Low-latitude “dusty events” vs. high-latitude “icy Heinrich events”

It has been proposed that tropical events could have participated in the triggering of the classic, high-latitude, iceberg-discharge Heinrich events (HE). We explore low-latitude Heinrich events equivalents at high resolution, in a piston core recovered from the tropical north-western African margin. They are characterized by an increase of total dust, lacustrine diatoms and fibrous lacustrine clay minerals. Thus, low-latitude events clearly reflect severe aridity events that occurred over Africa at the Saharan latitudes, probably induced by southward shifts of the Inter Tropical Convergence Zone. At a first approximation, it seems that there is more likely synchronicity between the high-latitude Heinrich Events (HEs) and low-latitude events (LLE), rather than asynchronous behaviours.     

Concepts for diamond exploration in “on/off craton” areas—British Columbia, Canada

The tectonic setting of British Columbia (BC) differs from classic diamond-bearing intracratonic regions such as the Northwest Territories and South Africa. Nevertheless, several diamond occurrences have been reported in BC. It is also known that parts of the province are underlain by Proterozoic and possibly Archean basement. Because the continents of today are composites of fragments of ancient continents, it is possible that some of the regions underlain by old crystalline basement in eastern British Columbia were associated with a deep crustal keel. The keel may have predated the break-up of the early Neoproterozoic supercontinent called Rodinia and was preserved possibly until the Triassic. Some of these old continental fragments may have been displaced relative to their position of origin and dissociated from their keel, or the keel may have since been destroyed. Such fragments represent favourable exploration grounds in terms of the “Diamondiferous Mantle Root” model (DMR model) if they were intersected by kimberlites or lamproites prior to displacement or destruction of their underlying deep keel. Therefore, extrapolation of fragments of the diamond-bearing Precambrian basement from the Northwest Territories or Alberta to BC provides a sufficient reason for initiating reconnaissance indicator mineral surveys. The “Eclogite Subduction Zone” model (ES model) predicts formation of diamonds at lower pressure (i.e., depth) than required by the DMR model in convergent tectonic settings. Although not proven, this model is supported by thermal modeling of cold subduction zones and recent discoveries of diamonds in areas characterized by convergent tectonic settings. If the ES model is correct, then the parts of BC with a geological history similar to today's “cold” subduction zones, such as Honshu (Japan), or to continental collision zones, such as Kokchetav massif (Kazakhstan) and the Dabie–Sulu Terrane (east central China), may be diamondiferous. The terranes where geological evidences suggest an ultrahigh pressure (UHP) metamorphic event followed by rapid tectonic exhumation (which could have prevented complete resorption of diamonds on their journey to the surface) are worth investigating. If UHP rocks were intercepted at depth by syn- or post-subduction diamond elevators, such as kimberlites, lamproites, lamprophyres, nephelinites or other alkali volcanic rocks of deep-seated origin, the diamond potential of the area would be even higher.     

“Traditional” women, “modern” water: Linking gender and commodification in Rajasthan, India

In this paper, I analyze the connections made between women and water in a Rajasthani drinking water supply project as a significant part of drinking water’s commodification. For development policy makers, water progressing from something free to something valued by price is inevitable when moving economies toward modernity and development. My findings indicate that water is not commodified simply by charging money for it, but through a series of discourses and acts that link it to other “modern” objects and give it value. One of these objects is “women”. I argue that through women’s participation activities that link gender and modernity to new responsibilities and increased mobility for village women involving the clean water supply, a “traditional” Rajasthani woman becomes “modern”. Water, in parallel, becomes “new”, “improved” and worth paying for. Women and water resources are further connected through project staff’s efforts to promote latrines by targeting women as their primary users. The research shows that villagers applied their own meanings to latrines, some of which precluded women using them. This paper fills a gap in feminist political ecology, which often overlooks how gender is created through natural resource interventions, by concerning itself with how new meanings of “water” and “women” are mutually constructed through struggles over water use and its commodification. It contributes to critical development geography literatures by demonstrating that women’s participation approaches to natural resource development act as both constraints and opportunities for village constituents. It examines an under-explored area of gender and water research by tracing village-level struggles over meanings of latrines.     

What is A “Method”?

Using a recently published compilation of analytical data on reference samples SY-2, SY-3 and MRG-1 as an example, a case is presented in favor of more precise terminology in describing analytical methods used in reporting data in collaborative programs. The technique of final measurement in a particular method is often less important than earlier operations, such as sample attack or technique of separation.     

The indigenous origin of Witwatersrand “carbon”

In the Witwatersrand approximately 40% of the gold is intimately associated with so-called “carbon” in “carbon seam reefs”, which occur in over a dozen paleoplacers, many of them concentrated at two stratigraphic levels in the 7000-m-thick succession of Archean siliciclastic sedimentary rocks. This is reduced carbon, present as kerogen admixed in various proportions with derivative (now solid) bitumen(s). Oil generation and migration were active geological processes during Early Earth history. Numerous possible source rocks for oil generation, including the carbon seams themselves, occur within the Witwatersrand basin. In the Witwatersrand ore, oil-bearing fluid inclusions are also present, derived like the bitumen, by thermal maturation of the kerogen. The presence of kerogen and bitumen in the Witwatersrand sedimentary rocks, together with a wealth of observations on the spatial distribution of the carbon seams confirm that the carbon originated in situ from living organisms in microbial mat cover, as opposed to flowing in from elsewhere as liquid hydrocarbons as some researchers have suggested. Paleochannels, which truncated auriferous carbon seams early in the depositional history, are of widespread occurrence, and micro-synsedimentary faults offset carbon seams. The carbon seams are thus indigenous biogenic markers that grew contemporaneously with placer development. The various features highlighting the nature and spatial distribution of Witwatersrand carbon seams provide a classic case where field evidence trumps laboratory data in the reconstruction of geological processes.     

Platform subsidence mechanisms and “eustatic” sea-level changes

The boundaries between major world-wide sequences of sediments on continental platforms are due primarily to either eustatic changes or to systematic uplift of the continental interior. If thermal contraction of the lithosphere controls basin subsidence, basins would continue to subside during times of low eustatic sea level. Calculations indicate that significant gaps in the geological record could be produced by modest eustatic sealevel changes even in rapidly subsiding basins. For example, a 95 m withdrawal could have produced the sub-Devonian unconformity in the Michigan Basin. The vertical amplitude of eustatic variations can be determined directly from the depth of paleotopographic valleys (135m for sub-Pennsylvanian of Illinois Basin) and from the present elevation of sediments deposited during highstands (300 m above present sea level). The Illinois Basin aparently continued to subside during the sub-Pennsylvanian regression.     

The National Geodetic Survey project “POLARIS”

The National Geodetic Survey (N.G.S.) of the National Ocean Survey has undertaken a new project called POLar-motion Analysis by Radio Interferometric Surveying (POLA-RIS). The premier goal of the project is to establish a fully operational polar motion monitoring network, with a spatial resolution and accuracy of 10 cm and a temporal resolution of 24 hours. The new network will utilize radio interferometric techniques. The fixed POLARIS observatories may also serve as base stations to be used in conjunction with small-aperture, 3–10-m, mobile units for positional surveys for geodetic and geo-dynamic applications. The N.G.S. plans to cooperate fully with other governmental organizations having related responsibilities and interest in polar motion, earth rotation and geodynamics [e.g., National Aeronautics and Space Administration (NASA), United States Geological Survey (U.S.G.S.), United States Naval Observatory (U.S.N.O.)] as well as academic and private researchers.     

Isoprenoid alkanes with irregular “head-to-head” linkages

A lightly biodegraded crude oil from the Tolkinsk field (Upper Jurassic), situated in north-west Siberia, was found to contain a series of C₂₈–C₃₉ isoprenoid alkanes. Most of these components contain a pristane unit linked head-to-head with other isoprenoid units. The structures of these components were elucidated by mass spectral interpretations, comparisons with a synthesised standard and by reference to data published previously in the literature. These results extend the carbon number range, the variety of structural types, and the number of reported occurrences of these compounds in geological samples. These results provide further evidence for a contribution of bacterial cell-wall lipids to crude oils.     

Response to Thrift's “The future of geography”

Reviews and observations about the status of the discipline of geography, no matter how positive, invariably raise programmatic concerns. These concerns have a long history that arise from geography's struggles to find an identity that embraces its many parts and yet are consistent with the logic by which the academy partitions knowledge. Pedagogy and research historically claimed by geography is currently being reinvented and relabeled under such headings as “integrated environmental science” and “spatial science”, and these developments have the potential to change the breadth of the “geographic imagination”. Several observations about dominant explanatory perspectives and substantive domains of geographic enquiry are also provided.     

Thermal models of arcs and ridges — A “Source-span-sink” model

A theory of two-dimensional geothermic problems is elaborated by the active temperature function at the vertical contact of two horizontally layered media. The approach offered before for oceanic ridges is extended to the case of continental margins and the upper part of a descending slab, i.e. “sink”, in island-arc areas. It is assumed that the plate motion in the oceanic area exists; in a descending area it is directed downward but remains zero on a continental side. Mathematically it symbolizes a “source—span—sink” thermal model. Numerical parameters are given for a theoretical thermal model of the heat-flow profile across the Kuril island arc, from the trench through Iturup Island, Sakhalin Island and the Tatarian Trough.     

Experimental studies At 5–12 GPa of the Ondermatjie hypabyssal kimberlite

Liquidus and sub-liquidus phase relationships are reported for melts formed from an aphanitic kimberlite composition crystallized at 5–12 GPa and 900–1400 °C. The liquidus phase over the pressure range investigated is forsteritic olivine. This is followed with decreasing temperature by olivine plus garnet as the initial sub-liquidus solid phase assemblage. Supra-solidus assemblages consist of olivine+garnet+clinopyroxene+Mg-ilmenite+liquid at 5–7 GPa or olivine+garnet+clinopyroxene+hematite–ilmenite solid solutions (+/−perovskite)+liquid at 8–12 GPa. Phlogopite forms as a near-solidus phase only at 900 °C and 6 GPa. Orthopyroxene does not form at any temperature and pressure. All garnets formed at 6–7 GPa are Ti-rich almandine–grossular–pyrope solid solutions and not Cr-pyrope, whereas garnets formed above 8 GPa are Ti- and Fe³⁺-rich and have no natural counterparts. Quenched liquids are represented by magnesite at 10–12 GPa and Mg–Ca-carbonates at lower pressures. In addition to forming discrete crystals, Mg-ilmenite and hematite–ilmenite solid solutions occur as lamellar intergrowths that are identical in texture to naturally occurring intergrowths. Mg-ilmenite compositions at 6–7 GPa are similar to those of the natural occurrences, whereas clinopyroxenes are richer in Ca. The effects of graphite versus platinum capsules on the oxygen fugacity of the experimental charges and the composition of the olivine, clinopyroxene, Fe–Ti-oxides and garnets formed are described. These experimental data are interpreted to indicate that kimberlite magmas are unlikely to be formed by very small degrees of partial melting of a simple homogeneous carbonated garnet lherzolite mantle. It is proposed that kimberlite magmas form by extensive partial melting of metasomatized mantle, i.e. mineralogically complex carbonate-bearing veins in a lherzolitic/harzburgitic substrate, and that lamellar ilmenite–clinopyroxene intergrowths represent the products of non-equilibrium growth in kimberlite magma.     

“Normal” and “inverted” metamorphic isograds and their relation to syntectonic proterozoic batholiths in the Wopmay Orogen, Northwest Territories, Canada

Three progressive metamorphic suites are developed in pelitic rocks of the northern Wopmay Orogen. Two suites are related to the Hepburn Batholith and one to the Wentzel Batholith. All three suites are cut by post-metamorphic wrench faults, some of which have significant vertical displacement. The structural relief so provided reveals that medium-and high-grade isograds associated with the Hepburn Batholith dip inward towards the batholith and are thus “hot-side-up”. Isograds associated with the Wentzel Batholith dip away from the batholith and are thus “hot-side-down”. It is concluded that Hepburn Batholith has the form of the flattened funnel fed from depth, and that Wentzel Batholith is the arched roof of an intrusive complex of unknown shape at depth.     

“Rust” contamination of formation waters from producing wells

In the Alberta Basin there is a significant difference in the content of Fe between formation waters from drillstem tests and formation waters from producing wells. This was demonstrated using a data set comprising 525 formation waters from drillstem tests and 107 formation waters from producing wells. Both a cross-plot of Mn and Fe in the two sets of formation waters and box plots of the same data sets showed that formation waters from producing wells have dominantly Fe>Mn, compared with those from drillstem tests which are characterized by Mn>Fe. Suspecting that “rust” contamination from well casing and ancillary equipment was the cause, the pH values of the samples were compared to see if the two data sets also differed in pH. It was demonstrated that not only are formation waters from drillstem tests less acidic than those from producing wells, but there is a systematic statistical trend of increasing acidity with age of the strata (temperature, depth, and increased amounts of the acid gases — H₂S and CO₂). The difference between the pH of formation waters from drillstem tests and producing wells is attributed to the partial scrubbing of the acid gases from the fluids produced during the drillstem test; this results in less acidic formation waters. Vanadium may also be enhanced in formation waters from producing wells. This note reports these differences and cautions too much reliance on values for Fe in waters from producing wells.     

“Lag” — a geochemical sampling medium for arid regions

Desert land surfaces are commonly characterized by a veneer or pavement of siliceous and/or ferruginous stony material. This material can be shown in most cases to be predominantly bedrock-derived, despite often severe modification by prolonged weathering, and can therefore be selectively sampled and analyzed as an indicator of bedrock geochemistry in geochemical surveys.Most pavements probably owe their existence to the interaction of several dispersion mechanisms. However, a common factor in all cases is the concentration of coarse particles at the surface as a result of the selective removal by erosion of fine dilutant material. Hence, the preferred name when used in the geochemical context is “lag”.In lag sampling, particles in the range 2.0–6.0 mm are screened on site from the unconsolidated surface material. Material in this size range has been found to be quite uniformly distributed over a wide range of arid region environments, including areas where residual soils are severely diluted by transported alluvial and aeolian materials.Data from exploration programmes for Au, Cu-Pb-Zn-Ba, and Ni allow comparison of results for lag sampling with those for alternative sample media in a variety of arid region environments. Analysis of lag samples for Au, Cu and As clearly indicates the presence of bedrock Au mineralization in the Paterson and Eastern Goldfields Provinces of Western Australia. In these areas both lags and soils exhibit good anomaly contrast, but lags show more extensive lateral dispersion, leading to advantages in reconnaissance exploration.Strong anomalies for Ni and Cu are developed in lags, compared with subdued response in fine-fraction soils over a Ni sulphide occurrence in the Eastern Goldfields which has been subjected to deep lateritic weathering.Lag geochemistry also clearly reflects sub-economic base metal and barite occurrences in the McArthur Basin, N.T., in spite of the dilution of surface soils by sands probably related to a Mesozoic marine incursion. Orientation sampling over a Pb-Zn prospect in the Pine Creek Geosyncline has demonstrated optimum response in lag samples compared with various size fractions of the associated lithosols.Variable dilution of lag samples by coarse quartz sand can be a problem in areas with substantial transported overburden. A simple procedure to ‘correct’ trace-element values using regression analysis based on the Fe content of samples is described as a means of reducing ‘noise’ resulting from such matrix variations.     

The physics of “falling curtain” dry magnetic separation

The separation process in a “falling curtain” of particles is investigated in detail. Each particle experiences gravity, air drag and magnetic forces, as well as collisions with other particles. A simple kinetic theory model is used to model these processes and the separation distance between two different minerals is calculated. The maximum throughput of a superconducting magnet can be as high as 10 tons/hour per meter of effective magnet length, with a recovery in excess of 90%.