为复杂的结构,可能具有一定厚度或过渡带性质.结合其他研究结果认为,地幔盖层和下地壳速度梯度、界面性质差异与华北克拉通破坏相关,意味着破坏是一个渐变、缓慢和不均匀的过程.郯庐断裂带附近的低速应是其为软弱带的证据.     

Seismic model and geological interpretation of the basement beneath the Doupovské Hory Volcanic Complex (NW Czech Republic)

The Doupovské Hory Volcanic Complex (DHVC) is the best-preserved large volcanic suite of the Cenozoic intraplate volcanism in the Bohemian Massif. However, many uncertainties remain in the geological setting of its basement. In summer 2008, two seismic refraction profiles ran across this area to reveal the depth of the volcanic rocks and the underlying geological structure.     

Processing and preliminary interpretation of noisy high-resolution seismic reflection/refraction data across the active Ostler Fault zone,South Island,New Zealand

In an attempt to understand the structure of active faults as they emerge from bedrock into shallow semi-consolidated and unconsolidated sediments, we have recorded a comprehensive high-resolution seismic reflection/refraction data set across the Ostler Fault zone on the central South Island of New Zealand. This fault zone, which absorbs 1–2 mm/yr of compression associated with oblique convergence of the Pacific and Australian tectonic plates, consists of a series of surface-rupturing N–S trending, west-dipping reverse faults that offset a thick sequence of Quaternary glacial outwash and late Neogene fluvio-lacustrine sediments of the Mackenzie Basin. Our study focuses on a region of the basin where two non-overlapping fault segments are separated by a transfer zone. Deformation in this area is accommodated by offsets on multiple small faults and by folding in their hanging walls. The seismic data with source and receiver spacing of 6 and 3 m and nominal CMP fold of 60 was acquired along twelve 1.2 km long lines orthogonal to fault strike and an additional 1.6 km long tie-line parallel to fault strike. The combination of active deformation and shallow glacial outwash sediments results in particularly complicated seismic data, such that application of relatively standard processing schemes yields only poor quality images. We have designed a pre- and post-stack reflection/refraction processing scheme that focuses on minimising random and source-generated noise, determining appropriate static corrections and resolving contrasting reflection dips. Application of this processing scheme to the Ostler Fault data provides critical information on fault geometry and offset and on sedimentary structures from the surface to ～ 800 m depth. Our preliminary interpretation of one of the lines includes complex deformation structures with folding and multiple subsidiary fault splays on either side of a ～ 50° west-dipping primary fault plane.     

Velocity structure and active fault of Yanyuan-Mabian seismic zone―The result of high-resolution seismic refraction experiment

The authors processed the seismic refraction Pg-wave travel time data with finite difference tomography method and revealed velocity structure of the upper crust on active block boundaries and deep features of the active faults in western Sichuan Province. The following are the results of our investigation. The upper crust of Yanyuan basin and the Houlong Mountains consists of the superficial low-velocity layer and the deep uniform high-velocity layer, and between the two layers, there is a distinct, and gently west-dipping structural plane. Between model coordinates 180-240 km, P-wave velocity distribution features steeply inclined strip-like structure with strongly non-uniform high and low velocities alternately. Xichang Mesozoic basin between 240 and 300 km consists of a thick low-velocity upper layer and a high-velocity lower layer, where lateral and vertical velocity variations are very strong and the interface between the two layers fluctuates a lot. The Daliang Mountains to the east of the 300 km coordinate is a non-uniform high-velocity zone, with a superficial velocity of approximately 5 km/s. From 130 to 150 km and from 280 to 310 km, there are extremely distinct deep anomalous high-velocity bodies, which are supposed to be related with Permian magmatic activity. The Yanyuan nappe structure is composed of the superficial low-velocity nappe, the gently west-dipping detachment surface and the deep high-velocity basement, with Jinhe-Qinghe fault zone as the nappe front. Mopanshan fault is a west-dipping low-velocity zone, which extends to the top surface of the basement. Anninghe fault and Zemuhe fault are east-dipping, tabular-like, and low-velocity zones, which extend deep into the base-ment. At a great depth, Daliangshan fault separates into two segments, which are represented by drastic variation of velocity structures in a narrow strip: the west segment dips westward and the east segment dips eastward, both stretching into the basement. The east margin fault of Xichang Mesozoic basin features a strong velocity gradient zone, dipping southwestward and stretching to the top surface of the basement. The west-dipping, tabular-like, and low-velocity zone at the easternmost segment of the profile is a branch of Mabian fault, but the reliability of the supposition still needs to be confirmed by further study. Anninghe, Zemuhe and Daliangshan faults are large active faults stretching deep into the basement, which dominate strong seismic activities of the area.     

川滇活动地块东南边界基底结构——盐源-西昌-昭觉-马湖深地震测深剖面结果

在川滇活动地块东南边界区域完成了盐源-西昌-昭觉-马湖深地震宽角反射/折射探测剖面.利用该剖面获得的Pg初至折射波走时,采用走时特征分析、有限差分反演、时间项反演等方法,获得了沿剖面的基底P波速度结构和基底界面构造图像.结果表明,研究区基底结构呈现强烈的非均匀性,不同构造区显示出不同的地壳变形特征.盐源盆地盖层表现为推...     

中国大陆地壳与上地幔精细结构探测十条第一剖面和其作用与科学意义

地球内部物理学和地球动力学在地球科学研究领域里占有重要地位.为了研究和探索我国大陆不同大地构造单元和板内特异块体与其界带的深部介质属性、结构和深层物理-力学过程,已在我国最先构思、设计、布署并实施了十条人工源深部地震探测剖面.沿这十条第一剖面进行了高精度的地震反射、宽角反射和折射波场观测,进行了数据采集,获得了深部高分辨率的信息.通过数据处理和反演求得了各剖面辖区的沉积建造、结晶基底、地壳与土地幔的差异和层、块精细速度结构,发现、研究和提出了一系列的重要科学问题并取得了一系列新认识.为研究成山、成盆、成岩、成矿、成灾,圈层耦合和深化认识地球本体与动力学响应打下了坚实的基础,明确指出了其深入研究的内涵和发展导向.     

琼西北地区的基底速度图象

利用人工地震测深纵剖面和非纵剖面的资料,对琼西北地区P_g波的走时进行了层析反演,对比了代数重建法和同时迭代重建法的效果.综合了纵剖面的模型后,在三维弯曲界面上重建了基底速度图象,探讨了用射线椭圆评价分辨的途径. 层析成象结果给出了许多有价值的信息,揭示琼西北的结晶基底存在三条北东向断裂和两条北西向断裂,后者是继承性的活动断裂,控制着新生代次级断块的发展与火山活动.地表所推断的东西向王五-文教深大断裂,在该处只呈断续隐伏状显示.该区的基底存在儋县、临高和光村三个高速区,主要反映着基性岩体或花岗侵入体.基底整体性最好的是在儋县-王五地区,破碎程度最严重的是在王五-中和-光村以西的地区.     

Seismic stratigraphy and sedimentation history of the East Mariana Basin,western Pacific

An interpretation of the seismic stratigraphy and sedimentation history of the East Mariana Basin has been made using recently collected seismic reflection and refraction data. This Mesozoic(?) age basin, between the Marshall Islands and the Mariana Trench, is subdivided into three regions. The central region with about 1000 m of sediment probably records Jurassic to Late Cretaceous sedimentation of a pelagic biogenic and clay-rich section overlain by a thick section of mainly Cenozoic carbonates shed from nearby volcanic platforms. A western region is characterized by a thinner sediment cover and a shallower acoustic basement with a similar sedimentation history except that the upper section is thinner as a consequence of fewer nearby volcanic highs. Extensive Late Cretaceous mid-plate volcanics apparently masks the lower section and forms acoustic basement. The shallower eastern region (east of 157.5°E) contains WNW-trending ridges which may be either fracture zones or high-amplitude abyssal hills. The sedimentation appears controlled by the same factors as in the other regions but the area was bypassed by most Cenozoic basin-filling turbidites because of its elevation.The isostatistically corrected basement depths between the three regions suggest that the crust in the east may be substantially younger than in the rest of the East Mariana Basin, perhaps Cretaceous in age. This requires the existence of a tectonic boundary within the basin.     

海原构造区及其周缘上部地壳结构研究

基于甘肃省夏河县—陕西省靖边县剖面的8次人工地震初至波数据, 利用有限差分走时方法反演得到了沿该剖面长约650 km的上部地壳速度结构和结晶基底的深度分布． 反演结果显示: 海原构造区西侧的西秦岭—祁连山褶皱区上部地壳的横向非均匀性明显, 基底深度从1 km到5 km不等, 反映了褶皱区改造变形强烈的构造特征; 其东侧的鄂尔多斯盆地基底深度约为5—6 km, 其速度均匀、 稳定, 上地壳呈弱速度梯度特征; 海原构造区及海原弧形断裂带附近上部地壳的破坏变形最严重, 区内横向高低速相间分布． 综上可知, 海原构造区东西两侧上地壳结构的显著差异揭示了其结构复杂性的成因及其与地震活动性的关系．      

利用地震走时层析成像方法确定西昌地区断裂带深部几何形态

断裂深部产状和空间几何关系是研究地壳运动变形、动力作用及其地表响应的基础,也是模拟发震断裂与强震关系的基础。为了研究川西南地区强震活动与安宁河、则木河和金河断裂的关系,对盐源-西昌-雷波高分辨地震折射剖面初至Pg波走时和断层面反射波走时进行模拟,获得了川滇活动地块东边界带安宁河、则木河和金河断裂的深部形态。结果表明:在上地壳内,安宁河断裂和则木河断裂东倾32°～35°,其速度结构为舌状低速带,二者规模较大,延伸到了基底。金河断裂东倾约30°,向下延伸至少5km。     

玉溪-临沧剖面宽角地震探测——红河断裂带及滇南地壳结构研究

云南位于南北地震带南段,地震活动具有频度高、强度大的特点,中小地震几乎遍及云南南部,是中国大陆内部地震活动最强的地区之一.滇南地区跨越多个重要的地质构造单元和多条地震带,其中红河断裂带是跨越该地区的一条大型的走滑断裂带,作为印支地块和华南地块两大地块的分界断裂,对人们认识板块相互运动及其深部动力学背景具有重要意义.中国地震局于2010年启动了"中国地震科学台阵探测--南北地震带南段"项目,在云南省中西部跨越红河断裂带布设一条近东西向的深地震宽角反射/折射探测剖面,本文利用该东西向深地震宽角反射/折射剖面来研究红河断裂带及滇南地区详细的地壳结构及其孕震背景.研究结果表明:沿测线地壳结构呈西薄东厚的特征,以红河断裂带为界,断裂带以西地壳较薄,约34 km,以东地壳加厚至44 km左右;红河断裂带两侧速度结构具有明显的差异,断裂带西侧速度较低,东侧速度明显偏高.由震相特征及获取的地壳结构可以看出,红河断裂带两侧由浅至深速度结构的异常特征说明该古缝合带两侧块体地壳结构岩性的巨大差异性.     

Exploration and Research of Deep Crustal Structures in the Zhangzhou Basin and Its Vicinity

INTRODUCTIONThe Zhangzhou basinislocated onthe southeast coast of Fujian Province .Interms of geotectonicunits ,it lies in the east Fujian volcanic fault-depression zone between the Wuyi-Daiyun mountainupheaval zone and depression zone of Taiwan Straits of the south China block. In terms ofseismotectonics ,it islocatedinthe middle sectionof the southeasterncoastal seismic zone .In history,the area was influenced by repeated destructive earthquakes , and the seismic activity was closely…     

复杂地质结构OBS地震剖面震相识别方法

震相识别对获取深部速度结构至关重要.横穿加瓜海脊的T1测线东段,地形高差达3 km,沉积厚度相差约2 km,沉积基底变化复杂,对海底地震仪（OBS）地震剖面的震相识别增加了难度.本文以该测线东段OBS数据为例,采用地形校正、基底校正、多次波识别、正演模拟、走时投影等多种手段,开展了复杂构造的OBS震相识别研究,获得了测线下方深部速度结构模型.结果表明,采用的方法对复杂地质结构下OBS震相识别是行之有效的,相比传统的方法提供了更多且准确的震相走时信息,获得的速度模型更加可靠.     

加拿大Sudbury地区地壳结构特征──AGT（1992）地震折射波资料初步解释

根据1992年加拿大岩石圈组织的Abitibi－GrenvilleTransect（AGT）实验计划中的高精度地震折射波资料的处理与解释,讨论了Sudbury地区的地壳结构特征对2条纵剖面及2条扇形剖面的地震折射波数据做了正反演计算．此外,应用层析成像技术对地震资料进行了处理根据数值计算结果,明确了该区Moho界面的变化形态并发现了Sudbury结构下部透镜状高速异常体的存在．